* refs/heads/tmp-261a54f:
Revert "soc: qcom: rpmh: Update dirty flag only when data changes"
Revert "soc: qcom: rpmh: Invalidate SLEEP and WAKE TCSes before flushing new data"
Revert "soc: qcom: rpmh-rsc: Clear active mode configuration for wake TCS"
Revert "soc: qcom: rpmh-rsc: Allow using free WAKE TCS for active request"
Revert "soc: qcom: rpmh: Dirt can only make you dirtier, not cleaner"
Linux 5.4.54
ath9k: Fix regression with Atheros 9271
ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb
dm integrity: fix integrity recalculation that is improperly skipped
ASoC: topology: fix tlvs in error handling for widget_dmixer
ASoC: topology: fix kernel oops on route addition error
ASoC: qcom: Drop HAS_DMA dependency to fix link failure
ASoC: rt5670: Add new gpio1_is_ext_spk_en quirk and enable it on the Lenovo Miix 2 10
x86, vmlinux.lds: Page-align end of ..page_aligned sections
parisc: Add atomic64_set_release() define to avoid CPU soft lockups
drm/amd/powerplay: fix a crash when overclocking Vega M
drm/amdgpu: Fix NULL dereference in dpm sysfs handlers
mmc: sdhci-of-aspeed: Fix clock divider calculation
io-mapping: indicate mapping failure
khugepaged: fix null-pointer dereference due to race
mm: memcg/slab: fix memory leak at non-root kmem_cache destroy
mm/memcg: fix refcount error while moving and swapping
mm/mmap.c: close race between munmap() and expand_upwards()/downwards()
Makefile: Fix GCC_TOOLCHAIN_DIR prefix for Clang cross compilation
vt: Reject zero-sized screen buffer size.
fbdev: Detect integer underflow at "struct fbcon_ops"->clear_margins.
/dev/mem: Add missing memory barriers for devmem_inode
serial: 8250_mtk: Fix high-speed baud rates clamping
serial: 8250: fix null-ptr-deref in serial8250_start_tx()
serial: tegra: fix CREAD handling for PIO
staging: comedi: addi_apci_1564: check INSN_CONFIG_DIGITAL_TRIG shift
staging: comedi: addi_apci_1500: check INSN_CONFIG_DIGITAL_TRIG shift
staging: comedi: ni_6527: fix INSN_CONFIG_DIGITAL_TRIG support
staging: comedi: addi_apci_1032: check INSN_CONFIG_DIGITAL_TRIG shift
staging: wlan-ng: properly check endpoint types
tty: xilinx_uartps: Really fix id assignment
iwlwifi: mvm: don't call iwl_mvm_free_inactive_queue() under RCU
Revert "cifs: Fix the target file was deleted when rename failed."
usb: xhci: Fix ASM2142/ASM3142 DMA addressing
usb: xhci-mtk: fix the failure of bandwidth allocation
binder: Don't use mmput() from shrinker function.
RISC-V: Upgrade smp_mb__after_spinlock() to iorw,iorw
drivers/perf: Prevent forced unbinding of PMU drivers
asm-generic/mmiowb: Allow mmiowb_set_pending() when preemptible()
x86: math-emu: Fix up 'cmp' insn for clang ias
arm64: Use test_tsk_thread_flag() for checking TIF_SINGLESTEP
drivers/perf: Fix kernel panic when rmmod PMU modules during perf sampling
ALSA: hda/realtek - fixup for yet another Intel reference board
hwmon: (scmi) Fix potential buffer overflow in scmi_hwmon_probe()
platform/x86: asus-wmi: allow BAT1 battery name
platform/x86: ISST: Add new PCI device ids
hwmon: (nct6775) Accept PECI Calibration as temperature source for NCT6798D
drm/amdgpu: fix preemption unit test
drm/amdgpu/gfx10: fix race condition for kiq
hwmon: (adm1275) Make sure we are reading enough data for different chips
usb: cdns3: trace: fix some endian issues
usb: cdns3: ep0: fix some endian issues
usb: gadget: udc: gr_udc: fix memleak on error handling path in gr_ep_init()
usb: dwc3: pci: add support for the Intel Jasper Lake
usb: dwc3: pci: add support for the Intel Tiger Lake PCH -H variant
Input: elan_i2c - only increment wakeup count on touch
Input: synaptics - enable InterTouch for ThinkPad X1E 1st gen
dmaengine: ioat setting ioat timeout as module parameter
dmaengine: fsl-edma: fix wrong tcd endianness for big-endian cpu
hwmon: (aspeed-pwm-tacho) Avoid possible buffer overflow
regmap: dev_get_regmap_match(): fix string comparison
spi: mediatek: use correct SPI_CFG2_REG MACRO
ARM: dts: n900: remove mmc1 card detect gpio
Input: add `SW_MACHINE_COVER`
dmaengine: tegra210-adma: Fix runtime PM imbalance on error
HID: apple: Disable Fn-key key-re-mapping on clone keyboards
HID: steam: fixes race in handling device list.
