Add syscall epoll_pwait2, an epoll_wait variant with nsec resolution that
replaces int timeout with struct timespec. It is equivalent otherwise.
int epoll_pwait2(int fd, struct epoll_event *events,
int maxevents,
const struct timespec *timeout,
const sigset_t *sigset);
The underlying hrtimer is already programmed with nsec resolution.
pselect and ppoll also set nsec resolution timeout with timespec.
The sigset_t in epoll_pwait has a compat variant. epoll_pwait2 needs
the same.
For timespec, only support this new interface on 2038 aware platforms
that define __kernel_timespec_t. So no CONFIG_COMPAT_32BIT_TIME.
Link: https://lkml.kernel.org/r/20201121144401.3727659-3-willemdebruijn.kernel@gmail.com
Change-Id: I8cb4e756aacb4bee7cbe1c2cb5320a59e07626f8
Signed-off-by: Willem de Bruijn <willemb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using the helper functions do_epoll_create() and do_epoll_wait() allows us
to remove in-kernel calls to the related syscall functions.
This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Change-Id: I73c8f43d7db845e0b7ec5ec00fbc575fbcb8ca5e
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
commit 678379e1d4f7443b170939525d3312cfc37bf86b upstream.
Cloning a descriptor table picks the size that would cover all currently
opened files. That's fine for clone() and unshare(), but for close_range()
there's an additional twist - we clone before we close, and it would be
a shame to have
close_range(3, ~0U, CLOSE_RANGE_UNSHARE)
leave us with a huge descriptor table when we are not going to keep
anything past stderr, just because some large file descriptor used to
be open before our call has taken it out.
Unfortunately, it had been dealt with in an inherently racy way -
sane_fdtable_size() gets a "don't copy anything past that" argument
(passed via unshare_fd() and dup_fd()), close_range() decides how much
should be trimmed and passes that to unshare_fd().
The problem is, a range that used to extend to the end of descriptor
table back when close_range() had looked at it might very well have stuff
grown after it by the time dup_fd() has allocated a new files_struct
and started to figure out the capacity of fdtable to be attached to that.
That leads to interesting pathological cases; at the very least it's a
QoI issue, since unshare(CLONE_FILES) is atomic in a sense that it takes
a snapshot of descriptor table one might have observed at some point.
Since CLOSE_RANGE_UNSHARE close_range() is supposed to be a combination
of unshare(CLONE_FILES) with plain close_range(), ending up with a
weird state that would never occur with unshare(2) is confusing, to put
it mildly.
It's not hard to get rid of - all it takes is passing both ends of the
range down to sane_fdtable_size(). There we are under ->files_lock,
so the race is trivially avoided.
So we do the following:
* switch close_files() from calling unshare_fd() to calling
dup_fd().
* undo the calling convention change done to unshare_fd() in
60997c3d45d9 "close_range: add CLOSE_RANGE_UNSHARE"
* introduce struct fd_range, pass a pointer to that to dup_fd()
and sane_fdtable_size() instead of "trim everything past that point"
they are currently getting. NULL means "we are not going to be punching
any holes"; NR_OPEN_MAX is gone.
* make sane_fdtable_size() use find_last_bit() instead of
open-coding it; it's easier to follow that way.
* while we are at it, have dup_fd() report errors by returning
ERR_PTR(), no need to use a separate int *errorp argument.
Fixes: 60997c3d45d9 "close_range: add CLOSE_RANGE_UNSHARE"
Cc: stable@vger.kernel.org
Change-Id: I6782a2edf98970b6c2d662048061e28f7e57b9c9
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d888c83fcec75194a8a48ccd283953bdba7b2550 ]
Jason Donenfeld reports that my commit 1c24a186398f ("fs: fd tables have
to be multiples of BITS_PER_LONG") doesn't work, and the reason is an
embarrassing brown-paper-bag bug.
Yes, we want to align the number of fds to BITS_PER_LONG, and yes, the
reason they might not be aligned is because the incoming 'max_fd'
argument might not be aligned.
But aligining the argument - while simple - will cause a "infinitely
big" maxfd (eg NR_OPEN_MAX) to just overflow to zero. Which most
definitely isn't what we want either.
The obvious fix was always just to do the alignment last, but I had
moved it earlier just to make the patch smaller and the code look
simpler. Duh. It certainly made _me_ look simple.
