This patch refactored target bpf_iter_init_seq_priv_t callback
function to accept additional information. This will be needed
in later patches for map element targets since a particular
map should be passed to traverse elements for that particular
map. In the future, other information may be passed to target
as well, e.g., pid, cgroup id, etc. to customize the iterator.
Change-Id: Ie4194ce07d7cd10e1da29186ff8c286d3030a4f3
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200723184110.590156-1-yhs@fb.com
This patch added netlink and ipv6_route targets, using
the same seq_ops (except show() and minor changes for stop())
for /proc/net/{netlink,ipv6_route}.
The net namespace for these targets are the current net
namespace at file open stage, similar to
/proc/net/{netlink,ipv6_route} reference counting
the net namespace at seq_file open stage.
Since module is not supported for now, ipv6_route is
supported only if the IPV6 is built-in, i.e., not compiled
as a module. The restriction can be lifted once module
is properly supported for bpf_iter.
Change-Id: Id907ac146e81197abd185e0d6b7431d176dca355
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175910.2476329-1-yhs@fb.com
Changes in 4.19.270
mm/khugepaged: fix GUP-fast interaction by sending IPI
mm/khugepaged: invoke MMU notifiers in shmem/file collapse paths
block: unhash blkdev part inode when the part is deleted
nfp: fix use-after-free in area_cache_get()
ASoC: ops: Check bounds for second channel in snd_soc_put_volsw_sx()
pinctrl: meditatek: Startup with the IRQs disabled
can: sja1000: fix size of OCR_MODE_MASK define
can: mcba_usb: Fix termination command argument
ASoC: ops: Correct bounds check for second channel on SX controls
perf script python: Remove explicit shebang from tests/attr.c
udf: Discard preallocation before extending file with a hole
udf: Fix preallocation discarding at indirect extent boundary
udf: Do not bother looking for prealloc extents if i_lenExtents matches i_size
udf: Fix extending file within last block
usb: gadget: uvc: Prevent buffer overflow in setup handler
USB: serial: option: add Quectel EM05-G modem
USB: serial: cp210x: add Kamstrup RF sniffer PIDs
USB: serial: f81534: fix division by zero on line-speed change
igb: Initialize mailbox message for VF reset
Bluetooth: L2CAP: Fix u8 overflow
net: loopback: use NET_NAME_PREDICTABLE for name_assign_type
usb: musb: remove extra check in musb_gadget_vbus_draw
ARM: dts: qcom: apq8064: fix coresight compatible
drivers: soc: ti: knav_qmss_queue: Mark knav_acc_firmwares as static
arm: dts: spear600: Fix clcd interrupt
soc: ti: smartreflex: Fix PM disable depth imbalance in omap_sr_probe
perf: arm_dsu: Fix hotplug callback leak in dsu_pmu_init()
arm64: dts: mt2712e: Fix unit_address_vs_reg warning for oscillators
arm64: dts: mt2712e: Fix unit address for pinctrl node
arm64: dts: mt2712-evb: Fix vproc fixed regulators unit names
arm64: dts: mediatek: mt6797: Fix 26M oscillator unit name
ARM: dts: dove: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-370: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-xp: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-375: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-38x: Fix assigned-addresses for every PCIe Root Port
ARM: dts: armada-39x: Fix assigned-addresses for every PCIe Root Port
ARM: dts: turris-omnia: Add ethernet aliases
ARM: dts: turris-omnia: Add switch port 6 node
pstore/ram: Fix error return code in ramoops_probe()
ARM: mmp: fix timer_read delay
pstore: Avoid kcore oops by vmap()ing with VM_IOREMAP
tpm/tpm_crb: Fix error message in __crb_relinquish_locality()
cpuidle: dt: Return the correct numbers of parsed idle states
alpha: fix syscall entry in !AUDUT_SYSCALL case
fs: don't audit the capability check in simple_xattr_list()
selftests/ftrace: event_triggers: wait longer for test_event_enable
perf: Fix possible memleak in pmu_dev_alloc()
timerqueue: Use rb_entry_safe() in timerqueue_getnext()
proc: fixup uptime selftest
ocfs2: fix memory leak in ocfs2_stack_glue_init()
MIPS: vpe-mt: fix possible memory leak while module exiting
MIPS: vpe-cmp: fix possible memory leak while module exiting
PNP: fix name memory leak in pnp_alloc_dev()
perf/x86/intel/uncore: Fix reference count leak in hswep_has_limit_sbox()
irqchip: gic-pm: Use pm_runtime_resume_and_get() in gic_probe()
cpufreq: amd_freq_sensitivity: Add missing pci_dev_put()
libfs: add DEFINE_SIMPLE_ATTRIBUTE_SIGNED for signed value
lib/notifier-error-inject: fix error when writing -errno to debugfs file
debugfs: fix error when writing negative value to atomic_t debugfs file
rapidio: fix possible name leaks when rio_add_device() fails
rapidio: rio: fix possible name leak in rio_register_mport()
clocksource/drivers/sh_cmt: Make sure channel clock supply is enabled
ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
uprobes/x86: Allow to probe a NOP instruction with 0x66 prefix
xen/events: only register debug interrupt for 2-level events
x86/xen: Fix memory leak in xen_smp_intr_init{_pv}()
x86/xen: Fix memory leak in xen_init_lock_cpu()
xen/privcmd: Fix a possible warning in privcmd_ioctl_mmap_resource()
PM: runtime: Improve path in rpm_idle() when no callback
PM: runtime: Do not call __rpm_callback() from rpm_idle()
platform/x86: mxm-wmi: fix memleak in mxm_wmi_call_mx[ds|mx]()
MIPS: BCM63xx: Add check for NULL for clk in clk_enable
fs: sysv: Fix sysv_nblocks() returns wrong value
rapidio: fix possible UAF when kfifo_alloc() fails
eventfd: change int to __u64 in eventfd_signal() ifndef CONFIG_EVENTFD
relay: fix type mismatch when allocating memory in relay_create_buf()
hfs: Fix OOB Write in hfs_asc2mac
rapidio: devices: fix missing put_device in mport_cdev_open
wifi: ath9k: hif_usb: fix memory leak of urbs in ath9k_hif_usb_dealloc_tx_urbs()
wifi: ath9k: hif_usb: Fix use-after-free in ath9k_hif_usb_reg_in_cb()
wifi: rtl8xxxu: Fix reading the vendor of combo chips
pata_ipx4xx_cf: Fix unsigned comparison with less than zero
media: i2c: ad5820: Fix error path
can: kvaser_usb: do not increase tx statistics when sending error message frames
can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device
can: kvaser_usb: kvaser_usb_leaf: Rename {leaf,usbcan}_cmd_error_event to {leaf,usbcan}_cmd_can_error_event
can: kvaser_usb: kvaser_usb_leaf: Handle CMD_ERROR_EVENT
can: kvaser_usb_leaf: Set Warning state even without bus errors
can: kvaser_usb_leaf: Fix improved state not being reported
can: kvaser_usb_leaf: Fix wrong CAN state after stopping
can: kvaser_usb_leaf: Fix bogus restart events
can: kvaser_usb: Add struct kvaser_usb_busparams
can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming
spi: Update reference to struct spi_controller
media: vivid: fix compose size exceed boundary
mtd: Fix device name leak when register device failed in add_mtd_device()
wifi: rsi: Fix handling of 802.3 EAPOL frames sent via control port
media: camss: Clean up received buffers on failed start of streaming
net, proc: Provide PROC_FS=n fallback for proc_create_net_single_write()
drm/radeon: Add the missed acpi_put_table() to fix memory leak
