diff --git a/resource-overlay/device/Frameworks/Android.bp b/resource-overlay/device/Frameworks/Android.bp
index 6401448..d7e92bf 100644
--- a/resource-overlay/device/Frameworks/Android.bp
+++ b/resource-overlay/device/Frameworks/Android.bp
@@ -5,5 +5,5 @@
 
 runtime_resource_overlay {
     name: "FrameworksResTundra",
-    vendor: true
+    vendor: true,
 }
diff --git a/resource-overlay/device/Frameworks/AndroidManifest.xml b/resource-overlay/device/Frameworks/AndroidManifest.xml
index d1a3adb..1ac55e3 100644
--- a/resource-overlay/device/Frameworks/AndroidManifest.xml
+++ b/resource-overlay/device/Frameworks/AndroidManifest.xml
@@ -5,5 +5,9 @@
 -->
 <manifest xmlns:android="http://schemas.android.com/apk/res/android"
     package="android.overlay.tundra">
-    <overlay android:targetPackage="android" android:isStatic="true" android:priority="600"/>
+
+    <overlay
+        android:isStatic="true"
+        android:priority="600"
+        android:targetPackage="android" />
 </manifest>
diff --git a/resource-overlay/device/Frameworks/res/values/config.xml b/resource-overlay/device/Frameworks/res/values/config.xml
index 550500a..75bafc9 100644
--- a/resource-overlay/device/Frameworks/res/values/config.xml
+++ b/resource-overlay/device/Frameworks/res/values/config.xml
@@ -1,10 +1,53 @@
 <?xml version="1.0" encoding="utf-8"?>
 <!--
-     SPDX-FileCopyrightText: 2022-2024 The LineageOS Project
+     SPDX-FileCopyrightText: 2022-2025 The LineageOS Project
      SPDX-License-Identifier: Apache-2.0
 -->
 <resources>
-    <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support.
+    <!-- Indicate whether to allow the device to suspend when the screen is off
+         due to the proximity sensor.  This resource should only be set to true
+         if the sensor HAL correctly handles the proximity sensor as a wake-up source.
+         Otherwise, the device may fail to wake out of suspend reliably.
+         The default is false. -->
+    <bool name="config_suspendWhenScreenOffDueToProximity">true</bool>
+
+    <!-- Vibrator pattern for feedback about a long screen/key press -->
+    <integer-array name="config_longPressVibePattern">
+        <item>0</item>
+        <item>67</item>
+    </integer-array>
+
+    <!-- Vibrator pattern for feedback about touching a virtual key -->
+    <integer-array name="config_virtualKeyVibePattern">
+        <item>0</item>
+        <item>67</item>
+    </integer-array>
+
+    <!-- Vibrator pattern for feedback about booting with safe mode enabled -->
+    <integer-array name="config_safeModeEnabledVibePattern">
+        <item>0</item>
+        <item>0</item>
+        <item>94</item>
+    </integer-array>
+
+    <!-- Note: This setting is deprecated, please use
+    config_screenBrightnessSettingMinimumFloat instead -->
+    <integer name="config_screenBrightnessSettingMinimum">2</integer>
+
+    <!-- Stability requirements in milliseconds for accepting a new brightness level.  This is used
+         for debouncing the light sensor.  Different constants are used to debounce the light sensor
+         when adapting to brighter or darker environments.  This parameter controls how quickly
+         brightness changes occur in response to an observed change in light level that exceeds the
+         hysteresis threshold. -->
+    <integer name="config_autoBrightnessBrighteningLightDebounce">500</integer>
+    <integer name="config_autoBrightnessDarkeningLightDebounce">500</integer>
+
+    <!-- Screen brightness used to dim the screen when the user activity
+         timeout expires.  May be less than the minimum allowed brightness setting
+         that can be set by the user. -->
+    <integer name="config_screenBrightnessDim">2</integer>
+
+    <!-- Array of light sensor lux values to define our levels for auto backlight brightness support.
          The N entries of this array define N + 1 control points as follows:
          (1-based arrays)
 
@@ -16,15 +59,15 @@
 
          The control points must be strictly increasing.  Each control point
          corresponds to an entry in the brightness backlight values arrays.
-         For example, if LUX == level[1] (first element of the levels array)
+         For example, if lux == level[1] (first element of the levels array)
          then the brightness will be determined by value[2] (second element
          of the brightness values array).
 
