Files
Petri Gynther c7cb7ae16c Merge android-4.9 (4.9.159) into android-msm-bluecross-4.9-lts
Merge 4.9.159 into android-4.9
Linux 4.9.159
    Revert "scsi: aic94xx: fix module loading"
  * uapi/if_ether.h: move __UAPI_DEF_ETHHDR libc define
      include/uapi/linux/if_ether.h
      include/uapi/linux/libc-compat.h
  * mm: stop leaking PageTables
      mm/memory.c
  * pinctrl: msm: fix gpio-hog related boot issues
      drivers/pinctrl/qcom/pinctrl-msm.c
    netfilter: nf_tables: fix mismatch in big-endian system
    usb: dwc2: Remove unnecessary kfree
    kaweth: use skb_cow_head() to deal with cloned skbs
    ch9200: use skb_cow_head() to deal with cloned skbs
    smsc95xx: Use skb_cow_head to deal with cloned skbs
    drm/i915: Prevent a race during I915_GEM_MMAP ioctl with WC set
    dm thin: fix bug where bio that overwrites thin block ignores FUA
    x86/a.out: Clear the dump structure initially
  * signal: Restore the stop PTRACE_EVENT_EXIT
      kernel/signal.c
    x86/platform/UV: Use efi_runtime_lock to serialise BIOS calls
    tracing/uprobes: Fix output for multiple string arguments
    alpha: Fix Eiger NR_IRQS to 128
    alpha: fix page fault handling for r16-r18 targets
    Input: elantech - enable 3rd button support on Fujitsu CELSIUS H780
    Input: bma150 - register input device after setting private data
    kvm: vmx: Fix entry number check for add_atomic_switch_msr()
  * ALSA: usb-audio: Fix implicit fb endpoint setup by quirk
      sound/usb/pcm.c
    ALSA: hda - Add quirk for HP EliteBook 840 G5
  * perf/x86: Add check_period PMU callback
      include/linux/perf_event.h
      kernel/events/core.c
  * perf/core: Fix impossible ring-buffer sizes warning
      kernel/events/ring_buffer.c
    Input: elan_i2c - add ACPI ID for touchpad in Lenovo V330-15ISK
    Revert "Input: elan_i2c - add ACPI ID for touchpad in ASUS Aspire F5-573G"
    perf report: Include partial stacks unwound with libdw
    cifs: Limit memory used by lock request calls to a page
    gpio: pl061: handle failed allocations
    ARM: dts: kirkwood: Fix polarity of GPIO fan lines
    ARM: dts: da850-lcdk: Correct the sound card name
    ARM: dts: da850-evm: Correct the sound card name
    drm/bridge: tc358767: fix output H/V syncs
    drm/bridge: tc358767: reject modes which require too much BW
    drm/bridge: tc358767: fix initial DP0/1_SRCCTRL value
    drm/bridge: tc358767: fix single lane configuration
    drm/bridge: tc358767: add defines for DP1_SRCCTRL & PHY_2LANE
  * cpufreq: check if policy is inactive early in __cpufreq_get()
      drivers/cpufreq/cpufreq.c
    ACPI: NUMA: Use correct type for printing addresses on i386-PAE
    bnx2x: disable GSO where gso_size is too big for hardware
  * net: create skb_gso_validate_mac_len()
      include/linux/skbuff.h
      net/core/skbuff.c
    ARM: fix the cockup in the previous patch
    ARM: ensure that processor vtables is not lost after boot
    ARM: spectre-v2: per-CPU vtables to work around big.Little systems
    ARM: add PROC_VTABLE and PROC_TABLE macros
    ARM: clean up per-processor check_bugs method call
    ARM: split out processor lookup
    ARM: make lookup_processor_type() non-__init
    ARM: 8810/1: vfp: Fix wrong assignement to ufp_exc
    ARM: 8797/1: spectre-v1.1: harden __copy_to_user
    ARM: 8796/1: spectre-v1,v1.1: provide helpers for address sanitization
    ARM: 8795/1: spectre-v1.1: use put_user() for __put_user()
    ARM: 8794/1: uaccess: Prevent speculative use of the current addr_limit