HID: alps: support devices with report id 2
HID: i2c-hid: add Mediacom FlexBook edge13 to descriptor override
scripts/gdb: fix lx-symbols 'gdb.error' while loading modules
scripts/decode_stacktrace: strip basepath from all paths
serial: exar: Fix GPIO configuration for Sealevel cards based on XR17V35X
geneve: fix an uninitialized value in geneve_changelink()
bonding: check return value of register_netdevice() in bond_newlink()
i2c: i2c-qcom-geni: Fix DMA transfer race
i2c: rcar: always clear ICSAR to avoid side effects
enetc: Remove the mdio bus on PF probe bailout
nfsd4: fix NULL dereference in nfsd/clients display code
Revert "PCI/PM: Assume ports without DLL Link Active train links in 100 ms"
net: ethernet: ave: Fix error returns in ave_init
ipvs: fix the connection sync failed in some cases
qed: suppress false-positives interrupt error messages on HW init
qed: suppress "don't support RoCE & iWARP" flooding on HW init
netdevsim: fix unbalaced locking in nsim_create()
net: dsa: microchip: call phy_remove_link_mode during probe
net: hns3: fix error handling for desc filling
net: ag71xx: add missed clk_disable_unprepare in error path of probe
ionic: fix up filter locks and debug msgs
ionic: use offset for ethtool regs data
mlxsw: destroy workqueue when trap_register in mlxsw_emad_init
bonding: check error value of register_netdevice() immediately
net: smc91x: Fix possible memory leak in smc_drv_probe()
drm: sun4i: hdmi: Fix inverted HPD result
ieee802154: fix one possible memleak in adf7242_probe
net: dp83640: fix SIOCSHWTSTAMP to update the struct with actual configuration
ASoC: Intel: bytcht_es8316: Add missed put_device()
RDMA/mlx5: Use xa_lock_irq when access to SRQ table
ax88172a: fix ax88172a_unbind() failures
vsock/virtio: annotate 'the_virtio_vsock' RCU pointer
hippi: Fix a size used in a 'pci_free_consistent()' in an error handling path
fpga: dfl: fix bug in port reset handshake
fpga: dfl: pci: reduce the scope of variable 'ret'
bnxt_en: Fix completion ring sizing with TPA enabled.
bnxt_en: Fix race when modifying pause settings.
btrfs: fix page leaks after failure to lock page for delalloc
btrfs: fix mount failure caused by race with umount
btrfs: fix double free on ulist after backref resolution failure
ASoC: rt5670: Correct RT5670_LDO_SEL_MASK
ALSA: info: Drop WARN_ON() from buffer NULL sanity check
ALSA: hda/realtek: Fixed ALC298 sound bug by adding quirk for Samsung Notebook Pen S
uprobes: Change handle_swbp() to send SIGTRAP with si_code=SI_KERNEL, to fix GDB regression
btrfs: reloc: clear DEAD_RELOC_TREE bit for orphan roots to prevent runaway balance
btrfs: reloc: fix reloc root leak and NULL pointer dereference
SUNRPC reverting d03727b248d0 ("NFSv4 fix CLOSE not waiting for direct IO compeletion")
drm/amd/display: Check DMCU Exists Before Loading
dmabuf: use spinlock to access dmabuf->name
ARM: dts: imx6qdl-gw551x: fix audio SSI
ARM: dts: imx6qdl-gw551x: Do not use 'simple-audio-card,dai-link'
irqdomain/treewide: Keep firmware node unconditionally allocated
fuse: fix weird page warning
drivers/firmware/psci: Fix memory leakage in alloc_init_cpu_groups()
dm: use bio_uninit instead of bio_disassociate_blkg
scsi: dh: Add Fujitsu device to devinfo and dh lists
scsi: mpt3sas: Fix error returns in BRM_status_show
drm/nouveau/i2c/g94-: increase NV_PMGR_DP_AUXCTL_TRANSACTREQ timeout
net: sky2: initialize return of gm_phy_read
ALSA: hda/hdmi: fix failures at PCM open on Intel ICL and later
drivers/net/wan/lapbether: Fixed the value of hard_header_len
scsi: mpt3sas: Fix unlock imbalance
xtensa: update *pos in cpuinfo_op.next
xtensa: fix __sync_fetch_and_{and,or}_4 declarations
scsi: scsi_transport_spi: Fix function pointer check
mac80211: allow rx of mesh eapol frames with default rx key
pinctrl: amd: fix npins for uart0 in kerncz_groups
gpio: arizona: put pm_runtime in case of failure
gpio: arizona: handle pm_runtime_get_sync failure case
