From cbdda20ce363356698835185801a58a28f644853 Mon Sep 17 00:00:00 2001 From: Sergey Shtylyov Date: Sat, 13 Aug 2022 23:34:16 +0300 Subject: [PATCH 01/39] of: fdt: fix off-by-one error in unflatten_dt_nodes() [ Upstream commit 2f945a792f67815abca26fa8a5e863ccf3fa1181 ] Commit 78c44d910d3e ("drivers/of: Fix depth when unflattening devicetree") forgot to fix up the depth check in the loop body in unflatten_dt_nodes() which makes it possible to overflow the nps[] buffer... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Fixes: 78c44d910d3e ("drivers/of: Fix depth when unflattening devicetree") Signed-off-by: Sergey Shtylyov Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/7c354554-006f-6b31-c195-cdfe4caee392@omp.ru Signed-off-by: Sasha Levin --- drivers/of/fdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c index 512d3a8439c9..cc9b8c699da4 100644 --- a/drivers/of/fdt.c +++ b/drivers/of/fdt.c @@ -425,7 +425,7 @@ static int unflatten_dt_nodes(const void *blob, for (offset = 0; offset >= 0 && depth >= initial_depth; offset = fdt_next_node(blob, offset, &depth)) { - if (WARN_ON_ONCE(depth >= FDT_MAX_DEPTH)) + if (WARN_ON_ONCE(depth >= FDT_MAX_DEPTH - 1)) continue; fpsizes[depth+1] = populate_node(blob, offset, &mem, From 54e63f745ca50888b0d151e3d5310f2d3f534aba Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Tue, 6 Sep 2022 12:54:31 +0200 Subject: [PATCH 02/39] gpio: mpc8xxx: Fix support for IRQ_TYPE_LEVEL_LOW flow_type in mpc85xx MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 279c12df8d2efb28def9d037f288cbfb97c30fe2 ] Commit e39d5ef67804 ("powerpc/5xxx: extend mpc8xxx_gpio driver to support mpc512x gpios") implemented support for IRQ_TYPE_LEVEL_LOW flow type in mpc512x via falling edge type. Do same for mpc85xx which support was added in commit 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio"). Fixes probing of lm90 hwmon driver on mpc85xx based board which use level interrupt. Without it kernel prints error and refuse lm90 to work: [ 15.258370] genirq: Setting trigger mode 8 for irq 49 failed (mpc8xxx_irq_set_type+0x0/0xf8) [ 15.267168] lm90 0-004c: cannot request IRQ 49 [ 15.272708] lm90: probe of 0-004c failed with error -22 Fixes: 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio") Signed-off-by: Pali Rohár Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin --- drivers/gpio/gpio-mpc8xxx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c index d5f735ce0dd4..1b213c49ec0f 100644 --- a/drivers/gpio/gpio-mpc8xxx.c +++ b/drivers/gpio/gpio-mpc8xxx.c @@ -157,6 +157,7 @@ static int mpc8xxx_irq_set_type(struct irq_data *d, unsigned int flow_type) switch (flow_type) { case IRQ_TYPE_EDGE_FALLING: + case IRQ_TYPE_LEVEL_LOW: raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags); gc->write_reg(mpc8xxx_gc->regs + GPIO_ICR, gc->read_reg(mpc8xxx_gc->regs + GPIO_ICR) From d882eac4a5e383b9a7a4a0ff915f38adc2fc811a Mon Sep 17 00:00:00 2001 From: Stuart Menefy Date: Thu, 8 Sep 2022 16:51:03 +0100 Subject: [PATCH 03/39] drm/meson: Correct OSD1 global alpha value [ Upstream commit 6836829c8ea453c9e3e518e61539e35881c8ed5f ] VIU_OSD1_CTRL_STAT.GLOBAL_ALPHA is a 9 bit field, so the maximum value is 0x100 not 0xff. This matches the vendor kernel. Signed-off-by: Stuart Menefy Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller") Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20220908155103.686904-1-stuart.menefy@mathembedded.com Signed-off-by: Sasha Levin --- drivers/gpu/drm/meson/meson_plane.