Changes in 4.9.68
bcache: only permit to recovery read error when cache device is clean
bcache: recover data from backing when data is clean
drm/fsl-dcu: avoid disabling pixel clock twice on suspend
drm/fsl-dcu: enable IRQ before drm_atomic_helper_resume()
Revert "crypto: caam - get rid of tasklet"
mm, oom_reaper: gather each vma to prevent leaking TLB entry
uas: Always apply US_FL_NO_ATA_1X quirk to Seagate devices
usb: quirks: Add no-lpm quirk for KY-688 USB 3.1 Type-C Hub
serial: 8250_pci: Add Amazon PCI serial device ID
s390/runtime instrumentation: simplify task exit handling
USB: serial: option: add Quectel BG96 id
ima: fix hash algorithm initialization
s390/pci: do not require AIS facility
selftests/x86/ldt_get: Add a few additional tests for limits
staging: greybus: loopback: Fix iteration count on async path
m68k: fix ColdFire node shift size calculation
serial: 8250_fintek: Fix rs485 disablement on invalid ioctl()
staging: rtl8188eu: avoid a null dereference on pmlmepriv
spi: sh-msiof: Fix DMA transfer size check
spi: spi-axi: fix potential use-after-free after deregistration
mmc: sdhci-msm: fix issue with power irq
usb: phy: tahvo: fix error handling in tahvo_usb_probe()
serial: 8250: Preserve DLD[7:4] for PORT_XR17V35X
x86/entry: Use SYSCALL_DEFINE() macros for sys_modify_ldt()
EDAC, sb_edac: Fix missing break in switch
sysrq : fix Show Regs call trace on ARM
usbip: tools: Install all headers needed for libusbip development
perf test attr: Fix ignored test case result
kprobes/x86: Disable preemption in ftrace-based jprobes
tools include: Do not use poison with C++
iio: adc: ti-ads1015: add 10% to conversion wait time
dax: Avoid page invalidation races and unnecessary radix tree traversals
net/mlx4_en: Fix type mismatch for 32-bit systems
l2tp: take remote address into account in l2tp_ip and l2tp_ip6 socket lookups
dmaengine: stm32-dma: Set correct args number for DMA request from DT
dmaengine: stm32-dma: Fix null pointer dereference in stm32_dma_tx_status
usb: gadget: f_fs: Fix ExtCompat descriptor validation
libcxgb: fix error check for ip6_route_output()
net: systemport: Utilize skb_put_padto()
net: systemport: Pad packet before inserting TSB
ARM: OMAP2+: Fix WL1283 Bluetooth Baud Rate
ARM: OMAP1: DMA: Correct the number of logical channels
vti6: fix device register to report IFLA_INFO_KIND
be2net: fix accesses to unicast list
be2net: fix unicast list filling
net/appletalk: Fix kernel memory disclosure
libfs: Modify mount_pseudo_xattr to be clear it is not a userspace mount
net: qrtr: Mark 'buf' as little endian
mm: fix remote numa hits statistics
mac80211: calculate min channel width correctly
ravb: Remove Rx overflow log messages
nfs: Don't take a reference on fl->fl_file for LOCK operation
drm/exynos/decon5433: update shadow registers iff there are active windows
drm/exynos/decon5433: set STANDALONE_UPDATE_F also if planes are disabled
KVM: arm/arm64: Fix occasional warning from the timer work function
mac80211: prevent skb/txq mismatch
NFSv4: Fix client recovery when server reboots multiple times
perf/x86/intel: Account interrupts for PEBS errors
powerpc/mm: Fix memory hotplug BUG() on radix
qla2xxx: Fix wrong IOCB type assumption
drm/amdgpu: fix bug set incorrect value to vce register
drm/exynos/decon5433: set STANDALONE_UPDATE_F on output enablement
net: sctp: fix array overrun read on sctp_timer_tbl
x86/fpu: Set the xcomp_bv when we fake up a XSAVES area
drm/amdgpu: fix unload driver issue for virtual display
mac80211: don't try to sleep in rate_control_rate_init()
RDMA/qedr: Return success when not changing QP state
RDMA/qedr: Fix RDMA CM loopback
tipc: fix nametbl_lock soft lockup at module exit
tipc: fix cleanup at module unload
dmaengine: pl330: fix double lock
tcp: correct memory barrier usage in tcp_check_space()
i2c: i2c-cadence: Initialize configuration before probing devices
nvmet: cancel fatal error and flush async work before free controller