soc: qcom: rpmh: Dirt can only make you dirtier, not cleaner
ANDROID: build: update ABI definitions
ANDROID: update the kernel release format for GKI
ANDROID: GKI: update clocksource abi due to upstream fixes needed for VDSO backport
UPSTREAM: arm64: arch_timer: Disable the compat vdso for cores affected by ARM64_WORKAROUND_1418040
UPSTREAM: arm64: arch_timer: Allow an workaround descriptor to disable compat vdso
UPSTREAM: arm64: Introduce a way to disable the 32bit vdso
ANDROID: staging: android: ion: Fix compilation error for ion_trace.h
ANDROID: GKI: enable CONFIG_SCSI_UFS_BSG=y
ANDROID: Incremental fs: magic number compatible 32-bit
ANDROID: kbuild: don't merge .*..compoundliteral in modules
ANDROID: KABI updates for db845c (QCOM_COMMAND_DB fixups)
ANDROID: soc: qcom: cmd-db: Allow COMMAND_DB driver to be loaded as a module
ANDROID: GKI: preserve ABI for struct sock_cgroup_data
Revert "genetlink: remove genl_bind"
Revert "arm64/alternatives: use subsections for replacement sequences"
ANDROID: KABI updates for db845c (USB_EHCI_HCD, USB_EHCI_HCD_PLATFORM and DWC3 fixups)
ANDROID: db845c_gki.fragment: Remove DWC3 modules built into GKI
ANDROID: db845c_gki.fragment: Remove modules built into GKI
ANDROID: power: wakeup_reason: refine wakeup logs
ANDROID: power: wakeup_reason: export log_threaded_irq_wakeup_reason
Linux 5.4.53
gpio: pca953x: disable regmap locking for automatic address incrementing
drm/i915/gvt: Fix two CFL MMIO handling caused by regression.
iommu/vt-d: Make Intel SVM code 64-bit only
ionic: export features for vlans to use
spi: sprd: switch the sequence of setting WDG_LOAD_LOW and _HIGH
rxrpc: Fix trace string
libceph: don't omit recovery_deletes in target_copy()
block: fix get_max_segment_size() overflow on 32bit arch
block: fix splitting segments on boundary masks
drm/i915/gt: Ignore irq enabling on the virtual engines
drm/amdgpu/sdma5: fix wptr overwritten in ->get_wptr()
genirq/affinity: Handle affinity setting on inactive interrupts correctly
sched/fair: handle case of task_h_load() returning 0
sched: Fix unreliable rseq cpu_id for new tasks
arm64: compat: Ensure upper 32 bits of x0 are zero on syscall return
arm64: ptrace: Consistently use pseudo-singlestep exceptions
arm64: ptrace: Override SPSR.SS when single-stepping is enabled
thermal/drivers/cpufreq_cooling: Fix wrong frequency converted from power
thermal: int3403_thermal: Downgrade error message
misc: atmel-ssc: lock with mutex instead of spinlock
dmaengine: fsl-edma-common: correct DSIZE_32BYTE
dmaengine: mcf-edma: Fix NULL pointer exception in mcf_edma_tx_handler
dmaengine: fsl-edma: Fix NULL pointer exception in fsl_edma_tx_handler
intel_th: Fix a NULL dereference when hub driver is not loaded
intel_th: pci: Add Emmitsburg PCH support
intel_th: pci: Add Tiger Lake PCH-H support
intel_th: pci: Add Jasper Lake CPU support
powerpc/pseries/svm: Fix incorrect check for shared_lppaca_size
powerpc/book3s64/pkeys: Fix pkey_access_permitted() for execute disable pkey
hwmon: (emc2103) fix unable to change fan pwm1_enable attribute
riscv: use 16KB kernel stack on 64-bit
timer: Fix wheel index calculation on last level
timer: Prevent base->clk from moving backward
scsi: megaraid_sas: Remove undefined ENABLE_IRQ_POLL macro
uio_pdrv_genirq: fix use without device tree and no interrupt
uio_pdrv_genirq: Remove warning when irq is not specified
Input: elan_i2c - add more hardware ID for Lenovo laptops
Input: i8042 - add Lenovo XiaoXin Air 12 to i8042 nomux list
mei: bus: don't clean driver pointer
Revert "zram: convert remaining CLASS_ATTR() to CLASS_ATTR_RO()"
fuse: Fix parameter for FS_IOC_{GET,SET}FLAGS
fuse: use ->reconfigure() instead of ->remount_fs()
fuse: ignore 'data' argument of mount(..., MS_REMOUNT)
ovl: fix unneeded call to ovl_change_flags()
ovl: relax WARN_ON() when decoding lower directory file handle
ovl: inode reference leak in ovl_is_inuse true case.