          Spline interpolation is used to determine the auto-brightness
-         backlight values for LUX levels between these control points.
+         backlight values for lux levels between these control points.
 
          Must be overridden in platform specific overlays -->
-    <array name="config_autoBrightnessLevels">
+    <integer-array name="config_autoBrightnessLevels">
         <item>2</item>
         <item>4</item>
         <item>5</item>
@@ -35,11 +78,10 @@
         <item>1250</item>
         <item>3500</item>
         <item>5500</item>
-    </array>
+    </integer-array>
 
     <!-- Array of desired screen brightness in nits corresponding to the lux values
-         in the config_autoBrightnessLevels array. As with config_screenBrightnessMinimumNits and
-         config_screenBrightnessMaximumNits, the display brightness is defined as the measured
+         in the config_autoBrightnessLevels array. The display brightness is defined as the measured
          brightness of an all-white image.
 
          If this is defined then:
@@ -50,7 +92,7 @@
          This array should have size one greater than the size of the config_autoBrightnessLevels
          array. The brightness values must be non-negative and non-decreasing. This must be
          overridden in platform specific overlays -->
-    <array name="config_autoBrightnessDisplayValuesNits">
+    <integer-array name="config_autoBrightnessDisplayValuesNits">
         <item>2</item>
         <item>7</item>
         <item>10</item>
@@ -62,13 +104,13 @@
         <item>192</item>
         <item>252</item>
         <item>500</item>
-    </array>
+    </integer-array>
 
     <!-- An array describing the screen's backlight values corresponding to the brightness
          values in the config_screenBrightnessNits array.
 
          This array should be equal in size to config_screenBrightnessBacklight. -->
-    <array name="config_screenBrightnessBacklight">
+    <integer-array name="config_screenBrightnessBacklight">
         <item>0</item>
         <item>1</item>
         <item>6</item>
@@ -89,7 +131,7 @@
         <item>215</item>
         <item>238</item>
         <item>255</item>
-    </array>
+    </integer-array>
 
     <!-- An array of floats describing the screen brightness in nits corresponding to the backlight
          values in the config_screenBrightnessBacklight array.  On OLED displays these  values
@@ -98,7 +140,7 @@
          brightness modes but only the maximum brightness value obtainable in a sustainable manner.
 
          This array should be equal in size to config_screenBrightnessBacklight -->
-    <array name="config_screenBrightnessNits">
+    <integer-array name="config_screenBrightnessNits">
         <item>0</item>
         <item>2</item>
         <item>10</item>
@@ -119,45 +161,43 @@
         <item>380</item>
         <item>420</item>
         <item>450</item>
-    </array>
+    </integer-array>
 
-    <!-- Stability requirements in milliseconds for accepting a new brightness level.  This is used
-         for debouncing the light sensor.  Different constants are used to debounce the light sensor
-         when adapting to brighter or darker environments.  This parameter controls how quickly
-         brightness changes occur in response to an observed change in light level that exceeds the
-         hysteresis threshold. -->
-    <integer name="config_autoBrightnessBrighteningLightDebounce">500</integer>
-    <integer name="config_autoBrightnessDarkeningLightDebounce">500</integer>
+    <!-- MMS user agent string -->
+    <string name="config_mms_user_agent" translatable="false">motorolaedge30fusion</string>
 
-    <!-- The bounding path of the cutout region of the main built-in display.
-         Must either be empty if there is no cutout region, or a string that is parsable by
-         {@link android.util.PathParser}.
+    <!-- MMS user agent prolfile url -->
+    <string name="config_mms_user_agent_profile_url" translatable="false">http://uaprof.motorola.com/phoneconfig/motov1/Profile/motov1.rdf</string>
 
-         The path is assumed to be specified in display coordinates with pixel units and in
-         the display's native orientation, with the origin of the coordinate system at the
-         center top of the display. Optionally, you can append either `@left` or `@right` to the
-         end of the path string, in order to change the path origin to either the top left,
-         or top right of the display.
+    <!-- ComponentName of a dream to show whenever the system would otherwise have
+         gone to sleep.  When the PowerManager is asked to go to sleep, it will instead
+         try to start this dream if possible.  The dream should typically call startDozing()
+         to put the display into a low power state and allow the application processor
+         to be suspended.  When the dream ends, the system will go to sleep as usual.
+         Specify the component name or an empty string if none.
 