Fixes: 1c24a186398f ("fs: fd tables have to be multiples of BITS_PER_LONG")
Reported-and-tested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Fedor Pchelkin <aissur0002@gmail.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Christian Brauner <brauner@kernel.org>
Change-Id: I6d3a0c28896e8cf8cab30f60679aab785aeee193
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c24a186398f59c80adb9a967486b65c1423a59d ]
This has always been the rule: fdtables have several bitmaps in them,
and as a result they have to be sized properly for bitmaps. We walk
those bitmaps in chunks of 'unsigned long' in serveral cases, but even
when we don't, we use the regular kernel bitops that are defined to work
on arrays of 'unsigned long', not on some byte array.
Now, the distinction between arrays of bytes and 'unsigned long'
normally only really ends up being noticeable on big-endian systems, but
Fedor Pchelkin and Alexey Khoroshilov reported that copy_fd_bitmaps()
could be called with an argument that wasn't even a multiple of
BITS_PER_BYTE. And then it fails to do the proper copy even on
little-endian machines.
The bug wasn't in copy_fd_bitmap(), but in sane_fdtable_size(), which
didn't actually sanitize the fdtable size sufficiently, and never made
sure it had the proper BITS_PER_LONG alignment.
That's partly because the alignment historically came not from having to
explicitly align things, but simply from previous fdtable sizes, and
from count_open_files(), which counts the file descriptors by walking
them one 'unsigned long' word at a time and thus naturally ends up doing
sizing in the proper 'chunks of unsigned long'.
But with the introduction of close_range(), we now have an external
source of "this is how many files we want to have", and so
sane_fdtable_size() needs to do a better job.
This also adds that explicit alignment to alloc_fdtable(), although
there it is mainly just for documentation at a source code level. The
arithmetic we do there to pick a reasonable fdtable size already aligns
the result sufficiently.
In fact,clang notices that the added ALIGN() in that function doesn't
actually do anything, and does not generate any extra code for it.
It turns out that gcc ends up confusing itself by combining a previous
constant-sized shift operation with the variable-sized shift operations
in roundup_pow_of_two(). And probably due to that doesn't notice that
the ALIGN() is a no-op. But that's a (tiny) gcc misfeature that doesn't
matter. Having the explicit alignment makes sense, and would actually
matter on a 128-bit architecture if we ever go there.
This also adds big comments above both functions about how fdtable sizes
have to have that BITS_PER_LONG alignment.
Fixes: 60997c3d45d9 ("close_range: add CLOSE_RANGE_UNSHARE")
Reported-by: Fedor Pchelkin <aissur0002@gmail.com>
Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Link: https://lore.kernel.org/all/20220326114009.1690-1-aissur0002@gmail.com/
Tested-and-acked-by: Christian Brauner <brauner@kernel.org>
Change-Id: Ib64319f20fecec1c367bf0167e1b14b47751537a
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d3b4bec3ce55e0c46cdce7d0402dbd6b4af3a3d ]
First of all, tell it how many slots do we want, not which slot
is wanted. It makes one caller (dup_fd()) more straightforward
and doesn't harm another (expand_fdtable()).
Furthermore, make it return ERR_PTR() on failure rather than
returning NULL. Simplifies the callers.
Simplify the size calculation, while we are at it - note that we
always have slots_wanted greater than BITS_PER_LONG. What the
rules boil down to is
* use the smallest power of two large enough to give us
that many slots
* on 32bit skip 64 and 128 - the minimal capacity we want
there is 256 slots (i.e. 1Kb fd array).
* on 64bit don't skip anything, the minimal capacity is
128 - and we'll never be asked for 64 or less. 128 slots means
1Kb fd array, again.
* on 128bit, if that ever happens, don't skip anything -
we'll never be asked for 128 or less, so the fd array allocation
will be at least 2Kb.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Change-Id: Id6ae21da951bdb42fdb4361285ada3eb377f3a6b
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Ulrich Hecht <uli@kernel.org>
It never looked too pleasant and it doesn't really buy us anything
anymore now that CLOSE_RANGE_CLOEXEC exists and we need to retake the
current maximum under the lock for it anyway. This also makes the logic
easier to follow.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Giuseppe Scrivano <gscrivan@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Change-Id: I72be5b078d7edc061318b0eda36a351e1dc01e56
