Changes in 4.4.211: (77 commits)
hidraw: Return EPOLLOUT from hidraw_poll
HID: hidraw: Fix returning EPOLLOUT from hidraw_poll
HID: hidraw, uhid: Always report EPOLLOUT
rsi: add fix for crash during assertions
cfg80211/mac80211: make ieee80211_send_layer2_update a public function
mac80211: Do not send Layer 2 Update frame before authorization
media: usb:zr364xx:Fix KASAN:null-ptr-deref Read in zr364xx_vidioc_querycap
p54usb: Fix race between disconnect and firmware loading
ALSA: line6: Fix write on zero-sized buffer
ALSA: line6: Fix memory leak at line6_init_pcm() error path
mm/page_alloc.c: calculate 'available' memory in a separate function
xen: let alloc_xenballooned_pages() fail if not enough memory free
wimax: i2400: fix memory leak
wimax: i2400: Fix memory leak in i2400m_op_rfkill_sw_toggle
ext4: fix use-after-free race with debug_want_extra_isize
ext4: add more paranoia checking in ext4_expand_extra_isize handling
dccp: Fix memleak in __feat_register_sp
rtc: mt6397: fix alarm register overwrite
iommu: Remove device link to group on failure
gpio: Fix error message on out-of-range GPIO in lookup table
hsr: reset network header when supervision frame is created
cifs: Adjust indentation in smb2_open_file
RDMA/srpt: Report the SCSI residual to the initiator
scsi: enclosure: Fix stale device oops with hot replug
scsi: sd: Clear sdkp->protection_type if disk is reformatted without PI
platform/x86: asus-wmi: Fix keyboard brightness cannot be set to 0
iio: imu: adis16480: assign bias value only if operation succeeded
mei: fix modalias documentation
clk: samsung: exynos5420: Preserve CPU clocks configuration during suspend/resume
compat_ioctl: handle SIOCOUTQNSD
tty: serial: imx: use the sg count from dma_map_sg
tty: serial: pch_uart: correct usage of dma_unmap_sg
media: exynos4-is: Fix recursive locking in isp_video_release()
spi: atmel: fix handling of cs_change set on non-last xfer
rtlwifi: Remove unnecessary NULL check in rtl_regd_init
rtc: msm6242: Fix reading of 10-hour digit
rseq/selftests: Turn off timeout setting
hexagon: work around compiler crash
ocfs2: call journal flush to mark journal as empty after journal recovery when mount
ALSA: seq: Fix racy access for queue timer in proc read
Fix built-in early-load Intel microcode alignment
block: fix an integer overflow in logical block size
USB: serial: simple: Add Motorola Solutions TETRA MTP3xxx and MTP85xx
USB: serial: opticon: fix control-message timeouts
USB: serial: suppress driver bind attributes
USB: serial: ch341: handle unbound port at reset_resume
USB: serial: io_edgeport: add missing active-port sanity check
USB: serial: quatech2: handle unbound ports
scsi: mptfusion: Fix double fetch bug in ioctl
usb: core: hub: Improved device recognition on remote wakeup
x86/efistub: Disable paging at mixed mode entry
mm/page-writeback.c: avoid potential division by zero in wb_min_max_ratio()
net: stmmac: 16KB buffer must be 16 byte aligned
net: stmmac: Enable 16KB buffer size
USB: serial: io_edgeport: use irqsave() in USB's complete callback
USB: serial: io_edgeport: handle unbound ports on URB completion
USB: serial: keyspan: handle unbound ports
scsi: fnic: use kernel's '%pM' format option to print MAC
scsi: fnic: fix invalid stack access
arm64: dts: agilex/stratix10: fix pmu interrupt numbers
netfilter: fix a use-after-free in mtype_destroy()
batman-adv: Fix DAT candidate selection on little endian systems
macvlan: use skb_reset_mac_header() in macvlan_queue_xmit()
r8152: add missing endpoint sanity check
tcp: fix marked lost packets not being retransmitted
net: usb: lan78xx: limit size of local TSO packets
