Changes in 4.19.325
netlink: terminate outstanding dump on socket close
ocfs2: uncache inode which has failed entering the group
nilfs2: fix null-ptr-deref in block_touch_buffer tracepoint
ocfs2: fix UBSAN warning in ocfs2_verify_volume()
nilfs2: fix null-ptr-deref in block_dirty_buffer tracepoint
Revert "mmc: dw_mmc: Fix IDMAC operation with pages bigger than 4K"
media: dvbdev: fix the logic when DVB_DYNAMIC_MINORS is not set
kbuild: Use uname for LINUX_COMPILE_HOST detection
mm: revert "mm: shmem: fix data-race in shmem_getattr()"
ASoC: Intel: bytcr_rt5640: Add DMI quirk for Vexia Edu Atla 10 tablet
mac80211: fix user-power when emulating chanctx
selftests/watchdog-test: Fix system accidentally reset after watchdog-test
x86/amd_nb: Fix compile-testing without CONFIG_AMD_NB
net: usb: qmi_wwan: add Quectel RG650V
proc/softirqs: replace seq_printf with seq_put_decimal_ull_width
nvme: fix metadata handling in nvme-passthrough
initramfs: avoid filename buffer overrun
m68k: mvme147: Fix SCSI controller IRQ numbers
m68k: mvme16x: Add and use "mvme16x.h"
m68k: mvme147: Reinstate early console
acpi/arm64: Adjust error handling procedure in gtdt_parse_timer_block()
s390/syscalls: Avoid creation of arch/arch/ directory
hfsplus: don't query the device logical block size multiple times
EDAC/fsl_ddr: Fix bad bit shift operations
crypto: pcrypt - Call crypto layer directly when padata_do_parallel() return -EBUSY
crypto: cavium - Fix the if condition to exit loop after timeout
crypto: bcm - add error check in the ahash_hmac_init function
crypto: cavium - Fix an error handling path in cpt_ucode_load_fw()
time: Fix references to _msecs_to_jiffies() handling of values
soc: qcom: geni-se: fix array underflow in geni_se_clk_tbl_get()
mmc: mmc_spi: drop buggy snprintf()
ARM: dts: cubieboard4: Fix DCDC5 regulator constraints
regmap: irq: Set lockdep class for hierarchical IRQ domains
firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
drm/mm: Mark drm_mm_interval_tree*() functions with __maybe_unused
wifi: ath9k: add range check for conn_rsp_epid in htc_connect_service()
drm/omap: Fix locking in omap_gem_new_dmabuf()
bpf: Fix the xdp_adjust_tail sample prog issue
wifi: mwifiex: Fix memcpy() field-spanning write warning in mwifiex_config_scan()
drm/etnaviv: consolidate hardware fence handling in etnaviv_gpu
drm/etnaviv: dump: fix sparse warnings
drm/etnaviv: fix power register offset on GC300
drm/etnaviv: hold GPU lock across perfmon sampling
net: rfkill: gpio: Add check for clk_enable()
ALSA: us122l: Use snd_card_free_when_closed() at disconnection
ALSA: caiaq: Use snd_card_free_when_closed() at disconnection
ALSA: 6fire: Release resources at card release
netpoll: Use rcu_access_pointer() in netpoll_poll_lock
trace/trace_event_perf: remove duplicate samples on the first tracepoint event
powerpc/vdso: Flag VDSO64 entry points as functions
mfd: da9052-spi: Change read-mask to write-mask
cpufreq: loongson2: Unregister platform_driver on failure
mtd: rawnand: atmel: Fix possible memory leak
RDMA/bnxt_re: Check cqe flags to know imm_data vs inv_irkey
mfd: rt5033: Fix missing regmap_del_irq_chip()
scsi: bfa: Fix use-after-free in bfad_im_module_exit()
scsi: fusion: Remove unused variable 'rc'
scsi: qedi: Fix a possible memory leak in qedi_alloc_and_init_sb()
ocfs2: fix uninitialized value in ocfs2_file_read_iter()
powerpc/sstep: make emulate_vsx_load and emulate_vsx_store static
fbdev/sh7760fb: Alloc DMA memory from hardware device
fbdev: sh7760fb: Fix a possible memory leak in sh7760fb_alloc_mem()
dt-bindings: clock: adi,axi-clkgen: convert old binding to yaml format
dt-bindings: clock: axi-clkgen: include AXI clk
clk: axi-clkgen: use devm_platform_ioremap_resource() short-hand
clk: clk-axi-clkgen: make sure to enable the AXI bus clock
perf probe: Correct demangled symbols in C++ program
PCI: cpqphp: Use PCI_POSSIBLE_ERROR() to check config reads