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/meson/meson_plane.c b/drivers/gpu/drm/meson/meson_plane.c index 85fa39e2be34..75132d0c5c28 100644 --- a/drivers/gpu/drm/meson/meson_plane.c +++ b/drivers/gpu/drm/meson/meson_plane.c @@ -105,7 +105,7 @@ static void meson_plane_atomic_update(struct drm_plane *plane, /* Enable OSD and BLK0, set max global alpha */ priv->viu.osd1_ctrl_stat = OSD_ENABLE | - (0xFF << OSD_GLOBAL_ALPHA_SHIFT) | + (0x100 << OSD_GLOBAL_ALPHA_SHIFT) | OSD_BLK0_ENABLE; /* Set up BLK0 to point to the right canvas */ From 2d5d9c58cb2059ec279f1923b8b1384c43bf93ba Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Wed, 24 Aug 2022 17:36:57 +0800 Subject: [PATCH 04/39] parisc: ccio-dma: Add missing iounmap in error path in ccio_probe() [ Upstream commit 38238be4e881a5d0abbe4872b4cd6ed790be06c8 ] Add missing iounmap() before return from ccio_probe(), if ccio_init_resources() fails. Fixes: d46c742f827f ("parisc: ccio-dma: Handle kmalloc failure in ccio_init_resources()") Signed-off-by: Yang Yingliang Signed-off-by: Helge Deller Signed-off-by: Sasha Levin --- drivers/parisc/ccio-dma.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c index cc23b30337c1..afae74a99df1 100644 --- a/drivers/parisc/ccio-dma.c +++ b/drivers/parisc/ccio-dma.c @@ -1581,6 +1581,7 @@ static int __init ccio_probe(struct parisc_device *dev) } ccio_ioc_init(ioc); if (ccio_init_resources(ioc)) { + iounmap(ioc->ioc_regs); kfree(ioc); return -ENOMEM; } From 7b22ab270d4df692d2b238a4816399e28bc37c7a Mon Sep 17 00:00:00 2001 From: Stefan Metzmacher Date: Wed, 14 Sep 2022 05:25:46 +0200 Subject: [PATCH 05/39] cifs: don't send down the destination address to sendmsg for a SOCK_STREAM commit 17d3df38dc5f4cec9b0ac6eb79c1859b6e2693a4 upstream. This is ignored anyway by the tcp layer. Signed-off-by: Stefan Metzmacher Cc: stable@vger.kernel.org Reviewed-by: Ronnie Sahlberg Reviewed-by: Paulo Alcantara (SUSE) Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman --- fs/cifs/transport.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index ffc8757e5a3c..c7c62bec9f27 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -153,8 +153,8 @@ smb_send_kvec(struct TCP_Server_Info *server, struct msghdr *smb_msg, *sent = 0; - smb_msg->msg_name = (struct sockaddr *) &server->dstaddr; - smb_msg->msg_namelen = sizeof(struct sockaddr); + smb_msg->msg_name = NULL; + smb_msg->msg_namelen = 0; smb_msg->msg_control = NULL; smb_msg->msg_controllen = 0; if (server->noblocksnd) From 2161c2571cb088f2d476001e4ff07d6a87a68009 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 23 Aug 2022 10:09:57 +0200 Subject: [PATCH 06/39] ASoC: nau8824: Fix semaphore unbalance at error paths [ Upstream commit 5628560e90395d3812800a8e44a01c32ffa429ec ] The semaphore of nau8824 wasn't properly unlocked at some error handling code paths, hence this may result in the unbalance (and potential lock-up). Fix them to handle the semaphore up properly. Signed-off-by: Takashi Iwai Link: https://lore.kernel.org/r/20220823081000.2965-3-tiwai@suse.de Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- sound/soc/codecs/nau8824.