840671ca47
# By Sergey Shtylyov (9) and others # Via Greg Kroah-Hartman * common/android-4.4-p: Linux 4.4.288 libata: Add ATA_HORKAGE_NO_NCQ_ON_ATI for Samsung 860 and 870 SSD. usb: testusb: Fix for showing the connection speed scsi: sd: Free scsi_disk device via put_device() ext2: fix sleeping in atomic bugs on error sparc64: fix pci_iounmap() when CONFIG_PCI is not set xen-netback: correct success/error reporting for the SKB-with-fraglist case af_unix: fix races in sk_peer_pid and sk_peer_cred accesses Linux 4.4.287 Revert "arm64: Mark __stack_chk_guard as __ro_after_init" Linux 4.4.286 cred: allow get_cred() and put_cred() to be given NULL. HID: usbhid: free raw_report buffers in usbhid_stop netfilter: ipset: Fix oversized kvmalloc() calls HID: betop: fix slab-out-of-bounds Write in betop_probe arm64: Extend workaround for erratum 1024718 to all versions of Cortex-A55 EDAC/synopsys: Fix wrong value type assignment for edac_mode ext4: fix potential infinite loop in ext4_dx_readdir() ipack: ipoctal: fix module reference leak ipack: ipoctal: fix missing allocation-failure check ipack: ipoctal: fix tty-registration error handling ipack: ipoctal: fix tty registration race ipack: ipoctal: fix stack information leak e100: fix buffer overrun in e100_get_regs e100: fix length calculation in e100_get_regs_len ipvs: check that ip_vs_conn_tab_bits is between 8 and 20 mac80211: fix use-after-free in CCMP/GCMP RX tty: Fix out-of-bound vmalloc access in imageblit qnx4: work around gcc false positive warning bug spi: Fix tegra20 build with CONFIG_PM=n net: 6pack: Fix tx timeout and slot time alpha: Declare virt_to_phys and virt_to_bus parameter as pointer to volatile arm64: Mark __stack_chk_guard as __ro_after_init parisc: Use absolute_pointer() to define PAGE0 qnx4: avoid stringop-overread errors sparc: avoid stringop-overread errors net: i825xx: Use absolute_pointer for memcpy from fixed memory location compiler.h: Introduce absolute_pointer macro m68k: Double cast io functions to unsigned long blktrace: Fix uaf in blk_trace access after removing by sysfs scsi: iscsi: Adjust iface sysfs attr detection net/mlx4_en: Don't allow aRFS for encapsulated packets net: hso: fix muxed tty registration USB: serial: option: add device id for Foxconn T99W265 USB: serial: option: remove duplicate USB device ID USB: serial: option: add Telit LN920 compositions USB: serial: mos7840: remove duplicated 0xac24 device ID USB: serial: cp210x: add ID for GW Instek GDM-834x Digital Multimeter xen/x86: fix PV trap handling on secondary processors cifs: fix incorrect check for null pointer in header_assemble usb: musb: tusb6010: uninitialized data in tusb_fifo_write_unaligned() usb: gadget: r8a66597: fix a loop in set_feature() Linux 4.4.285 sctp: validate from_addr_param return drm/nouveau/nvkm: Replace -ENOSYS with -ENODEV blk-throttle: fix UAF by deleteing timer in blk_throtl_exit() nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group nilfs2: fix NULL pointer in nilfs_##name##_attr_release nilfs2: fix memory leak in nilfs_sysfs_create_device_group ceph: lockdep annotations for try_nonblocking_invalidate dmaengine: ioat: depends on !UML parisc: Move pci_dev_is_behind_card_dino to where it is used dmaengine: acpi: Avoid comparison GSI with Linux vIRQ dmaengine: acpi-dma: check for 64-bit MMIO address profiling: fix shift-out-of-bounds bugs prctl: allow to setup brk for et_dyn executables 9p/trans_virtio: Remove sysfs file on probe failure thermal/drivers/exynos: Fix an error code in exynos_tmu_probe() sctp: add param size validation for SCTP_PARAM_SET_PRIMARY sctp: validate chunk size in __rcv_asconf_lookup PM / wakeirq: Fix unbalanced IRQ enable for wakeirq s390/bpf: Fix optimizing out zero-extensions Linux 4.4.284 s390/bpf: Fix 64-bit subtraction of the -0x80000000 constant net: renesas: sh_eth: Fix freeing wrong tx descriptor qlcnic: Remove redundant unlock in qlcnic_pinit_from_rom ARC: export clear_user_page() for modules mtd: rawnand: cafe: Fix a resource leak in the error handling path of 'cafe_nand_probe()' PCI: Sync __pci_register_driver() stub for CONFIG_PCI=n ethtool: Fix an error code in cxgb2.c dt-bindings: mtd: gpmc: Fix the ECC bytes vs. OOB bytes equation x86/mm: Fix kern_addr_valid() to cope with existing but not present entries net/af_unix: fix a data-race in unix_dgram_poll tipc: increase timeout in tipc_sk_enqueue() r6040: Restore MDIO clock frequency after MAC reset net/l2tp: Fix reference count leak in l2tp_udp_recv_core dccp: don't duplicate ccid when cloning dccp sock ptp: dp83640: don't define PAGE0 net-caif: avoid user-triggerable WARN_ON(1) bnx2x: Fix