Similarly to 5a52ae4e32a6 ("bpf: Allow to retrieve cgroup v1 classid
from v2 hooks"), add a helper to retrieve cgroup v1 classid solely
based on the skb->sk, so it can be used as key as part of BPF map
lookups out of tc from host ns, in particular given the skb->sk is
retained these days when crossing net ns thanks to 9c4c325252
("skbuff: preserve sock reference when scrubbing the skb."). This
is similar to bpf_skb_cgroup_id() which implements the same for v2.
Kubernetes ecosystem is still operating on v1 however, hence net_cls
needs to be used there until this can be dropped in with the v2
helper of bpf_skb_cgroup_id().
Change-Id: Iafb100978944174dd962d8409f229dfd0fd3780e
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/ed633cf27a1c620e901c5aa99ebdefb028dce600.1601477936.git.daniel@iogearbox.net
This enables support for attaching freplace programs to multiple attach
points. It does this by amending the UAPI for bpf_link_Create with a target
btf ID that can be used to supply the new attachment point along with the
target program fd. The target must be compatible with the target that was
supplied at program load time.
The implementation reuses the checks that were factored out of
check_attach_btf_id() to ensure compatibility between the BTF types of the
old and new attachment. If these match, a new bpf_tracing_link will be
created for the new attach target, allowing multiple attachments to
co-exist simultaneously.
The code could theoretically support multiple-attach of other types of
tracing programs as well, but since I don't have a use case for any of
those, there is no API support for doing so.
Change-Id: Ifeca634ba0c7ae9b1c5bc3c11a9d2b83fb0b5d23
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/160138355169.48470.17165680973640685368.stgit@toke.dk
A helper is added to allow seq file writing of kernel data
structures using vmlinux BTF. Its signature is
long bpf_seq_printf_btf(struct seq_file *m, struct btf_ptr *ptr,
u32 btf_ptr_size, u64 flags);
Flags and struct btf_ptr definitions/use are identical to the
bpf_snprintf_btf helper, and the helper returns 0 on success
or a negative error value.
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Change-Id: Ief0f9b8b9d9ed5f725159d71d1f3eb26f28c27c1
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/1601292670-1616-8-git-send-email-alan.maguire@oracle.com
A helper is added to support tracing kernel type information in BPF
using the BPF Type Format (BTF). Its signature is
long bpf_snprintf_btf(char *str, u32 str_size, struct btf_ptr *ptr,
u32 btf_ptr_size, u64 flags);
struct btf_ptr * specifies
- a pointer to the data to be traced
- the BTF id of the type of data pointed to
- a flags field is provided for future use; these flags
are not to be confused with the BTF_F_* flags
below that control how the btf_ptr is displayed; the
flags member of the struct btf_ptr may be used to
disambiguate types in kernel versus module BTF, etc;
the main distinction is the flags relate to the type
and information needed in identifying it; not how it
is displayed.
For example a BPF program with a struct sk_buff *skb
could do the following:
static struct btf_ptr b = { };
b.ptr = skb;
b.type_id = __builtin_btf_type_id(struct sk_buff, 1);
bpf_snprintf_btf(str, sizeof(str), &b, sizeof(b), 0, 0);
Default output looks like this:
(struct sk_buff){
.transport_header = (__u16)65535,
.mac_header = (__u16)65535,
.end = (sk_buff_data_t)192,
.head = (unsigned char *)0x000000007524fd8b,
.data = (unsigned char *)0x000000007524fd8b,
.truesize = (unsigned int)768,
.users = (refcount_t){
.refs = (atomic_t){
.counter = (int)1,
},
},
}
Flags modifying display are as follows:
- BTF_F_COMPACT: no formatting around type information
- BTF_F_NONAME: no struct/union member names/types
- BTF_F_PTR_RAW: show raw (unobfuscated) pointer values;
equivalent to %px.
- BTF_F_ZERO: show zero-valued struct/union members;
they are not displayed by default
Change-Id: I77f2c2a0d41aee2f4f10e3288a36de475fd2cb46
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/1601292670-1616-4-git-send-email-alan.maguire@oracle.com
Add .test_run for raw_tracepoint. Also, introduce a new feature that runs
the target program on a specific CPU. This is achieved by a new flag in
bpf_attr.test, BPF_F_TEST_RUN_ON_CPU. When this flag is set, the program
is triggered on cpu with id bpf_attr.test.cpu. This feature is needed for
BPF programs that handle perf_event and other percpu resources, as the
program can access these resource locally.
Change-Id: Id8f992caff30d7b65df8195f8934bcb2d8b658cb
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200925205432.1777-2-songliubraving@fb.com
This patch changes the bpf_sk_assign() to take
ARG_PTR_TO_BTF_ID_SOCK_COMMON such that they will work with the pointer
returned by the bpf_skc_to_*() helpers also.
The bpf_sk_lookup_assign() is taking ARG_PTR_TO_SOCKET_"OR_NULL". Meaning
it specifically takes a literal NULL. ARG_PTR_TO_BTF_ID_SOCK_COMMON
does not allow a literal NULL, so another ARG type is required
for this purpose and another follow-up patch can be used if
there is such need.
Change-Id: Ia2747b017398c8dcc4454118dba03e71bdeba1dc
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200925000415.3857374-1-kafai@fb.com
This patch changes the bpf_tcp_*_syncookie() to take
ARG_PTR_TO_BTF_ID_SOCK_COMMON such that they will work with the pointer
returned by the bpf_skc_to_*() helpers also.
Change-Id: I4f7712acada428dab29b94f0cb9bbbb19d9eaea2
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/20200925000409.3856725-1-kafai@fb.com
This patch changes the bpf_sk_storage_*() to take
ARG_PTR_TO_BTF_ID_SOCK_COMMON such that they will work with the pointer
returned by the bpf_skc_to_*() helpers also.
A micro benchmark has been done on a "cgroup_skb/egress" bpf program
which does a bpf_sk_storage_get(). It was driven by netperf doing
a 4096 connected UDP_STREAM test with 64bytes packet.
The stats from "kernel.bpf_stats_enabled" shows no meaningful difference.
The sk_storage_get_btf_proto, sk_storage_delete_btf_proto,
btf_sk_storage_get_proto, and btf_sk_storage_delete_proto are
no longer needed, so they are removed.
Change-Id: Ifef1303f11952714d181a3c369e154a70a864fd0
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/20200925000402.3856307-1-kafai@fb.com
The previous patch allows the networking bpf prog to use the
bpf_skc_to_*() helpers to get a PTR_TO_BTF_ID socket pointer,
e.g. "struct tcp_sock *". It allows the bpf prog to read all the
fields of the tcp_sock.
This patch changes the bpf_sk_release() and bpf_sk_*cgroup_id()
to take ARG_PTR_TO_BTF_ID_SOCK_COMMON such that they will
work with the pointer returned by the bpf_skc_to_*() helpers
also. For example, the following will work:
sk = bpf_skc_lookup_tcp(skb, tuple, tuplen, BPF_F_CURRENT_NETNS, 0);
if (!sk)
return;
tp = bpf_skc_to_tcp_sock(sk);
if (!tp) {
bpf_sk_release(sk);
return;
}
lsndtime = tp->lsndtime;
/* Pass tp to bpf_sk_release() will also work */
bpf_sk_release(tp);
Since PTR_TO_BTF_ID could be NULL, the helper taking
ARG_PTR_TO_BTF_ID_SOCK_COMMON has to check for NULL at runtime.
A btf_id of "struct sock" may not always mean a fullsock. Regardless
the helper's running context may get a non-fullsock or not,
considering fullsock check/handling is pretty cheap, it is better to
keep the same verifier expectation on helper that takes ARG_PTR_TO_BTF_ID*
will be able to handle the minisock situation. In the bpf_sk_*cgroup_id()
case, it will try to get a fullsock by using sk_to_full_sk() as its
skb variant bpf_sk"b"_*cgroup_id() has already been doing.
bpf_sk_release can already handle minisock, so nothing special has to
be done.
Change-Id: Ia9823f535d2a69b6ed4c16f599faa3f8c3ac3a42
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200925000356.3856047-1-kafai@fb.com
Introduce sleepable BPF programs that can request such property for themselves
via BPF_F_SLEEPABLE flag at program load time. In such case they will be able
to use helpers like bpf_copy_from_user() that might sleep. At present only
fentry/fexit/fmod_ret and lsm programs can request to be sleepable and only
when they are attached to kernel functions that are known to allow sleeping.
