* refs/heads/tmp-b324a70:
Linux 4.9.86
MIPS: Implement __multi3 for GCC7 MIPS64r6 builds
KVM: arm/arm64: Fix check for hugepage size when allocating at Stage 2
net: gianfar_ptp: move set_fipers() to spinlock protecting area
sctp: make use of pre-calculated len
xen/gntdev: Fix partial gntdev_mmap() cleanup
xen/gntdev: Fix off-by-one error when unmapping with holes
SolutionEngine771x: fix Ether platform data
mdio-sun4i: Fix a memory leak
xen-netfront: enable device after manual module load
bnxt_en: Fix the 'Invalid VF' id check in bnxt_vf_ndo_prep routine.
can: flex_can: Correct the checking for frame length in flexcan_start_xmit()
mac80211: mesh: drop frames appearing to be from us
nl80211: Check for the required netlink attribute presence
i40e/i40evf: Account for frags split over multiple descriptors in check linearize
uapi libc compat: add fallback for unsupported libcs
drm/ttm: check the return value of kzalloc
NET: usb: qmi_wwan: add support for YUGA CLM920-NC5 PID 0x9625
e1000: fix disabling already-disabled warning
macvlan: Fix one possible double free
xfs: quota: check result of register_shrinker()
xfs: quota: fix missed destroy of qi_tree_lock
IB/ipoib: Fix race condition in neigh creation
IB/mlx4: Fix mlx4_ib_alloc_mr error flow
s390/dasd: fix wrongly assigned configuration data
genirq: Guard handle_bad_irq log messages
IB/mlx5: Fix mlx5_ib_alloc_mr error flow
led: core: Fix brightness setting when setting delay_off=0
bnx2x: Improve reliability in case of nested PCI errors
tg3: Enable PHY reset in MTU change path for 5720
tg3: Add workaround to restrict 5762 MRRS to 2048
tipc: fix tipc_mon_delete() oops in tipc_enable_bearer() error path
tipc: error path leak fixes in tipc_enable_bearer()
lib/mpi: Fix umul_ppmm() for MIPS64r6
ARM: dts: ls1021a: fix incorrect clock references
scsi: storvsc: Fix scsi_cmd error assignments in storvsc_handle_error
net: stmmac: Fix TX timestamp calculation
ip6_tunnel: get the min mtu properly in ip6_tnl_xmit
net: arc_emac: fix arc_emac_rx() error paths
net: mediatek: setup proper state for disabled GMAC on the default
ASoC: nau8825: fix issue that pop noise when start capture
spi: atmel: fixed spin_lock usage inside atmel_spi_remove
mac80211_hwsim: Fix a possible sleep-in-atomic bug in hwsim_get_radio_nl
drm/nouveau/pci: do a msi rearm on init
net: phy: xgene: disable clk on error paths
sget(): handle failures of register_shrinker()
x86/asm: Allow again using asm.h when building for the 'bpf' clang target
ARM: 8731/1: Fix csum_partial_copy_from_user() stack mismatch
ipv6: icmp6: Allow icmp messages to be looped back
mtd: nand: brcmnand: Zero bitflip is not an error
mtd: nand: gpmi: Fix failure when a erased page has a bitflip at BBM
net: usb: qmi_wwan: add Telit ME910 PID 0x1101 support
nvme: check hw sectors before setting chunk sectors
dmaengine: fsl-edma: disable clks on all error paths
f2fs: fix a bug caused by NULL extent tree
i2c: designware: must wait for enable
hrtimer: Ensure POSIX compliance (relative CLOCK_REALTIME hrtimers)
ANDROID: kbuild: change LTO into a choice
ANDROID: arm64: crypto: fix AES CE when built as a module
ANDROID: staging: lustre: fix filler function type
ANDROID: fs: logfs: fix filler function type
ANDROID: fs: gfs2: fix filler function type
ANDROID: fs: exofs: fix filler function type
ANDROID: fs: afs: fix filler function type
ANDROID: keychord: Check for write data size
media-device: fix ioctl function types
drivers/perf: arm_pmu: fix function type mismatch
dummycon: fix function types
fs: nfs: fix filler function type
mm: fix filler function type mismatch
mm: fix drain_local_pages function type
BACKPORT: vfs: pass type instead of fn to do_{loop,iter}_readv_writev()
arch/arm64/crypto: fix CFI in AES CE
arch/arm64/crypto: fix CFI in SHA CE
arm64: disable CFI for cpu_replace_ttbr1
v4l2-ioctl: fix function types for IOCTL_INFO_STD
UPSTREAM: module: Do not paper over type mismatches in module_param_call()
BACKPORT: treewide: Fix function prototypes for module_param_call()
UPSTREAM: module: Prepare to convert all module_param_call() prototypes
bpf: fix function type for __bpf_prog_run
kallsyms: strip the .cfi postfix from symbols with CONFIG_CFI_CLANG
add support for clang Control Flow Integrity (CFI)
HACK: init: ensure initcall ordering with LTO
xen/efi: don't use -fshort-wchar
drivers/misc: disable LTO for lkdtm_rodata.o
arm64: vdso: disable LTO
FROMLIST: BACKPORT: arm64: select ARCH_SUPPORTS_LTO_CLANG
FROMLIST: BACKPORT: arm64: disable RANDOMIZE_MODULE_REGION_FULL with LTO_CLANG
FROMLIST: arch/arm64/crypto: disable LTO for aes-ce-cipher.c
arm64: disable ARM64_ERRATUM_843419 for clang LTO
arm64: pass code model to LLVMgold
FROMLIST: BACKPORT: arm64: make mrs_s and msr_s macros work with LTO
FROMLIST: arm64: kvm: use -fno-jump-tables with clang
FROMLIST: efi/libstub: disable LTO
FROMLIST: scripts/mod: disable LTO for empty.c
FROMLIST: BACKPORT: kbuild: fix dynamic ftrace with clang LTO
FROMLIST: BACKPORT: kbuild: add support for clang LTO
FROMLIST: BACKPORT: arm64: add a workaround for GNU gold with ARM64_MODULE_PLTS
FROMLIST: arm64: explicitly pass --no-fix-cortex-a53-843419 to GNU gold
FROMLIST: kbuild: add __ld-ifversion and linker-specific macros
FROMLIST: kbuild: add ld-name macro
FROMLIST: BACKPORT: arm64: keep .altinstructions and .altinstr_replacement
arm64: fix LD_DEAD_CODE_DATA_ELIMINATION
FROMLIST: kbuild: fix LD_DEAD_CODE_DATA_ELIMINATION
FROMLIST: BACKPORT: kbuild: add __cc-ifversion and compiler-specific variants
FROMLIST: kbuild: add clang-version.sh
Revert "binder: add missing binder_unlock()"
Linux 4.9.85
x86/entry/64: Clear extra registers beyond syscall arguments, to reduce speculation attack surface
mm: fail get_vaddr_frames() for filesystem-dax mappings
mm: Fix devm_memremap_pages() collision handling
libnvdimm, dax: fix 1GB-aligned namespaces vs physical misalignment
IB/core: disable memory registration of filesystem-dax vmas
v4l2: disable filesystem-dax mapping support
mm: introduce get_user_pages_longterm
device-dax: implement ->split() to catch invalid munmap attempts
libnvdimm: fix integer overflow static analysis warning
fs/dax.c: fix inefficiency in dax_writeback_mapping_range()
mm: avoid spurious 'bad pmd' warning messages
X.509: fix NULL dereference when restricting key with unsupported_sig
binder: add missing binder_unlock()
drm/amdgpu: add new device to use atpx quirk
drm/amdgpu: Avoid leaking PM domain on driver unbind (v2)
drm/amdgpu: add atpx quirk handling (v2)
drm/amdgpu: Add dpm quirk for Jet PRO (v2)
usb: renesas_usbhs: missed the "running" flag in usb_dmac with rx path
usb: gadget: f_fs: Process all descriptors during bind
Revert "usb: musb: host: don't start next rx urb if current one failed"
usb: ldusb: add PIDs for new CASSY devices supported by this driver
usb: dwc3: gadget: Set maxpacket size for ep0 IN
drm/edid: Add 6 bpc quirk for CPT panel in Asus UX303LA
Add delay-init quirk for Corsair K70 RGB keyboards
arm64: Disable unhandled signal log messages by default
usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks()
ohci-hcd: Fix race condition caused by ohci_urb_enqueue() and io_watchdog_func()
PCI/cxgb4: Extend T3 PCI quirk to T4+ devices
irqchip/gic-v3: Use wmb() instead of smb_wmb() in gic_raise_softirq()
x86/oprofile: Fix bogus GCC-8 warning in nmi_setup()
iio: adis_lib: Initialize trigger before requesting interrupt
iio: buffer: check if a buffer has been set up when poll is called
RDMA/uverbs: Protect from command mask overflow
PKCS#7: fix certificate chain verification
X.509: fix BUG_ON() when hash algorithm is unsupported
cfg80211: fix cfg80211_beacon_dup
scsi: ibmvfc: fix misdefined reserved field in ibmvfc_fcp_rsp_info
xtensa: fix high memory/reserved memory collision
netfilter: drop outermost socket lock in getsockopt()
ANDROID: sdcardfs: Set num in extension_details during make_item
Conflicts:
Makefile
arch/arm64/include/asm/arch_gicv3.h
arch/arm64/kernel/module.lds
drivers/usb/gadget/function/f_fs.c
