bka
97 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Michael Bestas
|
87cf1c2fc1 |
Merge remote-tracking branch 'common/android-4.9-q' into android-msm-pixel-4.9
* common/android-4.9-q:
Linux 4.9.321
swiotlb: skip swiotlb_bounce when orig_addr is zero
kexec_file: drop weak attribute from arch_kexec_apply_relocations[_add]
fdt: Update CRC check for rng-seed
xen: unexport __init-annotated xen_xlate_map_ballooned_pages()
drm: remove drm_fb_helper_modinit
powerpc/pseries: wire up rng during setup_arch()
modpost: fix section mismatch check for exported init/exit sections
ARM: cns3xxx: Fix refcount leak in cns3xxx_init
ARM: Fix refcount leak in axxia_boot_secondary
ARM: exynos: Fix refcount leak in exynos_map_pmu
ARM: dts: imx6qdl: correct PU regulator ramp delay
powerpc: Enable execve syscall exit tracepoint
xtensa: Fix refcount leak bug in time.c
xtensa: xtfpga: Fix refcount leak bug in setup
iio: trigger: sysfs: fix use-after-free on remove
iio: accel: mma8452: ignore the return value of reset operation
iio:accel:bma180: rearrange iio trigger get and register
usb: chipidea: udc: check request status before setting device address
iio: adc: vf610: fix conversion mode sysfs node name
igb: Make DMA faster when CPU is active on the PCIe link
MIPS: Remove repetitive increase irq_err_count
x86/xen: Remove undefined behavior in setup_features()
bonding: ARP monitor spams NETDEV_NOTIFY_PEERS notifiers
USB: serial: option: add Telit LE910Cx 0x1250 composition
random: quiet urandom warning ratelimit suppression message
dm era: commit metadata in postsuspend after worker stops
ata: libata: add qc->flags in ata_qc_complete_template tracepoint
random: schedule mix_interrupt_randomness() less often
vt: drop old FONT ioctls
BACKPORT: l2tp: fix race in pppol2tp_release with session object destroy
BACKPORT: l2tp: don't use inet_shutdown on ppp session destroy
Linux 4.9.320
tcp: drop the hash_32() part from the index calculation
tcp: increase source port perturb table to 2^16
tcp: dynamically allocate the perturb table used by source ports
tcp: add small random increments to the source port
tcp: use different parts of the port_offset for index and offset
secure_seq: use the 64 bits of the siphash for port offset calculation
tcp: add some entropy in __inet_hash_connect()
tcp: change source port randomizarion at connect() time
fuse: fix pipe buffer lifetime for direct_io
Reinstate some of "swiotlb: rework "fix info leak with DMA_FROM_DEVICE""
swiotlb: fix info leak with DMA_FROM_DEVICE
xprtrdma: fix incorrect header size calculations
s390/mm: use non-quiescing sske for KVM switch to keyed guest
l2tp: fix race in pppol2tp_release with session object destroy
l2tp: don't use inet_shutdown on ppp session destroy
ext4: add reserved GDT blocks check
ext4: make variable "count" signed
ext4: fix bug_on ext4_mb_use_inode_pa
serial: 8250: Store to lsr_save_flags after lsr read
usb: gadget: lpc32xx_udc: Fix refcount leak in lpc32xx_udc_probe
USB: serial: io_ti: add Agilent E5805A support
USB: serial: option: add support for Cinterion MV31 with new baseline
comedi: vmk80xx: fix expression for tx buffer size
irqchip/gic-v3: Iterate over possible CPUs by for_each_possible_cpu()
irqchip/gic/realview: Fix refcount leak in realview_gic_of_init
misc: atmel-ssc: Fix IRQ check in ssc_probe
pNFS: Don't keep retrying if the server replied NFS4ERR_LAYOUTUNAVAILABLE
random: credit cpu and bootloader seeds by default
net: ethernet: mtk_eth_soc: fix misuse of mem alloc interface netdev[napi]_alloc_frag
ipv6: Fix signed integer overflow in l2tp_ip6_sendmsg
nfc: nfcmrvl: Fix memory leak in nfcmrvl_play_deferred
virtio-mmio: fix missing put_device() when vm_cmdline_parent registration failed
scsi: lpfc: Fix port stuck in bypassed state after LIP in PT2PT topology
scsi: vmw_pvscsi: Expand vcpuHint to 16 bits
ASoC: wm8962: Fix suspend while playing music
ata: libata-core: fix NULL pointer deref in ata_host_alloc_pinfo()
ASoC: cs42l56: Correct typo in minimum level for SX volume controls
ASoC: cs42l52: Correct TLV for Bypass Volume
ASoC: cs53l30: Correct number of volume levels on SX controls
ASoC: cs42l52: Fix TLV scales for mixer controls
random: account for arch randomness in bits
random: mark bootloader randomness code as __init
random: avoid checking crng_ready() twice in random_init()
crypto: drbg - make reseeding from get_random_bytes() synchronous
crypto: drbg - always try to free Jitter RNG instance
crypto: drbg - move dynamic ->reseed_threshold adjustments to __drbg_seed()
crypto: drbg - track whether DRBG was seeded with !rng_is_initialized()
crypto: drbg - prepare for more fine-grained tracking of seeding state
crypto: drbg - always seeded with SP800-90B compliant noise source
crypto: drbg - add FIPS 140-2 CTRNG for noise source
Revert "random: use static branch for crng_ready()"
random: check for signals after page of pool writes
random: wire up fops->splice_{read,write}_iter()
random: convert to using fops->write_iter()
random: move randomize_page() into mm where it belongs
random: move initialization functions out of hot pages
random: use proper return types on get_random_{int,long}_wait()
random: remove extern from functions in header
random: use static branch for crng_ready()
random: credit architectural init the exact amount
random: handle latent entropy and command line from random_init()
random: use proper jiffies comparison macro
random: remove ratelimiting for in-kernel unseeded randomness
random: avoid initializing twice in credit race
random: use symbolic constants for crng_init states
siphash: use one source of truth for siphash permutations
random: help compiler out with fast_mix() by using simpler arguments
random: do not use input pool from hard IRQs
random: order timer entropy functions below interrupt functions
random: do not pretend to handle premature next security model
random: do not use batches when !crng_ready()
random: insist on random_get_entropy() existing in order to simplify
uapi: rename ext2_swab() to swab() and share globally in swab.h
xtensa: use fallback for random_get_entropy() instead of zero
sparc: use fallback for random_get_entropy() instead of zero
um: use fallback for random_get_entropy() instead of zero
x86/tsc: Use fallback for random_get_entropy() instead of zero
nios2: use fallback for random_get_entropy() instead of zero
arm: use fallback for random_get_entropy() instead of zero
mips: use fallback for random_get_entropy() instead of just c0 random
m68k: use fallback for random_get_entropy() instead of zero
timekeeping: Add raw clock fallback for random_get_entropy()
powerpc: define get_cycles macro for arch-override
alpha: define get_cycles macro for arch-override
parisc: define get_cycles macro for arch-override
s390: define get_cycles macro for arch-override
ia64: define get_cycles macro for arch-override
init: call time_init() before rand_initialize()
random: fix sysctl documentation nits
random: document crng_fast_key_erasure() destination possibility
random: make random_get_entropy() return an unsigned long
random: check for signals every PAGE_SIZE chunk of /dev/[u]random
random: check for signal_pending() outside of need_resched() check
random: do not allow user to keep crng key around on stack
random: do not split fast init input in add_hwgenerator_randomness()
random: mix build-time latent entropy into pool at init
random: re-add removed comment about get_random_{u32,u64} reseeding
random: treat bootloader trust toggle the same way as cpu trust toggle
random: skip fast_init if hwrng provides large chunk of entropy
random: check for signal and try earlier when generating entropy
random: reseed more often immediately after booting
random: make consistent usage of crng_ready()
random: use SipHash as interrupt entropy accumulator
random: replace custom notifier chain with standard one
random: don't let 644 read-only sysctls be written to
random: give sysctl_random_min_urandom_seed a more sensible value
random: do crng pre-init loading in worker rather than irq
random: unify cycles_t and jiffies usage and types
random: cleanup UUID handling
random: only wake up writers after zap if threshold was passed
random: round-robin registers as ulong, not u32
random: clear fast pool, crng, and batches in cpuhp bring up
random: pull add_hwgenerator_randomness() declaration into random.h
hwrng: remember rng chosen by user
hwrng: use rng source with best quality
hwrng: core - remove unused PFX macro
hwrng: core - Move hwrng miscdev minor number to include/linux/miscdevice.h
hwrng: core - Rewrite the header
hwrng: core - rewrite better comparison to NULL
hwrng: core - do not use multiple blank lines
random: check for crng_init == 0 in add_device_randomness()
random: unify early init crng load accounting
random: do not take pool spinlock at boot
random: defer fast pool mixing to worker
workqueue: make workqueue available early during boot
random: rewrite header introductory comment
random: group sysctl functions
random: group userspace read/write functions
random: group entropy collection functions
random: group entropy extraction functions
random: group initialization wait functions
random: remove whitespace and reorder includes