    ARM: 8793/1: signal: replace __put_user_error with __put_user
    ARM: 8792/1: oabi-compat: copy oabi events using __copy_to_user()
    ARM: 8791/1: vfp: use __copy_to_user() when saving VFP state
    ARM: 8789/1: signal: copy registers using __copy_to_user()
  * uapi/if_ether.h: prevent redefinition of struct ethhdr
      include/uapi/linux/if_ether.h
      include/uapi/linux/libc-compat.h
  * eeprom: at24: add support for 24c2048
      drivers/misc/eeprom/Kconfig
    dt-bindings: eeprom: at24: add "atmel,24c2048" compatible string
    BACKPORT: userfaultfd: shmem/hugetlbfs: only allow to register VM_MAYWRITE vmas
    ANDROID: cuttlefish_defconfig: Enable DEBUG_SET_MODULE_RONX
Merge 4.9.158 into android-4.9
Linux 4.9.158
  * Revert "exec: load_script: don't blindly truncate shebang string"
      fs/binfmt_script.c
Merge 4.9.157 into android-4.9
Linux 4.9.157
    batman-adv: Force mac header to start of data on xmit
    batman-adv: Avoid WARN on net_device without parent in netns
  * xfrm: refine validation of template and selector families
      net/xfrm/xfrm_user.c
    libceph: avoid KEEPALIVE_PENDING races in ceph_con_keepalive()
  * Revert "cifs: In Kconfig CONFIG_CIFS_POSIX needs depends on legacy (insecure cifs)"
      fs/cifs/Kconfig
  * HID: debug: fix the ring buffer implementation
      drivers/hid/hid-debug.c
      include/linux/hid-debug.h
    nfsd4: catch some false session retries
    nfsd4: fix cached replies to solo SEQUENCE compounds
    drm/vmwgfx: Return error code from vmw_execbuf_copy_fence_user
    drm/vmwgfx: Fix setting of dma masks
  * drm/modes: Prevent division by zero htotal
      drivers/gpu/drm/drm_modes.c
    mac80211: ensure that mgmt tx skbs have tailroom for encryption
    ARM: tango: Improve ARCH_MULTIPLATFORM compatibility
    ARM: iop32x/n2100: fix PCI IRQ mapping
    MIPS: VDSO: Include $(ccflags-vdso) in o32,n32 .lds builds
    MIPS: OCTEON: don't set octeon_dma_bar_type if PCI is disabled
    mips: cm: reprime error cause
  * debugfs: fix debugfs_rename parameter checking
      fs/debugfs/inode.c
    samples: mei: use /dev/mei0 instead of /dev/mei
    misc: vexpress: Off by one in vexpress_syscfg_exec()
  * signal: Better detection of synchronous signals
      kernel/signal.c
  * signal: Always notice exiting tasks
      kernel/signal.c
    iio: chemical: atlas-ph-sensor: correct IIO_TEMP values to millicelsius
    mtd: rawnand: gpmi: fix MX28 bus master lockup problem
    ANDROID: cuttlefish: enable CONFIG_NET_SCH_NETEM=y
    Add XFRM-I to cuttlefish defconfigs
    ANDROID: Move from clang r346389b to r349610.

Change-Id: I000fc05db9aa733cfa7027025d690d5e0fd0e683
Signed-off-by: Petri Gynther <pgynther@google.com>
2019-02-22 15:16:01 -08:00

159 lines
7.4 KiB
C

/*
* INET An implementation of the TCP/IP protocol suite for the LINUX
* operating system. INET is implemented using the BSD Socket
* interface as the means of communication with the user level.
*
* Global definitions for the Ethernet IEEE 802.3 interface.
*
* Version: @(#)if_ether.h 1.0.1a 02/08/94
*
* Author: Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
* Donald Becker, <becker@super.org>
* Alan Cox, <alan@lxorguk.ukuu.org.uk>
* Steve Whitehouse, <gw7rrm@eeshack3.swan.ac.uk>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifndef _UAPI_LINUX_IF_ETHER_H
#define _UAPI_LINUX_IF_ETHER_H
#include <linux/types.h>
/*
* IEEE 802.3 Ethernet magic constants. The frame sizes omit the preamble
* and FCS/CRC (frame check sequence).