-         To facilitate writing device-independent emulation overlays, the marker `@dp` can be
-         appended after the path string to interpret coordinates in dp instead of px units.
-         Note that a physical cutout should be configured in pixels for the best results.
+         Note that doze dreams are not subject to the same start conditions as ordinary dreams.
+         Doze dreams will run whenever the power manager is in a dozing state. -->
+    <string name="config_dozeComponent" translatable="false">com.android.systemui/com.android.systemui.doze.DozeService</string>
 
-         Example for a 10px x 10px square top-center cutout:
-                <string ...>M -5,0 L -5,10 L 5,10 L 5,0 Z</string>
-         Example for a 10dp x 10dp square top-center cutout:
-                <string ...>M -5,0 L -5,10 L 5,10 L 5,0 Z @dp</string>
+    <!-- If true, the doze component is not started until after the screen has been
+         turned off and the screen off animation has been performed. -->
+    <bool name="config_dozeAfterScreenOffByDefault">true</bool>
 
-         @see https://www.w3.org/TR/SVG/paths.html#PathData
-         -->
-    <string translatable="false" name="config_mainBuiltInDisplayCutout">M -31,0 L -31,95 L 31,95 L 31,0 Z</string>
+    <!-- Type of the double tap sensor. Empty if double tap is not supported. -->
+    <string name="config_dozeDoubleTapSensorType" translatable="false">org.lineageos.sensor.double_tap</string>
 
-	<!-- Indicate whether to allow the device to suspend when the screen is off
-         due to the proximity sensor.  This resource should only be set to true
-         if the sensor HAL correctly handles the proximity sensor as a wake-up source.
-         Otherwise, the device may fail to wake out of suspend reliably.
-         The default is false. -->
-    <bool name="config_suspendWhenScreenOffDueToProximity">true</bool>
+    <!-- Type of the udfps long press sensor. Empty if long press is not supported. -->
+    <string name="config_dozeUdfpsLongPressSensorType" translatable="false">org.lineageos.sensor.udfps</string>
+
+    <!-- Control whether the always on display mode is available. This should only be enabled on
+         devices where the display has been tuned to be power efficient in DOZE and/or DOZE_SUSPEND
+         states. -->
+    <bool name="config_dozeAlwaysOnDisplayAvailable">true</bool>
+
+    <!-- Control whether the always on display mode is enabled by default. This value will be used
+         during initialization when the setting is still null. -->
+    <bool name="config_dozeAlwaysOnEnabled">false</bool>
 
     <!-- Power Management: Specifies whether to decouple the auto-suspend state of the
          device from the display on/off state.
@@ -179,14 +219,6 @@
     -->
     <bool name="config_powerDecoupleAutoSuspendModeFromDisplay">true</bool>
 
-    <!-- List of biometric sensors on the device, in decreasing strength. Consumed by AuthService
-         when registering authenticators with BiometricService. Format must be ID:Modality:Strength,
-         where: IDs are unique per device, Modality as defined in BiometricAuthenticator.java,
-         and Strength as defined in Authenticators.java -->
-    <array name="config_biometric_sensors" translatable="false" >
-        <item>0:2:15</item> <!-- ID0:Fingerprint:Strong -->
-    </array>
-
     <!-- Power Management: Specifies whether to decouple the interactive state of the
          device from the display on/off state.
 