random: remove useless header comment
random: introduce drain_entropy() helper to declutter crng_reseed()
random: deobfuscate irq u32/u64 contributions
random: add proper SPDX header
random: remove unused tracepoints
random: remove ifdef'd out interrupt bench
random: tie batched entropy generation to base_crng generation
random: zero buffer after reading entropy from userspace
random: remove outdated INT_MAX >> 6 check in urandom_read()
random: use hash function for crng_slow_load()
random: absorb fast pool into input pool after fast load
random: do not xor RDRAND when writing into /dev/random
random: ensure early RDSEED goes through mixer on init
random: inline leaves of rand_initialize()
random: use RDSEED instead of RDRAND in entropy extraction
random: fix locking in crng_fast_load()
random: remove batched entropy locking
random: remove use_input_pool parameter from crng_reseed()
random: make credit_entropy_bits() always safe
random: always wake up entropy writers after extraction
random: use linear min-entropy accumulation crediting
random: simplify entropy debiting
random: use computational hash for entropy extraction
random: only call crng_finalize_init() for primary_crng
random: access primary_pool directly rather than through pointer
random: continually use hwgenerator randomness
random: simplify arithmetic function flow in account()
random: access input_pool_data directly rather than through pointer
random: cleanup fractional entropy shift constants
random: prepend remaining pool constants with POOL_
random: de-duplicate INPUT_POOL constants
random: remove unused OUTPUT_POOL constants
random: rather than entropy_store abstraction, use global
random: try to actively add entropy rather than passively wait for it
random: remove unused extract_entropy() reserved argument
random: remove incomplete last_data logic
random: cleanup integer types
crypto: chacha20 - Fix chacha20_block() keystream alignment (again)
random: cleanup poolinfo abstraction
random: fix typo in comments
random: don't reset crng_init_cnt on urandom_read()
random: avoid superfluous call to RDRAND in CRNG extraction
random: early initialization of ChaCha constants
random: initialize ChaCha20 constants with correct endianness
random: use IS_ENABLED(CONFIG_NUMA) instead of ifdefs
random: harmonize "crng init done" messages
random: mix bootloader randomness into pool
random: do not re-init if crng_reseed completes before primary init
random: do not sign extend bytes for rotation when mixing
random: use BLAKE2s instead of SHA1 in extraction
random: remove unused irq_flags argument from add_interrupt_randomness()
random: document add_hwgenerator_randomness() with other input functions
crypto: blake2s - adjust include guard naming
crypto: blake2s - include <linux/bug.h> instead of <asm/bug.h>
MAINTAINERS: co-maintain random.c
random: remove dead code left over from blocking pool
random: avoid arch_get_random_seed_long() when collecting IRQ randomness
random: add arch_get_random_*long_early()
powerpc: Use bool in archrandom.h
linux/random.h: Mark CONFIG_ARCH_RANDOM functions __must_check
linux/random.h: Use false with bool
linux/random.h: Remove arch_has_random, arch_has_random_seed
powerpc: Remove arch_has_random, arch_has_random_seed
x86: Remove arch_has_random, arch_has_random_seed
random: avoid warnings for !CONFIG_NUMA builds
random: split primary/secondary crng init paths
random: remove some dead code of poolinfo
random: fix typo in add_timer_randomness()
random: Add and use pr_fmt()
random: convert to ENTROPY_BITS for better code readability
random: remove unnecessary unlikely()
random: remove kernel.random.read_wakeup_threshold
random: delete code to pull data into pools
random: remove the blocking pool
random: fix crash on multiple early calls to add_bootloader_randomness()
random: make /dev/random be almost like /dev/urandom
random: ignore GRND_RANDOM in getentropy(2)
random: add GRND_INSECURE to return best-effort non-cryptographic bytes
random: Add a urandom_read_nowait() for random APIs that don't warn
random: Don't wake crng_init_wait when crng_init == 1
lib/crypto: sha1: re-roll loops to reduce code size
lib/crypto: blake2s: move hmac construction into wireguard
crypto: blake2s - generic C library implementation and selftest
crypto: Deduplicate le32_to_cpu_array() and cpu_to_le32_array()
Revert "hwrng: core - Freeze khwrng thread during suspend"
char/random: Add a newline at the end of the file
random: Use wait_event_freezable() in add_hwgenerator_randomness()
fdt: add support for rng-seed
random: Support freezable kthreads in add_hwgenerator_randomness()
random: fix soft lockup when trying to read from an uninitialized blocking pool
latent_entropy: avoid build error when plugin cflags are not set
random: document get_random_int() family
random: move rand_initialize() earlier
random: only read from /dev/random after its pool has received 128 bits
drivers/char/random.c: make primary_crng static
drivers/char/random.c: remove unused stuct poolinfo::poolbits
drivers/char/random.c: constify poolinfo_table
random: make CPU trust a boot parameter
random: Make crng state queryable
random: remove preempt disabled region
random: add a config option to trust the CPU's hwrng
random: Return nbytes filled from hw RNG
random: Fix whitespace pre random-bytes work
drivers/char/random.c: remove unused dont_count_entropy
random: optimize add_interrupt_randomness
random: always fill buffer in get_random_bytes_wait
crypto: chacha20 - Fix keystream alignment for chacha20_block()
random: fix data race on crng_node_pool
random: always use batched entropy for get_random_u{32,64}
Revert "char/random: silence a lockdep splat with printk()"
char/random: silence a lockdep splat with printk()
random: add a spinlock_t to struct batched_entropy
random: rate limit unseeded randomness warnings
random: fix possible sleeping allocation from irq context
random: set up the NUMA crng instances after the CRNG is fully initialized
random: use a different mixing algorithm for add_device_randomness()
random: fix warning message on ia64 and parisc
random: reorder READ_ONCE() in get_random_uXX
random: suppress spammy warnings about unseeded randomness
random: do not ignore early device randomness
random: warn when kernel uses unseeded randomness
random: add get_random_{bytes,u32,u64,int,long,once}_wait family
random: add wait_for_random_bytes() API
random: silence compiler warnings and fix race
random: invalidate batched entropy after crng init
random: move random_min_urandom_seed into CONFIG_SYSCTL ifdef block
random: convert get_random_int/long into get_random_u32/u64
random: fix comment for unused random_min_urandom_seed
random: remove variable limit
random: remove stale urandom_init_wait
random: remove stale maybe_reseed_primary_crng
9p: missing chunk of "fs/9p: Don't update file type when updating file attributes"
Linux 4.9.319
x86/speculation/mmio: Print SMT warning
KVM: x86/speculation: Disable Fill buffer clear within guests
x86/speculation/mmio: Reuse SRBDS mitigation for SBDS
x86/speculation/srbds: Update SRBDS mitigation selection
x86/speculation/mmio: Add sysfs reporting for Processor MMIO Stale Data
x86/speculation/mmio: Enable CPU Fill buffer clearing on idle
x86/bugs: Group MDS, TAA & Processor MMIO Stale Data mitigations
x86/speculation/mmio: Add mitigation for Processor MMIO Stale Data
x86/speculation: Add a common function for MD_CLEAR mitigation update
x86/speculation/mmio: Enumerate Processor MMIO Stale Data bug
Documentation: Add documentation for Processor MMIO Stale Data
x86/cpu: Add another Alder Lake CPU to the Intel family
x86/cpu: Add Lakefield, Alder Lake and Rocket Lake models to the to Intel CPU family
x86/cpu: Add Comet Lake to the Intel CPU models header
x86/CPU: Add more Icelake model numbers
x86/CPU: Add Icelake model number
x86/cpu: Add Cannonlake to Intel family
x86/cpu: Add Jasper Lake to Intel family
cpu/speculation: Add prototype for cpu_show_srbds()
x86/cpu: Add Elkhart Lake to Intel family
ANDROID: arch: fix backported syscall numbers
Linux 4.9.318
tcp: fix tcp_mtup_probe_success vs wrong snd_cwnd
PCI: qcom: Fix unbalanced PHY init on probe errors
mtd: cfi_cmdset_0002: Use chip_ready() for write on S29GL064N
mtd: cfi_cmdset_0002: Move and rename chip_check/chip_ready/chip_good_for_write
powerpc/32: Fix overread/overwrite of thread_struct via ptrace
Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flag
nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling
nfc: st21nfca: fix incorrect validating logic in EVT_TRANSACTION
ata: libata-transport: fix {dma|pio|xfer}_mode sysfs files
cifs: return errors during session setup during reconnects
ALSA: hda/conexant - Fix loopback issue with CX20632
vringh: Fix loop descriptors check in the indirect cases
nodemask: Fix return values to be unsigned
modpost: fix undefined behavior of is_arm_mapping_symbol()
drm/radeon: fix a possible null pointer dereference
Revert "net: af_key: add check for pfkey_broadcast in function pfkey_process"
md: protect md_unregister_thread from reentrancy
serial: msm_serial: disable interrupts in __msm_console_write()
