Commit Graph

208 Commits

Author SHA1 Message Date
Greg Kroah-Hartman
46d5c15467 Merge 4.19.317 into android-4.19-stable
Changes in 4.19.317
	wifi: mac80211: mesh: Fix leak of mesh_preq_queue objects
	wifi: mac80211: Fix deadlock in ieee80211_sta_ps_deliver_wakeup()
	wifi: iwlwifi: mvm: revert gen2 TX A-MPDU size to 64
	wifi: iwlwifi: mvm: don't read past the mfuart notifcation
	ipv6: sr: block BH in seg6_output_core() and seg6_input_core()
	vxlan: Fix regression when dropping packets due to invalid src addresses
	tcp: count CLOSE-WAIT sockets for TCP_MIB_CURRESTAB
	ptp: Fix error message on failed pin verification
	af_unix: Annotate data-race of sk->sk_state in unix_inq_len().
	af_unix: Annotate data-races around sk->sk_state in unix_write_space() and poll().
	af_unix: Annotate data-races around sk->sk_state in sendmsg() and recvmsg().
	af_unix: Annotate data-races around sk->sk_state in UNIX_DIAG.
	af_unix: Annotate data-race of net->unx.sysctl_max_dgram_qlen.
	af_unix: Use unix_recvq_full_lockless() in unix_stream_connect().
	af_unix: Use skb_queue_len_lockless() in sk_diag_show_rqlen().
	af_unix: Annotate data-race of sk->sk_shutdown in sk_diag_fill().
	usb: gadget: f_fs: Fix race between aio_cancel() and AIO request complete
	drm/amd/display: Handle Y carry-over in VCP X.Y calculation
	serial: sc16is7xx: replace hardcoded divisor value with BIT() macro
	serial: sc16is7xx: fix bug in sc16is7xx_set_baud() when using prescaler
	media: mc: mark the media devnode as registered from the, start
	selftests/mm: compaction_test: fix incorrect write of zero to nr_hugepages
	selftests/mm: conform test to TAP format output
	selftests/mm: compaction_test: fix bogus test success on Aarch64
	nilfs2: Remove check for PageError
	nilfs2: return the mapped address from nilfs_get_page()
	nilfs2: fix nilfs_empty_dir() misjudgment and long loop on I/O errors
	USB: class: cdc-wdm: Fix CPU lockup caused by excessive log messages
	mei: me: release irq in mei_me_pci_resume error path
	jfs: xattr: fix buffer overflow for invalid xattr
	xhci: Apply reset resume quirk to Etron EJ188 xHCI host
	xhci: Apply broken streams quirk to Etron EJ188 xHCI host
	Input: try trimming too long modalias strings
	xsk: validate user input for XDP_{UMEM|COMPLETION}_FILL_RING
	HID: core: remove unnecessary WARN_ON() in implement()
	iommu/amd: Fix sysfs leak in iommu init
	liquidio: Adjust a NULL pointer handling path in lio_vf_rep_copy_packet
	drm/bridge/panel: Fix runtime warning on panel bridge release
	tcp: fix race in tcp_v6_syn_recv_sock()
	Bluetooth: L2CAP: Fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ
	ipv6/route: Add a missing check on proc_dointvec
	net/ipv6: Fix the RT cache flush via sysctl using a previous delay
	drivers: core: synchronize really_probe() and dev_uevent()
	drm/exynos/vidi: fix memory leak in .get_modes()
	vmci: prevent speculation leaks by sanitizing event in event_deliver()
	fs/proc: fix softlockup in __read_vmcore
	ocfs2: use coarse time for new created files
	ocfs2: fix races between hole punching and AIO+DIO
	PCI: rockchip-ep: Remove wrong mask on subsys_vendor_id
	dmaengine: axi-dmac: fix possible race in remove()
	intel_th: pci: Add Granite Rapids support
	intel_th: pci: Add Granite Rapids SOC support
	intel_th: pci: Add Sapphire Rapids SOC support
	intel_th: pci: Add Meteor Lake-S support
	intel_th: pci: Add Lunar Lake support
	nilfs2: fix potential kernel bug due to lack of writeback flag waiting
	hv_utils: drain the timesync packets on onchannelcallback
	hugetlb_encode.h: fix undefined behaviour (34 << 26)
	usb-storage: alauda: Check whether the media is initialized
	rcutorture: Fix rcu_torture_one_read() pipe_count overflow comment
	batman-adv: bypass empty buckets in batadv_purge_orig_ref()
	scsi: qedi: Fix crash while reading debugfs attribute
	powerpc/pseries: Enforce hcall result buffer validity and size
	powerpc/io: Avoid clang null pointer arithmetic warnings
	usb: misc: uss720: check for incompatible versions of the Belkin F5U002
	udf: udftime: prevent overflow in udf_disk_stamp_to_time()
	PCI/PM: Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports
	MIPS: Octeon: Add PCIe link status check
	MIPS: Routerboard 532: Fix vendor retry check code
	cipso: fix total option length computation
	netrom: Fix a memory leak in nr_heartbeat_expiry()
	ipv6: prevent possible NULL dereference in rt6_probe()
	xfrm6: check ip6_dst_idev() return value in xfrm6_get_saddr()
	virtio_net: checksum offloading handling fix
	net: usb: rtl8150 fix unintiatilzed variables in rtl8150_get_link_ksettings
	regulator: core: Fix modpost error "regulator_get_regmap" undefined
	dmaengine: ioatdma: Fix missing kmem_cache_destroy()
	ACPICA: Revert "ACPICA: avoid Info: mapping multiple BARs. Your kernel is fine."
	drm/radeon: fix UBSAN warning in kv_dpm.c
	gcov: add support for GCC 14
	ARM: dts: samsung: smdkv310: fix keypad no-autorepeat
	ARM: dts: samsung: exynos4412-origen: fix keypad no-autorepeat
	ARM: dts: samsung: smdk4412: fix keypad no-autorepeat
	selftests/ftrace: Fix checkbashisms errors
	tracing: Add MODULE_DESCRIPTION() to preemptirq_delay_test
	perf/core: Fix missing wakeup when waiting for context reference
	PCI: Add PCI_ERROR_RESPONSE and related definitions
	x86/amd_nb: Check for invalid SMN reads
	iio: dac: ad5592r-base: Replace indio_dev->mlock with own device lock
	iio: dac: ad5592r: un-indent code-block for scale read
	iio: dac: ad5592r: fix temperature channel scaling value
	scsi: mpt3sas: Add ioc_<level> logging macros
	scsi: mpt3sas: Gracefully handle online firmware update
	scsi: mpt3sas: Avoid test/set_bit() operating in non-allocated memory
	xhci: Use soft retry to recover faster from transaction errors
	xhci: Set correct transferred length for cancelled bulk transfers
	usb: xhci: do not perform Soft Retry for some xHCI hosts
	pinctrl: fix deadlock in create_pinctrl() when handling -EPROBE_DEFER
	pinctrl: rockchip: fix pinmux bits for RK3328 GPIO2-B pins
	pinctrl: rockchip: fix pinmux bits for RK3328 GPIO3-B pins
	pinctrl: rockchip: fix pinmux reset in rockchip_pmx_set
	drm/amdgpu: fix UBSAN warning in kv_dpm.c
	netfilter: nf_tables: validate family when identifying table via handle
	ASoC: fsl-asoc-card: set priv->pdev before using it
	netfilter: nf_tables: fully validate NFT_DATA_VALUE on store to data registers
	drm/panel: ilitek-ili9881c: Fix warning with GPIO controllers that sleep
	net/iucv: Avoid explicit cpumask var allocation on stack
	ALSA: emux: improve patch ioctl data validation
	media: dvbdev: Initialize sbuf
	soc: ti: wkup_m3_ipc: Send NULL dummy message instead of pointer message
	nvme: fixup comment for nvme RDMA Provider Type
	gpio: davinci: Validate the obtained number of IRQs
	i2c: ocores: stop transfer on timeout
	i2c: ocores: set IACK bit after core is enabled
	x86: stop playing stack games in profile_pc()
	mmc: sdhci-pci: Convert PCIBIOS_* return codes to errnos
	iio: adc: ad7266: Fix variable checking bug
	iio: chemical: bme680: Fix pressure value output
	iio: chemical: bme680: Fix calibration data variable
	iio: chemical: bme680: Fix overflows in compensate() functions
	iio: chemical: bme680: Fix sensor data read operation
	net: usb: ax88179_178a: improve link status logs
	usb: gadget: printer: SS+ support
	usb: musb: da8xx: fix a resource leak in probe()
	usb: atm: cxacru: fix endpoint checking in cxacru_bind()
	tty: mcf: MCF54418 has 10 UARTS
	hexagon: fix fadvise64_64 calling conventions
	drm/nouveau/dispnv04: fix null pointer dereference in nv17_tv_get_ld_modes
	drm/nouveau/dispnv04: fix null pointer dereference in nv17_tv_get_hd_modes
	batman-adv: Don't accept TT entries for out-of-spec VIDs
	ata: libata-core: Fix double free on error
	ftruncate: pass a signed offset
	pwm: stm32: Refuse too small period requests
	ipv6: annotate some data-races around sk->sk_prot
	ipv6: Fix data races around sk->sk_prot.
	tcp: Fix data races around icsk->icsk_af_ops.
	arm64: dts: rockchip: Add sound-dai-cells for RK3368
	Linux 4.19.317