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
syzbot reported a bug when putting the last reference to a tasks file
descriptor table. Debugging this showed we didn't recalculate the
current maximum fd number for CLOSE_RANGE_UNSHARE | CLOSE_RANGE_CLOEXEC
after we unshared the file descriptors table. So max_fd could exceed the
current fdtable maximum causing us to set excessive bits. As a concrete
example, let's say the user requested everything from fd 4 to ~0UL to be
closed and their current fdtable size is 256 with their highest open fd
being 4. With CLOSE_RANGE_UNSHARE the caller will end up with a new
fdtable which has room for 64 file descriptors since that is the lowest
fdtable size we accept. But now max_fd will still point to 255 and needs
to be adjusted. Fix this by retrieving the correct maximum fd value in
__range_cloexec().
Reported-by: syzbot+283ce5a46486d6acdbaf@syzkaller.appspotmail.com
Fixes: 582f1fb6b721 ("fs, close_range: add flag CLOSE_RANGE_CLOEXEC")
Fixes: fec8a6a69103 ("close_range: unshare all fds for CLOSE_RANGE_UNSHARE | CLOSE_RANGE_CLOEXEC")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Giuseppe Scrivano <gscrivan@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: stable@vger.kernel.org
Change-Id: Ib6aeb02d2b4556ba048cd4ca8150f9d2c29abdb3
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
After introducing CLOSE_RANGE_CLOEXEC syzbot reported a crash when
CLOSE_RANGE_CLOEXEC is specified in conjunction with CLOSE_RANGE_UNSHARE.
When CLOSE_RANGE_UNSHARE is specified the caller will receive a private
file descriptor table in case their file descriptor table is currently
shared.
For the case where the caller has requested all file descriptors to be
actually closed via e.g. close_range(3, ~0U, 0) the kernel knows that
the caller does not need any of the file descriptors anymore and will
optimize the close operation by only copying all files in the range from
0 to 3 and no others.
However, if the caller requested CLOSE_RANGE_CLOEXEC together with
CLOSE_RANGE_UNSHARE the caller wants to still make use of the file
descriptors so the kernel needs to copy all of them and can't optimize.
The original patch didn't account for this and thus could cause oopses
as evidenced by the syzbot report because it assumed that all fds had
been copied. Fix this by handling the CLOSE_RANGE_CLOEXEC case.
syzbot reported
==================================================================
BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:71 [inline]
BUG: KASAN: null-ptr-deref in atomic64_read include/asm-generic/atomic-instrumented.h:837 [inline]
BUG: KASAN: null-ptr-deref in atomic_long_read include/asm-generic/atomic-long.h:29 [inline]
BUG: KASAN: null-ptr-deref in filp_close+0x22/0x170 fs/open.c:1274
Read of size 8 at addr 0000000000000077 by task syz-executor511/8522
CPU: 1 PID: 8522 Comm: syz-executor511 Not tainted 5.10.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x107/0x163 lib/dump_stack.c:120
__kasan_report mm/kasan/report.c:549 [inline]
kasan_report.cold+0x5/0x37 mm/kasan/report.c:562
check_memory_region_inline mm/kasan/generic.c:186 [inline]
check_memory_region+0x13d/0x180 mm/kasan/generic.c:192
instrument_atomic_read include/linux/instrumented.h:71 [inline]
atomic64_read include/asm-generic/atomic-instrumented.h:837 [inline]
atomic_long_read include/asm-generic/atomic-long.h:29 [inline]
filp_close+0x22/0x170 fs/open.c:1274
close_files fs/file.c:402 [inline]
put_files_struct fs/file.c:417 [inline]
put_files_struct+0x1cc/0x350 fs/file.c:414
exit_files+0x12a/0x170 fs/file.c:435
do_exit+0xb4f/0x2a00 kernel/exit.c:818
do_group_exit+0x125/0x310 kernel/exit.c:920
get_signal+0x428/0x2100 kernel/signal.c:2792
arch_do_signal_or_restart+0x2a8/0x1eb0 arch/x86/kernel/signal.c:811
handle_signal_work kernel/entry/common.c:147 [inline]
exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
exit_to_user_mode_prepare+0x124/0x200 kernel/entry/common.c:201
__syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline]
syscall_exit_to_user_mode+0x19/0x50 kernel/entry/common.c:302
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x447039
Code: Unable to access opcode bytes at RIP 0x44700f.
RSP: 002b:00007f1b1225cdb8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: 0000000000000001 RBX: 00000000006dbc28 RCX: 0000000000447039
RDX: 00000000000f4240 RSI: 0000000000000081 RDI: 00000000006dbc2c
RBP: 00000000006dbc20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dbc2c
R13: 00007fff223b6bef R14: 00007f1b1225d9c0 R15: 00000000006dbc2c
==================================================================
syzbot has tested the proposed patch and the reproducer did not trigger any issue:
Reported-and-tested-by: syzbot+96cfd2b22b3213646a93@syzkaller.appspotmail.com
Tested on:
commit: 10f7cddd selftests/core: add regression test for CLOSE_RAN..