ASoC: pxa: fix null-pointer dereference in filter()
regulator: core: fix unbalanced of node refcount in regulator_dev_lookup()
ima: Fix misuse of dereference of pointer in template_desc_init_fields()
wifi: ath10k: Fix return value in ath10k_pci_init()
mtd: lpddr2_nvm: Fix possible null-ptr-deref
Input: elants_i2c - properly handle the reset GPIO when power is off
media: solo6x10: fix possible memory leak in solo_sysfs_init()
media: platform: exynos4-is: Fix error handling in fimc_md_init()
HID: hid-sensor-custom: set fixed size for custom attributes
ALSA: seq: fix undefined behavior in bit shift for SNDRV_SEQ_FILTER_USE_EVENT
clk: rockchip: Fix memory leak in rockchip_clk_register_pll()
bonding: Export skip slave logic to function
mtd: maps: pxa2xx-flash: fix memory leak in probe
drbd: remove call to memset before free device/resource/connection
media: imon: fix a race condition in send_packet()
pinctrl: pinconf-generic: add missing of_node_put()
media: dvb-core: Fix ignored return value in dvb_register_frontend()
media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()
media: s5p-mfc: Add variant data for MFC v7 hardware for Exynos 3250 SoC
drm/tegra: Add missing clk_disable_unprepare() in tegra_dc_probe()
NFSv4.2: Fix a memory stomp in decode_attr_security_label
NFSv4: Fix a deadlock between nfs4_open_recover_helper() and delegreturn
ALSA: asihpi: fix missing pci_disable_device()
drm/radeon: Fix PCI device refcount leak in radeon_atrm_get_bios()
drm/amdgpu: Fix PCI device refcount leak in amdgpu_atrm_get_bios()
ASoC: pcm512x: Fix PM disable depth imbalance in pcm512x_probe
bonding: uninitialized variable in bond_miimon_inspect()
wifi: cfg80211: Fix not unregister reg_pdev when load_builtin_regdb_keys() fails
regulator: core: fix module refcount leak in set_supply()
media: saa7164: fix missing pci_disable_device()
ALSA: mts64: fix possible null-ptr-defer in snd_mts64_interrupt
SUNRPC: Fix missing release socket in rpc_sockname()
NFSv4.x: Fail client initialisation if state manager thread can't run
mmc: moxart: fix return value check of mmc_add_host()
mmc: mxcmmc: fix return value check of mmc_add_host()
mmc: rtsx_usb_sdmmc: fix return value check of mmc_add_host()
mmc: toshsd: fix return value check of mmc_add_host()
mmc: vub300: fix return value check of mmc_add_host()
mmc: wmt-sdmmc: fix return value check of mmc_add_host()
mmc: atmel-mci: fix return value check of mmc_add_host()
mmc: meson-gx: fix return value check of mmc_add_host()
mmc: via-sdmmc: fix return value check of mmc_add_host()
mmc: wbsd: fix return value check of mmc_add_host()
mmc: mmci: fix return value check of mmc_add_host()
media: c8sectpfe: Add of_node_put() when breaking out of loop
media: coda: Add check for dcoda_iram_alloc
media: coda: Add check for kmalloc
clk: samsung: Fix memory leak in _samsung_clk_register_pll()
wifi: rtl8xxxu: Add __packed to struct rtl8723bu_c2h
rtl8xxxu: add enumeration for channel bandwidth
wifi: brcmfmac: Fix error return code in brcmf_sdio_download_firmware()
blktrace: Fix output non-blktrace event when blk_classic option enabled
clk: socfpga: clk-pll: Remove unused variable 'rc'
clk: socfpga: use clk_hw_register for a5/c5
net: vmw_vsock: vmci: Check memcpy_from_msg()
net: defxx: Fix missing err handling in dfx_init()
drivers: net: qlcnic: Fix potential memory leak in qlcnic_sriov_init()
ethernet: s2io: don't call dev_kfree_skb() under spin_lock_irqsave()
net: farsync: Fix kmemleak when rmmods farsync
net/tunnel: wait until all sk_user_data reader finish before releasing the sock
net: apple: mace: don't call dev_kfree_skb() under spin_lock_irqsave()
net: apple: bmac: don't call dev_kfree_skb() under spin_lock_irqsave()
net: emaclite: don't call dev_kfree_skb() under spin_lock_irqsave()
net: ethernet: dnet: don't call dev_kfree_skb() under spin_lock_irqsave()
hamradio: don't call dev_kfree_skb() under spin_lock_irqsave()
net: amd: lance: don't call dev_kfree_skb() under spin_lock_irqsave()
net: amd-xgbe: Fix logic around active and passive cables
net: amd-xgbe: Check only the minimum speed for active/passive cables
net: lan9303: Fix read error execution path
ntb_netdev: Use dev_kfree_skb_any() in interrupt context
Bluetooth: btusb: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_qca: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_h5: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_bcsp: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_core: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: RFCOMM: don't call kfree_skb() under spin_lock_irqsave()
stmmac: fix potential division by 0
apparmor: fix a memleak in multi_transaction_new()
apparmor: fix lockdep warning when removing a namespace
apparmor: Fix abi check to include v8 abi
f2fs: fix normal discard process
RDMA/nldev: Return "-EAGAIN" if the cm_id isn't from expected port
scsi: scsi_debug: Fix a warning in resp_write_scat()
PCI: Check for alloc failure in pci_request_irq()
RDMA/hfi: Decrease PCI device reference count in error path
crypto: ccree - Make cc_debugfs_global_fini() available for module init function
RDMA/rxe: Fix NULL-ptr-deref in rxe_qp_do_cleanup() when socket create failed
scsi: hpsa: use local workqueues instead of system workqueues
scsi: hpsa: Fix possible memory leak in hpsa_init_one()
crypto: tcrypt - Fix multibuffer skcipher speed test mem leak
scsi: hpsa: Fix error handling in hpsa_add_sas_host()
scsi: hpsa: Fix possible memory leak in hpsa_add_sas_device()
scsi: fcoe: Fix possible name leak when device_register() fails
scsi: ipr: Fix WARNING in ipr_init()
scsi: fcoe: Fix transport not deattached when fcoe_if_init() fails
scsi: snic: Fix possible UAF in snic_tgt_create()
RDMA/hfi1: Fix error return code in parse_platform_config()
orangefs: Fix sysfs not cleanup when dev init failed
crypto: img-hash - Fix variable dereferenced before check 'hdev->req'
hwrng: amd - Fix PCI device refcount leak
hwrng: geode - Fix PCI device refcount leak
IB/IPoIB: Fix queue count inconsistency for PKEY child interfaces
drivers: dio: fix possible memory leak in dio_init()
serial: tegra: avoid reg access when clk disabled
serial: tegra: check for FIFO mode enabled status
serial: tegra: set maximum num of uart ports to 8
serial: tegra: add support to use 8 bytes trigger
serial: tegra: add support to adjust baud rate
serial: tegra: report clk rate errors
serial: tegra: Add PIO mode support
tty: serial: tegra: Activate RX DMA transfer by request
serial: tegra: Read DMA status before terminating
class: fix possible memory leak in __class_register()
vfio: platform: Do not pass return buffer to ACPI _RST method
uio: uio_dmem_genirq: Fix missing unlock in irq configuration
uio: uio_dmem_genirq: Fix deadlock between irq config and handling
usb: fotg210-udc: Fix ages old endianness issues
staging: vme_user: Fix possible UAF in tsi148_dma_list_add
usb: typec: Check for ops->exit instead of ops->enter in altmode_exit
serial: amba-pl011: avoid SBSA UART accessing DMACR register
serial: pl011: Do not clear RX FIFO & RX interrupt in unthrottle.