Change-Id: Ic469df3aff3d8233947e4f13951e091deca41c65
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
2024-07-06 10:19:40 +00:00
Dmitry Torokhov
d9bbbbf1a2 Input: try trimming too long modalias strings
commit 0774d19038c496f0c3602fb505c43e1b2d8eed85 upstream.

If an input device declares too many capability bits then modalias
string for such device may become too long and not fit into uevent
buffer, resulting in failure of sending said uevent. This, in turn,
may prevent userspace from recognizing existence of such devices.

This is typically not a concern for real hardware devices as they have
limited number of keys, but happen with synthetic devices such as
ones created by xen-kbdfront driver, which creates devices as being
capable of delivering all possible keys, since it doesn't know what
keys the backend may produce.

To deal with such devices input core will attempt to trim key data,
in the hope that the rest of modalias string will fit in the given
buffer. When trimming key data it will indicate that it is not
complete by placing "+," sign, resulting in conversions like this:

old: k71,72,73,74,78,7A,7B,7C,7D,8E,9E,A4,AD,E0,E1,E4,F8,174,
new: k71,72,73,74,78,7A,7B,7C,+,

This should allow existing udev rules continue to work with existing
devices, and will also allow writing more complex rules that would
recognize trimmed modalias and check input device characteristics by
other means (for example by parsing KEY= data in uevent or parsing
input device sysfs attributes).

Note that the driver core may try adding more uevent environment
variables once input core is done adding its own, so when forming
modalias we can not use the entire available buffer, so we reduce
it by somewhat an arbitrary amount (96 bytes).

Reported-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Link: https://lore.kernel.org/r/ZjAWMQCJdrxZkvkB@google.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
2024-07-05 09:00:23 +02:00
Greg Kroah-Hartman
f785d3e92e Merge 4.19.245 into android-4.19-stable
Changes in 4.19.245
	floppy: use a statically allocated error counter
	um: Cleanup syscall_handler_t definition/cast, fix warning
	Input: add bounds checking to input_set_capability()
	Input: stmfts - fix reference leak in stmfts_input_open
	crypto: stm32 - fix reference leak in stm32_crc_remove
	MIPS: lantiq: check the return value of kzalloc()
	drbd: remove usage of list iterator variable after loop
	ARM: 9191/1: arm/stacktrace, kasan: Silence KASAN warnings in unwind_frame()
	nilfs2: fix lockdep warnings in page operations for btree nodes
	nilfs2: fix lockdep warnings during disk space reclamation
	ALSA: wavefront: Proper check of get_user() error
	perf: Fix sys_perf_event_open() race against self
	Fix double fget() in vhost_net_set_backend()
	PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold
	crypto: qcom-rng - fix infinite loop on requests not multiple of WORD_SZ
	drm/dp/mst: fix a possible memory leak in fetch_monitor_name()
	mmc: core: Cleanup BKOPS support
	mmc: core: Specify timeouts for BKOPS and CACHE_FLUSH for eMMC
	mmc: block: Use generic_cmd6_time when modifying INAND_CMD38_ARG_EXT_CSD
	mmc: core: Default to generic_cmd6_time as timeout in __mmc_switch()
	net: macb: Increment rx bd head after allocating skb and buffer
	net/sched: act_pedit: sanitize shift argument before usage
	net: vmxnet3: fix possible use-after-free bugs in vmxnet3_rq_alloc_rx_buf()
	net: vmxnet3: fix possible NULL pointer dereference in vmxnet3_rq_cleanup()
	clk: at91: generated: consider range when calculating best rate
	net/qla3xxx: Fix a test in ql_reset_work()
	NFC: nci: fix sleep in atomic context bugs caused by nci_skb_alloc
	net/mlx5e: Properly block LRO when XDP is enabled
	net: af_key: add check for pfkey_broadcast in function pfkey_process
	ARM: 9196/1: spectre-bhb: enable for Cortex-A15
	ARM: 9197/1: spectre-bhb: fix loop8 sequence for Thumb2
	igb: skip phy status check where unavailable
	net: bridge: Clear offload_fwd_mark when passing frame up bridge interface.
	gpio: gpio-vf610: do not touch other bits when set the target bit
	gpio: mvebu/pwm: Refuse requests with inverted polarity
	perf bench numa: Address compiler error on s390
	scsi: qla2xxx: Fix missed DMA unmap for aborted commands
	mac80211: fix rx reordering with non explicit / psmp ack policy
	ethernet: tulip: fix missing pci_disable_device() on error in tulip_init_one()
	net: stmmac: fix missing pci_disable_device() on error in stmmac_pci_probe()
	net: atlantic: verify hw_head_ lies within TX buffer ring
	swiotlb: fix info leak with DMA_FROM_DEVICE
	Reinstate some of "swiotlb: rework "fix info leak with DMA_FROM_DEVICE""
	afs: Fix afs_getattr() to refetch file status if callback break occurred
	Linux 4.19.245

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ic56d0fb5980a3b034db32053a7e267716a5aec5e
2022-05-25 10:36:58 +02:00
Jeff LaBundy
01d41d7e7f Input: add bounds checking to input_set_capability()
[ Upstream commit 409353cbe9fe48f6bc196114c442b1cff05a39bc ]

Update input_set_capability() to prevent kernel panic in case the
event code exceeds the bitmap for the given event type.

