Changes in 5.4.244
driver core: add a helper to setup both the of_node and fwnode of a device
drm/mipi-dsi: Set the fwnode for mipi_dsi_device
ARM: 9296/1: HP Jornada 7XX: fix kernel-doc warnings
linux/dim: Do nothing if no time delta between samples
net: Fix load-tearing on sk->sk_stamp in sock_recv_cmsgs().
netfilter: conntrack: fix possible bug_on with enable_hooks=1
netlink: annotate accesses to nlk->cb_running
net: annotate sk->sk_err write from do_recvmmsg()
net: tap: check vlan with eth_type_vlan() method
net: add vlan_get_protocol_and_depth() helper
ipvlan:Fix out-of-bounds caused by unclear skb->cb
net: datagram: fix data-races in datagram_poll()
af_unix: Fix a data race of sk->sk_receive_queue->qlen.
af_unix: Fix data races around sk->sk_shutdown.
fs: hfsplus: remove WARN_ON() from hfsplus_cat_{read,write}_inode()
drm/amd/display: Use DC_LOG_DC in the trasform pixel function
regmap: cache: Return error in cache sync operations for REGCACHE_NONE
memstick: r592: Fix UAF bug in r592_remove due to race condition
firmware: arm_sdei: Fix sleep from invalid context BUG
ACPI: EC: Fix oops when removing custom query handlers
drm/tegra: Avoid potential 32-bit integer overflow
ACPICA: Avoid undefined behavior: applying zero offset to null pointer
ACPICA: ACPICA: check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects
wifi: brcmfmac: cfg80211: Pass the PMK in binary instead of hex
ext2: Check block size validity during mount
scsi: lpfc: Prevent lpfc_debugfs_lockstat_write() buffer overflow
net: pasemi: Fix return type of pasemi_mac_start_tx()
net: Catch invalid index in XPS mapping
scsi: target: iscsit: Free cmds before session free
lib: cpu_rmap: Avoid use after free on rmap->obj array entries
scsi: message: mptlan: Fix use after free bug in mptlan_remove() due to race condition
gfs2: Fix inode height consistency check
ext4: set goal start correctly in ext4_mb_normalize_request
ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa()
f2fs: fix to drop all dirty pages during umount() if cp_error is set
samples/bpf: Fix fout leak in hbm's run_bpf_prog
wifi: iwlwifi: pcie: fix possible NULL pointer dereference
wifi: iwlwifi: pcie: Fix integer overflow in iwl_write_to_user_buf
wifi: iwlwifi: dvm: Fix memcpy: detected field-spanning write backtrace
Bluetooth: L2CAP: fix "bad unlock balance" in l2cap_disconnect_rsp
staging: rtl8192e: Replace macro RTL_PCI_DEVICE with PCI_DEVICE
HID: logitech-hidpp: Don't use the USB serial for USB devices
HID: logitech-hidpp: Reconcile USB and Unifying serials
spi: spi-imx: fix MX51_ECSPI_* macros when cs > 3
HID: wacom: generic: Set battery quirk only when we see battery data
usb: typec: tcpm: fix multiple times discover svids error
serial: 8250: Reinit port->pm on port specific driver unbind
mcb-pci: Reallocate memory region to avoid memory overlapping
sched: Fix KCSAN noinstr violation
recordmcount: Fix memory leaks in the uwrite function
RDMA/core: Fix multiple -Warray-bounds warnings
clk: tegra20: fix gcc-7 constant overflow warning
iommu/arm-smmu-v3: Acknowledge pri/event queue overflow if any
Input: xpad - add constants for GIP interface numbers
phy: st: miphy28lp: use _poll_timeout functions for waits
mfd: dln2: Fix memory leak in dln2_probe()
btrfs: replace calls to btrfs_find_free_ino with btrfs_find_free_objectid
btrfs: fix space cache inconsistency after error loading it from disk
ASoC: fsl_micfil: register platform component before registering cpu dai
cpupower: Make TSC read per CPU for Mperf monitor
af_key: Reject optional tunnel/BEET mode templates in outbound policies
net: fec: Better handle pm_runtime_get() failing in .remove()
ALSA: firewire-digi00x: prevent potential use after free
vsock: avoid to close connected socket after the timeout
serial: arc_uart: fix of_iomap leak in `arc_serial_probe`
ip6_gre: Fix skb_under_panic in __gre6_xmit()
ip6_gre: Make o_seqno start from 0 in native mode
ip_gre, ip6_gre: Fix race condition on o_seqno in collect_md mode
erspan: get the proto with the md version for collect_md
net: hns3: fix sending pfc frames after reset issue
net: hns3: fix reset delay time to avoid configuration timeout
media: netup_unidvb: fix use-after-free at del_timer()
drm/exynos: fix g2d_open/close helper function definitions
net: nsh: Use correct mac_offset to unwind gso skb in nsh_gso_segment()
net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()
net: bcmgenet: Restore phy_stop() depending upon suspend/close
wifi: iwlwifi: mvm: don't trust firmware n_channels
cassini: Fix a memory leak in the error handling path of cas_init_one()
igb: fix bit_shift to be in [1..8] range
vlan: fix a potential uninit-value in vlan_dev_hard_start_xmit()
USB: usbtmc: Fix direction for 0-length ioctl control messages
usb-storage: fix deadlock when a scsi command timeouts more than once
USB: UHCI: adjust zhaoxin UHCI controllers OverCurrent bit value
usb: dwc3: debugfs: Resume dwc3 before accessing registers
usb: typec: altmodes/displayport: fix pin_assignment_show
ALSA: hda: Fix Oops by 9.1 surround channel names
ALSA: hda: Add NVIDIA codec IDs a3 through a7 to patch table
ALSA: hda/realtek: Add a quirk for HP EliteDesk 805
ALSA: hda/realtek: Add quirk for 2nd ASUS GU603
can: j1939: recvmsg(): allow MSG_CMSG_COMPAT flag
can: kvaser_pciefd: Set CAN_STATE_STOPPED in kvaser_pciefd_stop()
can: kvaser_pciefd: Call request_irq() before enabling interrupts
can: kvaser_pciefd: Empty SRB buffer in probe
can: kvaser_pciefd: Clear listen-only bit if not explicitly requested
can: kvaser_pciefd: Do not send EFLUSH command on TFD interrupt
can: kvaser_pciefd: Disable interrupts in probe error path
KVM: x86: do not report a vCPU as preempted outside instruction boundaries
statfs: enforce statfs[64] structure initialization
serial: Add support for Advantech PCI-1611U card
ceph: force updating the msg pointer in non-split case
tpm/tpm_tis: Disable interrupts for more Lenovo devices
powerpc/64s/radix: Fix soft dirty tracking
nilfs2: fix use-after-free bug of nilfs_root in nilfs_evict_inode()
netfilter: nftables: add nft_parse_register_load() and use it
netfilter: nftables: add nft_parse_register_store() and use it
netfilter: nftables: statify nft_parse_register()
netfilter: nf_tables: validate registers coming from userspace.