staging: rtl8712: fix uninit-value in r871xu_drv_init()
clocksource/drivers/sp804: Avoid error on multiple instances
misc: rtsx: set NULL intfdata when probe fails
usb: dwc2: gadget: don't reset gadget's driver->bus
USB: hcd-pci: Fully suspend across freeze/thaw cycle
drivers: usb: host: Fix deadlock in oxu_bus_suspend()
drivers: tty: serial: Fix deadlock in sa1100_set_termios()
USB: host: isp116x: check return value after calling platform_get_resource()
drivers: staging: rtl8192e: Fix deadlock in rtllib_beacons_stop()
tty: Fix a possible resource leak in icom_probe
tty: synclink_gt: Fix null-pointer-dereference in slgt_clean()
lkdtm/usercopy: Expand size of "out of frame" object
iio: dummy: iio_simple_dummy: check the return value of kstrdup()
net: altera: Fix refcount leak in altera_tse_mdio_create
net: xfrm: unexport __init-annotated xfrm4_protocol_init()
SUNRPC: Fix the calculation of xdr->end in xdr_get_next_encode_buffer()
net/mlx4_en: Fix wrong return value on ioctl EEPROM query failure
ata: pata_octeon_cf: Fix refcount leak in octeon_cf_probe
net: fix nla_strcmp to handle more then one trailing null character
video: fbdev: pxa3xx-gcu: release the resources correctly in pxa3xx_gcu_probe/remove()
m68knommu: fix undefined reference to `_init_sp'
m68knommu: set ZERO_PAGE() to the allocated zeroed page
i2c: cadence: Increase timeout per message if necessary
tracing: Avoid adding tracer option before update_tracer_options
tcp: tcp_rtx_synack() can be called from process context
jffs2: fix memory leak in jffs2_do_fill_super
modpost: fix removing numeric suffixes
net: ethernet: mtk_eth_soc: out of bounds read in mtk_hwlro_get_fdir_entry()
clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value
firmware: dmi-sysfs: Fix memory leak in dmi_sysfs_register_handle
serial: st-asc: Sanitize CSIZE and correct PARENB for CS7
serial: sh-sci: Don't allow CS5-6
serial: txx9: Don't allow CS5-6
serial: digicolor-usart: Don't allow CS5-6
serial: meson: acquire port->lock in startup()
rtc: mt6397: check return value after calling platform_get_resource()
rpmsg: qcom_smd: Fix irq_of_parse_and_map() return value
pwm: lp3943: Fix duty calculation in case period was clamped
USB: storage: karma: fix rio_karma_init return
usb: usbip: add missing device lock on tweak configuration cmd
usb: usbip: fix a refcount leak in stub_probe()
staging: greybus: codecs: fix type confusion of list iterator variable
pcmcia: db1xxx_ss: restrict to MIPS_DB1XXX boards
netfilter: nf_tables: disallow non-stateful expression in sets earlier
MIPS: IP27: Remove incorrect `cpu_has_fpu' override
RDMA/rxe: Generate a completion for unsupported/invalid opcode
dt-bindings: gpio: altera: correct interrupt-cells
docs/conf.py: Cope with removal of language=None in Sphinx 5.0.0
gma500: fix an incorrect NULL check on list iterator
carl9170: tx: fix an incorrect use of list iterator
ASoC: rt5514: Fix event generation for "DSP Voice Wake Up" control
rtl818x: Prevent using not initialized queues
hugetlb: fix huge_pmd_unshare address update
nodemask.h: fix compilation error with GCC12
iommu/msm: Fix an incorrect NULL check on list iterator
um: Fix out-of-bounds read in LDT setup
um: chan_user: Fix winch_tramp() return value
mac80211: upgrade passive scan to active scan on DFS channels after beacon rx
irqchip: irq-xtensa-mx: fix initial IRQ affinity
irqchip/armada-370-xp: Do not touch Performance Counter Overflow on A375, A38x, A39x
RDMA/hfi1: Fix potential integer multiplication overflow errors
md: fix an incorrect NULL check in md_reload_sb
md: fix an incorrect NULL check in does_sb_need_changing
drm/bridge: analogix_dp: Grab runtime PM reference for DP-AUX
drm/amdgpu/cs: make commands with 0 chunks illegal behaviour.
scsi: ufs: qcom: Add a readl() to make sure ref_clk gets enabled
scsi: dc395x: Fix a missing check on list iterator
ocfs2: dlmfs: fix error handling of user_dlm_destroy_lock
dlm: fix missing lkb refcount handling
dlm: fix plock invalid read
ext4: verify dir block before splitting it
ext4: fix bug_on in ext4_writepages
ext4: fix use-after-free in ext4_rename_dir_prepare
fs-writeback: writeback_sb_inodes：Recalculate 'wrote' according skipped pages
iwlwifi: mvm: fix assert 1F04 upon reconfig
wifi: mac80211: fix use-after-free in chanctx code
iommu/amd: Increase timeout waiting for GA log enablement
video: fbdev: clcdfb: Fix refcount leak in clcdfb_of_vram_setup
Input: sparcspkr - fix refcount leak in bbc_beep_probe
tty: fix deadlock caused by calling printk() under tty_port->lock
powerpc/4xx/cpm: Fix return value of __setup() handler
powerpc/idle: Fix return value of __setup() handler
powerpc/8xx: export 'cpm_setbrg' for modules
drivers/base/node.c: fix compaction sysfs file leak
scsi: fcoe: Fix Wstringop-overflow warnings in fcoe_wwn_from_mac()
mfd: ipaq-micro: Fix error check return value of platform_get_irq()
soc: qcom: smsm: Fix missing of_node_put() in smsm_parse_ipc
soc: qcom: smp2p: Fix missing of_node_put() in smp2p_parse_ipc
rxrpc: Don't try to resend the request if we're receiving the reply
rxrpc: Fix listen() setting the bar too high for the prealloc rings
ASoC: wm2000: fix missing clk_disable_unprepare() on error in wm2000_anc_transition()
sctp: read sk->sk_bound_dev_if once in sctp_rcv()
m68k: math-emu: Fix dependencies of math emulation support
Bluetooth: fix dangling sco_conn and use-after-free in sco_sock_timeout
media: pvrusb2: fix array-index-out-of-bounds in pvr2_i2c_core_init
media: exynos4-is: Change clk_disable to clk_disable_unprepare
regulator: pfuze100: Fix refcount leak in pfuze_parse_regulators_dt
ASoC: mxs-saif: Fix refcount leak in mxs_saif_probe
media: uvcvideo: Fix missing check to determine if element is found in list
drm/msm: return an error pointer in msm_gem_prime_get_sg_table()
x86/mm: Cleanup the control_va_addr_alignment() __setup handler
drm/rockchip: vop: fix possible null-ptr-deref in vop_bind()
drm/msm/hdmi: check return value after calling platform_get_resource_byname()
drm/msm/dsi: fix error checks and return values for DSI xmit functions
x86/pm: Fix false positive kmemleak report in msr_build_context()
inotify: show inotify mask flags in proc fdinfo
ath9k_htc: fix potential out of bounds access with invalid rxstatus->rs_keyix
spi: img-spfi: Fix pm_runtime_get_sync() error checking
HID: hid-led: fix maximum brightness for Dream Cheeky
NFC: NULL out the dev->rfkill to prevent UAF
spi: spi-ti-qspi: Fix return value handling of wait_for_completion_timeout
drm/mediatek: Fix mtk_cec_mask()
x86/delay: Fix the wrong asm constraint in delay_loop()
ASoC: mediatek: Fix error handling in mt8173_max98090_dev_probe
drm: fix EDID struct for old ARM OABI format
macintosh/via-pmu: Fix build failure when CONFIG_INPUT is disabled
powerpc/xics: fix refcount leak in icp_opal_init()
PCI: Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store()
ARM: hisi: Add missing of_node_put after of_find_compatible_node
ARM: dts: exynos: add atmel,24c128 fallback to Samsung EEPROM
ARM: versatile: Add missing of_node_put in dcscb_init
fat: add ratelimit to fat*_ent_bread()
ARM: OMAP1: clock: Fix UART rate reporting algorithm
fs: jfs: fix possible NULL pointer dereference in dbFree()
eth: tg3: silence the GCC 12 array-bounds warning
rxrpc: Return an error to sendmsg if call failed
media: exynos4-is: Fix compile warning
ASoC: rt5645: Fix errorenous cleanup order
nvme-pci: fix a NULL pointer dereference in nvme_alloc_admin_tags
openrisc: start CPU timer early in boot
ipmi:ssif: Check for NULL msg when handling events and messages
dma-debug: change allocation mode from GFP_NOWAIT to GFP_ATIOMIC
ASoC: dapm: Don't fold register value changes into notifications
ipv6: Don't send rs packets to the interface of ARPHRD_TUNNEL
drm/amd/pm: fix the compile warning
scsi: megaraid: Fix error check return value of register_chrdev()
media: cx25821: Fix the warning when removing the module
ath9k: fix QCA9561 PA bias level
drm/amd/pm: fix double free in si_parse_power_table()
ALSA: jack: Access input_dev under mutex
ACPICA: Avoid cache flush inside virtual machines
ipw2x00: Fix potential NULL dereference in libipw_xmit()
b43: Fix assigning negative value to unsigned variable
b43legacy: Fix assigning negative value to unsigned variable
mwifiex: add mutex lock for call in mwifiex_dfs_chan_sw_work_queue
drm/virtio: fix NULL pointer dereference in virtio_gpu_conn_get_modes
btrfs: add "0x" prefix for unsupported optional features
ptrace: Reimplement PTRACE_KILL by always sending SIGKILL
ptrace/xtensa: Replace PT_SINGLESTEP with TIF_SINGLESTEP
USB: new quirk for Dell Gen 2 devices
BACKPORT: psi: Fix uaf issue when psi trigger is destroyed while being polled
Conflicts:
drivers/char/Kconfig
drivers/char/random.c
fs/fat/fatent.c
include/linux/random.h
init/main.c
kernel/cpu.c
lib/Makefile
Change-Id: I06579fa22a0347a0d8d2fa32bd6b7b6b54db626f
|
||
|
Miaohe Lin
|
39642b0fed |
drivers/base/node.c: fix compaction sysfs file leak
[ Upstream commit da63dc84befaa9e6079a0bc363ff0eaa975f9073 ]
Compaction sysfs file is created via compaction_register_node in
register_node. But we forgot to remove it in unregister_node. Thus
compaction sysfs file is leaked. Using compaction_unregister_node to fix
this issue.