Suggested-by: Tomasz Moń <tomasz.mon@camlingroup.com>
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Tomasz Moń <tomasz.mon@camlingroup.com>
Link: https://lore.kernel.org/r/20220320032537.545250-1-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25 09:10:37 +02:00
Greg Kroah-Hartman
ce7025b713 Merge 4.19.238 into android-4.19-stable
Changes in 4.19.238
	USB: serial: pl2303: add IBM device IDs
	USB: serial: simple: add Nokia phone driver
	netdevice: add the case if dev is NULL
	xfrm: fix tunnel model fragmentation behavior
	virtio_console: break out of buf poll on remove
	ethernet: sun: Free the coherent when failing in probing
	spi: Fix invalid sgs value
	net:mcf8390: Use platform_get_irq() to get the interrupt
	spi: Fix erroneous sgs value with min_t()
	af_key: add __GFP_ZERO flag for compose_sadb_supported in function pfkey_register
	fuse: fix pipe buffer lifetime for direct_io
	tpm: fix reference counting for struct tpm_chip
	block: Add a helper to validate the block size
	virtio-blk: Use blk_validate_block_size() to validate block size
	USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c
	xhci: make xhci_handshake timeout for xhci_reset() adjustable
	coresight: Fix TRCCONFIGR.QE sysfs interface
	iio: afe: rescale: use s64 for temporary scale calculations
	iio: inkern: apply consumer scale on IIO_VAL_INT cases
	iio: inkern: apply consumer scale when no channel scale is available
	iio: inkern: make a best effort on offset calculation
	clk: uniphier: Fix fixed-rate initialization
	ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
	Documentation: add link to stable release candidate tree
	Documentation: update stable tree link
	SUNRPC: avoid race between mod_timer() and del_timer_sync()
	NFSD: prevent underflow in nfssvc_decode_writeargs()
	NFSD: prevent integer overflow on 32 bit systems
	f2fs: fix to unlock page correctly in error path of is_alive()
	pinctrl: samsung: drop pin banks references on error paths
	can: ems_usb: ems_usb_start_xmit(): fix double dev_kfree_skb() in error path
	jffs2: fix use-after-free in jffs2_clear_xattr_subsystem
	jffs2: fix memory leak in jffs2_do_mount_fs
	jffs2: fix memory leak in jffs2_scan_medium
	mm/pages_alloc.c: don't create ZONE_MOVABLE beyond the end of a node
	mm: invalidate hwpoison page cache page in fault path
	mempolicy: mbind_range() set_policy() after vma_merge()
	scsi: libsas: Fix sas_ata_qc_issue() handling of NCQ NON DATA commands
	qed: display VF trust config
	qed: validate and restrict untrusted VFs vlan promisc mode
	Revert "Input: clear BTN_RIGHT/MIDDLE on buttonpads"
	ALSA: cs4236: fix an incorrect NULL check on list iterator
	ALSA: hda/realtek: Fix audio regression on Mi Notebook Pro 2020
	mm,hwpoison: unmap poisoned page before invalidation
	drbd: fix potential silent data corruption
	powerpc/kvm: Fix kvm_use_magic_page
	ACPI: properties: Consistently return -ENOENT if there are no more references
	drivers: hamradio: 6pack: fix UAF bug caused by mod_timer()
	block: don't merge across cgroup boundaries if blkcg is enabled
	drm/edid: check basic audio support on CEA extension block
	video: fbdev: sm712fb: Fix crash in smtcfb_read()
	video: fbdev: atari: Atari 2 bpp (STe) palette bugfix
	ARM: dts: at91: sama5d2: Fix PMERRLOC resource size
	ARM: dts: exynos: fix UART3 pins configuration in Exynos5250
	ARM: dts: exynos: add missing HDMI supplies on SMDK5250
	ARM: dts: exynos: add missing HDMI supplies on SMDK5420
	carl9170: fix missing bit-wise or operator for tx_params
	thermal: int340x: Increase bitmap size
	lib/raid6/test: fix multiple definition linking error
	DEC: Limit PMAX memory probing to R3k systems
	media: davinci: vpif: fix unbalanced runtime PM get
	brcmfmac: firmware: Allocate space for default boardrev in nvram
	brcmfmac: pcie: Replace brcmf_pcie_copy_mem_todev with memcpy_toio
	PCI: pciehp: Clear cmd_busy bit in polling mode
	regulator: qcom_smd: fix for_each_child.cocci warnings
	crypto: authenc - Fix sleep in atomic context in decrypt_tail
	crypto: mxs-dcp - Fix scatterlist processing
	spi: tegra114: Add missing IRQ check in tegra_spi_probe
	selftests/x86: Add validity check and allow field splitting
	spi: pxa2xx-pci: Balance reference count for PCI DMA device
	hwmon: (pmbus) Add mutex to regulator ops
	hwmon: (sch56xx-common) Replace WDOG_ACTIVE with WDOG_HW_RUNNING
	block: don't delete queue kobject before its children
	PM: hibernate: fix __setup handler error handling
	PM: suspend: fix return value of __setup handler
	hwrng: atmel - disable trng on failure path
	crypto: vmx - add missing dependencies
	clocksource/drivers/timer-of: Check return value of of_iomap in timer_of_base_init()
	ACPI: APEI: fix return value of __setup handlers
	crypto: ccp - ccp_dmaengine_unregister release dma channels
	hwmon: (pmbus) Add Vin unit off handling
	clocksource: acpi_pm: fix return value of __setup handler
	sched/debug: Remove mpol_get/put and task_lock/unlock from sched_show_numa
	perf/core: Fix address filter parser for multiple filters
	perf/x86/intel/pt: Fix address filter config for 32-bit kernel
	media: coda: Fix missing put_device() call in coda_get_vdoa_data
	video: fbdev: smscufx: Fix null-ptr-deref in ufx_usb_probe()
	video: fbdev: fbcvt.c: fix printing in fb_cvt_print_name()
	ARM: dts: qcom: ipq4019: fix sleep clock
	soc: ti: wkup_m3_ipc: Fix IRQ check in wkup_m3_ipc_probe
	media: em28xx: initialize refcount before kref_get
	media: usb: go7007: s2250-board: fix leak in probe()
	ASoC: rt5663: check the return value of devm_kzalloc() in rt5663_parse_dp()
	ASoC: ti: davinci-i2s: Add check for clk_enable()
	ALSA: spi: Add check for clk_enable()
	arm64: dts: ns2: Fix spi-cpol and spi-cpha property
	arm64: dts: broadcom: Fix sata nodename
	printk: fix return value of printk.devkmsg __setup handler
	ASoC: mxs-saif: Handle errors for clk_enable
	ASoC: atmel_ssc_dai: Handle errors for clk_enable
	memory: emif: Add check for setup_interrupts
	memory: emif: check the pointer temp in get_device_details()
	ALSA: firewire-lib: fix uninitialized flag for AV/C deferred transaction
	media: stk1160: If start stream fails, return buffers with VB2_BUF_STATE_QUEUED
	ASoC: atmel: Add missing of_node_put() in at91sam9g20ek_audio_probe
	ASoC: wm8350: Handle error for wm8350_register_irq
	ASoC: fsi: Add check for clk_enable
	video: fbdev: omapfb: Add missing of_node_put() in dvic_probe_of
	ASoC: dmaengine: do not use a NULL prepare_slave_config() callback
	ASoC: mxs: Fix error handling in mxs_sgtl5000_probe
	ASoC: imx-es8328: Fix error return code in imx_es8328_probe()