netfilter: nf_tables: add nft_setelem_parse_key()
netfilter: nf_tables: allow up to 64 bytes in the set element data area
netfilter: nf_tables: stricter validation of element data
netfilter: nf_tables: validate NFTA_SET_ELEM_OBJREF based on NFT_SET_OBJECT flag
netfilter: nf_tables: hold mutex on netns pre_exit path
HID: wacom: Force pen out of prox if no events have been received in a while
HID: wacom: Add new Intuos Pro Small (PTH-460) device IDs
HID: wacom: add three styli to wacom_intuos_get_tool_type
lib/string_helpers: Introduce string_upper() and string_lower() helpers
usb: gadget: u_ether: Convert prints to device prints
usb: gadget: u_ether: Fix host MAC address case
vc_screen: rewrite vcs_size to accept vc, not inode
vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF
s390/qdio: get rid of register asm
s390/qdio: fix do_sqbs() inline assembly constraint
watchdog: sp5100_tco: Immediately trigger upon starting.
spi: fsl-spi: Re-organise transfer bits_per_word adaptation
spi: fsl-cpm: Use 16 bit mode for large transfers with even size
mt76: mt7615: Fix build with older compilers
ALSA: hda/ca0132: add quirk for EVGA X299 DARK
ALSA: hda/realtek: Enable headset onLenovo M70/M90
m68k: Move signal frame following exception on 68020/030
parisc: Handle kgdb breakpoints only in kernel context
parisc: Allow to reboot machine after system halt
gpio: mockup: Fix mode of debugfs files
btrfs: use nofs when cleaning up aborted transactions
x86/mm: Avoid incomplete Global INVLPG flushes
selftests/memfd: Fix unknown type name build failure
parisc: Fix flush_dcache_page() for usage from irq context
x86/topology: Fix erroneous smp_num_siblings on Intel Hybrid platforms
debugobjects: Don't wake up kswapd from fill_pool()
fbdev: udlfb: Fix endpoint check
net: fix stack overflow when LRO is disabled for virtual interfaces
udplite: Fix NULL pointer dereference in __sk_mem_raise_allocated().
USB: core: Add routines for endpoint checks in old drivers
USB: sisusbvga: Add endpoint checks
media: radio-shark: Add endpoint checks
net: fix skb leak in __skb_tstamp_tx()
selftests: fib_tests: mute cleanup error message
bpf: Fix mask generation for 32-bit narrow loads of 64-bit fields
ipv6: Fix out-of-bounds access in ipv6_find_tlv()
power: supply: leds: Fix blink to LED on transition
power: supply: bq27xxx: Fix bq27xxx_battery_update() race condition
power: supply: bq27xxx: Fix I2C IRQ race on remove
power: supply: bq27xxx: Fix poll_interval handling and races on remove
power: supply: sbs-charger: Fix INHIBITED bit for Status reg
coresight: Fix signedness bug in tmc_etr_buf_insert_barrier_packet()
xen/pvcalls-back: fix double frees with pvcalls_new_active_socket()
x86/show_trace_log_lvl: Ensure stack pointer is aligned, again
ASoC: Intel: Skylake: Fix declaration of enum skl_ch_cfg
forcedeth: Fix an error handling path in nv_probe()
net/mlx5: Fix error message when failing to allocate device memory
net/mlx5: Devcom, fix error flow in mlx5_devcom_register_device
3c589_cs: Fix an error handling path in tc589_probe()
Linux 5.4.244
Change-Id: I056fbc6363372dca786e64c8b6649768e49ee2ed
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit c00bc80462afc7963f449d7f21d896d2f629cacc upstream.
Before this patch bq27xxx_battery_teardown() was setting poll_interval = 0
to avoid bq27xxx_battery_update() requeuing the delayed_work item.
There are 2 problems with this:
1. If the driver is unbound through sysfs, rather then the module being
rmmod-ed, this changes poll_interval unexpectedly
2. This is racy, after it being set poll_interval could be changed
before bq27xxx_battery_update() checks it through
/sys/module/bq27xxx_battery/parameters/poll_interval
Fix this by added a removed attribute to struct bq27xxx_device_info and
using that instead of setting poll_interval to 0.