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/sound/soc/codecs/nau8824.c b/sound/soc/codecs/nau8824.c index e8ea51247b17..cc745374b828 100644 --- a/sound/soc/codecs/nau8824.c +++ b/sound/soc/codecs/nau8824.c @@ -1015,6 +1015,7 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream, struct snd_soc_codec *codec = dai->codec; struct nau8824 *nau8824 = snd_soc_codec_get_drvdata(codec); unsigned int val_len = 0, osr, ctrl_val, bclk_fs, bclk_div; + int err = -EINVAL; nau8824_sema_acquire(nau8824, HZ); @@ -1031,7 +1032,7 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream, osr &= NAU8824_DAC_OVERSAMPLE_MASK; if (nau8824_clock_check(nau8824, substream->stream, nau8824->fs, osr)) - return -EINVAL; + goto error; regmap_update_bits(nau8824->regmap, NAU8824_REG_CLK_DIVIDER, NAU8824_CLK_DAC_SRC_MASK, osr_dac_sel[osr].clk_src << NAU8824_CLK_DAC_SRC_SFT); @@ -1041,7 +1042,7 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream, osr &= NAU8824_ADC_SYNC_DOWN_MASK; if (nau8824_clock_check(nau8824, substream->stream, nau8824->fs, osr)) - return -EINVAL; + goto error; regmap_update_bits(nau8824->regmap, NAU8824_REG_CLK_DIVIDER, NAU8824_CLK_ADC_SRC_MASK, osr_adc_sel[osr].clk_src << NAU8824_CLK_ADC_SRC_SFT); @@ -1062,7 +1063,7 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream, else if (bclk_fs <= 256) bclk_div = 0; else - return -EINVAL; + goto error; regmap_update_bits(nau8824->regmap, NAU8824_REG_PORT0_I2S_PCM_CTRL_2, NAU8824_I2S_LRC_DIV_MASK | NAU8824_I2S_BLK_DIV_MASK, @@ -1083,15 +1084,17 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream, val_len |= NAU8824_I2S_DL_32; break; default: - return -EINVAL; + goto error; } regmap_update_bits(nau8824->regmap, NAU8824_REG_PORT0_I2S_PCM_CTRL_1, NAU8824_I2S_DL_MASK, val_len); + err = 0; + error: nau8824_sema_release(nau8824); - return 0; + return err; } static int nau8824_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) @@ -1100,8 +1103,6 @@ static int nau8824_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) struct nau8824 *nau8824 = snd_soc_codec_get_drvdata(codec); unsigned int ctrl1_val = 0, ctrl2_val = 0; - nau8824_sema_acquire(nau8824, HZ); - switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { case SND_SOC_DAIFMT_CBM_CFM: ctrl2_val |= NAU8824_I2S_MS_MASTER; @@ -1143,6 +1144,8 @@ static int nau8824_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) return -EINVAL; } + nau8824_sema_acquire(nau8824, HZ); + regmap_update_bits(nau8824->regmap, NAU8824_REG_PORT0_I2S_PCM_CTRL_1, NAU8824_I2S_DF_MASK | NAU8824_I2S_BP_MASK | NAU8824_I2S_PCMB_EN, ctrl1_val); From 8f4ef1ee2fd2129b04a63b21a393622d14ded8e6 Mon Sep 17 00:00:00 2001 From: Xiaolei Wang Date: Thu, 25 Aug 2022 19:19:22 +0800 Subject: [PATCH 07/39] regulator: pfuze100: Fix the global-out-of-bounds access in pfuze100_regulator_probe() [ Upstream commit 78e1e867f44e6bdc72c0e6a2609a3407642fb30b ] The pfuze_chip::regulator_descs is an array of size PFUZE100_MAX_REGULATOR, the pfuze_chip::pfuze_regulators is the pointer to the real regulators of a specific device. The number of real regulator is supposed to be less than the PFUZE100_MAX_REGULATOR, so we should use the size of 'regulator_num * sizeof(struct pfuze_regulator)' in memcpy(). This fixes the out of bounds access bug reported by KASAN. Signed-off-by: Xiaolei Wang Link: https://lore.kernel.org/r/20220825111922.1368055-1-xiaolei.wang@windriver.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- drivers/regulator/pfuze100-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index 587a6bf9037b..6b9c29d6825d 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -614,7 +614,7 @@ static int pfuze100_regulator_probe(struct i2c_client *client, ((pfuze_chip->chip_id == PFUZE200) ? "200" : "3000")); memcpy(pfuze_chip->regulator_descs, pfuze_chip->pfuze_regulators, - sizeof(pfuze_chip->regulator_descs)); + regulator_num * sizeof(struct pfuze_regulator)); ret = pfuze_parse_regulators_dt(pfuze_chip); if (ret) From 755775e55430447cd77fad168b48effff48c6356 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 4 Sep 2022 09:27:50 +0200 Subject: [PATCH 08/39] ALSA: hda/sigmatel: Keep power up while beep is enabled [ Upstream commit 414d38ba871092aeac4ed097ac4ced89486646f7 ] It seems that the beep playback doesn't work well on IDT codec devices when the codec auto-pm is enabled. Keep the power on while the beep switch is enabled. Link: https://bugzilla.suse.com/show_bug.cgi?id=1200544 Link: https://lore.kernel.org/r/20220904072750.26164-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin --- sound/pci/hda/patch_sigmatel.