ovl: fix regression with re-formatted lower squashfs
serial: mxs-auart: add missed iounmap() in probe failure and remove
virtio: virtio_console: add missing MODULE_DEVICE_TABLE() for rproc serial
Revert "tty: xilinx_uartps: Fix missing id assignment to the console"
virt: vbox: Fix guest capabilities mask check
virt: vbox: Fix VBGL_IOCTL_VMMDEV_REQUEST_BIG and _LOG req numbers to match upstream
USB: serial: option: add Quectel EG95 LTE modem
USB: serial: option: add GosunCn GM500 series
USB: serial: ch341: add new Product ID for CH340
USB: serial: cypress_m8: enable Simply Automated UPB PIM
USB: serial: iuu_phoenix: fix memory corruption
usb: gadget: function: fix missing spinlock in f_uac1_legacy
usb: chipidea: core: add wakeup support for extcon
usb: dwc2: Fix shutdown callback in platform
USB: c67x00: fix use after free in c67x00_giveback_urb
ALSA: hda/realtek - Enable Speaker for ASUS UX563
ALSA: hda/realtek - Enable Speaker for ASUS UX533 and UX534
ALSA: hda/realtek: Enable headset mic of Acer TravelMate B311R-31 with ALC256
ALSA: hda/realtek: enable headset mic of ASUS ROG Zephyrus G14(G401) series with ALC289
ALSA: hda/realtek - change to suitable link model for ASUS platform
ALSA: usb-audio: Fix race against the error recovery URB submission
ALSA: line6: Sync the pending work cancel at disconnection
ALSA: line6: Perform sanity check for each URB creation
HID: quirks: Ignore Simply Automated UPB PIM
HID: quirks: Always poll Obins Anne Pro 2 keyboard
HID: magicmouse: do not set up autorepeat
HID: logitech-hidpp: avoid repeated "multiplier = " log messages
slimbus: core: Fix mismatch in of_node_get/put
clk: qcom: gcc: Add missing UFS clocks for SM8150
clk: qcom: gcc: Add GPU and NPU clocks for SM8150
mtd: rawnand: oxnas: Release all devices in the _remove() path
mtd: rawnand: oxnas: Unregister all devices on error
mtd: rawnand: oxnas: Keep track of registered devices
mtd: rawnand: brcmnand: fix CS0 layout
mtd: rawnand: brcmnand: correctly verify erased pages
mtd: rawnand: timings: Fix default tR_max and tCCS_min timings
mtd: rawnand: marvell: Fix probe error path
mtd: rawnand: marvell: Use nand_cleanup() when the device is not yet registered
mtd: rawnand: marvell: Fix the condition on a return code
RDMA/mlx5: Verify that QP is created with RQ or SQ
soc: qcom: rpmh-rsc: Allow using free WAKE TCS for active request
soc: qcom: rpmh-rsc: Clear active mode configuration for wake TCS
soc: qcom: rpmh: Invalidate SLEEP and WAKE TCSes before flushing new data
soc: qcom: rpmh: Update dirty flag only when data changes
perf stat: Zero all the 'ena' and 'run' array slot stats for interval mode
PCI/PM: Call .bridge_d3() hook only if non-NULL
habanalabs: Align protection bits configuration of all TPCs
apparmor: ensure that dfa state tables have entries
soc: qcom: socinfo: add missing soc_id sysfs entry
arm: dts: mt7623: add phy-mode property for gmac2
copy_xstate_to_kernel: Fix typo which caused GDB regression
regmap: debugfs: Don't sleep while atomic for fast_io regmaps
keys: asymmetric: fix error return code in software_key_query()
arm64: dts: spcfpga: Align GIC, NAND and UART nodenames with dtschema
ARM: dts: socfpga: Align L2 cache-controller nodename with dtschema
xprtrdma: fix incorrect header size calculations
Revert "thermal: mediatek: fix register index error"
ARM: dts: Fix dcan driver probe failed on am437x platform
fuse: don't ignore errors from fuse_writepages_fill()
NFS: Fix interrupted slots by sending a solo SEQUENCE operation
clk: AST2600: Add mux for EMMC clock
clk: mvebu: ARMADA_AP_CPU_CLK needs to select ARMADA_AP_CP_HELPER
staging: comedi: verify array index is correct before using it
usb: gadget: udc: atmel: fix uninitialized read in debug printk
spi: spi-sun6i: sun6i_spi_transfer_one(): fix setting of clock rate
dmaengine: dmatest: stop completed threads when running without set channel
dmaengine: dw: Initialize channel before each transfer
iio: adc: ad7780: Fix a resource handling path in 'ad7780_probe()'
bus: ti-sysc: Do not disable on suspend for no-idle
bus: ti-sysc: Fix sleeping function called from invalid context for RTC quirk
bus: ti-sysc: Fix wakeirq sleeping function called from invalid context
arm64: dts: meson-gxl-s805x: reduce initial Mali450 core frequency
arm64: dts: meson: add missing gxl rng clock
phy: sun4i-usb: fix dereference of pointer phy0 before it is null checked
dmaengine: sh: usb-dmac: set tx_result parameters
soundwire: intel: fix memory leak with devm_kasprintf
iio:health:afe4404 Fix timestamp alignment and prevent data leak.