The non-sleepable programs are relying on implicit rcu_read_lock() and
migrate_disable() to protect life time of programs, maps that they use and
per-cpu kernel structures used to pass info between bpf programs and the
kernel. The sleepable programs cannot be enclosed into rcu_read_lock().
migrate_disable() maps to preempt_disable() in non-RT kernels, so the progs
should not be enclosed in migrate_disable() as well. Therefore
rcu_read_lock_trace is used to protect the life time of sleepable progs.
There are many networking and tracing program types. In many cases the
'struct bpf_prog *' pointer itself is rcu protected within some other kernel
data structure and the kernel code is using rcu_dereference() to load that
program pointer and call BPF_PROG_RUN() on it. All these cases are not touched.
Instead sleepable bpf programs are allowed with bpf trampoline only. The
program pointers are hard-coded into generated assembly of bpf trampoline and
synchronize_rcu_tasks_trace() is used to protect the life time of the program.
The same trampoline can hold both sleepable and non-sleepable progs.
When rcu_read_lock_trace is held it means that some sleepable bpf program is
running from bpf trampoline. Those programs can use bpf arrays and preallocated
hash/lru maps. These map types are waiting on programs to complete via
synchronize_rcu_tasks_trace();
Updates to trampoline now has to do synchronize_rcu_tasks_trace() and
synchronize_rcu_tasks() to wait for sleepable progs to finish and for
trampoline assembly to finish.
This is the first step of introducing sleepable progs. Eventually dynamically
allocated hash maps can be allowed and networking program types can become
sleepable too.
Change-Id: I281471010348f21de4e0832dfc0265dfe85b4a0d
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20200827220114.69225-3-alexei.starovoitov@gmail.com
bpf_link_info.iter is used by link_query to return bpf_iter_link_info
to user space. Fields may be different, e.g., map_fd vs. map_id, so
we cannot reuse the exact structure. But make them similar, e.g.,
struct bpf_link_info {
/* common fields */
union {
struct { ... } raw_tracepoint;
struct { ... } tracing;
...
struct {
/* common fields for iter */
union {
struct {
__u32 map_id;
} map;
/* other structs for other targets */
};
};
};
};
so the structure is extensible the same way as bpf_iter_link_info.
Fixes: 6b0a249a301e ("bpf: Implement link_query for bpf iterators")
Change-Id: I5bb1481995ec2fa33ce79676b0cfb7594850bbd8
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200828051922.758950-1-yhs@fb.com
Adding d_path helper function that returns full path for
given 'struct path' object, which needs to be the kernel
BTF 'path' object. The path is returned in buffer provided
'buf' of size 'sz' and is zero terminated.
bpf_d_path(&file->f_path, buf, size);
The helper calls directly d_path function, so there's only
limited set of function it can be called from. Adding just
very modest set for the start.
Updating also bpf.h tools uapi header and adding 'path' to
bpf_helpers_doc.py script.
Change-Id: If390ec6189a537b730b9ae595d374cbfa83f6f5b
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-11-jolsa@kernel.org
Adds support for both bpf_{sk, inode}_storage_{get, delete} to be used
in LSM programs. These helpers are not used for tracing programs
(currently) as their usage is tied to the life-cycle of the object and
should only be used where the owning object won't be freed (when the
owning object is passed as an argument to the LSM hook). Thus, they
are safer to use in LSM hooks than tracing. Usage of local storage in
tracing programs will probably follow a per function based whitelist
approach.
Since the UAPI helper signature for bpf_sk_storage expect a bpf_sock,
it, leads to a compilation warning for LSM programs, it's also updated
to accept a void * pointer instead.
Change-Id: Ib0afe90a58aa586852d48d13c77bc91cbada9bd1
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-7-kpsingh@chromium.org
Similar to bpf_local_storage for sockets, add local storage for inodes.
The life-cycle of storage is managed with the life-cycle of the inode.
i.e. the storage is destroyed along with the owning inode.
The BPF LSM allocates an __rcu pointer to the bpf_local_storage in the
security blob which are now stackable and can co-exist with other LSMs.
Change-Id: I078273c02202a6ee3837865b6d5b307989eb9bed
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-6-kpsingh@chromium.org
Refactor the functionality in bpf_sk_storage.c so that concept of
storage linked to kernel objects can be extended to other objects like
inode, task_struct etc.
Each new local storage will still be a separate map and provide its own
set of helpers. This allows for future object specific extensions and
still share a lot of the underlying implementation.
This includes the changes suggested by Martin in:
https://lore.kernel.org/bpf/20200725013047.4006241-1-kafai@fb.com/
adding new map operations to support bpf_local_storage maps:
* storages for different kernel objects to optionally have different
memory charging strategy (map_local_storage_charge,
map_local_storage_uncharge)
* Functionality to extract the storage pointer from a pointer to the
owning object (map_owner_storage_ptr)
Co-developed-by: Martin KaFai Lau <kafai@fb.com>
Change-Id: I02da579d09e497018432efed3a876e384d0cd561
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-4-kpsingh@chromium.org
This patch is adapted from Eric's patch in an earlier discussion [1].
The TCP_SAVE_SYN currently only stores the network header and
tcp header. This patch allows it to optionally store
the mac header also if the setsockopt's optval is 2.
It requires one more bit for the "save_syn" bit field in tcp_sock.
This patch achieves this by moving the syn_smc bit next to the is_mptcp.
The syn_smc is currently used with the TCP experimental option. Since
syn_smc is only used when CONFIG_SMC is enabled, this patch also puts
the "IS_ENABLED(CONFIG_SMC)" around it like the is_mptcp did
with "IS_ENABLED(CONFIG_MPTCP)".
The mac_hdrlen is also stored in the "struct saved_syn"
to allow a quick offset from the bpf prog if it chooses to start
getting from the network header or the tcp header.
[1]: https://lore.kernel.org/netdev/CANn89iLJNWh6bkH7DNhy_kmcAexuUCccqERqe7z2QsvPhGrYPQ@mail.gmail.com/
Suggested-by: Eric Dumazet <edumazet@google.com>
Change-Id: Id12b23200ccba9017f1792fda9c8b6aec2998d38
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/bpf/20200820190123.2886935-1-kafai@fb.com
[ Note: The TCP changes here is mainly to implement the bpf
pieces into the bpf_skops_*() functions introduced
in the earlier patches. ]
The earlier effort in BPF-TCP-CC allows the TCP Congestion Control
algorithm to be written in BPF. It opens up opportunities to allow
a faster turnaround time in testing/releasing new congestion control
ideas to production environment.
The same flexibility can be extended to writing TCP header option.
It is not uncommon that people want to test new TCP header option
to improve the TCP performance. Another use case is for data-center
that has a more controlled environment and has more flexibility in
putting header options for internal only use.
For example, we want to test the idea in putting maximum delay
ACK in TCP header option which is similar to a draft RFC proposal [1].
This patch introduces the necessary BPF API and use them in the
TCP stack to allow BPF_PROG_TYPE_SOCK_OPS program to parse
and write TCP header options. It currently supports most of
the TCP packet except RST.
Supported TCP header option:
───────────────────────────
This patch allows the bpf-prog to write any option kind.
Different bpf-progs can write its own option by calling the new helper
bpf_store_hdr_opt(). The helper will ensure there is no duplicated
option in the header.
By allowing bpf-prog to write any option kind, this gives a lot of
flexibility to the bpf-prog. Different bpf-prog can write its
own option kind. It could also allow the bpf-prog to support a
recently standardized option on an older kernel.
Sockops Callback Flags:
──────────────────────
The bpf program will only be called to parse/write tcp header option
if the following newly added callback flags are enabled
in tp->bpf_sock_ops_cb_flags:
BPF_SOCK_OPS_PARSE_UNKNOWN_HDR_OPT_CB_FLAG
BPF_SOCK_OPS_PARSE_ALL_HDR_OPT_CB_FLAG
BPF_SOCK_OPS_WRITE_HDR_OPT_CB_FLAG
A few words on the PARSE CB flags. When the above PARSE CB flags are
turned on, the bpf-prog will be called on packets received
at a sk that has at least reached the ESTABLISHED state.
The parsing of the SYN-SYNACK-ACK will be discussed in the
"3 Way HandShake" section.