enabling network interfaces without VFs platform/chrome: cros_ec_proto: Send command again when timeout occurs parisc: fix crash with signals and alloca net: fix NULL pointer reference in cipso_v4_doi_free ath9k: fix OOB read ar9300_eeprom_restore_internal parport: remove non-zero check on count Revert "USB: xhci: fix U1/U2 handling for hardware with XHCI_INTEL_HOST quirk set" cifs: fix wrong release in sess_alloc_buffer() failed path mmc: rtsx_pci: Fix long reads when clock is prescaled gfs2: Don't call dlm after protocol is unmounted rpc: fix gss_svc_init cleanup on failure ARM: tegra: tamonten: Fix UART pad setting gpu: drm: amd: amdgpu: amdgpu_i2c: fix possible uninitialized-variable access in amdgpu_i2c_router_select_ddc_port() Bluetooth: skip invalid hci_sync_conn_complete_evt serial: 8250_pci: make setup_port() parameters explicitly unsigned hvsi: don't panic on tty_register_driver failure xtensa: ISS: don't panic in rs_init serial: 8250: Define RX trigger levels for OxSemi 950 devices s390/jump_label: print real address in a case of a jump label bug ipv4: ip_output.c: Fix out-of-bounds warning in ip_copy_addrs() video: fbdev: riva: Error out if 'pixclock' equals zero video: fbdev: kyro: Error out if 'pixclock' equals zero video: fbdev: asiliantfb: Error out if 'pixclock' equals zero bpf/tests: Do not PASS tests without actually testing the result bpf/tests: Fix copy-and-paste error in double word test tty: serial: jsm: hold port lock when reporting modem line changes usb: gadget: u_ether: fix a potential null pointer dereference usb: host: fotg210: fix the actual_length of an iso packet Smack: Fix wrong semantics in smk_access_entry() netlink: Deal with ESRCH error in nlmsg_notify() video: fbdev: kyro: fix a DoS bug by restricting user input iio: dac: ad5624r: Fix incorrect handling of an optional regulator. PCI: Use pci_update_current_state() in pci_enable_device_flags() crypto: mxs-dcp - Use sg_mapping_iter to copy data pinctrl: single: Fix error return code in pcs_parse_bits_in_pinctrl_entry() openrisc: don't printk() unconditionally PCI: Return ~0 data on pciconfig_read() CAP_SYS_ADMIN failure PCI: Restrict ASMedia ASM1062 SATA Max Payload Size Supported ARM: 9105/1: atags_to_fdt: don't warn about stack size libata: add ATA_HORKAGE_NO_NCQ_TRIM for Samsung 860 and 870 SSDs media: rc-loopback: return number of emitters rather than error media: uvc: don't do DMA on stack VMCI: fix NULL pointer dereference when unmapping queue pair power: supply: max17042: handle fails of reading status register xen: fix setting of max_pfn in shared_info PCI/MSI: Skip masking MSI-X on Xen PV rtc: tps65910: Correct driver module alias fbmem: don't allow too huge resolutions clk: kirkwood: Fix a clocking boot regression KVM: x86: Update vCPU's hv_clock before back to guest when tsc_offset is adjusted tty: Fix data race between tiocsti() and flush_to_ldisc() ipv4: make exception cache less predictible bcma: Fix memory leak for internally-handled cores ath6kl: wmi: fix an error code in ath6kl_wmi_sync_point() usb: ehci-orion: Handle errors of clk_prepare_enable() in probe i2c: mt65xx: fix IRQ check CIFS: Fix a potencially linear read overflow mmc: moxart: Fix issue with uninitialized dma_slave_config mmc: dw_mmc: Fix issue with uninitialized dma_slave_config i2c: s3c2410: fix IRQ check i2c: iop3xx: fix deferred probing Bluetooth: add timeout sanity check to hci_inquiry usb: gadget: mv_u3d: request_irq() after initializing UDC usb: phy: tahvo: add IRQ check usb: host: ohci-tmio: add IRQ check Bluetooth: Move shutdown callback before flushing tx and rx queue usb: phy: twl6030: add IRQ checks usb: phy: fsl-usb: add IRQ check usb: gadget: udc: at91: add IRQ check drm/msm/dsi: Fix some reference counted resource leaks Bluetooth: fix repeated calls to sco_sock_kill arm64: dts: exynos: correct GIC CPU interfaces address range on Exynos7 Bluetooth: increase BTNAMSIZ to 21 chars to fix potential buffer overflow PCI: PM: Enable PME if it can be signaled from D3cold i2c: highlander: add IRQ check net: cipso: fix warnings in netlbl_cipsov4_add_std tcp: seq_file: Avoid skipping sk during tcp_seek_last_pos Bluetooth: sco: prevent information leak in sco_conn_defer_accept() media: go7007: remove redundant initialization media: dvb-usb: fix uninit-value in vp702x_read_mac_addr media: dvb-usb: fix uninit-value in dvb_usb_adapter_dvb_init certs: Trigger creation of RSA module signing key if it's not an RSA key m68k: emu: Fix invalid free in nfeth_cleanup() udf_get_extendedattr() had no boundary checks. crypto: qat - fix reuse of completion variable crypto: qat - do not ignore errors