xen/blkfront: Adjust indentation in xlvbd_alloc_gendisk
cw1200: Fix a signedness bug in cw1200_load_firmware()
cfg80211: check for set_wiphy_params
scsi: esas2r: unlock on error in esas2r_nvram_read_direct()
scsi: qla4xxx: fix double free bug
scsi: bnx2i: fix potential use after free
scsi: target: core: Fix a pr_debug() argument
scsi: core: scsi_trace: Use get_unaligned_be*()
perf probe: Fix wrong address verification
regulator: ab8500: Remove SYSCLKREQ from enum ab8505_regulator_id
Linux 4.4.211
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Conflicts:
net/wireless/util.c
Changes in 4.4.207: (163 commits)
x86/apic/32: Avoid bogus LDR warnings
usb: gadget: u_serial: add missing port entry locking
tty: serial: msm_serial: Fix flow control
x86/PCI: Avoid AMD FCH XHCI USB PME# from D0 defect
serial: serial_core: Perform NULL checks for break_ctl ops
serial: ifx6x60: add missed pm_runtime_disable
autofs: fix a leak in autofs_expire_indirect()
NFC: nxp-nci: Fix NULL pointer dereference after I2C communication error
Input: cyttsp4_core - fix use after free bug
ALSA: pcm: Fix stream lock usage in snd_pcm_period_elapsed()
rsxx: add missed destroy_workqueue calls in remove
net: ep93xx_eth: fix mismatch of request_mem_region in remove
serial: core: Allow processing sysrq at port unlock time
iwlwifi: mvm: Send non offchannel traffic via AP sta
ARM: 8813/1: Make aligned 2-byte getuser()/putuser() atomic on ARMv6+
extcon: max8997: Fix lack of path setting in USB device mode
clk: rockchip: fix rk3188 sclk_smc gate data
clk: rockchip: fix rk3188 sclk_mac_lbtest parameter ordering
dlm: fix missing idr_destroy for recover_idr
MIPS: SiByte: Enable ZONE_DMA32 for LittleSur
scsi: zfcp: drop default switch case which might paper over missing case
pinctrl: qcom: ssbi-gpio: fix gpio-hog related boot issues
Staging: iio: adt7316: Fix i2c data reading, set the data field
regulator: Fix return value of _set_load() stub
MIPS: OCTEON: octeon-platform: fix typing
math-emu/soft-fp.h: (_FP_ROUND_ZERO) cast 0 to void to fix warning
rtc: max8997: Fix the returned value in case of error in 'max8997_rtc_read_alarm()'
rtc: dt-binding: abx80x: fix resistance scale
ARM: dts: exynos: Use Samsung SoC specific compatible for DWC2 module
dmaengine: coh901318: Fix a double-lock bug
dmaengine: coh901318: Remove unused variable
ACPI: fix acpi_find_child_device() invocation in acpi_preset_companion()
dma-mapping: fix return type of dma_set_max_seg_size()
altera-stapl: check for a null key before strcasecmp'ing it
serial: imx: fix error handling in console_setup
i2c: imx: don't print error message on probe defer
dlm: NULL check before kmem_cache_destroy is not needed
nfsd: fix a warning in __cld_pipe_upcall()
ARM: OMAP1/2: fix SoC name printing
net/x25: fix called/calling length calculation in x25_parse_address_block
net/x25: fix null_x25_address handling
ARM: dts: mmp2: fix the gpio interrupt cell number
tcp: fix off-by-one bug on aborting window-probing socket
modpost: skip ELF local symbols during section mismatch check
kbuild: fix single target build for external module
ARM: dts: pxa: clean up USB controller nodes
dlm: fix invalid cluster name warning
powerpc/math-emu: Update macros from GCC
MIPS: OCTEON: cvmx_pko_mem_debug8: use oldest forward compatible definition
nfsd: Return EPERM, not EACCES, in some SETATTR cases
mlx4: Use snprintf instead of complicated strcpy
ARM: dts: sunxi: Fix PMU compatible strings
sched/fair: Scale bandwidth quota and period without losing quota/period ratio precision
fuse: verify nlink
fuse: verify attributes
ALSA: pcm: oss: Avoid potential buffer overflows
Input: goodix - add upside-down quirk for Teclast X89 tablet