There also is another poll_interval related race on remove(), writing
/sys/module/bq27xxx_battery/parameters/poll_interval will requeue
the delayed_work item for all devices on the bq27xxx_battery_devices
list and the device being removed was only removed from that list
after cancelling the delayed_work item.
Fix this by moving the removal from the bq27xxx_battery_devices list
to before cancelling the delayed_work item.
Fixes: 8cfaaa8118 ("bq27x00_battery: Fix OOPS caused by unregistring bq27x00 driver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes in 5.4.146
locking/mutex: Fix HANDOFF condition
regmap: fix the offset of register error log
crypto: mxs-dcp - Check for DMA mapping errors
sched/deadline: Fix reset_on_fork reporting of DL tasks
power: supply: axp288_fuel_gauge: Report register-address on readb / writeb errors
crypto: omap-sham - clear dma flags only after omap_sham_update_dma_stop()
sched/deadline: Fix missing clock update in migrate_task_rq_dl()
rcu/tree: Handle VM stoppage in stall detection
posix-cpu-timers: Force next expiration recalc after itimer reset
hrtimer: Avoid double reprogramming in __hrtimer_start_range_ns()
hrtimer: Ensure timerfd notification for HIGHRES=n
udf: Check LVID earlier
udf: Fix iocharset=utf8 mount option
isofs: joliet: Fix iocharset=utf8 mount option
bcache: add proper error unwinding in bcache_device_init
nvme-tcp: don't update queue count when failing to set io queues
nvme-rdma: don't update queue count when failing to set io queues
nvmet: pass back cntlid on successful completion
power: supply: max17042_battery: fix typo in MAx17042_TOFF
s390/cio: add dev_busid sysfs entry for each subchannel
libata: fix ata_host_start()
crypto: qat - do not ignore errors from enable_vf2pf_comms()
crypto: qat - handle both source of interrupt in VF ISR
crypto: qat - fix reuse of completion variable
crypto: qat - fix naming for init/shutdown VF to PF notifications
crypto: qat - do not export adf_iov_putmsg()
fcntl: fix potential deadlock for &fasync_struct.fa_lock
udf_get_extendedattr() had no boundary checks.
s390/kasan: fix large PMD pages address alignment check
s390/debug: fix debug area life cycle
m68k: emu: Fix invalid free in nfeth_cleanup()
sched: Fix UCLAMP_FLAG_IDLE setting
spi: spi-fsl-dspi: Fix issue with uninitialized dma_slave_config
spi: spi-pic32: Fix issue with uninitialized dma_slave_config
genirq/timings: Fix error return code in irq_timings_test_irqs()
lib/mpi: use kcalloc in mpi_resize
clocksource/drivers/sh_cmt: Fix wrong setting if don't request IRQ for clock source channel
block: nbd: add sanity check for first_minor
crypto: qat - use proper type for vf_mask
certs: Trigger creation of RSA module signing key if it's not an RSA key
regulator: vctrl: Use locked regulator_get_voltage in probe path
regulator: vctrl: Avoid lockdep warning in enable/disable ops
spi: sprd: Fix the wrong WDG_LOAD_VAL
spi: spi-zynq-qspi: use wait_for_completion_timeout to make zynq_qspi_exec_mem_op not interruptible
EDAC/i10nm: Fix NVDIMM detection
drm/panfrost: Fix missing clk_disable_unprepare() on error in panfrost_clk_init()
media: TDA1997x: enable EDID support
soc: rockchip: ROCKCHIP_GRF should not default to y, unconditionally
media: cxd2880-spi: Fix an error handling path
bpf: Fix a typo of reuseport map in bpf.h.
bpf: Fix potential memleak and UAF in the verifier.
ARM: dts: aspeed-g6: Fix HVI3C function-group in pinctrl dtsi
arm64: dts: renesas: r8a77995: draak: Remove bogus adv7511w properties
soc: qcom: rpmhpd: Use corner in power_off
media: dvb-usb: fix uninit-value in dvb_usb_adapter_dvb_init
media: dvb-usb: fix uninit-value in vp702x_read_mac_addr
media: dvb-usb: Fix error handling in dvb_usb_i2c_init
media: go7007: remove redundant initialization
media: coda: fix frame_mem_ctrl for YUV420 and YVU420 formats
Bluetooth: sco: prevent information leak in sco_conn_defer_accept()
6lowpan: iphc: Fix an off-by-one check of array index
netns: protect netns ID lookups with RCU
drm/amdgpu/acp: Make PM domain really work
tcp: seq_file: Avoid skipping sk during tcp_seek_last_pos
ARM: dts: meson8: Use a higher default GPU clock frequency
ARM: dts: meson8b: odroidc1: Fix the pwm regulator supply properties
ARM: dts: meson8b: mxq: Fix the pwm regulator supply properties
ARM: dts: meson8b: ec100: Fix the pwm regulator supply properties
net/mlx5e: Prohibit inner indir TIRs in IPoIB
cgroup/cpuset: Fix a partition bug with hotplug
net: cipso: fix warnings in netlbl_cipsov4_add_std
i2c: highlander: add IRQ check
leds: lt3593: Put fwnode in any case during ->probe()
leds: trigger: audio: Add an activate callback to ensure the initial brightness is set
media: em28xx-input: fix refcount bug in em28xx_usb_disconnect
media: venus: venc: Fix potential null pointer dereference on pointer fmt
PCI: PM: Avoid forcing PCI_D0 for wakeup reasons inconsistently
PCI: PM: Enable PME if it can be signaled from D3cold
soc: qcom: smsm: Fix missed interrupts if state changes while masked