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index f7896a9ae3d6..73ce5c83e7e3 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -222,6 +222,7 @@ struct sigmatel_spec { /* beep widgets */ hda_nid_t anabeep_nid; + bool beep_power_on; /* SPDIF-out mux */ const char * const *spdif_labels; @@ -4481,6 +4482,26 @@ static int stac_suspend(struct hda_codec *codec) stac_shutup(codec); return 0; } + +static int stac_check_power_status(struct hda_codec *codec, hda_nid_t nid) +{ + struct sigmatel_spec *spec = codec->spec; + int ret = snd_hda_gen_check_power_status(codec, nid); + +#ifdef CONFIG_SND_HDA_INPUT_BEEP + if (nid == spec->gen.beep_nid && codec->beep) { + if (codec->beep->enabled != spec->beep_power_on) { + spec->beep_power_on = codec->beep->enabled; + if (spec->beep_power_on) + snd_hda_power_up_pm(codec); + else + snd_hda_power_down_pm(codec); + } + ret |= spec->beep_power_on; + } +#endif + return ret; +} #else #define stac_suspend NULL #endif /* CONFIG_PM */ @@ -4493,6 +4514,7 @@ static const struct hda_codec_ops stac_patch_ops = { .unsol_event = snd_hda_jack_unsol_event, #ifdef CONFIG_PM .suspend = stac_suspend, + .check_power_status = stac_check_power_status, #endif .reboot_notify = stac_shutup, }; From d78b6d27605c81b8acb2fc4b30165dec38299e09 Mon Sep 17 00:00:00 2001 From: "jerry.meng" Date: Mon, 5 Sep 2022 09:24:52 +0800 Subject: [PATCH 09/39] net: usb: qmi_wwan: add Quectel RM520N MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit e1091e226a2bab4ded1fe26efba2aee1aab06450 ] add support for Quectel RM520N which is based on Qualcomm SDX62 chip. 0x0801: DIAG + NMEA + AT + MODEM + RMNET T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0801 Rev= 5.04 S: Manufacturer=Quectel S: Product=RM520N-GL S: SerialNumber=384af524 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: jerry.meng Acked-by: Bjørn Mork Link: https://lore.kernel.org/r/tencent_E50CA8A206904897C2D20DDAE90731183C05@qq.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 0c3129c9ac08..75c09ba6a45f 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1049,6 +1049,7 @@ static const struct usb_device_id products[] = { {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0512)}, /* Quectel EG12/EM12 */ {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0620)}, /* Quectel EM160R-GL */ {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0800)}, /* Quectel RM500Q-GL */ + {QMI_MATCH_FF_FF_FF(0x2c7c, 0x0801)}, /* Quectel RM520N */ /* 3. Combined interface devices matching on interface number */ {QMI_FIXED_INTF(0x0408, 0xea42, 4)}, /* Yota / Megafon M100-1 */ From 867bcae89744ed06b1840251256e42a3ffce52d3 Mon Sep 17 00:00:00 2001 From: Alexander Sverdlin Date: Tue, 6 Sep 2022 11:59:43 +0200 Subject: [PATCH 10/39] MIPS: OCTEON: irq: Fix octeon_irq_force_ciu_mapping() [ Upstream commit ba912afbd611d3a5f22af247721a071ad1d5b9e0 ] For irq_domain_associate() to work the virq descriptor has to be pre-allocated in advance. Otherwise the following happens: WARNING: CPU: 0 PID: 0 at .../kernel/irq/irqdomain.c:527 irq_domain_associate+0x298/0x2e8 error: virq128 is not allocated Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.78-... #1 ... Call Trace: [] show_stack+0x9c/0x130 [] dump_stack+0x90/0xd0 [] __warn+0x118/0x130 [] warn_slowpath_fmt+0x4c/0x70 [] irq_domain_associate+0x298/0x2e8 [] octeon_irq_init_ciu+0x4c8/0x53c [] of_irq_init+0x1e0/0x388 [] init_IRQ+0x4c/0xf4 [] start_kernel+0x404/0x698 Use irq_alloc_desc_at() to avoid the above problem. Signed-off-by: Alexander Sverdlin Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin --- arch/mips/cavium-octeon/octeon-irq.