Changes in 4.4.187: (157 commits)
MIPS: ath79: fix ar933x uart parity mode
MIPS: fix build on non-linux hosts
dmaengine: imx-sdma: fix use-after-free on probe error path
ath10k: Do not send probe response template for mesh
ath9k: Check for errors when reading SREV register
ath6kl: add some bounds checking
ath: DFS JP domain W56 fixed pulse type 3 RADAR detection
batman-adv: fix for leaked TVLV handler.
media: dvb: usb: fix use after free in dvb_usb_device_exit
crypto: talitos - fix skcipher failure due to wrong output IV
media: marvell-ccic: fix DMA s/g desc number calculation
media: vpss: fix a potential NULL pointer dereference
net: stmmac: dwmac1000: Clear unused address entries
signal/pid_namespace: Fix reboot_pid_ns to use send_sig not force_sig
af_key: fix leaks in key_pol_get_resp and dump_sp.
xfrm: Fix xfrm sel prefix length validation
media: staging: media: davinci_vpfe: - Fix for memory leak if decoder initialization fails.
net: phy: Check against net_device being NULL
tua6100: Avoid build warnings.
locking/lockdep: Fix merging of hlocks with non-zero references
media: wl128x: Fix some error handling in fm_v4l2_init_video_device()
cpupower : frequency-set -r option misses the last cpu in related cpu list
net: fec: Do not use netdev messages too early
net: axienet: Fix race condition causing TX hang
s390/qdio: handle PENDING state for QEBSM devices
perf test 6: Fix missing kvm module load for s390
gpio: omap: fix lack of irqstatus_raw0 for OMAP4
gpio: omap: ensure irq is enabled before wakeup
regmap: fix bulk writes on paged registers
bpf: silence warning messages in core
rcu: Force inlining of rcu_read_lock()
xfrm: fix sa selector validation
perf evsel: Make perf_evsel__name() accept a NULL argument
vhost_net: disable zerocopy by default
EDAC/sysfs: Fix memory leak when creating a csrow object
media: i2c: fix warning same module names
ntp: Limit TAI-UTC offset
timer_list: Guard procfs specific code
acpi/arm64: ignore 5.1 FADTs that are reported as 5.0
media: coda: fix mpeg2 sequence number handling
media: coda: increment sequence offset for the last returned frame
mt7601u: do not schedule rx_tasklet when the device has been disconnected
x86/build: Add 'set -e' to mkcapflags.sh to delete broken capflags.c
mt7601u: fix possible memory leak when the device is disconnected
ath10k: fix PCIE device wake up failed
rslib: Fix decoding of shortened codes
rslib: Fix handling of of caller provided syndrome
ixgbe: Check DDM existence in transceiver before access
EDAC: Fix global-out-of-bounds write when setting edac_mc_poll_msec
bcache: check c->gc_thread by IS_ERR_OR_NULL in cache_set_flush()
Bluetooth: hci_bcsp: Fix memory leak in rx_skb
Bluetooth: 6lowpan: search for destination address in all peers
Bluetooth: Check state in l2cap_disconnect_rsp
Bluetooth: validate BLE connection interval updates
crypto: ghash - fix unaligned memory access in ghash_setkey()
crypto: arm64/sha1-ce - correct digest for empty data in finup
crypto: arm64/sha2-ce - correct digest for empty data in finup
Input: gtco - bounds check collection indent level
regulator: s2mps11: Fix buck7 and buck8 wrong voltages
tracing/snapshot: Resize spare buffer if size changed
NFSv4: Handle the special Linux file open access mode
lib/scatterlist: Fix mapping iterator when sg->offset is greater than PAGE_SIZE
ALSA: seq: Break too long mutex context in the write loop
media: v4l2: Test type instead of cfg->type in v4l2_ctrl_new_custom()
media: coda: Remove unbalanced and unneeded mutex unlock
KVM: x86/vPMU: refine kvm_pmu err msg when event creation failed
drm/nouveau/i2c: Enable i2c pads & busses during preinit
padata: use smp_mb in padata_reorder to avoid orphaned padata jobs
9p/virtio: Add cleanup path in p9_virtio_init
PCI: Do not poll for PME if the device is in D3cold
take floppy compat ioctls to sodding floppy.c
floppy: fix div-by-zero in setup_format_params
floppy: fix out-of-bounds read in next_valid_format
floppy: fix invalid pointer dereference in drive_name
floppy: fix out-of-bounds read in copy_buffer
coda: pass the host file in vma->vm_file on mmap
gpu: ipu-v3: ipu-ic: Fix saturation bit offset in TPMEM
parisc: Fix kernel panic due invalid values in IAOQ0 or IAOQ1
powerpc/32s: fix suspend/resume when IBATs 4-7 are used