Link: https://lkml.kernel.org/r/20220401070905.43679-1-linmiaohe@huawei.com
Fixes:
|
||
|
Sami Tolvanen
|
5dd6087598 |
ANDROID: add Shadow Call Stack accounting
Bug: 112277034 Change-Id: Iec4c5e847a16a2395d31137b36aeaa338f107ec1 Signed-off-by: Sami Tolvanen <samitolvanen@google.com> |
||
|
Fabian Frederick
|
bd721ea73e |
treewide: replace obsolete _refok by __ref
There was only one use of __initdata_refok and __exit_refok
__init_refok was used 46 times against 82 for __ref.
Those definitions are obsolete since commit
|
||
|
Andy Lutomirski
|
d30dd8be06 |
mm: track NR_KERNEL_STACK in KiB instead of number of stacks
Currently, NR_KERNEL_STACK tracks the number of kernel stacks in a zone. This only makes sense if each kernel stack exists entirely in one zone, and allowing vmapped stacks could break this assumption. Since frv has THREAD_SIZE < PAGE_SIZE, we need to track kernel stack allocations in a unit that divides both THREAD_SIZE and PAGE_SIZE on all architectures. Keep it simple and use KiB. Link: http://lkml.kernel.org/r/083c71e642c5fa5f1b6898902e1b2db7b48940d4.1468523549.git.luto@kernel.org Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mel Gorman
|
11fb998986 |
mm: move most file-based accounting to the node
There are now a number of accounting oddities such as mapped file pages being accounted for on the node while the total number of file pages are accounted on the zone. This can be coped with to some extent but it's confusing so this patch moves the relevant file-based accounted. Due to throttling logic in the page allocator for reliable OOM detection, it is still necessary to track dirty and writeback pages on a per-zone basis. [mgorman@techsingularity.net: fix NR_ZONE_WRITE_PENDING accounting] Link: http://lkml.kernel.org/r/1468404004-5085-5-git-send-email-mgorman@techsingularity.net Link: http://lkml.kernel.org/r/1467970510-21195-20-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mel Gorman
|
4b9d0fab71 |
mm: rename NR_ANON_PAGES to NR_ANON_MAPPED
NR_FILE_PAGES is the number of file pages. NR_FILE_MAPPED is the number of mapped file pages. NR_ANON_PAGES is the number of mapped anon pages. This is unhelpful naming as it's easy to confuse NR_FILE_MAPPED and NR_ANON_PAGES for mapped pages. This patch renames NR_ANON_PAGES so we have NR_FILE_PAGES is the number of file pages. NR_FILE_MAPPED is the number of mapped file pages. NR_ANON_MAPPED is the number of mapped anon pages. Link: http://lkml.kernel.org/r/1467970510-21195-19-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mel Gorman
|
50658e2e04 |
mm: move page mapped accounting to the node
Reclaim makes decisions based on the number of pages that are mapped but it's mixing node and zone information. Account NR_FILE_MAPPED and NR_ANON_PAGES pages on the node. Link: http://lkml.kernel.org/r/1467970510-21195-18-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mel Gorman
|
599d0c954f |
mm, vmscan: move LRU lists to node
This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mel Gorman
|
75ef718405 |
mm, vmstat: add infrastructure for per-node vmstats
Patchset: "Move LRU page reclaim from zones to nodes v9"
This series moves LRUs from the zones to the node. While this is a
current rebase, the test results were based on mmotm as of June 23rd.
Conceptually, this series is simple but there are a lot of details.
Some of the broad motivations for this are;
1. The residency of a page partially depends on what zone the page was
allocated from. This is partially combatted by the fair zone allocation
policy but that is a partial solution that introduces overhead in the
page allocator paths.
2. Currently, reclaim on node 0 behaves slightly different to node 1. For
example, direct reclaim scans in zonelist order and reclaims even if
the zone is over the high watermark regardless of the age of pages
in that LRU. Kswapd on the other hand starts reclaim on the highest
unbalanced zone. A difference in distribution of file/anon pages due
to when they were allocated results can result in a difference in
again. While the fair zone allocation policy mitigates some of the
problems here, the page reclaim results on a multi-zone node will
always be different to a single-zone node.
it was scheduled on as a result.
3. kswapd and the page allocator scan zones in the opposite order to
avoid interfering with each other but it's sensitive to timing. This
mitigates the page allocator using pages that were allocated very recently
in the ideal case but it's sensitive to timing. When kswapd is allocating
from lower zones then it's great but during the rebalancing of the highest
zone, the page allocator and kswapd interfere with each other. It's worse
if the highest zone is small and difficult to balance.
4. slab shrinkers are node-based which makes it harder to identify the exact
relationship between slab reclaim and LRU reclaim.
The reason we have zone-based reclaim is that we used to have
large highmem zones in common configurations and it was necessary
to quickly find ZONE_NORMAL pages for reclaim. Today, this is much
less of a concern as machines with lots of memory will (or should) use
64-bit kernels. Combinations of 32-bit hardware and 64-bit hardware are
rare. Machines that do use highmem should have relatively low highmem:lowmem
ratios than we worried about in the past.
Conceptually, moving to node LRUs should be easier to understand. The
page allocator plays fewer tricks to game reclaim and reclaim behaves
similarly on all nodes.
The series has been tested on a 16 core UMA machine and a 2-socket 48
core NUMA machine. The UMA results are presented in most cases as the NUMA
machine behaved similarly.
pagealloc
---------
This is a microbenchmark that shows the benefit of removing the fair zone
allocation policy. It was tested uip to order-4 but only orders 0 and 1 are
shown as the other orders were comparable.