git tree: git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux.git vfs
kernel config: https://syzkaller.appspot.com/x/.config?x=5d42216b510180e3
dashboard link: https://syzkaller.appspot.com/bug?extid=96cfd2b22b3213646a93
compiler: gcc (GCC) 10.1.0-syz 20200507
Reported-by: syzbot+96cfd2b22b3213646a93@syzkaller.appspotmail.com
Fixes: 582f1fb6b721 ("fs, close_range: add flag CLOSE_RANGE_CLOEXEC")
Cc: Giuseppe Scrivano <gscrivan@redhat.com>
Cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20201217213303.722643-1-christian.brauner@ubuntu.com
Change-Id: I92120c3f81e2811d3a2a1a76fa60cf2e75a56f42
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
When the flag CLOSE_RANGE_CLOEXEC is set, close_range doesn't
immediately close the files but it sets the close-on-exec bit.
It is useful for e.g. container runtimes that usually install a
seccomp profile "as late as possible" before execv'ing the container
process itself. The container runtime could either do:
1 2
- install_seccomp_profile(); - close_range(MIN_FD, MAX_INT, 0);
- close_range(MIN_FD, MAX_INT, 0); - install_seccomp_profile();
- execve(...); - execve(...);
Both alternative have some disadvantages.
In the first variant the seccomp_profile cannot block the close_range
syscall, as well as opendir/read/close/... for the fallback on older
kernels.
In the second variant, close_range() can be used only on the fds
that are not going to be needed by the runtime anymore, and it must be
potentially called multiple times to account for the different ranges
that must be closed.
Using close_range(..., ..., CLOSE_RANGE_CLOEXEC) solves these issues.
The runtime is able to use the existing open fds, the seccomp profile
can block close_range() and the syscalls used for its fallback.
Change-Id: I1c84a733698c2853a0126cd22960ada25b229c5a
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Link: https://lore.kernel.org/r/20201118104746.873084-2-gscrivan@redhat.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
One of the use-cases of close_range() is to drop file descriptors just before
execve(). This would usually be expressed in the sequence:
unshare(CLONE_FILES);
close_range(3, ~0U);
as pointed out by Linus it might be desirable to have this be a part of
close_range() itself under a new flag CLOSE_RANGE_UNSHARE.
This expands {dup,unshare)_fd() to take a max_fds argument that indicates the
maximum number of file descriptors to copy from the old struct files. When the
user requests that all file descriptors are supposed to be closed via
close_range(min, max) then we can cap via unshare_fd(min) and hence don't need
to do any of the heavy fput() work for everything above min.
The patch makes it so that if CLOSE_RANGE_UNSHARE is requested and we do in
fact currently share our file descriptor table we create a new private copy.
We then close all fds in the requested range and finally after we're done we
install the new fd table.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Change-Id: I0813045886501e40a45693ee1edad50bdf2b66e5
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
This adds the close_range() syscall. It allows to efficiently close a range
of file descriptors up to all file descriptors of a calling task.
I was contacted by FreeBSD as they wanted to have the same close_range()
syscall as we proposed here. We've coordinated this and in the meantime, Kyle
was fast enough to merge close_range() into FreeBSD already in April:
https://reviews.freebsd.org/D21627https://svnweb.freebsd.org/base?view=revision&revision=359836
and the current plan is to backport close_range() to FreeBSD 12.2 (cf. [2])
once its merged in Linux too. Python is in the process of switching to
close_range() on FreeBSD and they are waiting on us to merge this to switch on
Linux as well: https://bugs.python.org/issue38061
The syscall came up in a recent discussion around the new mount API and
making new file descriptor types cloexec by default. During this
discussion, Al suggested the close_range() syscall (cf. [1]). Note, a
syscall in this manner has been requested by various people over time.
First, it helps to close all file descriptors of an exec()ing task. This
can be done safely via (quoting Al's example from [1] verbatim):
/* that exec is sensitive */
unshare(CLONE_FILES);
/* we don't want anything past stderr here */
close_range(3, ~0U);
execve(....);
The code snippet above is one way of working around the problem that file
descriptors are not cloexec by default. This is aggravated by the fact that
we can't just switch them over without massively regressing userspace. For
a whole class of programs having an in-kernel method of closing all file
descriptors is very helpful (e.g. demons, service managers, programming
language standard libraries, container managers etc.).
(Please note, unshare(CLONE_FILES) should only be needed if the calling
task is multi-threaded and shares the file descriptor table with another
thread in which case two threads could race with one thread allocating file
descriptors and the other one closing them via close_range(). For the
general case close_range() before the execve() is sufficient.)