serial: pch: Fix PCI device refcount leak in pch_request_dma()
tty: serial: clean up stop-tx part in altera_uart_tx_chars()
tty: serial: altera_uart_{r,t}x_chars() need only uart_port
serial: altera_uart: fix locking in polling mode
serial: sunsab: Fix error handling in sunsab_init()
test_firmware: fix memory leak in test_firmware_init()
misc: tifm: fix possible memory leak in tifm_7xx1_switch_media()
misc: sgi-gru: fix use-after-free error in gru_set_context_option, gru_fault and gru_handle_user_call_os
cxl: fix possible null-ptr-deref in cxl_guest_init_afu|adapter()
cxl: fix possible null-ptr-deref in cxl_pci_init_afu|adapter()
usb: gadget: f_hid: optional SETUP/SET_REPORT mode
usb: gadget: f_hid: fix f_hidg lifetime vs cdev
usb: gadget: f_hid: fix refcount leak on error path
drivers: mcb: fix resource leak in mcb_probe()
mcb: mcb-parse: fix error handing in chameleon_parse_gdd()
chardev: fix error handling in cdev_device_add()
i2c: pxa-pci: fix missing pci_disable_device() on error in ce4100_i2c_probe
staging: rtl8192u: Fix use after free in ieee80211_rx()
staging: rtl8192e: Fix potential use-after-free in rtllib_rx_Monitor()
vme: Fix error not catched in fake_init()
i2c: ismt: Fix an out-of-bounds bug in ismt_access()
usb: storage: Add check for kcalloc
tracing/hist: Fix issue of losting command info in error_log
samples: vfio-mdev: Fix missing pci_disable_device() in mdpy_fb_probe()
fbdev: ssd1307fb: Drop optional dependency
fbdev: pm2fb: fix missing pci_disable_device()
fbdev: via: Fix error in via_core_init()
fbdev: vermilion: decrease reference count in error path
fbdev: uvesafb: Fixes an error handling path in uvesafb_probe()
HSI: omap_ssi_core: fix unbalanced pm_runtime_disable()
HSI: omap_ssi_core: fix possible memory leak in ssi_probe()
power: supply: fix residue sysfs file in error handle route of __power_supply_register()
perf symbol: correction while adjusting symbol
HSI: omap_ssi_core: Fix error handling in ssi_init()
include/uapi/linux/swab: Fix potentially missing __always_inline
rtc: snvs: Allow a time difference on clock register read
iommu/amd: Fix pci device refcount leak in ppr_notifier()
iommu/fsl_pamu: Fix resource leak in fsl_pamu_probe()
macintosh: fix possible memory leak in macio_add_one_device()
macintosh/macio-adb: check the return value of ioremap()
powerpc/52xx: Fix a resource leak in an error handling path
cxl: Fix refcount leak in cxl_calc_capp_routing
powerpc/xive: add missing iounmap() in error path in xive_spapr_populate_irq_data()
powerpc/perf: callchain validate kernel stack pointer bounds
powerpc/83xx/mpc832x_rdb: call platform_device_put() in error case in of_fsl_spi_probe()
powerpc/hv-gpci: Fix hv_gpci event list
selftests/powerpc: Fix resource leaks
rtc: st-lpc: Add missing clk_disable_unprepare in st_rtc_probe()
nfsd: under NFSv4.1, fix double svc_xprt_put on rpc_create failure
mISDN: hfcsusb: don't call dev_kfree_skb/kfree_skb() under spin_lock_irqsave()
mISDN: hfcpci: don't call dev_kfree_skb/kfree_skb() under spin_lock_irqsave()
mISDN: hfcmulti: don't call dev_kfree_skb/kfree_skb() under spin_lock_irqsave()
nfc: pn533: Clear nfc_target before being used
r6040: Fix kmemleak in probe and remove
rtc: mxc_v2: Add missing clk_disable_unprepare()
openvswitch: Fix flow lookup to use unmasked key
skbuff: Account for tail adjustment during pull operations
net_sched: reject TCF_EM_SIMPLE case for complex ematch module
rxrpc: Fix missing unlock in rxrpc_do_sendmsg()
myri10ge: Fix an error handling path in myri10ge_probe()
net: stream: purge sk_error_queue in sk_stream_kill_queues()
binfmt_misc: fix shift-out-of-bounds in check_special_flags
fs: jfs: fix shift-out-of-bounds in dbAllocAG
udf: Avoid double brelse() in udf_rename()
fs: jfs: fix shift-out-of-bounds in dbDiscardAG
ACPICA: Fix error code path in acpi_ds_call_control_method()
nilfs2: fix shift-out-of-bounds/overflow in nilfs_sb2_bad_offset()
acct: fix potential integer overflow in encode_comp_t()
hfs: fix OOB Read in __hfs_brec_find
wifi: ath9k: verify the expected usb_endpoints are present
wifi: ar5523: Fix use-after-free on ar5523_cmd() timed out
ASoC: codecs: rt298: Add quirk for KBL-R RVP platform
ipmi: fix memleak when unload ipmi driver
bpf: make sure skb->len != 0 when redirecting to a tunneling device
net: ethernet: ti: Fix return type of netcp_ndo_start_xmit()
hamradio: baycom_epp: Fix return type of baycom_send_packet()
wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request()
igb: Do not free q_vector unless new one was allocated
drm/amdgpu: Fix type of second parameter in trans_msg() callback
s390/ctcm: Fix return type of ctc{mp,}m_tx()
s390/netiucv: Fix return type of netiucv_tx()
s390/lcs: Fix return type of lcs_start_xmit()
drm/sti: Use drm_mode_copy()
drivers/md/md-bitmap: check the return value of md_bitmap_get_counter()
md/raid1: stop mdx_raid1 thread when raid1 array run failed
mrp: introduce active flags to prevent UAF when applicant uninit
ppp: associate skb with a device at tx
media: dvb-frontends: fix leak of memory fw
media: dvbdev: adopts refcnt to avoid UAF
media: dvb-usb: fix memory leak in dvb_usb_adapter_init()
blk-mq: fix possible memleak when register 'hctx' failed
regulator: core: fix use_count leakage when handling boot-on
mmc: f-sdh30: Add quirks for broken timeout clock capability
media: si470x: Fix use-after-free in si470x_int_in_callback()
clk: st: Fix memory leak in st_of_quadfs_setup()
drm/fsl-dcu: Fix return type of fsl_dcu_drm_connector_mode_valid()
drm/sti: Fix return type of sti_{dvo,hda,hdmi}_connector_mode_valid()
orangefs: Fix kmemleak in orangefs_prepare_debugfs_help_string()
ASoC: mediatek: mt8173-rt5650-rt5514: fix refcount leak in mt8173_rt5650_rt5514_dev_probe()
ASoC: rockchip: pdm: Add missing clk_disable_unprepare() in rockchip_pdm_runtime_resume()
ASoC: wm8994: Fix potential deadlock
ASoC: rockchip: spdif: Add missing clk_disable_unprepare() in rk_spdif_runtime_resume()
ASoC: rt5670: Remove unbalanced pm_runtime_put()
pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion
pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES
usb: dwc3: core: defer probe on ulpi_read_id timeout
HID: wacom: Ensure bootloader PID is usable in hidraw mode
reiserfs: Add missing calls to reiserfs_security_free()
iio: adc: ad_sigma_delta: do not use internal iio_dev lock
gcov: add support for checksum field
media: dvbdev: fix build warning due to comments
media: dvbdev: fix refcnt bug
ata: ahci: Fix PCS quirk application for suspend
powerpc/rtas: avoid device tree lookups in rtas_os_term()
powerpc/rtas: avoid scheduling in rtas_os_term()
HID: plantronics: Additional PIDs for double volume key presses quirk
hfsplus: fix bug causing custom uid and gid being unable to be assigned with mount