PCI: cpqphp: Fix PCIBIOS_* return value confusion
m68k: mcfgpio: Fix incorrect register offset for CONFIG_M5441x
m68k: coldfire/device.c: only build FEC when HW macros are defined
rpmsg: glink: Add TX_DATA_CONT command while sending
rpmsg: glink: Send READ_NOTIFY command in FIFO full case
rpmsg: glink: Fix GLINK command prefix
rpmsg: glink: use only lower 16-bits of param2 for CMD_OPEN name length
NFSD: Prevent NULL dereference in nfsd4_process_cb_update()
NFSD: Cap the number of bytes copied by nfs4_reset_recoverydir()
vfio/pci: Properly hide first-in-list PCIe extended capability
power: supply: core: Remove might_sleep() from power_supply_put()
net: usb: lan78xx: Fix memory leak on device unplug by freeing PHY device
tg3: Set coherent DMA mask bits to 31 for BCM57766 chipsets
net: usb: lan78xx: Fix refcounting and autosuspend on invalid WoL configuration
marvell: pxa168_eth: fix call balance of pep->clk handling routines
net: stmmac: dwmac-socfpga: Set RX watchdog interrupt as broken
usb: using mutex lock and supporting O_NONBLOCK flag in iowarrior_read()
USB: chaoskey: fail open after removal
USB: chaoskey: Fix possible deadlock chaoskey_list_lock
misc: apds990x: Fix missing pm_runtime_disable()
apparmor: fix 'Do simple duplicate message elimination'
usb: ehci-spear: fix call balance of sehci clk handling routines
ext4: supress data-race warnings in ext4_free_inodes_{count,set}()
ext4: fix FS_IOC_GETFSMAP handling
jfs: xattr: check invalid xattr size more strictly
ASoC: codecs: Fix atomicity violation in snd_soc_component_get_drvdata()
PCI: Fix use-after-free of slot->bus on hot remove
tty: ldsic: fix tty_ldisc_autoload sysctl's proc_handler
Bluetooth: Fix type of len in rfcomm_sock_getsockopt{,_old}()
ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices
Revert "usb: gadget: composite: fix OS descriptors w_value logic"
serial: sh-sci: Clean sci_ports[0] after at earlycon exit
Revert "serial: sh-sci: Clean sci_ports[0] after at earlycon exit"
netfilter: ipset: add missing range check in bitmap_ip_uadt
spi: Fix acpi deferred irq probe
ubi: wl: Put source PEB into correct list if trying locking LEB failed
um: ubd: Do not use drvdata in release
um: net: Do not use drvdata in release
serial: 8250: omap: Move pm_runtime_get_sync
um: vector: Do not use drvdata in release
sh: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled
block: fix ordering between checking BLK_MQ_S_STOPPED request adding
HID: wacom: Interpret tilt data from Intuos Pro BT as signed values
media: wl128x: Fix atomicity violation in fmc_send_cmd()
usb: dwc3: gadget: Fix checking for number of TRBs left
lib: string_helpers: silence snprintf() output truncation warning
NFSD: Prevent a potential integer overflow
rpmsg: glink: Propagate TX failures in intentless mode as well
um: Fix the return value of elf_core_copy_task_fpregs
NFSv4.0: Fix a use-after-free problem in the asynchronous open()
rtc: check if __rtc_read_time was successful in rtc_timer_do_work()
ubifs: Correct the total block count by deducting journal reservation
ubi: fastmap: Fix duplicate slab cache names while attaching
jffs2: fix use of uninitialized variable
block: return unsigned int from bdev_io_min
9p/xen: fix init sequence
9p/xen: fix release of IRQ
modpost: remove incorrect code in do_eisa_entry()
sh: intc: Fix use-after-free bug in register_intc_controller()
Linux 4.19.325
Change-Id: I50250c8bd11f9ff4b40da75225c1cfb060e0c258
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 1e66d50ad3a1dbf0169b14d502be59a4b1213149 upstream.
`hostname` may not be present on some systems as it's not mandated by
POSIX/SUSv4. This isn't just a theoretical problem: on Arch Linux,
`hostname` is provided by `inetutils`, which isn't part of the base
distribution.
./scripts/mkcompile_h: line 38: hostname: command not found
Use `uname -n` instead, which is more likely to be available (and
mandated by standards).