Second, it allows userspace to avoid implementing closing all file
descriptors by parsing through /proc/<pid>/fd/* and calling close() on each
file descriptor. From looking at various large(ish) userspace code bases
this or similar patterns are very common in:
- service managers (cf. [4])
- libcs (cf. [6])
- container runtimes (cf. [5])
- programming language runtimes/standard libraries
- Python (cf. [2])
- Rust (cf. [7], [8])
As Dmitry pointed out there's even a long-standing glibc bug about missing
kernel support for this task (cf. [3]).
In addition, the syscall will also work for tasks that do not have procfs
mounted and on kernels that do not have procfs support compiled in. In such
situations the only way to make sure that all file descriptors are closed
is to call close() on each file descriptor up to UINT_MAX or RLIMIT_NOFILE,
OPEN_MAX trickery (cf. comment [8] on Rust).
The performance is striking. For good measure, comparing the following
simple close_all_fds() userspace implementation that is essentially just
glibc's version in [6]:
static int close_all_fds(void)
{
int dir_fd;
DIR *dir;
struct dirent *direntp;
dir = opendir("/proc/self/fd");
if (!dir)
return -1;
dir_fd = dirfd(dir);
while ((direntp = readdir(dir))) {
int fd;
if (strcmp(direntp->d_name, ".") == 0)
continue;
if (strcmp(direntp->d_name, "..") == 0)
continue;
fd = atoi(direntp->d_name);
if (fd == dir_fd || fd == 0 || fd == 1 || fd == 2)
continue;
close(fd);
}
closedir(dir);
return 0;
}
to close_range() yields:
1. closing 4 open files:
- close_all_fds(): ~280 us
- close_range(): ~24 us
2. closing 1000 open files:
- close_all_fds(): ~5000 us
- close_range(): ~800 us
close_range() is designed to allow for some flexibility. Specifically, it
does not simply always close all open file descriptors of a task. Instead,
callers can specify an upper bound.
This is e.g. useful for scenarios where specific file descriptors are
created with well-known numbers that are supposed to be excluded from
getting closed.
For extra paranoia close_range() comes with a flags argument. This can e.g.
be used to implement extension. Once can imagine userspace wanting to stop
at the first error instead of ignoring errors under certain circumstances.
There might be other valid ideas in the future. In any case, a flag
argument doesn't hurt and keeps us on the safe side.
From an implementation side this is kept rather dumb. It saw some input
from David and Jann but all nonsense is obviously my own!
- Errors to close file descriptors are currently ignored. (Could be changed
by setting a flag in the future if needed.)
- __close_range() is a rather simplistic wrapper around __close_fd().
My reasoning behind this is based on the nature of how __close_fd() needs
to release an fd. But maybe I misunderstood specifics:
We take the files_lock and rcu-dereference the fdtable of the calling
task, we find the entry in the fdtable, get the file and need to release
files_lock before calling filp_close().
In the meantime the fdtable might have been altered so we can't just
retake the spinlock and keep the old rcu-reference of the fdtable
around. Instead we need to grab a fresh reference to the fdtable.
If my reasoning is correct then there's really no point in fancyfying
__close_range(): We just need to rcu-dereference the fdtable of the
calling task once to cap the max_fd value correctly and then go on
calling __close_fd() in a loop.
/* References */
[1]: https://lore.kernel.org/lkml/20190516165021.GD17978@ZenIV.linux.org.uk/
[2]: 9e4f2f3a6b/Modules/_posixsubprocess.c (L220)
[3]: https://sourceware.org/bugzilla/show_bug.cgi?id=10353#c7
[4]: 5238e95759/src/basic/fd-util.c (L217)
[5]: ddf4b77e11/src/lxc/start.c (L236)
[6]: https://sourceware.org/git/?p=glibc.git;a=blob;f=sysdeps/unix/sysv/linux/grantpt.c;h=2030e07fa6e652aac32c775b8c6e005844c3c4eb;hb=HEAD#l17
Note that this is an internal implementation that is not exported.
Currently, libc seems to not provide an exported version of this
because of missing kernel support to do this.
Note, in a recent patch series Florian made grantpt() a nop thereby
removing the code referenced here.
[7]: https://github.com/rust-lang/rust/issues/12148
[8]: 5f47c0613e/src/libstd/sys/unix/process2.rs (L303-L308)
Rust's solution is slightly different but is equally unperformant.
Rust calls getdtablesize() which is a glibc library function that
simply returns the current RLIMIT_NOFILE or OPEN_MAX values. Rust then
goes on to call close() on each fd. That's obviously overkill for most
tasks. Rarely, tasks - especially non-demons - hit RLIMIT_NOFILE or
OPEN_MAX.