ovl: Use ovl mounter's fsuid and fsgid in ovl_link()
ALSA: line6: correct midi status byte when receiving data from podxt
ALSA: line6: fix stack overflow in line6_midi_transmit
pnode: terminate at peers of source
md: fix a crash in mempool_free
mmc: vub300: fix warning - do not call blocking ops when !TASK_RUNNING
tpm: tpm_crb: Add the missed acpi_put_table() to fix memory leak
tpm: tpm_tis: Add the missed acpi_put_table() to fix memory leak
SUNRPC: Don't leak netobj memory when gss_read_proxy_verf() fails
media: stv0288: use explicitly signed char
soc: qcom: Select REMAP_MMIO for LLCC driver
ktest.pl minconfig: Unset configs instead of just removing them
ARM: ux500: do not directly dereference __iomem
selftests: Use optional USERCFLAGS and USERLDFLAGS
binfmt: Move install_exec_creds after setup_new_exec to match binfmt_elf
binfmt: Fix error return code in load_elf_fdpic_binary()
dm cache: Fix ABBA deadlock between shrink_slab and dm_cache_metadata_abort
dm thin: Use last transaction's pmd->root when commit failed
dm thin: Fix UAF in run_timer_softirq()
dm cache: Fix UAF in destroy()
dm cache: set needs_check flag after aborting metadata
x86/microcode/intel: Do not retry microcode reloading on the APs
tracing: Fix infinite loop in tracing_read_pipe on overflowed print_trace_line
ARM: 9256/1: NWFPE: avoid compiler-generated __aeabi_uldivmod
media: dvb-core: Fix double free in dvb_register_device()
media: dvb-core: Fix UAF due to refcount races at releasing
cifs: fix confusing debug message
md/bitmap: Fix bitmap chunk size overflow issues
ipmi: fix long wait in unload when IPMI disconnect
ima: Fix a potential NULL pointer access in ima_restore_measurement_list
ipmi: fix use after free in _ipmi_destroy_user()
PCI: Fix pci_device_is_present() for VFs by checking PF
PCI/sysfs: Fix double free in error path
crypto: n2 - add missing hash statesize
iommu/amd: Fix ivrs_acpihid cmdline parsing code
parisc: led: Fix potential null-ptr-deref in start_task()
device_cgroup: Roll back to original exceptions after copy failure
drm/connector: send hotplug uevent on connector cleanup
drm/vmwgfx: Validate the box size for the snooped cursor
ext4: add inode table check in __ext4_get_inode_loc to aovid possible infinite loop
ext4: fix undefined behavior in bit shift for ext4_check_flag_values
ext4: add helper to check quota inums
ext4: fix bug_on in __es_tree_search caused by bad boot loader inode
ext4: init quota for 'old.inode' in 'ext4_rename'
ext4: fix corruption when online resizing a 1K bigalloc fs
ext4: fix error code return to user-space in ext4_get_branch()
ext4: avoid BUG_ON when creating xattrs
ext4: fix inode leak in ext4_xattr_inode_create() on an error path
ext4: initialize quota before expanding inode in setproject ioctl
ext4: avoid unaccounted block allocation when expanding inode
ext4: allocate extended attribute value in vmalloc area
btrfs: send: avoid unnecessary backref lookups when finding clone source
btrfs: replace strncpy() with strscpy()
media: s5p-mfc: Fix to handle reference queue during finishing
media: s5p-mfc: Clear workbit to handle error condition
media: s5p-mfc: Fix in register read and write for H264
dm thin: resume even if in FAIL mode
perf probe: Use dwarf_attr_integrate as generic DWARF attr accessor
perf probe: Fix to get the DW_AT_decl_file and DW_AT_call_file as unsinged data
ravb: Fix "failed to switch device to config mode" message during unbind
driver core: Set deferred_probe_timeout to a longer default if CONFIG_MODULES is set
ext4: goto right label 'failed_mount3a'
ext4: correct inconsistent error msg in nojournal mode
ext4: use kmemdup() to replace kmalloc + memcpy
mbcache: don't reclaim used entries
mbcache: add functions to delete entry if unused
ext4: remove EA inode entry from mbcache on inode eviction
ext4: unindent codeblock in ext4_xattr_block_set()
ext4: fix race when reusing xattr blocks
mbcache: automatically delete entries from cache on freeing
ext4: fix deadlock due to mbcache entry corruption
SUNRPC: ensure the matching upcall is in-flight upon downcall
bpf: pull before calling skb_postpull_rcsum()
qlcnic: prevent ->dcb use-after-free on qlcnic_dcb_enable() failure
nfc: Fix potential resource leaks
net: amd-xgbe: add missed tasklet_kill
net: phy: xgmiitorgmii: Fix refcount leak in xgmiitorgmii_probe
RDMA/mlx5: Fix validation of max_rd_atomic caps for DC
net: sched: atm: dont intepret cls results when asked to drop
usb: rndis_host: Secure rndis_query check against int overflow
caif: fix memory leak in cfctrl_linkup_request()
udf: Fix extension of the last extent in the file
ASoC: Intel: bytcr_rt5640: Add quirk for the Advantech MICA-071 tablet
x86/bugs: Flush IBP in ib_prctl_set()
nfsd: fix handling of readdir in v4root vs. mount upcall timeout
riscv: uaccess: fix type of 0 variable on error in get_user()
ext4: don't allow journal inode to have encrypt flag
hfs/hfsplus: use WARN_ON for sanity check
hfs/hfsplus: avoid WARN_ON() for sanity check, use proper error handling
mbcache: Avoid nesting of cache->c_list_lock under bit locks
parisc: Align parisc MADV_XXX constants with all other architectures
driver core: Fix bus_type.match() error handling in __driver_attach()
net: sched: disallow noqueue for qdisc classes
docs: Fix the docs build with Sphinx 6.0
perf auxtrace: Fix address filter duplicate symbol selection
s390/percpu: add READ_ONCE() to arch_this_cpu_to_op_simple()
net/ulp: prevent ULP without clone op from entering the LISTEN status
ALSA: pcm: Move rwsem lock inside snd_ctl_elem_read to prevent UAF
cifs: Fix uninitialized memory read for smb311 posix symlink create
platform/x86: sony-laptop: Don't turn off 0x153 keyboard backlight during probe
ipv6: raw: Deduct extension header length in rawv6_push_pending_frames
wifi: wilc1000: sdio: fix module autoloading
ALSA: hda/hdmi: fix failures at PCM open on Intel ICL and later
ktest: Add support for meta characters in GRUB_MENU
ktest: introduce _get_grub_index
ktest: cleanup get_grub_index
ktest: introduce grub2bls REBOOT_TYPE option
ktest.pl: Fix incorrect reboot for grub2bls
kest.pl: Fix grub2 menu handling for rebooting
usb: ulpi: defer ulpi_register on ulpi_read_id timeout
quota: Factor out setup of quota inode
ext4: fix bug_on in __es_tree_search caused by bad quota inode
ext4: lost matching-pair of trace in ext4_truncate
ext4: fix use-after-free in ext4_orphan_cleanup
ext4: fix uninititialized value in 'ext4_evict_inode'
ext4: generalize extents status tree search functions
ext4: add new pending reservation mechanism
ext4: fix reserved cluster accounting at delayed write time
ext4: fix delayed allocation bug in ext4_clu_mapped for bigalloc + inline
netfilter: ipset: Fix overflow before widen in the bitmap_ip_create() function.