The default is off for all of the above new CB flags, i.e. the bpf prog
will not be called to parse or write bpf hdr option. There are
details comment on these new cb flags in the UAPI bpf.h.
sock_ops->skb_data and bpf_load_hdr_opt()
─────────────────────────────────────────
sock_ops->skb_data and sock_ops->skb_data_end covers the whole
TCP header and its options. They are read only.
The new bpf_load_hdr_opt() helps to read a particular option "kind"
from the skb_data.
Please refer to the comment in UAPI bpf.h. It has details
on what skb_data contains under different sock_ops->op.
3 Way HandShake
───────────────
The bpf-prog can learn if it is sending SYN or SYNACK by reading the
sock_ops->skb_tcp_flags.
* Passive side
When writing SYNACK (i.e. sock_ops->op == BPF_SOCK_OPS_WRITE_HDR_OPT_CB),
the received SYN skb will be available to the bpf prog. The bpf prog can
use the SYN skb (which may carry the header option sent from the remote bpf
prog) to decide what bpf header option should be written to the outgoing
SYNACK skb. The SYN packet can be obtained by getsockopt(TCP_BPF_SYN*).
More on this later. Also, the bpf prog can learn if it is in syncookie
mode (by checking sock_ops->args[0] == BPF_WRITE_HDR_TCP_SYNACK_COOKIE).
The bpf prog can store the received SYN pkt by using the existing
bpf_setsockopt(TCP_SAVE_SYN). The example in a later patch does it.
[ Note that the fullsock here is a listen sk, bpf_sk_storage
is not very useful here since the listen sk will be shared
by many concurrent connection requests.
Extending bpf_sk_storage support to request_sock will add weight
to the minisock and it is not necessary better than storing the
whole ~100 bytes SYN pkt. ]
When the connection is established, the bpf prog will be called
in the existing PASSIVE_ESTABLISHED_CB callback. At that time,
the bpf prog can get the header option from the saved syn and
then apply the needed operation to the newly established socket.
The later patch will use the max delay ack specified in the SYN
header and set the RTO of this newly established connection
as an example.
The received ACK (that concludes the 3WHS) will also be available to
the bpf prog during PASSIVE_ESTABLISHED_CB through the sock_ops->skb_data.
It could be useful in syncookie scenario. More on this later.
There is an existing getsockopt "TCP_SAVED_SYN" to return the whole
saved syn pkt which includes the IP[46] header and the TCP header.
A few "TCP_BPF_SYN*" getsockopt has been added to allow specifying where to
start getting from, e.g. starting from TCP header, or from IP[46] header.
The new getsockopt(TCP_BPF_SYN*) will also know where it can get
the SYN's packet from:
- (a) the just received syn (available when the bpf prog is writing SYNACK)
and it is the only way to get SYN during syncookie mode.
or
- (b) the saved syn (available in PASSIVE_ESTABLISHED_CB and also other
existing CB).
The bpf prog does not need to know where the SYN pkt is coming from.
The getsockopt(TCP_BPF_SYN*) will hide this details.
Similarly, a flags "BPF_LOAD_HDR_OPT_TCP_SYN" is also added to
bpf_load_hdr_opt() to read a particular header option from the SYN packet.
* Fastopen
Fastopen should work the same as the regular non fastopen case.
This is a test in a later patch.
* Syncookie
For syncookie, the later example patch asks the active
side's bpf prog to resend the header options in ACK. The server
can use bpf_load_hdr_opt() to look at the options in this
received ACK during PASSIVE_ESTABLISHED_CB.
* Active side
The bpf prog will get a chance to write the bpf header option
in the SYN packet during WRITE_HDR_OPT_CB. The received SYNACK
pkt will also be available to the bpf prog during the existing
ACTIVE_ESTABLISHED_CB callback through the sock_ops->skb_data
and bpf_load_hdr_opt().
* Turn off header CB flags after 3WHS
If the bpf prog does not need to write/parse header options
beyond the 3WHS, the bpf prog can clear the bpf_sock_ops_cb_flags
to avoid being called for header options.
Or the bpf-prog can select to leave the UNKNOWN_HDR_OPT_CB_FLAG on
so that the kernel will only call it when there is option that
the kernel cannot handle.
[1]: draft-wang-tcpm-low-latency-opt-00
https://tools.ietf.org/html/draft-wang-tcpm-low-latency-opt-00
Change-Id: If5c8cad06573cc8f9712fb0b0761b10df24d180d
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200820190104.2885895-1-kafai@fb.com
The bpf prog needs to parse the SYN header to learn what options have
been sent by the peer's bpf-prog before writing its options into SYNACK.
This patch adds a "syn_skb" arg to tcp_make_synack() and send_synack().
This syn_skb will eventually be made available (as read-only) to the
bpf prog. This will be the only SYN packet available to the bpf
prog during syncookie. For other regular cases, the bpf prog can
also use the saved_syn.
When writing options, the bpf prog will first be called to tell the
kernel its required number of bytes. It is done by the new
bpf_skops_hdr_opt_len(). The bpf prog will only be called when the new
BPF_SOCK_OPS_WRITE_HDR_OPT_CB_FLAG is set in tp->bpf_sock_ops_cb_flags.
When the bpf prog returns, the kernel will know how many bytes are needed
and then update the "*remaining" arg accordingly. 4 byte alignment will
be included in the "*remaining" before this function returns. The 4 byte
aligned number of bytes will also be stored into the opts->bpf_opt_len.
"bpf_opt_len" is a newly added member to the struct tcp_out_options.
Then the new bpf_skops_write_hdr_opt() will call the bpf prog to write the
header options. The bpf prog is only called if it has reserved spaces
before (opts->bpf_opt_len > 0).
The bpf prog is the last one getting a chance to reserve header space
and writing the header option.
These two functions are half implemented to highlight the changes in
TCP stack. The actual codes preparing the bpf running context and
invoking the bpf prog will be added in the later patch with other
necessary bpf pieces.
Change-Id: If81bbf6ba9cd4a9ee363a447e780e9b0833ee92a
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/bpf/20200820190052.2885316-1-kafai@fb.com
The patch adds a function bpf_skops_parse_hdr().
It will call the bpf prog to parse the TCP header received at
a tcp_sock that has at least reached the ESTABLISHED state.
For the packets received during the 3WHS (SYN, SYNACK and ACK),
the received skb will be available to the bpf prog during the callback
in bpf_skops_established() introduced in the previous patch and
in the bpf_skops_write_hdr_opt() that will be added in the
next patch.
Calling bpf prog to parse header is controlled by two new flags in
tp->bpf_sock_ops_cb_flags:
BPF_SOCK_OPS_PARSE_UNKNOWN_HDR_OPT_CB_FLAG and
BPF_SOCK_OPS_PARSE_ALL_HDR_OPT_CB_FLAG.
When BPF_SOCK_OPS_PARSE_UNKNOWN_HDR_OPT_CB_FLAG is set,
the bpf prog will only be called when there is unknown
option in the TCP header.
When BPF_SOCK_OPS_PARSE_ALL_HDR_OPT_CB_FLAG is set,
the bpf prog will be called on all received TCP header.
This function is half implemented to highlight the changes in
TCP stack. The actual codes preparing the bpf running context and
invoking the bpf prog will be added in the later patch with other
necessary bpf pieces.
Change-Id: Ia70614c4388ce1eab849e426140f7c66bf68e784
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/bpf/20200820190046.2885054-1-kafai@fb.com
This patch adds bpf_setsockopt(TCP_BPF_RTO_MIN) to allow bpf prog
to set the min rto of a connection. It could be used together
with the earlier patch which has added bpf_setsockopt(TCP_BPF_DELACK_MAX).
A later selftest patch will communicate the max delay ack in a
bpf tcp header option and then the receiving side can use
bpf_setsockopt(TCP_BPF_RTO_MIN) to set a shorter rto.
Change-Id: I32e313838af527d12b7e5f16036481bcaefa1e7b
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200820190027.2884170-1-kafai@fb.com
This change is mostly from an internal patch and adapts it from sysctl
config to the bpf_setsockopt setup.
The bpf_prog can set the max delay ack by using
bpf_setsockopt(TCP_BPF_DELACK_MAX). This max delay ack can be communicated
to its peer through bpf header option. The receiving peer can then use
this max delay ack and set a potentially lower rto by using
bpf_setsockopt(TCP_BPF_RTO_MIN) which will be introduced
in the next patch.
Another later selftest patch will also use it like the above to show
how to write and parse bpf tcp header option.