*/
#define ETH_ALEN 6 /* Octets in one ethernet addr */
#define ETH_TLEN 2 /* Octets in ethernet type field */
#define ETH_HLEN 14 /* Total octets in header. */
#define ETH_ZLEN 60 /* Min. octets in frame sans FCS */
#define ETH_DATA_LEN 1500 /* Max. octets in payload */
#define ETH_FRAME_LEN 1514 /* Max. octets in frame sans FCS */
#define ETH_FCS_LEN 4 /* Octets in the FCS */
/*
* These are the defined Ethernet Protocol ID's.
*/
#define ETH_P_LOOP 0x0060 /* Ethernet Loopback packet */
#define ETH_P_PUP 0x0200 /* Xerox PUP packet */
#define ETH_P_PUPAT 0x0201 /* Xerox PUP Addr Trans packet */
#define ETH_P_TSN 0x22F0 /* TSN (IEEE 1722) packet */
#define ETH_P_IP 0x0800 /* Internet Protocol packet */
#define ETH_P_X25 0x0805 /* CCITT X.25 */
#define ETH_P_ARP 0x0806 /* Address Resolution packet */
#define ETH_P_BPQ 0x08FF /* G8BPQ AX.25 Ethernet Packet [ NOT AN OFFICIALLY REGISTERED ID ] */
#define ETH_P_IEEEPUP 0x0a00 /* Xerox IEEE802.3 PUP packet */
#define ETH_P_IEEEPUPAT 0x0a01 /* Xerox IEEE802.3 PUP Addr Trans packet */
#define ETH_P_BATMAN 0x4305 /* B.A.T.M.A.N.-Advanced packet [ NOT AN OFFICIALLY REGISTERED ID ] */
#define ETH_P_DEC 0x6000 /* DEC Assigned proto */
#define ETH_P_DNA_DL 0x6001 /* DEC DNA Dump/Load */
#define ETH_P_DNA_RC 0x6002 /* DEC DNA Remote Console */
#define ETH_P_DNA_RT 0x6003 /* DEC DNA Routing */
#define ETH_P_LAT 0x6004 /* DEC LAT */
#define ETH_P_DIAG 0x6005 /* DEC Diagnostics */
#define ETH_P_CUST 0x6006 /* DEC Customer use */
#define ETH_P_SCA 0x6007 /* DEC Systems Comms Arch */
#define ETH_P_TEB 0x6558 /* Trans Ether Bridging */
#define ETH_P_RARP 0x8035 /* Reverse Addr Res packet */
#define ETH_P_ATALK 0x809B /* Appletalk DDP */
#define ETH_P_AARP 0x80F3 /* Appletalk AARP */
#define ETH_P_8021Q 0x8100 /* 802.1Q VLAN Extended Header */
#define ETH_P_IPX 0x8137 /* IPX over DIX */
#define ETH_P_IPV6 0x86DD /* IPv6 over bluebook */
#define ETH_P_PAUSE 0x8808 /* IEEE Pause frames. See 802.3 31B */
#define ETH_P_SLOW 0x8809 /* Slow Protocol. See 802.3ad 43B */
#define ETH_P_WCCP 0x883E /* Web-cache coordination protocol
* defined in draft-wilson-wrec-wccp-v2-00.txt */
#define ETH_P_MPLS_UC 0x8847 /* MPLS Unicast traffic */
#define ETH_P_MPLS_MC 0x8848 /* MPLS Multicast traffic */
#define ETH_P_ATMMPOA 0x884c /* MultiProtocol Over ATM */
#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */
#define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */
#define ETH_P_LINK_CTL 0x886c /* HPNA, wlan link local tunnel */
#define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport
* over Ethernet
*/
#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
#define ETH_P_AOE 0x88A2 /* ATA over Ethernet */
#define ETH_P_8021AD 0x88A8 /* 802.1ad Service VLAN */
#define ETH_P_802_EX1 0x88B5 /* 802.1 Local Experimental 1. */
#define ETH_P_TIPC 0x88CA /* TIPC */
#define ETH_P_MACSEC 0x88E5 /* 802.1ae MACsec */
#define ETH_P_8021AH 0x88E7 /* 802.1ah Backbone Service Tag */
#define ETH_P_MVRP 0x88F5 /* 802.1Q MVRP */
#define ETH_P_1588 0x88F7 /* IEEE 1588 Timesync */
#define ETH_P_NCSI 0x88F8 /* NCSI protocol */
#define ETH_P_PRP 0x88FB /* IEC 62439-3 PRP/HSRv0 */
#define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */
#define ETH_P_TDLS 0x890D /* TDLS */
#define ETH_P_FIP 0x8914 /* FCoE Initialization Protocol */
#define ETH_P_80221 0x8917 /* IEEE 802.21 Media Independent Handover Protocol */
#define ETH_P_HSR 0x892F /* IEC 62439-3 HSRv1 */
#define ETH_P_LOOPBACK 0x9000 /* Ethernet loopback packet, per IEEE 802.3 */
#define ETH_P_QINQ1 0x9100 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
#define ETH_P_QINQ2 0x9200 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
#define ETH_P_QINQ3 0x9300 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
#define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
#define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */
#define ETH_P_802_3_MIN 0x0600 /* If the value in the ethernet type is less than this value
* then the frame is Ethernet II. Else it is 802.3 */
#define ETH_P_MAP 0xDA1A /* Multiplexing and Aggregation Protocol
* NOT AN OFFICIALLY REGISTERED ID ]
*/
/*
* Non DIX types. Won't clash for 1500 types.
*/
#define ETH_P_802_3 0x0001 /* Dummy type for 802.3 frames */
#define ETH_P_AX25 0x0002 /* Dummy protocol id for AX.25 */
#define ETH_P_ALL 0x0003 /* Every packet (be careful!!!) */
#define ETH_P_802_2 0x0004 /* 802.2 frames */
#define ETH_P_SNAP 0x0005 /* Internal only */
#define ETH_P_DDCMP 0x0006 /* DEC DDCMP: Internal only */
#define ETH_P_WAN_PPP 0x0007 /* Dummy type for WAN PPP frames*/
#define ETH_P_PPP_MP 0x0008 /* Dummy type for PPP MP frames */
#define ETH_P_LOCALTALK 0x0009 /* Localtalk pseudo type */
#define ETH_P_CAN 0x000C /* CAN: Controller Area Network */
#define ETH_P_CANFD 0x000D /* CANFD: CAN flexible data rate*/
#define ETH_P_PPPTALK 0x0010 /* Dummy type for Atalk over PPP*/
#define ETH_P_TR_802_2 0x0011 /* 802.2 frames */
#define ETH_P_MOBITEX 0x0015 /* Mobitex (kaz@cafe.net) */
#define ETH_P_CONTROL 0x0016 /* Card specific control frames */
#define ETH_P_IRDA 0x0017 /* Linux-IrDA */
#define ETH_P_ECONET 0x0018 /* Acorn Econet */
#define ETH_P_HDLC 0x0019 /* HDLC frames */
#define ETH_P_ARCNET 0x001A /* 1A for ArcNet :-) */
#define ETH_P_DSA 0x001B /* Distributed Switch Arch. */
#define ETH_P_TRAILER 0x001C /* Trailer switch tagging */
#define ETH_P_PHONET 0x00F5 /* Nokia Phonet frames */
#define ETH_P_IEEE802154 0x00F6 /* IEEE802.15.4 frame */
#define ETH_P_CAIF 0x00F7 /* ST-Ericsson CAIF protocol */
#define ETH_P_XDSA 0x00F8 /* Multiplexed DSA protocol */
/*
* This is an Ethernet frame header.
*/
/* allow libcs like musl to deactivate this, glibc does not implement this. */
#ifndef __UAPI_DEF_ETHHDR
#define __UAPI_DEF_ETHHDR 1
#endif
#if __UAPI_DEF_ETHHDR
struct ethhdr {
unsigned char h_dest[ETH_ALEN]; /* destination eth addr */
unsigned char h_source[ETH_ALEN]; /* source ether addr */
__be16 h_proto; /* packet type ID field */
} __attribute__((packed));
#endif
#endif /* _UAPI_LINUX_IF_ETHER_H */