4.7.0-rc4 4.7.0-rc4
mmotm-20160623 nodelru-v9
Min total-odr0-1 490.00 ( 0.00%) 457.00 ( 6.73%)
Min total-odr0-2 347.00 ( 0.00%) 329.00 ( 5.19%)
Min total-odr0-4 288.00 ( 0.00%) 273.00 ( 5.21%)
Min total-odr0-8 251.00 ( 0.00%) 239.00 ( 4.78%)
Min total-odr0-16 234.00 ( 0.00%) 222.00 ( 5.13%)
Min total-odr0-32 223.00 ( 0.00%) 211.00 ( 5.38%)
Min total-odr0-64 217.00 ( 0.00%) 208.00 ( 4.15%)
Min total-odr0-128 214.00 ( 0.00%) 204.00 ( 4.67%)
Min total-odr0-256 250.00 ( 0.00%) 230.00 ( 8.00%)
Min total-odr0-512 271.00 ( 0.00%) 269.00 ( 0.74%)
Min total-odr0-1024 291.00 ( 0.00%) 282.00 ( 3.09%)
Min total-odr0-2048 303.00 ( 0.00%) 296.00 ( 2.31%)
Min total-odr0-4096 311.00 ( 0.00%) 309.00 ( 0.64%)
Min total-odr0-8192 316.00 ( 0.00%) 314.00 ( 0.63%)
Min total-odr0-16384 317.00 ( 0.00%) 315.00 ( 0.63%)
Min total-odr1-1 742.00 ( 0.00%) 712.00 ( 4.04%)
Min total-odr1-2 562.00 ( 0.00%) 530.00 ( 5.69%)
Min total-odr1-4 457.00 ( 0.00%) 433.00 ( 5.25%)
Min total-odr1-8 411.00 ( 0.00%) 381.00 ( 7.30%)
Min total-odr1-16 381.00 ( 0.00%) 356.00 ( 6.56%)
Min total-odr1-32 372.00 ( 0.00%) 346.00 ( 6.99%)
Min total-odr1-64 372.00 ( 0.00%) 343.00 ( 7.80%)
Min total-odr1-128 375.00 ( 0.00%) 351.00 ( 6.40%)
Min total-odr1-256 379.00 ( 0.00%) 351.00 ( 7.39%)
Min total-odr1-512 385.00 ( 0.00%) 355.00 ( 7.79%)
Min total-odr1-1024 386.00 ( 0.00%) 358.00 ( 7.25%)
Min total-odr1-2048 390.00 ( 0.00%) 362.00 ( 7.18%)
Min total-odr1-4096 390.00 ( 0.00%) 362.00 ( 7.18%)
Min total-odr1-8192 388.00 ( 0.00%) 363.00 ( 6.44%)
This shows a steady improvement throughout. The primary benefit is from
reduced system CPU usage which is obvious from the overall times;
4.7.0-rc4 4.7.0-rc4
mmotm-20160623nodelru-v8
User 189.19 191.80
System 2604.45 2533.56
Elapsed 2855.30 2786.39
The vmstats also showed that the fair zone allocation policy was definitely
removed as can be seen here;
4.7.0-rc3 4.7.0-rc3
mmotm-20160623 nodelru-v8
DMA32 allocs 28794729769 0
Normal allocs 48432501431 77227309877
Movable allocs 0 0
tiobench on ext4
----------------
tiobench is a benchmark that artifically benefits if old pages remain resident
while new pages get reclaimed. The fair zone allocation policy mitigates this
problem so pages age fairly. While the benchmark has problems, it is important
that tiobench performance remains constant as it implies that page aging
problems that the fair zone allocation policy fixes are not re-introduced.
4.7.0-rc4 4.7.0-rc4
mmotm-20160623 nodelru-v9
Min PotentialReadSpeed 89.65 ( 0.00%) 90.21 ( 0.62%)
Min SeqRead-MB/sec-1 82.68 ( 0.00%) 82.01 ( -0.81%)
Min SeqRead-MB/sec-2 72.76 ( 0.00%) 72.07 ( -0.95%)
Min SeqRead-MB/sec-4 75.13 ( 0.00%) 74.92 ( -0.28%)
Min SeqRead-MB/sec-8 64.91 ( 0.00%) 65.19 ( 0.43%)
Min SeqRead-MB/sec-16 62.24 ( 0.00%) 62.22 ( -0.03%)
Min RandRead-MB/sec-1 0.88 ( 0.00%) 0.88 ( 0.00%)
Min RandRead-MB/sec-2 0.95 ( 0.00%) 0.92 ( -3.16%)
Min RandRead-MB/sec-4 1.43 ( 0.00%) 1.34 ( -6.29%)
Min RandRead-MB/sec-8 1.61 ( 0.00%) 1.60 ( -0.62%)
Min RandRead-MB/sec-16 1.80 ( 0.00%) 1.90 ( 5.56%)
Min SeqWrite-MB/sec-1 76.41 ( 0.00%) 76.85 ( 0.58%)
Min SeqWrite-MB/sec-2 74.11 ( 0.00%) 73.54 ( -0.77%)
Min SeqWrite-MB/sec-4 80.05 ( 0.00%) 80.13 ( 0.10%)
Min SeqWrite-MB/sec-8 72.88 ( 0.00%) 73.20 ( 0.44%)
Min SeqWrite-MB/sec-16 75.91 ( 0.00%) 76.44 ( 0.70%)
Min RandWrite-MB/sec-1 1.18 ( 0.00%) 1.14 ( -3.39%)
Min RandWrite-MB/sec-2 1.02 ( 0.00%) 1.03 ( 0.98%)
Min RandWrite-MB/sec-4 1.05 ( 0.00%) 0.98 ( -6.67%)
Min RandWrite-MB/sec-8 0.89 ( 0.00%) 0.92 ( 3.37%)
Min RandWrite-MB/sec-16 0.92 ( 0.00%) 0.93 ( 1.09%)
4.7.0-rc4 4.7.0-rc4
mmotm-20160623 approx-v9
User 645.72 525.90
System 403.85 331.75
Elapsed 6795.36 6783.67
This shows that the series has little or not impact on tiobench which is
desirable and a reduction in system CPU usage. It indicates that the fair
zone allocation policy was removed in a manner that didn't reintroduce
one class of page aging bug. There were only minor differences in overall
reclaim activity
4.7.0-rc4 4.7.0-rc4
mmotm-20160623nodelru-v8
Minor Faults 645838 647465
Major Faults 573 640
Swap Ins 0 0
Swap Outs 0 0
DMA allocs 0 0
DMA32 allocs 46041453 44190646
Normal allocs 78053072 79887245
Movable allocs 0 0
Allocation stalls 24 67
Stall zone DMA 0 0
Stall zone DMA32 0 0
Stall zone Normal 0 2
Stall zone HighMem 0 0
Stall zone Movable 0 65
Direct pages scanned 10969 30609
Kswapd pages scanned 93375144 93492094
Kswapd pages reclaimed 93372243 93489370
Direct pages reclaimed 10969 30609
Kswapd efficiency 99% 99%
Kswapd velocity 13741.015 13781.934
Direct efficiency 100% 100%
Direct velocity 1.614 4.512
Percentage direct scans 0% 0%
kswapd activity was roughly comparable. There were differences in direct
reclaim activity but negligible in the context of the overall workload
(velocity of 4 pages per second with the patches applied, 1.6 pages per
second in the baseline kernel).
pgbench read-only large configuration on ext4
---------------------------------------------
pgbench is a database benchmark that can be sensitive to page reclaim
decisions. This also checks if removing the fair zone allocation policy
is safe
pgbench Transactions
4.7.0-rc4 4.7.0-rc4
mmotm-20160623 nodelru-v8
Hmean 1 188.26 ( 0.00%) 189.78 ( 0.81%)
Hmean 5 330.66 ( 0.00%) 328.69 ( -0.59%)
Hmean 12 370.32 ( 0.00%) 380.72 ( 2.81%)
Hmean 21 368.89 ( 0.00%) 369.00 ( 0.03%)
Hmean 30 382.14 ( 0.00%) 360.89 ( -5.56%)
Hmean 32 428.87 ( 0.00%) 432.96 ( 0.95%)
Negligible differences again. As with tiobench, overall reclaim activity
was comparable.
bonnie++ on ext4
----------------
No interesting performance difference, negligible differences on reclaim
stats.
paralleldd on ext4
------------------
This workload uses varying numbers of dd instances to read large amounts of
data from disk.
4.7.0-rc3 4.7.0-rc3
mmotm-20160623 nodelru-v9
Amean Elapsd-1 186.04 ( 0.00%) 189.41 ( -1.82%)
Amean Elapsd-3 192.27 ( 0.00%) 191.38 ( 0.46%)
Amean Elapsd-5 185.21 ( 0.00%) 182.75 ( 1.33%)
Amean Elapsd-7 183.71 ( 0.00%) 182.11 ( 0.87%)
Amean Elapsd-12 180.96 ( 0.00%) 181.58 ( -0.35%)
Amean Elapsd-16 181.36 ( 0.00%) 183.72 ( -1.30%)
4.7.0-rc4 4.7.0-rc4
mmotm-20160623 nodelru-v9
User 1548.01 1552.44
System 8609.71 8515.08
Elapsed 3587.10 3594.54
There is little or no change in performance but some drop in system CPU usage.
4.7.0-rc3 4.7.0-rc3
mmotm-20160623 nodelru-v9
Minor Faults 362662 367360
Major Faults 1204 1143
Swap Ins 22 0
Swap Outs 2855 1029
DMA allocs 0 0
DMA32 allocs 31409797 28837521
Normal allocs 46611853 49231282
Movable allocs 0 0
Direct pages scanned 0 0
Kswapd pages scanned 40845270 40869088
Kswapd pages reclaimed 40830976 40855294
Direct pages reclaimed 0 0
Kswapd efficiency 99% 99%
Kswapd velocity 11386.711 11369.769
Direct efficiency 100% 100%
Direct velocity 0.000 0.000
Percentage direct scans 0% 0%
Page writes by reclaim 2855 1029
Page writes file 0 0
Page writes anon 2855 1029
Page reclaim immediate 771 1628
Sector Reads 293312636 293536360
Sector Writes 18213568 18186480
Page rescued immediate 0 0
Slabs scanned 128257 132747
Direct inode steals 181 56
Kswapd inode steals 59 1131
It basically shows that kswapd was active at roughly the same rate in
both kernels. There was also comparable slab scanning activity and direct
reclaim was avoided in both cases. There appears to be a large difference
in numbers of inodes reclaimed but the workload has few active inodes and
is likely a timing artifact.
stutter
-------
stutter simulates a simple workload. One part uses a lot of anonymous
memory, a second measures mmap latency and a third copies a large file.