@@ -206,93 +238,62 @@
     -->
     <bool name="config_powerDecoupleInteractiveModeFromDisplay">true</bool>
 
+    <!-- The bounding path of the cutout region of the main built-in display.
+         Must either be empty if there is no cutout region, or a string that is parsable by
+         {@link android.util.PathParser}.
+
+         The path is assumed to be specified in display coordinates with pixel units and in
+         the display's native orientation, with the origin of the coordinate system at the
+         center top of the display. Optionally, you can append either `@left` or `@right` to the
+         end of the path string, in order to change the path origin to either the top left,
+         or top right of the display.
+
+         To facilitate writing device-independent emulation overlays, the marker `@dp` can be
+         appended after the path string to interpret coordinates in dp instead of px units.
+         Note that a physical cutout should be configured in pixels for the best results.
+
+         If the display supports multiple resolutions, please define the path config based on the
+         highest resolution so that it can be scaled correctly in each resolution.
+
+         Example for a 10px x 10px square top-center cutout:
+                <string ...>M -5,0 L -5,10 L 5,10 L 5,0 Z</string>
+         Example for a 10dp x 10dp square top-center cutout:
+                <string ...>M -5,0 L -5,10 L 5,10 L 5,0 Z @dp</string>
+
+         @see https://www.w3.org/TR/SVG/paths.html#PathData
+         -->
+    <string name="config_mainBuiltInDisplayCutout" translatable="false">
+        M -31,0
+        L -31,95
+        L 31,95
+        L 31,0
+        Z
+    </string>
+
+    <!-- List of biometric sensors on the device, in decreasing strength. Consumed by AuthService
+         when registering authenticators with BiometricService. Format must be ID:Modality:Strength,
+         where: IDs are unique per device, Modality as defined in BiometricAuthenticator.java,
+         and Strength as defined in Authenticators.java -->
+    <string-array name="config_biometric_sensors" translatable="false">
+        <item>0:2:15</item> <!-- ID0:Fingerprint:Strong -->
+    </string-array>
+
     <!-- The properties of a UDFPS sensor in pixels, in the order listed below: -->
-    <integer-array name="config_udfps_sensor_props" translatable="false" >
+    <integer-array name="config_udfps_sensor_props" translatable="false">
         <item>540</item> <!-- sensorLocationX -->
         <item>2164</item> <!-- sensorLocationY -->
         <item>91</item> <!-- sensorRadius -->
     </integer-array>
 
-    <!-- Screen brightness used to dim the screen when the user activity
-         timeout expires.  May be less than the minimum allowed brightness setting
-         that can be set by the user. -->
-    <integer name="config_screenBrightnessDim">2</integer>
-
-    <!-- Minimum screen brightness setting allowed by the power manager.
-         The user is forbidden from setting the brightness below this level. -->
-    <integer name="config_screenBrightnessSettingMinimum">2</integer>
-
-    <!-- Vibrator pattern for feedback about a long screen/key press -->
-    <array name="config_longPressVibePattern">
-        <item>0</item>
-        <item>67</item>
-    </array>
-
-    <!-- Vibrator pattern for feedback about touching a virtual key -->
-    <array name="config_virtualKeyVibePattern">
-        <item>0</item>
-        <item>67</item>
-    </array>
-
-    <!-- Vibrator pattern for feedback about booting with safe mode enabled -->
-    <array name="config_safeModeEnabledVibePattern">
-        <item>0</item>
-        <item>0</item>
-        <item>94</item>
-    </array>
-
-    <!-- Vibrator pattern for feedback about hitting a scroll barrier -->
-    <array name="config_scrollBarrierVibePattern">
-        <item>0</item>
-        <item>15</item>
-        <item>30</item>
-        <item>15</item>
-    </array>
-
-    <!-- ComponentName of a dream to show whenever the system would otherwise have
-         gone to sleep.  When the PowerManager is asked to go to sleep, it will instead
-         try to start this dream if possible.  The dream should typically call startDozing()
-         to put the display into a low power state and allow the application processor
-         to be suspended.  When the dream ends, the system will go to sleep as usual.
-         Specify the component name or an empty string if none.
-         Note that doze dreams are not subject to the same start conditions as ordinary dreams.
-         Doze dreams will run whenever the power manager is in a dozing state. -->
-    <string name="config_dozeComponent">com.android.systemui/com.android.systemui.doze.DozeService</string>
-
-    <!-- If true, the doze component is not started until after the screen has been
-         turned off and the screen off animation has been performed. -->
-    <bool name="config_dozeAfterScreenOffByDefault">true</bool>
-
-    <!-- Whether the always on display mode is available. This should only be enabled
-         on devices where the display has been tuned to be power efficient in DOZE and/or
-         DOZE_SUSPEND states. -->
-    <bool name="config_dozeAlwaysOnDisplayAvailable">true</bool>
-
-    <!-- Control whether the always on display mode is enabled by default. This value will be used
-         during initialization when the setting is still null. -->
-    <bool name="config_dozeAlwaysOnEnabled">false</bool>
-
-    <!-- MMS user agent string -->
-    <string name="config_mms_user_agent" translatable="false">Android-Mms/2.0</string>
-    <!-- MMS user agent profile url -->
-    <string name="config_mms_user_agent_profile_url" translatable="false">http://www.google.com/oha/rdf/ua-profile-kila.xml</string>
-
-    <!-- Type of the double tap sensor. Empty if double tap is not supported. -->
-    <string name="config_dozeDoubleTapSensorType" translatable="false">org.lineageos.sensor.double_tap</string>
-
-    <!-- Type of the udfps long press sensor. Empty if long press is not supported. -->
-    <string name="config_dozeUdfpsLongPressSensorType" translatable="false">org.lineageos.sensor.udfps</string>
+    <!-- The default peak refresh rate for a given device. Change this value if you want to prevent
+         the framework from using higher refresh rates, even if display modes with higher refresh
+         rates are available from hardware composer. Only has an effect if the value is
+         non-zero. -->
+    <integer name="config_defaultPeakRefreshRate">120</integer>
 
     <!-- Whether the device enable the standalone (SA) mode of 5G NR.-->
     <bool name="config_telephony5gStandalone">true</bool>
 
     <!-- Whether the device enable the non-standalone (NSA) mode of 5G NR.-->
     <bool name="config_telephony5gNonStandalone">true</bool>
-
-    <!-- Preferred max refresh rate at AOD & Ambient Display, if supported by the display. -->
-    <integer name="config_aodMaxRefreshRate">48</integer>
-
-    <!-- The default peak refresh rate for a given device. Change this value if you want to allow
-         for higher refresh rates to be automatically used out of the box -->
-    <integer name="config_defaultPeakRefreshRate">120</integer>
 </resources>
diff --git a/resource-overlay/device/Frameworks/res/values/dimens.xml b/resource-overlay/device/Frameworks/res/values/dimens.xml
index 657f026..05bfbbe 100644
--- a/resource-overlay/device/Frameworks/res/values/dimens.xml
+++ b/resource-overlay/device/Frameworks/res/values/dimens.xml
@@ -1,30 +1,26 @@
 <?xml version="1.0" encoding="utf-8"?>
 <!--
-     SPDX-FileCopyrightText: 2022-2024 The LineageOS Project
+     SPDX-FileCopyrightText: 2022-2025 The LineageOS Project
      SPDX-License-Identifier: Apache-2.0
 -->
 <resources>
-    <!-- Radius of the software rounded corners. -->
-    <dimen name="rounded_corner_radius">85.0px</dimen>
-
-    <!-- Default paddings for content around the corners. -->
-    <dimen name="rounded_corner_content_padding">4px</dimen>
-
     <!-- The default height of the status bar used in {@link SystemBarUtils#getStatusBarHeight} to
          calculate the status bar height. -->
-    <dimen name="status_bar_height_default">126px</dimen>
+    <dimen name="status_bar_height_default">28dp</dimen>
 
-    <!-- Height of the status bar in portrait. The height should be
-         Max((status bar content height + waterfall top size), top cutout size) -->
-    <dimen name="status_bar_height_portrait">@dimen/status_bar_height_default</dimen>
+    <!-- Height of the status bar in portrait.
+         Do not read this dimen directly. Use {@link SystemBarUtils#getStatusBarHeight} instead.
+         -->
+    <dimen name="status_bar_height_portrait">126px</dimen>
 
     <!-- Height of the status bar in landscape.
          Do not read this dimen directly. Use {@link SystemBarUtils#getStatusBarHeight} instead.
          -->
-    <dimen name="status_bar_height_landscape">14dip</dimen>
+    <dimen name="status_bar_height_landscape">28dp</dimen>
 