CIFS: Fix NULL-pointer dereference in smb2_push_mandatory_locks
CIFS: Fix SMB2 oplock break processing
tty: vt: keyboard: reject invalid keycodes
can: slcan: Fix use-after-free Read in slcan_open
jbd2: Fix possible overflow in jbd2_log_space_left()
drm/i810: Prevent underflow in ioctl
KVM: x86: do not modify masked bits of shared MSRs
KVM: x86: fix presentation of TSX feature in ARCH_CAPABILITIES
crypto: crypto4xx - fix double-free in crypto4xx_destroy_sdr
crypto: user - fix memory leak in crypto_report
spi: atmel: Fix CS high support
RDMA/qib: Validate ->show()/store() callbacks before calling them
thermal: Fix deadlock in thermal thermal_zone_device_check
KVM: x86: fix out-of-bounds write in KVM_GET_EMULATED_CPUID (CVE-2019-19332)
appletalk: Fix potential NULL pointer dereference in unregister_snap_client
appletalk: Set error code if register_snap_client failed
ALSA: hda - Fix pending unsol events at shutdown
sched/core: Allow putting thread_info into task_struct
sched/core: Add try_get_task_stack() and put_task_stack()
sched/core, x86: Make struct thread_info arch specific again
fs/proc: Stop reporting eip and esp in /proc/PID/stat
fs/proc: Report eip/esp in /prod/PID/stat for coredumping
proc: fix coredump vs read /proc/*/stat race
fs/proc/array.c: allow reporting eip/esp for all coredumping threads
usb: gadget: configfs: Fix missing spin_lock_init()
usb: Allow USB device to be warm reset in suspended state
staging: rtl8188eu: fix interface sanity check
staging: rtl8712: fix interface sanity check
staging: gigaset: fix general protection fault on probe
staging: gigaset: fix illegal free on probe errors
staging: gigaset: add endpoint-type sanity check
xhci: Increase STS_HALT timeout in xhci_suspend()
iio: humidity: hdc100x: fix IIO_HUMIDITYRELATIVE channel reporting
USB: atm: ueagle-atm: add missing endpoint check
USB: idmouse: fix interface sanity checks
USB: serial: io_edgeport: fix epic endpoint lookup
USB: adutux: fix interface sanity check
usb: core: urb: fix URB structure initialization function
usb: mon: Fix a deadlock in usbmon between mmap and read
mtd: spear_smi: Fix Write Burst mode
virtio-balloon: fix managed page counts when migrating pages between zones
btrfs: check page->mapping when loading free space cache
btrfs: Remove btrfs_bio::flags member
rtlwifi: rtl8192de: Fix missing code to retrieve RX buffer address
rtlwifi: rtl8192de: Fix missing callback that tests for hw release of buffer
rtlwifi: rtl8192de: Fix missing enable interrupt flag
lib: raid6: fix awk build warnings
workqueue: Fix spurious sanity check failures in destroy_workqueue()
workqueue: Fix pwq ref leak in rescuer_thread()
ASoC: Jack: Fix NULL pointer dereference in snd_soc_jack_report
blk-mq: avoid sysfs buffer overflow with too many CPU cores
cgroup: pids: use atomic64_t for pids->limit
ar5523: check NULL before memcpy() in ar5523_cmd()
media: bdisp: fix memleak on release
media: radio: wl1273: fix interrupt masking on release
cpuidle: Do not unset the driver if it is there already
ACPI: OSL: only free map once in osl.c
ACPI: bus: Fix NULL pointer check in acpi_bus_get_private_data()
ACPI: PM: Avoid attaching ACPI PM domain to certain devices
pinctrl: samsung: Fix device node refcount leaks in S3C24xx wakeup controller init
pinctrl: samsung: Fix device node refcount leaks in init code
powerpc: Allow 64bit VDSO __kernel_sync_dicache to work across ranges >4GB
video/hdmi: Fix AVI bar unpack
quota: Check that quota is not dirty before release
quota: fix livelock in dquot_writeback_dquots
scsi: zfcp: trace channel log even for FCP command responses