x86/boot: Avoid using Intel mnemonics in AT&T syntax asm
EDAC/device: Fix period calculation in edac_device_reset_delay_period()
regulator: da9211: Use irq handler when ready
hvc/xen: lock console list traversal
nfc: pn533: Wait for out_urb's completion in pn533_usb_send_frame()
net/mlx5: Rename ptp clock info
net/mlx5: Fix ptp max frequency adjustment range
iommu/mediatek-v1: Add error handle for mtk_iommu_probe
iommu/mediatek-v1: Fix an error handling path in mtk_iommu_v1_probe()
x86/resctrl: Use task_curr() instead of task_struct->on_cpu to prevent unnecessary IPI
x86/resctrl: Fix task CLOSID/RMID update race
drm/virtio: Fix GEM handle creation UAF
arm64: cmpxchg_double*: hazard against entire exchange variable
efi: fix NULL-deref in init error path
Revert "usb: ulpi: defer ulpi_register on ulpi_read_id timeout"
tty: serial: tegra: Handle RX transfer in PIO mode if DMA wasn't started
serial: tegra: Only print FIFO error message when an error occurs
serial: tegra: Change lower tolerance baud rate limit for tegra20 and tegra30
Linux 4.19.270
Change-Id: Ieb5e7f318a7e06effcc51e5f93751ec02dbb50c4
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Changes in 4.19.167
kbuild: don't hardcode depmod path
workqueue: Kick a worker based on the actual activation of delayed works
scsi: ufs: Fix wrong print message in dev_err()
scsi: ufs-pci: Ensure UFS device is in PowerDown mode for suspend-to-disk ->poweroff()
scsi: ide: Do not set the RQF_PREEMPT flag for sense requests
scsi: scsi_transport_spi: Set RQF_PM for domain validation commands
lib/genalloc: fix the overflow when size is too big
depmod: handle the case of /sbin/depmod without /sbin in PATH
proc: change ->nlink under proc_subdir_lock
proc: fix lookup in /proc/net subdirectories after setns(2)
i40e: Fix Error I40E_AQ_RC_EINVAL when removing VFs
net: mvpp2: Add TCAM entry to drop flow control pause frames
net: mvpp2: prs: fix PPPoE with ipv6 packet parse
ethernet: ucc_geth: fix use-after-free in ucc_geth_remove()
ethernet: ucc_geth: set dev->max_mtu to 1518
atm: idt77252: call pci_disable_device() on error path
net: mvpp2: Fix GoP port 3 Networking Complex Control configurations
qede: fix offload for IPIP tunnel packets
virtio_net: Fix recursive call to cpus_read_lock()
net/ncsi: Use real net-device for response handler
net: ethernet: Fix memleak in ethoc_probe
net-sysfs: take the rtnl lock when storing xps_cpus
net-sysfs: take the rtnl lock when accessing xps_cpus_map and num_tc
net: ethernet: ti: cpts: fix ethtool output when no ptp_clock registered
tun: fix return value when the number of iovs exceeds MAX_SKB_FRAGS
ipv4: Ignore ECN bits for fib lookups in fib_compute_spec_dst()
net: hns: fix return value check in __lb_other_process()
erspan: fix version 1 check in gre_parse_header()
net: hdlc_ppp: Fix issues when mod_timer is called while timer is running
CDC-NCM: remove "connected" log message
net: usb: qmi_wwan: add Quectel EM160R-GL
r8169: work around power-saving bug on some chip versions
vhost_net: fix ubuf refcount incorrectly when sendmsg fails
net: sched: prevent invalid Scell_log shift count
net-sysfs: take the rtnl lock when storing xps_rxqs
net-sysfs: take the rtnl lock when accessing xps_rxqs_map and num_tc
net: systemport: set dev->max_mtu to UMAC_MAX_MTU_SIZE
Bluetooth: revert: hci_h5: close serdev device and free hu in h5_close
video: hyperv_fb: Fix the mmap() regression for v5.4.y and older
crypto: ecdh - avoid buffer overflow in ecdh_set_secret()
staging: mt7621-dma: Fix a resource leak in an error handling path
usb: gadget: enable super speed plus
USB: cdc-acm: blacklist another IR Droid device
USB: cdc-wdm: Fix use after free in service_outstanding_interrupt().
usb: dwc3: ulpi: Use VStsDone to detect PHY regs access completion
usb: chipidea: ci_hdrc_imx: add missing put_device() call in usbmisc_get_init_data()
USB: xhci: fix U1/U2 handling for hardware with XHCI_INTEL_HOST quirk set
usb: usbip: vhci_hcd: protect shift size
usb: uas: Add PNY USB Portable SSD to unusual_uas
USB: serial: iuu_phoenix: fix DMA from stack
USB: serial: option: add LongSung M5710 module support
USB: serial: option: add Quectel EM160R-GL
USB: yurex: fix control-URB timeout handling
USB: usblp: fix DMA to stack
ALSA: usb-audio: Fix UBSAN warnings for MIDI jacks
usb: gadget: select CONFIG_CRC32
usb: gadget: f_uac2: reset wMaxPacketSize
usb: gadget: function: printer: Fix a memory leak for interface descriptor
usb: gadget: u_ether: Fix MTU size mismatch with RX packet size
USB: gadget: legacy: fix return error code in acm_ms_bind()
usb: gadget: Fix spinlock lockup on usb_function_deactivate
usb: gadget: configfs: Preserve function ordering after bind failure
usb: gadget: configfs: Fix use-after-free issue with udc_name
USB: serial: keyspan_pda: remove unused variable
x86/mm: Fix leak of pmd ptlock
ALSA: hda/via: Fix runtime PM for Clevo W35xSS
ALSA: hda/conexant: add a new hda codec CX11970
ALSA: hda/realtek - Fix speaker volume control on Lenovo C940
btrfs: send: fix wrong file path when there is an inode with a pending rmdir
Revert "device property: Keep secondary firmware node secondary by type"
xen/pvh: correctly setup the PV EFI interface for dom0
netfilter: x_tables: Update remaining dereference to RCU
netfilter: ipset: fix shift-out-of-bounds in htable_bits()
netfilter: xt_RATEEST: reject non-null terminated string from userspace
x86/mtrr: Correct the range check before performing MTRR type lookups
KVM: x86: fix shift out of bounds reported by UBSAN
scsi: target: Fix XCOPY NAA identifier lookup
Linux 4.19.167
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Id204bcc705c98d3344f33de84431cc7ca0868246
[ Upstream commit c6c75deda81344c3a95d1d1f606d5cee109e5d54 ]
Commit 1fde6f21d90f ("proc: fix /proc/net/* after setns(2)") only forced
revalidation of regular files under /proc/net/
However, /proc/net/ is unusual in the sense of /proc/net/foo handlers
take netns pointer from parent directory which is old netns.
Steps to reproduce:
(void)open("/proc/net/sctp/snmp", O_RDONLY);
unshare(CLONE_NEWNET);
int fd = open("/proc/net/sctp/snmp", O_RDONLY);
read(fd, &c, 1);
Read will read wrong data from original netns.
Patch forces lookup on every directory under /proc/net .
Link: https://lkml.kernel.org/r/20201205160916.GA109739@localhost.localdomain
Fixes: 1da4d377f9 ("proc: revalidate misc dentries")
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reported-by: "Rantala, Tommi T. (Nokia - FI/Espoo)" <tommi.t.rantala@nokia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
The kill() syscall operates on process identifiers (pid). After a process
has exited its pid can be reused by another process. If a caller sends a
signal to a reused pid it will end up signaling the wrong process. This
issue has often surfaced and there has been a push to address this problem [1].
This patch uses file descriptors (fd) from proc/<pid> as stable handles on
struct pid. Even if a pid is recycled the handle will not change. The fd
can be used to send signals to the process it refers to.
Thus, the new syscall pidfd_send_signal() is introduced to solve this
problem. Instead of pids it operates on process fds (pidfd).
/* prototype and argument /*
long pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags);
/* syscall number 424 */
The syscall number was chosen to be 424 to align with Arnd's rework in his
y2038 to minimize merge conflicts (cf. [25]).
In addition to the pidfd and signal argument it takes an additional
siginfo_t and flags argument. If the siginfo_t argument is NULL then
pidfd_send_signal() is equivalent to kill(<positive-pid>, <signal>). If it
is not NULL pidfd_send_signal() is equivalent to rt_sigqueueinfo().
The flags argument is added to allow for future extensions of this syscall.
It currently needs to be passed as 0. Failing to do so will cause EINVAL.
/* pidfd_send_signal() replaces multiple pid-based syscalls */
The pidfd_send_signal() syscall currently takes on the job of
rt_sigqueueinfo(2) and parts of the functionality of kill(2), Namely, when a
positive pid is passed to kill(2). It will however be possible to also
replace tgkill(2) and rt_tgsigqueueinfo(2) if this syscall is extended.
/* sending signals to threads (tid) and process groups (pgid) */
Specifically, the pidfd_send_signal() syscall does currently not operate on
process groups or threads. This is left for future extensions.