Let's be nice and assume an unprivileged user with RLIMIT_NOFILE set
to 1024. Even in this case, there's a very high chance that in the
common case Rust is calling the close() syscall 1021 times pointlessly
if the task just has 0, 1, and 2 open.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Change-Id: I2f7abcf9210a1e79855837d1b7c580cc7f7a38e2
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kyle Evans <self@kyle-evans.net>
Cc: Jann Horn <jannh@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Dmitry V. Levin <ldv@altlinux.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: linux-api@vger.kernel.org
We can use a inner function to init the disk time
of f2fs_inode_info for cleaning redundant code.
Change-Id: Iafd6cd55a764372c17b7eb90931336a9b9727f1a
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The VFS structures are finally converted to always use 64-bit timestamps,
and this file system can represent a long range of on-disk timestamps
already, so now let's fit in the missing bits for udf.
Change-Id: Ic886649a0d3fa0fa6a0d1ae2771c29cffb35631d
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jan Kara <jack@suse.cz>
While the regular inode timestamps all use timespec64 now, the i_otime
field is btrfs specific and still needs to be converted to correctly
represent times beyond 2038.
Change-Id: I847b77ca8cca3b7d8eec7eb6cad22ab509beb052
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Both vfs and the on-disk inode structures can deal with fine-grained
timestamps now, so this is the last missing piece to make ubifs
y2038-safe on 32-bit architectures.
Change-Id: I8c1fa7cc6e64cd30771c51de8efd99ceaf8d94fd
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
The on-disk representation and the vfs both use 64-bit tv_sec values,
so let's change the last missing piece in the middle.
Change-Id: Iebc60247d79e006d101cd0a63a19591aaa871a16
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
All of fuse uses 64-bit timestamps with the exception of the
fuse_change_attributes(), so let's convert this one as well.
Change-Id: Ibe120305d151ea8c8231ef7a73a1ae593296d2a8
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Since the vfs structures are all using timespec64, we can now
change the internal representation, using ceph_encode_timespec64 and
ceph_decode_timespec64.
In case of ceph_aux_inode however, we need to avoid doing a memcmp()
on uninitialized padding data, so the members of the i_mtime field get
copied individually into 64-bit integers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Change-Id: Ia1a10ea74dc07ce95bfc8ad6ddb5080d5ec41db7
As vfs moves to using struct timespec64 to represent times,
update the argument to timespec_truncate() to use
struct timespec64. Also change the name of the function.
The rest of the implementation logic is the same.
Move this to fs/inode.c instead of kernel/time/time.c as all the
users of this api are filesystems.
Change-Id: I19b58d7d1d5ec263b04237a33b8f981e7d407171
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: <viro@zeniv.linux.org.uk>
This prepares pstore for converting the VFS layer to timespec64.
Change-Id: Id2dfb977f0e3d41a935eb03344555eeace394875
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
__getnstimeofday() is a rather odd interface, with a number of quirks:
- The caller may come from NMI context, but the implementation is not NMI safe,
one way to get there from NMI is
NMI handler:
something bad
panic()
kmsg_dump()
pstore_dump()
pstore_record_init()
__getnstimeofday()
- The calling conventions are different from any other timekeeping functions,
to deal with returning an error code during suspended timekeeping.
Address the above issues by using a completely different method to get the
time: ktime_get_real_fast_ns() is NMI safe and has a reasonable behavior
when timekeeping is suspended: it returns the time at which it got
suspended. As Thomas Gleixner explained, this is safe, as
ktime_get_real_fast_ns() does not call into the clocksource driver that
might be suspended.
The result can easily be transformed into a timespec structure. Since
ktime_get_real_fast_ns() was not exported to modules, add the export.
The pstore behavior for the suspended case changes slightly, as it now
stores the timestamp at which timekeeping was suspended instead of storing
a zero timestamp.
This change is not addressing y2038-safety, that's subject to a more
complex follow up patch.
Change-Id: Id259b99ce7a7cba52abad39f61420ec977e26e37
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Colin Cross <ccross@android.com>
Link: https://lkml.kernel.org/r/20171110152530.1926955-1-arnd@arndb.de
Usage of these apis and their compat versions makes
the syscalls: select family of syscalls and their
compat implementations simpler.
This is a preparatory patch to isolate data conversions to
struct timespec64 at userspace boundaries. This helps contain
the changes needed to transition to new y2038 safe types.
Change-Id: I5fa34f0baccc0eba709d450dd7616bb6e45613f2
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
• default segment reclamation (4096), along with that of other OEMs, is designed for MIUI, HyperOS's, and other $hit stocks roms.
heavy I/O patterns (background services, frequent writes).