usb: xhci: only set D3hot for pci device
xhci: Fix memory leak in xhci_add_in_port()
xhci: make sure interrupts are restored to correct state
iio: adis16480: Add debugfs_reg_access entry
Btrfs: fix negative subv_writers counter and data space leak after buffered write
scsi: lpfc: Cap NPIV vports to 256
e100: Fix passing zero to 'PTR_ERR' warning in e100_load_ucode_wait
x86/MCE/AMD: Turn off MC4_MISC thresholding on all family 0x15 models
ARM: dts: omap3-tao3530: Fix incorrect MMC card detection GPIO polarity
pinctrl: samsung: Fix device node refcount leaks in S3C64xx wakeup controller init
scsi: qla2xxx: Fix DMA unmap leak
scsi: qla2xxx: Fix qla24xx_process_bidir_cmd()
scsi: qla2xxx: Always check the qla2x00_wait_for_hba_online() return value
powerpc: Fix vDSO clock_getres()
mm/shmem.c: cast the type of unmap_start to u64
blk-mq: make sure that line break can be printed
workqueue: Fix missing kfree(rescuer) in destroy_workqueue()
sunrpc: fix crash when cache_head become valid before update
kernel/module.c: wakeup processes in module_wq on module unload
net: bridge: deny dev_set_mac_address() when unregistering
tcp: md5: fix potential overestimation of TCP option space
tipc: fix ordering of tipc module init and exit routine
inet: protect against too small mtu values.
tcp: fix rejected syncookies due to stale timestamps
tcp: tighten acceptance of ACKs not matching a child socket
tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE()
net: ethernet: ti: cpsw: fix extra rx interrupt
PCI: Fix Intel ACS quirk UPDCR register address
PCI/MSI: Fix incorrect MSI-X masking on resume
xtensa: fix TLB sanity checker
CIFS: Respect O_SYNC and O_DIRECT flags during reconnect
ARM: dts: s3c64xx: Fix init order of clock providers
ARM: tegra: Fix FLOW_CTLR_HALT register clobbering by tegra_resume()
vfio/pci: call irq_bypass_unregister_producer() before freeing irq
dm btree: increase rebalance threshold in __rebalance2()
drm/radeon: fix r1xx/r2xx register checker for POT textures
xhci: fix USB3 device initiated resume race with roothub autosuspend
net: stmmac: use correct DMA buffer size in the RX descriptor
net: stmmac: don't stop NAPI processing when dropping a packet
Linux 4.4.207
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Conflicts:
include/linux/thread_info.h
[ Upstream commit f1abf67217de91f5cd3c757ae857632ca565099a ]
The stub implementation of _set_load() returns a mode value which is
within the bounds of valid return codes for success (the documentation
just says that failures are negative error codes) but not sensible or
what the actual implementation does. Fix it to just return 0.
Reported-by: Cheng-Yi Chiang <cychiang@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Some drivers (e.g. OLEDB) would need to know about LAB_VREG_OK
status from the LABIBB module. Hence, add support for the
notifier callback so that required drivers can be notified about
LAB_VREG_OK status.
Change-Id: Ib60c94c7557ee6ffb7595dee5bd268bb76faaf6e
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
Correct warnings flagged by checkpatch. In particular, modify
the following:
- Use octal file permissions instead of symbolic.
- Add 'const' to type of struct of_device_id variables.
- Remove unnecessary out-of-memory error messages.
- Change variables of type 'unsigned' to 'unsigned int'.
- Restructure conditionals to avoid else after return/break.
- Remove 'return' from the end of void functions.
- Join strings that are wrapped across two lines.
- Remove ';' from the end of a macro definition.
- Update the REGULATOR_QPNP Kconfig entry and the device tree
documentation to use the name: 'Qualcomm Technologies, Inc.'