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes in 4.19.199
ARM: dts: gemini: rename mdio to the right name
ARM: dts: gemini: add device_type on pci
ARM: dts: rockchip: fix pinctrl sleep nodename for rk3036-kylin and rk3288
arm64: dts: rockchip: fix pinctrl sleep nodename for rk3399.dtsi
ARM: dts: rockchip: Fix the timer clocks order
ARM: dts: rockchip: Fix IOMMU nodes properties on rk322x
ARM: dts: rockchip: Fix power-controller node names for rk3288
arm64: dts: rockchip: Fix power-controller node names for rk3328
reset: ti-syscon: fix to_ti_syscon_reset_data macro
ARM: brcmstb: dts: fix NAND nodes names
ARM: Cygnus: dts: fix NAND nodes names
ARM: NSP: dts: fix NAND nodes names
ARM: dts: BCM63xx: Fix NAND nodes names
ARM: dts: Hurricane 2: Fix NAND nodes names
ARM: dts: imx6: phyFLEX: Fix UART hardware flow control
ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info
rtc: mxc_v2: add missing MODULE_DEVICE_TABLE
ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards
ARM: dts: stm32: fix RCC node name on stm32f429 MCU
ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings
arm64: dts: juno: Update SCPI nodes as per the YAML schema
ARM: dts: rockchip: fix supply properties in io-domains nodes
ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings
ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15
soc/tegra: fuse: Fix Tegra234-only builds
arm64: dts: ls208xa: remove bus-num from dspi node
thermal/core: Correct function name thermal_zone_device_unregister()
kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set
rtc: max77686: Do not enforce (incorrect) interrupt trigger type
scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8
scsi: libsas: Add LUN number check in .slave_alloc callback
scsi: libfc: Fix array index out of bound exception
sched/fair: Fix CFS bandwidth hrtimer expiry type
mm: slab: fix kmem_cache_create failed when sysfs node not destroyed
dm writecache: return the exact table values that were set
dm writecache: fix writing beyond end of underlying device when shrinking
net: dsa: mv88e6xxx: enable .rmu_disable() on Topaz
net: ipv6: fix return value of ip6_skb_dst_mtu
netfilter: ctnetlink: suspicious RCU usage in ctnetlink_dump_helpinfo
net: bridge: sync fdb to new unicast-filtering ports
net: bcmgenet: Ensure all TX/RX queues DMAs are disabled
net: moxa: fix UAF in moxart_mac_probe
net: qcom/emac: fix UAF in emac_remove
net: ti: fix UAF in tlan_remove_one
net: send SYNACK packet with accepted fwmark
net: validate lwtstate->data before returning from skb_tunnel_info()
dma-buf/sync_file: Don't leak fences on merge failure
tcp: annotate data races around tp->mtu_info
ipv6: tcp: drop silly ICMPv6 packet too big messages
bpftool: Properly close va_list 'ap' by va_end() on error
udp: annotate data races around unix_sk(sk)->gso_size
net: ip_tunnel: fix mtu calculation for ETHER tunnel devices
igb: Fix use-after-free error during reset
ixgbe: Fix an error handling path in 'ixgbe_probe()'
igb: Fix an error handling path in 'igb_probe()'
fm10k: Fix an error handling path in 'fm10k_probe()'
e1000e: Fix an error handling path in 'e1000_probe()'
iavf: Fix an error handling path in 'iavf_probe()'
igb: Check if num of q_vectors is smaller than max before array access
igb: Fix position of assignment to *ring
ipv6: fix 'disable_policy' for fwd packets
nvme-pci: do not call nvme_dev_remove_admin from nvme_remove
perf map: Fix dso->nsinfo refcounting
perf probe: Fix dso->nsinfo refcounting
perf dso: Fix memory leak in dso__new_map()
perf lzma: Close lzma stream on exit
perf test bpf: Free obj_buf
perf probe-file: Delete namelist in del_events() on the error path
spi: mediatek: fix fifo rx mode
liquidio: Fix unintentional sign extension issue on left shift of u16
s390/bpf: Perform r1 range checking before accessing jit->seen_reg[r1]
bpftool: Check malloc return value in mount_bpffs_for_pin
net: fix uninit-value in caif_seqpkt_sendmsg
net: decnet: Fix sleeping inside in af_decnet
KVM: PPC: Fix kvm_arch_vcpu_ioctl vcpu_load leak
netrom: Decrease sock refcount when sock timers expire
scsi: iscsi: Fix iface sysfs attr detection
scsi: target: Fix protect handling in WRITE SAME(32)
spi: cadence: Correct initialisation of runtime PM again
net/tcp_fastopen: fix data races around tfo_active_disable_stamp
net/sched: act_skbmod: Skip non-Ethernet packets
nvme-pci: don't WARN_ON in nvme_reset_work if ctrl.state is not RESETTING