ALSA: usb-audio: Add registration quirk for Kingston HyperX Cloud Flight S
bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit
ACPI: video: Use native backlight on Acer TravelMate 5735Z
Input: mms114 - add extra compatible for mms345l
ALSA: usb-audio: Add quirk for Focusrite Scarlett 2i2
ALSA: usb-audio: Add registration quirk for Kingston HyperX Cloud Alpha S
ACPI: video: Use native backlight on Acer Aspire 5783z
ALSA: usb-audio: Rewrite registration quirk handling
mmc: sdhci: do not enable card detect interrupt for gpio cd type
doc: dt: bindings: usb: dwc3: Update entries for disabling SS instances in park mode
ALSA: usb-audio: Create a registration quirk for Kingston HyperX Amp (0951:16d8)
Input: goodix - fix touch coordinates on Cube I15-TC
ALSA: usb-audio: Add support for MOTU MicroBook IIc
bus: ti-sysc: Detect EDMA and set quirk flags for tptc
arm64: dts: g12-common: add parkmode_disable_ss_quirk on DWC3 controller
bus: ti-sysc: Detect display subsystem related devices
bus: ti-sysc: Handle module unlock quirk needed for some RTC
bus: ti-sysc: Consider non-existing registers too when matching quirks
bus: ti-sysc: Rename clk related quirks to pre_reset and post_reset quirks
scsi: sr: remove references to BLK_DEV_SR_VENDOR, leave it enabled
drm/sun4i: tcon: Separate quirks for tcon0 and tcon1 on A20
ARM: at91: pm: add quirk for sam9x60's ulp1
HID: quirks: Remove ITE 8595 entry from hid_have_special_driver
mmc: mmci: Support any block sizes for ux500v2 and qcom variant
ARM: OMAP2+: use separate IOMMU pdata to fix DRA7 IPU1 boot
ARM: OMAP2+: Add workaround for DRA7 DSP MStandby errata i879
ARM: OMAP4+: remove pdata quirks for omap4+ iommus
net: sfp: add some quirks for GPON modules
net: sfp: add support for module quirks
Revert "usb/xhci-plat: Set PM runtime as active on resume"
Revert "usb/ehci-platform: Set PM runtime as active on resume"
Revert "usb/ohci-platform: Fix a warning when hibernating"
net: ethernet: mvneta: Add back interface mode validation
net: ethernet: mvneta: Do not error out in non serdes modes
net: macb: call pm_runtime_put_sync on failure path
of: of_mdio: Correct loop scanning logic
net: dsa: bcm_sf2: Fix node reference count
spi: spi-fsl-dspi: Fix lockup if device is shutdown during SPI transfer
iio:health:afe4403 Fix timestamp alignment and prevent data leak.
iio:pressure:ms5611 Fix buffer element alignment
iio:humidity:hts221 Fix alignment and data leak issues
iio: pressure: zpa2326: handle pm_runtime_get_sync failure
iio: mma8452: Add missed iio_device_unregister() call in mma8452_probe()
iio: core: add missing IIO_MOD_H2/ETHANOL string identifiers
iio: magnetometer: ak8974: Fix runtime PM imbalance on error
iio:humidity:hdc100x Fix alignment and data leak issues
iio:magnetometer:ak8974: Fix alignment and data leak issues
arm64/alternatives: don't patch up internal branches
i2c: eg20t: Load module automatically if ID matches
gfs2: read-only mounts should grab the sd_freeze_gl glock
tpm_tis: extra chip->ops check on error path in tpm_tis_core_init
arm64/alternatives: use subsections for replacement sequences
cifs: prevent truncation from long to int in wait_for_free_credits
dt-bindings: mailbox: zynqmp_ipi: fix unit address
m68k: mm: fix node memblock init
m68k: nommu: register start of the memory with memblock
blk-mq-debugfs: update blk_queue_flag_name[] accordingly for new flags
thermal/drivers: imx: Fix missing of_node_put() at probe time
x86/fpu: Reset MXCSR to default in kernel_fpu_begin()
drm/exynos: fix ref count leak in mic_pre_enable
drm/exynos: Properly propagate return value in drm_iommu_attach_device()
drm/msm/dpu: allow initialization of encoder locks during encoder init
drm/msm: fix potential memleak in error branch
arm64: arch_timer: Disable the compat vdso for cores affected by ARM64_WORKAROUND_1418040
arm64: arch_timer: Allow an workaround descriptor to disable compat vdso
arm64: Introduce a way to disable the 32bit vdso
ip: Fix SO_MARK in RST, ACK and ICMP packets
cgroup: Fix sock_cgroup_data on big-endian.