Change-Id: I9f2cde58929ae57667366bb886e65154d36dfd3d
Signed-off-by: David Collins <collinsd@codeaurora.org>
An LDO300 regulator is used by the GPU rail on msmfalcon. This LDO
is CPR managed and uses a different configuration/control scheme
compared to Kryo LDO. Add support for this LDO in the CPR3 framework.
CRs-Fixed: 1068294
Change-Id: Ia45152fe211f2ece1028c5cb978beebda86faba3
Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org>
This is a snapshot of the Documentation and header file for
the stub regulator driver as of msm-3.18 kernel commit:
2642c0adc79c06c0f3225da0177e910a1cea8cb5 ("Merge "ARM: dts:
msm: Add support for truly 720p command mode panel on msmgold"")
Signed-off-by: Devesh Jhunjhunwala <deveshj@codeaurora.org>
Ensure that regulator_put() is called on the core debugfs
consumer pointer for a given regulator when the debugfs interface
is no longer needed. This includes inside of the
regulator_unregister() function as well as in the error return
path of rdev_init_debugfs().
Change-Id: I10563ae1716f31bdc5840d22633fdbfe278330f1
Signed-off-by: David Collins <collinsd@codeaurora.org>
Introduce a regulator_list_corner_voltage function for consumers
that need to know the maximum absolute voltage that may be
physically configured when a regulator is operating at a given
voltage corner.
Change-Id: Ide7a0b502796774fcad01f5cb5679f0938c72f96
Signed-off-by: David Collins <collinsd@codeaurora.org>
[adharmap: fixed merge conflicts]
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Conflicts:
include/linux/regulator/consumer.h
Since the regulator debugfs consumer does not call
regulator_allow_bypass() on its regulator handles, regulators
will not be placed on bypass mode even if all other consumers
request for this. Fix this by introducing an open offset count
that can be used to selectively disregard the debugfs consumer.
Also, introduce a debugfs file to allow or disallow bypass
mode on each regulator by leveraging on the new open offset count.
Change-Id: If12534dac5e6b1c82acac9b5250137b4f816b922
Signed-off-by: Osvaldo Banuelos <osvaldob@codeaurora.org>
Add a call to regulator_proxy_consumer_register() at the end of
regulator_register() and a call to
regulator_proxy_consumer_unregister() at the beginning of
regulator_unregister(). These calls ensure that proxy consumer
features may be used by any type of regulator regardless of the
driver supporting it.
Change-Id: Ia70da1df47042fa673c42f389136557f868d19a3
Signed-off-by: David Collins <collinsd@codeaurora.org>
[abhimany: resolve trivial merge conflicts]
Signed-off-by: Abhimanyu Kapur <abhimany@codeaurora.org>
[adharmap: resolve trivial merge conflicts]
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Add a convenience API to set the voltage on multiple consumers
stored in a struct regulator_bulk_data[] in one API call.
Change-Id: Iaeb5ba8c357a66f1401fb1e142bb03904e8e9c7c
Signed-off-by: Justin Paupore <jpaupore@codeaurora.org>
Add a notifier event which is triggered when a regulator is
enabled. This can be used by a driver which must configure the
hardware state whenever a given supply is enabled even if some
other consumer was responsible for enabling the supply.
Change-Id: Ic8363308b64953451dd01756e1bfdc2a64527096
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Abhimanyu Kapur <abhimany@codeaurora.org>
[osvaldob: resolve trivial merge conflicts]
Signed-off-by: Osvaldo Banuelos <osvaldob@codeaurora.org>
[adharmap: 0x100 was taken by PRE_VOLTAGE_CHANGE use 0x1000 for ENABLE]
This snapshot is taken as of msm-3.18 commit
9da4ddc (Merge "clk: msm: clock-gcc: Associate gfx rail
voting with gfx3d branch")
Change-Id: Idd2f467f1f1863a156d1757589dfe78158f0e43f
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Many voltage Regulators need a input voltage that is higher than the
output voltage. Allow to specify a minimum dropout voltage which will
be used later to find the best input voltage for regulators.
[Changed uv to uV for consistency and legibility -- broonie]
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Voltage tolerance isn't necessarily same on both sides of the target
voltage and regulator_set_voltage_tol() wouldn't be suitable in such
cases.