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c index a27b3d70393f..657e626cc41e 100644 --- a/arch/mips/cavium-octeon/octeon-irq.c +++ b/arch/mips/cavium-octeon/octeon-irq.c @@ -127,6 +127,16 @@ static void octeon_irq_free_cd(struct irq_domain *d, unsigned int irq) static int octeon_irq_force_ciu_mapping(struct irq_domain *domain, int irq, int line, int bit) { + struct device_node *of_node; + int ret; + + of_node = irq_domain_get_of_node(domain); + if (!of_node) + return -EINVAL; + ret = irq_alloc_desc_at(irq, of_node_to_nid(of_node)); + if (ret < 0) + return ret; + return irq_domain_associate(domain, irq, line << 6 | bit); } From 13fdc1dc7d392d90de8d596fb09d2d71bce59c94 Mon Sep 17 00:00:00 2001 From: Youling Tang Date: Thu, 1 Sep 2022 19:10:59 +0800 Subject: [PATCH 11/39] mksysmap: Fix the mismatch of 'L0' symbols in System.map [ Upstream commit c17a2538704f926ee4d167ba625e09b1040d8439 ] When System.map was generated, the kernel used mksysmap to filter the kernel symbols, we need to filter "L0" symbols in LoongArch architecture. $ cat System.map | grep L0 9000000000221540 t L0 The L0 symbol exists in System.map, but not in .tmp_System.map. When "cmp -s System.map .tmp_System.map" will show "Inconsistent kallsyms data" error message in link-vmlinux.sh script. Signed-off-by: Youling Tang Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin --- scripts/mksysmap | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/mksysmap b/scripts/mksysmap index 9aa23d15862a..ad8bbc52267d 100755 --- a/scripts/mksysmap +++ b/scripts/mksysmap @@ -41,4 +41,4 @@ # so we just ignore them to let readprofile continue to work. # (At least sparc64 has __crc_ in the middle). -$NM -n $1 | grep -v '\( [aNUw] \)\|\(__crc_\)\|\( \$[adt]\)\|\( \.L\)' > $2 +$NM -n $1 | grep -v '\( [aNUw] \)\|\(__crc_\)\|\( \$[adt]\)\|\( \.L\)\|\( L0\)' > $2 From 9556a88a16e381dbd6834da95206742d0973afc6 Mon Sep 17 00:00:00 2001 From: Hyunwoo Kim Date: Mon, 20 Jun 2022 07:17:46 -0700 Subject: [PATCH 12/39] video: fbdev: pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write [ Upstream commit a09d2d00af53b43c6f11e6ab3cb58443c2cac8a7 ] In pxa3xx_gcu_write, a count parameter of type size_t is passed to words of type int. Then, copy_from_user() may cause a heap overflow because it is used as the third argument of copy_from_user(). Signed-off-by: Hyunwoo Kim Signed-off-by: Helge Deller Signed-off-by: Sasha Levin --- drivers/video/fbdev/pxa3xx-gcu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/fbdev/pxa3xx-gcu.c b/drivers/video/fbdev/pxa3xx-gcu.c index 4febbe21b9b5..db861bb39150 100644 --- a/drivers/video/fbdev/pxa3xx-gcu.c +++ b/drivers/video/fbdev/pxa3xx-gcu.c @@ -391,7 +391,7 @@ pxa3xx_gcu_write(struct file *file, const char *buff, struct pxa3xx_gcu_batch *buffer; struct pxa3xx_gcu_priv *priv = to_pxa3xx_gcu_priv(file); - int words = count / 4; + size_t words = count / 4; /* Does not need to be atomic. There's a lock in user space, * but anyhow, this is just for statistics. */ From