cgroup: fix cgroup_sk_alloc() for sk_clone_lock()
tcp: md5: allow changing MD5 keys in all socket states
tcp: md5: refine tcp_md5_do_add()/tcp_md5_hash_key() barriers
vlan: consolidate VLAN parsing code and limit max parsing depth
tcp: md5: do not send silly options in SYNCOOKIES
tcp: md5: add missing memory barriers in tcp_md5_do_add()/tcp_md5_hash_key()
tcp: make sure listeners don't initialize congestion-control state
tcp: fix SO_RCVLOWAT possible hangs under high mem pressure
sched: consistently handle layer3 header accesses in the presence of VLANs
net: usb: qmi_wwan: add support for Quectel EG95 LTE modem
net_sched: fix a memory leak in atm_tc_init()
net: dsa: microchip: set the correct number of ports
net: Added pointer check for dst->ops->neigh_lookup in dst_neigh_lookup_skb
llc: make sure applications use ARPHRD_ETHER
l2tp: remove skb_dst_set() from l2tp_xmit_skb()
ipv6: Fix use of anycast address with loopback
ipv6: fib6_select_path can not use out path for nexthop objects
ipv4: fill fl4_icmp_{type,code} in ping_v4_sendmsg
genetlink: remove genl_bind
bridge: mcast: Fix MLD2 Report IPv6 payload length check
net: rmnet: fix lower interface leak
net: atlantic: fix ip dst and ipv6 address filters
crypto: atmel - Fix build error of CRYPTO_AUTHENC
crypto: atmel - Fix selection of CRYPTO_AUTHENC
ANDROID: GKI: update abi symbol lists now that CONFIG_DWC3 is enabled.
ANDROID: GKI: Enable CONFIG_USB_DWC3
ANDROID: ABI: add the symbols of dwc3.ko and sprd-dma.ko to unisoc
ANDROID: ABI: Update the ABI whitelist for QCOM
ANDROID: GKI: Update CF abi list for virtio-console
UPSTREAM: lkdtm/heap: Avoid edge and middle of slabs
UPSTREAM: lkdtm: Avoid more compiler optimizations for bad writes
ANDROID: GKI: Update ABI after RPMH config change
ANDROID: GKI: Adjust symbol lists after RPMH removed from gki_defconfig
ANDROID: db845c_gki.fragment: Add QCOM_RPMH and QCOM_RPMHPD as modules
ANDROID: gki_defconfig: Remove QCOM_RPMH from the gki_defconfig
ANDROID: Kconfig.gki: Remove GKI_QCOM_CLKS_CONFIGS and QCOM_RPMHPD from GKI_HACKS config option
FROMLIST: soc: qcom: rpmh: Allow RPMH driver to be loaded as a module
UPSTREAM: soc: qcom: rpmhpd: Allow RPMHPD driver to be loaded as a module
ANDROID: GKI: Export memblock_free to drivers
ANDROID: GKI: do not export symbol_get/put()
ANDROID: add xfs back to allmodconfig build tests
FROMLIST: rpmsg: core: Add signal API support
ANDROID: GKI: Fix x86 warning on DMA_VIRTUAL_CHANNELS
ANDROID: GKI: Update ABI and export list for qcom
Revert "ANDROID: net: enable wireless core features with GKI_LEGACY_WEXT_ALLCONFIG"
Revert "ALSA: compress: fix partial_drain completion state"
Conflicts:
Documentation/devicetree/bindings
Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
Documentation/devicetree/bindings/usb/dwc3.txt
android/abi_gki_aarch64_qcom
drivers/soc/qcom/Kconfig
drivers/soc/qcom/socinfo.c
drivers/usb/host/xhci-plat.c
kernel/sched/core.c
Change-Id: If4d45d5447eb2b1b86326bae8c3844fe565a0b42
Signed-off-by: Blagovest Kolenichev <bkolenichev@codeaurora.org>
Enable touch driver in touch driver.
Support drm_panel callback to be notified when screen on/off.
Add new property "synaptics,firmware-name" when different modules
with same touch IC.
Change-Id: I58159ce531913108e702227c5474fdc2f539d2d3
Signed-off-by: Fei Mao <feim1@codeaurora.org>
Signed-off-by: Ritesh Kumar <riteshk@codeaurora.org>
Fix up a number of headers to work with KERNEL_HEADER_TEST ahead
of turning it on by default.
Change-Id: Ic0dedbaddba2fa62ec60d93bf3e4ef06ededa4cc
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Fix up a bunch of headers so that they pass KERNEL_HEADER_TEST to ensure
that they are self-contained.