scripts/link-vmlinux.sh
Change in module_param_call() definition requires alignment in:
drivers/hwtracing/coresight/coresight-event.c
drivers/media/radio/radio-iris-transport.c
drivers/power/reset/msm-poweroff.c
drivers/soc/qcom/wcnss/wcnss_wlan.c
drivers/video/fbdev/msm/mdss_dsi_status.c
Change-Id: I2fa32c39bd4ba8a132f8f8abc8132a2ceb32907a
Signed-off-by: Blagovest Kolenichev <bkolenichev@codeaurora.org>
* refs/heads/tmp-a9d0273:
Linux 4.9.84
crypto: s5p-sss - Fix kernel Oops in AES-ECB mode
KVM: nVMX: invvpid handling improvements
KVM: VMX: clean up declaration of VPID/EPT invalidation types
KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously
x86/microcode/AMD: Change load_microcode_amd()'s param to bool to fix preemptibility bug
usb: phy: msm add regulator dependency
arm64: fix warning about swapper_pg_dir overflow
idle: i7300: add PCI dependency
spi: bcm-qspi: shut up warning about cfi header inclusion
binfmt_elf: compat: avoid unused function warning
arm64: sunxi: always enable reset controller
drm/i915: hide unused intel_panel_set_backlight function
kasan: rework Kconfig settings
clk: meson: gxbb: fix build error without RESET_CONTROLLER
ISDN: eicon: reduce stack size of sig_ind function
tw5864: use dev_warn instead of WARN to shut up warning
em28xx: only use mt9v011 if camera support is enabled
go7007: add MEDIA_CAMERA_SUPPORT dependency
tc358743: fix register i2c_rd/wr functions
shmem: fix compilation warnings on unused functions
KVM: add X86_LOCAL_APIC dependency
Input: tca8418_keypad - hide gcc-4.9 -Wmaybe-uninitialized warning
drm/nouveau: hide gcc-4.9 -Wmaybe-uninitialized
rbd: silence bogus -Wmaybe-uninitialized warning
drm: exynos: mark pm functions as __maybe_unused
security/keys: BIG_KEY requires CONFIG_CRYPTO
cw1200: fix bogus maybe-uninitialized warning
reiserfs: avoid a -Wmaybe-uninitialized warning
ALSA: hda/ca0132 - fix possible NULL pointer use
arm64: Kconfig: select COMPAT_BINFMT_ELF only when BINFMT_ELF is set
scsi: advansys: fix uninitialized data access
x86/vm86: Fix unused variable warning if THP is disabled
x86/platform: Add PCI dependency for PUNIT_ATOM_DEBUG
dmaengine: zx: fix build warning
x86: add MULTIUSER dependency for KVM
thermal: fix INTEL_SOC_DTS_IOSF_CORE dependencies
x86/build: Silence the build with "make -s"
tools build: Add tools tree support for 'make -s'
x86/fpu/math-emu: Fix possible uninitialized variable use
arm64: define BUG() instruction without CONFIG_BUG
gpio: xgene: mark PM functions as __maybe_unused
x86/ras/inject: Make it depend on X86_LOCAL_APIC=y
scsi: advansys: fix build warning for PCI=n
video: fbdev: via: remove possibly unused variables
perf: xgene: Include module.h
PCI: Change pci_host_common_probe() visibility
usb: musb: fix compilation warning on unused function
platform/x86: intel_mid_thermal: Fix suspend handlers unused warning
gpio: intel-mid: Fix build warning when !CONFIG_PM
PCI: vmd: Fix suspend handlers defined-but-not-used warning
perf/x86: Shut up false-positive -Wmaybe-uninitialized warning
vmxnet3: prevent building with 64K pages
clk: sunxi-ng: fix build error without CONFIG_RESET_CONTROLLER
shmem: avoid maybe-uninitialized warning
drm/i915: fix intel_backlight_device_register declaration
crypto: talitos - fix Kernel Oops on hashing an empty file
powerpc/64s: Improve RFI L1-D cache flush fallback
powerpc/64s: Simple RFI macro conversions
powerpc/64s: Fix conversion of slb_miss_common to use RFI_TO_USER/KERNEL
hippi: Fix a Fix a possible sleep-in-atomic bug in rr_close
xen: XEN_ACPI_PROCESSOR is Dom0-only
platform/x86: dell-laptop: Fix keyboard max lighting for Dell Latitude E6410
x86/mm/kmmio: Fix mmiotrace for page unaligned addresses
mm/early_ioremap: Fix boot hang with earlyprintk=efi,keep
usb: dwc3: of-simple: fix missing clk_disable_unprepare
usb: dwc3: gadget: Wait longer for controller to end command processing
dmaengine: jz4740: disable/unprepare clk if probe fails
drm/armada: fix leak of crtc structure
xfrm: Fix stack-out-of-bounds with misconfigured transport mode policies.
spi: sun4i: disable clocks in the remove function
ASoC: rockchip: disable clock on error
clk: fix a panic error caused by accessing NULL pointer
dmaengine: at_hdmac: fix potential NULL pointer dereference in atc_prep_dma_interleaved
dmaengine: ioat: Fix error handling path
gianfar: Disable EEE autoneg by default
509: fix printing uninitialized stack memory when OID is empty
net: ethernet: arc: fix error handling in emac_rockchip_probe
brcmfmac: Avoid build error with make W=1
btrfs: Fix possible off-by-one in btrfs_search_path_in_tree
net_sched: red: Avoid illegal values
net_sched: red: Avoid devision by zero
gianfar: fix a flooded alignment reports because of padding issue.
ARM: dts: Fix elm interrupt compiler warning
s390/dasd: prevent prefix I/O error
powerpc/perf: Fix oops when grouping different pmu events
m68k: add missing SOFTIRQENTRY_TEXT linker section
ipvlan: Add the skb->mark as flow4's member to lookup route
scripts/kernel-doc: Don't fail with status != 0 if error encountered with -none
sctp: only update outstanding_bytes for transmitted queue when doing prsctp_prune
RDMA/cma: Make sure that PSN is not over max allowed
i40iw: Correct ARP index mask
pinctrl: sunxi: Fix A64 UART mux value
pinctrl: sunxi: Fix A80 interrupt pin bank
media: s5k6aa: describe some function parameters
perf bench numa: Fixup discontiguous/sparse numa nodes
perf top: Fix window dimensions change handling
ARM: dts: am437x-cm-t43: Correct the dmas property of spi0
ARM: dts: am4372: Correct the interrupts_properties of McASP
ARM: dts: logicpd-somlv: Fix wl127x pinmux
ARM: dts: logicpd-som-lv: Fix gpmc addresses for NAND and enet
ARM: dts: Fix omap4 hang with GPS connected to USB by using wakeupgen
ARM: AM33xx: PRM: Remove am33xx_pwrdm_read_prev_pwrst function
ARM: OMAP2+: Fix SRAM virt to phys translation for save_secure_ram_context
usb: build drivers/usb/common/ when USB_SUPPORT is set
usbip: keep usbip_device sockfd state in sync with tcp_socket
staging: iio: ad5933: switch buffer mode to software
staging: iio: adc: ad7192: fix external frequency setting
binder: check for binder_thread allocation failure in binder_poll()
staging: android: ashmem: Fix a race condition in pin ioctls
dn_getsockoptdecnet: move nf_{get/set}sockopt outside sock lock
arm64: dts: add #cooling-cells to CPU nodes
ARM: 8743/1: bL_switcher: add MODULE_LICENSE tag
video: fbdev/mmp: add MODULE_LICENSE
ASoC: ux500: add MODULE_LICENSE tag
crypto: hash - prevent using keyed hashes without setting key
crypto: hash - annotate algorithms taking optional key
net: avoid skb_warn_bad_offload on IS_ERR
rds: tcp: atomically purge entries from rds_tcp_conn_list during netns delete
netfilter: xt_RATEEST: acquire xt_rateest_mutex for hash insert
netfilter: xt_cgroup: initialize info->priv in cgroup_mt_check_v1()
netfilter: on sockopt() acquire sock lock only in the required scope
netfilter: ipt_CLUSTERIP: fix out-of-bounds accesses in clusterip_tg_check()
netfilter: x_tables: avoid out-of-bounds reads in xt_request_find_{match|target}
netfilter: x_tables: fix int overflow in xt_alloc_table_info()
kcov: detect double association with a single task
KVM: x86: fix escape of guest dr6 to the host
blk_rq_map_user_iov: fix error override
staging: android: ion: Switch from WARN to pr_warn
staging: android: ion: Add __GFP_NOWARN for system contig heap
crypto: x86/twofish-3way - Fix %rbp usage
selinux: skip bounded transition processing if the policy isn't loaded
selinux: ensure the context is NUL terminated in security_context_to_sid_core()
Provide a function to create a NUL-terminated string from unterminated data
ptr_ring: fail early if queue occupies more than KMALLOC_MAX_SIZE
drm: Require __GFP_NOFAIL for the legacy drm_modeset_lock_all
blktrace: fix unlocked registration of tracepoints
sctp: set frag_point in sctp_setsockopt_maxseg correctly
xfrm: check id proto in validate_tmpl()
xfrm: Fix stack-out-of-bounds read on socket policy lookup.