debugfs: Return error during {full/open}_proxy_open() on rmmod
Bluetooth: increase BTNAMSIZ to 21 chars to fix potential buffer overflow
PM: EM: Increase energy calculation precision
drm/msm/dpu: make dpu_hw_ctl_clear_all_blendstages clear necessary LMs
arm64: dts: exynos: correct GIC CPU interfaces address range on Exynos7
counter: 104-quad-8: Return error when invalid mode during ceiling_write
Bluetooth: fix repeated calls to sco_sock_kill
drm/msm/dsi: Fix some reference counted resource leaks
usb: gadget: udc: at91: add IRQ check
usb: phy: fsl-usb: add IRQ check
usb: phy: twl6030: add IRQ checks
usb: gadget: udc: renesas_usb3: Fix soc_device_match() abuse
Bluetooth: Move shutdown callback before flushing tx and rx queue
usb: host: ohci-tmio: add IRQ check
usb: phy: tahvo: add IRQ check
mac80211: Fix insufficient headroom issue for AMSDU
lockd: Fix invalid lockowner cast after vfs_test_lock
nfsd4: Fix forced-expiry locking
usb: gadget: mv_u3d: request_irq() after initializing UDC
mm/swap: consider max pages in iomap_swapfile_add_extent
Bluetooth: add timeout sanity check to hci_inquiry
i2c: iop3xx: fix deferred probing
i2c: s3c2410: fix IRQ check
rsi: fix error code in rsi_load_9116_firmware()
rsi: fix an error code in rsi_probe()
ASoC: Intel: Skylake: Leave data as is when invoking TLV IPCs
ASoC: Intel: Skylake: Fix module resource and format selection
mmc: dw_mmc: Fix issue with uninitialized dma_slave_config
mmc: moxart: Fix issue with uninitialized dma_slave_config
bpf: Fix possible out of bound write in narrow load handling
CIFS: Fix a potencially linear read overflow
i2c: mt65xx: fix IRQ check
usb: ehci-orion: Handle errors of clk_prepare_enable() in probe
usb: bdc: Fix an error handling path in 'bdc_probe()' when no suitable DMA config is available
tty: serial: fsl_lpuart: fix the wrong mapbase value
ASoC: wcd9335: Fix a double irq free in the remove function
ASoC: wcd9335: Fix a memory leak in the error handling path of the probe function
ASoC: wcd9335: Disable irq on slave ports in the remove function
ath6kl: wmi: fix an error code in ath6kl_wmi_sync_point()
bcma: Fix memory leak for internally-handled cores
brcmfmac: pcie: fix oops on failure to resume and reprobe
ipv6: make exception cache less predictible
ipv4: make exception cache less predictible
net: sched: Fix qdisc_rate_table refcount leak when get tcf_block failed
net: qualcomm: fix QCA7000 checksum handling
octeontx2-af: Fix loop in free and unmap counter
ipv4: fix endianness issue in inet_rtm_getroute_build_skb()
bpf: Introduce BPF nospec instruction for mitigating Spectre v4
bpf: Fix leakage due to insufficient speculative store bypass mitigation
bpf: verifier: Allocate idmap scratch in verifier env
bpf: Fix pointer arithmetic mask tightening under state pruning
time: Handle negative seconds correctly in timespec64_to_ns()
tty: Fix data race between tiocsti() and flush_to_ldisc()
perf/x86/amd/ibs: Extend PERF_PMU_CAP_NO_EXCLUDE to IBS Op
x86/resctrl: Fix a maybe-uninitialized build warning treated as error
KVM: s390: index kvm->arch.idle_mask by vcpu_idx
KVM: x86: Update vCPU's hv_clock before back to guest when tsc_offset is adjusted
KVM: nVMX: Unconditionally clear nested.pi_pending on nested VM-Enter
fuse: truncate pagecache on atomic_o_trunc
fuse: flush extending writes
IMA: remove -Wmissing-prototypes warning
IMA: remove the dependency on CRYPTO_MD5
fbmem: don't allow too huge resolutions
backlight: pwm_bl: Improve bootloader/kernel device handover
clk: kirkwood: Fix a clocking boot regression
Linux 5.4.146
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I5524baa0c07d9d9b80c0736488e3ea0e4fb8e335
Changes in 5.4.118
s390/disassembler: increase ebpf disasm buffer size
ACPI: custom_method: fix potential use-after-free issue
ACPI: custom_method: fix a possible memory leak
ftrace: Handle commands when closing set_ftrace_filter file
ARM: 9056/1: decompressor: fix BSS size calculation for LLVM ld.lld
arm64: dts: marvell: armada-37xx: add syscon compatible to NB clk node
arm64: dts: mt8173: fix property typo of 'phys' in dsi node
ecryptfs: fix kernel panic with null dev_name
mtd: spinand: core: add missing MODULE_DEVICE_TABLE()
mtd: rawnand: atmel: Update ecc_stats.corrected counter
erofs: add unsupported inode i_format check
spi: spi-ti-qspi: Free DMA resources
scsi: qla2xxx: Fix crash in qla2xxx_mqueuecommand()
scsi: mpt3sas: Block PCI config access from userspace during reset
mmc: uniphier-sd: Fix an error handling path in uniphier_sd_probe()
mmc: uniphier-sd: Fix a resource leak in the remove function
mmc: sdhci: Check for reset prior to DMA address unmap
mmc: sdhci-pci: Fix initialization of some SD cards for Intel BYT-based controllers
mmc: block: Update ext_csd.cache_ctrl if it was written
mmc: block: Issue a cache flush only when it's enabled
mmc: core: Do a power cycle when the CMD11 fails
mmc: core: Set read only for SD cards with permanent write protect bit
mmc: core: Fix hanging on I/O during system suspend for removable cards