The primary metric is checking for mmap latency.
stutter
4.7.0-rc4 4.7.0-rc4
mmotm-20160623 nodelru-v8
Min mmap 16.6283 ( 0.00%) 13.4258 ( 19.26%)
1st-qrtle mmap 54.7570 ( 0.00%) 34.9121 ( 36.24%)
2nd-qrtle mmap 57.3163 ( 0.00%) 46.1147 ( 19.54%)
3rd-qrtle mmap 58.9976 ( 0.00%) 47.1882 ( 20.02%)
Max-90% mmap 59.7433 ( 0.00%) 47.4453 ( 20.58%)
Max-93% mmap 60.1298 ( 0.00%) 47.6037 ( 20.83%)
Max-95% mmap 73.4112 ( 0.00%) 82.8719 (-12.89%)
Max-99% mmap 92.8542 ( 0.00%) 88.8870 ( 4.27%)
Max mmap 1440.6569 ( 0.00%) 121.4201 ( 91.57%)
Mean mmap 59.3493 ( 0.00%) 42.2991 ( 28.73%)
Best99%Mean mmap 57.2121 ( 0.00%) 41.8207 ( 26.90%)
Best95%Mean mmap 55.9113 ( 0.00%) 39.9620 ( 28.53%)
Best90%Mean mmap 55.6199 ( 0.00%) 39.3124 ( 29.32%)
Best50%Mean mmap 53.2183 ( 0.00%) 33.1307 ( 37.75%)
Best10%Mean mmap 45.9842 ( 0.00%) 20.4040 ( 55.63%)
Best5%Mean mmap 43.2256 ( 0.00%) 17.9654 ( 58.44%)
Best1%Mean mmap 32.9388 ( 0.00%) 16.6875 ( 49.34%)
This shows a number of improvements with the worst-case outlier greatly
improved.
Some of the vmstats are interesting
4.7.0-rc4 4.7.0-rc4
mmotm-20160623nodelru-v8
Swap Ins 163 502
Swap Outs 0 0
DMA allocs 0 0
DMA32 allocs 618719206 1381662383
Normal allocs 891235743 564138421
Movable allocs 0 0
Allocation stalls 2603 1
Direct pages scanned 216787 2
Kswapd pages scanned 50719775 41778378
Kswapd pages reclaimed 41541765 41777639
Direct pages reclaimed 209159 0
Kswapd efficiency 81% 99%
Kswapd velocity 16859.554 14329.059
Direct efficiency 96% 0%
Direct velocity 72.061 0.001
Percentage direct scans 0% 0%
Page writes by reclaim 6215049 0
Page writes file 6215049 0
Page writes anon 0 0
Page reclaim immediate 70673 90
Sector Reads 81940800 81680456
Sector Writes 100158984 98816036
Page rescued immediate 0 0
Slabs scanned 1366954 22683
While this is not guaranteed in all cases, this particular test showed
a large reduction in direct reclaim activity. It's also worth noting
that no page writes were issued from reclaim context.
This series is not without its hazards. There are at least three areas
that I'm concerned with even though I could not reproduce any problems in
that area.
1. Reclaim/compaction is going to be affected because the amount of reclaim is
no longer targetted at a specific zone. Compaction works on a per-zone basis
so there is no guarantee that reclaiming a few THP's worth page pages will
have a positive impact on compaction success rates.
2. The Slab/LRU reclaim ratio is affected because the frequency the shrinkers
are called is now different. This may or may not be a problem but if it
is, it'll be because shrinkers are not called enough and some balancing
is required.
3. The anon/file reclaim ratio may be affected. Pages about to be dirtied are
distributed between zones and the fair zone allocation policy used to do
something very similar for anon. The distribution is now different but not
necessarily in any way that matters but it's still worth bearing in mind.
VM statistic counters for reclaim decisions are zone-based. If the kernel
is to reclaim on a per-node basis then we need to track per-node
statistics but there is no infrastructure for that. The most notable
change is that the old node_page_state is renamed to
sum_zone_node_page_state. The new node_page_state takes a pglist_data and
uses per-node stats but none exist yet. There is some renaming such as
vm_stat to vm_zone_stat and the addition of vm_node_stat and the renaming
of mod_state to mod_zone_state. Otherwise, this is mostly a mechanical
patch with no functional change. There is a lot of similarity between the
node and zone helpers which is unfortunate but there was no obvious way of
reusing the code and maintaining type safety.
Link: http://lkml.kernel.org/r/1467970510-21195-2-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Kirill A. Shutemov
|
65c453778a |
mm, rmap: account shmem thp pages
Let's add ShmemHugePages and ShmemPmdMapped fields into meminfo and smaps. It indicates how many times we allocate and map shmem THP. NR_ANON_TRANSPARENT_HUGEPAGES is renamed to NR_ANON_THPS. Link: http://lkml.kernel.org/r/1466021202-61880-27-git-send-email-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Yinghai Lu
|
04697858d8 |
mm: check if section present during memory block registering
Tony Luck found on his setup, if memory block size 512M will cause crash during booting. BUG: unable to handle kernel paging request at ffffea0074000020 IP: get_nid_for_pfn+0x17/0x40 PGD 128ffcb067 PUD 128ffc9067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.2.0-rc8 #1 ... Call Trace: ? register_mem_sect_under_node+0x66/0xe0 register_one_node+0x17b/0x240 ? pci_iommu_alloc+0x6e/0x6e topology_init+0x3c/0x95 do_one_initcall+0xcd/0x1f0 The system has non continuous RAM address: BIOS-e820: [mem 0x0000001300000000-0x0000001cffffffff] usable BIOS-e820: [mem 0x0000001d70000000-0x0000001ec7ffefff] usable BIOS-e820: [mem 0x0000001f00000000-0x0000002bffffffff] usable BIOS-e820: [mem 0x0000002c18000000-0x0000002d6fffefff] usable BIOS-e820: [mem 0x0000002e00000000-0x00000039ffffffff] usable So there are start sections in memory block not present. For example: memory block : [0x2c18000000, 0x2c20000000) 512M first three sections are not present. The current register_mem_sect_under_node() assume first section is present, but memory block section number range [start_section_nr, end_section_nr] would include not present section. For arch that support vmemmap, we don't setup memmap for struct page area within not present sections area. So skip the pfn range that belong to absent section. [akpm@linux-foundation.org: simplification] [rientjes@google.com: more simplification] Fixes: |
||
|
Mel Gorman
|
3a80a7fa79 |
mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set
This patch initalises all low memory struct pages and 2G of the highest zone on each node during memory initialisation if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set. That config option cannot be set but will be available in a later patch. Parallel initialisation of struct page depends on some features from memory hotplug and it is necessary to alter alter section annotations. Signed-off-by: Mel Gorman <mgorman@suse.de> Tested-by: Nate Zimmer <nzimmer@sgi.com> Tested-by: Waiman Long <waiman.long@hp.com> Tested-by: Daniel J Blueman <daniel@numascale.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Robin Holt <robinmholt@gmail.com> Cc: Nate Zimmer <nzimmer@sgi.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Waiman Long <waiman.long@hp.com> Cc: Scott Norton <scott.norton@hp.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Ana Nedelcu
|
518d3f38ab |
drivers: base: node: Delete space after pointer declaration
This patch fixes the following error found by checkpatch.pl: ERROR: "foo * bar" should be "foo *bar" Signed-off-by: Ana Nedelcu <anafnedelcu@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
7ca7ec40f4 |
drivers/base/node: clean up attribute group conversion
We can use the ATTRIBUTE_GROUPS() macro here, so use it, saving some lines of code. Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org |
||
|
Takashi Iwai
|
3c9b8aaf95 |
drivers/base/node: Avoid manual device_create_file() calls
Instead of manual calls of multiple device_create_file() and device_remove_file(), use the static attribute groups assigned to the new device. This also fixes the possible races, too. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Tejun Heo
|
f799b1a7fb |
drivers/base: use %*pb[l] to print bitmaps including cpumasks and nodemasks
printk and friends can now format bitmaps using '%*pb[l]'. cpumask and nodemask also provide cpumask_pr_args() and nodemask_pr_args() respectively which can be used to generate the two printf arguments necessary to format the specified cpu/nodemask. * Line termination only requires one extra space at the end of the buffer. Use PAGE_SIZE - 1 instead of PAGE_SIZE - 2 when formatting. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Sudeep Holla
|
5aaba36318 |
cpumask: factor out show_cpumap into separate helper function
Many sysfs *_show function use cpu{list,mask}_scnprintf to copy cpumap
to the buffer aligned to PAGE_SIZE, append '\n' and '\0' to return null
terminated buffer with newline.