mm,vmscan: Make unregister_shrinker() no-op if register_shrinker() failed.
xfrm: skip policies marked as dead while rehashing
cfg80211: check dev_set_name() return value
kcm: Only allow TCP sockets to be attached to a KCM mux
kcm: Check if sk_user_data already set in kcm_attach
vhost: use mutex_lock_nested() in vhost_dev_lock_vqs()
ANDROID: sdcardfs: Hold i_mutex for i_size_write
UPSTREAM: ANDROID: binder: synchronize_rcu() when using POLLFREE.
BACKPORT, FROMGIT: crypto: speck - add test vectors for Speck64-XTS
BACKPORT, FROMGIT: crypto: speck - add test vectors for Speck128-XTS
BACKPORT, FROMGIT: crypto: arm/speck - add NEON-accelerated implementation of Speck-XTS
FROMGIT: crypto: speck - export common helpers
BACKPORT, FROMGIT: crypto: speck - add support for the Speck block cipher
f2fs: updates on v4.16-rc1
Linux 4.9.83
media: r820t: fix r820t_write_reg for KASAN
ARM: dts: Delete bogus reference to the charlcd
arm: dts: mt2701: Add reset-cells
ARM: dts: s5pv210: add interrupt-parent for ohci
arm64: dts: msm8916: Add missing #phy-cells
ARM: pxa/tosa-bt: add MODULE_LICENSE tag
ARM: dts: exynos: fix RTC interrupt for exynos5410
vfs: don't do RCU lookup of empty pathnames
x86: fix build warnign with 32-bit PAE
x86/cpu: Change type of x86_cache_size variable to unsigned int
x86/spectre: Fix an error message
x86/cpu: Rename cpu_data.x86_mask to cpu_data.x86_stepping
selftests/x86/mpx: Fix incorrect bounds with old _sigfault
x86/speculation: Add <asm/msr-index.h> dependency
nospec: Move array_index_nospec() parameter checking into separate macro
x86/speculation: Fix up array_index_nospec_mask() asm constraint
selftests/x86: Do not rely on "int $0x80" in single_step_syscall.c
selftests/x86: Do not rely on "int $0x80" in test_mremap_vdso.c
selftests/x86/pkeys: Remove unused functions
x86/speculation: Clean up various Spectre related details
X86/nVMX: Properly set spec_ctrl and pred_cmd before merging MSRs
KVM/x86: Reduce retpoline performance impact in slot_handle_level_range(), by always inlining iterator helper methods
x86/speculation: Correct Speculation Control microcode blacklist again
x86/speculation: Update Speculation Control microcode blacklist
compiler-gcc.h: Introduce __optimize function attribute
x86/entry/64/compat: Clear registers for compat syscalls, to reduce speculation attack surface
arm: spear13xx: Fix spics gpio controller's warning
arm: spear13xx: Fix dmas cells
arm: spear600: Add missing interrupt-parent of rtc
ARM: dts: nomadik: add interrupt-parent for clcd
ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property
ARM: lpc3250: fix uda1380 gpio numbers
arm64: dts: msm8916: Correct ipc references for smsm
s390: fix handling of -1 in set{,fs}[gu]id16 syscalls
ocfs2: try a blocking lock before return AOP_TRUNCATED_PAGE
PM / devfreq: Propagate error from devfreq_add_device()
cpufreq: powernv: Dont assume distinct pstate values for nominal and pmin
RDMA/rxe: Fix a race condition related to the QP error state
kselftest: fix OOM in memory compaction test
IB/mlx4: Fix incorrectly releasing steerable UD QPs when have only ETH ports
IB/qib: Fix comparison error with qperf compare/swap test
powerpc: fix build errors in stable tree
dm: correctly handle chained bios in dec_pending()
usb: Move USB_UHCI_BIG_ENDIAN_* out of USB_SUPPORT
mvpp2: fix multicast address filter
ALSA: seq: Fix racy pool initializations
ALSA: usb-audio: add implicit fb quirk for Behringer UFX1204
ALSA: hda/realtek: PCI quirk for Fujitsu U7x7
ALSA: hda/realtek - Enable Thinkpad Dock device for ALC298 platform
ALSA: usb-audio: Fix UAC2 get_ctl request with a RANGE attribute
ALSA: hda - Fix headset mic detection problem for two Dell machines
mtd: nand: vf610: set correct ooblayout
9p/trans_virtio: discard zero-length reply
Btrfs: fix unexpected -EEXIST when creating new inode
Btrfs: fix btrfs_evict_inode to handle abnormal inodes correctly
Btrfs: fix extent state leak from tree log
Btrfs: fix crash due to not cleaning up tree log block's dirty bits
Btrfs: fix deadlock in run_delalloc_nocow
target/iscsi: avoid NULL dereference in CHAP auth error path
rtlwifi: rtl8821ae: Fix connection lost problem correctly
console/dummy: leave .con_font_get set to NULL
video: fbdev: atmel_lcdfb: fix display-timings lookup
PCI: keystone: Fix interrupt-controller-node lookup
MIPS: Fix typo BIG_ENDIAN to CPU_BIG_ENDIAN
mm: Fix memory size alignment in devm_memremap_pages_release()
mm: hide a #warning for COMPILE_TEST
ext4: correct documentation for grpid mount option
ext4: save error to disk in __ext4_grp_locked_error()
ext4: fix a race in the ext4 shutdown path
jbd2: fix sphinx kernel-doc build warnings
mbcache: initialize entry->e_referenced in mb_cache_entry_create()
rtc-opal: Fix handling of firmware error codes, prevent busy loops
drm/radeon: adjust tested variable
drm/radeon: Add dpm quirk for Jet PRO (v2)
scsi: smartpqi: allow static build ("built-in")
BACKPORT: tee: shm: Potential NULL dereference calling tee_shm_register()
BACKPORT: tee: shm: don't put_page on null shm->pages
BACKPORT: tee: shm: make function __tee_shm_alloc static
BACKPORT: tee: optee: check type of registered shared memory
BACKPORT: tee: add start argument to shm_register callback
BACKPORT: tee: optee: fix header dependencies
BACKPORT: tee: shm: inline tee_shm_get_id()
BACKPORT: tee: use reference counting for tee_context
BACKPORT: tee: optee: enable dynamic SHM support
BACKPORT: tee: optee: add optee-specific shared pool implementation
BACKPORT: tee: optee: store OP-TEE capabilities in private data
BACKPORT: tee: optee: add registered buffers handling into RPC calls
BACKPORT: tee: optee: add registered shared parameters handling
BACKPORT: tee: optee: add shared buffer registration functions
BACKPORT: tee: optee: add page list manipulation functions
BACKPORT: tee: optee: Update protocol definitions
BACKPORT: tee: shm: add page accessor functions
BACKPORT: tee: shm: add accessors for buffer size and page offset
BACKPORT: tee: add register user memory
BACKPORT: tee: flexible shared memory pool creation
BACKPORT: optee: support asynchronous supplicant requests
BACKPORT: tee: add TEE_IOCTL_PARAM_ATTR_META
BACKPORT: tee: add tee_param_is_memref() for driver use
UPSTREAM: tcp: fix access to sk->sk_state in tcp_poll()
BACKPORT: tcp: fix potential double free issue for fastopen_req
BACKPORT: xfrm: Fix return value check of copy_sec_ctx.
time: Fix ktime_get_raw() incorrect base accumulation
FROMLIST: coresight: ETM: Add support for ARM Cortex-A73
FROMLIST: coresight: tmc: implementing TMC-ETR AUX space API
UPSTREAM: coresight: etm_perf: Fix using uninitialised work
UPSTREAM: coresight: fix kernel panic caused by invalid CPU
UPSTREAM: coresight: Fix disabling of CoreSight TPIU
UPSTREAM: coresight: perf: Add a missing call to etm_free_aux
UPSTREAM: coresight: tmc: Remove duplicate memset
UPSTREAM: coresight: tmc: Get rid of mode parameter for helper routines
UPSTREAM: coresight: tmc: Cleanup operation mode handling
UPSTREAM: coresight: reset "enable_sink" flag when need be
sched/fair: prevent possible infinite loop in sched_group_energy
ANDROID: qtaguid: Fix the UAF probelm with tag_ref_tree
UPSTREAM: ANDROID: binder: remove waitqueue when thread exits.
ANDROID: sdcardfs: Protect set_top
ANDROID: fsnotify: Notify lower fs of open
Revert "ANDROID: sdcardfs: notify lower file of opens"
ANDROID: sdcardfs: Use lower getattr times/size
ANDROID: sched: EAS: check energy_aware() before calling select_energy_cpu_brute() in up-migrate path
UPSTREAM: eventpoll.h: add missing epoll event masks
BACKPORT: thermal/drivers/hisi: Add support for hi3660 SoC
BACKPORT: thermal/drivers/hisi: Prepare to add support for other hisi platforms
BACKPORT: thermal/drivers/hisi: Add platform prefix to function name
BACKPORT: thermal/drivers/hisi: Put platform code together
BACKPORT: thermal/drivers/hisi: Use round up step value
BACKPORT: thermal/drivers/hisi: Move the clk setup in the corresponding functions
BACKPORT: thermal/drivers/hisi: Remove mutex_lock in the code
BACKPORT: thermal/drivers/hisi: Remove thermal data back pointer
BACKPORT: thermal/drivers/hisi: Convert long to int
BACKPORT: thermal/drivers/hisi: Rename and remove unused field
BACKPORT: thermal/drivers/hisi: Remove costly sensor inspection
BACKPORT: thermal/drivers/hisi: Fix configuration register setting
BACKPORT: thermal/drivers/hisi: Encapsulate register writes into helpers
BACKPORT: thermal/drivers/hisi: Remove pointless lock
BACKPORT: thermal/drivers/hisi: Remove the multiple sensors support
BACKPORT: thermal: hisilicon: constify thermal_zone_of_device_ops structures
ANDROID: xattr: Pass EOPNOTSUPP to permission2
ANDROID: sdcardfs: Move default_normal to superblock
UPSTREAM: tcp: fix a request socket leak
UPSTREAM: tcp: fix possible deadlock in TCP stack vs BPF filter
UPSTREAM: tcp: Add a tcp_filter hook before handle ack packet
FROMLIST: arm64: kpti: Fix the interaction between ASID switching and software PAN
FROMLIST: arm64: Move post_ttbr_update_workaround to C code
fscrypt: updates on 4.15-rc4
ANDROID: uid_sys_stats: fix the comment
BACKPORT: optee: fix invalid of_node_put() in optee_driver_init()
BACKPORT: tee: optee: sync with new naming of interrupts
BACKPORT: tee: indicate privileged dev in gen_caps
BACKPORT: tee: optee: interruptible RPC sleep
BACKPORT: tee: optee: add const to tee_driver_ops and tee_desc structures
BACKPORT: tee: tee_shm: Constify dma_buf_ops structures.
BACKPORT: tee: add forward declaration for struct device
BACKPORT: tee: optee: fix uninitialized symbol 'parg'
BACKPORT: tee.txt: standardize document format
BACKPORT: tee: add ARM_SMCCC dependency
clocksource: arch_timer: make virtual counter access configurable
arm64: issue isb when trapping CNTVCT_EL0 access
BACKPORT: arm64: Add CNTFRQ_EL0 trap handler
BACKPORT: arm64: Add CNTVCT_EL0 trap handler
ANDROID: sdcardfs: Fix missing break on default_normal
ANDROID: arm64: kaslr: fixup Falkor workaround for 4.9
ANDROID: usb: f_fs: Prevent gadget unbind if it is already unbound
arm64: Kconfig: Reword UNMAP_KERNEL_AT_EL0 kconfig entry
arm64: use RET instruction for exiting the trampoline
UPSTREAM: arm64: kaslr: Put kernel vectors address in separate data page
UPSTREAM: arm64: mm: Introduce TTBR_ASID_MASK for getting at the ASID in the TTBR
UPSTREAM: arm64: Kconfig: Add CONFIG_UNMAP_KERNEL_AT_EL0
UPSTREAM: arm64: entry: Add fake CPU feature for unmapping the kernel at EL0
UPSTREAM: arm64: tls: Avoid unconditional zeroing of tpidrro_el0 for native tasks
UPSTREAM: arm64: erratum: Work around Falkor erratum #E1003 in trampoline code
UPSTREAM: arm64: entry: Hook up entry trampoline to exception vectors
UPSTREAM: arm64: entry: Explicitly pass exception level to kernel_ventry macro
UPSTREAM: arm64: mm: Map entry trampoline into trampoline and kernel page tables
UPSTREAM: arm64: entry: Add exception trampoline page for exceptions from EL0
UPSTREAM: arm64: mm: Invalidate both kernel and user ASIDs when performing TLBI
UPSTREAM: arm64: mm: Add arm64_kernel_unmapped_at_el0 helper
UPSTREAM: arm64: mm: Allocate ASIDs in pairs
UPSTREAM: arm64: mm: Fix and re-enable ARM64_SW_TTBR0_PAN
UPSTREAM: arm64: mm: Rename post_ttbr0_update_workaround
UPSTREAM: arm64: mm: Move ASID from TTBR0 to TTBR1
UPSTREAM: arm64: mm: Temporarily disable ARM64_SW_TTBR0_PAN
UPSTREAM: arm64: mm: Use non-global mappings for kernel space
UPSTREAM: arm64: factor out entry stack manipulation
ANDROID: sdcardfs: Add default_normal option
ANDROID: sdcardfs: notify lower file of opens
blkdev: Refactoring block io latency histogram codes
UPSTREAM: netfilter: conntrack: use power efficient workqueue
ANDROID: binder: Remove obsolete proc waitqueue.
UPSTREAM: arm64: setup: introduce kaslr_offset()
UPSTREAM: kcov: fix comparison callback signature
UPSTREAM: kcov: support comparison operands collection
UPSTREAM: kcov: remove pointless current != NULL check
UPSTREAM: kcov: support compat processes
UPSTREAM: kcov: simplify interrupt check
UPSTREAM: kcov: make kcov work properly with KASLR enabled
UPSTREAM: kcov: add more missing includes
BACKPORT: irq: Make the irqentry text section unconditional
UPSTREAM: kasan: make get_wild_bug_type() static
UPSTREAM: kasan: separate report parts by empty lines
UPSTREAM: kasan: improve double-free report format
UPSTREAM: kasan: print page description after stacks
UPSTREAM: kasan: improve slab object description
UPSTREAM: kasan: change report header
UPSTREAM: kasan: simplify address description logic
UPSTREAM: kasan: change allocation and freeing stack traces headers
UPSTREAM: kasan: unify report headers
UPSTREAM: kasan: introduce helper functions for determining bug type
BACKPORT: kasan: report only the first error by default
UPSTREAM: kasan: fix races in quarantine_remove_cache()
UPSTREAM: kasan: resched in quarantine_remove_cache()
UPSTREAM: kasan, sched/headers: Uninline kasan_enable/disable_current()
UPSTREAM: kasan: drain quarantine of memcg slab objects
UPSTREAM: kasan: eliminate long stalls during quarantine reduction
UPSTREAM: kasan: support panic_on_warn
ANDROID: dma-buf/sw_sync: Rename active_list to link
ANDROID: initramfs: call free_initrd() when skipping init
BACKPORT: Documentation: tee subsystem and op-tee driver
BACKPORT: tee: add OP-TEE driver
BACKPORT: tee: generic TEE subsystem
BACKPORT: dt/bindings: add bindings for optee
BACKPORT: schedutil: Reset cached freq if it is not in sync with next_freq
sched: EAS/WALT: Don't take into account of running task's util
sched: EAS/WALT: take into account of waking task's load
sched: EAS: upmigrate misfit current task
sched: avoid pushing tasks to an offline CPU
sched: Extend active balance to accept 'push_task' argument
sched: walt: Correct WALT window size initialization
sched: WALT: account cumulative window demand
sched: EAS/WALT: finish accounting prior to task_tick
sched/fair: prevent meaningless active migration
sched: walt: Leverage existing helper APIs to apply invariance
UPSTREAM: net: xfrm: allow clearing socket xfrm policies.
UPSTREAM: time: Clean up CLOCK_MONOTONIC_RAW time handling
UPSTREAM: arm64: vdso: fix clock_getres for 4GiB-aligned res
f2fs: updates on 4.15-rc1
UPSTREAM: android: binder: fix type mismatch warning
BACKPORT: arm64: Use __pa_symbol for empty_zero_page
UPSTREAM: arm64: Use __pa_symbol for kernel symbols
UPSTREAM: mm: Introduce lm_alias
FROMLIST: binder: fix proc->files use-after-free
BACKPORT: xfrm: Clear sk_dst_cache when applying per-socket policy.
sched: WALT: fix potential overflow
sched: Update task->on_rq when tasks are moving between runqueues
sched: WALT: fix window mis-alignment
sched: EAS: kill incorrect nohz idle cpu kick
sched: EAS: fix incorrect energy delta calculation due to rounding error
sched: EAS/WALT: use cr_avg instead of prev_runnable_sum
sched: WALT: fix broken cumulative runnable average accounting
sched: deadline: WALT: account cumulative runnable avg
ANDROID: binder: clarify deferred thread work.
BACKPORT: net/tcp-fastopen: Add new API support
UPSTREAM: net: Remove __sk_dst_reset() in tcp_v6_connect()
UPSTREAM: net/tcp-fastopen: refactor cookie check logic
sched: compute task utilisation with WALT consistently
FROMLIST: arm64: Avoid aligning normal memory pointers in __memcpy_{to,from}io
UPSTREAM: security: bpf: replace include of linux/bpf.h with forward declarations
UPSTREAM: selinux: bpf: Add addtional check for bpf object file receive
UPSTREAM: selinux: bpf: Add selinux check for eBPF syscall operations
BACKPORT: security: bpf: Add LSM hooks for bpf object related syscall
BACKPORT: bpf: Add file mode configuration into bpf maps
cpufreq: Drop schedfreq governor
ANDROID: Revert "arm64: move ELF_ET_DYN_BASE to 4GB / 4MB"
ANDROID: Revert "arm: move ELF_ET_DYN_BASE to 4MB"
sched: EAS: Fix the condition to distinguish energy before/after
sched: EAS: update trg_cpu to backup_cpu if no energy saving for target_cpu
sched/fair: consider task utilization in group_max_util()
sched/fair: consider task utilization in group_norm_util()
sched/fair: enforce EAS mode
sched/fair: ignore backup CPU when not valid
sched/fair: trace energy_diff for non boosted tasks
UPSTREAM: sched/fair: Sync task util before slow-path wakeup
UPSTREAM: sched/core: Add missing update_rq_clock() call in set_user_nice()
UPSTREAM: sched/core: Add missing update_rq_clock() call for task_hot()
UPSTREAM: sched/core: Add missing update_rq_clock() in detach_task_cfs_rq()
UPSTREAM: sched/core: Add missing update_rq_clock() in post_init_entity_util_avg()
UPSTREAM: sched/fair: Fix task group initialization
cpufreq/sched: Consider max cpu capacity when choosing frequencies
cpufreq/sched: Use cpu max freq rather than policy max
sched/fair: remove erroneous RCU_LOCKDEP_WARN from start_cpu()
FROMLIST: ALSA: usx2y: Suppress kernel warning at page allocation failures
FROMLIST: kbuild: clang: fix build failures with sparse check
Revert "Revert "BACKPORT: efi/libstub/arm64: Set -fpie when building the EFI stub""
BACKPORT: efi/libstub: Unify command line param parsing
ANDROID: sched/walt: Fix divide by zero error in cpufreq notifier
ANDROID: binder: show high watermark of alloc->pages.
ANDROID: binder: Add thread->process_todo flag.
ANDROID: sched/fair: Select correct capacity state for energy_diff
ANDROID: cpufreq-dt: Set sane defaults for schedutil rate limits
BACKPORT: cpufreq: schedutil: Use policy-dependent transition delays
Revert "BACKPORT: efi/libstub/arm64: Set -fpie when building the EFI stub"
FROMLIST: android: binder: Fix null ptr dereference in debug msg
FROMLIST: android: binder: Change binder_shrinker to static
UPSTREAM: arm64: compat: Remove leftover variable declaration
ANDROID: HACK: arm64: use -mno-implicit-float instead of -mgeneral-regs-only
ANDROID: Kbuild, LLVMLinux: allow overriding clang target triple
CHROMIUM: arm64: Disable asm-operand-width warning for clang
CHROMIUM: kbuild: clang: Disable the 'duplicate-decl-specifier' warning
BACKPORT: x86/asm: Fix inline asm call constraints for Clang
BACKPORT: efi/libstub/arm64: Set -fpie when building the EFI stub
UPSTREAM: efi/libstub/arm64: Force 'hidden' visibility for section markers
UPSTREAM: efi/libstub/arm64: Use hidden attribute for struct screen_info reference
UPSTREAM: x86/build: Use cc-option to validate stack alignment parameter
UPSTREAM: x86/build: Fix stack alignment for CLang
UPSTREAM: compiler, clang: always inline when CONFIG_OPTIMIZE_INLINING is disabled
UPSTREAM: x86/boot: #undef memcpy() et al in string.c
UPSTREAM: llist: clang: introduce member_address_is_nonnull()
UPSTREAM: crypto: arm64/sha - avoid non-standard inline asm tricks
UPSTREAM: kbuild: clang: Disable 'address-of-packed-member' warning
UPSTREAM: x86/build: Specify stack alignment for clang
UPSTREAM: x86/build: Use __cc-option for boot code compiler options
UPSTREAM: kbuild: Add __cc-option macro
UPSTREAM: x86/mm/kaslr: Use the _ASM_MUL macro for multiplication to work around Clang incompatibility
UPSTREAM: crypto, x86: aesni - fix token pasting for clang
UPSTREAM: x86/kbuild: Use cc-option to enable -falign-{jumps/loops}
UPSTREAM: compiler, clang: properly override 'inline' for clang
UPSTREAM: compiler, clang: suppress warning for unused static inline functions
UPSTREAM: modules: mark __inittest/__exittest as __maybe_unused
UPSTREAM: kbuild: Add support to generate LLVM assembly files
UPSTREAM: kbuild: use -Oz instead of -Os when using clang
UPSTREAM: kbuild, LLVMLinux: Add -Werror to cc-option to support clang
UPSTREAM: kbuild: drop -Wno-unknown-warning-option from clang options
UPSTREAM: kbuild: fix asm-offset generation to work with clang
UPSTREAM: kbuild: consolidate redundant sed script ASM offset generation
UPSTREAM: kbuild: Consolidate header generation from ASM offset information
UPSTREAM: kbuild: clang: add -no-integrated-as to KBUILD_[AC]FLAGS
UPSTREAM: kbuild: Add better clang cross build support
FROMLIST: f2fs: expose some sectors to user in inline data or dentry case
UPSTREAM: sched/fair: Fix usage of find_idlest_group() when the local group is idlest
UPSTREAM: sched/fair: Fix usage of find_idlest_group() when no groups are allowed
UPSTREAM: sched/fair: Fix find_idlest_group() when local group is not allowed
UPSTREAM: sched/fair: Remove unnecessary comparison with -1
UPSTREAM: sched/fair: Move select_task_rq_fair() slow-path into its own function
UPSTREAM: sched/fair: Force balancing on NOHZ balance if local group has capacity
UPSTREAM: f2fs: fix potential panic during fstrim
f2fs: catch up to v4.14-rc1
UPSTREAM: sched: use load_avg for selecting idlest group
UPSTREAM: sched: fix find_idlest_group for fork
ANDROID: binder: fix node sched policy calculation
ANDROID: binder: init desired_prio.sched_policy before use it
BACKPORT: net: xfrm: support setting an output mark.
FROMLIST: tracing: Add support for preempt and irq enable/disable events
FROMLIST: tracing: Prepare to add preempt and irq trace events
Conflicts:
arch/arm64/Kconfig
arch/arm64/include/asm/assembler.h
arch/arm64/include/asm/cpucaps.h
arch/arm64/include/asm/efi.h
arch/arm64/include/asm/memory.h
arch/arm64/include/asm/mmu.h
arch/arm64/include/asm/mmu_context.h
arch/arm64/kernel/cpufeature.c
arch/arm64/kernel/io.c
arch/arm64/kernel/setup.c
arch/arm64/kernel/vdso.c
arch/arm64/mm/context.c
arch/arm64/mm/mmu.c
drivers/Kconfig
drivers/Makefile
drivers/cpufreq/Kconfig
drivers/hwtracing/coresight/coresight-etm4x.c
drivers/hwtracing/coresight/coresight-priv.h
drivers/hwtracing/coresight/coresight-tmc-etr.c
drivers/hwtracing/coresight/coresight.c
drivers/scsi/ufs/ufshcd.h
drivers/staging/android/ion/ion-ioctl.c
drivers/staging/android/ion/ion_system_heap.c
drivers/usb/dwc3/gadget.c
include/linux/sched.h
include/trace/events/sched.h
kernel/kcov.c
kernel/sched/core.c
kernel/sched/cpufreq_sched.c
kernel/sched/cpufreq_schedutil.c
kernel/sched/fair.c
kernel/sched/sched.h
kernel/sched/walt.c
kernel/sched/walt.h
mm/kasan/report.c
security/security.c
security/selinux/hooks.c
Change-Id: I0ec8cbca6cb6384e22fbbe8def8a9d228229dc48
Signed-off-by: Blagovest Kolenichev <bkolenichev@codeaurora.org>
With CONFIG_LTO_CLANG enabled, LLVM IR won't be compiled into object
files until modpost_link. This change postpones calls to recordmcount
until after this step.
In order to exclude ftrace_process_locs from inspection, we add a new
code section .text..ftrace, which we tell recordmcount to ignore, and
a __norecordmcount attribute for moving functions to this section.
Bug: 62093296
Bug: 67506682
Change-Id: Iba2c053968206acf533fadab1eb34a743b5088ee
(am from https://patchwork.kernel.org/patch/10060327/)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
This change adds the configuration option CONFIG_LTO_CLANG, and
build system support for clang's Link Time Optimization (LTO). In
preparation for LTO support for other compilers, potentially common
parts of the changes are gated behind CONFIG_LTO instead.
With -flto, instead of object files, clang produces LLVM bitcode,
which is compiled into a native object at link time, allowing the
final binary to be optimized globally. For more details, see:
https://llvm.org/docs/LinkTimeOptimization.html
While the kernel normally uses GNU ld for linking, LLVM supports LTO
only with lld or GNU gold linkers. This patch set assumes gold will
be used with the LLVMgold plug-in to perform the LTO link step. Due
to potential incompatibilities with GNU ld, this change also adds
LDFINAL_vmlinux for using a different linker for the vmlinux_link
step, and defaults to using GNU ld.
Assuming LLVMgold.so is in LD_LIBRARY_PATH and CONFIG_LTO_CLANG has
been selected, an LTO kernel can be built simply by running make
CC=clang. LTO requires clang >= 5.0 and gold from binutils >= 2.27.
Bug: 62093296
Bug: 67506682
Change-Id: Ibcd9fc7ec501b4f30b43b4877897615645f8655f
(am from https://patchwork.kernel.org/patch/10060329/)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Add rules to kbuild in order to generate LLVM assembly files with the .ll
extension when using clang.
# from c code
make CC=clang kernel/pid.ll
Signed-off-by: Vinícius Tinti <viniciustinti@gmail.com>
Signed-off-by: Behan Webster <behanw@converseincode.com>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
(cherry picked from commit 433db3e260bc8134d4a46ddf20b3668937e12556)
Add support to compile device tree overlay blob.
'dtbo-y' target can be used to specify DT overlay blob.
'<target>-obj' must be specified to list base and overlay blobs.
CRs-Fixed: 2026435
Change-Id: Ib5036c70ba46374619cc43f9f7b697e1a444aebf
Signed-off-by: Shashank Mittal <mittals@codeaurora.org>
Signed-off-by: Puja Gupta <pujag@codeaurora.org>
The CRC code for asm exports grabs the preprocessed asm, finds the
___EXPORT_SYMBOL and turns those into EXPORT_SYMBOL in a C program
that can be preprocessed and parsed to create the CRC signatures from
the type.
The existing regex matching and replacement is too strict, and doesn't
deal well with whitespace among other things. The line
" EXPORT_SYMBOL(sym)" in a .S file would not match due to initial
whitespace, for example, which resulted in x86's ___preempt_schedule
failing to get CRCs.
Reported-by: Philip Müller <philm@manjaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Allow architectures to create asm/asm-prototypes.h file that
provides C prototypes for exported asm functions, which enables
proper CRC versions to be generated for them.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
ld -r is an incremental link used to create built-in.o files in build
subdirectories. It produces relocatable object files containing all
its input files, and these are are then pulled together and relocated
in the final link. Aside from the bloat, this constrains the final
link relocations, which has bitten large powerpc builds with
unresolvable relocations in the final link.
Alan Modra has recommended the kernel use thin archives for linking.
This is an alternative and means that the linker has more information
available to it when it links the kernel.
This patch enables a config option architectures can select, which
causes all built-in.o files to be built as thin archives. built-in.o
files in subdirectories do not get symbol table or index attached,
which improves speed and size. The final link pass creates a
built-in.o archive in the root output directory which includes the
symbol table and index. The linker then uses takes this file to link.
The --whole-archive linker option is required, because the linker now
has visibility to every individual object file, and it will otherwise
just completely avoid including those without external references
(consider a file with EXPORT_SYMBOL or initcall or hardware exceptions
as its only entry points). The traditional built works "by luck" as
built-in.o files are large enough that they're going to get external
references. However this optimisation is unpredictable for the kernel
(due to above external references), ineffective at culling unused, and
costly because the .o files have to be searched for references.
Superior alternatives for link-time culling should be used instead.
Build characteristics for inclink vs thinarc, on a small powerpc64le
pseries VM with a modest .config:
inclink thinarc
sizes
vmlinux 15 618 680 15 625 028
sum of all built-in.o 56 091 808 1 054 334
sum excluding root built-in.o 151 430
find -name built-in.o | xargs rm ; time make vmlinux
real 22.772s 21.143s
user 13.280s 13.430s
sys 4.310s 2.750s
- Final kernel pulled in only about 6K more, which shows how
ineffective the object file culling is.
- Build performance looks improved due to less pagecache activity.
On IO constrained systems it could be a bigger win.
- Build size saving is significant.
Side note, the toochain understands archives, so there's some tricks,
$ ar t built-in.o # list all files you linked with
$ size built-in.o # and their sizes
$ objdump -d built-in.o # disassembly (unrelocated) with filenames
Implementation by sfr, minor tweaks by npiggin.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Collect the symbols exported by anything that goes into lib.a and
add an empty object (lib-exports.o) with explicit undefs for each
of those to obj-y.
That allows to relax the rules regarding the use of exports in
lib-* objects - right now an object with export can be in lib-*
only if we are guaranteed that there always will be users in
built-in parts of the tree, otherwise it needs to be in obj-*.
As the result, we have an unholy mix of lib- and obj- in lib/Makefile
and (especially) in arch/*/lib/Makefile. Moreover, a change in
generic part of the kernel can lead to mysteriously missing exports
on some configs. With this change we don't have to worry about
that anymore.
One side effect is that built-in.o now pulls everything with exports
from the corresponding lib.a (if such exists). That's exactly what
we want for linking vmlinux and fortunately it's almost the only thing
built-in.o is used in. arch/ia64/hp/sim/boot/bootloader is the only
exception and it's easy to get rid of now - just turn everything in
arch/ia64/lib into lib-* and don't bother with arch/ia64/lib/built-in.o
anymore.
[AV: stylistic fix from Michal folded in]
Acked-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Infrastructure for building independent shared library targets.
Based on work created by the PaX Team.
Signed-off-by: Emese Revfy <re.emese@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
This command just preprocesses .S files into .s files, so cmd_cpp_s_S
seems more suitable.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
This command just preprocesses .c files into .i files, so cmd_cpp_i_c
seems more suitable.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
The generation and postprocessing of automatic dependency rules is
duplicated in rule_cc_o_c, rule_as_o_S and if_changed_dep. Since
this is not a trivial one-liner action, it is now abstracted under
cmd_and_fixdep to simplify things and make future changes in this area
easier.
In the rule_cc_o_c and rule_as_o_S cases that means the order of some
commands has been altered, namely fixdep and related file manipulations
are executed earlier, but they didn't depend on those commands that now
execute later.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Kernel modules are partially linked object files with some undefined
symbols that are expected to be matched with EXPORT_SYMBOL() entries
from elsewhere.
Each .tmp_versions/*.mod file currently contains two line of text
separated by a newline character. The first line has the actual module
file name while the second line has a list of object files constituting
that module. Those files are parsed by modpost (scripts/mod/sumversion.c),
scripts/Makefile.modpost, scripts/Makefile.modsign, etc. Only the
modpost utility cares about the second line while the others retrieve
only the first line.
Therefore we can add a third line to record the list of undefined symbols
aka required EXPORT_SYMBOL() entries for each module into that file
without breaking anything. Like for the second line, symbols are separated
by a blank and the list is terminated with a newline character.
To avoid needless build overhead, the undefined symbols extraction is
performed only when CONFIG_TRIM_UNUSED_KSYMS is selected.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
This allows to write
drm-$(CONFIG_AGP) += drm_agpsupport.o
without having to handle CONFIG_AGP=y vs. CONFIG_AGP=m. Only support
this syntax for modules, since built-in code depending on something
modular cannot work and init/Makefile actually relies on the current
semantics. There are a few drivers which adapted to the current
semantics out of necessity; these are fixed to also work when the
respective subsystem is modular.
Acked-by: Peter Chen <peter.chen@freescale.com> [chipidea]
Signed-off-by: Michal Marek <mmarek@suse.com>
If the kernel is compiled with function tracer support the -pg compile option
is passed to gcc to generate extra code into the prologue of each function.
This patch replaces the "open-coded" -pg compile flag with a CC_FLAGS_FTRACE
makefile variable which architectures can override if a different option
should be used for code generation.
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Kconfig never defines CONFIG_* as 'n'.
Now obj-n is only used in firmware/Makefile and it can be
replaced with obj-. No makefile uses lib-n.
Let's rip off obj-n and lib-n.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Peter Foley <pefoley2@pefoley.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The comment in scripts/Makefile.build says as follows:
We would rather have a list of rules like
foo.o: $(foo-objs)
but that's not so easy, so we rather make all composite objects depend
on the set of all their parts
This commit makes it possible!
For example, assume a Makefile like this
obj-m = foo.o bar.o
foo-objs := foo1.o foo2.o
bar-objs := bar1.o bar2.o
Without this patch, foo.o depends on all of
foo1.o foo2.o bar1.o bar2.o.
It looks funny that foo.o is regenerated when bar1.c is updated.
Now we can handle the dependency of foo.o and bar.o separately.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
W=... provides extra gcc checks.
Having such code in scripts/Makefile.build results in the same flags
being added to KBUILD_CFLAGS multiple times becuase
scripts/Makefile.build is invoked every time Kbuild descends into
the subdirectories.
Since the top Makefile is already too cluttered, this commit moves
all of extra gcc check stuff to a new file scripts/Makefile.extrawarn,
which is included from the top Makefile.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
CC: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
When compiling kernel with clang, disable warnings which are too noisy, and
add the clang flag catch-undefined-behavior.
Signed-off-by: Jan-Simon Möller <dl9pf@gmx.de>
Signed-off-by: Behan Webster <behanw@converseincode.com>
Signed-off-by: Mark Charlebois <mcharleb@gmail.com>
Cc: PaX Team <pageexec@freemail.hu>
Pass symbol-prefix to genksyms instead of arch, so that the decision
what symbol prefix to use is kept in one place.
Basically genksyms used to take a -a $ARCH argument and it used that to
determine whether to add an underscore symbol prefix. It's now changed
to take a -s $SYMBOL_PREFIX argument so that the caller decides whether
a symbol prefix is required. The build system then uses
CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX to determine whether to pass the
argument.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Add a simple ASN.1 grammar compiler. This produces a bytecode output that can
be fed to a decoder to inform the decoder how to interpret the ASN.1 stream it
is trying to parse.
Action functions can be specified in the grammar by interpolating:
({ foo })
after a type, for example:
SubjectPublicKeyInfo ::= SEQUENCE {
algorithm AlgorithmIdentifier,
subjectPublicKey BIT STRING ({ do_key_data })
}
The decoder is expected to call these after matching this type and parsing the
contents if it is a constructed type.
The grammar compiler does not currently support the SET type (though it does
support SET OF) as I can't see a good way of tracking which members have been
encountered yet without using up extra stack space.
Currently, the grammar compiler will fail if more than 256 bytes of bytecode
would be produced or more than 256 actions have been specified as it uses
8-bit jump values and action indices to keep space usage down.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
-Wmissing-field-initializers is too noisy to be useful on W=1. Let's
move it to W=2.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Usage of these flags has been deprecated for nearly 4 years by:
commit f77bf01425
Author: Sam Ravnborg <sam@neptun.(none)>
Date: Mon Oct 15 22:25:06 2007 +0200
kbuild: introduce ccflags-y, asflags-y and ldflags-y
Moreover, these flags (at least EXTRA_CFLAGS) have been documented for
command line use. By default, gmake(1) do not override command line
setting, so this is likely to result in build failure or unexpected
behavior.
Do not advertise for its usage.
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
kbuild: make KBUILD_NOCMDDEP=1 handle empty built-in.o
scripts/kallsyms.c: fix potential segfault
scripts/gen_initramfs_list.sh: Convert to a /bin/sh script
kbuild: Fix GNU make v3.80 compatibility
kbuild: Fix passing -Wno-* options to gcc 4.4+
kbuild: move scripts/basic/docproc.c to scripts/docproc.c
kbuild: Fix Makefile.asm-generic for um
kbuild: Allow to combine multiple W= levels
kbuild: Disable -Wunused-but-set-variable for gcc 4.6.0
Fix handling of backlash character in LINUX_COMPILE_BY name
kbuild: asm-generic support
kbuild: implement several W= levels
kbuild: Fix build with binutils <= 2.19
initramfs: Use KBUILD_BUILD_TIMESTAMP for generated entries
kbuild: Allow to override LINUX_COMPILE_BY and LINUX_COMPILE_HOST macros
kbuild: Drop unused LINUX_COMPILE_TIME and LINUX_COMPILE_DOMAIN macros
kbuild: Use the deterministic mode of ar
kbuild: Call gzip with -n
kbuild: move KALLSYMS_EXTRA_PASS from Kconfig to Makefile
Kconfig: improve KALLSYMS_ALL documentation
Fix up trivial conflict in Makefile
Modifications to recordmcount must be performed on all object
files to stay consistent with what the kernel code may expect.
Add the recordmcount files to the main dependencies to make sure
any change to them causes a full recompile.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Link: http://lkml.kernel.org/r/20110517133646.GP13293@sepie.suse.cz
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When mcount is called in a section that ftrace will not modify it into
a nop, we want to warn about this. But not warn about this always. Now
if the user builds the kernel with the option RECORDMCOUNT_WARN=1 then
the build will warn about mcount callers that are ignored and will just
waste execution time.
Acked-by: Michal Marek <mmarek@suse.cz>
Cc: linux-kbuild@vger.kernel.org
Link: http://lkml.kernel.org/r/20110421023738.714956282@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add support for make W=12, make W=123 and so on, to enable warnings from
multiple W= levels. Normally, make W=<level> does not include warnings
from the previous level.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-By: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Disable the new -Wunused-but-set-variable that was added in gcc 4.6.0
It produces more false positives than useful warnings.