-    <!-- Height of area above QQS where battery/time go.
-         Do not read this dimen directly. Use {@link SystemBarUtils#getQuickQsOffsetHeight} instead.
-         -->
-    <dimen name="quick_qs_offset_height">@dimen/status_bar_height_default</dimen>
+    <!-- Default radius of the software rounded corners. -->
+    <dimen name="rounded_corner_radius">85.0px</dimen>
+
+    <!-- Default paddings for content around the corners. -->
+    <dimen name="rounded_corner_content_padding">4px</dimen>
 </resources>
diff --git a/resource-overlay/device/LineageSystemUI/res/values/config.xml b/resource-overlay/device/LineageSystemUI/res/values/config.xml
deleted file mode 100644
index 8cdb9a9..0000000
--- a/resource-overlay/device/LineageSystemUI/res/values/config.xml
+++ /dev/null
@@ -1,37 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--
-     SPDX-FileCopyrightText: 2022 The LineageOS Project
-     SPDX-License-Identifier: Apache-2.0
--->
-<resources>
-    <!-- Hardware keys present on the device, stored as a bit field.
-         This integer should equal the sum of the corresponding value for each
-         of the following keys present:
-             1 - Home
-             2 - Back
-             4 - Menu
-             8 - Assistant (search)
-            16 - App switch
-            32 - Camera
-            64 - Volume rocker
-         For example, a device with Home, Back and Menu keys would set this
-         config to 7. -->
-    <integer name="config_deviceHardwareKeys">64</integer>
-
-    <!-- Hardware keys present on the device with the ability to wake, stored as a bit field.
-         This integer should equal the sum of the corresponding value for each
-         of the following keys present:
-             1 - Home
-             2 - Back
-             4 - Menu
-             8 - Assistant (search)
-            16 - App switch
-            32 - Camera
-            64 - Volume rocker
-         For example, a device with Home, Back and Menu keys would set this
-         config to 7. -->
-    <integer name="config_deviceHardwareWakeKeys">64</integer>
-
-    <!-- Color of the UDFPS pressed view -->
-    <color name="config_udfpsColor">#ffffff</color>
-</resources>
diff --git a/resource-overlay/device/LineageSystemUI/res/values/lineage_config.xml b/resource-overlay/device/LineageSystemUI/res/values/lineage_config.xml
new file mode 100644
index 0000000..d169418
--- /dev/null
+++ b/resource-overlay/device/LineageSystemUI/res/values/lineage_config.xml
@@ -0,0 +1,12 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     SPDX-FileCopyrightText: 2022-2025 The LineageOS Project
+     SPDX-License-Identifier: Apache-2.0
+-->
+<resources>
+    <!-- Doze: does the double tap sensor need a proximity check? -->
+    <bool name="doze_double_tap_proximity_check">true</bool>
+
+    <!-- Doze: does the long press sensor need a proximity check? -->
+    <bool name="doze_long_press_proximity_check">true</bool>
+</resources>
diff --git a/resource-overlay/device/Settings/Android.bp b/resource-overlay/device/Settings/Android.bp
index 9cc8e10..c937247 100644
--- a/resource-overlay/device/Settings/Android.bp
+++ b/resource-overlay/device/Settings/Android.bp
@@ -5,5 +5,5 @@
 
 runtime_resource_overlay {
     name: "SettingsResTundra",
-    vendor: true
+    vendor: true,
 }
diff --git a/resource-overlay/device/Settings/AndroidManifest.xml b/resource-overlay/device/Settings/AndroidManifest.xml
index 3324d2e..a29bf72 100644
--- a/resource-overlay/device/Settings/AndroidManifest.xml
+++ b/resource-overlay/device/Settings/AndroidManifest.xml
@@ -4,7 +4,10 @@
      SPDX-License-Identifier: Apache-2.0
 -->
 <manifest xmlns:android="http://schemas.android.com/apk/res/android"
-    coreApp="true"
     package="com.android.settings.overlay.tundra">
-    <overlay android:targetPackage="com.android.settings" android:isStatic="true" android:priority="600" />
+
+    <overlay
+        android:isStatic="true"
+        android:priority="600"
+        android:targetPackage="com.android.settings" />
 </manifest>
diff --git a/resource-overlay/device/Settings/res/values/config.xml b/resource-overlay/device/Settings/res/values/config.xml
index fbf4375..a911f6d 100644
--- a/resource-overlay/device/Settings/res/values/config.xml
+++ b/resource-overlay/device/Settings/res/values/config.xml
@@ -1,14 +1,12 @@
 <?xml version="1.0" encoding="utf-8"?>
 <!--
-     SPDX-FileCopyrightText: 2022 The LineageOS Project
+     SPDX-FileCopyrightText: 2022-2025 The LineageOS Project
      SPDX-License-Identifier: Apache-2.0
 -->
-<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
-
+<resources>
     <!-- Whether to show a preference item for regulatory information in About phone -->
     <bool name="config_show_regulatory_info">true</bool>
 