Add another routine regulator_set_voltage_triplet(), which accepts
target, min and max voltages as arguments.
This first tries to set the voltage between the target voltage and the
upper limit, then fall back on the full range. The idea behind this is
to set regulator's voltage as close to the target voltage, as possible.
Based on regulator_set_voltage_tol().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Some regulators can automatically shut down when they detect an
over current event. Add an op (set_over_current_protection) and a
DT property + constraint to support this capability.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add regulator support for mt6311.
It has 2 regulaotrs - Buck and LDO, provide the related buck/ldo voltage
data to the driver, and creates the regulator_desc table. Supported
operations for Buck are enabled/disabled and voltage change, only
enabled/disabled for LDO.
Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes a build break when CONFIG_REGULATOR is not selected.
e.g, on linux-next - 07102015:
drivers/clk/tegra/clk-dfll.c: In function ‘find_lut_index_for_rate’:
drivers/clk/tegra/clk-dfll.c:691:3: error: implicit declaration of function ‘regulator_list_voltage’ [-Werror=implicit-function-declaration]
if (regulator_list_voltage(td->vdd_reg, td->i2c_lut[i]) == uv)
^
CC drivers/clocksource/mmio.o
CC fs/proc/softirqs.o
cc1: some warnings being treated as errors
make[3]: *** [drivers/clk/tegra/clk-dfll.o] Error 1
make[2]: *** [drivers/clk/tegra] Error 2
make[1]: *** [drivers/clk] Error 2
make[1]: *** Waiting for unfinished jobs....
This should be pushed to 4.2 as we have the issue in 4.2-rc1, just that
nobody uses it without the REGULATOR(yet).
Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The docbook for these members is missing. Add them.
Warning(include/linux/regulator/machine.h:147): No description
found for parameter 'soft_start'
Warning(include/linux/regulator/driver.h:197): No description
found for parameter 'set_soft_start'
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Some regulators can limit their input current (typically annotated
as ilim). Add an op (set_input_current_limit) and a DT property +
constraint to support this.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Some regulators support a "soft start" feature where the voltage
ramps up slowly when the regulator is enabled. Add an op
(set_soft_start) and a DT property + constraint to support this.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Some regulators need to be configured to pull down a resistor
when the regulator is disabled. Add an op (set_pull_down) and a
DT property + constraint to support this.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Some regulators have a fixed load that isn't captured by
consumers that the kernel knows about. Add a constraint to
support this.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
MAX8973 supports the voltage output enable/disable through its EN
pin. This EN pin can be connected through GPIO from host processor.
Add support to provide GPIO number from platform/DT and if it is
valid GPIO then enable external control default.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of resolving regulator supplies during registration move this to
the time of a consumer retrieving a handle. The benefit is that it's
possible for one driver to register regulators with internal
dependencies out of order.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename the regulator_set_optimum_mode() function regulator_set_load() to
better represent what's going on.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds act8600 support to the act8865 driver.
VBUS and USB charger supported by this chip can be added later
Tested on MIPS Creator CI20
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add devm_regulator_register_notifier, this adds the resource against the
device for the consumer supply we are registering the notifier for. There
seem to be few use-cases where this wouldn't be the users intention and
this ensures the notifiers will always be removed at the correct time.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Expose the requested load directly to the regulator implementation for
hardware that does not support the normal enum based set_mode().
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add missing stubs for regulator_suspend_prepare() and
regulator_suspend_finish() to fix exynos_defconfig build without
REGULATOR:
arch/arm/mach-exynos/built-in.o: In function `exynos_suspend_finish':
arch/arm/mach-exynos/suspend.c:537: undefined reference to `regulator_suspend_finish'
arch/arm/mach-exynos/built-in.o: In function `exynos_suspend_prepare':
arch/arm/mach-exynos/suspend.c:520: undefined reference to `regulator_suspend_prepare'
make: *** [vmlinux] Error 1
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reported-by: Joerg Roedel <joro@8bytes.org>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