In order to extend the syscall to allow sending signal to threads and
process groups appropriately named flags (e.g. PIDFD_TYPE_PGID, and
PIDFD_TYPE_TID) should be added. This implies that the flags argument will
determine what is signaled and not the file descriptor itself. Put in other
words, grouping in this api is a property of the flags argument not a
property of the file descriptor (cf. [13]). Clarification for this has been
requested by Eric (cf. [19]).
When appropriate extensions through the flags argument are added then
pidfd_send_signal() can additionally replace the part of kill(2) which
operates on process groups as well as the tgkill(2) and
rt_tgsigqueueinfo(2) syscalls.
How such an extension could be implemented has been very roughly sketched
in [14], [15], and [16]. However, this should not be taken as a commitment
to a particular implementation. There might be better ways to do it.
Right now this is intentionally left out to keep this patchset as simple as
possible (cf. [4]).
/* naming */
The syscall had various names throughout iterations of this patchset:
- procfd_signal()
- procfd_send_signal()
- taskfd_send_signal()
In the last round of reviews it was pointed out that given that if the
flags argument decides the scope of the signal instead of different types
of fds it might make sense to either settle for "procfd_" or "pidfd_" as
prefix. The community was willing to accept either (cf. [17] and [18]).
Given that one developer expressed strong preference for the "pidfd_"
prefix (cf. [13]) and with other developers less opinionated about the name
we should settle for "pidfd_" to avoid further bikeshedding.
The "_send_signal" suffix was chosen to reflect the fact that the syscall
takes on the job of multiple syscalls. It is therefore intentional that the
name is not reminiscent of neither kill(2) nor rt_sigqueueinfo(2). Not the
fomer because it might imply that pidfd_send_signal() is a replacement for
kill(2), and not the latter because it is a hassle to remember the correct
spelling - especially for non-native speakers - and because it is not
descriptive enough of what the syscall actually does. The name
"pidfd_send_signal" makes it very clear that its job is to send signals.
/* zombies */
Zombies can be signaled just as any other process. No special error will be
reported since a zombie state is an unreliable state (cf. [3]). However,
this can be added as an extension through the @flags argument if the need
ever arises.
/* cross-namespace signals */
The patch currently enforces that the signaler and signalee either are in
the same pid namespace or that the signaler's pid namespace is an ancestor
of the signalee's pid namespace. This is done for the sake of simplicity
and because it is unclear to what values certain members of struct
siginfo_t would need to be set to (cf. [5], [6]).
/* compat syscalls */
It became clear that we would like to avoid adding compat syscalls
(cf. [7]). The compat syscall handling is now done in kernel/signal.c
itself by adding __copy_siginfo_from_user_generic() which lets us avoid
compat syscalls (cf. [8]). It should be noted that the addition of
__copy_siginfo_from_user_any() is caused by a bug in the original
implementation of rt_sigqueueinfo(2) (cf. 12).
With upcoming rework for syscall handling things might improve
significantly (cf. [11]) and __copy_siginfo_from_user_any() will not gain
any additional callers.
/* testing */
This patch was tested on x64 and x86.
/* userspace usage */
An asciinema recording for the basic functionality can be found under [9].
With this patch a process can be killed via:
#define _GNU_SOURCE
#include <errno.h>
#include <fcntl.h>
#include <signal.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/stat.h>
#include <sys/syscall.h>
#include <sys/types.h>
#include <unistd.h>
static inline int do_pidfd_send_signal(int pidfd, int sig, siginfo_t *info,
unsigned int flags)
{
#ifdef __NR_pidfd_send_signal
return syscall(__NR_pidfd_send_signal, pidfd, sig, info, flags);
#else
return -ENOSYS;
#endif
}
int main(int argc, char *argv[])
{
int fd, ret, saved_errno, sig;
if (argc < 3)
exit(EXIT_FAILURE);
fd = open(argv[1], O_DIRECTORY | O_CLOEXEC);
if (fd < 0) {
printf("%s - Failed to open \"%s\"\n", strerror(errno), argv[1]);
exit(EXIT_FAILURE);
}
sig = atoi(argv[2]);
printf("Sending signal %d to process %s\n", sig, argv[1]);
ret = do_pidfd_send_signal(fd, sig, NULL, 0);
saved_errno = errno;
close(fd);
errno = saved_errno;
if (ret < 0) {
printf("%s - Failed to send signal %d to process %s\n",
strerror(errno), sig, argv[1]);
exit(EXIT_FAILURE);
}
exit(EXIT_SUCCESS);
}
/* Q&A
* Given that it seems the same questions get asked again by people who are
* late to the party it makes sense to add a Q&A section to the commit
* message so it's hopefully easier to avoid duplicate threads.
*
* For the sake of progress please consider these arguments settled unless
* there is a new point that desperately needs to be addressed. Please make
* sure to check the links to the threads in this commit message whether
* this has not already been covered.
*/
Q-01: (Florian Weimer [20], Andrew Morton [21])
What happens when the target process has exited?
A-01: Sending the signal will fail with ESRCH (cf. [22]).
Q-02: (Andrew Morton [21])
Is the task_struct pinned by the fd?
A-02: No. A reference to struct pid is kept. struct pid - as far as I
understand - was created exactly for the reason to not require to
pin struct task_struct (cf. [22]).
Q-03: (Andrew Morton [21])
Does the entire procfs directory remain visible? Just one entry
within it?
A-03: The same thing that happens right now when you hold a file descriptor
to /proc/<pid> open (cf. [22]).
Q-04: (Andrew Morton [21])
Does the pid remain reserved?
A-04: No. This patchset guarantees a stable handle not that pids are not
recycled (cf. [22]).
Q-05: (Andrew Morton [21])
Do attempts to signal that fd return errors?
A-05: See {Q,A}-01.
Q-06: (Andrew Morton [22])
Is there a cleaner way of obtaining the fd? Another syscall perhaps.
A-06: Userspace can already trivially retrieve file descriptors from procfs
so this is something that we will need to support anyway. Hence,
there's no immediate need to add another syscalls just to make
pidfd_send_signal() not dependent on the presence of procfs. However,
adding a syscalls to get such file descriptors is planned for a
future patchset (cf. [22]).
Q-07: (Andrew Morton [21] and others)
This fd-for-a-process sounds like a handy thing and people may well
think up other uses for it in the future, probably unrelated to
signals. Are the code and the interface designed to permit such
future applications?
A-07: Yes (cf. [22]).
Q-08: (Andrew Morton [21] and others)
Now I think about it, why a new syscall? This thing is looking
rather like an ioctl?
A-08: This has been extensively discussed. It was agreed that a syscall is
preferred for a variety or reasons. Here are just a few taken from
prior threads. Syscalls are safer than ioctl()s especially when
signaling to fds. Processes are a core kernel concept so a syscall
seems more appropriate. The layout of the syscall with its four
arguments would require the addition of a custom struct for the
ioctl() thereby causing at least the same amount or even more
complexity for userspace than a simple syscall. The new syscall will
replace multiple other pid-based syscalls (see description above).
The file-descriptors-for-processes concept introduced with this
syscall will be extended with other syscalls in the future. See also
[22], [23] and various other threads already linked in here.
Q-09: (Florian Weimer [24])
What happens if you use the new interface with an O_PATH descriptor?
A-09:
pidfds opened as O_PATH fds cannot be used to send signals to a
process (cf. [2]). Signaling processes through pidfds is the
equivalent of writing to a file. Thus, this is not an operation that
operates "purely at the file descriptor level" as required by the
open(2) manpage. See also [4].