	ASoC: msm8916-wcd-digital: Fix missing clk_disable_unprepare() in msm8916_wcd_digital_probe
	mmc: davinci_mmc: Handle error for clk_enable
	drm/bridge: Fix free wrong object in sii8620_init_rcp_input_dev
	ath10k: fix memory overwrite of the WoWLAN wakeup packet pattern
	Bluetooth: hci_serdev: call init_rwsem() before p->open()
	mtd: onenand: Check for error irq
	drm/edid: Don't clear formats if using deep color
	drm/amd/display: Fix a NULL pointer dereference in amdgpu_dm_connector_add_common_modes()
	ath9k_htc: fix uninit value bugs
	KVM: PPC: Fix vmx/vsx mixup in mmio emulation
	power: reset: gemini-poweroff: Fix IRQ check in gemini_poweroff_probe
	ray_cs: Check ioremap return value
	power: supply: ab8500: Fix memory leak in ab8500_fg_sysfs_init
	HID: i2c-hid: fix GET/SET_REPORT for unnumbered reports
	iwlwifi: Fix -EIO error code that is never returned
	dm crypt: fix get_key_size compiler warning if !CONFIG_KEYS
	scsi: pm8001: Fix command initialization in pm80XX_send_read_log()
	scsi: pm8001: Fix command initialization in pm8001_chip_ssp_tm_req()
	scsi: pm8001: Fix payload initialization in pm80xx_set_thermal_config()
	scsi: pm8001: Fix abort all task initialization
	TOMOYO: fix __setup handlers return values
	ext2: correct max file size computing
	drm/tegra: Fix reference leak in tegra_dsi_ganged_probe
	power: supply: bq24190_charger: Fix bq24190_vbus_is_enabled() wrong false return
	drm/bridge: cdns-dsi: Make sure to to create proper aliases for dt
	powerpc/Makefile: Don't pass -mcpu=powerpc64 when building 32-bit
	KVM: x86: Fix emulation in writing cr8
	KVM: x86/emulator: Defer not-present segment check in __load_segment_descriptor()
	hv_balloon: rate-limit "Unhandled message" warning
	i2c: xiic: Make bus names unique
	power: supply: wm8350-power: Handle error for wm8350_register_irq
	power: supply: wm8350-power: Add missing free in free_charger_irq
	PCI: Reduce warnings on possible RW1C corruption
	powerpc/sysdev: fix incorrect use to determine if list is empty
	mfd: mc13xxx: Add check for mc13xxx_irq_request
	vxcan: enable local echo for sent CAN frames
	MIPS: RB532: fix return value of __setup handler
	mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init
	USB: storage: ums-realtek: fix error code in rts51x_read_mem()
	af_netlink: Fix shift out of bounds in group mask calculation
	i2c: mux: demux-pinctrl: do not deactivate a master that is not active
	selftests/bpf/test_lirc_mode2.sh: Exit with proper code
	tcp: ensure PMTU updates are processed during fastopen
	mfd: asic3: Add missing iounmap() on error asic3_mfd_probe
	mxser: fix xmit_buf leak in activate when LSR == 0xff
	pwm: lpc18xx-sct: Initialize driver data and hardware before pwmchip_add()
	staging:iio:adc:ad7280a: Fix handing of device address bit reversing.
	clk: qcom: ipq8074: Use floor ops for SDCC1 clock
	serial: 8250_mid: Balance reference count for PCI DMA device
	serial: 8250: Fix race condition in RTS-after-send handling
	iio: adc: Add check for devm_request_threaded_irq
	dma-debug: fix return value of __setup handlers
	clk: qcom: clk-rcg2: Update the frac table for pixel clock
	remoteproc: qcom_wcnss: Add missing of_node_put() in wcnss_alloc_memory_region
	clk: actions: Terminate clk_div_table with sentinel element
	clk: loongson1: Terminate clk_div_table with sentinel element
	clk: clps711x: Terminate clk_div_table with sentinel element
	clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver
	NFS: remove unneeded check in decode_devicenotify_args()
	pinctrl: mediatek: Fix missing of_node_put() in mtk_pctrl_init
	pinctrl: nomadik: Add missing of_node_put() in nmk_pinctrl_probe
	pinctrl/rockchip: Add missing of_node_put() in rockchip_pinctrl_probe
	tty: hvc: fix return value of __setup handler
	kgdboc: fix return value of __setup handler
	kgdbts: fix return value of __setup handler
	jfs: fix divide error in dbNextAG
	netfilter: nf_conntrack_tcp: preserve liberal flag in tcp options
	clk: qcom: gcc-msm8994: Fix gpll4 width
	xen: fix is_xen_pmu()
	net: phy: broadcom: Fix brcm_fet_config_init()
	qlcnic: dcb: default to returning -EOPNOTSUPP
	net/x25: Fix null-ptr-deref caused by x25_disconnect
	NFSv4/pNFS: Fix another issue with a list iterator pointing to the head
	lib/test: use after free in register_test_dev_kmod()
	selinux: use correct type for context length
	loop: use sysfs_emit() in the sysfs xxx show()
	Fix incorrect type in assignment of ipv6 port for audit
	irqchip/qcom-pdc: Fix broken locking
	irqchip/nvic: Release nvic_base upon failure
	bfq: fix use-after-free in bfq_dispatch_request
	ACPICA: Avoid walking the ACPI Namespace if it is not there
	lib/raid6/test/Makefile: Use $(pound) instead of \# for Make 4.3
	Revert "Revert "block, bfq: honor already-setup queue merges""
	ACPI/APEI: Limit printable size of BERT table data
	PM: core: keep irq flags in device_pm_check_callbacks()
	spi: tegra20: Use of_device_get_match_data()
	ext4: don't BUG if someone dirty pages without asking ext4 first
	ntfs: add sanity check on allocation size
	video: fbdev: nvidiafb: Use strscpy() to prevent buffer overflow
	video: fbdev: w100fb: Reset global state
	video: fbdev: cirrusfb: check pixclock to avoid divide by zero
	video: fbdev: omapfb: acx565akm: replace snprintf with sysfs_emit
	ARM: dts: qcom: fix gic_irq_domain_translate warnings for msm8960
	ARM: dts: bcm2837: Add the missing L1/L2 cache information
	video: fbdev: omapfb: panel-dsi-cm: Use sysfs_emit() instead of snprintf()
	video: fbdev: omapfb: panel-tpo-td043mtea1: Use sysfs_emit() instead of snprintf()
	video: fbdev: udlfb: replace snprintf in show functions with sysfs_emit
	ASoC: soc-core: skip zero num_dai component in searching dai name
	media: cx88-mpeg: clear interrupt status register before streaming video
	ARM: tegra: tamonten: Fix I2C3 pad setting
	ARM: mmp: Fix failure to remove sram device
	video: fbdev: sm712fb: Fix crash in smtcfb_write()
	media: Revert "media: em28xx: add missing em28xx_close_extension"
	media: hdpvr: initialize dev->worker at hdpvr_register_videodev
	mmc: host: Return an error when ->enable_sdio_irq() ops is missing
	powerpc/lib/sstep: Fix 'sthcx' instruction
	powerpc/lib/sstep: Fix build errors with newer binutils
	powerpc: Fix build errors with newer binutils
	scsi: qla2xxx: Fix stuck session in gpdb
	scsi: qla2xxx: Fix warning for missing error code
	scsi: qla2xxx: Check for firmware dump already collected
	scsi: qla2xxx: Suppress a kernel complaint in qla_create_qpair()