powerpc/watchpoint: Restore NV GPRs while returning from exception
eCryptfs: fix a couple type promotion bugs
intel_th: msu: Fix single mode with disabled IOMMU
Bluetooth: Add SMP workaround Microsoft Surface Precision Mouse bug
usb: Handle USB3 remote wakeup for LPM enabled devices correctly
dm bufio: fix deadlock with loop device
bnx2x: Prevent load reordering in tx completion processing
caif-hsi: fix possible deadlock in cfhsi_exit_module()
ipv4: don't set IPv6 only flags to IPv4 addresses
net: bcmgenet: use promisc for unsupported filters
net: neigh: fix multiple neigh timer scheduling
nfc: fix potential illegal memory access
sky2: Disable MSI on ASUS P6T
netrom: fix a memory leak in nr_rx_frame()
netrom: hold sock when setting skb->destructor
tcp: Reset bytes_acked and bytes_received when disconnecting
bonding: validate ip header before check IPPROTO_IGMP
net: bridge: mcast: fix stale nsrcs pointer in igmp3/mld2 report handling
net: bridge: mcast: fix stale ipv6 hdr pointer when handling v6 query
net: bridge: stp: don't cache eth dest pointer before skb pull
elevator: fix truncation of icq_cache_name
NFSv4: Fix open create exclusive when the server reboots
nfsd: increase DRC cache limit
nfsd: give out fewer session slots as limit approaches
nfsd: fix performance-limiting session calculation
nfsd: Fix overflow causing non-working mounts on 1 TB machines
drm/panel: simple: Fix panel_simple_dsi_probe
usb: core: hub: Disable hub-initiated U1/U2
tty: max310x: Fix invalid baudrate divisors calculator
pinctrl: rockchip: fix leaked of_node references
tty: serial: cpm_uart - fix init when SMC is relocated
memstick: Fix error cleanup path of memstick_init
tty/serial: digicolor: Fix digicolor-usart already registered warning
tty: serial: msm_serial: avoid system lockup condition
drm/virtio: Add memory barriers for capset cache.
phy: renesas: rcar-gen2: Fix memory leak at error paths
usb: gadget: Zero ffs_io_data
powerpc/pci/of: Fix OF flags parsing for 64bit BARs
PCI: sysfs: Ignore lockdep for remove attribute
iio: iio-utils: Fix possible incorrect mask calculation
recordmcount: Fix spurious mcount entries on powerpc
mfd: core: Set fwnode for created devices
mfd: arizona: Fix undefined behavior
um: Silence lockdep complaint about mmap_sem
powerpc/4xx/uic: clear pending interrupt after irq type/pol change
serial: sh-sci: Fix TX DMA buffer flushing and workqueue races
kallsyms: exclude kasan local symbols on s390
perf test mmap-thread-lookup: Initialize variable to suppress memory sanitizer warning
f2fs: avoid out-of-range memory access
mailbox: handle failed named mailbox channel request
powerpc/eeh: Handle hugepages in ioremap space
sh: prevent warnings when using iounmap
mm/kmemleak.c: fix check for softirq context
9p: pass the correct prototype to read_cache_page
mm/mmu_notifier: use hlist_add_head_rcu()
locking/lockdep: Fix lock used or unused stats error
locking/lockdep: Hide unused 'class' variable
usb: wusbcore: fix unbalanced get/put cluster_id
usb: pci-quirks: Correct AMD PLL quirk detection
x86/sysfb_efi: Add quirks for some devices with swapped width and height
x86/speculation/mds: Apply more accurate check on hypervisor platform
hpet: Fix division by zero in hpet_time_div()
ALSA: line6: Fix wrong altsetting for LINE6_PODHD500_1
ALSA: hda - Add a conexant codec entry to let mute led work
powerpc/tm: Fix oops on sigreturn on systems without TM
access: avoid the RCU grace period for the temporary subjective credentials
vmstat: Remove BUG_ON from vmstat_update
mm, vmstat: make quiet_vmstat lighter
ipv6: check sk sk_type and protocol early in ip_mroute_set/getsockopt
tcp: reset sk_send_head in tcp_write_queue_purge
ISDN: hfcsusb: checking idx of ep configuration
media: cpia2_usb: first wake up, then free in disconnect
media: radio-raremono: change devm_k*alloc to k*alloc
Bluetooth: hci_uart: check for missing tty operations
sched/fair: Don't free p->numa_faults with concurrent readers
drivers/pps/pps.c: clear offset flags in PPS_SETPARAMS ioctl
ceph: hold i_ceph_lock when removing caps for freeing inode
Linux 4.4.187
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Conflicts:
fs/ecryptfs/crypto.c
mm/vmstat.c
commit 5515e9a6273b8c02034466bcbd717ac9f53dab99 upstream.