     <!-- The radius of the enrollment progress bar, in dp -->
     <integer name="config_udfpsEnrollProgressBar">144</integer>
-
 </resources>
diff --git a/resource-overlay/device/SettingsProvider/AndroidManifest.xml b/resource-overlay/device/SettingsProvider/AndroidManifest.xml
index 9376dfa..4419879 100644
--- a/resource-overlay/device/SettingsProvider/AndroidManifest.xml
+++ b/resource-overlay/device/SettingsProvider/AndroidManifest.xml
@@ -4,7 +4,9 @@
      SPDX-License-Identifier: Apache-2.0
 -->
 <manifest xmlns:android="http://schemas.android.com/apk/res/android"
-    coreApp="true"
     package="com.android.providers.settings.overlay.tundra">
-    <overlay android:targetPackage="com.android.providers.settings" android:isStatic="true" />
+
+    <overlay
+        android:isStatic="true"
+        android:targetPackage="com.android.providers.settings" />
 </manifest>
diff --git a/resource-overlay/device/SettingsProvider/res/values/config.xml b/resource-overlay/device/SettingsProvider/res/values/defaults.xml
similarity index 80%
rename from resource-overlay/device/SettingsProvider/res/values/config.xml
rename to resource-overlay/device/SettingsProvider/res/values/defaults.xml
index 6839c3f..c182241 100644
--- a/resource-overlay/device/SettingsProvider/res/values/config.xml
+++ b/resource-overlay/device/SettingsProvider/res/values/defaults.xml
@@ -1,6 +1,6 @@
 <?xml version="1.0" encoding="utf-8"?>
 <!--
-     SPDX-FileCopyrightText: 2022 The LineageOS Project
+     SPDX-FileCopyrightText: 2022-2025 The LineageOS Project
      SPDX-License-Identifier: Apache-2.0
 -->
 <resources>
diff --git a/resource-overlay/device/SystemUI/Android.bp b/resource-overlay/device/SystemUI/Android.bp
index d4b9c86..6557504 100644
--- a/resource-overlay/device/SystemUI/Android.bp
+++ b/resource-overlay/device/SystemUI/Android.bp
@@ -5,5 +5,5 @@
 
 runtime_resource_overlay {
     name: "SystemUIResTundra",
-    vendor: true
+    vendor: true,
 }
diff --git a/resource-overlay/device/SystemUI/AndroidManifest.xml b/resource-overlay/device/SystemUI/AndroidManifest.xml
index c9971a1..3851424 100644
--- a/resource-overlay/device/SystemUI/AndroidManifest.xml
+++ b/resource-overlay/device/SystemUI/AndroidManifest.xml
@@ -4,7 +4,9 @@
      SPDX-License-Identifier: Apache-2.0
 -->
 <manifest xmlns:android="http://schemas.android.com/apk/res/android"
-    coreApp="true"
     package="com.android.systemui.overlay.tundra">
-    <overlay android:targetPackage="com.android.systemui" android:isStatic="true" />
+
+    <overlay
+        android:isStatic="true"
+        android:targetPackage="com.android.systemui" />
 </manifest>
diff --git a/resource-overlay/device/SystemUI/res/values/config.xml b/resource-overlay/device/SystemUI/res/values/config.xml
deleted file mode 100644
index 580307e..0000000
--- a/resource-overlay/device/SystemUI/res/values/config.xml
+++ /dev/null
@@ -1,12 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--
-     SPDX-FileCopyrightText: 2022-2024 The LineageOS Project
-     SPDX-License-Identifier: Apache-2.0
--->
-<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
-
-    <!-- Microns/ums (1000 um = 1mm) per pixel for the given device. If unspecified, UI that
-         relies on this value will not be sized correctly. -->
-    <item name="pixel_pitch" format="float" type="dimen">48.3</item>
-
-</resources>
diff --git a/resource-overlay/device/SystemUI/res/values/dimens.xml b/resource-overlay/device/SystemUI/res/values/dimens.xml
index e9582f0..0049fd6 100644
--- a/resource-overlay/device/SystemUI/res/values/dimens.xml
+++ b/resource-overlay/device/SystemUI/res/values/dimens.xml
@@ -1,16 +1,16 @@
 <?xml version="1.0" encoding="utf-8"?>
 <!--
-     SPDX-FileCopyrightText: 2022-2024 The LineageOS Project
+     SPDX-FileCopyrightText: 2022-2025 The LineageOS Project
      SPDX-License-Identifier: Apache-2.0
 -->
 <resources>
     <!-- the padding on the start of the statusbar -->
     <dimen name="status_bar_padding_start">20.0dip</dimen>
 
-    <!-- The padding on the end of the statusbar -->
+    <!-- the padding on the end of the statusbar -->
     <dimen name="status_bar_padding_end">7.0dip</dimen>
 
-    <!-- The padding on the top of the statusbar (usually 0) -->
+    <!-- the padding on the top of the statusbar (usually 0) -->
     <dimen name="status_bar_padding_top">20.0px</dimen>
 
     <!-- Height of the status bar header bar when on Keyguard -->
@@ -19,16 +19,17 @@
     <!-- Margin on the left side of the carrier text on Keyguard -->
     <dimen name="keyguard_carrier_text_margin">16.0dip</dimen>
 
-    <!-- Margin on the right side of the system icon group on Keyguard. -->
-    <dimen name="system_icons_keyguard_padding_end">10.0px</dimen>
-
     <!-- Bottom margin size when fingerprint in display is active -->
     <dimen name="keyguard_indication_margin_bottom">15dp</dimen>
 
-    <!-- Location on the screen of the center of the physical power button. -->
+    <!--  Total minimum padding to enforce to ensure that the dot can always show  -->
+    <dimen name="ongoing_appops_dot_min_padding">14dp</dimen>
+
+    <!-- Location on the screen of the center of the physical power button. This is a reasonable
+    default that should be overridden by device-specific overlays. -->
     <dimen name="physical_power_button_center_screen_location_y">760.0px</dimen>
 
-    <!-- Location on the screen of the center of the physical volume up/down buttons. -->
-    <dimen name="physical_volume_up_button_center_screen_location_y">360.0px</dimen>
-    <dimen name="physical_volume_down_button_center_screen_location_y">520.0px</dimen>
+    <!-- Microns/ums (1000 um = 1mm) per pixel for the given device. If unspecified, UI that
+         relies on this value will not be sized correctly. -->
+    <item format="float" name="pixel_pitch" type="dimen">48.3</item>
 </resources>
diff --git a/resource-overlay/device/SystemUI/res/values/integers.xml b/resource-overlay/device/SystemUI/res/values/integers.xml
deleted file mode 100644
index e4ae05c..0000000
--- a/resource-overlay/device/SystemUI/res/values/integers.xml
+++ /dev/null
@@ -1,8 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--
-     SPDX-FileCopyrightText: 2022 The LineageOS Project
-     SPDX-License-Identifier: Apache-2.0
--->
-<resources>
-    <integer name="config_showUsbPortAlarm">1</integer>
-</resources>
diff --git a/resource-overlay/device/Wifi/res/values/config.xml b/resource-overlay/device/Wifi/res/values/config.xml
index e00de6d..7105737 100644
--- a/resource-overlay/device/Wifi/res/values/config.xml
+++ b/resource-overlay/device/Wifi/res/values/config.xml
@@ -1,11 +1,9 @@
 <?xml version="1.0" encoding="utf-8"?>
 <!--
-     SPDX-FileCopyrightText: 2021 The LineageOS Project
+     SPDX-FileCopyrightText: 2022-2025 The LineageOS Project
      SPDX-License-Identifier: Apache-2.0
 -->
 <resources>
-
-    <!-- Default access point SSID used for tethering -->
+    <!-- Do not translate. Default access point SSID used for tethering -->
     <string name="wifi_tether_configure_ssid_default" translatable="false">motorola edge 30 fusion</string>
-
 </resources>