	scsi: qla2xxx: Fix incorrect reporting of task management failure
	scsi: qla2xxx: Fix hang due to session stuck
	scsi: qla2xxx: Reduce false trigger to login
	scsi: qla2xxx: Use correct feature type field during RFF_ID processing
	KVM: Prevent module exit until all VMs are freed
	KVM: x86: fix sending PV IPI
	ubifs: rename_whiteout: Fix double free for whiteout_ui->data
	ubifs: Fix deadlock in concurrent rename whiteout and inode writeback
	ubifs: Add missing iput if do_tmpfile() failed in rename whiteout
	ubifs: setflags: Make dirtied_ino_d 8 bytes aligned
	ubifs: Fix read out-of-bounds in ubifs_wbuf_write_nolock()
	ubifs: rename_whiteout: correct old_dir size computing
	can: mcba_usb: mcba_usb_start_xmit(): fix double dev_kfree_skb in error path
	can: mcba_usb: properly check endpoint type
	gfs2: Make sure FITRIM minlen is rounded up to fs block size
	pinctrl: pinconf-generic: Print arguments for bias-pull-*
	ubi: Fix race condition between ctrl_cdev_ioctl and ubi_cdev_ioctl
	ACPI: CPPC: Avoid out of bounds access when parsing _CPC data
	mm/mmap: return 1 from stack_guard_gap __setup() handler
	mm/memcontrol: return 1 from cgroup.memory __setup() handler
	mm/usercopy: return 1 from hardened_usercopy __setup() handler
	bpf: Fix comment for helper bpf_current_task_under_cgroup()
	ubi: fastmap: Return error code if memory allocation fails in add_aeb()
	ASoC: topology: Allow TLV control to be either read or write
	ARM: dts: spear1340: Update serial node properties
	ARM: dts: spear13xx: Update SPI dma properties
	um: Fix uml_mconsole stop/go
	openvswitch: Fixed nd target mask field in the flow dump.
	KVM: x86: Forbid VMM to set SYNIC/STIMER MSRs when SynIC wasn't activated
	ubifs: Rectify space amount budget for mkdir/tmpfile operations
	rtc: wm8350: Handle error for wm8350_register_irq
	riscv module: remove (NOLOAD)
	ARM: 9187/1: JIVE: fix return value of __setup handler
	KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs
	drm: Add orientation quirk for GPD Win Max
	ath5k: fix OOB in ath5k_eeprom_read_pcal_info_5111
	drm/amd/amdgpu/amdgpu_cs: fix refcount leak of a dma_fence obj
	ptp: replace snprintf with sysfs_emit
	powerpc: dts: t104xrdb: fix phy type for FMAN 4/5
	scsi: mvsas: Replace snprintf() with sysfs_emit()
	scsi: bfa: Replace snprintf() with sysfs_emit()
	power: supply: axp20x_battery: properly report current when discharging
	powerpc: Set crashkernel offset to mid of RMA region
	PCI: aardvark: Fix support for MSI interrupts
	iommu/arm-smmu-v3: fix event handling soft lockup
	usb: ehci: add pci device support for Aspeed platforms
	PCI: pciehp: Add Qualcomm quirk for Command Completed erratum
	ipv4: Invalidate neighbour for broadcast address upon address addition
	dm ioctl: prevent potential spectre v1 gadget
	drm/amdkfd: make CRAT table missing message informational only
	scsi: pm8001: Fix pm8001_mpi_task_abort_resp()
	scsi: aha152x: Fix aha152x_setup() __setup handler return value
	net/smc: correct settings of RMB window update limit
	macvtap: advertise link netns via netlink
	bnxt_en: Eliminate unintended link toggle during FW reset
	MIPS: fix fortify panic when copying asm exception handlers
	scsi: libfc: Fix use after free in fc_exch_abts_resp()
	usb: dwc3: omap: fix "unbalanced disables for smps10_out1" on omap5evm
	xtensa: fix DTC warning unit_address_format
	Bluetooth: Fix use after free in hci_send_acl
	init/main.c: return 1 from handled __setup() functions
	minix: fix bug when opening a file with O_DIRECT
	w1: w1_therm: fixes w1_seq for ds28ea00 sensors
	NFSv4: Protect the state recovery thread against direct reclaim
	xen: delay xen_hvm_init_time_ops() if kdump is boot on vcpu>=32
	clk: Enforce that disjoints limits are invalid
	SUNRPC/call_alloc: async tasks mustn't block waiting for memory
	NFS: swap IO handling is slightly different for O_DIRECT IO
	NFS: swap-out must always use STABLE writes.
	serial: samsung_tty: do not unlock port->lock for uart_write_wakeup()
	virtio_console: eliminate anonymous module_init & module_exit
	jfs: prevent NULL deref in diFree
	parisc: Fix CPU affinity for Lasi, WAX and Dino chips
	net: add missing SOF_TIMESTAMPING_OPT_ID support
	mm: fix race between MADV_FREE reclaim and blkdev direct IO read
	KVM: arm64: Check arm64_get_bp_hardening_data() didn't return NULL
	drm/amdgpu: fix off by one in amdgpu_gfx_kiq_acquire()
	Drivers: hv: vmbus: Fix potential crash on module unload
	scsi: zorro7xx: Fix a resource leak in zorro7xx_remove_one()
	net: stmmac: Fix unset max_speed difference between DT and non-DT platforms
	drm/imx: Fix memory leak in imx_pd_connector_get_modes
	net: openvswitch: don't send internal clone attribute to the userspace.
	rxrpc: fix a race in rxrpc_exit_net()
	qede: confirm skb is allocated before using
	spi: bcm-qspi: fix MSPI only access with bcm_qspi_exec_mem_op()
	drbd: Fix five use after free bugs in get_initial_state
	Revert "mmc: sdhci-xenon: fix annoying 1.8V regulator warning"
	mmc: renesas_sdhi: don't overwrite TAP settings when HS400 tuning is complete
	mmmremap.c: avoid pointless invalidate_range_start/end on mremap(old_size=0)
	mm/mempolicy: fix mpol_new leak in shared_policy_replace
	x86/pm: Save the MSR validity status at context setup
	x86/speculation: Restore speculation related MSRs during S3 resume
	btrfs: fix qgroup reserve overflow the qgroup limit
	arm64: patch_text: Fixup last cpu should be master
	ata: sata_dwc_460ex: Fix crash due to OOB write
	perf: qcom_l2_pmu: fix an incorrect NULL check on list iterator
	irqchip/gic-v3: Fix GICR_CTLR.RWP polling
	tools build: Filter out options and warnings not supported by clang
	tools build: Use $(shell ) instead of `` to get embedded libperl's ccopts
	dmaengine: Revert "dmaengine: shdma: Fix runtime PM imbalance on error"
	mm: don't skip swap entry even if zap_details specified
	arm64: module: remove (NOLOAD) from linker script
	mm/sparsemem: fix 'mem_section' will never be NULL gcc 12 warning
	cgroup: Use open-time credentials for process migraton perm checks
	cgroup: Allocate cgroup_file_ctx for kernfs_open_file->priv
	cgroup: Use open-time cgroup namespace for process migration perm checks
	selftests: cgroup: Make cg_create() use 0755 for permission instead of 0644
	selftests: cgroup: Test open-time credential usage for migration checks
	selftests: cgroup: Test open-time cgroup namespace usage for migration checks
	xfrm: policy: match with both mark and mask on user interfaces
	drm/amdgpu: Check if fd really is an amdgpu fd.
	drm/amdkfd: Use drm_priv to pass VM from KFD to amdgpu
	Linux 4.19.238