The PPS assert/clear offset corrections are set by the PPS_SETPARAMS
ioctl in the pps_ktime structs, which also contain flags. The flags are
not initialized by applications (using the timepps.h header) and they
are not used by the kernel for anything except returning them back in
the PPS_GETPARAMS ioctl.
Set the flags to zero to make it clear they are unused and avoid leaking
uninitialized data of the PPS_SETPARAMS caller to other applications
that have a read access to the PPS device.
Link: http://lkml.kernel.org/r/20190702092251.24303-1-mlichvar@redhat.com
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Cc: Greg KH <greg@kroah.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GPS driver which makes use of PPS timestamp expects time
with respect to boot time. Existing pps_get_ts function
doesn't return time from the boot so replaced this function
with get_monotonic_boottime function which returns elapsed time
from the boot.
Change-Id: I8f656a1c4ef43f6314d4ab295a177125bcc8195e
CRs-Fixed: 1012438
Signed-off-by: Naresh Munagala <nareshm@codeaurora.org>
commit 368301f2fe4b07e5fb71dba3cc566bc59eb6705f upstream.
With this command sequence:
modprobe plip
modprobe pps_parport
rmmod pps_parport
the partport_pps modules causes this crash:
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: parport_detach+0x1d/0x60 [pps_parport]
Oops: 0000 [#1] SMP
...
Call Trace:
parport_unregister_driver+0x65/0xc0 [parport]
SyS_delete_module+0x187/0x210
The sequence that builds up to this is:
1) plip is loaded and takes the parport device for exclusive use:
plip0: Parallel port at 0x378, using IRQ 7.
2) pps_parport then fails to grab the device:
pps_parport: parallel port PPS client
parport0: cannot grant exclusive access for device pps_parport
pps_parport: couldn't register with parport0
3) rmmod of pps_parport is then killed because it tries to access
pardev->name, but pardev (taken from port->cad) is NULL.
So add a check for NULL in the test there too.
Link: http://lkml.kernel.org/r/20160714115245.12651-1-jslaby@suse.cz
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pps_event_time uses two 'timespec' structures internally, which
suffer from the y2038 problem. The uses of this structure are
fairly self-contained in the pps code, so this replaces them all at
once.
Unfortunately, this includes the sfc ethernet driver aside from the
pps subsystem, so we change that one as well. Both touch the
same data structure, and there probably is no good way to split
the patch into smaller units.
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
There is only one user of the hardpps function in the kernel, so
it makes sense to atomically change it over to using 64-bit
timestamps for y2038 safety. In the hardpps implementation,
we also need to change the pps_normtime structure, which is
similar to struct timespec and also requires a 64-bit
seconds portion.
This introduces two temporary variables in pps_kc_event() to
do the conversion, they will be removed again in the next step,
which seemed preferable to having a larger patch changing it
all at the same time.
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
After the last architecture switched to generic hard irqs the config
options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code
for !CONFIG_GENERIC_HARDIRQS can be removed.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The dev_attrs field of struct class is going away soon, dev_groups
should be used instead. This converts the pps class code to use the
correct field.
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of allocating a struct pps_gpio_platform_data in the DT case,
store the necessary information in struct pps_gpio_device_data itself.
This avoids an additional allocation and the ifdef. It also gets rid of
some indirection.
Also use dev_err instead of pr_err in the changed code.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull VFS updates from Al Viro,
Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).
7kloc removed.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
don't bother with deferred freeing of fdtables
proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
proc: Make the PROC_I() and PDE() macros internal to procfs
proc: Supply a function to remove a proc entry by PDE
take cgroup_open() and cpuset_open() to fs/proc/base.c
ppc: Clean up scanlog
ppc: Clean up rtas_flash driver somewhat
hostap: proc: Use remove_proc_subtree()
drm: proc: Use remove_proc_subtree()
drm: proc: Use minor->index to label things, not PDE->name
drm: Constify drm_proc_list[]
zoran: Don't print proc_dir_entry data in debug
reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
proc: Supply an accessor for getting the data from a PDE's parent
airo: Use remove_proc_subtree()
rtl8192u: Don't need to save device proc dir PDE
rtl8187se: Use a dir under /proc/net/r8180/
proc: Add proc_mkdir_data()
proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
proc: Move PDE_NET() to fs/proc/proc_net.c
...
drivers/pps/kc.c:37:1: sparse: symbol 'pps_kc_hardpps_lock' was not declared. Should it be static?
drivers/pps/kc.c:39:19: sparse: symbol 'pps_kc_hardpps_dev' was not declared. Should it be static?
drivers/pps/kc.c:40:5: sparse: symbol 'pps_kc_hardpps_mode' was not declared. Should it be static?