gtp: clear DF bit on GTP packet tx
gtp: fix cross netns recv on gtp socket
net: phy: micrel: KSZ8795 do not set SUPPORTED_[Asym_]Pause
net: thunderx: avoid dereferencing xcv when NULL
be2net: fix initial MAC setting
vfio/spapr: Fix missing mutex unlock when creating a window
mm: avoid returning VM_FAULT_RETRY from ->page_mkwrite handlers
xen-netfront: Improve error handling during initialization
cec: initiator should be the same as the destination for, poll
xen-netback: vif counters from int/long to u64
net: fec: fix multicast filtering hardware setup
dma-buf/dma-fence: Extract __dma_fence_is_later()
dma-buf/sw-sync: Fix the is-signaled test to handle u32 wraparound
dma-buf/sw-sync: Prevent user overflow on timeline advance
dma-buf/sw-sync: Reduce irqsave/irqrestore from known context
dma-buf/sw-sync: sync_pt is private and of fixed size
dma-buf/sw-sync: Fix locking around sync_timeline lists
dma-buf/sw-sync: Use an rbtree to sort fences in the timeline
dma-buf/sw_sync: move timeline_fence_ops around
dma-buf/sw_sync: clean up list before signaling the fence
dma-fence: Clear fence->status during dma_fence_init()
dma-fence: Wrap querying the fence->status
dma-fence: Introduce drm_fence_set_error() helper
dma-buf/sw_sync: force signal all unsignaled fences on dying timeline
dma-buf/sync_file: hold reference to fence when creating sync_file
dma-buf: Update kerneldoc for sync_file_create
usb: hub: Cycle HUB power when initialization fails
usb: xhci: fix panic in xhci_free_virt_devices_depth_first
USB: core: Add type-specific length check of BOS descriptors
USB: Increase usbfs transfer limit
USB: devio: Prevent integer overflow in proc_do_submiturb()
USB: usbfs: Filter flags passed in from user space
usb: host: fix incorrect updating of offset
xen-netfront: avoid crashing on resume after a failure in talk_to_netback()
Linux 4.9.68
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit 6ae8eefc6c8fe050f057781b70a83262eb0a61ee ]
LIST_POISON[12] are used to initialize list_head and hlist_node
pointers, and do void pointer arithmetic, which C++ doesn't like, so, to
avoid drifting from the kernel by introducing some HLIST_POISON to do
away with void pointer math, just make those poisoned pointers be NULL
when building it with a C++ compiler.
Noticed with:
$ make LLVM_CONFIG=/usr/bin/llvm-config-3.9 LIBCLANGLLVM=1
CXX util/c++/clang.o
CXX util/c++/clang-test.o
In file included from /home/lizj/linux/tools/include/linux/list.h:5:0,
from /home/lizj/linux/tools/perf/util/namespaces.h:13,
from /home/lizj/linux/tools/perf/util/util.h:15,
from /home/lizj/linux/tools/perf/util/util-cxx.h:20,
from util/c++/clang-c.h:5,
from util/c++/clang-test.cpp:2:
/home/lizj/linux/tools/include/linux/list.h: In function ‘void list_del(list_head*)’:
/home/lizj/linux/tools/include/linux/poison.h:14:31: error: pointer of type ‘void *’ used in arithmetic [-Werror=pointer-arith]
# define POISON_POINTER_DELTA 0
^
/home/lizj/linux/tools/include/linux/poison.h:22:41: note: in expansion of macro ‘POISON_POINTER_DELTA’
#define LIST_POISON1 ((void *) 0x100 + POISON_POINTER_DELTA)
^
/home/lizj/linux/tools/include/linux/list.h:107:16: note: in expansion of macro ‘LIST_POISON1’
entry->next = LIST_POISON1;
^
In file included from /home/lizj/linux/tools/perf/util/namespaces.h:13:0,
from /home/lizj/linux/tools/perf/util/util.h:15,
from /home/lizj/linux/tools/perf/util/util-cxx.h:20,
from util/c++/clang-c.h:5,
from util/c++/clang-test.cpp:2:
/home/lizj/linux/tools/include/linux/list.h:107:14: error: invalid conversion from ‘void*’ to ‘list_head*’ [-fpermissive]
Reported-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Philip Li <philip.li@intel.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-m5ei2o0mjshucbr28baf5lqz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes in 4.9.38
mqueue: fix a use-after-free in sys_mq_notify()
Add "shutdown" to "struct class".