Change-Id: Ic0dedbad91f70263452c9a809333fe93c8ee2266
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
The qpnp-power-on driver provides support for key presses via
several key specific PMIC inputs. It also supports reading
power-on reasons and configuring the power-off type (i.e.
restart, shutdown, etc).
This snapshot is taken as of msm-4.19
commit 47598dd0e809 ("input: misc: qpnp-power-on: add support
to power off a modem chip").
Note that support for boot_reason, cold_boot, and ship_mode
configuration was removed as these have unmet dependencies and
are no longer needed.
Change-Id: I8105cf74d65609932146157f82a8e99f29a4dde2
Signed-off-by: David Collins <collinsd@codeaurora.org>
Looks like the Bios of the Lenovo Legion Y7000 is using ELAN061B
when the actual device is supposed to be used with hid-multitouch.
Remove it from the list of the supported device, hoping that
no one will complain about the loss in functionality.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203467
Fixes: 738c06d0e4 ("Input: elan_i2c - add hardware ID for multiple Lenovo laptops")
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There are no current users of the platform data in the tree, and
any new users should either use device tree, or static device
properties to describe the device.
This change drop the platform data definition and handling and moves the
driver over to generic device properties API. We also drop support for the
external clock. If it is needed we will have to extend the bindings to
supply the clock reference and handle it properly in the driver.
Also, wakeup setting should be coming from I2C client.
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This driver can use GPIO descriptors rather than GPIO numbers
without any problems, convert it. Name the field variables after
the actual pins on the chip rather than the "reset" and "touch"
names from the devicetree bindings that are vaguely inaccurate.
No in-tree users pass GPIO numbers in platform data so drop
this. Descriptor tables can be used to get these GPIOs from a board
file if need be.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Elan_i2c and hid-quirks work in conjunction to decide which devices each
driver will handle. Elan_i2c has a whitelist of devices that should be
consumed by hid-quirks so that there is one master list of devices to
handoff between the drivers. Put the ids in a header file so that
hid-quirks can consume it instead of duplicating the list.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 503 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 59 temple place suite 330 boston ma 02111
1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 136 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.384967451@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this software is licensed under the terms of the gnu general public
license version 2 as published by the free software foundation and
may be copied distributed and modified under those terms this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 285 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 and
only version 2 as published by the free software foundation this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details you should have received a
copy of the gnu general public license along with this program if
not write to the free software foundation inc 51 franklin street
fifth floor boston ma 02110 1301 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 94 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141334.043630402@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is not a single user of the ili210x platform data in the kernel,
just drop it.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This driver was merged in 2011 as a tool for detecting the orientation
of a screen. The device driver assumes board file setup using the
platform data from <linux/input/gpio_tilt.h>. But no boards in the
kernel tree defines this platform data.
As I am faced with refactoring drivers to use GPIO descriptors and
pass decriptor tables from boards, or use the device tree device
drivers like these creates a serious problem: I cannot fix them and
cannot test them, not even compile-test them with a system actually
using it (no in-tree boardfile).
I suggest to delete this driver and rewrite it using device tree if
it is still in use on actively maintained systems.
I can also offer to rewrite it out of the blue using device tree if
someone promise to test it and help me iterate it.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Patchwork-Id: 10133609
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gpiod API allows standard way of specifying GPIO polarity and takes it into
account when reading or setting GPIO state. It also allows us to switch to
common way of obtaining GPIO descriptor and away form legacy platform data.
Reviewed-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The gpio-matrix-keypad driver normally sets inactive columns as inputs
while scanning. This does not work for all hardware, which may require
the inactive columns to be actively driven in order to overcome any
pull-ups/downs on the columns.
Signed-off-by: David Rivshin <drivshin@allworx.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Let's drop legacy platform data support (there are no users in mainline)
and switch to using generic device properties, which will make the driver
simpler (non-OF boards can use property sets to describe hardware).
Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of being OF-specific, let's switch to using generic device
properties, which will make this code usable on ACPI, device tree and
legacy boards that use property sets.
As part of the change let's rename matrix_keypad_parse_of_params() to
matrix_keypad_parse_properties().
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Extend touchscreen_parse_properties() with support for the
touchscreen-inverted-x/y and touchscreen-swapped-x-y properties and
add touchscreen_set_mt_pos() and touchscreen_report_pos() helper
functions for storing coordinates into a input_mt_pos struct, or
directly reporting them, taking these properties into account.
This commit also modifies the existing callers of
touchscreen_parse_properties() to pass in NULL for the new third
argument, keeping the existing behavior.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Drop support for platform data passed via a C-structure and switch to
device properties instead, which should make the driver compatible
with all platforms: OF, ACPI and static boards. Static boards should
use property sets to communicate device parameters to the driver.