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I55a3615d2fbf9bde9ac152456701b36a6c9d20b6
2022-04-18 09:57:50 +02:00
José Expósito
4e6bfa1c76 Revert "Input: clear BTN_RIGHT/MIDDLE on buttonpads"
commit 8b188fba75195745026e11d408e4a7e94e01d701 upstream.

This reverts commit 37ef4c19b4c659926ce65a7ac709ceaefb211c40.

The touchpad present in the Dell Precision 7550 and 7750 laptops
reports a HID_DG_BUTTONTYPE of type MT_BUTTONTYPE_CLICKPAD. However,
the device is not a clickpad, it is a touchpad with physical buttons.

In order to fix this issue, a quirk for the device was introduced in
libinput [1] [2] to disable the INPUT_PROP_BUTTONPAD property:

	[Precision 7x50 Touchpad]
	MatchBus=i2c
	MatchUdevType=touchpad
	MatchDMIModalias=dmi:*svnDellInc.:pnPrecision7?50*
	AttrInputPropDisable=INPUT_PROP_BUTTONPAD

However, because of the change introduced in 37ef4c19b4 ("Input: clear
BTN_RIGHT/MIDDLE on buttonpads") the BTN_RIGHT key bit is not mapped
anymore breaking the device right click button and making impossible to
workaround it in user space.

In order to avoid breakage on other present or future devices, revert
the patch causing the issue.

Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220321184404.20025-1-jose.exposito89@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15 14:14:40 +02:00
Greg Kroah-Hartman
27e814695c Merge 4.19.233 into android-4.19-stable
Changes in 4.19.233
	mac80211_hwsim: report NOACK frames in tx_status
	mac80211_hwsim: initialize ieee80211_tx_info at hw_scan_work
	i2c: bcm2835: Avoid clock stretching timeouts
	ASoC: rt5668: do not block workqueue if card is unbound
	ASoC: rt5682: do not block workqueue if card is unbound
	Input: clear BTN_RIGHT/MIDDLE on buttonpads
	cifs: fix double free race when mount fails in cifs_get_root()
	dmaengine: shdma: Fix runtime PM imbalance on error
	i2c: cadence: allow COMPILE_TEST
	i2c: qup: allow COMPILE_TEST
	net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990
	usb: gadget: don't release an existing dev->buf
	usb: gadget: clear related members when goto fail
	ata: pata_hpt37x: fix PCI clock detection
	ALSA: intel_hdmi: Fix reference to PCM buffer address
	ASoC: ops: Shift tested values in snd_soc_put_volsw() by +min
	xfrm: fix MTU regression
	netfilter: fix use-after-free in __nf_register_net_hook()
	xfrm: fix the if_id check in changelink
	xfrm: enforce validity of offload input flags
	netfilter: nf_queue: don't assume sk is full socket
	netfilter: nf_queue: fix possible use-after-free
	batman-adv: Request iflink once in batadv-on-batadv check
	batman-adv: Request iflink once in batadv_get_real_netdevice
	batman-adv: Don't expect inter-netns unique iflink indices
	net: dcb: flush lingering app table entries for unregistered devices
	net/smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error generated by client
	net/smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error cause by server
	block: Fix fsync always failed if once failed
	PCI: pciehp: Fix infinite loop in IRQ handler upon power fault
	xen/netfront: destroy queues before real_num_tx_queues is zeroed
	mac80211: fix forwarded mesh frames AC & queue selection
	net: stmmac: fix return value of __setup handler
	net: sxgbe: fix return value of __setup handler
	net: arcnet: com20020: Fix null-ptr-deref in com20020pci_probe()
	efivars: Respect "block" flag in efivar_entry_set_safe()
	firmware: arm_scmi: Remove space in MODULE_ALIAS name
	can: gs_usb: change active_channels's type from atomic_t to u8
	arm64: dts: rockchip: Switch RK3399-Gru DP to SPDIF output
	ARM: 9182/1: mmu: fix returns from early_param() and __setup() functions
	ibmvnic: free reset-work-item when flushing
	soc: fsl: qe: Check of ioremap return value
	net: chelsio: cxgb3: check the return value of pci_find_capability()
	nl80211: Handle nla_memdup failures in handle_nan_filter
	Input: elan_i2c - move regulator_[en|dis]able() out of elan_[en|dis]able_power()
	Input: elan_i2c - fix regulator enable count imbalance after suspend/resume
	HID: add mapping for KEY_ALL_APPLICATIONS
	memfd: fix F_SEAL_WRITE after shmem huge page allocated
	tracing/histogram: Fix sorting on old "cpu" value
	btrfs: add missing run of delayed items after unlink during log replay
	net: dcb: disable softirqs in dcbnl_flush_dev()
	hamradio: fix macro redefine warning
	Linux 4.19.233

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I1b655a8f94a7e445ddbd61e1f102e2eca10ebaa2
2022-03-11 10:08:25 +01:00
José Expósito
a501a2f238 Input: clear BTN_RIGHT/MIDDLE on buttonpads
[ Upstream commit 37ef4c19b4c659926ce65a7ac709ceaefb211c40 ]

Buttonpads are expected to map the INPUT_PROP_BUTTONPAD property bit
and the BTN_LEFT key bit.

As explained in the specification, where a device has a button type
value of 0 (click-pad) or 1 (pressure-pad) there should not be
discrete buttons:
https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/touchpad-windows-precision-touchpad-collection#device-capabilities-feature-report

However, some drivers map the BTN_RIGHT and/or BTN_MIDDLE key bits even
though the device is a buttonpad and therefore does not have those
buttons.

This behavior has forced userspace applications like libinput to
implement different workarounds and quirks to detect buttonpads and
offer to the user the right set of features and configuration options.
For more information:
https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/726

In order to avoid this issue clear the BTN_RIGHT and BTN_MIDDLE key
bits when the input device is register if the INPUT_PROP_BUTTONPAD
property bit is set.

Notice that this change will not affect udev because it does not check
for buttons. See systemd/src/udev/udev-builtin-input_id.c.

List of known affected hardware:

 - Chuwi AeroBook Plus
 - Chuwi Gemibook
 - Framework Laptop
 - GPD Win Max
 - Huawei MateBook 2020
 - Prestigio Smartbook 141 C2
 - Purism Librem 14v1
 - StarLite Mk II   - AMI firmware
 - StarLite Mk II   - Coreboot firmware
 - StarLite Mk III  - AMI firmware
 - StarLite Mk III  - Coreboot firmware
 - StarLabTop Mk IV - AMI firmware
 - StarLabTop Mk IV - Coreboot firmware
 - StarBook Mk V

Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20220208174806.17183-1-jose.exposito89@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-08 19:04:06 +01:00
Dmitry Torokhov
597dda4862 UPSTREAM: Input: fix stale timestamp on key autorepeat events
We need to refresh timestamp when emitting key autorepeat events, otherwise
they will carry timestamp of the original key press event.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206929
Fixes: 3b51c44bd693 ("Input: allow drivers specify timestamp for input events")
Cc: stable@vger.kernel.org
Reported-by: teika kazura <teika@gmx.com>
Tested-by: teika kazura <teika@gmx.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
(cherry picked from commit 4134252ab7e2c339a54302b88496cb5a89cdbaec)
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I7062d933a35b122f0ffc1c06d0dd7e60561ef97c
2020-11-16 07:43:08 +01:00
Dmitry Torokhov
8c219ccb7b UPSTREAM: Input: reset device timestamp on sync
We need to reset input device's timestamp on input_sync(), otherwise
drivers not using input_set_timestamp() will end up with a stale
timestamp after their clients consume first input event.