tpm: Issue a TPM2_Shutdown for TPM2 devices.
tools include: Add a __fallthrough statement
tools string: Use __fallthrough in perf_atoll()
tools strfilter: Use __fallthrough
perf top: Use __fallthrough
perf thread_map: Correctly size buffer used with dirent->dt_name
perf intel-pt: Use __fallthrough
perf tests: Avoid possible truncation with dirent->d_name + snprintf
perf bench numa: Avoid possible truncation when using snprintf()
perf header: Fix handling of PERF_EVENT_UPDATE__SCALE
perf scripting perl: Fix compile error with some perl5 versions
perf probe: Fix to probe on gcc generated symbols for offline kernel
perf probe: Add error checks to offline probe post-processing
md: fix incorrect use of lexx_to_cpu in does_sb_need_changing
md: fix super_offset endianness in super_1_rdev_size_change
locking/rwsem-spinlock: Fix EINTR branch in __down_write_common()
staging: vt6556: vnt_start Fix missing call to vnt_key_init_table.
staging: comedi: fix clean-up of comedi_class in comedi_init()
crypto: caam - fix gfp allocation flags (part I)
crypto: rsa-pkcs1pad - use constant time memory comparison for MACs
ext4: check return value of kstrtoull correctly in reserved_clusters_store
x86/mm/pat: Don't report PAT on CPUs that don't support it
saa7134: fix warm Medion 7134 EEPROM read
Linux 4.9.38
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit b5bf1733d6a391c4e90ea8f8468d83023be74a2a upstream.
For cases where implicit fall through case labels are intended,
to let us inform that to gcc >= 7:
CC /tmp/build/perf/util/string.o
util/string.c: In function 'perf_atoll':
util/string.c:22:7: error: this statement may fall through [-Werror=implicit-fallthrough=]
if (*p)
^
util/string.c:24:3: note: here
case '\0':
^~~~
So we introduce:
#define __fallthrough __attribute__ ((fallthrough))
And use it in such cases.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: William Cohen <wcohen@redhat.com>
Link: http://lkml.kernel.org/n/tip-qnpig0xfop4hwv6k4mv1wts5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cherry-pick from commit 6acc5c2910689fc6ee181bf63085c5efff6a42bd
Returns the owner uid of the socket inside a sk_buff. This is useful to
perform per-UID accounting of network traffic or per-UID packet
filtering. The socket need to be a fullsock otherwise overflowuid is
returned.
Signed-off-by: Chenbo Feng <fengc@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bug: 30950746
Change-Id: Idc00947ccfdd4e9f2214ffc4178d701cd9ead0ac
Cherrypick from commit: 91b8270f2a4d1d9b268de90451cdca63a70052d6
Retrieve the socket cookie generated by sock_gen_cookie() from a sk_buff
with a known socket. Generates a new cookie if one was not yet set.If
the socket pointer inside sk_buff is NULL, 0 is returned. The helper
function coud be useful in monitoring per socket networking traffic
statistics and provide a unique socket identifier per namespace.
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Chenbo Feng <fengc@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bug: 30950746
Change-Id: I95918dcc3ceffb3061495a859d28aee88e3cde3c
Update the missing bpf helper function name in bpf_func_id to keep the
uapi header consistent with upstream uapi header because we need the
new added bpf helper function bpf get_socket_cookie and get_socket_uid.
The patch related to those headers are not backetported since they are
not related and backport them will bring in extra confilict.