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make CONFIG_PPS_DEBUG and CONFIG_NTP_PPS be hidden if CONFIG_PPS is not
selected, so that we are not prompted for these configuration options if
CONFIG_PPS is not set.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
devm_kzalloc allocates memory that is released when a driver detaches.
This patch uses devm_kzalloc for data that is allocated in the probe
function of a platform device and is only freed in the remove function.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The PPS (Pulse-Per-Second) line discipline has developed a number of
unhealthy attachments to core tty data and functions, ultimately leading
to its breakage.
The previous patches fixed the crashing. This one reduces coupling further
by eliminating the timestamp parameter from the dcd_change ldisc method.
This reduces header file linkage and makes the extension more generic,
and the timestamp read is delayed only slightly, from just before the
ldisc->ops->dcd_change method call to just after.
Fix attendant build breakage in
drivers/tty/n_tty.c
drivers/tty/tty_buffer.c
drivers/staging/speakup/selection.c
drivers/staging/dgrp/dgrp_*.c
Cc: William Hubbs <w.d.hubbs@gmail.com>
Cc: Chris Brannon <chris@the-brannons.com>
Cc: Kirk Reiser <kirk@braille.uwo.ca>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: George Spelvin <linux@horizon.com>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the cdev from the system (with cdev_del) *before* deallocating it
(in pps_device_destruct, called via kobject_put from device_destroy).
Also prevent deallocating a device with open file handles.
A better long-term fix is probably to remove the cdev from the pps_device
entirely, and instead have all devices reference one global cdev. Then
the deallocation ordering becomes simpler.
But that's more complex and invasive change, so we leave that
for later.
Signed-off-by: George Spelvin <linux@horizon.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that N_TTY uses tty->disc_data for its private data,
'subclass' ldiscs cannot use ->disc_data for their own private data.
(This is a regression is v3.8-rc1)
Use pps_lookup_dev to associate the tty with the pps source instead.
This fixes a crashing regression in 3.8-rc1.
Signed-off-by: George Spelvin <linux@horizon.com>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PPS serial line discipline wants to attach a PPS device to a tty
without changing the tty code to add a struct pps_device * pointer.
Since the number of PPS devices in a typical system is generally very low
(n=1 is by far the most common), it's practical to search the entire list
of allocated pps devices. (We capture the timestamp before the lookup,
so the timing isn't affected.)
It is a bit ugly that this function, which is part of the in-kernel
PPS API, has to be in pps.c as opposed to kapi,c, but that's not
something that affects users.
Signed-off-by: George Spelvin <linux@horizon.com>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The option allows you to remove TTY and compile without errors. This
saves space on systems that won't support TTY interfaces anyway.
bloat-o-meter output is below.
The bulk of this patch consists of Kconfig changes adding "depends on
TTY" to various serial devices and similar drivers that require the TTY
layer. Ideally, these dependencies would occur on a common intermediate
symbol such as SERIO, but most drivers "select SERIO" rather than
"depends on SERIO", and "select" does not respect dependencies.
bloat-o-meter output comparing our previous minimal to new minimal by
removing TTY. The list is filtered to not show removed entries with awk
'$3 != "-"' as the list was very long.
add/remove: 0/226 grow/shrink: 2/14 up/down: 6/-35356 (-35350)
function old new delta
chr_dev_init 166 170 +4
allow_signal 80 82 +2
static.__warned 143 142 -1
disallow_signal 63 62 -1
__set_special_pids 95 94 -1
unregister_console 126 121 -5
start_kernel 546 541 -5
register_console 593 588 -5
copy_from_user 45 40 -5
sys_setsid 128 120 -8
sys_vhangup 32 19 -13
do_exit 1543 1526 -17
bitmap_zero 60 40 -20
arch_local_irq_save 137 117 -20
release_task 674 652 -22
static.spin_unlock_irqrestore 308 260 -48
Signed-off-by: Joe Millenbach <jmillenbach@gmail.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CONFIG_HOTPLUG is going away as an option. As a result, the __dev*
markings need to be removed.
This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.
Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.