from enable_vf2pf_comms() libata: fix ata_host_start() power: supply: max17042_battery: fix typo in MAx17042_TOFF crypto: omap-sham - clear dma flags only after omap_sham_update_dma_stop() crypto: mxs-dcp - Check for DMA mapping errors PCI: Call Max Payload Size-related fixup quirks early x86/reboot: Limit Dell Optiplex 990 quirk to early BIOS versions Revert "btrfs: compression: don't try to compress if we don't have enough pages" mm/page_alloc: speed up the iteration of max_order net: ll_temac: Remove left-over debug message powerpc/boot: Delete unneeded .globl _zimage_start powerpc/module64: Fix comment in R_PPC64_ENTRY handling mm/kmemleak.c: make cond_resched() rate-limiting more efficient s390/disassembler: correct disassembly lines alignment ipv4/icmp: l3mdev: Perform icmp error route lookup on source device routing table (v2) tc358743: fix register i2c_rd/wr function fix PM / wakeirq: Enable dedicated wakeirq for suspend USB: serial: mos7720: improve OOM-handling in read_mos_reg() usb: phy: isp1301: Fix build warning when CONFIG_OF is disabled igmp: Add ip_mc_list lock in ip_check_mc_rcu media: stkwebcam: fix memory leak in stk_camera_probe ath9k: Postpone key cache entry deletion for TXQ frames reference it ath: Modify ath_key_delete() to not need full key entry ath: Export ath_hw_keysetmac() ath9k: Clear key cache explicitly on disabling hardware ath: Use safer key clearing with key cache entries ALSA: pcm: fix divide error in snd_pcm_lib_ioctl ARM: 8918/2: only build return_address() if needed cryptoloop: add a deprecation warning qede: Fix memset corruption ARC: fix allnoconfig build warning xtensa: fix kconfig unmet dependency warning for HAVE_FUTEX_CMPXCHG ext4: fix race writing to an inline_data file while its xattrs are changing Change-Id: I1ab34741b8a456049ad2d583e71958af0d5ad3cb
OpenRISC Linux
==============
This is a port of Linux to the OpenRISC class of microprocessors; the initial
target architecture, specifically, is the 32-bit OpenRISC 1000 family (or1k).
For information about OpenRISC processors and ongoing development:
website http://openrisc.net
For more information about Linux on OpenRISC, please contact South Pole AB.
email: info@southpole.se
website: http://southpole.se
http://southpoleconsulting.com
---------------------------------------------------------------------
Build instructions for OpenRISC toolchain and Linux
===================================================
In order to build and run Linux for OpenRISC, you'll need at least a basic
toolchain and, perhaps, the architectural simulator. Steps to get these bits
in place are outlined here.
1) The toolchain can be obtained from openrisc.net. Instructions for building
a toolchain can be found at:
http://openrisc.net/toolchain-build.html
2) or1ksim (optional)
or1ksim is the architectural simulator which will allow you to actually run
your OpenRISC Linux kernel if you don't have an OpenRISC processor at hand.
git clone git://openrisc.net/jonas/or1ksim-svn
cd or1ksim
./configure --prefix=$OPENRISC_PREFIX
make
make install
3) Linux kernel
Build the kernel as usual
make ARCH=openrisc defconfig
make ARCH=openrisc
4) Run in architectural simulator
Grab the or1ksim platform configuration file (from the or1ksim source) and
together with your freshly built vmlinux, run your kernel with the following
incantation:
sim -f arch/openrisc/or1ksim.cfg vmlinux
---------------------------------------------------------------------
Terminology
===========
In the code, the following particles are used on symbols to limit the scope
to more or less specific processor implementations:
openrisc: the OpenRISC class of processors
or1k: the OpenRISC 1000 family of processors
or1200: the OpenRISC 1200 processor
---------------------------------------------------------------------
History
========
18. 11. 2003 Matjaz Breskvar (phoenix@bsemi.com)
initial port of linux to OpenRISC/or32 architecture.
all the core stuff is implemented and seams usable.
08. 12. 2003 Matjaz Breskvar (phoenix@bsemi.com)
complete change of TLB miss handling.
rewrite of exceptions handling.
fully functional sash-3.6 in default initrd.
a much improved version with changes all around.
10. 04. 2004 Matjaz Breskvar (phoenix@bsemi.com)
alot of bugfixes all over.
ethernet support, functional http and telnet servers.
running many standard linux apps.
26. 06. 2004 Matjaz Breskvar (phoenix@bsemi.com)
port to 2.6.x
30. 11. 2004 Matjaz Breskvar (phoenix@bsemi.com)
lots of bugfixes and enhancments.
added opencores framebuffer driver.
09. 10. 2010 Jonas Bonn (jonas@southpole.se)
major rewrite to bring up to par with upstream Linux 2.6.36