Signed-off-by: Chenbo Feng <fengc@google.com>
Bug: 30950746
Change-Id: I2b5fd03799ac5f2e3243ab11a1bccb932f06c312
commit 474c90156c8dcc2fa815e6716cc9394d7930cb9c upstream.
gcc-7 has an "optimization" pass that completely screws up, and
generates the code expansion for the (impossible) case of calling
ilog2() with a zero constant, even when the code gcc compiles does not
actually have a zero constant.
And we try to generate a compile-time error for anybody doing ilog2() on
a constant where that doesn't make sense (be it zero or negative). So
now gcc7 will fail the build due to our sanity checking, because it
created that constant-zero case that didn't actually exist in the source
code.
There's a whole long discussion on the kernel mailing about how to work
around this gcc bug. The gcc people themselevs have discussed their
"feature" in
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=72785
but it's all water under the bridge, because while it looked at one
point like it would be solved by the time gcc7 was released, that was
not to be.
So now we have to deal with this compiler braindamage.
And the only simple approach seems to be to just delete the code that
tries to warn about bad uses of ilog2().
So now "ilog2()" will just return 0 not just for the value 1, but for
any non-positive value too.
It's not like I can recall anybody having ever actually tried to use
this function on any invalid value, but maybe the sanity check just
meant that such code never made it out in public.
Reported-by: Laura Abbott <labbott@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>,
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 651be3cb085341a21847e47c694c249c3e1e4e5b)
We only support breakpoint/watchpoint of length 1, 2, 4 and 8. If we can
support other length as well, then user may watch more data with less
number of watchpoints (provided hardware supports it). For example: if we
have to watch only 4th, 5th and 6th byte from a 64 bit aligned address, we
will have to use two slots to implement it currently. One slot will watch a
half word at offset 4 and other a byte at offset 6. If we can have a
watchpoint of length 3 then we can watch it with single slot as well.
ARM64 hardware does support such functionality, therefore adding these new
definitions in generic layer.
Signed-off-by: Pratyush Anand <panand@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Pavel Labath <labath@google.com>
Change-Id: Ie17ed89ca526e4fddf591bb4e556fdfb55fc2eac
Bug: 30919905
Some mmap related macros have different values for different
architectures. This patch introduces uapi mman.h for each
architectures.
Three headers are cloned from kernel include to tools/include:
tools/include/uapi/asm-generic/mman-common.h
tools/include/uapi/asm-generic/mman.h
tools/include/uapi/linux/mman.h
The main part of this patch is generated by following script:
macros=`cat $0 | awk 'V==1 {print}; /^# start macro list/ {V=1}'`
for arch in `ls tools/arch`
do
[ -d tools/arch/$arch/include/uapi/asm ] || mkdir -p tools/arch/$arch/include/uapi/asm
src=arch/$arch/include/uapi/asm/mman.h
target=tools/arch/$arch/include/uapi/asm/mman.h
guard="TOOLS_ARCH_"`echo $arch | awk '{print toupper($0)}'`_UAPI_ASM_MMAN_FIX_H
echo '#ifndef '$guard > $target
echo '#define '$guard >> $target
[ -f $src ] &&
for m in $macros
do
if grep '#define[ \t]*'$m $src > /dev/null 2>&1
then
grep -h '#define[ \t]*'$m $src | sed 's/[ \t]*\/\*.*$//g' >> $target
fi
done
if [ -f $src ]
then
grep '#include <asm-generic' $src >> $target
else
echo "#include <asm-generic/mman.h>" >> $target
fi
echo '#endif' >> $target
echo "$target"
done
exit 0
# Following macros are extracted from:
# tools/perf/trace/beauty/mmap.c
#
# start macro list
MADV_DODUMP
MADV_DOFORK
MADV_DONTDUMP
MADV_DONTFORK
MADV_DONTNEED
MADV_HUGEPAGE
MADV_HWPOISON
MADV_MERGEABLE
MADV_NOHUGEPAGE
MADV_NORMAL
MADV_RANDOM
MADV_REMOVE
MADV_SEQUENTIAL
MADV_SOFT_OFFLINE
MADV_UNMERGEABLE
MADV_WILLNEED
MAP_32BIT
MAP_ANONYMOUS
MAP_DENYWRITE
MAP_EXECUTABLE
MAP_FILE
MAP_FIXED
MAP_GROWSDOWN
MAP_HUGETLB
MAP_LOCKED
MAP_NONBLOCK
MAP_NORESERVE
MAP_POPULATE
MAP_PRIVATE
MAP_SHARED
MAP_STACK
MAP_UNINITIALIZED
MREMAP_FIXED
MREMAP_MAYMOVE
PROT_EXEC
PROT_GROWSDOWN
PROT_GROWSUP