Change-Id: I18bc0cb9551922db5056cb817b9690c40c5983e2
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200820190021.2884000-1-kafai@fb.com
This patch implemented bpf_link callback functions
show_fdinfo and fill_link_info to support link_query
interface.
The general interface for show_fdinfo and fill_link_info
will print/fill the target_name. Each targets can
register show_fdinfo and fill_link_info callbacks
to print/fill more target specific information.
For example, the below is a fdinfo result for a bpf
task iterator.
$ cat /proc/1749/fdinfo/7
pos: 0
flags: 02000000
mnt_id: 14
link_type: iter
link_id: 11
prog_tag: 990e1f8152f7e54f
prog_id: 59
target_name: task
Change-Id: I9c7644bb4d1235c00c93da211fbf654d585b1f6e
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200821184418.574122-1-yhs@fb.com
Due to bpf tree fix merge, bpf_ringbuf_output() signature ended up with int as
a return type, while all other helpers got converted to returning long. So fix
it in bpf-next now.
Fixes: b0659d8a950d ("bpf: Fix definition of bpf_ringbuf_output() helper in UAPI comments")
Change-Id: Ia6b0bfbb3d085244c12e0a3063dfe4758a2ca9ce
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200727224715.652037-1-andriin@fb.com
The bpf iterator for map elements are implemented.
The bpf program will receive four parameters:
bpf_iter_meta *meta: the meta data
bpf_map *map: the bpf_map whose elements are traversed
void *key: the key of one element
void *value: the value of the same element
Here, meta and map pointers are always valid, and
key has register type PTR_TO_RDONLY_BUF_OR_NULL and
value has register type PTR_TO_RDWR_BUF_OR_NULL.
The kernel will track the access range of key and value
during verification time. Later, these values will be compared
against the values in the actual map to ensure all accesses
are within range.
A new field iter_seq_info is added to bpf_map_ops which
is used to add map type specific information, i.e., seq_ops,
init/fini seq_file func and seq_file private data size.
Subsequent patches will have actual implementation
for bpf_map_ops->iter_seq_info.
In user space, BPF_ITER_LINK_MAP_FD needs to be
specified in prog attr->link_create.flags, which indicates
that attr->link_create.target_fd is a map_fd.
The reason for such an explicit flag is for possible
future cases where one bpf iterator may allow more than
one possible customization, e.g., pid and cgroup id for
task_file.
Current kernel internal implementation only allows
the target to register at most one required bpf_iter_link_info.
To support the above case, optional bpf_iter_link_info's
are needed, the target can be extended to register such link
infos, and user provided link_info needs to match one of
target supported ones.
Change-Id: I697a788afd3a0c77092d00546a6840cfbc512811
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200723184112.590360-1-yhs@fb.com
Introduce the capability to attach an eBPF program to cpumap entries.
The idea behind this feature is to add the possibility to define on
which CPU run the eBPF program if the underlying hw does not support
RSS. Current supported verdicts are XDP_DROP and XDP_PASS.
This patch has been tested on Marvell ESPRESSObin using xdp_redirect_cpu
sample available in the kernel tree to identify possible performance
regressions. Results show there are no observable differences in
packet-per-second:
$./xdp_redirect_cpu --progname xdp_cpu_map0 --dev eth0 --cpu 1
rx: 354.8 Kpps
rx: 356.0 Kpps
rx: 356.8 Kpps
rx: 356.3 Kpps
rx: 356.6 Kpps
rx: 356.6 Kpps
rx: 356.7 Kpps
rx: 355.8 Kpps
rx: 356.8 Kpps
rx: 356.8 Kpps
Co-developed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Change-Id: Iada1f8af4d7a68db203944869c48528f2c4ec969
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/5c9febdf903d810b3415732e5cd98491d7d9067a.1594734381.git.lorenzo@kernel.org
Introduce helper bpf_get_task_stack(), which dumps stack trace of given
task. This is different to bpf_get_stack(), which gets stack track of
current task. One potential use case of bpf_get_task_stack() is to call
it from bpf_iter__task and dump all /proc/<pid>/stack to a seq_file.
bpf_get_task_stack() uses stack_trace_save_tsk() instead of
get_perf_callchain() for kernel stack. The benefit of this choice is that
stack_trace_save_tsk() doesn't require changes in arch/. The downside of
using stack_trace_save_tsk() is that stack_trace_save_tsk() dumps the
stack trace to unsigned long array. For 32-bit systems, we need to
translate it to u64 array.
Change-Id: Ief4d6331116f2df922da24cd4cff87b023e861e7
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200630062846.664389-3-songliubraving@fb.com
The helper is used in tracing programs to cast a socket
pointer to a tcp6_sock pointer.
The return value could be NULL if the casting is illegal.
A new helper return type RET_PTR_TO_BTF_ID_OR_NULL is added
so the verifier is able to deduce proper return types for the helper.
Different from the previous BTF_ID based helpers,
the bpf_skc_to_tcp6_sock() argument can be several possible
btf_ids. More specifically, all possible socket data structures
with sock_common appearing in the first in the memory layout.
This patch only added socket types related to tcp and udp.
All possible argument btf_id and return value btf_id
for helper bpf_skc_to_tcp6_sock() are pre-calculcated and
cached. In the future, it is even possible to precompute
these btf_id's at kernel build time.
Change-Id: Ie8449335dbb1f9be85b2d3bcc2d6cfc8e53600cb
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200623230809.3988195-1-yhs@fb.com
This patch adds support of SO_KEEPALIVE flag and TCP related options
to bpf_setsockopt() routine. This is helpful if we want to enable or tune
TCP keepalive for applications which don't do it in the userspace code.
v3:
- update kernel-doc in uapi (Nikita Vetoshkin <nekto0n@yandex-team.ru>)
v4:
- update kernel-doc in tools too (Alexei Starovoitov)
- add test to selftests (Alexei Starovoitov)
Change-Id: I5bd3faf283a69e80b01d9e09557c3f338c8e3c95
Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200620153052.9439-3-zeil@yandex-team.ru
When producing the bpf-helpers.7 man page from the documentation from
the BPF user space header file, rst2man complains:
<stdin>:2636: (ERROR/3) Unexpected indentation.
<stdin>:2640: (WARNING/2) Block quote ends without a blank line; unexpected unindent.
Let's fix formatting for the relevant chunk (item list in
bpf_ringbuf_query()'s description), and for a couple other functions.
Change-Id: I8db86552af9d5620e2413b73496ae4b2c01a0fcc
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200623153935.6215-1-quentin@isovalent.com
Switch most of BPF helper definitions from returning int to long. These
definitions are coming from comments in BPF UAPI header and are used to
generate bpf_helper_defs.h (under libbpf) to be later included and used from
BPF programs.
In actual in-kernel implementation, all the helpers are defined as returning
u64, but due to some historical reasons, most of them are actually defined as
returning int in UAPI (usually, to return 0 on success, and negative value on
error).
This actually causes Clang to quite often generate sub-optimal code, because
compiler believes that return value is 32-bit, and in a lot of cases has to be
up-converted (usually with a pair of 32-bit bit shifts) to 64-bit values,
before they can be used further in BPF code.
Besides just "polluting" the code, these 32-bit shifts quite often cause
problems for cases in which return value matters. This is especially the case
for the family of bpf_probe_read_str() functions. There are few other similar
helpers (e.g., bpf_read_branch_records()), in which return value is used by
BPF program logic to record variable-length data and process it. For such
cases, BPF program logic carefully manages offsets within some array or map to
read variable-length data. For such uses, it's crucial for BPF verifier to
track possible range of register values to prove that all the accesses happen
within given memory bounds. Those extraneous zero-extending bit shifts,
inserted by Clang (and quite often interleaved with other code, which makes
the issues even more challenging and sometimes requires employing extra
per-variable compiler barriers), throws off verifier logic and makes it mark
registers as having unknown variable offset. We'll study this pattern a bit
later below.
Another common pattern is to check return of BPF helper for non-zero state to
detect error conditions and attempt alternative actions in such case. Even in
this simple and straightforward case, this 32-bit vs BPF's native 64-bit mode
quite often leads to sub-optimal and unnecessary extra code. We'll look at
this pattern as well.
Clang's BPF target supports two modes of code generation: ALU32, in which it
is capable of using lower 32-bit parts of registers, and no-ALU32, in which
only full 64-bit registers are being used. ALU32 mode somewhat mitigates the
above described problems, but not in all cases.