Signed-off-by: Oreste Salerno <oreste.salerno@tomtom.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We do not have any users of platform data in the tree and all newer
platforms are either DT or ACPI, so let's drop handling of platform data.
Tested-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The current/old gpio framework used doesn't properly listen to
ACTIVE_LOW and ACTIVE_HIGH flags. The newer gpio framework takes into
account these flags when setting gpio values.
Since the values being output were based on voltage and not logic they
change to reflect this difference. Also use gpiod_set_value_cansleep since
wake and reset pins can be provided by bus based io expanders.
Switch from msleep(5) to udelay_range(5000,6000) to avoid check patch
warning.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Let's move driver's platform data definitions from include/linux/input/
into include/linux/platform_data/ so that it stays with the rest of
platform data definitions.
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Let's switch form OF to device properties so that common parsing code could
work not only on device tree but also on ACPI-based platforms.
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When applying touchscreen parameters specified in device tree let's make
sure we keep whatever setup was done by the driver and not reset the
missing values to zero.
Reported-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some devices are not fast enough to differentiate between a fast-moving
contact and a new contact. This problem cannot be fully resolved because
information is truly missing, but it is possible to safe-guard against
obvious mistakes by restricting movement with a maximum displacement.
The new problem formulation for dmax > 0 cannot benefit from the speedup
for positive definite matrices, but since the convergence is faster, the
result is about the same. For a handful of contacts, the latency difference
is truly negligible.
Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Henrik Rydberg <rydberg@bitmath.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some semi-mt drivers use the slots in a manual way, but may still
want to call parts of the frame synchronization logic. This patch
makes input_mt_drop_unused callable from those drivers.
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some variants of the Pixcir touch controller support up to 5 simultaneous
fingers and hardware tracking IDs. Prepare the driver for that.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add common DT binding documentation for touchscreen devices and
implement input_parse_touchscreen_of_params, which parses the common
properties and configures the input device accordingly.
The method currently does not interpret the axis inversion properties,
since there is no matching flag in the generic linux input device.
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Get rid of the attb_read_val() platform hook. Instead, read the ATTB gpio
directly from the driver.
Fail if valid ATTB gpio is not provided by patform data.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Introduce helper functions to configure power and interrupt registers.
Default to IDLE mode on probe as device supports auto wakeup to ACVIE mode
on detecting finger touch.
Configure interrupt mode and polarity on start up. Power down on device
closure or module removal.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver is only supported on DT enabled platforms. Convert the
driver to DT so that it can probe properly.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver is only supported on DT enabled platforms. Convert the
driver to DT so that it can probe properly.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull MFD update from Samuel Ortiz:
"For the 3.11 merge we only have one new MFD driver for the Kontron
PLD.
But we also have:
- Support for the TPS659038 PMIC from the palmas driver.
- Intel's Coleto Creek and Avoton SoCs support from the lpc_ich
driver.
- RTL8411B support from the rtsx driver.
- More DT support for the Arizona, max8998, twl4030-power and the
ti_am335x_tsadc drivers.
- The SSBI driver move under MFD.
- A conversion to the devm_* API for most of the MFD drivers.
- The twl4030-power got split from twl-core into its own module.
- A major ti_am335x_adc cleanup, leading to a proper DT support.
- Our regular arizona and wm* updates and cleanups from the Wolfson
folks.
- A better error handling and initialization, and a regulator
subdevice addition for the 88pm80x driver.
- A bulk platform_set_drvdata() call removal that's no longer need
since commit 0998d06310 ("device-core: Ensure drvdata = NULL when
no driver is bound")
* tag 'mfd-3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (102 commits)
mfd: sec: Provide max_register to regmap
mfd: wm8994: Remove duplicate check for active JACKDET
MAINTAINERS: Add include directory to MFD file patterns
mfd: sec: Remove fields not used since regmap conversion
watchdog: Kontron PLD watchdog timer driver
mfd: max8998: Add support for Device Tree
regulator: max8998: Use arrays for specifying voltages in platform data
mfd: max8998: Add irq domain support
regulator: palmas: Add TPS659038 support
mfd: Kontron PLD mfd driver
mfd: palmas: Add TPS659038 PMIC support
mfd: palmas: Add SMPS10_BOOST feature
mfd: palmas: Check if irq is valid
mfd: lpc_ich: iTCO_wdt patch for Intel Coleto Creek DeviceIDs
mfd: twl-core: Change TWL6025 references to TWL6032
mfd: davinci_voicecodec: Fix build breakage
mfd: vexpress: Make the driver optional for arm and arm64
mfd: htc-egpio: Use devm_ioremap_nocache() instead of ioremap_nocache()
mfd: davinci_voicecodec: Convert to use devm_* APIs
mfd: twl4030-power: Fix relocking on error
...