For AOSP: 1. Lower Overhead: Smaller Garbage Collection (GC) batches
reduce CPU/storage load.
2. Better Responsiveness: Avoid long GC pauses during light
usage.
3. Battery Savings: Less aggressive reclaiming reduces
power spikes.
Change-Id: 710531a8b778ce9bc190b87ffe22fa3a52e51499
Signed-off-by: Kanishk <kanishkthederp@gmail.com>
Signed-off-by: TogoFire <togofire@mailfence.com>
Signed-off-by: Pranav Vashi <neobuddy89@gmail.com>
A lot of ->destroy_inode() instances end with call_rcu() of a callback
that does RCU-delayed part of freeing. Introduce a new method for
doing just that, with saner signature.
Rules:
->destroy_inode ->free_inode
f g immediate call of f(),
RCU-delayed call of g()
f NULL immediate call of f(),
no RCU-delayed calls
NULL g RCU-delayed call of g()
NULL NULL RCU-delayed default freeing
IOW, NULL ->free_inode gives the same behaviour as now.
Note that NULL, NULL is equivalent to NULL, free_inode_nonrcu; we could
mandate the latter form, but that would have very little benefit beyond
making rules a bit more symmetric. It would break backwards compatibility,
require extra boilerplate and expected semantics for (NULL, NULL) pair
would have no use whatsoever...
Change-Id: I828dd519b381a1f25013ec3d1eae0b6835eb9c26
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add file_pos field to bpf_sysctl context to read and write sysctl file
position at which sysctl is being accessed (read or written).
The field can be used to e.g. override whole sysctl value on write to
sysctl even when sys_write is called by user space with file_pos > 0. Or
BPF program may reject such accesses.
Change-Id: Ia2674d14b24b99c5081522f8b3025c52f6228bfa
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add helpers to work with new value being written to sysctl by user
space.
bpf_sysctl_get_new_value() copies value being written to sysctl into
provided buffer.
bpf_sysctl_set_new_value() overrides new value being written by user
space with a one from provided buffer. Buffer should contain string
representation of the value, similar to what can be seen in /proc/sys/.
Both helpers can be used only on sysctl write.
File position matters and can be managed by an interface that will be
introduced separately. E.g. if user space calls sys_write to a file in
/proc/sys/ at file position = X, where X > 0, then the value set by
bpf_sysctl_set_new_value() will be written starting from X. If program
wants to override whole value with specified buffer, file position has
to be set to zero.
Documentation for the new helpers is provided in bpf.h UAPI.
Change-Id: Ibd8931b2ebb9b88563424141a66269ddb0d193b4
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Containerized applications may run as root and it may create problems
for whole host. Specifically such applications may change a sysctl and
affect applications in other containers.
Furthermore in existing infrastructure it may not be possible to just
completely disable writing to sysctl, instead such a process should be
gradual with ability to log what sysctl are being changed by a
container, investigate, limit the set of writable sysctl to currently
used ones (so that new ones can not be changed) and eventually reduce
this set to zero.
The patch introduces new program type BPF_PROG_TYPE_CGROUP_SYSCTL and
attach type BPF_CGROUP_SYSCTL to solve these problems on cgroup basis.
New program type has access to following minimal context:
struct bpf_sysctl {
__u32 write;
};
Where @write indicates whether sysctl is being read (= 0) or written (=
1).
Helpers to access sysctl name and value will be introduced separately.
BPF_CGROUP_SYSCTL attach point is added to sysctl code right before
passing control to ctl_table->proc_handler so that BPF program can
either allow or deny access to sysctl.
Suggested-by: Roman Gushchin <guro@fb.com>
Change-Id: I1cefe648cac50683d02ca33cbbbd865bd4522dfe
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
While __atomic_add_unless() was originally intended as a building-block
for atomic_add_unless(), it's now used in a number of places around the
kernel. It's the only common atomic operation named __atomic*(), rather
than atomic_*(), and for consistency it would be better named
atomic_fetch_add_unless().
This lack of consistency is slightly confusing, and gets in the way of
scripting atomics. Given that, let's clean things up and promote it to
an official part of the atomics API, in the form of
atomic_fetch_add_unless().
This patch converts definitions and invocations over to the new name,
including the instrumented version, using the following script:
----
git grep -w __atomic_add_unless | while read line; do
sed -i '{s/\<__atomic_add_unless\>/atomic_fetch_add_unless/}' "${line%%:*}";
done
git grep -w __arch_atomic_add_unless | while read line; do
sed -i '{s/\<__arch_atomic_add_unless\>/arch_atomic_fetch_add_unless/}' "${line%%:*}";
done
----
Note that we do not have atomic{64,_long}_fetch_add_unless(), which will
be introduced by later patches.