modules: mark ref_module static
modules: mark find_symbol static
modules: mark each_symbol_section static
modules: unexport __module_text_address
modules: unexport __module_address
modules: rename the licence field in struct symsearch to license
modules: return licensing information from find_symbol
modules: inherit TAINT_PROPRIETARY_MODULE
irqchip/gic-v3: Do not enable irqs when handling spurious interrups
cifs: Return correct error code from smb2_get_enc_key
btrfs: fix metadata extent leak after failure to create subvolume
intel_th: pci: Add Rocket Lake CPU support
posix-timers: Preserve return value in clock_adjtime32()
fbdev: zero-fill colormap in fbcmap.c
bus: ti-sysc: Probe for l4_wkup and l4_cfg interconnect devices first
staging: wimax/i2400m: fix byte-order issue
spi: ath79: always call chipselect function
spi: ath79: remove spi-master setup and cleanup assignment
crypto: api - check for ERR pointers in crypto_destroy_tfm()
crypto: qat - fix unmap invalid dma address
usb: gadget: uvc: add bInterval checking for HS mode
usb: webcam: Invalid size of Processing Unit Descriptor
genirq/matrix: Prevent allocation counter corruption
usb: gadget: f_uac2: validate input parameters
usb: gadget: f_uac1: validate input parameters
usb: dwc3: gadget: Ignore EP queue requests during bus reset
usb: xhci: Fix port minor revision
PCI: PM: Do not read power state in pci_enable_device_flags()
x86/build: Propagate $(CLANG_FLAGS) to $(REALMODE_FLAGS)
tee: optee: do not check memref size on return from Secure World
perf/arm_pmu_platform: Fix error handling
usb: xhci-mtk: support quirk to disable usb2 lpm
xhci: check control context is valid before dereferencing it.
xhci: fix potential array out of bounds with several interrupters
spi: dln2: Fix reference leak to master
spi: omap-100k: Fix reference leak to master
spi: qup: fix PM reference leak in spi_qup_remove()
usb: musb: fix PM reference leak in musb_irq_work()
usb: core: hub: Fix PM reference leak in usb_port_resume()
tty: n_gsm: check error while registering tty devices
intel_th: Consistency and off-by-one fix
phy: phy-twl4030-usb: Fix possible use-after-free in twl4030_usb_remove()
crypto: stm32/hash - Fix PM reference leak on stm32-hash.c
crypto: stm32/cryp - Fix PM reference leak on stm32-cryp.c
crypto: omap-aes - Fix PM reference leak on omap-aes.c
platform/x86: intel_pmc_core: Don't use global pmcdev in quirks
btrfs: convert logic BUG_ON()'s in replace_path to ASSERT()'s
drm: Added orientation quirk for OneGX1 Pro
drm/qxl: release shadow on shutdown
drm/amd/display: Check for DSC support instead of ASIC revision
drm/amd/display: Don't optimize bandwidth before disabling planes
scsi: lpfc: Fix incorrect dbde assignment when building target abts wqe
scsi: lpfc: Fix pt2pt connection does not recover after LOGO
scsi: target: pscsi: Fix warning in pscsi_complete_cmd()
media: ite-cir: check for receive overflow
media: drivers: media: pci: sta2x11: fix Kconfig dependency on GPIOLIB
media: imx: capture: Return -EPIPE from __capture_legacy_try_fmt()
power: supply: bq27xxx: fix power_avg for newer ICs
extcon: arizona: Fix some issues when HPDET IRQ fires after the jack has been unplugged
extcon: arizona: Fix various races on driver unbind
media: media/saa7164: fix saa7164_encoder_register() memory leak bugs
media: gspca/sq905.c: fix uninitialized variable
power: supply: Use IRQF_ONESHOT
drm/amdgpu: mask the xgmi number of hops reported from psp to kfd
drm/amdkfd: Fix UBSAN shift-out-of-bounds warning
drm/amdgpu : Fix asic reset regression issue introduce by 8f211fe8ac7c4f
drm/amd/display: Fix UBSAN warning for not a valid value for type '_Bool'
drm/amd/display: fix dml prefetch validation
scsi: qla2xxx: Always check the return value of qla24xx_get_isp_stats()
drm/vkms: fix misuse of WARN_ON
scsi: qla2xxx: Fix use after free in bsg
mmc: sdhci-pci: Add PCI IDs for Intel LKF
ata: ahci: Disable SXS for Hisilicon Kunpeng920
scsi: smartpqi: Correct request leakage during reset operations
scsi: smartpqi: Add new PCI IDs
scsi: scsi_dh_alua: Remove check for ASC 24h in alua_rtpg()
media: em28xx: fix memory leak
media: vivid: update EDID
clk: socfpga: arria10: Fix memory leak of socfpga_clk on error return
power: supply: generic-adc-battery: fix possible use-after-free in gab_remove()
power: supply: s3c_adc_battery: fix possible use-after-free in s3c_adc_bat_remove()
media: tc358743: fix possible use-after-free in tc358743_remove()
media: adv7604: fix possible use-after-free in adv76xx_remove()
media: i2c: adv7511-v4l2: fix possible use-after-free in adv7511_remove()
media: i2c: tda1997: Fix possible use-after-free in tda1997x_remove()
media: i2c: adv7842: fix possible use-after-free in adv7842_remove()
media: platform: sti: Fix runtime PM imbalance in regs_show
media: dvb-usb: fix memory leak in dvb_usb_adapter_init
media: gscpa/stv06xx: fix memory leak
sched/fair: Ignore percpu threads for imbalance pulls
drm/msm/mdp5: Configure PP_SYNC_HEIGHT to double the vtotal
drm/msm/mdp5: Do not multiply vclk line count by 100