Cc: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These are now established subsystems, and we want drivers to be able
to select PPS and PTP_1588_CLOCK without depending on EXPERIMENTAL.
Further, the use of EXPERIMENTAL is now deprecated in general.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To avoid name conflicts:
drivers/video/riva/fbdev.c:281:9: sparse: preprocessor token MAX_LEVEL redefined
While at it, also make the other names more consistent and add
parentheses.
[akpm@linux-foundation.org: repair fallout]
[sfr@canb.auug.org.au: IB/mlx4: fix for MAX_ID_MASK to MAX_IDR_MASK name change]
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: walter harms <wharms@bfs.de>
Cc: Glauber Costa <glommer@parallels.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This client driver allows you to use a GPIO pin as a source for PPS
signals. Platform data [1] are used to specify the GPIO pin number,
label, assert event edge type, and whether clear events are captured.
This driver is based on the work by Ricardo Martins who submitted an
initial implementation [2] of a PPS IRQ client driver to the linuxpps
mailing-list on Dec 3 2010.
[1] include/linux/pps-gpio.h
[2] http://ml.enneenne.com/pipermail/linuxpps/2010-December/004155.html
[akpm@linux-foundation.org: remove unneeded cast of void*]
Signed-off-by: James Nuss <jamesnuss@nanometrics.ca>
Cc: Ricardo Martins <rasm@fe.up.pt>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Ricardo Martins <rasm@fe.up.pt>
Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: Igor Plyatov <plyatov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A default echo function has been provided so it is no longer an error when
you specify PPS_ECHOASSERT or PPS_ECHOCLEAR without an explicit echo
function. This allows some code re-use and also makes it easier to write
client drivers since the default echo function does not normally need to
change.
Signed-off-by: James Nuss <jamesnuss@nanometrics.ca>
Reviewed-by: Ben Gardiner <bengardiner@nanometrics.ca>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Cc: Ricardo Martins <rasm@fe.up.pt>
Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: Igor Plyatov <plyatov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This driver causes hard lockups, when the active clock soure is jiffies.
The reason is that it loops with interrupts disabled waiting for a
timestamp to be reached by polling getnstimeofday(). Though with a
jiffies clocksource, when that code runs on the same CPU which is
responsible for updating jiffies, then we loop in circles for ever
simply because the timer interrupt cannot update jiffies. So both UP
and SMP can be affected.
There is no easy fix for that problem so make it depend on BROKEN for
now.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: Rodolfo Giometti <giometti@linux.it>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Both pps_parport and pps_gen_parport are written in a way that they
can't share a port with any other driver. This can result in locking up
the process that loads modules or even the whole kernel if the modules
are compiled in. Use PARPORT_FLAG_EXCL to indicate this.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add PPS signal generator which utilizes STROBE pin of a parallel port to
send PPS signals. It uses parport abstraction layer and hrtimers to
precisely control the signal.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add PPS signal generator which utilizes STROBE pin of a parallel port to
send PPS signals. It uses parport abstraction layer and hrtimers to
precisely control the signal.
[akpm@linux-foundation.org: fix build]
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add parallel port PPS client. It uses a standard method for capturing
timestamps for assert edge transitions: getting a timestamp soon after an
interrupt has happened.
This is not a very precise source of time information due to interrupt
handling delays. However, timestamps for clear edge transitions are much
more precise because the interrupt handler continuously polls hardware
port until the transition is done.
Hardware port operations require only about 1us so the maximum error
should not exceed this value. This was my primary goal when developing
this client.
Clear edge capture could be disabled using clear_wait parameter.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit adds hardpps() implementation based upon the original one from
the NTPv4 reference kernel code from David Mills. However, it is highly
optimized towards very fast syncronization and maximum stickness to PPS
signal. The typical error is less then a microsecond.
To make it sync faster I had to throw away exponential phase filter so
that the full phase offset is corrected immediately. Then I also had to
throw away median phase filter because it gives a bigger error itself if
used without exponential filter.
Maybe we will find an appropriate filtering scheme in the future but it's
not necessary if the signal quality is ok.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove the code that gatheres timestamp in pps_tty_dcd_change() in case
passed ts parameter is NULL because it never happens in the current code.
Fix comments as well.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This way less overhead is involved when running production kernel. If you
want to debug a pps client module please define DEBUG to enable the
checks.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now pps_idr_lock is never used in interrupt context so we can replace
spin_lock_irq/spin_unlock_irq with plain spin_lock/spin_unlock. But
there is also a potential race condition when someone can steal an id
which was allocated by idr_pre_get before it is used. So convert spin
lock to mutex and protect the whole id generation process.
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