Bug: 150896413
Fixes: 3b51c44bd693 ("Input: allow drivers specify timestamp for input events")
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
(cherry picked from commit 4370b231d1001e0b560f82fd93616c7e54bd5fda)
Signed-off-by: Hridya Valsaraju <hridya@google.com>
Change-Id: I35b76cbed146a4ee8e021388eb7a68282daf9003
2020-03-12 10:46:18 -07:00
Atif Niyaz
e6ae32babb UPSTREAM: Input: allow drivers specify timestamp for input events
Currently, evdev stamps events with timestamps acquired in evdev_events()
However, this timestamping may not be accurate in terms of measuring
when the actual event happened.

Let's allow individual drivers specify timestamp in order to provide a more
accurate sense of time for the event. It is expected that drivers will set the
timestamp in their hard interrupt routine.

Bug: 150896413
Signed-off-by: Atif Niyaz <atifniyaz@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Change-Id: I718209b41958a771c48f6069a597cec469c4074d
(cherry picked from commit 3b51c44bd6936e86a7180abd9aebc4387a479253)
Signed-off-by: Hridya Valsaraju <hridya@google.com>
2020-03-12 10:46:18 -07:00
Dmitry Torokhov
f5b9bfbe94 Input: add safety guards to input_set_keycode()
commit cb222aed03d798fc074be55e59d9a112338ee784 upstream.

If we happen to have a garbage in input device's keycode table with values
too big we'll end up doing clear_bit() with offset way outside of our
bitmaps, damaging other objects within an input device or even outside of
it. Let's add sanity checks to the returned old keycodes.

Reported-by: syzbot+c769968809f9359b07aa@syzkaller.appspotmail.com
Reported-by: syzbot+76f3a30e88d256644c78@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20191207212757.GA245964@dtor-ws
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14 20:07:01 +01:00
Dmitry Torokhov
100294cee9 Input: do not use WARN() in input_alloc_absinfo()
Some of fuzzers set panic_on_warn=1 so that they can handle WARN()ings
the same way they handle full-blown kernel crashes. We used WARN() in
input_alloc_absinfo() to get a better idea where memory allocation
failed, but since then kmalloc() and friends started dumping call stack on
memory allocation failures anyway, so we are not getting anything extra
from WARN().

Because of the above, let's replace WARN with dev_err(). We use dev_err()
instead of simply removing message and relying on kcalloc() to give us
stack dump so that we'd know the instance of hardware device to which we
were trying to attach input device.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-08-08 11:23:47 -07:00
Nick Simonov
67043f41dd Input: replace hard coded string with __func__ in pr_err()
Change hardcoded string "input_set_capability" in pr_err() function call,
replace it with "%s" __func__ instead.

Signed-off-by: Nick Simonov <nicksimonovv@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-15 12:00:53 -07:00
Linus Torvalds
a9a08845e9 vfs: do bulk POLL* -> EPOLL* replacement
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:

    for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
        L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
        for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
    done

with de-mangling cleanups yet to come.

NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do.  But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.

The next patch from Al will sort out the final differences, and we
should be all done.

Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-11 14:34:03 -08:00
Al Viro
afc9a42b74 the rest of drivers/*: annotate ->poll() instances
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-28 11:06:58 -05:00
Kees Cook
841b86f328 treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE casts
With all callbacks converted, and the timer callback prototype
switched over, the TIMER_FUNC_TYPE cast is no longer needed,
so remove it. Conversion was done with the following scripts:

    perl -pi -e 's|\(TIMER_FUNC_TYPE\)||g' \
        $(git grep TIMER_FUNC_TYPE | cut -d: -f1 | sort -u)

    perl -pi -e 's|\(TIMER_DATA_TYPE\)||g' \
        $(git grep TIMER_DATA_TYPE | cut -d: -f1 | sort -u)

The now unused macros are also dropped from include/linux/timer.h.

Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21 16:35:54 -08:00
Kees Cook
4e974c1200 Input: convert autorepeat timer to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-11-03 12:45:23 -07:00
Dmitry Torokhov
8724ecb072 Input: allow matching device IDs on property bits
Let's allow matching input devices on their property bits, both in-kernel
and when generating module aliases.

Tested-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19 16:54:49 -07:00
Dmitry Torokhov
55dfce873d Input: factor out and export input_device_id matching code
Factor out and export input_match_device_id() so that modules may use it.
It will be needed by joydev to blacklist accelerometers in composite
devices.

Tested-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19 16:53:34 -07:00
Arvind Yadav
5e895b7416 Input: constify attribute_group structures
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
  17755	   1312	     16	  19083	   4a8b	drivers/input/input.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
  17947	   1120	     16	  19083	   4a8b	drivers/input/input.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-07-12 14:18:26 -07:00
Markus Elfring
c3f6f8612b Input: switch to using sizeof(*type) when allocating memory
Instead of specifying type explicitly, derive it from the type of pointer
when allocating memory, which is considered safer practice.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-10 14:39:34 -07:00
Markus Elfring
63c9576544 Input: use seq_puts() in input_devices_seq_show()
Use seq_puts() when printing a string which does not contain a data format
specification.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-10 14:39:34 -07:00
Markus Elfring
bb546136cc Input: use seq_putc() in input_seq_print_bitmap()
Switch to using seq_putc() when printing a single character '0'.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-10 14:39:33 -07:00
Dmitry Torokhov
6ecfe51b40 Input: refuse to register absolute devices without absinfo
If device is supposed to send absolute events (i.e. EV_ABS bit is set in
dev->evbit) but dev->absinfo is not allocated, then the driver has done
something wrong, and we should not register such device. Otherwise we'll
crash later, when driver tries to send absolute event.

Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-02-01 10:33:21 -08:00
Bhumika Goyal
f719315b52 Input: constify device_type structures
Declare device_type structures as const as they are only stored in the
type field of a device structure. This field is of type const, so add
const to declaration of device_type structures.

File size before:
   text	   data	    bss	    dec	    hex	filename
  17184	   1344	     80	  18608	   48b0	drivers/input/input.o

File size after:
   text	   data	    bss	    dec	    hex	filename
  17248	   1280	     80	  18608	   48b0	drivers/input/input.o

File size before:
   text	   data	    bss	    dec	    hex	filename
   2355	    384	      8	   2747	    abb	drivers/input/rmi4/rmi_bus.o

File size after:
   text	   data	    bss	    dec	    hex	filename
   2483	    264	      8	   2755	    ac3	drivers/input/rmi4/rmi_bus.o

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-01-24 12:38:49 -08:00
Dmitry Torokhov
8c57a5e7b2 Merge branch 'for-linus' into next
Sync up to bring in wacom_w8001 changes to avoid merge conflicts later.
2016-07-19 11:02:56 -07:00
Dmitry Torokhov
b55eb29841 Input: feed more data into entropy pool
Commit 4369c64c79 ("Input: Send events one packet at a time")
significantly reduced amount of entropy input core was feeding to the rest
of the system, because only the very first event in the event block would
be used as source of entropy.

With this change we will be calling add_input_randomness() for every event
that is not filtered by the input core as a duplicate. In addition, all
EV_SYN events are ignored.

Acked-by: Henrik Rydberg <rydberg@bitmath.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-05-19 09:35:18 -07:00
Andrew Morton
b8b4ead11e drivers/input: eliminate INPUT_COMPAT_TEST macro
INPUT_COMPAT_TEST became much simpler after commit f4056b5284
("input: redefine INPUT_COMPAT_TEST as in_compat_syscall()") so we can
cleanly eliminate it altogether.

Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 16:37:42 -07:00
Petri Gynther
027c71bbae Input: improve autorepeat initialization
Add new function input_enable_softrepeat() that allows drivers to
initialize their own values for input_dev->rep[REP_DELAY] and
input_dev->rep[REP_PERIOD], but also use the software autorepeat
functionality from input.c.

For example, a HID driver could do:

static void xyz_input_configured(struct hid_device *hid,
                                 struct hid_input *hidinput)
{
        input_enable_softrepeat(hidinput->input, 400, 100);
}

static struct hid_driver xyz_driver = {
        .input_configured = xyz_input_configured,
}

Signed-off-by: Petri Gynther <pgynther@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-13 23:30:31 -07:00
Dmitry Torokhov
00159f19a5 Input: do not emit unneeded EV_SYN when suspending
Do not emit EV_SYN/SYN_REPORT on suspend if there were no keys that are
still pressed as we are suspending the device (and in all other cases when
input core is forcibly releasing keys via input_dev_release_keys() call).

Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-08-07 14:55:38 -07:00
Anshul Garg
3e2b03dad5 Input: use for_each_set_bit() where appropriate
Instead of iterating over all bits in a bitmap and test them individually
let's siwtch to for_each_set_bit() which is more compact and is also
faster.

Also use bitmap_weight() when counting number of set bits.

This also fixes INPUT_DO_TOGGLE() implementation as it should have used
*_CNT as the upper boundary, not *_MAX.

Signed-off-by: Anshul Garg <aksgarg1989@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-25 14:44:36 -07:00
Shailendra Verma
ec8beff964 Input: fix typo in comment to input_handler_for_each_handle()
Signed-off-by: Shailendra Verma <shailendra.capricorn@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-05-20 14:45:41 -07:00
Anshul Garg
2c50ad340c Input: do not try to filter out events if handler is not a filter
If given input handler is not a filter there is no point is iterating list
of events in a packet to see if some of them need to be filtered out.

Signed-off-by: Anshul Garg <anshul.g@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-01-08 13:53:34 -08:00
Anshul Garg
5ab1714570 Input: small tweak to autorepeat handling
If a device does not support autorepeat or does not emit any key events we
should not be scanning all events in a packet to decide if we should start
or stop autorepeat function.

Signed-off-by: Anshul Garg <anshul.g@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-01-08 13:53:30 -08:00
Anshul Garg
baf332c0f1 Input: optimize events_per_packet count calculation
This patch avoids unnecessary operations while estimating events per
packet for an input device when event type is not set.

Signed-off-by: Anshul Garg <anshul.g@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-15 21:45:55 -08:00
Aniroop Mathur
9c7d66fa9b Input: initialize input_no to -1 to avoid subtraction
Let's initializes input_no to -1 in order to avoid extra subtraction
operation performed every time we allocate an input device.

Signed-off-by: Aniroop Mathur <aniroop.mathur@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-02 21:34:49 -08:00
Richard Leitner
bf1d50fa74 Input: avoid negative input device numbers
Fix the format string for input device name generation to avoid negative
device numbers when the id exceeds the maximum signed integer value.

Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-09 15:27:24 -07:00
Dmitry Torokhov
2c9a9cfec0 Input: automatically set EV_ABS bit in input_set_abs_params
Let's automatically set EV_ABS bit in device's event type list when calling
input_set_abs_params() so that drivers do not have to do it explicitly.

These calls are never in a hot paths so we won't lose much time by setting
the same bit several times.

Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-08 11:06:12 -07:00
Dmitry Torokhov
50c5d36dab Input: fix defuzzing logic
We attempt to remove noise from coordinates reported by devices in
input_handle_abs_event(), unfortunately, unless we were dropping the
event altogether, we were ignoring the adjusted value and were passing
on the original value instead.

Cc: stable@vger.kernel.org
Reviewed-by: Andrew de los Reyes <adlr@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-20 13:17:42 -07:00
Dmitry Torokhov
55df811f20 Merge branch 'next' into for-linus
First round of input updates for 3.14.
2014-01-23 08:10:44 -08:00
Dmitry Torokhov
28a2a2e1ae Input: allocate absinfo data when setting ABS capability
We need to make sure we allocate absinfo data when we are setting one of
EV_ABS/ABS_XXX capabilities, otherwise we may bomb when we try to emit this
event.

Rested-by: Paul Cercueil <pcercuei@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-31 10:53:19 -08:00
Aleksej Makarov
768d9aa557 Input: don't call input_dev_release_keys() in resume
When waking up the platform by pressing a specific key, sending a
release on that key makes it impossible to react on the event in
user-space. This is fixed by moving the input_reset_device() call to
resume instead.

[dmitry.torokhov@gmail.com: make sure we still restore LED/sound state
after resume, handle hibernation properly]

Signed-off-by: Aleksej Makarov <aleksej.makarov@sonymobile.com>
Signed-off-by: Oskar Andero <oskar.andero@sonymobile.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-16 02:19:10 -08:00
Dmitry Torokhov
42249094f7 Merge branch 'next' into for-linus
Merge first round of changes for 3.13 merge window.
2013-11-14 17:38:05 -08:00
Kang Hu
95079b8aa8 Input: remove a redundant max() call
dev->hint_events_per_packet is guaranteed to be >= packet_size.
so an extra max() call is not needed.

Signed-off-by: Kang Hu <hukangustc@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-31 08:46:07 -07:00
David Herrmann
a60a71b035 Input: move name/timer init to input_alloc_dev()
We want to allow drivers to call input_event() at any time after the
device got allocated. This means input_event() and input_register_device()
must be allowed to run in parallel.

The only conflicting calls in input_register_device() are init_timer() and
dev_set_name(). Both can safely be moved to device allocation and we're
good to go.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-06 01:23:26 -07:00
Dmitry Torokhov
b666263b71 Input: document that unregistering managed devices is not necessary
Apparently some users of managed input devices are confused whether
input_unregister_device() is needed when working with them. Clarify
this in the kernel doc for devm_input_allocate_device(): in most cases
there is no need to call neither input_unregister_device() nor
input_free_device() when working with managed devices.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-01-09 09:07:56 -08:00
Dmitry Torokhov
2be975c6d9 Input: introduce managed input devices (add devres support)
There is a demand from driver's writers to use managed devices framework
for their drivers. Unfortunately up to this moment input devices did not
provide support for managed devices and that lead to mixing two styles
of resource management which usually introduced more bugs, such as
manually unregistering input device but relying in devres to free
interrupt handler which (unless device is properly shut off) can cause
ISR to reference already freed memory.

This change introduces devm_input_allocate_device() that will allocate
managed instance of input device so that driver writers who prefer
using devm_* framework do not have to mix 2 styles.

Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-08 09:10:05 -08:00
Dmitry Torokhov
adc4633c86 Input: fix sparse warning in __input_release_device()
This fixes the following warning:
drivers/input/input.c:538:23: error: incompatible types in comparison expression (different address spaces)

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-25 00:12:01 -07:00
Dmitry Torokhov
7f8d4cad1e Input: extend the number of event (and other) devices
Extend the amount of character devices, such as eventX, mouseX and jsX,
from a hard limit of 32 per input handler to about 1024 shared across
all handlers.

To be compatible with legacy installations input handlers will start
creating char devices with minors in their legacy range, however once
legacy range is exhausted they will start allocating minors from the
dynamic range 256-1024.

Reviewed-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-08 09:37:55 -07:00