This can still be enabled using W=1
Signed-off-by: Dave Jones <davej@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Building a kernel with "make W=1" produces far too much noise to be
useful.
Divide the warning options in three groups:
W=1 - warnings that may be relevant and does not occur too often
W=2 - warnings that occur quite often but may still be relevant
W=3 - the more obscure warnings, can most likely be ignored
When building the whole kernel, those levels produce:
W=1 - 4859 warnings
W=2 - 1394 warnings
W=3 - 86666 warnings
respectively. Warnings have been counted with Geert's script at
http://www.kernel.org/pub/linux/kernel/people/geert/linux-log/linux-log-summary.pl
Many warnings occur from .h files so fixing one file may have a nice
effect on the total number of warnings.
With these changes I am actually tempted to try W=1 now and then.
Previously there was just too much noise.
Borislav:
- make the W= levels exclusive
- move very noisy and making little sense for the kernel warnings to W=3
- drop -Woverlength-strings due to useless warning message
- copy explanatory text for the different warning levels to 'make help'
- recount warnings per level
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Borislav Petkov <bp@alien8.de>
Cc: Dave Jones <davej@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Add a 'W=1' Makefile switch which adds additional checking per build
object.
The idea behind this option is targeted at developers who, in the
process of writing their code, want to do the occasional
make W=1 [target.o]
and let gcc do more extensive code checking for them. Then, they
could eyeball the output for valid gcc warnings about various
bugs/discrepancies which are not reported during the normal build
process.
For more background information and a use case, read through this
thread: http://marc.info/?l=kernel-janitors&m=129802065918147&w=2
Cc: Michal Marek <mmarek@suse.cz>
Cc: linux-kbuild@vger.kernel.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
cmd_record_mcount is used to locate the _mcount symbols in the object
files, only the files compiled with -pg has the _mcount symbol, so, it
is only needed for such files, but the current cmd_record_mcount is used
for all of the object files, so, we need to fix it and speed it up.
Since -pg may be removed by the method used in kernel/trace/Makefile:
ORIG_CFLAGS := $(KBUILD_CFLAGS)
KBUILD_CFLAGS = $(subst -pg,,$(ORIG_CFLAGS))
Or may be removed by the method used in arch/x86/kernel/Makefile:
CFLAGS_REMOVE_file.o = -pg
So, we must check the last variable stores the compiling flags, that is
c_flags(Please refer to cmd_cc_o_c and rule_cc_o_c defined in
scripts/Makefile.build) and since the CFLAGS_REMOVE_file.o is already
filtered in _c_flags(Please refer to scripts/Makefile.lib) and _c_flags
has less symbols, therefore, we only need to check _c_flags.
---------------
Changes from v1:
o Don't touch Makefile for CONFIG_FTRACE_MCOUNT_RECORD is enough
o Use _c_flags intead of KBUILD_CFLAGS to cover CONFIG_REMOVE_file.o = -pg
(feedback from Steven Rostedt <rostedt@goodmis.org>)
Acked-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
LKML-Reference: <3dc8cddf022eb7024f9f2cf857529a15bee8999a.1288196498.git.wuzhangjin@gmail.com>
[ changed if [ .. == .. ] to if [ .. = .. ] to handle dash environments ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (278 commits)
arm: remove machine_desc.io_pg_offst and .phys_io
arm: use addruart macro to establish debug mappings
arm: return both physical and virtual addresses from addruart
arm/debug: consolidate addruart macros for CONFIG_DEBUG_ICEDCC
ARM: make struct machine_desc definition coherent with its comment
eukrea_mbimxsd-baseboard: Pass the correct GPIO to gpio_free
cpuimx27: fix compile when ULPI is selected
mach-pcm037_eet: fix compile errors
Fixing ethernet driver compilation error for i.MX31 ADS board
cpuimx51: update board support
mx5: add cpuimx51sd module and its baseboard
iomux-mx51: fix GPIO_1_xx 's IOMUX configuration
imx-esdhc: update devices registration
mx51: add resources for SD/MMC on i.MX51
iomux-mx51: fix SD1 and SD2's iomux configuration
clock-mx51: rename CLOCK1 to CLOCK_CCGR for better readability
clock-mx51: factorize clk_set_parent and clk_get_rate
eukrea_mbimxsd: add support for DVI displays
cpuimx25 & cpuimx35: fix OTG port registration in host mode
i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472
...
When DYNAMIC_FTRACE is enabled and we use the C version of recordmcount,
all objects are run through the recordmcount program to create a
separate section that stores all the callers of mcount.
The build process has a special file: scripts/mod/empty.o. This is
built from empty.c which is literally an empty file (except for a
single comment). This file is used to find information about the target
elf format, like endianness and word size.
The problem comes up when we need to build recordmcount. The
build process requires that empty.o is built first. The build rules
for empty.o will try to execute recordmcount on the empty.o file.
We get an error that recordmcount does not exist.
To avoid this recursion, the build file will skip running recordmcount
if the file that it is building is script/mod/empty.o.
[ extra comment Suggested-by: Sam Ravnborg <sam@ravnborg.org> ]
Reported-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Ingo Molnar <mingo@elte.hu>
Cc: Michal Marek <mmarek@suse.cz>
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The C version of recordmcount is compiled to a binary, which will
end up located in the objtree. If the kernel is built with O=path,
the srctree will not include the binary recordmcount caller.
Cc: Michal Marek <mmarek@suse.cz>
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch adds the support for the C version of recordmcount and
compile times show ~ 12% improvement.
After verifying this works, other archs can add:
HAVE_C_MCOUNT_RECORD
in its Kconfig and it will use the C version of recordmcount
instead of the perl version.
Cc: <linux-arch@vger.kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: linux-kbuild@vger.kernel.org
Cc: John Reiser <jreiser@bitwagon.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On ARM, we have two ABIs, and the ABI used is controlled via a config
option. Object files built with one ABI can't be merged with object
files built with the other ABI. So, record_mcount.pl needs to use the
same compiler flags as the kernel when generating the object file with
the mcount locations. Ensure this by passing CFLAGS to the script.
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
It is now possible to assign options to AS and CC
on the command line - which is only used for built-in code.
{A,C}FLAGS_KERNEL was used both in the top-level Makefile
in the arch makefiles, thus users had no way to specify
additional options to AS, CC without overriding
the original value.
Introduce a new set of variables KBUILD_{A,C}FLAGS_KERNEL
that is used by arch specific files and free up
{A,C}FLAGS_KERNEL so they can be assigned on
the command line.
All arch Makefiles that used the old variables has been updated.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
It is now possible to assign options to AS, CC and LD
on the command line - which is only used when building modules.
{A,C,LD}FLAGS_MODULE was all used both in the top-level Makefile
in the arch makefiles, thus users had no way to specify
additional options to AS, CC, LD when building modules
without overriding the original value.
Introduce a new set of variables KBUILD_{A,C,LD}FLAGS_MODULE
that is used by arch specific files and free up
{A,C,LD}FLAGS_MODULE so they can be assigned on
the command line.
All arch Makefiles that used the old variables has been updated.
Note: Previously we had a MODFLAGS variable for both
AS and CC. But in favour of consistency this was dropped.
So in some cases arch Makefile has one assignmnet replaced by
two assignmnets.
Note2: MODFLAGS was not documented and is dropped
without any notice. I do not expect much/any breakage
from this.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Acked-by: Mike Frysinger <vapier@gentoo.org> [blackfin]
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [avr32]
Signed-off-by: Michal Marek <mmarek@suse.cz>
commit 37a8d9f67f tried to combine some
duplicate code and accidentally broke how KBUILD_SYMTYPES worked
This fixes the code to match the original intention by the author who
originally added the code I believe.
The fixes include:
- removing extra whitespaces in the if-statements
- moving the if-statement from around the -r to the -T
- adding a second arg to cmd_gensymtypes to simplify the options passed
to genksyms.
Tested by instrumenting genksyms and seeing what options were passed in
during a make, KBUILD_SYMTYPES make, and when a foo.symref was created.
Everything compiled and looked ok.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This patch fixes the link error "built-in.o: no such file or directory".
The problem happens if "dirx/Makefile" contains only "obj-m += diry/
dirz/" and the empty "dirx/built-in.o" is missing. Adding $(subdir-m)
into check for builtin-target fixes this error.
Signed-off-by: Jiafu He <jay@goldhive.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