PROT_NONE
PROT_READ
PROT_SEM
PROT_WRITE
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1473684871-209320-2-git-send-email-wangnan0@huawei.com
[ Added new files to tools/perf/MANIFEST to fix the detached tarball build, add mman.h for ARC ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf tools build in recent kernels spews splat when cross compiling with uClibc:
| CC util/alias.o
| In file included from tools/perf/util/../ui/../util/cache.h:8:0,
| from tools/perf/util/../ui/helpline.h:7,
| from tools/perf/util/debug.h:8,
| from arch/../util/cpumap.h:9,
| from arch/../util/env.h:5,
| from arch/common.h:4,
| from arch/common.c:3:
| tools/include/linux/string.h:12:15: warning: redundant redeclaration of ‘strlcpy’ [-Wredundant-decls]
| extern size_t strlcpy(char *dest, const char *src, size_t size);
^
This is after commit 61a6445e46 ("tools lib: Guard the strlcpy() header with
__GLIBC__").
The problem is uClibc also defines __GLIBC__ for exported headers for
applications. So add that specific check to not trip for uClibc.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petri Gynther <pgynther@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: linux-snps-arc@lists.infradead.org
Link: http://lkml.kernel.org/r/1471537703-16439-1-git-send-email-vgupta@synopsys.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The way we're using kernel headers in tools/ now, with a copy that is
made to the same path prefixed by "tools/" plus checking if that copy
got stale, i.e. if the kernel counterpart changed, helps in keeping
track with new features that may be useful for tools to exploit.
For instance, looking at all the changes to bpf.h since it was last
copied to tools/include brings this to toolers' attention:
Need to investigate this one to check how to run a program via perf, setting up
a BPF event, that will take advantage of the way perf already calls clang/LLVM,
sets up the event and runs the workload in a single command line, helping in
debugging such semi cooperative programs:
96ae522795 ("bpf: Add bpf_probe_write_user BPF helper to be called in tracers")
This one needs further investigation about using the feature it improves
in 'perf trace' to do some tcpdumpin' mixed with syscalls, tracepoints,
probe points, callgraphs, etc:
555c8a8623 ("bpf: avoid stack copy and use skb ctx for event output")
Add tracing just packets that are related to some container to that mix:
4a482f34af ("cgroup: bpf: Add bpf_skb_in_cgroup_proto")
4ed8ec521e ("cgroup: bpf: Add BPF_MAP_TYPE_CGROUP_ARRAY")
Definetely needs to have example programs accessing task_struct from a bpf proggie
started from 'perf trace':
606274c5ab ("bpf: introduce bpf_get_current_task() helper")
Core networking related, XDP:
6ce96ca348 ("bpf: add XDP_TX xdp_action for direct forwarding")
6a773a15a1 ("bpf: add XDP prog type for early driver filter")
13c5c240f7 ("bpf: add bpf_get_hash_recalc helper")
d2485c4242 ("bpf: add bpf_skb_change_type helper")
6578171a7f ("bpf: add bpf_skb_change_proto helper")
Changes detected by the tools build system:
$ make -C tools/perf O=/tmp/build/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
Warning: tools/include/uapi/linux/bpf.h differs from kernel
INSTALL GTK UI
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
<SNIP>
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Brenden Blanco <bblanco@plumgrid.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-difq4ts1xvww6eyfs9e7zlft@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The objtool build fails with the recent changes to the bits-per-long
headers:
tools/include/linux/bitops.h:12:0: error: "BITS_PER_LONG" redefined [-Werror]
Which got introduced by:
bb9707077b tools: Copy the bitsperlong.h files from the kernel
Work it around for the time being.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We shouldn't use headers from the kernel sources directly, instead we
should use the system's headers or in cases where that isn't possible,
like with perf_event.h, where the introduction of kernel features such
as perf_event_attr.{write_backwards,sample_max_stack} and
PERF_EVENT_IOC_PAUSE_OUTPUT take some time to become available in
/usr/include/linux/perf_event.h we need a copy.