Revert "USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem"
sctp: update active_key for asoc when old key is being replaced
net: sched: cls_api: Fix the the wrong parameter
drm/panel: raspberrypi-touchscreen: Prevent double-free
proc: Avoid mixing integer types in mem_rw()
Revert "MIPS: add PMD table accounting into MIPS'pmd_alloc_one"
s390/ftrace: fix ftrace_update_ftrace_func implementation
ALSA: usb-audio: Add registration quirk for JBL Quantum headsets
ALSA: sb: Fix potential ABBA deadlock in CSP driver
xhci: Fix lost USB 2 remote wake
KVM: PPC: Book3S: Fix H_RTAS rets buffer overflow
usb: hub: Disable USB 3 device initiated lpm if exit latency is too high
usb: hub: Fix link power management max exit latency (MEL) calculations
USB: usb-storage: Add LaCie Rugged USB3-FW to IGNORE_UAS
usb: max-3421: Prevent corruption of freed memory
usb: renesas_usbhs: Fix superfluous irqs happen after usb_pkt_pop()
USB: serial: option: add support for u-blox LARA-R6 family
USB: serial: cp210x: fix comments for GE CS1000
USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick
usb: dwc2: gadget: Fix sending zero length packet in DDMA mode.
tracing: Fix bug in rb_per_cpu_empty() that might cause deadloop.
media: ngene: Fix out-of-bounds bug in ngene_command_config_free_buf()
ixgbe: Fix packet corruption due to missing DMA sync
selftest: use mmap instead of posix_memalign to allocate memory
nds32: fix up stack guard gap
drm: Return -ENOTTY for non-drm ioctls
KVM: do not assume PTE is writable after follow_pfn
KVM: do not allow mapping valid but non-reference-counted pages
KVM: Use kvm_pfn_t for local PFN variable in hva_to_pfn_remapped()
net: dsa: mv88e6xxx: use correct .stats_set_histogram() on Topaz
net: bcmgenet: ensure EXT_ENERGY_DET_MASK is clear
iio: accel: bma180: Use explicit member assignment
iio: accel: bma180: Fix BMA25x bandwidth register values
btrfs: compression: don't try to compress if we don't have enough pages
PCI: Mark AMD Navi14 GPU ATS as broken
spi: spi-fsl-dspi: Fix a resource leak in an error handling path
xhci: add xhci_get_virt_ep() helper
Linux 4.19.199
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I64b971750ef2532ef201367d980a3519b8c8a591
[ Upstream commit a979522a1a88556e42a22ce61bccc58e304cb361 ]
To avoid unnecessary recompilations, mkcompile_h does not regenerate
compile.h if just the timestamp changed.
Though, if KBUILD_BUILD_TIMESTAMP is set, an explicit timestamp for the
build was requested, in which case we should not ignore it.
If a user follows the documentation for reproducible builds [1] and
defines KBUILD_BUILD_TIMESTAMP as the git commit timestamp, a clean
build will have the correct timestamp. A subsequent cherry-pick (or
amend) changes the commit timestamp and if an incremental build is done
with a different KBUILD_BUILD_TIMESTAMP now, that new value is not taken
into consideration. But it should for reproducibility.
Hence, whenever KBUILD_BUILD_TIMESTAMP is explicitly set, do not ignore
UTS_VERSION when making a decision about whether the regenerated version
of compile.h should be moved into place.
[1] https://www.kernel.org/doc/html/latest/kbuild/reproducible-builds.html
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
When doing Clang builds of the kernel, it is possible to link with
either ld.bfd (binutils) or ld.lld (LLVM), but it is not possible to
discover this from a running kernel. Add the "$LD -v" output to
/proc/version.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Bug: 153484457
(cherry picked from commit 6f04f056df3c
https://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild.git
for-next)
[nd: commit 4b950bb9ac0c ("Kbuild: Handle PREEMPT_RT for version string and magic")
missing in 4.19, first landed in 5.4-rc1.
commit b79c6aa6a1f1 ("kbuild: remove unnecessary in-subshell execution")
missing in 4.19, first landed in 5.1-rc1.
]
Change-Id: Ifa5a98fe159392862e8d07a733c0f141fa9c7715
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Pull Kbuild updates from Masahiro Yamada:
"One of the most remarkable improvements in this cycle is, Kbuild is
now able to cache the result of shell commands. Some variables are
expensive to compute, for example, $(call cc-option,...) invokes the
compiler. It is not efficient to redo this computation every time,
even when we are not actually building anything. Kbuild creates a
hidden file ".cache.mk" that contains invoked shell commands and their
results. The speed-up should be noticeable.