This patch switches all the cases in which BPF helpers return 0 or negative
error from returning int to returning long. It is shown below that such change
in definition leads to equivalent or better code. No-ALU32 mode benefits more,
but ALU32 mode doesn't degrade or still gets improved code generation.
Another class of cases switched from int to long are bpf_probe_read_str()-like
helpers, which encode successful case as non-negative values, while still
returning negative value for errors.
In all of such cases, correctness is preserved due to two's complement
encoding of negative values and the fact that all helpers return values with
32-bit absolute value. Two's complement ensures that for negative values
higher 32 bits are all ones and when truncated, leave valid negative 32-bit
value with the same value. Non-negative values have upper 32 bits set to zero
and similarly preserve value when high 32 bits are truncated. This means that
just casting to int/u32 is correct and efficient (and in ALU32 mode doesn't
require any extra shifts).
To minimize the chances of regressions, two code patterns were investigated,
as mentioned above. For both patterns, BPF assembly was analyzed in
ALU32/NO-ALU32 compiler modes, both with current 32-bit int return type and
new 64-bit long return type.
Case 1. Variable-length data reading and concatenation. This is quite
ubiquitous pattern in tracing/monitoring applications, reading data like
process's environment variables, file path, etc. In such case, many pieces of
string-like variable-length data are read into a single big buffer, and at the
end of the process, only a part of array containing actual data is sent to
user-space for further processing. This case is tested in test_varlen.c
selftest (in the next patch). Code flow is roughly as follows:
void *payload = &sample->payload;
u64 len;
len = bpf_probe_read_kernel_str(payload, MAX_SZ1, &source_data1);
if (len <= MAX_SZ1) {
payload += len;
sample->len1 = len;
}
len = bpf_probe_read_kernel_str(payload, MAX_SZ2, &source_data2);
if (len <= MAX_SZ2) {
payload += len;
sample->len2 = len;
}
/* and so on */
sample->total_len = payload - &sample->payload;
/* send over, e.g., perf buffer */
There could be two variations with slightly different code generated: when len
is 64-bit integer and when it is 32-bit integer. Both variations were analysed.
BPF assembly instructions between two successive invocations of
bpf_probe_read_kernel_str() were used to check code regressions. Results are
below, followed by short analysis. Left side is using helpers with int return
type, the right one is after the switch to long.
ALU32 + INT ALU32 + LONG
=========== ============
64-BIT (13 insns): 64-BIT (10 insns):
------------------------------------ ------------------------------------
17: call 115 17: call 115
18: if w0 > 256 goto +9 <LBB0_4> 18: if r0 > 256 goto +6 <LBB0_4>
19: w1 = w0 19: r1 = 0 ll
20: r1 <<= 32 21: *(u64 *)(r1 + 0) = r0
21: r1 s>>= 32 22: r6 = 0 ll
22: r2 = 0 ll 24: r6 += r0
24: *(u64 *)(r2 + 0) = r1 00000000000000c8 <LBB0_4>:
25: r6 = 0 ll 25: r1 = r6
27: r6 += r1 26: w2 = 256
00000000000000e0 <LBB0_4>: 27: r3 = 0 ll
28: r1 = r6 29: call 115
29: w2 = 256
30: r3 = 0 ll
32: call 115
32-BIT (11 insns): 32-BIT (12 insns):
------------------------------------ ------------------------------------
17: call 115 17: call 115
18: if w0 > 256 goto +7 <LBB1_4> 18: if w0 > 256 goto +8 <LBB1_4>
19: r1 = 0 ll 19: r1 = 0 ll
21: *(u32 *)(r1 + 0) = r0 21: *(u32 *)(r1 + 0) = r0
22: w1 = w0 22: r0 <<= 32
23: r6 = 0 ll 23: r0 >>= 32
25: r6 += r1 24: r6 = 0 ll
00000000000000d0 <LBB1_4>: 26: r6 += r0
26: r1 = r6 00000000000000d8 <LBB1_4>:
27: w2 = 256 27: r1 = r6
28: r3 = 0 ll 28: w2 = 256
30: call 115 29: r3 = 0 ll
31: call 115
In ALU32 mode, the variant using 64-bit length variable clearly wins and
avoids unnecessary zero-extension bit shifts. In practice, this is even more
important and good, because BPF code won't need to do extra checks to "prove"
that payload/len are within good bounds.
32-bit len is one instruction longer. Clang decided to do 64-to-32 casting
with two bit shifts, instead of equivalent `w1 = w0` assignment. The former
uses extra register. The latter might potentially lose some range information,
but not for 32-bit value. So in this case, verifier infers that r0 is [0, 256]
after check at 18:, and shifting 32 bits left/right keeps that range intact.
We should probably look into Clang's logic and see why it chooses bitshifts
over sub-register assignments for this.
NO-ALU32 + INT NO-ALU32 + LONG
============== ===============
64-BIT (14 insns): 64-BIT (10 insns):
------------------------------------ ------------------------------------
17: call 115 17: call 115
18: r0 <<= 32 18: if r0 > 256 goto +6 <LBB0_4>
19: r1 = r0 19: r1 = 0 ll
20: r1 >>= 32 21: *(u64 *)(r1 + 0) = r0
21: if r1 > 256 goto +7 <LBB0_4> 22: r6 = 0 ll
22: r0 s>>= 32 24: r6 += r0
23: r1 = 0 ll 00000000000000c8 <LBB0_4>:
25: *(u64 *)(r1 + 0) = r0 25: r1 = r6
26: r6 = 0 ll 26: r2 = 256
28: r6 += r0 27: r3 = 0 ll
00000000000000e8 <LBB0_4>: 29: call 115
29: r1 = r6
30: r2 = 256
31: r3 = 0 ll
33: call 115
32-BIT (13 insns): 32-BIT (13 insns):
------------------------------------ ------------------------------------
17: call 115 17: call 115
18: r1 = r0 18: r1 = r0
19: r1 <<= 32 19: r1 <<= 32
20: r1 >>= 32 20: r1 >>= 32
21: if r1 > 256 goto +6 <LBB1_4> 21: if r1 > 256 goto +6 <LBB1_4>
22: r2 = 0 ll 22: r2 = 0 ll
24: *(u32 *)(r2 + 0) = r0 24: *(u32 *)(r2 + 0) = r0
25: r6 = 0 ll 25: r6 = 0 ll
27: r6 += r1 27: r6 += r1
00000000000000e0 <LBB1_4>: 00000000000000e0 <LBB1_4>:
28: r1 = r6 28: r1 = r6
29: r2 = 256 29: r2 = 256
30: r3 = 0 ll 30: r3 = 0 ll
32: call 115 32: call 115
In NO-ALU32 mode, for the case of 64-bit len variable, Clang generates much
superior code, as expected, eliminating unnecessary bit shifts. For 32-bit
len, code is identical.
So overall, only ALU-32 32-bit len case is more-or-less equivalent and the
difference stems from internal Clang decision, rather than compiler lacking
enough information about types.
Case 2. Let's look at the simpler case of checking return result of BPF helper
for errors. The code is very simple:
long bla;
if (bpf_probe_read_kenerl(&bla, sizeof(bla), 0))
return 1;
else
return 0;
ALU32 + CHECK (9 insns) ALU32 + CHECK (9 insns)
==================================== ====================================
0: r1 = r10 0: r1 = r10
1: r1 += -8 1: r1 += -8
2: w2 = 8 2: w2 = 8
3: r3 = 0 3: r3 = 0
4: call 113 4: call 113
5: w1 = w0 5: r1 = r0
6: w0 = 1 6: w0 = 1
7: if w1 != 0 goto +1 <LBB2_2> 7: if r1 != 0 goto +1 <LBB2_2>
8: w0 = 0 8: w0 = 0
0000000000000048 <LBB2_2>: 0000000000000048 <LBB2_2>:
9: exit 9: exit
Almost identical code, the only difference is the use of full register
assignment (r1 = r0) vs half-registers (w1 = w0) in instruction #5. On 32-bit
architectures, new BPF assembly might be slightly less optimal, in theory. But
one can argue that's not a big issue, given that use of full registers is
still prevalent (e.g., for parameter passing).