This patch creates a new helper function cpumap_print_to_pagebuf in
cpumask.h using newly added bitmap_print_to_pagebuf and consolidates
most of those sysfs functions using the new helper function.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Tested-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: x86@kernel.org
Cc: linux-acpi@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
||
|
Johannes Weiner
|
1f13ae399c |
mm: remove noisy remainder of the scan_unevictable interface
The deprecation warnings for the scan_unevictable interface triggers by
scripts doing `sysctl -a | grep something else'. This is annoying and not
helpful.
The interface has been defunct since
|
||
|
Yasuaki Ishimatsu
|
33ead538f6 |
driver/base/node: remove unnecessary kfree of node struct from unregister_one_node
Commit |
||
|
Rafael Aquini
|
cc7452b6dc |
mm: export NR_SHMEM via sysinfo(2) / si_meminfo() interfaces
Historically, we exported shared pages to userspace via sysinfo(2) sharedram and /proc/meminfo's "MemShared" fields. With the advent of tmpfs, from kernel v2.4 onward, that old way for accounting shared mem was deemed inaccurate and we started to export a hard-coded 0 for sysinfo.sharedram. Later on, during the 2.6 timeframe, "MemShared" got re-introduced to /proc/meminfo re-branded as "Shmem", but we're still reporting sysinfo.sharedmem as that old hard-coded zero, which makes the "shared memory" report inconsistent across interfaces. This patch leverages the addition of explicit accounting for pages used by shmem/tmpfs -- "4b02108 mm: oom analysis: add shmem vmstat" -- in order to make the users of sysinfo(2) and si_meminfo*() friends aware of that vmstat entry and make them report it consistently across the interfaces, as well to make sysinfo(2) returned data consistent with our current API documentation states. Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Xishi Qiu
|
92d585ef06 |
numa: fix NULL pointer access and memory leak in unregister_one_node()
When doing socket hot remove, "node_devices[nid]" is set to NULL; acpi_processor_remove() try_offline_node() unregister_one_node() Then hot add a socket, but do not echo 1 > /sys/devices/system/cpu/cpuXX/online, so register_one_node() will not be called, and "node_devices[nid]" is still NULL. If doing socket hot remove again, NULL pointer access will be happen. unregister_one_node() unregister_node() Another, we should free the memory used by "node_devices[nid]" in unregister_one_node(). Signed-off-by: Xishi Qiu <qiuxishi@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Kirill A. Shutemov
|
3cd14fcd3f |
thp: account anon transparent huge pages into NR_ANON_PAGES
We use NR_ANON_PAGES as base for reporting AnonPages to user. There's not much sense in not accounting transparent huge pages there, but add them on printing to user. Let's account transparent huge pages in NR_ANON_PAGES in the first place. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Hugh Dickins <hughd@google.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Andi Kleen <ak@linux.intel.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Hillf Danton <dhillf@gmail.com> Cc: Ning Qu <quning@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Andrew Morton
|
6e259e7dc4 |
drivers/base/node.c: switch to register_hotmemory_notifier()
Squishes a warning which my change to hotplug_memory_notifier() added. I want to keep that warning, because it is punishment for failnig to check the hotplug_memory_notifier() return value. Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Lai Jiangshan
|
20b2f52b73 |
numa: add CONFIG_MOVABLE_NODE for movable-dedicated node
We need a node which only contains movable memory. This feature is very important for node hotplug. If a node has normal/highmem, the memory may be used by the kernel and can't be offlined. If the node only contains movable memory, we can offline the memory and the node. All are prepared, we can actually introduce N_MEMORY. add CONFIG_MOVABLE_NODE make we can use it for movable-dedicated node [akpm@linux-foundation.org: fix Kconfig text] Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Tested-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Mel Gorman <mgorman@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Lai Jiangshan
|
8cebfcd074 |
hugetlb: use N_MEMORY instead N_HIGH_MEMORY
N_HIGH_MEMORY stands for the nodes that has normal or high memory. N_MEMORY stands for the nodes that has any memory. The code here need to handle with the nodes which have memory, we should use N_MEMORY instead. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by: Hillf Danton <dhillf@gmail.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Cc: Christoph Lameter <cl@linux.com> Cc: Hillf Danton <dhillf@gmail.com> Cc: Lin Feng <linfeng@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Lai Jiangshan
|
fcf07d22f0 |
drivers/base/node.c: cleanup node_state_attr[]
use [index] = init_value use N_xxxxx instead of hardcode. Make it more readability and easier to add new state. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Yasuaki Ishimatsu
|
fa26437517 |
mm: cleanup register_node()
register_node() is defined as extern in include/linux/node.h. But the function is only called from register_one_node() in driver/base/node.c. So the patch defines register_node() as static. Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Yasuaki Ishimatsu
|
8c7b5b4ed9 |
memory-hotplug: suppress "Device nodeX does not have a release() function" warning
When calling unregister_node(), the function shows following message at device_release(). "Device 'node2' does not have a release() function, it is broken and must be fixed." The reason is node's device struct does not have a release() function. So the patch registers node_device_release() to the device's release() function for suppressing the warning message. Additionally, the patch adds memset() to initialize a node struct into register_node(). Because the node struct is part of node_devices[] array and it cannot be freed by node_device_release(). So if system reuses the node struct, it has a garbage. Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Wen Congyang
|
8732794b16 |
numa: convert static memory to dynamically allocated memory for per node device
We use a static array to store struct node. In many cases, we don't have too many nodes, and some memory will be unused. Convert it to per-device dynamically allocated memory. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Ryota Ozaki
|
f623881872 |
mm: fix off-by-one bug in print_nodes_state()
/sys/devices/system/node/{online,possible} outputs a garbage byte
because print_nodes_state() returns content size + 1. To fix the bug,
the patch changes the use of cpuset_sprintf_cpulist to follow the use at
other places, which is clearer and safer.
This bug was introduced in v2.6.24 (commit
|
||
|
Yinghai Lu
|
321bf4ed5f |
drivers/base/memory.c: fix memory_dev_init() long delay
One system with 2048g ram, reported soft lockup on recent kernel. [ 34.426749] cpu_dev_init done [ 61.166399] BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:1] [ 61.166733] Modules linked in: [ 61.166904] irq event stamp: 1935610 [ 61.178431] hardirqs last enabled at (1935609): [<ffffffff81ce8c05>] mutex_lock_nested+0x299/0x2b4 [ 61.178923] hardirqs last disabled at (1935610): [<ffffffff81cf2bab>] apic_timer_interrupt+0x6b/0x80 [ 61.198767] softirqs last enabled at (1935476): [<ffffffff8106e59c>] __do_softirq+0x195/0x1ab [ 61.218604] softirqs last disabled at (1935471): [<ffffffff81cf359c>] call_softirq+0x1c/0x30 [ 61.238408] CPU 0 [ 61.238549] Modules linked in: [ 61.238744] [ 61.238825] Pid: 1, comm: swapper/0 Not tainted 3.3.0-rc1-tip-yh-02076-g962f689-dirty #171 [ 61.278212] RIP: 0010:[<ffffffff810b3e3a>] [<ffffffff810b3e3a>] lock_release+0x90/0x9c [ 61.278627] RSP: 0018:ffff883f64dbfd70 EFLAGS: 00000246 [ 61.298287] RAX: ffff883f64dc0000 RBX: 0000000000000000 RCX: 000000000000008b [ 61.298690] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 61.318383] RBP: ffff883f64dbfda0 R08: 0000000000000001 R09: 000000000000008b [ 61.338215] R10: 0000000000000000 R11: 0000000000000000 R12: ffff883f64dbfd10 [ 61.338610] R13: ffff883f64dc0708 R14: ffff883f64dc0708 R15: ffffffff81095657 [ 61.358299] FS: 0000000000000000(0000) GS:ffff883f7d600000(0000) knlGS:0000000000000000 [ 61.378118] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 61.378450] CR2: 0000000000000000 CR3: 00000000024af000 CR4: 00000000000007f0 [ 61.398144] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 61.417918] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 61.418260] Process swapper/0 (pid: 1, threadinfo ffff883f64dbe000, task ffff883f64dc0000) [ 61.445358] Stack: [ 61.445511] 0000000000000002 ffff897f649ba168 ffff883f64dbfe10 ffff88ff64bb57a8 [ 61.458040] 0000000000000000 0000000000000000 ffff883f64dbfdc0 ffffffff81ceb1b4 [ 61.458491] 000000000011608c ffff88ff64bb58a8 ffff883f64dbfdf0 ffffffff81c57638 [ 61.478215] Call Trace: [ 61.478367] [<ffffffff81ceb1b4>] _raw_spin_unlock+0x21/0x2e [ 61.497994] [<ffffffff81c57638>] klist_next+0x9e/0xbc [ 61.498264] [<ffffffff8148ba99>] next_device+0xe/0x1e [ 61.517867] [<ffffffff8148c0cc>] subsys_find_device_by_id+0xb7/0xd6 [ 61.518197] [<ffffffff81498846>] find_memory_block_hinted+0x3d/0x66 [ 61.537927] [<ffffffff8149887f>] find_memory_block+0x10/0x12 [ 61.538193] [<ffffffff814988b6>] add_memory_section+0x35/0x9e [ 61.557932] [<ffffffff827fecef>] memory_dev_init+0x68/0xda [ 61.558227] [<ffffffff827fec01>] driver_init+0x97/0xa7 [ 61.577853] [<ffffffff827cdf3c>] kernel_init+0xf6/0x1c0 [ 61.578140] [<ffffffff81cf34a4>] kernel_thread_helper+0x4/0x10 [ 61.597850] [<ffffffff81ceb59d>] ? retint_restore_args+0xe/0xe [ 61.598144] [<ffffffff827cde46>] ? start_kernel+0x3ab/0x3ab [ 61.617826] [<ffffffff81cf34a0>] ? gs_change+0xb/0xb [ 61.618060] Code: 10 48 83 3b 00 eb e8 4c 89 f2 44 89 fe 4c 89 ef e8 e1 fe ff ff 65 48 8b 04 25 40 bc 00 00 c7 80 cc 06 00 00 00 00 00 00 41 54 9d <5e> 5b 41 5c 41 5d 41 5e 41 5f 5d c3 55 48 89 e5 41 57 41 89 cf [ 89.285380] memory_dev_init done Finally it takes about 55s to create 16400 memory entries. Root cause: for x86_64, 2048g (with 2g hole at [2g,4g), and TOP2 will be 2050g), will have 16400 memory block. find_memory_block/subsys_find_device_by_id will be expensive with that many entries. Actually, we don't need to find that memory block for BOOT path. Skip that finding make it get back to normal. [ 34.466696] cpu_dev_init done [ 35.290080] memory_dev_init done Also solved the delay with topology_init when sections_per_block is not 1. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Nathan Fontenot <nfont@austin.ibm.com> Cc: Robin Holt <holt@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Greg Kroah-Hartman
|
ff4b8a57f0 |
Merge branch 'driver-core-next' into Linux 3.2
This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file, and it fixes the build error in the arch/x86/kernel/microcode_core.c file, that the merge did not catch. The microcode_core.c patch was provided by Stephen Rothwell <sfr@canb.auug.org.au> who was invaluable in the merge issues involved with the large sysdev removal process in the driver-core tree. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> |
||
|
Kay Sievers
|
10fbcf4c6c |
convert 'memory' sysdev_class to a regular subsystem
This moves the 'memory sysdev_class' over to a regular 'memory' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> |
||
|
Kay Sievers
|
8a25a2fd12 |
cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem
This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> |
||
|
Claudio Scordino
|
91a13c281d |
drivers/base/node.c: fix compilation error with older versions of gcc
Patch to fix the error message "directives may not be used inside a macro argument" which appears when the kernel is compiled for the cris architecture. Signed-off-by: Claudio Scordino <claudio@evidence.eu.com> Acked-by: David Rientjes <rientjes@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> |
||
|
KOSAKI Motohiro
|
fa25c503df |
mm: per-node vmstat: show proper vmstats
commit
|
||
|
Nathan Fontenot
|
d33601644c |
memory hotplug: Update phys_index to [start|end]_section_nr
Update the 'phys_index' property of a the memory_block struct to be called start_section_nr, and add a end_section_nr property. The data tracked here is the same but the updated naming is more in line with what is stored here, namely the first and last section number that the memory block spans. The names presented to userspace remain the same, phys_index for start_section_nr and end_phys_index for end_section_nr, to avoid breaking anything in userspace. This also updates the node sysfs code to be aware of the new capability for a memory block to contain multiple memory sections and be aware of the memory block structure name changes (start_section_nr). This requires an additional parameter to unregister_mem_sect_under_nodes so that we know which memory section of the memory block to unregister. Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com> Reviewed-by: Robin Holt <holt@sgi.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> |
||
|
David Rientjes
|
05b258e997 |
thp: transparent hugepage sysfs meminfo
Add hugepage statistics to per-node sysfs meminfo Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Michael Rubin
|
2ac390370a |
writeback: add /sys/devices/system/node/<node>/vmstat
For NUMA node systems it is important to have visibility in memory characteristics. Two of the /proc/vmstat values "nr_written" and "nr_dirtied" are added here. # cat /sys/devices/system/node/node20/vmstat nr_written 0 nr_dirtied 0 Signed-off-by: Michael Rubin <mrubin@google.com> Reviewed-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Robin Holt
|
63d027a638 |
driver core: Convert link_mem_sections to use find_memory_block_hinted.
Modify link_mem_sections() to pass in the previous mem_block as a hint to locating the next mem_block. Since they are typically added in order this results in a massive saving in time during boot of a very large system. For example, on a 16TB x86_64 machine, it reduced the total time spent linking all node's memory sections from 1 hour, 27 minutes to 46 seconds. Signed-off-by: Robin Holt <holt@sgi.com> To: Gary Hade <garyhade@us.ibm.com> To: Badari Pulavarty <pbadari@us.ibm.com> To: Ingo Molnar <mingo@elte.hu> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> |
||
|
KOSAKI Motohiro
|
7ee9225547 |
drivers/base/node.c: reduce stack usage of node_read_meminfo()
drivers/base/node.c: In function 'node_read_meminfo': drivers/base/node.c:139: warning: the frame size of 848 bytes is larger than 512 bytes Fix it by splitting the sprintf() into three parts. It has no functional change. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mel Gorman
|
ed4a6d7f06 |
mm: compaction: add /sys trigger for per-node memory compaction
Add a per-node sysfs file called compact. When the file is written to, each zone in that node is compacted. The intention that this would be used by something like a job scheduler in a batch system before a job starts so that the job can allocate the maximum number of hugepages without significant start-up cost. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Rik van Riel <riel@redhat.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Christoph Lameter <cl@linux-foundation.org> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Tejun Heo
|
18e5b539b4 |
nodemask: include slab.h from drivers/base/node.c
NODEMASK_ALLOC/FREE are mapped to kmalloc/free if NODES_SHIFT > 8. Among its several users, drivers/base/node.c wasn't including slab.h leading to build failure if NODES_SHIFT > 8. Include slab.h from drivers/base/node.c. This isn't an ideal solution but including slab.h directly from nodemask.h is not an option because nodemask.h gets included everywhere. For now, make it work by including slab.h from its users. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Ingo Molnar <mingo@elte.hu> |
||
|
Tejun Heo
|
5a0e3ad6af |
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> |
||
|
David Rientjes
|
12ee3c0a0a |
driver core: numa: fix BUILD_BUG_ON for node_read_distance
node_read_distance() has a BUILD_BUG_ON() to prevent buffer overruns when the number of nodes printed will exceed the buffer length. Each node only needs four chars: three for distance (maximum distance is 255) and one for a seperating space or a trailing newline. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> |
||
|
Andi Kleen
|
3701cde6e3 |
sysdev: Use sysdev_class attribute arrays in node driver
Convert the node driver to sysdev_class attribute arrays. This greatly cleans up the code and remove a lot of code. Saves ~150 bytes of code on x86-64. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> |
||
|
Andi Kleen
|
b15f562fc2 |
sysdev: Convert node driver class attributes to be data driven
Using the new attribute argument convert the node driver class attributes to carry the node state. Then use a shared function to do what a lot of individual functions did before. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> |
||
|
Andi Kleen
|
c9be0a36f9 |
sysdev: Pass attribute in sysdev_class attributes show/store
Passing the attribute to the low level IO functions allows all kinds of cleanups, by sharing low level IO code without requiring an own function for every piece of data. Also drivers can extend the attributes with own data fields and use that in the low level function. Similar to sysdev_attributes and normal attributes. This is a tree-wide sweep, converting everything in one go. No functional changes in this patch other than passing the new argument everywhere. Tested on x86, the non x86 parts are uncompiled. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> |
||
|
David Rientjes
|
9ae49fab23 |
mm: slab-allocate memory section nodemask for large systems
Nodemasks should not be allocated on the stack for large systems (when it is larger than 256 bytes) since there is a threat of overflow. This patch causes the unregister_mem_sect_under_nodes() nodemask to be allocated on the stack for smaller systems and be allocated by slab for larger systems. GFP_KERNEL is used since remove_memory_block() can block. Cc: Gary Hade <garyhade@us.ibm.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Alex Chiang <achiang@hp.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |