Changes in 4.14.317
power: supply: bq27xxx: After charger plug in/out wait 0.5s for things to stabilize
ASoC: Intel: Skylake: Fix declaration of enum skl_ch_cfg
bluetooth: Add cmd validity checks at the start of hci_sock_ioctl()
dmaengine: pl330: rename _start to prevent build error
netrom: fix info-leak in nr_write_internal()
af_packet: Fix data-races of pkt_sk(sk)->num.
af_packet: do not use READ_ONCE() in packet_bind()
tcp: Return user_mss for TCP_MAXSEG in CLOSE/LISTEN state if user_mss set
udp6: Fix race condition in udp6_sendmsg & connect
net: dsa: mv88e6xxx: Increase wait after reset deactivation
mailbox: mailbox-test: Fix potential double-free in mbox_test_message_write()
ARM: 9295/1: unwind:fix unwind abort for uleb128 case
fbdev: modedb: Add 1920x1080 at 60 Hz video mode
fbdev: stifb: Fix info entry in sti_struct on error path
nbd: Fix debugfs_create_dir error checking
ASoC: dwc: limit the number of overrun messages
ASoC: ssm2602: Add workaround for playback distortions
media: dvb-usb: az6027: fix three null-ptr-deref in az6027_i2c_xfer()
media: dvb-usb-v2: ec168: fix null-ptr-deref in ec168_i2c_xfer()
media: dvb-usb-v2: ce6230: fix null-ptr-deref in ce6230_i2c_master_xfer()
media: dvb-usb-v2: rtl28xxu: fix null-ptr-deref in rtl28xxu_i2c_xfer
media: dvb-usb: digitv: fix null-ptr-deref in digitv_i2c_xfer()
media: dvb-usb: dw2102: fix uninit-value in su3000_read_mac_address
media: netup_unidvb: fix irq init by register it at the end of probe
media: ttusb-dec: fix memory leak in ttusb_dec_exit_dvb()
media: dvb-core: Fix kernel WARNING for blocking operation in wait_event*()
media: dvb-core: Fix use-after-free due to race condition at dvb_ca_en50221
wifi: rtl8xxxu: fix authentication timeout due to incorrect RCR value
scsi: core: Decrease scsi_device's iorequest_cnt if dispatch failed
wifi: b43: fix incorrect __packed annotation
netfilter: conntrack: define variables exp_nat_nla_policy and any_addr with CONFIG_NF_NAT
ALSA: oss: avoid missing-prototype warnings
atm: hide unused procfs functions
mailbox: mailbox-test: fix a locking issue in mbox_test_message_write()
iio: adc: mxs-lradc: fix the order of two cleanup operations
HID: wacom: avoid integer overflow in wacom_intuos_inout()
iio: dac: mcp4725: Fix i2c_master_send() return value handling
net: usb: qmi_wwan: Set DTR quirk for BroadMobi BM818
usb: gadget: f_fs: Add unbind event before functionfs_unbind
scsi: stex: Fix gcc 13 warnings
ata: libata-scsi: Use correct device no in ata_find_dev()
x86/boot: Wrap literal addresses in absolute_pointer()
ACPI: thermal: drop an always true check
gcc-12: disable '-Wdangling-pointer' warning for now
eth: sun: cassini: remove dead code
kernel/extable.c: use address-of operator on section symbols
lib/dynamic_debug.c: use address-of operator on section symbols
wifi: rtlwifi: remove always-true condition pointed out by GCC 12
regulator: da905{2,5}: Remove unnecessary array check
mmc: vub300: fix invalid response handling
tty: serial: fsl_lpuart: use UARTCTRL_TXINV to send break instead of UARTCTRL_SBK
selinux: don't use make's grouped targets feature yet
ext4: add lockdep annotations for i_data_sem for ea_inode's
fbcon: Fix null-ptr-deref in soft_cursor
scsi: dpt_i2o: Remove broken pass-through ioctl (I2OUSERCMD)
scsi: dpt_i2o: Do not process completions with invalid addresses
cdc_ncm: Implement the 32-bit version of NCM Transfer Block
cdc_ncm: Fix the build warning
net: cdc_ncm: Deal with too low values of dwNtbOutMaxSize
Fix double fget() in vhost_net_set_backend()
wifi: rtlwifi: 8192de: correct checking of IQK reload
Linux 4.14.317
Change-Id: Ief316a58787d01cb8e01710fbb9c4d2b70ad3c1b
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Changes in 4.14.296
uas: add no-uas quirk for Hiksemi usb_disk
usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS
uas: ignore UAS for Thinkplus chips
net: usb: qmi_wwan: Add new usb-id for Dell branded EM7455
ntfs: fix BUG_ON in ntfs_lookup_inode_by_name()
mmc: moxart: fix 4-bit bus width and remove 8-bit bus width
mm/page_alloc: fix race condition between build_all_zonelists and page allocation
mm: prevent page_frag_alloc() from corrupting the memory
mm/migrate_device.c: flush TLB while holding PTL
soc: sunxi: sram: Actually claim SRAM regions
soc: sunxi: sram: Fix debugfs info for A64 SRAM C
Revert "drm: bridge: analogix/dp: add panel prepare/unprepare in suspend/resume time"
Input: melfas_mip4 - fix return value check in mip4_probe()
usbnet: Fix memory leak in usbnet_disconnect()
nvme: add new line after variable declatation
nvme: Fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices
selftests: Fix the if conditions of in test_extra_filter()
clk: iproc: Minor tidy up of iproc pll data structures
clk: iproc: Do not rely on node name for correct PLL setup
Makefile.extrawarn: Move -Wcast-function-type-strict to W=1
i2c: dev: prevent ZERO_SIZE_PTR deref in i2cdev_ioctl_rdwr()
ARM: fix function graph tracer and unwinder dependencies
fs: fix UAF/GPF bug in nilfs_mdt_destroy
dmaengine: xilinx_dma: cleanup for fetching xlnx,num-fstores property
dmaengine: xilinx_dma: Report error in case of dma_set_mask_and_coherent API failure
ARM: dts: fix Moxa SDIO 'compatible', remove 'sdhci' misnomer
net/ieee802154: fix uninit value bug in dgram_sendmsg
um: Cleanup syscall_handler_t cast in syscalls_32.h
um: Cleanup compiler warning in arch/x86/um/tls_32.c
usb: mon: make mmapped memory read only
USB: serial: ftdi_sio: fix 300 bps rate for SIO
mmc: core: Replace with already defined values for readability
mmc: core: Terminate infinite loop in SD-UHS voltage switch
rpmsg: qcom: glink: replace strncpy() with strscpy_pad()
netfilter: nf_queue: fix socket leak
nilfs2: fix NULL pointer dereference at nilfs_bmap_lookup_at_level()
nilfs2: fix leak of nilfs_root in case of writer thread creation failure
nilfs2: replace WARN_ONs by nilfs_error for checkpoint acquisition failure
ceph: don't truncate file in atomic_open
random: clamp credited irq bits to maximum mixed
ALSA: hda: Fix position reporting on Poulsbo
scsi: stex: Properly zero out the passthrough command structure
USB: serial: qcserial: add new usb-id for Dell branded EM7455
random: restore O_NONBLOCK support
random: avoid reading two cache lines on irq randomness
wifi: mac80211_hwsim: avoid mac80211 warning on bad rate
Input: xpad - add supported devices as contributed on github
Input: xpad - fix wireless 360 controller breaking after suspend
random: use expired timer rather than wq for mixing fast pool
ALSA: oss: Fix potential deadlock at unregistration
ALSA: rawmidi: Drop register_mutex in snd_rawmidi_free()
ALSA: usb-audio: Fix potential memory leaks
ALSA: usb-audio: Fix NULL dererence at error path
iio: dac: ad5593r: Fix i2c read protocol requirements
fs: dlm: fix race between test_bit() and queue_work()
fs: dlm: handle -EBUSY first in lock arg validation
HID: multitouch: Add memory barriers
quota: Check next/prev free block number after reading from quota file
regulator: qcom_rpm: Fix circular deferral regression
Revert "fs: check FMODE_LSEEK to control internal pipe splicing"
parisc: fbdev/stifb: Align graphics memory size to 4MB
UM: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
PCI: Sanitise firmware BAR assignments behind a PCI-PCI bridge
fbdev: smscufx: Fix use-after-free in ufx_ops_open()
nilfs2: fix use-after-free bug of struct nilfs_root
nilfs2: fix lockdep warnings in page operations for btree nodes
nilfs2: fix lockdep warnings during disk space reclamation
ext4: avoid crash when inline data creation follows DIO write
ext4: fix null-ptr-deref in ext4_write_info
ext4: make ext4_lazyinit_thread freezable
ext4: place buffer head allocation before handle start
livepatch: fix race between fork and KLP transition
ftrace: Properly unset FTRACE_HASH_FL_MOD
ring-buffer: Allow splice to read previous partially read pages
ring-buffer: Check pending waiters when doing wake ups as well
ring-buffer: Fix race between reset page and reading page
KVM: x86/emulator: Fix handing of POP SS to correctly set interruptibility
KVM: nVMX: Unconditionally purge queued/injected events on nested "exit"
gcov: support GCC 12.1 and newer compilers
selinux: use "grep -E" instead of "egrep"
sh: machvec: Use char[] for section boundaries
wifi: ath10k: add peer map clean up for peer delete in ath10k_sta_state()
wifi: mac80211: allow bw change during channel switch in mesh
wifi: rtl8xxxu: tighten bounds checking in rtl8xxxu_read_efuse()
spi: qup: add missing clk_disable_unprepare on error in spi_qup_resume()
spi: qup: add missing clk_disable_unprepare on error in spi_qup_pm_resume_runtime()
wifi: rtl8xxxu: Fix skb misuse in TX queue selection
wifi: rtl8xxxu: gen2: Fix mistake in path B IQ calibration
net: fs_enet: Fix wrong check in do_pd_setup
spi/omap100k:Fix PM disable depth imbalance in omap1_spi100k_probe
netfilter: nft_fib: Fix for rpath check with VRF devices
spi: s3c64xx: Fix large transfers with DMA
vhost/vsock: Use kvmalloc/kvfree for larger packets.
mISDN: fix use-after-free bugs in l1oip timer handlers
tcp: fix tcp_cwnd_validate() to not forget is_cwnd_limited
net: rds: don't hold sock lock when cancelling work from rds_tcp_reset_callbacks()
bnx2x: fix potential memory leak in bnx2x_tpa_stop()
drm/mipi-dsi: Detach devices when removing the host
platform/x86: msi-laptop: Fix old-ec check for backlight registering
platform/x86: msi-laptop: Fix resource cleanup
drm/bridge: megachips: Fix a null pointer dereference bug
mmc: au1xmmc: Fix an error handling path in au1xmmc_probe()
ASoC: eureka-tlv320: Hold reference returned from of_find_xxx API
ALSA: dmaengine: increment buffer pointer atomically
mmc: wmt-sdmmc: Fix an error handling path in wmt_mci_probe()
memory: of: Fix refcount leak bug in of_get_ddr_timings()
soc: qcom: smsm: Fix refcount leak bugs in qcom_smsm_probe()
soc: qcom: smem_state: Add refcounting for the 'state->of_node'
ARM: dts: turris-omnia: Fix mpp26 pin name and comment
ARM: dts: kirkwood: lsxl: fix serial line
ARM: dts: kirkwood: lsxl: remove first ethernet port
ARM: Drop CMDLINE_* dependency on ATAGS
ARM: dts: exynos: fix polarity of VBUS GPIO of Origen
iio: adc: at91-sama5d2_adc: fix AT91_SAMA5D2_MR_TRACKTIM_MAX
iio: inkern: only release the device node when done with it
iio: ABI: Fix wrong format of differential capacitance channel ABI.
clk: oxnas: Hold reference returned by of_get_parent()
clk: tegra: Fix refcount leak in tegra210_clock_init
clk: tegra: Fix refcount leak in tegra114_clock_init
clk: tegra20: Fix refcount leak in tegra20_clock_init
HSI: omap_ssi: Fix refcount leak in ssi_probe
HSI: omap_ssi_port: Fix dma_map_sg error check
media: exynos4-is: fimc-is: Add of_node_put() when breaking out of loop
tty: xilinx_uartps: Fix the ignore_status
media: xilinx: vipp: Fix refcount leak in xvip_graph_dma_init
RDMA/rxe: Fix "kernel NULL pointer dereference" error
RDMA/rxe: Fix the error caused by qp->sk
dyndbg: fix module.dyndbg handling
dyndbg: let query-modname override actual module name
ata: fix ata_id_sense_reporting_enabled() and ata_id_has_sense_reporting()
ata: fix ata_id_has_devslp()
ata: fix ata_id_has_ncq_autosense()
ata: fix ata_id_has_dipm()
md/raid5: Ensure stripe_fill happens on non-read IO with journal
xhci: Don't show warning for reinit on known broken suspend
usb: gadget: function: fix dangling pnp_string in f_printer.c
drivers: serial: jsm: fix some leaks in probe
phy: qualcomm: call clk_disable_unprepare in the error handling
firmware: google: Test spinlock on panic path to avoid lockups
serial: 8250: Fix restoring termios speed after suspend
fsi: core: Check error number after calling ida_simple_get
mfd: intel_soc_pmic: Fix an error handling path in intel_soc_pmic_i2c_probe()
mfd: fsl-imx25: Fix an error handling path in mx25_tsadc_setup_irq()
mfd: lp8788: Fix an error handling path in lp8788_probe()
mfd: lp8788: Fix an error handling path in lp8788_irq_init() and lp8788_irq_init()
mfd: sm501: Add check for platform_driver_register()
dmaengine: ioat: stop mod_timer from resurrecting deleted timer in __cleanup()
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
clk: bcm2835: fix bcm2835_clock_rate_from_divisor declaration
clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe
mailbox: bcm-ferxrm-mailbox: Fix error check for dma_map_sg
powerpc/math_emu/efp: Include module.h
powerpc/sysdev/fsl_msi: Add missing of_node_put()
powerpc/pci_dn: Add missing of_node_put()
powerpc/powernv: add missing of_node_put() in opal_export_attrs()
powerpc: Fix SPE Power ISA properties for e500v1 platforms
iommu/omap: Fix buffer overflow in debugfs
iommu/iova: Fix module config properly
crypto: cavium - prevent integer overflow loading firmware
f2fs: fix race condition on setting FI_NO_EXTENT flag
ACPI: video: Add Toshiba Satellite/Portege Z830 quirk
MIPS: BCM47XX: Cast memcmp() of function to (void *)
powercap: intel_rapl: fix UBSAN shift-out-of-bounds issue
thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash
NFSD: Return nfserr_serverfault if splice_ok but buf->pages have data
wifi: brcmfmac: fix invalid address access when enabling SCAN log level
openvswitch: Fix double reporting of drops in dropwatch
openvswitch: Fix overreporting of drops in dropwatch
tcp: annotate data-race around tcp_md5sig_pool_populated
wifi: ath9k: avoid uninit memory read in ath9k_htc_rx_msg()
xfrm: Update ipcomp_scratches with NULL when freed
wifi: brcmfmac: fix use-after-free bug in brcmf_netdev_start_xmit()
Bluetooth: L2CAP: initialize delayed works at l2cap_chan_create()
Bluetooth: hci_sysfs: Fix attempting to call device_add multiple times
can: bcm: check the result of can_send() in bcm_can_tx()
wifi: rt2x00: don't run Rt5592 IQ calibration on MT7620
wifi: rt2x00: set correct TX_SW_CFG1 MAC register for MT7620
wifi: rt2x00: set SoC wmac clock register
wifi: rt2x00: correctly set BBP register 86 for MT7620
net: If sock is dead don't access sock's sk_wq in sk_stream_wait_memory
Bluetooth: L2CAP: Fix user-after-free
r8152: Rate limit overflow messages
drm: Use size_t type for len variable in drm_copy_field()
drm: Prevent drm_copy_field() to attempt copying a NULL pointer
drm/vc4: vec: Fix timings for VEC modes
platform/x86: msi-laptop: Change DMI match / alias strings to fix module autoloading
drm/amdgpu: fix initial connector audio value
ARM: dts: imx7d-sdb: config the max pressure for tsc2046
ARM: dts: imx6q: add missing properties for sram
ARM: dts: imx6dl: add missing properties for sram
ARM: dts: imx6qp: add missing properties for sram
ARM: dts: imx6sl: add missing properties for sram
media: cx88: Fix a null-ptr-deref bug in buffer_prepare()
scsi: 3w-9xxx: Avoid disabling device if failing to enable it
nbd: Fix hung when signal interrupts nbd_start_device_ioctl()
HID: roccat: Fix use-after-free in roccat_read()
md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d
usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info()
usb: musb: Fix musb_gadget.c rxstate overflow bug
Revert "usb: storage: Add quirk for Samsung Fit flash"
usb: idmouse: fix an uninit-value in idmouse_open
perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc
net: ieee802154: return -EINVAL for unknown addr type
net/ieee802154: don't warn zero-sized raw_sendmsg()
ext4: continue to expand file system when the target size doesn't reach
md: Replace snprintf with scnprintf
efi: libstub: drop pointless get_memory_map() call
inet: fully convert sk->sk_rx_dst to RCU rules
thermal: intel_powerclamp: Use first online CPU as control_cpu
Linux 4.14.296
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I7d490d1d6185e26e23921167583f36793b87b9c1
[ Upstream commit e75ef56f74965f426dd819a41336b640ffdd8fbc ]
dyndbg's control-parser: ddebug_parse_query(), requires that search
terms: module, func, file, lineno, are used only once in a query; a
thing cannot be named both foo and bar.
The cited commit added an overriding module modname, taken from the
module loader, which is authoritative. So it set query.module 1st,
which disallowed its use in the query-string.
But now, its useful to allow a module-load to enable classes across a
whole (or part of) a subsystem at once.
# enable (dynamic-debug in) drm only
modprobe drm dyndbg="class DRM_UT_CORE +p"
# get drm_helper too
modprobe drm dyndbg="class DRM_UT_CORE module drm* +p"
# get everything that knows DRM_UT_CORE
modprobe drm dyndbg="class DRM_UT_CORE module * +p"
# also for boot-args:
drm.dyndbg="class DRM_UT_CORE module * +p"
So convert the override into a default, by filling it only when/after
the query-string omitted the module.
NB: the query class FOO handling is forthcoming.
Fixes: 8e59b5cfb9 dynamic_debug: add modname arg to exec_query callchain
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-8-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Changes in 4.14.194
USB: serial: qcserial: add EM7305 QDL product ID
net/mlx5e: Don't support phys switch id if not in switchdev mode
USB: iowarrior: fix up report size handling for some devices
usb: xhci: define IDs for various ASMedia host controllers
usb: xhci: Fix ASMedia ASM1142 DMA addressing
ALSA: seq: oss: Serialize ioctls
staging: android: ashmem: Fix lockdep warning for write operation
Bluetooth: Fix slab-out-of-bounds read in hci_extended_inquiry_result_evt()
Bluetooth: Prevent out-of-bounds read in hci_inquiry_result_evt()
Bluetooth: Prevent out-of-bounds read in hci_inquiry_result_with_rssi_evt()
omapfb: dss: Fix max fclk divider for omap36xx
binder: Prevent context manager from incrementing ref 0
vgacon: Fix for missing check in scrollback handling
mtd: properly check all write ioctls for permissions
leds: wm831x-status: fix use-after-free on unbind
leds: da903x: fix use-after-free on unbind
leds: lm3533: fix use-after-free on unbind
leds: 88pm860x: fix use-after-free on unbind
net/9p: validate fds in p9_fd_open
drm/nouveau/fbcon: fix module unload when fbcon init has failed for some reason
drm/nouveau/fbcon: zero-initialise the mode_cmd2 structure
i2c: slave: improve sanity check when registering
i2c: slave: add sanity check when unregistering
cfg80211: check vendor command doit pointer before use
igb: reinit_locked() should be called with rtnl_lock
atm: fix atm_dev refcnt leaks in atmtcp_remove_persistent
tools lib traceevent: Fix memory leak in process_dynamic_array_len
Drivers: hv: vmbus: Ignore CHANNELMSG_TL_CONNECT_RESULT(23)
xattr: break delegations in {set,remove}xattr
ipv4: Silence suspicious RCU usage warning
ipv6: fix memory leaks on IPV6_ADDRFORM path
net: ethernet: mtk_eth_soc: fix MTU warnings
vxlan: Ensure FDB dump is performed under RCU
net: lan78xx: replace bogus endpoint lookup
hv_netvsc: do not use VF device if link is down
net: gre: recompute gre csum for sctp over gre tunnels
openvswitch: Prevent kernel-infoleak in ovs_ct_put_key()
Revert "vxlan: fix tos value before xmit"
selftests/net: relax cpu affinity requirement in msg_zerocopy test
usb: hso: check for return value in hso_serial_common_create()
rxrpc: Fix race between recvmsg and sendmsg on immediate call failure
Smack: fix use-after-free in smk_write_relabel_self()
tracepoint: Mark __tracepoint_string's __used
HID: input: Fix devices that return multiple bytes in battery report
cgroup: add missing skcd->no_refcnt check in cgroup_sk_clone()
x86/mce/inject: Fix a wrong assignment of i_mce.status
sched: correct SD_flags returned by tl->sd_flags()
arm64: dts: rockchip: fix rk3399-puma vcc5v0-host gpio
arm64: dts: rockchip: fix rk3399-puma gmac reset gpio
EDAC: Fix reference count leaks
arm64: dts: qcom: msm8916: Replace invalid bias-pull-none property
arm64: dts: exynos: Fix silent hang after boot on Espresso
m68k: mac: Don't send IOP message until channel is idle
m68k: mac: Fix IOP status/control register writes
platform/x86: intel-hid: Fix return value check in check_acpi_dev()
platform/x86: intel-vbtn: Fix return value check in check_acpi_dev()
ARM: at91: pm: add missing put_device() call in at91_pm_sram_init()
spi: lantiq: fix: Rx overflow error in full duplex mode
ARM: socfpga: PM: add missing put_device() call in socfpga_setup_ocram_self_refresh()
drm/tilcdc: fix leak & null ref in panel_connector_get_modes
Bluetooth: add a mutex lock to avoid UAF in do_enale_set
fs/btrfs: Add cond_resched() for try_release_extent_mapping() stalls
drm/radeon: Fix reference count leaks caused by pm_runtime_get_sync
video: fbdev: neofb: fix memory leak in neo_scan_monitor()
md-cluster: fix wild pointer of unlock_all_bitmaps()
arm64: dts: hisilicon: hikey: fixes to comply with adi, adv7533 DT binding
drm/nouveau: fix multiple instances of reference count leaks
drm/debugfs: fix plain echo to connector "force" attribute
irqchip/irq-mtk-sysirq: Replace spinlock with raw_spinlock
mm/mmap.c: Add cond_resched() for exit_mmap() CPU stalls
brcmfmac: To fix Bss Info flag definition Bug
brcmfmac: set state of hanger slot to FREE when flushing PSQ
iwlegacy: Check the return value of pcie_capability_read_*()
gpu: host1x: debug: Fix multiple channels emitting messages simultaneously
usb: gadget: net2280: fix memory leak on probe error handling paths
bdc: Fix bug causing crash after multiple disconnects
usb: bdc: Halt controller on suspend
dyndbg: fix a BUG_ON in ddebug_describe_flags
bcache: fix super block seq numbers comparision in register_cache_set()
ACPICA: Do not increment operation_region reference counts for field units
agp/intel: Fix a memory leak on module initialisation failure
video: fbdev: sm712fb: fix an issue about iounmap for a wrong address
console: newport_con: fix an issue about leak related system resources
video: pxafb: Fix the function used to balance a 'dma_alloc_coherent()' call
iio: improve IIO_CONCENTRATION channel type description
drm/arm: fix unintentional integer overflow on left shift
leds: lm355x: avoid enum conversion warning
media: omap3isp: Add missed v4l2_ctrl_handler_free() for preview_init_entities()
ASoC: Intel: bxt_rt298: add missing .owner field
scsi: cumana_2: Fix different dev_id between request_irq() and free_irq()
drm/mipi: use dcs write for mipi_dsi_dcs_set_tear_scanline
cxl: Fix kobject memleak
drm/radeon: fix array out-of-bounds read and write issues
scsi: powertec: Fix different dev_id between request_irq() and free_irq()
scsi: eesox: Fix different dev_id between request_irq() and free_irq()
ipvs: allow connection reuse for unconfirmed conntrack
media: firewire: Using uninitialized values in node_probe()
media: exynos4-is: Add missed check for pinctrl_lookup_state()
xfs: fix reflink quota reservation accounting error
PCI: Fix pci_cfg_wait queue locking problem
leds: core: Flush scheduled work for system suspend
drm: panel: simple: Fix bpc for LG LB070WV8 panel
drm/bridge: sil_sii8620: initialize return of sii8620_readb
scsi: scsi_debug: Add check for sdebug_max_queue during module init
mwifiex: Prevent memory corruption handling keys
powerpc/vdso: Fix vdso cpu truncation
staging: rtl8192u: fix a dubious looking mask before a shift
PCI/ASPM: Add missing newline in sysfs 'policy'
drm/imx: tve: fix regulator_disable error path
USB: serial: iuu_phoenix: fix led-activity helpers
thermal: ti-soc-thermal: Fix reversed condition in ti_thermal_expose_sensor()
coresight: tmc: Fix TMC mode read in tmc_read_unprepare_etb()
MIPS: OCTEON: add missing put_device() call in dwc3_octeon_device_init()
usb: dwc2: Fix error path in gadget registration
scsi: mesh: Fix panic after host or bus reset
net: dsa: mv88e6xxx: MV88E6097 does not support jumbo configuration
Smack: fix another vsscanf out of bounds
Smack: prevent underflow in smk_set_cipso()
power: supply: check if calc_soc succeeded in pm860x_init_battery
Bluetooth: hci_serdev: Only unregister device if it was registered
selftests/powerpc: Fix CPU affinity for child process
PCI: Release IVRS table in AMD ACS quirk
selftests/powerpc: Fix online CPU selection
s390/qeth: don't process empty bridge port events
wl1251: fix always return 0 error
tools, build: Propagate build failures from tools/build/Makefile.build
net: ethernet: aquantia: Fix wrong return value
liquidio: Fix wrong return value in cn23xx_get_pf_num()
net: spider_net: Fix the size used in a 'dma_free_coherent()' call
fsl/fman: use 32-bit unsigned integer
fsl/fman: fix dereference null return value
fsl/fman: fix unreachable code
fsl/fman: check dereferencing null pointer
fsl/fman: fix eth hash table allocation
dlm: Fix kobject memleak
pinctrl-single: fix pcs_parse_pinconf() return value
x86/fsgsbase/64: Fix NULL deref in 86_fsgsbase_read_task
crypto: aesni - add compatibility with IAS
af_packet: TPACKET_V3: fix fill status rwlock imbalance
drivers/net/wan/lapbether: Added needed_headroom and a skb->len check
net/nfc/rawsock.c: add CAP_NET_RAW check.
net: refactor bind_bucket fastreuse into helper
net: Set fput_needed iff FDPUT_FPUT is set
USB: serial: cp210x: re-enable auto-RTS on open
USB: serial: cp210x: enable usb generic throttle/unthrottle
ALSA: usb-audio: Creative USB X-Fi Pro SB1095 volume knob support
ALSA: usb-audio: fix overeager device match for MacroSilicon MS2109
ALSA: usb-audio: add quirk for Pioneer DDJ-RB
crypto: qat - fix double free in qat_uclo_create_batch_init_list
crypto: ccp - Fix use of merged scatterlists
crypto: cpt - don't sleep of CRYPTO_TFM_REQ_MAY_SLEEP was not specified
bitfield.h: don't compile-time validate _val in FIELD_FIT
fs/minix: check return value of sb_getblk()
fs/minix: don't allow getting deleted inodes
fs/minix: reject too-large maximum file size
ALSA: usb-audio: work around streaming quirk for MacroSilicon MS2109
9p: Fix memory leak in v9fs_mount
spi: spidev: Align buffers for DMA
mtd: rawnand: qcom: avoid write to unavailable register
parisc: Implement __smp_store_release and __smp_load_acquire barriers
parisc: mask out enable and reserved bits from sba imask
ARM: 8992/1: Fix unwind_frame for clang-built kernels
irqdomain/treewide: Free firmware node after domain removal
xen/balloon: fix accounting in alloc_xenballooned_pages error path
xen/balloon: make the balloon wait interruptible
net: initialize fastreuse on inet_inherit_port
smb3: warn on confusing error scenario with sec=krb5
PCI: hotplug: ACPI: Fix context refcounting in acpiphp_grab_context()
btrfs: don't allocate anonymous block device for user invisible roots
btrfs: only search for left_info if there is no right_info in try_merge_free_space
btrfs: fix memory leaks after failure to lookup checksums during inode logging
dt-bindings: iio: io-channel-mux: Fix compatible string in example code
iio: dac: ad5592r: fix unbalanced mutex unlocks in ad5592r_read_raw()
xtensa: fix xtensa_pmu_setup prototype
powerpc: Fix circular dependency between percpu.h and mmu.h
net: ethernet: stmmac: Disable hardware multicast filter
net: stmmac: dwmac1000: provide multicast filter fallback
net/compat: Add missing sock updates for SCM_RIGHTS
md/raid5: Fix Force reconstruct-write io stuck in degraded raid5
bcache: allocate meta data pages as compound pages
mac80211: fix misplaced while instead of if
MIPS: CPU#0 is not hotpluggable
ext2: fix missing percpu_counter_inc
ocfs2: change slot number type s16 to u16
ftrace: Setup correct FTRACE_FL_REGS flags for module
kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler
tracing/hwlat: Honor the tracing_cpumask
tracing: Use trace_sched_process_free() instead of exit() for pid tracing
watchdog: f71808e_wdt: indicate WDIOF_CARDRESET support in watchdog_info.options
watchdog: f71808e_wdt: remove use of wrong watchdog_info option
watchdog: f71808e_wdt: clear watchdog timeout occurred flag
pseries: Fix 64 bit logical memory block panic
perf intel-pt: Fix FUP packet state
drm/imx: imx-ldb: Disable both channels for split mode in enc->disable()
mfd: arizona: Ensure 32k clock is put on driver unbind and error
RDMA/ipoib: Return void from ipoib_ib_dev_stop()
USB: serial: ftdi_sio: make process-packet buffer unsigned
USB: serial: ftdi_sio: clean up receive processing
gpu: ipu-v3: image-convert: Combine rotate/no-rotate irq handlers
dm rq: don't call blk_mq_queue_stopped() in dm_stop_queue()
iommu/omap: Check for failure of a call to omap_iommu_dump_ctx
iommu/vt-d: Enforce PASID devTLB field mask
i2c: rcar: slave: only send STOP event when we have been addressed
clk: clk-atlas6: fix return value check in atlas6_clk_init()
pwm: bcm-iproc: handle clk_get_rate() return
tools build feature: Use CC and CXX from parent
i2c: rcar: avoid race when unregistering slave
Input: sentelic - fix error return when fsp_reg_write fails
drm/vmwgfx: Use correct vmw_legacy_display_unit pointer
drm/vmwgfx: Fix two list_for_each loop exit tests
net: qcom/emac: add missed clk_disable_unprepare in error path of emac_clks_phase1_init
nfs: Fix getxattr kernel panic and memory overflow
fs/ufs: avoid potential u32 multiplication overflow
test_kmod: avoid potential double free in trigger_config_run_type()
mfd: dln2: Run event handler loop under spinlock
ALSA: echoaudio: Fix potential Oops in snd_echo_resume()
perf bench mem: Always memset source before memcpy
tools build feature: Quote CC and CXX for their arguments
sh: landisk: Add missing initialization of sh_io_port_base
khugepaged: retract_page_tables() remember to test exit
genirq/affinity: Handle affinity setting on inactive interrupts correctly
genirq/affinity: Make affinity setting if activated opt-in
dm cache: pass cache structure to mode functions
dm cache: submit writethrough writes in parallel to origin and cache
dm cache: remove all obsolete writethrough-specific code
Linux 4.14.194
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I0a759b837bffc0f5af5fe1b6a38ccdd465e41e6e
[ Upstream commit f678ce8cc3cb2ad29df75d8824c74f36398ba871 ]
ddebug_describe_flags() currently fills a caller provided string buffer,
after testing its size (also passed) in a BUG_ON. Fix this by
replacing them with a known-big-enough string buffer wrapped in a
struct, and passing that instead.
Also simplify ddebug_describe_flags() flags parameter from a struct to
a member in that struct, and hoist the member deref up to the caller.
This makes the function reusable (soon) where flags are unpacked.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-8-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
With the realization that having debugfs enabled on "production" systems
is generally not a good idea, debugfs is being disabled from more and
more platforms over time. However, the functionality of dynamic
debugging still is needed at times, and since it relies on debugfs for
its user api, having debugfs disabled also forces dynamic debug to be
disabled.
To get around this, also create the "control" file for dynamic_debug in
procfs. This allows people turn on debugging as needed at runtime for
individual driverfs and subsystems.
Bug: 145162121
Reported-by: many different companies
Cc: Jason Baron <jbaron@akamai.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200210211142.GB1373304@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 239a5791ffd5559f51815df442c4dbbe7fc21ade)
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Icd892ea823af6254726847700fd9c251d13b556b
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Bug: 145162121
Cc: linux-kernel@vger.kernel.org
Acked-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 9fd714cd7f4676e8ff3f840911a8d64cacbeab8b)
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I471385f3af3f96c767f59ae76ea0a115c9eb4f7a
A _lot_ of ->write() instances were open-coding it; some are
converted to memdup_user_nul(), a lot more remain...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull trivial tree changes from Jiri Kosina:
"Patches from trivial.git that keep the world turning around.
Mostly documentation and comment fixes, and a two corner-case code
fixes from Alan Cox"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
kexec, Kconfig: spell "architecture" properly
mm: fix cleancache debugfs directory path
blackfin: mach-common: ints-priority: remove unused function
doubletalk: probe failure causes OOPS
ARM: cache-l2x0.c: Make it clear that cache-l2x0 handles L310 cache controller
msdos_fs.h: fix 'fields' in comment
scsi: aic7xxx: fix comment
ARM: l2c: fix comment
ibmraid: fix writeable attribute with no store method
dynamic_debug: fix comment
doc: usbmon: fix spelling s/unpriviledged/unprivileged/
x86: init_mem_mapping(): use capital BIOS in comment
Using seq_open_private() removes boilerplate code from ddebug_proc_open().
The resultant code is shorter and easier to follow.
This patch does not change any functionality.
Signed-off-by: Rob Jones <rob.jones@codethink.co.uk>
Acked-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The return value is not used by callers of these functions
so change the functions to return void.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add wildcard '*'(matches zero or more characters) and '?' (matches one
character) support when qurying debug flags.
Now we can open debug messages using keywords. eg:
1. open debug logs in all usb drivers
echo "file drivers/usb/* +p" > <debugfs>/dynamic_debug/control
2. open debug logs for usb xhci code
echo "file *xhci* +p" > <debugfs>/dynamic_debug/control
Signed-off-by: Du, Changbin <changbin.du@gmail.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Settings of the form, 'line x module y +p', can fail arbitrarily due to an
uninitialized local variable. With this patch results are consistent, as
expected.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ma noted that dynamic-debug is silent about many query errors, so add
pr_err()s to explain those errors, and tweak a few others. Also parse
flags 1st, so that match-spec errs are slightly clearer.
CC: Jianpeng Ma <majianpeng@gmail.com>
CC: Joe Perches <joe@perches.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vpr_info_dq should be a function and vpr_info should have
a do {} while (0)
Add missing newlines to pr_<level>s.
Miscellaneous neatening too.
braces, coalescing formats, alignments, etc...
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
netdev_printk originally called dev_printk with %pV.
This style emitted the complete dev_printk header with
a colon followed by the netdev_name prefix followed
by a colon.
Now that netdev_printk does not call dev_printk, the
extra colon is superfluous. Remove it.
Example:
old: sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
new: sky2 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex, flow control both
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: David S. Miller <davem@davemloft.net>
Tested-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A lot of stack is used in recursive printks with %pV.
Using multiple levels of %pV (a logging function with %pV
that calls another logging function with %pV) can consume
more stack than necessary.
Avoid excessive stack use by not calling dev_printk from
netdev_printk and dynamic_netdev_dbg. Duplicate the logic
and form of dev_printk instead.
Make __netdev_printk static.
Remove EXPORT_SYMBOL(__netdev_printk)
Whitespace and brace style neatening.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: David S. Miller <davem@davemloft.net>
Tested-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c4e00daaa9
("driver-core: extend dev_printk() to pass structured data")
changed __dev_printk and broke dynamic-debug's ability to control the
dynamic prefix of dev_dbg(dev,..).
commit af7f2158fd
("drivers-core: make structured logging play nice with dynamic-debug")
made a minimal correction.
The current dynamic debug code uses up to 3 recursion levels via %pV.
This can consume quite a bit of stack. Directly call printk_emit to
reduce the recursion depth.
These changes include:
dev_dbg:
o Create and use function create_syslog_header to format the syslog
header for printk_emit uses.
o Call create_syslog_header and neaten __dev_printk
o Make __dev_printk static not global
o Remove include header declaration of __dev_printk
o Remove now unused EXPORT_SYMBOL() of __dev_printk
o Whitespace neatening
dynamic_dev_dbg:
o Remove KERN_DEBUG from dynamic_emit_prefix
o Call create_syslog_header and printk_emit
o Whitespace neatening
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: David S. Miller <davem@davemloft.net>
Tested-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 04db6e5fdd.
Odds are, we really don't want to revert all of these, and need to be
more careful in the future to make sure we don't break the build of
other arches.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These arent currently needed, so drop them. Some will probably get
re-added when static-branches are added, but include loops prevent
that at present.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1- Call dynamic_debug_init() from early_initcall, not arch_initcall.
2- Call dynamic_debug_init_debugfs() from fs_initcall, not module_init.
RFC: This works for me on a 64 bit desktop and a i586 SBC, but is
untested on other arches. I presume there is or was a reason
original code used arch_initcall, maybe the constraints have changed.
This makes facility available as soon as possible.
2nd change has a downside when dynamic_debug.verbose=1; all the
vpr_info()s called in the proc-fs code are activated, causing
voluminous output from dmesg. TBD: Im unsure of this explanation, but
the output is there. This could be fixed by changing those callsites
to v2pr_info(if verbose > 1).
1st change is still not early enough to enable pr_debugs in
kernel/params, so parsing of boot-args isnt logged. The reparse of
those args is however visible after params.dyndbg="+p" is processed.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pass module name into ddebug_exec_queries(), ddebug_exec_query(), and
ddebug_parse_query() as separate parameter. In ddebug_parse_query(),
the module name is added into the query struct before the query-string
is parsed. This allows the query-string to be shorter:
instead of:
$modname.dyndbg="module $modname +fp"
do this:
$modname.dyndbg="+fp"
Omitting "module $modname" from the query string is actually required
for $modname.dyndbg rules; the set-only-once check added in a previous
patch will throw an error if its added again. ddebug_query="..." has
no $modname associated with it, so the query string may include it.
This also fixes redundant "module $modname" otherwise needed to handle
multiple queries per string:
$modname.dyndbg="func foo +fp; func bar +fp"
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Print ram usage of dynamic-debug tables and verbose section so user
knows cost of enabling CONFIG_DYNAMIC_DEBUG. This only counts the
size of the _ddebug tables for builtins and the __verbose section that
they refer to, not those used in loadable modules.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We dont want errors while parsing ddebug_query to unload ddebug
tables, so set success after tables are loaded, and return 0 after
query parsing is done.
Simplify error handling code since its no longer used for success,
and change goto label to out_err to clarify this.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor ddebug_dyndbg_boot_param_cb and ddebug_dyndbg_module_param_cb
into a common helper function, and call it from both. The handling of
foo.dyndbg is unneeded by the latter, but harmless.
The 2 callers differ only by pr_info and the return code they pass to
the helper for when an unknown param is handled. I could slightly
reduce dmesg clutter by putting the vpr_info in the common helper,
after the return on_err, but that loses __func__ context, is overly
silent on module_cb unknown param errors, and the clutter is only when
dynamic_debug.verbose=1 anyway.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With ddebug_dyndbg_boot_params_cb() handling bare dyndbg params, we
dont need ddebug_query param anymore. Add a warning when processing
ddebug_query= param that it is deprecated, and to change it to dyndbg=
Add a deprecation notice for v3.8 to feature-removal-schedule.txt, and
add a suggested deprecation period of 3 releases to the header.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This introduces a fake module param $module.dyndbg. Its based upon
Thomas Renninger's $module.ddebug boot-time debugging patch from
https://lkml.org/lkml/2010/9/15/397
The 'fake' module parameter is provided for all modules, whether or
not they need it. It is not explicitly added to each module, but is
implemented in callbacks invoked from parse_args.
For builtin modules, dynamic_debug_init() now directly calls
parse_args(..., &ddebug_dyndbg_boot_params_cb), to process the params
undeclared in the modules, just after the ddebug tables are processed.
While its slightly weird to reprocess the boot params, parse_args() is
already called repeatedly by do_initcall_levels(). More importantly,
the dyndbg queries (given in ddebug_query or dyndbg params) cannot be
activated until after the ddebug tables are ready, and reusing
parse_args is cleaner than doing an ad-hoc parse. This reparse would
break options like inc_verbosity, but they probably should be params,
like verbosity=3.
ddebug_dyndbg_boot_params_cb() handles both bare dyndbg (aka:
ddebug_query) and module-prefixed dyndbg params, and ignores all other
parameters. For example, the following will enable pr_debug()s in 4
builtin modules, in the order given:
dyndbg="module params +p; module aio +p" module.dyndbg=+p pci.dyndbg
For loadable modules, parse_args() in load_module() calls
ddebug_dyndbg_module_params_cb(). This handles bare dyndbg params as
passed from modprobe, and errors on other unknown params.
Note that modprobe reads /proc/cmdline, so "modprobe foo" grabs all
foo.params, strips the "foo.", and passes these to the kernel.
ddebug_dyndbg_module_params_cb() is again called for the unknown
params; it handles dyndbg, and errors on others. The "doing" arg
added previously contains the module name.
For non CONFIG_DYNAMIC_DEBUG builds, the stub function accepts
and ignores $module.dyndbg params, other unknowns get -ENOENT.
If no param value is given (as in pci.dyndbg example above), "+p" is
assumed, which enables all pr_debug callsites in the module.
The dyndbg fake parameter is not shown in /sys/module/*/parameters,
thus it does not use any resources. Changes to it are made via the
control file.
Also change pr_info in ddebug_exec_queries to vpr_info,
no need to see it all the time.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
CC: Thomas Renninger <trenn@suse.de>
CC: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use vpr_info to declutter code, reduce indenting, and change one
additional pr_info call in ddebug_exec_queries.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Insert ddebug_exec_queries() in place of ddebug_exec_query(). It
splits the query string on [;\n], and calls ddebug_exec_query() on
each. All queries are processed independent of errors, allowing a
query to fail, for example when a module is not installed. Empty
lines and comments are skipped. Errors are counted, and the last
error seen (negative) or the number of callsites found (0 or positive)
is returned. Return code checks are altered accordingly.
With this, multiple queries can be given in ddebug_query, allowing
more selective enabling of callsites. As a side effect, a set of
commands can be batched in:
cat cmd-file > $DBGMT/dynamic_debug/control
We dont want a ddebug_query syntax error to kill the dynamic debug
facility, so dynamic_debug_init() zeros ddebug_exec_queries()'s return
code after logging the appropriate message, so that ddebug tables are
preserved and $DBGMT/dynamic_debug/control file is created. This
would be appropriate even without accepting multiple queries.
This patch also alters ddebug_change() to return number of callsites
matched (which typically is the same as number of callsites changed).
ddebug_exec_query() also returns the number found, or a negative value
if theres a parse error on the query.
Splitting on [;\n] prevents their use in format-specs, but selecting
callsites on punctuation is brittle anyway, meaningful and selective
substrings are more typical.
Note: splitting queries on ';' before handling trailing #comments
means that a ';' also terminates a comment, and text after the ';' is
treated as another query. This trailing query will almost certainly
result in a parse error and thus have no effect other than the error
message. The double corner case with unexpected results is:
ddebug_query="func foo +p # enable foo ; +p"
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