NO-ALU32 + CHECK (11 insns) NO-ALU32 + CHECK (9 insns)
==================================== ====================================
0: r1 = r10 0: r1 = r10
1: r1 += -8 1: r1 += -8
2: r2 = 8 2: r2 = 8
3: r3 = 0 3: r3 = 0
4: call 113 4: call 113
5: r1 = r0 5: r1 = r0
6: r1 <<= 32 6: r0 = 1
7: r1 >>= 32 7: if r1 != 0 goto +1 <LBB2_2>
8: r0 = 1 8: r0 = 0
9: if r1 != 0 goto +1 <LBB2_2> 0000000000000048 <LBB2_2>:
10: r0 = 0 9: exit
0000000000000058 <LBB2_2>:
11: exit
NO-ALU32 is a clear improvement, getting rid of unnecessary zero-extension bit
shifts.
Change-Id: Ia2183c10e4ca093a5ef5040ce651b3fe3b3ad817
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200623032224.4020118-1-andriin@fb.com
Fix definition of bpf_ringbuf_output() in UAPI header comments, which is used
to generate libbpf's bpf_helper_defs.h header. Return value is a number (error
code), not a pointer.
Fixes: 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it")
Change-Id: Iecd4e85808338a32a0e93576370b3574fd668d9f
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200615214926.3638836-1-andriin@fb.com
Add a bpf_csum_level() helper which BPF programs can use in combination
with bpf_skb_adjust_room() when they pass in BPF_F_ADJ_ROOM_NO_CSUM_RESET
flag to the latter to avoid falling back to CHECKSUM_NONE.
The bpf_csum_level() allows to adjust CHECKSUM_UNNECESSARY skb->csum_levels
via BPF_CSUM_LEVEL_{INC,DEC} which calls __skb_{incr,decr}_checksum_unnecessary()
on the skb. The helper also allows a BPF_CSUM_LEVEL_RESET which sets the skb's
csum to CHECKSUM_NONE as well as a BPF_CSUM_LEVEL_QUERY to just return the
current level. Without this helper, there is no way to otherwise adjust the
skb->csum_level. I did not add an extra dummy flags as there is plenty of free
bitspace in level argument itself iff ever needed in future.
Change-Id: Ib2ef00b0de599ec5414e22d4ce7d33d2c831b331
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/279ae3717cb3d03c0ffeb511493c93c450a01e1a.1591108731.git.daniel@iogearbox.net
Lorenz recently reported:
In our TC classifier cls_redirect [0], we use the following sequence of
helper calls to decapsulate a GUE (basically IP + UDP + custom header)
encapsulated packet:
bpf_skb_adjust_room(skb, -encap_len, BPF_ADJ_ROOM_MAC, BPF_F_ADJ_ROOM_FIXED_GSO)
bpf_redirect(skb->ifindex, BPF_F_INGRESS)
It seems like some checksums of the inner headers are not validated in
this case. For example, a TCP SYN packet with invalid TCP checksum is
still accepted by the network stack and elicits a SYN ACK. [...]
That is, we receive the following packet from the driver:
| ETH | IP | UDP | GUE | IP | TCP |
skb->ip_summed == CHECKSUM_UNNECESSARY
ip_summed is CHECKSUM_UNNECESSARY because our NICs do rx checksum offloading.
On this packet we run skb_adjust_room_mac(-encap_len), and get the following:
| ETH | IP | TCP |
skb->ip_summed == CHECKSUM_UNNECESSARY
Note that ip_summed is still CHECKSUM_UNNECESSARY. After bpf_redirect()'ing
into the ingress, we end up in tcp_v4_rcv(). There, skb_checksum_init() is
turned into a no-op due to CHECKSUM_UNNECESSARY.
The bpf_skb_adjust_room() helper is not aware of protocol specifics. Internally,
it handles the CHECKSUM_COMPLETE case via skb_postpull_rcsum(), but that does
not cover CHECKSUM_UNNECESSARY. In this case skb->csum_level of the original
skb prior to bpf_skb_adjust_room() call was 0, that is, covering UDP. Right now
there is no way to adjust the skb->csum_level. NICs that have checksum offload
disabled (CHECKSUM_NONE) or that support CHECKSUM_COMPLETE are not affected.
Use a safe default for CHECKSUM_UNNECESSARY by resetting to CHECKSUM_NONE and
add a flag to the helper called BPF_F_ADJ_ROOM_NO_CSUM_RESET that allows users
from opting out. Opting out is useful for the case where we don't remove/add
full protocol headers, or for the case where a user wants to adjust the csum
level manually e.g. through bpf_csum_level() helper that is added in subsequent
patch.
The bpf_skb_proto_{4_to_6,6_to_4}() for NAT64/46 translation from the BPF
bpf_skb_change_proto() helper uses bpf_skb_net_hdr_{push,pop}() pair internally
as well but doesn't change layers, only transitions between v4 to v6 and vice
versa, therefore no adoption is required there.
[0] https://lore.kernel.org/bpf/20200424185556.7358-1-lmb@cloudflare.com/
Fixes: 2be7e212d5 ("bpf: add bpf_skb_adjust_room helper")
Reported-by: Lorenz Bauer <lmb@cloudflare.com>
Reported-by: Alan Maguire <alan.maguire@oracle.com>
Change-Id: I11dcdb6780894d2adcb85a6c8f725dc1aadcdc80
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/CACAyw9-uU_52esMd1JjuA80fRPHJv5vsSg8GnfW3t_qDU4aVKQ@mail.gmail.com/
Link: https://lore.kernel.org/bpf/11a90472e7cce83e76ddbfce81fdfce7bfc68808.1591108731.git.daniel@iogearbox.net
Extend bpf() syscall subcommands that operate on bpf_link, that is
LINK_CREATE, LINK_UPDATE, OBJ_GET_INFO, to accept attach types tied to
network namespaces (only flow dissector at the moment).
Link-based and prog-based attachment can be used interchangeably, but only
one can exist at a time. Attempts to attach a link when a prog is already
attached directly, and the other way around, will be met with -EEXIST.
Attempts to detach a program when link exists result in -EINVAL.
Attachment of multiple links of same attach type to one netns is not
supported with the intention to lift the restriction when a use-case
presents itself. Because of that link create returns -E2BIG when trying to
create another netns link, when one already exists.
Link-based attachments to netns don't keep a netns alive by holding a ref
to it. Instead links get auto-detached from netns when the latter is being
destroyed, using a pernet pre_exit callback.
When auto-detached, link lives in defunct state as long there are open FDs
for it. -ENOLINK is returned if a user tries to update a defunct link.
Because bpf_link to netns doesn't hold a ref to struct net, special care is
taken when releasing, updating, or filling link info. The netns might be
getting torn down when any of these link operations are in progress. That
is why auto-detach and update/release/fill_info are synchronized by the
same mutex. Also, link ops have to always check if auto-detach has not
happened yet and if netns is still alive (refcnt > 0).
Change-Id: I54b288703e706c5bc1a493166d0290fcff7079ef
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-5-jakub@cloudflare.com
Add xdp_txq_info as the Tx counterpart to xdp_rxq_info. At the
moment only the device is added. Other fields (queue_index)
can be added as use cases arise.
>From a UAPI perspective, add egress_ifindex to xdp context for
bpf programs to see the Tx device.
Update the verifier to only allow accesses to egress_ifindex by
XDP programs with BPF_XDP_DEVMAP expected attach type.
Change-Id: I32a0d5e4cf6dccff3ead8dd6dcbf63caaf091b42
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200529220716.75383-4-dsahern@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add BPF_XDP_DEVMAP attach type for use with programs associated with a
DEVMAP entry.
Allow DEVMAPs to associate a program with a device entry by adding
a bpf_prog.fd to 'struct bpf_devmap_val'. Values read show the program
id, so the fd and id are a union. bpf programs can get access to the
struct via vmlinux.h.
The program associated with the fd must have type XDP with expected
attach type BPF_XDP_DEVMAP. When a program is associated with a device
index, the program is run on an XDP_REDIRECT and before the buffer is
added to the per-cpu queue. At this point rxq data is still valid; the
next patch adds tx device information allowing the prorgam to see both
ingress and egress device indices.
XDP generic is skb based and XDP programs do not work with skb's. Block
the use case by walking maps used by a program that is to be attached
via xdpgeneric and fail if any of them are DEVMAP / DEVMAP_HASH with
Block attach of BPF_XDP_DEVMAP programs to devices.
Also avoid redefining fallthrough in bifrost.