There should be no functional change as a result of this patch.
Change-Id: I3b917f02eac8e872d4b26d84299d1c351ca95315
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Palmer Dabbelt <palmer@sifive.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/20180621121321.4761-2-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Introduce helper:
int fork_usermode_blob(void *data, size_t len, struct umh_info *info);
struct umh_info {
struct file *pipe_to_umh;
struct file *pipe_from_umh;
pid_t pid;
};
that GPLed kernel modules (signed or unsigned) can use it to execute part
of its own data as swappable user mode process.
The kernel will do:
- allocate a unique file in tmpfs
- populate that file with [data, data + len] bytes
- user-mode-helper code will do_execve that file and, before the process
starts, the kernel will create two unix pipes for bidirectional
communication between kernel module and umh
- close tmpfs file, effectively deleting it
- the fork_usermode_blob will return zero on success and populate
'struct umh_info' with two unix pipes and the pid of the user process
As the first step in the development of the bpfilter project
the fork_usermode_blob() helper is introduced to allow user mode code
to be invoked from a kernel module. The idea is that user mode code plus
normal kernel module code are built as part of the kernel build
and installed as traditional kernel module into distro specified location,
such that from a distribution point of view, there is
no difference between regular kernel modules and kernel modules + umh code.
Such modules can be signed, modprobed, rmmod, etc. The use of this new helper
by a kernel module doesn't make it any special from kernel and user space
tooling point of view.
Such approach enables kernel to delegate functionality traditionally done
by the kernel modules into the user space processes (either root or !root) and
reduces security attack surface of the new code. The buggy umh code would crash
the user process, but not the kernel. Another advantage is that umh code
of the kernel module can be debugged and tested out of user space
(e.g. opening the possibility to run clang sanitizers, fuzzers or
user space test suites on the umh code).
In case of the bpfilter project such architecture allows complex control plane
to be done in the user space while bpf based data plane stays in the kernel.
Since umh can crash, can be oom-ed by the kernel, killed by the admin,
the kernel module that uses them (like bpfilter) needs to manage life
time of umh on its own via two unix pipes and the pid of umh.
The exit code of such kernel module should kill the umh it started,
so that rmmod of the kernel module will cleanup the corresponding umh.
Just like if the kernel module does kmalloc() it should kfree() it
in the exit code.
Change-Id: Ief8d9cea009a094f9d84175f9a6f8123f36aacef
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
1) IS_ERR(p) && PTR_ERR(p) == -E... is spelled p == ERR_PTR(-E...)
2) yes, you can open-code do-while and sometimes there's even
a good reason to do so. Not in this case, though.
Change-Id: I4c0cdeae3e14f702755df22e900ddafcb4d99ba8
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
ns_get_path() takes struct task_struct and proc_ns_ops as its
parameters. For path resolution directly from a namespace,
e.g. based on a networking device's net name space, we need
more flexibility. Add a ns_get_path_cb() helper which will
allow callers to use any method of obtaining the name space
reference. Convert ns_get_path() to use ns_get_path_cb().
Following patches will bring a networking user.
CC: Eric W. Biederman <ebiederm@xmission.com>
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Change-Id: Ifbf04dc7c28f063976525a2afbf4deec9a97c289
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Similar to vfs_create(), but with caller-supplied callback (and
argument for it) to be used instead of ->create().
Change-Id: Ie67e2af6fb43bf75d316105e6eb5c14fc3663dd4
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This reverts commit 0309b3f479b967acb644f99d214e2b25297a20b1
as an updated version of the patch-set will be merged later.
Signed-off-by: Lokesh Gidra <lokeshgidra@google.com>
Bug: 187930641
Change-Id: I765fe86a2dc0305482a0590c14143dee27840b8a
In case mmap_lock is contended, it is possible that userspace can spend
time performing other tasks rather than waiting in uninterruptible-sleep
state for the lock to become available. Even if no other task is
available, it is better to yield or sleep rather than adding contention
to already contended lock.
We introduce MMAP_TRYLOCK mode so that when possible, userspace can
request to use mmap_read_trylock(), returning -EAGAIN if and when it
fails.
Bug: 320478828
Change-Id: I2d196fd317e054af03dbd35ac1b0c7634cb370dc
Signed-off-by: Lokesh Gidra <lokeshgidra@google.com>
Signed-off-by: Cyber Knight <cyberknight755@gmail.com>