Do it and check for source code drift, emitting a warning when changes
are detected.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-v6aks5un3s5pehory6f42nrl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tools so far have been using the strerror_r() GNU variant, that
returns a string, be it the buffer passed or something else.
But that, besides being tricky in cases where we expect that the
function using strerror_r() returns the error formatted in a provided
buffer (we have to check if it returned something else and copy that
instead), breaks the build on systems not using glibc, like Alpine
Linux, where musl libc is used.
So, introduce yet another wrapper, str_error_r(), that has the GNU
interface, but uses the portable XSI variant of strerror_r(), so that
users rest asured that the provided buffer is used and it is what is
returned.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-d4t42fnf48ytlk8rjxs822tf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf fixes from Ingo Molnar:
"This tree contains various perf fixes on the kernel side, plus three
hw/event-enablement late additions:
- Intel Memory Bandwidth Monitoring events and handling
- the AMD Accumulated Power Mechanism reporting facility
- more IOMMU events
... and a final round of perf tooling updates/fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
perf llvm: Use strerror_r instead of the thread unsafe strerror one
perf llvm: Use realpath to canonicalize paths
perf tools: Unexport some methods unused outside strbuf.c
perf probe: No need to use formatting strbuf method
perf help: Use asprintf instead of adhoc equivalents
perf tools: Remove unused perf_pathdup, xstrdup functions
perf tools: Do not include stringify.h from the kernel sources
tools include: Copy linux/stringify.h from the kernel
tools lib traceevent: Remove redundant CPU output
perf tools: Remove needless 'extern' from function prototypes
perf tools: Simplify die() mechanism
perf tools: Remove unused DIE_IF macro
perf script: Remove lots of unused arguments
perf thread: Rename perf_event__preprocess_sample_addr to thread__resolve
perf machine: Rename perf_event__preprocess_sample to machine__resolve
perf tools: Add cpumode to struct perf_sample
perf tests: Forward the perf_sample in the dwarf unwind test
perf tools: Remove misplaced __maybe_unused
perf list: Fix documentation of :ppp
perf bench numa: Fix assertion for nodes bitfield
...
Vinson reported build breakage with gcc 4.4 due to strict-aliasing.
CC util/annotate.o
cc1: warnings being treated as errors
util/annotate.c: In function ‘disasm__purge’:
linux-next/tools/include/linux/compiler.h:66: error: dereferencing
pointer ‘res.41’ does break strict-aliasing rules
The reason is READ_ONCE/WRITE_ONCE code we took from kernel sources. They
intentionaly break aliasing rules. While this is ok for kernel because it's
built with -fno-strict-aliasing, it breaks perf which is build with
-Wstrict-aliasing=3.
Using extra __may_alias__ type to allow aliasing in this case.
Reported-and-tested-by: Vinson Lee <vlee@twopensource.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Martin Liska <mliska@suse.cz>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rabin Vincent <rabin@rab.in>
Cc: linux-next@vger.kernel.org
Link: http://lkml.kernel.org/r/20151013085214.GB2705@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The error variable breaks build on CentOS 6.7, due to collision with
global error symbol:
CC util/evlist.o
cc1: warnings being treated as errors
In file included from util/evlist.c:28:
tools/include/linux/err.h: In function ‘ERR_PTR’:
tools/include/linux/err.h:34: error: declaration of ‘error’ shadows a global declaration
util/util.h:135: error: shadowed declaration is here
Using 'error_' name instead to fix it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/n/tip-i9mdgdbrgauy3fe76s9rd125@git.kernel.org
Reported-by: Vinson Lee <vlee@twopensource.com>
[ Use 'error_' instead of 'err' to, visually, not diverge too much from include/linux/err.h ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