Change-Id: I1ee2823f1562096bc342d40fd35534e9bb04da11
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20200529220716.75383-3-dsahern@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit adds a new MPSC ring buffer implementation into BPF ecosystem,
which allows multiple CPUs to submit data to a single shared ring buffer. On
the consumption side, only single consumer is assumed.
Motivation
----------
There are two distinctive motivators for this work, which are not satisfied by
existing perf buffer, which prompted creation of a new ring buffer
implementation.
- more efficient memory utilization by sharing ring buffer across CPUs;
- preserving ordering of events that happen sequentially in time, even
across multiple CPUs (e.g., fork/exec/exit events for a task).
These two problems are independent, but perf buffer fails to satisfy both.
Both are a result of a choice to have per-CPU perf ring buffer. Both can be
also solved by having an MPSC implementation of ring buffer. The ordering
problem could technically be solved for perf buffer with some in-kernel
counting, but given the first one requires an MPSC buffer, the same solution
would solve the second problem automatically.
Semantics and APIs
------------------
Single ring buffer is presented to BPF programs as an instance of BPF map of
type BPF_MAP_TYPE_RINGBUF. Two other alternatives considered, but ultimately
rejected.
One way would be to, similar to BPF_MAP_TYPE_PERF_EVENT_ARRAY, make
BPF_MAP_TYPE_RINGBUF could represent an array of ring buffers, but not enforce
"same CPU only" rule. This would be more familiar interface compatible with
existing perf buffer use in BPF, but would fail if application needed more
advanced logic to lookup ring buffer by arbitrary key. HASH_OF_MAPS addresses
this with current approach. Additionally, given the performance of BPF
ringbuf, many use cases would just opt into a simple single ring buffer shared
among all CPUs, for which current approach would be an overkill.
Another approach could introduce a new concept, alongside BPF map, to
represent generic "container" object, which doesn't necessarily have key/value
interface with lookup/update/delete operations. This approach would add a lot
of extra infrastructure that has to be built for observability and verifier
support. It would also add another concept that BPF developers would have to
familiarize themselves with, new syntax in libbpf, etc. But then would really
provide no additional benefits over the approach of using a map.
BPF_MAP_TYPE_RINGBUF doesn't support lookup/update/delete operations, but so
doesn't few other map types (e.g., queue and stack; array doesn't support
delete, etc).
The approach chosen has an advantage of re-using existing BPF map
infrastructure (introspection APIs in kernel, libbpf support, etc), being
familiar concept (no need to teach users a new type of object in BPF program),
and utilizing existing tooling (bpftool). For common scenario of using
a single ring buffer for all CPUs, it's as simple and straightforward, as
would be with a dedicated "container" object. On the other hand, by being
a map, it can be combined with ARRAY_OF_MAPS and HASH_OF_MAPS map-in-maps to
implement a wide variety of topologies, from one ring buffer for each CPU
(e.g., as a replacement for perf buffer use cases), to a complicated
application hashing/sharding of ring buffers (e.g., having a small pool of
ring buffers with hashed task's tgid being a look up key to preserve order,
but reduce contention).
Key and value sizes are enforced to be zero. max_entries is used to specify
the size of ring buffer and has to be a power of 2 value.
There are a bunch of similarities between perf buffer
(BPF_MAP_TYPE_PERF_EVENT_ARRAY) and new BPF ring buffer semantics:
- variable-length records;
- if there is no more space left in ring buffer, reservation fails, no
blocking;
- memory-mappable data area for user-space applications for ease of
consumption and high performance;
- epoll notifications for new incoming data;
- but still the ability to do busy polling for new data to achieve the
lowest latency, if necessary.
BPF ringbuf provides two sets of APIs to BPF programs:
- bpf_ringbuf_output() allows to *copy* data from one place to a ring
buffer, similarly to bpf_perf_event_output();
- bpf_ringbuf_reserve()/bpf_ringbuf_commit()/bpf_ringbuf_discard() APIs
split the whole process into two steps. First, a fixed amount of space is
reserved. If successful, a pointer to a data inside ring buffer data area
is returned, which BPF programs can use similarly to a data inside
array/hash maps. Once ready, this piece of memory is either committed or
discarded. Discard is similar to commit, but makes consumer ignore the
record.
bpf_ringbuf_output() has disadvantage of incurring extra memory copy, because
record has to be prepared in some other place first. But it allows to submit
records of the length that's not known to verifier beforehand. It also closely
matches bpf_perf_event_output(), so will simplify migration significantly.
bpf_ringbuf_reserve() avoids the extra copy of memory by providing a memory
pointer directly to ring buffer memory. In a lot of cases records are larger
than BPF stack space allows, so many programs have use extra per-CPU array as
a temporary heap for preparing sample. bpf_ringbuf_reserve() avoid this needs
completely. But in exchange, it only allows a known constant size of memory to
be reserved, such that verifier can verify that BPF program can't access
memory outside its reserved record space. bpf_ringbuf_output(), while slightly
slower due to extra memory copy, covers some use cases that are not suitable
for bpf_ringbuf_reserve().
The difference between commit and discard is very small. Discard just marks
a record as discarded, and such records are supposed to be ignored by consumer
code. Discard is useful for some advanced use-cases, such as ensuring
all-or-nothing multi-record submission, or emulating temporary malloc()/free()
within single BPF program invocation.
Each reserved record is tracked by verifier through existing
reference-tracking logic, similar to socket ref-tracking. It is thus
impossible to reserve a record, but forget to submit (or discard) it.
bpf_ringbuf_query() helper allows to query various properties of ring buffer.
Currently 4 are supported:
- BPF_RB_AVAIL_DATA returns amount of unconsumed data in ring buffer;
- BPF_RB_RING_SIZE returns the size of ring buffer;
- BPF_RB_CONS_POS/BPF_RB_PROD_POS returns current logical possition of
consumer/producer, respectively.
Returned values are momentarily snapshots of ring buffer state and could be
off by the time helper returns, so this should be used only for
debugging/reporting reasons or for implementing various heuristics, that take
into account highly-changeable nature of some of those characteristics.
One such heuristic might involve more fine-grained control over poll/epoll
notifications about new data availability in ring buffer. Together with
BPF_RB_NO_WAKEUP/BPF_RB_FORCE_WAKEUP flags for output/commit/discard helpers,
it allows BPF program a high degree of control and, e.g., more efficient
batched notifications. Default self-balancing strategy, though, should be
adequate for most applications and will work reliable and efficiently already.
Design and implementation
-------------------------
This reserve/commit schema allows a natural way for multiple producers, either
on different CPUs or even on the same CPU/in the same BPF program, to reserve
independent records and work with them without blocking other producers. This
means that if BPF program was interruped by another BPF program sharing the
same ring buffer, they will both get a record reserved (provided there is
enough space left) and can work with it and submit it independently. This
applies to NMI context as well, except that due to using a spinlock during
reservation, in NMI context, bpf_ringbuf_reserve() might fail to get a lock,
in which case reservation will fail even if ring buffer is not full.
The ring buffer itself internally is implemented as a power-of-2 sized
circular buffer, with two logical and ever-increasing counters (which might
wrap around on 32-bit architectures, that's not a problem):
- consumer counter shows up to which logical position consumer consumed the
data;
- producer counter denotes amount of data reserved by all producers.
Each time a record is reserved, producer that "owns" the record will
successfully advance producer counter. At that point, data is still not yet
ready to be consumed, though. Each record has 8 byte header, which contains
the length of reserved record, as well as two extra bits: busy bit to denote
that record is still being worked on, and discard bit, which might be set at
commit time if record is discarded. In the latter case, consumer is supposed
to skip the record and move on to the next one. Record header also encodes
record's relative offset from the beginning of ring buffer data area (in
pages). This allows bpf_ringbuf_commit()/bpf_ringbuf_discard() to accept only
the pointer to the record itself, without requiring also the pointer to ring
buffer itself. Ring buffer memory location will be restored from record
metadata header. This significantly simplifies verifier, as well as improving
API usability.
Producer counter increments are serialized under spinlock, so there is
a strict ordering between reservations. Commits, on the other hand, are
completely lockless and independent. All records become available to consumer
in the order of reservations, but only after all previous records where
already committed. It is thus possible for slow producers to temporarily hold
off submitted records, that were reserved later.
Reservation/commit/consumer protocol is verified by litmus tests in
Documentation/litmus-test/bpf-rb.