/* References */
[1]: https://lore.kernel.org/lkml/20181029221037.87724-1-dancol@google.com/
[2]: https://lore.kernel.org/lkml/874lbtjvtd.fsf@oldenburg2.str.redhat.com/
[3]: https://lore.kernel.org/lkml/20181204132604.aspfupwjgjx6fhva@brauner.io/
[4]: https://lore.kernel.org/lkml/20181203180224.fkvw4kajtbvru2ku@brauner.io/
[5]: https://lore.kernel.org/lkml/20181121213946.GA10795@mail.hallyn.com/
[6]: https://lore.kernel.org/lkml/20181120103111.etlqp7zop34v6nv4@brauner.io/
[7]: https://lore.kernel.org/lkml/36323361-90BD-41AF-AB5B-EE0D7BA02C21@amacapital.net/
[8]: https://lore.kernel.org/lkml/87tvjxp8pc.fsf@xmission.com/
[9]: https://asciinema.org/a/IQjuCHew6bnq1cr78yuMv16cy
[11]: https://lore.kernel.org/lkml/F53D6D38-3521-4C20-9034-5AF447DF62FF@amacapital.net/
[12]: https://lore.kernel.org/lkml/87zhtjn8ck.fsf@xmission.com/
[13]: https://lore.kernel.org/lkml/871s6u9z6u.fsf@xmission.com/
[14]: https://lore.kernel.org/lkml/20181206231742.xxi4ghn24z4h2qki@brauner.io/
[15]: https://lore.kernel.org/lkml/20181207003124.GA11160@mail.hallyn.com/
[16]: https://lore.kernel.org/lkml/20181207015423.4miorx43l3qhppfz@brauner.io/
[17]: https://lore.kernel.org/lkml/CAGXu5jL8PciZAXvOvCeCU3wKUEB_dU-O3q0tDw4uB_ojMvDEew@mail.gmail.com/
[18]: https://lore.kernel.org/lkml/20181206222746.GB9224@mail.hallyn.com/
[19]: https://lore.kernel.org/lkml/20181208054059.19813-1-christian@brauner.io/
[20]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/
[21]: https://lore.kernel.org/lkml/20181228152012.dbf0508c2508138efc5f2bbe@linux-foundation.org/
[22]: https://lore.kernel.org/lkml/20181228233725.722tdfgijxcssg76@brauner.io/
[23]: https://lwn.net/Articles/773459/
[24]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/
[25]: https://lore.kernel.org/lkml/CAK8P3a0ej9NcJM8wXNPbcGUyOUZYX+VLoDFdbenW3s3114oQZw@mail.gmail.com/
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Jann Horn <jannh@google.com>
Cc: Andy Lutomirsky <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Christian Brauner <christian@brauner.io>
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Serge Hallyn <serge@hallyn.com>
Acked-by: Aleksa Sarai <cyphar@cyphar.com>
(cherry picked from commit 3eb39f47934f9d5a3027fe00d906a45fe3a15fad)
Conflicts:
include/linux/proc_fs.h - trivial manual merge
include/uapi/asm-generic/unistd.h - trivial manual merge
kernel/signal.c
(1. manual merges because of 4.19 differences
2. change prepare_kill_siginfo() to use struct siginfo instead of
kernel_siginfo
3. change copy_siginfo_from_user_any() to use struct siginfo instead of
kernel_siginfo
4. change pidfd_send_signal() to use struct siginfo instead of
kernel_siginfo
5. use copy_from_user() instead of copy_siginfo_from_user() in
copy_siginfo_from_user_any())
Bug: 135608568
Test: test program using syscall(__NR_pidfd_send_signal,..) to send SIGKILL
Change-Id: I24e6298ecf036d1822f3fa6c5286984b4e195c16
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Add support for reporting per-uid information through procfs, roughly
following the approach used for per-tid and per-tgid directories in
fs/proc/base.c.
This also entails some new tracking of which uids have been used, to
avoid losing information when the last task with a given uid exits.
Bug: 72339335
Bug: 127641090
Test: ls /proc/uid/; compare with UIDs in /proc/uid_time_in_state
Change-Id: I0908f0c04438b11ceb673d860e58441bf503d478
Signed-off-by: Connor O'Brien <connoro@google.com>
[AmitP: Fix proc_fill_cache() now that upstream commit
0168b9e38c ("procfs: switch instantiate_t to d_splice_alias()"),
switched instantiate() callback to d_splice_alias()]
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
[astrachan: Folded 97b7790f505e ("ANDROID: proc: fix undefined behavior
in proc_uid_base_readdir") into this change]
Signed-off-by: Alistair Strachan <astrachan@google.com>
Provide two extra functions, proc_create_net_data_write() and
proc_create_net_single_write() that act like their non-write versions but
also set a write method in the proc_dir_entry struct.
An internal simple write function is provided that will copy its buffer and
hand it to the pde->write() method if available (or give an error if not).
The buffer may be modified by the write method.
Signed-off-by: David Howells <dhowells@redhat.com>
Variant of proc_create_data that directly take a seq_file show
callback and deals with network namespaces in ->open and ->release.
All callers of proc_create + single_open_net converted over, and
single_{open,release}_net are removed entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Variants of proc_create{,_data} that directly take a struct seq_operations
and deal with network namespaces in ->open and ->release. All callers of
proc_create + seq_open_net converted over, and seq_{open,release}_net are
removed entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Variants of proc_create{,_data} that directly take a seq_file show
callback and drastically reduces the boilerplate code in the callers.
All trivial callers converted over.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Variant of proc_create_data that directly take a struct seq_operations
argument + a private state size and drastically reduces the boilerplate
code in the callers.
All trivial callers converted over.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Variants of proc_create{,_data} that directly take a struct seq_operations
argument and drastically reduces the boilerplate code in the callers.
All trivial callers converted over.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Factor out retrieving the per-sb pid namespaces from the sb private data
into an easier to understand helper.
Suggested-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull xen updates from Juergen Gross:
"Xen features and fixes for 4.10
These are some fixes, a move of some arm related headers to share them
between arm and arm64 and a series introducing a helper to make code
more readable.
The most notable change is David stepping down as maintainer of the
Xen hypervisor interface. This results in me sending you the pull
requests for Xen related code from now on"
* tag 'for-linus-4.10-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (29 commits)
xen/balloon: Only mark a page as managed when it is released
xenbus: fix deadlock on writes to /proc/xen/xenbus
xen/scsifront: don't request a slot on the ring until request is ready
xen/x86: Increase xen_e820_map to E820_X_MAX possible entries
x86: Make E820_X_MAX unconditionally larger than E820MAX
xen/pci: Bubble up error and fix description.
xen: xenbus: set error code on failure
xen: set error code on failures
arm/xen: Use alloc_percpu rather than __alloc_percpu
arm/arm64: xen: Move shared architecture headers to include/xen/arm
xen/events: use xen_vcpu_id mapping for EVTCHNOP_status
xen/gntdev: Use VM_MIXEDMAP instead of VM_IO to avoid NUMA balancing
xen-scsifront: Add a missing call to kfree
MAINTAINERS: update XEN HYPERVISOR INTERFACE
xenfs: Use proc_create_mount_point() to create /proc/xen
xen-platform: use builtin_pci_driver
xen-netback: fix error handling output
xen: make use of xenbus_read_unsigned() in xenbus
xen: make use of xenbus_read_unsigned() in xen-pciback
xen: make use of xenbus_read_unsigned() in xen-fbfront
...
Mounting proc in user namespace containers fails if the xenbus
filesystem is mounted on /proc/xen because this directory fails
the "permanently empty" test. proc_create_mount_point() exists
specifically to create such mountpoints in proc but is currently
proc-internal. Export this interface to modules, then use it in
xenbus when creating /proc/xen.
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Each socket operates in a network namespace where it has been created,
so if we want to dump and restore a socket, we have to know its network
namespace.
We have a socket_diag to get information about sockets, it doesn't
report sockets which are not bound or connected.
This patch introduces a new socket ioctl, which is called SIOCGSKNS
and used to get a file descriptor for a socket network namespace.
A task must have CAP_NET_ADMIN in a target network namespace to
use this ioctl.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, all of the grace period handling is part of lockd. Eventually
though we'd like to be able to build v4-only servers, at which point
we'll need to put all of this elsewhere.
Move the code itself into fs/nfs_common and have it build a grace.ko
module. Then, rejigger the Kconfig options so that both nfsd and lockd
enable it automatically.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Move non-public declarations and definitions from linux/proc_fs.h to
fs/proc/internal.h.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Make the PROC_I() and PDE() macros internal to procfs. This means making
PDE_DATA() out of line. This could be made more optimal by storing
PDE()->data into inode->i_private.