Summary:
- Fix arch build issues (hexagon, sh)
- Clean up various Makefiles and scripts
- Fix wrong usage of {CFLAGS,LDFLAGS}_MODULE in arch Makefiles
- Cache variables that are expensive to compute
- Improve cc-ldopton and ld-option for Clang
- Optimize output directory creation"
* tag 'kbuild-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
kbuild: move coccicheck help from scripts/Makefile.help to top Makefile
sh: decompressor: add shipped files to .gitignore
frv: .gitignore: ignore vmlinux.lds
selinux: remove unnecessary assignment to subdir-
kbuild: specify FORCE in Makefile.headersinst as .PHONY target
kbuild: remove redundant mkdir from ./Kbuild
kbuild: optimize object directory creation for incremental build
kbuild: create object directories simpler and faster
kbuild: filter-out PHONY targets from "targets"
kbuild: remove redundant $(wildcard ...) for cmd_files calculation
kbuild: create directory for make cache only when necessary
sh: select KBUILD_DEFCONFIG depending on ARCH
kbuild: fix linker feature test macros when cross compiling with Clang
kbuild: shrink .cache.mk when it exceeds 1000 lines
kbuild: do not call cc-option before KBUILD_CFLAGS initialization
kbuild: Cache a few more calls to the compiler
kbuild: Add a cache for generated variables
kbuild: add forward declaration of default target to Makefile.asm-generic
kbuild: remove KBUILD_SUBDIR_ASFLAGS and KBUILD_SUBDIR_CCFLAGS
hexagon/kbuild: replace CFLAGS_MODULE with KBUILD_CFLAGS_MODULE
...
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This script does not need to create .version; it will be created by
scripts/link-vmlinux.sh later. Clean-up the code slightly.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Improves the output of "cat /proc/version" by getting rid of the
trailing space at the end of the compiler version when the kernel
is compiled using GCC.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When building the LINUX_COMPILER definition, instead of merely taking the last
line from "$(CC) -v", grep for ' version ' in the output. This supports both
gcc and clang.
Signed-off-by: Jan-Simon Möller <dl9pf@gmx.de>
Signed-off-by: Behan Webster <behanw@converseincode.com>
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
Cc: PaX Team <pageexec@freemail.hu>
When using a domain login, `whoami` returns the login in
user\domain format. This leads to either warnings on unrecognised
escape sequences or escaped characters being generated for the user.
This patch ensures that any backslash is escaped to a double-backslash
to make sure the name is preserved correctly. This patch does not
enforce escaping on the KBUILD_BUILD_USER variable, as this is something
the user has control of and can escape if required.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski.000@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Make it possible to override the user@host string displayed during boot
and in /proc/version by the environment variables KBUILD_BUILD_USER and
KBUILD_BUILD_HOST. Several distributions patch scripts/mkcompile_h to
achieve this, so let's provide an official way. Also, document the
KBUILD_BUILD_TIMESTAMP variable while at it.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Don't test for /bin/{dnsdomainname,domainname}, simply try to execute
the command and check if it returned something.
Reported-by: Glenn Sommer <glemsom@gmail.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Tested-by: Glenn Sommer <glemsom@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The mkcompile_h script does `echo` regardless of silent mode the make is
running at, so have it respect $quiet from kbuild and only echo when not in
silent mode.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Introduce KBUILD_BUILD_VERSION to make it
possible to override kernel build version
during build time.
Introduce KBUILD_BUILD_TIMESTAMP to make it
possible to override kernel build timestamp
during build time.
But variables are useful mainly by distros
that want to pass info from an SCM when
building the kernel. Timestamp could be last
checkin date for a file etc.
The idea came from Olaf Hering <olaf@aepfle.de>
Cc: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Fix a minor bug in mkcompile_h. As one can see, the current locale is used
while getting the version of gcc. This produces problems when a locale
other than C or en_US is used. As an example, my /proc/version contains
Turkish characters in iso-8859-9 encoding.
This patch fixes this issue by making sure that the C locale is used to get
gcc's version.
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
From: Matt Mackall <mpm@selenic.com>
Add PREEMPT to UTS_VERSION where enabled as is done for SMP to make
preempt kernels easily identifiable.
Added SMP PREEMPT as comment in compile.h to force it to be
updated when they change (sam).
Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