One interesting implementation bit, that significantly simplifies (and thus
speeds up as well) implementation of both producers and consumers is how data
area is mapped twice contiguously back-to-back in the virtual memory. This
allows to not take any special measures for samples that have to wrap around
at the end of the circular buffer data area, because the next page after the
last data page would be first data page again, and thus the sample will still
appear completely contiguous in virtual memory. See comment and a simple ASCII
diagram showing this visually in bpf_ringbuf_area_alloc().
Another feature that distinguishes BPF ringbuf from perf ring buffer is
a self-pacing notifications of new data being availability.
bpf_ringbuf_commit() implementation will send a notification of new record
being available after commit only if consumer has already caught up right up
to the record being committed. If not, consumer still has to catch up and thus
will see new data anyways without needing an extra poll notification.
Benchmarks (see tools/testing/selftests/bpf/benchs/bench_ringbuf.c) show that
this allows to achieve a very high throughput without having to resort to
tricks like "notify only every Nth sample", which are necessary with perf
buffer. For extreme cases, when BPF program wants more manual control of
notifications, commit/discard/output helpers accept BPF_RB_NO_WAKEUP and
BPF_RB_FORCE_WAKEUP flags, which give full control over notifications of data
availability, but require extra caution and diligence in using this API.
Comparison to alternatives
--------------------------
Before considering implementing BPF ring buffer from scratch existing
alternatives in kernel were evaluated, but didn't seem to meet the needs. They
largely fell into few categores:
- per-CPU buffers (perf, ftrace, etc), which don't satisfy two motivations
outlined above (ordering and memory consumption);
- linked list-based implementations; while some were multi-producer designs,
consuming these from user-space would be very complicated and most
probably not performant; memory-mapping contiguous piece of memory is
simpler and more performant for user-space consumers;
- io_uring is SPSC, but also requires fixed-sized elements. Naively turning
SPSC queue into MPSC w/ lock would have subpar performance compared to
locked reserve + lockless commit, as with BPF ring buffer. Fixed sized
elements would be too limiting for BPF programs, given existing BPF
programs heavily rely on variable-sized perf buffer already;
- specialized implementations (like a new printk ring buffer, [0]) with lots
of printk-specific limitations and implications, that didn't seem to fit
well for intended use with BPF programs.
[0] https://lwn.net/Articles/779550/
Change-Id: Idf07d0cc7f8c23be724fbe0cda5bd8254cafe8ae
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200529075424.3139988-2-andriin@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
As stated in 983695fa6765 ("bpf: fix unconnected udp hooks"), the objective
for the existing cgroup connect/sendmsg/recvmsg/bind BPF hooks is to be
transparent to applications. In Cilium we make use of these hooks [0] in
order to enable E-W load balancing for existing Kubernetes service types
for all Cilium managed nodes in the cluster. Those backends can be local
or remote. The main advantage of this approach is that it operates as close
as possible to the socket, and therefore allows to avoid packet-based NAT
given in connect/sendmsg/recvmsg hooks we only need to xlate sock addresses.
This also allows to expose NodePort services on loopback addresses in the
host namespace, for example. As another advantage, this also efficiently
blocks bind requests for applications in the host namespace for exposed
ports. However, one missing item is that we also need to perform reverse
xlation for inet{,6}_getname() hooks such that we can return the service
IP/port tuple back to the application instead of the remote peer address.
The vast majority of applications does not bother about getpeername(), but
in a few occasions we've seen breakage when validating the peer's address
since it returns unexpectedly the backend tuple instead of the service one.
Therefore, this trivial patch allows to customise and adds a getpeername()
as well as getsockname() BPF cgroup hook for both IPv4 and IPv6 in order
to address this situation.
Simple example:
# ./cilium/cilium service list
ID Frontend Service Type Backend
1 1.2.3.4:80 ClusterIP 1 => 10.0.0.10:80
Before; curl's verbose output example, no getpeername() reverse xlation:
# curl --verbose 1.2.3.4
* Rebuilt URL to: 1.2.3.4/
* Trying 1.2.3.4...
* TCP_NODELAY set
* Connected to 1.2.3.4 (10.0.0.10) port 80 (#0)
> GET / HTTP/1.1
> Host: 1.2.3.4
> User-Agent: curl/7.58.0
> Accept: */*
[...]
After; with getpeername() reverse xlation:
# curl --verbose 1.2.3.4
* Rebuilt URL to: 1.2.3.4/
* Trying 1.2.3.4...
* TCP_NODELAY set
* Connected to 1.2.3.4 (1.2.3.4) port 80 (#0)
> GET / HTTP/1.1
> Host: 1.2.3.4
> User-Agent: curl/7.58.0
> Accept: */*
[...]
Originally, I had both under a BPF_CGROUP_INET{4,6}_GETNAME type and exposed
peer to the context similar as in inet{,6}_getname() fashion, but API-wise
this is suboptimal as it always enforces programs having to test for ctx->peer
which can easily be missed, hence BPF_CGROUP_INET{4,6}_GET{PEER,SOCK}NAME split.
Similarly, the checked return code is on tnum_range(1, 1), but if a use case
comes up in future, it can easily be changed to return an error code instead.
Helper and ctx member access is the same as with connect/sendmsg/etc hooks.
[0] https://github.com/cilium/cilium/blob/master/bpf/bpf_sock.c
Change-Id: Ib6118bc0e2bd3125a46628e2b77abb1a952bf3ae
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/61a479d759b2482ae3efb45546490bacd796a220.1589841594.git.daniel@iogearbox.net
With having ability to lookup sockets in cgroup skb programs it becomes
useful to access cgroup id of retrieved sockets so that policies can be
implemented based on origin cgroup of such socket.
For example, a container running in a cgroup can have cgroup skb ingress
program that can lookup peer socket that is sending packets to a process
inside the container and decide whether those packets should be allowed
or denied based on cgroup id of the peer.
More specifically such ingress program can implement intra-host policy
"allow incoming packets only from this same container and not from any
other container on same host" w/o relying on source IP addresses since
quite often it can be the case that containers share same IP address on
the host.
Introduce two new helpers for this use-case: bpf_sk_cgroup_id() and
bpf_sk_ancestor_cgroup_id().
These helpers are similar to existing bpf_skb_{,ancestor_}cgroup_id
helpers with the only difference that sk is used to get cgroup id
instead of skb, and share code with them.
See documentation in UAPI for more details.
Change-Id: I9793a526752304dc25fee3a36adb819c4dbaa491
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/f5884981249ce911f63e9b57ecd5d7d19154ff39.1589486450.git.rdna@fb.com
bpf_sock_addr.user_port supports only 4-byte load and it leads to ugly
code in BPF programs, like:
volatile __u32 user_port = ctx->user_port;
__u16 port = bpf_ntohs(user_port);
Since otherwise clang may optimize the load to be 2-byte and it's
rejected by verifier.
Add support for 1- and 2-byte loads same way as it's supported for other
fields in bpf_sock_addr like user_ip4, msg_src_ip4, etc.
Change-Id: Iecba55c7f54f2fcf1820ba7970f4507a0783aceb
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/c1e983f4c17573032601d0b2b1f9d1274f24bc16.1589420814.git.rdna@fb.com
Two helpers bpf_seq_printf and bpf_seq_write, are added for
writing data to the seq_file buffer.
bpf_seq_printf supports common format string flag/width/type
fields so at least I can get identical results for
netlink and ipv6_route targets.
For bpf_seq_printf and bpf_seq_write, return value -EOVERFLOW
specifically indicates a write failure due to overflow, which
means the object will be repeated in the next bpf invocation
if object collection stays the same. Note that if the object
collection is changed, depending how collection traversal is
done, even if the object still in the collection, it may not
be visited.
For bpf_seq_printf, format %s, %p{i,I}{4,6} needs to
read kernel memory. Reading kernel memory may fail in
the following two cases:
- invalid kernel address, or
- valid kernel address but requiring a major fault
If reading kernel memory failed, the %s string will be
an empty string and %p{i,I}{4,6} will be all 0.
Not returning error to bpf program is consistent with
what bpf_trace_printk() does for now.
bpf_seq_printf may return -EBUSY meaning that internal percpu
buffer for memory copy of strings or other pointees is
not available. Bpf program can return 1 to indicate it
wants the same object to be repeated. Right now, this should not
happen on no-RT kernels since migrate_disable(), which guards
bpf prog call, calls preempt_disable().
Change-Id: If3f9578a12dd29a90e69a6daa23dd67841b7bf9a
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200509175914.2476661-1-yhs@fb.com