drm/amdkfd: Fix cat debugfs hang_hws file causes system crash bug
amdgpu: avoid incorrect %hu format string
drm/amdgpu: fix NULL pointer dereference
scsi: lpfc: Fix crash when a REG_RPI mailbox fails triggering a LOGO response
scsi: lpfc: Fix error handling for mailboxes completed in MBX_POLL mode
scsi: lpfc: Remove unsupported mbox PORT_CAPABILITIES logic
mfd: arizona: Fix rumtime PM imbalance on error
scsi: libfc: Fix a format specifier
s390/archrandom: add parameter check for s390_arch_random_generate
ALSA: emu8000: Fix a use after free in snd_emu8000_create_mixer
ALSA: hda/conexant: Re-order CX5066 quirk table entries
ALSA: sb: Fix two use after free in snd_sb_qsound_build
ALSA: usb-audio: Explicitly set up the clock selector
ALSA: usb-audio: More constifications
ALSA: usb-audio: Add dB range mapping for Sennheiser Communications Headset PC 8
ALSA: hda/realtek: GA503 use same quirks as GA401
ALSA: hda/realtek: fix mic boost on Intel NUC 8
ALSA: hda/realtek: fix static noise on ALC285 Lenovo laptops
ALSA: hda/realtek: Add quirk for Intel Clevo PCx0Dx
btrfs: fix race when picking most recent mod log operation for an old root
arm64/vdso: Discard .note.gnu.property sections in vDSO
Makefile: Move -Wno-unused-but-set-variable out of GCC only block
virtiofs: fix memory leak in virtio_fs_probe()
ubifs: Only check replay with inode type to judge if inode linked
f2fs: fix to avoid out-of-bounds memory access
mlxsw: spectrum_mr: Update egress RIF list before route's action
openvswitch: fix stack OOB read while fragmenting IPv4 packets
ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure
NFS: Don't discard pNFS layout segments that are marked for return
NFSv4: Don't discard segments marked for return in _pnfs_return_layout()
Input: ili210x - add missing negation for touch indication on ili210x
jffs2: Fix kasan slab-out-of-bounds problem
powerpc/eeh: Fix EEH handling for hugepages in ioremap space.
powerpc: fix EDEADLOCK redefinition error in uapi/asm/errno.h
intel_th: pci: Add Alder Lake-M support
tpm: efi: Use local variable for calculating final log size
tpm: vtpm_proxy: Avoid reading host log when using a virtual device
crypto: rng - fix crypto_rng_reset() refcounting when !CRYPTO_STATS
md/raid1: properly indicate failure when ending a failed write request
dm raid: fix inconclusive reshape layout on fast raid4/5/6 table reload sequences
fuse: fix write deadlock
security: commoncap: fix -Wstringop-overread warning
Fix misc new gcc warnings
jffs2: check the validity of dstlen in jffs2_zlib_compress()
Revert 337f13046f ("futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT op")
x86/cpu: Initialize MSR_TSC_AUX if RDTSCP *or* RDPID is supported
kbuild: update config_data.gz only when the content of .config is changed
ext4: fix check to prevent false positive report of incorrect used inodes
ext4: do not set SB_ACTIVE in ext4_orphan_cleanup()
ext4: fix error code in ext4_commit_super
media: dvbdev: Fix memory leak in dvb_media_device_free()
media: dvb-usb: Fix use-after-free access
media: dvb-usb: Fix memory leak at error in dvb_usb_device_init()
media: staging/intel-ipu3: Fix memory leak in imu_fmt
media: staging/intel-ipu3: Fix set_fmt error handling
media: staging/intel-ipu3: Fix race condition during set_fmt
usb: gadget: dummy_hcd: fix gpf in gadget_setup
usb: gadget: Fix double free of device descriptor pointers
usb: gadget/function/f_fs string table fix for multiple languages
usb: dwc3: gadget: Fix START_TRANSFER link state check
usb: dwc2: Fix session request interrupt handler
tty: fix memory leak in vc_deallocate
rsi: Use resume_noirq for SDIO
tracing: Map all PIDs to command lines
tracing: Restructure trace_clock_global() to never block
dm persistent data: packed struct should have an aligned() attribute too
dm space map common: fix division bug in sm_ll_find_free_block()
dm integrity: fix missing goto in bitmap_flush_interval error handling
dm rq: fix double free of blk_mq_tag_set in dev remove after table load fails
Linux 5.4.118
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I3df43f7c0e3684387c20a29934bcdd9bcdf71f0e
[ Upstream commit c4d57c22ac65bd503716062a06fad55a01569cac ]
On all newer bq27xxx ICs, the AveragePower register contains a signed
value; in addition to handling the raw value as unsigned, the driver
code also didn't convert it to µW as expected.
At least for the BQ28Z610, the reference manual incorrectly states that
the value is in units of 1mW and not 10mW. I have no way of knowing
whether the manuals of other supported ICs contain the same error, or if
there are models that actually use 1mW. At least, the new code shouldn't
be *less* correct than the old version for any device.
power_avg is removed from the cache structure, se we don't have to
extend it to store both a signed value and an error code. Always getting
an up-to-date value may be desirable anyways, as it avoids inconsistent
current and power readings when switching between charging and
discharging.