Also provide a __PDE_DATA() that is inline and internal to procfs.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Supply an accessor function for getting the private data from the parent
proc_dir_entry struct of the proc_dir_entry struct associated with an inode.
ReiserFS, for instance, stores the super_block pointer in the proc directory
it makes for that super_block, and a pointer to the respective seq_file show
function in each of the proc files in that directory.
This allows a reduction in the number of file_operations structs, open
functions and seq_operations structs required. The problem otherwise is that
each show function requires two pieces of data but only has storage for one
per PDE (and this has no release function).
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cc: Jerry Chuang <jerry-chuang@realtek.com>
cc: Maxim Mikityanskiy <maxtram95@gmail.com>
cc: YAMANE Toshiaki <yamanetoshi@gmail.com>
cc: linux-wireless@vger.kernel.org
cc: linux-scsi@vger.kernel.org
cc: devel@driverdev.osuosl.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Move PDE_NET() to fs/proc/proc_net.c as that's where the only user is.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Delete create_proc_read_entry() as it no longer has any users.
Also delete read_proc_t, write_proc_t, the read_proc member of the
proc_dir_entry struct and the support functions that use them. This saves a
pointer for every PDE allocated.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Mark create_proc_read_entry deprecated. proc_create[_data]() should be used
instead.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Kill create_proc_entry() in favour of create_proc_read_entry(), proc_create()
and proc_create_data().
Signed-off-by: David Howells <dhowells@redhat.com>
The only part of proc_dir_entry the code outside of fs/proc
really cares about is PDE(inode)->data. Provide a helper
for that; static inline for now, eventually will be moved
to fs/proc, along with the knowledge of struct proc_dir_entry
layout.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
just what it sounds like; do that only to procfs subtrees you've
created - doing that to something shared with another driver is
not only antisocial, but might cause interesting races with
proc_create() and its ilk.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull tty/serial patches from Greg Kroah-Hartman:
"Here's the big tty/serial driver patches for 3.9-rc1.
More tty port rework and fixes from Jiri here, as well as lots of
individual serial driver updates and fixes.
All of these have been in the linux-next tree for a while."
* tag 'tty-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits)
tty: mxser: improve error handling in mxser_probe() and mxser_module_init()
serial: imx: fix uninitialized variable warning
serial: tegra: assume CONFIG_OF
TTY: do not update atime/mtime on read/write
lguest: select CONFIG_TTY to build properly.
ARM defconfigs: add missing inclusions of linux/platform_device.h
fb/exynos: include platform_device.h
ARM: sa1100/assabet: include platform_device.h directly
serial: imx: Fix recursive locking bug
pps: Fix build breakage from decoupling pps from tty
tty: Remove ancient hardpps()
pps: Additional cleanups in uart_handle_dcd_change
pps: Move timestamp read into PPS code proper
pps: Don't crash the machine when exiting will do
pps: Fix a use-after free bug when unregistering a source.
pps: Use pps_lookup_dev to reduce ldisc coupling
pps: Add pps_lookup_dev() function
tty: serial: uartlite: Support uartlite on big and little endian systems
tty: serial: uartlite: Fix sparse and checkpatch warnings
serial/arc-uart: Miscll DT related updates (Grant's review comments)
...
Fix up trivial conflicts, mostly just due to the TTY config option
clashing with the EXPERIMENTAL removal.
commit d4beaa66ad
"net: proc: change proc_net_fops_create to proc_create"
uses proc_create to replace proc_net_fops_create, when
CONFIG_PROC isn't configured, some build error will
occurs.
net/packet/af_packet.c: In function 'packet_net_init':
net/packet/af_packet.c:3831:48: error: 'packet_seq_fops' undeclared (first use in this function)
net/packet/af_packet.c:3831:48: note: each undeclared identifier is reported only once for each function it appears in
There may be other build fails like above,this patch
change proc_create from function to macros when CONFIG_PROC
is not configured,just like what proc_net_fops_create did
before this commit.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
proc_net_remove has been replaced by remove_proc_entry.
we can remove it now.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
proc_net_fops_create has been replaced by proc_create,
we can remove it now.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The option allows you to remove TTY and compile without errors. This
saves space on systems that won't support TTY interfaces anyway.
bloat-o-meter output is below.
The bulk of this patch consists of Kconfig changes adding "depends on
TTY" to various serial devices and similar drivers that require the TTY
layer. Ideally, these dependencies would occur on a common intermediate
symbol such as SERIO, but most drivers "select SERIO" rather than
"depends on SERIO", and "select" does not respect dependencies.
bloat-o-meter output comparing our previous minimal to new minimal by
removing TTY. The list is filtered to not show removed entries with awk
'$3 != "-"' as the list was very long.
add/remove: 0/226 grow/shrink: 2/14 up/down: 6/-35356 (-35350)
function old new delta
chr_dev_init 166 170 +4
allow_signal 80 82 +2
static.__warned 143 142 -1
disallow_signal 63 62 -1
__set_special_pids 95 94 -1
unregister_console 126 121 -5
start_kernel 546 541 -5
register_console 593 588 -5
copy_from_user 45 40 -5
sys_setsid 128 120 -8
sys_vhangup 32 19 -13
do_exit 1543 1526 -17
bitmap_zero 60 40 -20
arch_local_irq_save 137 117 -20
release_task 674 652 -22
static.spin_unlock_irqrestore 308 260 -48
Signed-off-by: Joe Millenbach <jmillenbach@gmail.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge misc patches from Andrew Morton:
"Incoming:
- lots of misc stuff
- backlight tree updates
- lib/ updates
- Oleg's percpu-rwsem changes
- checkpatch
- rtc
- aoe
- more checkpoint/restart support
I still have a pile of MM stuff pending - Pekka should be merging
later today after which that is good to go. A number of other things
are twiddling thumbs awaiting maintainer merges."
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (180 commits)
scatterlist: don't BUG when we can trivially return a proper error.
docs: update documentation about /proc/<pid>/fdinfo/<fd> fanotify output
fs, fanotify: add @mflags field to fanotify output
docs: add documentation about /proc/<pid>/fdinfo/<fd> output
fs, notify: add procfs fdinfo helper
fs, exportfs: add exportfs_encode_inode_fh() helper
fs, exportfs: escape nil dereference if no s_export_op present
fs, epoll: add procfs fdinfo helper
fs, eventfd: add procfs fdinfo helper
procfs: add ability to plug in auxiliary fdinfo providers
tools/testing/selftests/kcmp/kcmp_test.c: print reason for failure in kcmp_test
breakpoint selftests: print failure status instead of cause make error
kcmp selftests: print fail status instead of cause make error
kcmp selftests: make run_tests fix
mem-hotplug selftests: print failure status instead of cause make error
cpu-hotplug selftests: print failure status instead of cause make error
mqueue selftests: print failure status instead of cause make error
vm selftests: print failure status instead of cause make error
ubifs: use prandom_bytes
mtd: nandsim: use prandom_bytes
...
Assign a unique proc inode to each namespace, and use that
inode number to ensure we only allocate at most one proc
inode for every namespace in proc.
A single proc inode per namespace allows userspace to test
to see if two processes are in the same namespace.
This has been a long requested feature and only blocked because
a naive implementation would put the id in a global space and
would ultimately require having a namespace for the names of
namespaces, making migration and certain virtualization tricks
impossible.
We still don't have per superblock inode numbers for proc, which
appears necessary for application unaware checkpoint/restart and
migrations (if the application is using namespace file descriptors)
but that is now allowd by the design if it becomes important.
I have preallocated the ipc and uts initial proc inode numbers so
their structures can be statically initialized.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Generalize the proc inode allocation so that it can be
used without having to having to create a proc_dir_entry.
This will allow namespace file descriptors to remain light
weight entitities but still have the same inode number
when the backing namespace is the same.
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