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2079fe6ea8cbd2fb2fbadba911f1eca6c362eb9b ]
The omap_sr_pdata is not declared but is exported, so add a
define for it to fix the following warning:
arch/arm/mach-omap2/pdata-quirks.c:609:36: warning: symbol 'omap_sr_pdata' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1334 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version you should have received a copy of the
gnu general public license along with this program if not write to
the free software foundation inc 675 mass ave cambridge ma 02139 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 35 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.655028468@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
51 franklin street fifth floor boston ma 02110 1301 usa
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option [no]_[pad]_[ctrl] any later version this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 51 franklin street fifth floor boston ma
02110 1301 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 176 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154040.652910950@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This migrates isp1704 driver from old GPIO API to new descriptor
based GPIO API and drops useless platform data as a side-effect.
Migration is simple, since all mainline users are DT based and
DT API does not change. Out of tree users of the platform data
need to migrate to gpiod_lookup_table as described here:
Documentation/driver-api/gpio/board.rst
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Pull power supply and reset updates from Sebastian Reichel:
- New core support:
- battery internal resistance
- battery OCV capacity lookup table
- support for custom sysfs attributes
- Convert all drivers to use power-supply core support for custom sysfs
attributes
- bq24190-charger: bq24196 support
- axp20x-charger: AXP813 support
- sc27xx-battery: new fuel gauge driver
- gpio-poweroff: support for specific active and inactive delays
- Misc fixes
* tag 'for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (53 commits)
power: supply: bq25890: fix BAT_COMP field definition
power: supply: gpio-charger: Do not use deprecated POWER_SUPPLY_TYPE_USB_*
power: supply: ds2781: switch to devm_power_supply_register
power: supply: ds2780: switch to devm_power_supply_register
power: supply: ds2781: fix race-condition in bin attribute registration
power: supply: ds2780: fix race-condition in bin attribute registration
power: supply: pcf50633: fix race-condition in sysfs registration
power: supply: charger-manager: fix race-condition in sysfs registration
power: supply: charger-manager: simplify generation of sysfs attribute group name
power: supply: bq24257: fix race-condition in sysfs registration
power: supply: bq24190_charger: fix race-condition in sysfs registration
power: supply: lp8788: fix race-condition in sysfs registration
power: supply: ds2781: fix race-condition in sysfs registration
power: supply: ds2780: fix race-condition in sysfs registration
power: supply: bq2415x: fix race-condition in sysfs registration
power: supply: core: add support for custom sysfs attributes
power: supply: sc27xx: Save last battery capacity
power: reset: at91-poweroff: move shdwc related data to one structure
power: supply: sc27xx: Add suspend/resume interfaces
power: supply: sc27xx: Add fuel gauge low voltage alarm
...
This registers custom sysfs properties using the native functionality
of the power-supply framework, which cleans up the code a bit and
fixes a race-condition. Before this patch the sysfs attributes were
not properly registered to udev.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
omap_sr_register_pmic() was introduced in 2010 in commit
984aa6dbf4 ("OMAP3: PM: Adding smartreflex driver support.")
. There was never any caller of this function in mainline resulting in a
warning
sr_init: No PMIC hook to init smartreflex
for each machine where this driver is enabled. So remove the unused
function and the pr_warn.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This device is software similar to the BQ27426 except it has
different data memory offsets. Add support here.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
We are still initializing smartreflex with platform data using
omap_device_build(). We can instead pass the platform data in
with auxdata in pdata-quirks.c and make the driver use that
in later patches.
Note that we cannot enable the auxdata use yet, this is done
in the last patch of the series.
Signed-off-by: Tony Lindgren <tony@atomide.com>
This adds basic support for BQ27521 battery monitor, used in Nokia N9
and N950. In particular, battery voltage is important to be able to
tell when the battery is almost empty. Emptying battery on N950 is
pretty painful, as flasher needs to be used to recover phone in such case.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Andrew F. Davis <afd@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Register the 5V boost converter as a regulator named "usb_otg_vbus".
This commit also adds support for bq24190_platform_data, through which
non device-tree platforms can pass the regulator_init_data (containing
mappings for the consumer amongst other things).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Support data memory update on BQ27425. Parameters from TI datasheets are also
provided for BQ27500, 545, 421, 441, 621; however these are commented out,
as they are not tested.
Add BQ27XXX_O_CFGUP & _O_RAM for use in bq27xxx_chip_data[n].opts
and by data memory update functions.
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
For the existing features, these chips act like others already ID'd,
so they had false but functional IDs. We will be adding features
which require correct IDs, so the following IDs are added:
BQ2752X, 531, 542, 546, 742, 425, 441, 621
Chip-specific features are now tracked by BQ27XXX_O_* flags in di->opts.
No functional changes to the driver.
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
When the BQ27xxx driver was originally written the w1 subsystem only
allowed device drivers for w1 attached devices to live in the w1
subsystem. Kernel driver subsystems expect that the driver for a device
live in the directory of the subsystem for which it implements
functionality, not in the directory of the bus that it is attached. To
work around this, the BQ27xxx driver was implemented as a platform device
driver and the interface driver would instantiate this device from within
the w1 directory, then pass a w1 read callback as platform data.
As we can now have the w1 interface driver in the power/supply directory
(like we do already with the i2c interface driver) we can remove this
middle-layer platform driver.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Previously there was no way to configure these chips in the event that the
defaults didn't match the battery in question.
For chips with RAM data memory (and also those with flash/NVM data memory
if CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is defined and the user has not
set module param dt_monitored_battery_updates_nvm=0) we now call
power_supply_get_battery_info(), check its values, and write battery
properties to chip data memory if there is a dm_regs table for the chip.
Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Add these to enable read/write of chip data memory RAM/NVM/flash:
bq27xxx_battery_seal()
bq27xxx_battery_unseal()
bq27xxx_battery_set_cfgupdate()
bq27xxx_battery_soft_reset()
bq27xxx_battery_read_dm_block()
bq27xxx_battery_write_dm_block()
bq27xxx_battery_checksum_dm_block()
Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Declare bus.write/read_bulk/write_bulk().
Add I2C write/read_bulk/write_bulk() to implement the above.
Add bq27xxx_write/read_block/write_block() helpers to call the above.
Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
Signed-off-by: Liam Breck <kernel@networkimprov.net>
Acked-by: "Andrew F. Davis" <afd@ti.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Userspace prefers the driver having a status property over having to guess
itself. Specifically this will properly make the GNOME3 UI (and likely
others) properly show discharging / charging / full status, instead
of always showing discharging as status.
Note that in the case there is no charger driver supplying the max17042,
then a status of unknown will get returned. At least upower treats
this the same as not having a status attribute, so in this case nothing
changes from a userspace pov.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Some x86 machines use a max17047 fuel-gauge and x86 might be missing
platform_data if not provided by SFI.
This commit adds default platform_data as fallback option so that the
driver can work on boards where no platform_data is provided.
Since not all boards have a thermistor hooked up, set temp_min to 0 and
change the health checks from temp <= temp_min to temp < temp_min to
not trigger on such boards (where temp reads 0).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
The i2c-core already maps of irqs before calling the driver's probe
function and there are no in tree users of
bq24190_platform_data->gpio_int.
Remove the redundant custom irq-mapping code and just use client->irq.
Cc: Liam Breck <kernel@networkimprov.net>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
This commit adds the BQ27520G4 chip definition to specifically match the
bq27520-G4 functionality as described in the datasheet.
Signed-off-by: Chris Lapa <chris@lapa.com.au>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
This commit adds the BQ27520G3 chip definition to specifically match the
bq27520-G3 functionality as described in the datasheet.
Signed-off-by: Chris Lapa <chris@lapa.com.au>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
This commit adds the BQ27520G2 chip definition to specifically match the
bq27520-G2 functionality as described in the datasheet.
Signed-off-by: Chris Lapa <chris@lapa.com.au>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
This commit adds the BQ27520G1 chip definition to specifically match the
bq27520-G1 functionality as described in the datasheet.
Signed-off-by: Chris Lapa <chris@lapa.com.au>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
This commit adds the BQ27510G3 chip definition to specifically match the
bq27510-G3 functionality as described in the datasheet.
Signed-off-by: Chris Lapa <chris@lapa.com.au>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Andrew F. Davis <afd@ti.com>
Tested-by: Chris Lapa <chris@lapa.com.au>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
This commit adds the BQ27510G2 chip definition to specifically match the
bq27510-G2 functionality as described in the datasheet.
Signed-off-by: Chris Lapa <chris@lapa.com.au>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
This commit adds the BQ27510G1 chip definition to specifically match the
bq27510-G1 functionality as described in the datasheet.
Signed-off-by: Chris Lapa <chris@lapa.com.au>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
This commit adds the BQ27500 chip definition to specifically match the
bq27500/1 functionality as described in the datasheet.
Signed-off-by: Chris Lapa <chris@lapa.com.au>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
The BQ2751X definition exists only to satisfy backwards compatibility.
Signed-off-by: Chris Lapa <chris@lapa.com.au>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
The BQ2750X definition exists only to satisfy backwards compatibility.
Signed-off-by: Chris Lapa <chris@lapa.com.au>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
The BQ27510 and BQ27520 use a slightly different register map than the
BQ27500, add a new type enum and add these gauges to it.
Fixes: d74534c277 ("power: bq27xxx_battery: Add support for additional bq27xxx family devices")
Based-on-patch-by: Kenneth R. Crudup <kenny@panix.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
There where still a few lingering references to pdata after commit
power: supply: sbs-battery: simplify DT parsing.
Remove pdata from struct·sbs_info and conditional checks to ser if this
was set from the i2c read / write functions.
Instead of call max in each function for incrementing poll_retry_count
do it once in the probe function.
Fixup null pointer dereference in to pdata in sbs_external_power_changed.
Change retry counts to u32 to avoid need for max.
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
This requests the status GPIO with initial input setup. It is required
to read the GPIO status at probe time and thus correctly avoid sending
I2C messages when AC is not plugged.
When requesting the GPIO without initial input setup, it always reads 0
which causes probe to fail as it assumes the charger is connected, sends
I2C messages and fails.
While at it, this switches the driver over to gpiod API.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Switch to using new gpio_desc interface and devm gpio get calls to
automatically manage gpio resource. Use gpiod_get_value which handles
active high / low calls.
If gpio_detect is set then force loading of the driver as it is
reasonable to assume that the battery may not be present.
Update the is_present flag immediately in the IRQ.
Remove legacy gpio specification from platform data.
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
The max8903_charger.h file indicated that dcm and dok were not optional
when dc_valid is set.
It makes sense to have dok as a compulsory pin when dc_valid is given.
However dcm can be optionally wired to a fixed level especially when the
circuit is configured for dc power exclusively.
The previous implementation already allowed for this somewhat, however no
error was given if dok wasn't given whilst dc_valid was.
The new implementation enforces dok presence when dc_valid is given. Whilst
allowing dcm to be optional.
Signed-off-by: Chris Lapa <chris@lapa.com.au>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