d1fef7a4fa0b94ac9269a17e8c5eea06505677bc Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 5 Sep 2022 15:06:30 +0200 Subject: [PATCH 13/39] ALSA: hda/sigmatel: Fix unused variable warning for beep power change commit 51bdc8bb82525cd70feb92279c8b7660ad7948dd upstream. The newly added stac_check_power_status() caused a compile warning when CONFIG_SND_HDA_INPUT_BEEP is disabled. Fix it. Fixes: 414d38ba8710 ("ALSA: hda/sigmatel: Keep power up while beep is enabled") Reported-by: kernel test robot Link: https://lore.kernel.org/r/20220905130630.2845-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/pci/hda/patch_sigmatel.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 73ce5c83e7e3..79049c5f42fd 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4485,7 +4485,9 @@ static int stac_suspend(struct hda_codec *codec) static int stac_check_power_status(struct hda_codec *codec, hda_nid_t nid) { +#ifdef CONFIG_SND_HDA_INPUT_BEEP struct sigmatel_spec *spec = codec->spec; +#endif int ret = snd_hda_gen_check_power_status(codec, nid); #ifdef CONFIG_SND_HDA_INPUT_BEEP From e0ff39448cea654843744c72c6780293c5082cb1 Mon Sep 17 00:00:00 2001 From: Siddh Raman Pant Date: Sat, 20 Aug 2022 01:33:40 +0530 Subject: [PATCH 14/39] wifi: mac80211: Fix UAF in ieee80211_scan_rx() [ Upstream commit 60deb9f10eec5c6a20252ed36238b55d8b614a2c ] ieee80211_scan_rx() tries to access scan_req->flags after a null check, but a UAF is observed when the scan is completed and __ieee80211_scan_completed() executes, which then calls cfg80211_scan_done() leading to the freeing of scan_req. Since scan_req is rcu_dereference()'d, prevent the racing in __ieee80211_scan_completed() by ensuring that from mac80211's POV it is no longer accessed from an RCU read critical section before we call cfg80211_scan_done(). Cc: stable@vger.kernel.org Link: https://syzkaller.appspot.com/bug?extid=f9acff9bf08a845f225d Reported-by: syzbot+f9acff9bf08a845f225d@syzkaller.appspotmail.com Suggested-by: Johannes Berg Signed-off-by: Siddh Raman Pant Link: https://lore.kernel.org/r/20220819200340.34826-1-code@siddh.me Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin --- net/mac80211/scan.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index dd9d7c4b7f2d..5df8f393c119 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -385,10 +385,6 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted) scan_req = rcu_dereference_protected(local->scan_req, lockdep_is_held(&local->mtx)); - if (scan_req != local->int_scan_req) { - local->scan_info.aborted = aborted; - cfg80211_scan_done(scan_req, &local->scan_info); - } RCU_INIT_POINTER(local->scan_req, NULL); scan_sdata = rcu_dereference_protected(local->scan_sdata, @@ -398,6 +394,13 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted) local->scanning = 0; local->scan_chandef.chan = NULL; + synchronize_rcu(); + + if (scan_req != local->int_scan_req) { + local->scan_info.aborted = aborted; + cfg80211_scan_done(scan_req, &local->scan_info); + } + /* Set power back to normal operating levels. */ ieee80211_hw_config(local, 0); From 823053a56f9b91ff6530ca1458553229411af534 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 1 Sep 2022 10:36:34 -0400 Subject: [PATCH 15/39] USB: core: Fix RST error in hub.c commit 766a96dc558385be735a370db867e302c8f22153 upstream. A recent commit added an invalid RST expression to a kerneldoc comment in hub.c. The fix is trivial. Fixes: 9c6d778800b9 ("USB: core: Prevent nested device-reset calls") Cc: Reported-by: Stephen Rothwell Reviewed-by: Bagas Sanjaya Signed-off-by: Alan Stern Link: https://lore.kernel.org/r/YxDDcsLtRZ7c20pq@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 93f1a234be4f..54fa401219c6 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -5738,7 +5738,7 @@ re_enumerate_no_bos: * * Return: The same as for usb_reset_and_verify_device(). * However, if a reset is already in progress (for instance, if a - * driver doesn't have pre_ or post_reset() callbacks, and while + * driver doesn't have pre_reset() or post_reset() callbacks, and while * being unbound or re-bound during the ongoing reset its disconnect() * or probe() routine tries to perform a second, nested reset), the * routine returns -EINPROGRESS. From bbe86ed0b1afeb1bc43d2cd71d3ae93c007d854e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Carl=20Yin=28=E6=AE=B7=E5=BC=A0=E6=88=90=29?= Date: Fri, 2 Sep 2022 09:49:43 +0000 Subject: [PATCH 16/39] USB: serial: option: add Quectel BG95 0x0203 composition commit f8f67eff6847f9b8d753fa029723bcc54296055a upstream. Add support for the following Quectel BG95 composition: 0x0203: Diag + GNSS + Modem + ECM usb-devices output: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0203 Rev= 0.00 S: Manufacturer=Quectel, Incorporated S: Product=Quectel LPWA Module S: SerialNumber=71d3a21b C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 3 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms I: If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Carl Yin Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index f0c0a4a445e7..6e9819505379 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1141,6 +1141,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0xff, 0xff), .driver_info = NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0, 0) }, + { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, 0x0203, 0xff), /* BG95-M3 */ + .driver_info = ZLP }, { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96), .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff), From f1491adc256485a6c161cf0398bae7ddea976ae3 Mon Sep 17 00:00:00 2001 From: jerry meng Date: Mon, 5 Sep 2022 14:35:33 +0800 Subject: [PATCH 17/39] USB: serial: option: add Quectel RM520N commit d640c4cb8f2f933c0ca896541f9de7fb1ae245f4 upstream. add support for Quectel RM520N which is based on Qualcomm SDX62 chip. 0x0801: DIAG + NMEA + AT + MODEM + RMNET T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0801 Rev= 5.04 S: Manufacturer=Quectel S: Product=RM520N-GL S: SerialNumber=384af524 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: jerry meng Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 6e9819505379..736a2906a15d 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -259,6 +259,7 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_EM060K 0x030b #define QUECTEL_PRODUCT_EM12 0x0512 #define QUECTEL_PRODUCT_RM500Q 0x0800 +#define QUECTEL_PRODUCT_RM520N 0x0801 #define QUECTEL_PRODUCT_EC200S_CN 0x6002 #define QUECTEL_PRODUCT_EC200T 0x6026 #define QUECTEL_PRODUCT_RM500K 0x7001 @@ -1164,6 +1165,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10), .driver_info = ZLP }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200S_CN, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500K, 0xff, 0x00, 0x00) }, From 9be67a600828f2f0115970e02838daf41e140bcb Mon Sep 17 00:00:00 2001 From: Mohan Kumar Date: Tue, 13 Sep 2022 11:06:41 +0530 Subject: [PATCH 18/39] ALSA: hda/tegra: set depop delay for tegra commit 3c4d8c24fb6c44f426e447b04800b0ed61a7b5ae upstream. Reduce the suspend time by setting depop delay to 10ms for tegra. Signed-off-by: Mohan Kumar Cc: Link: https://lore.kernel.org/r/20220913053641.23299-1-mkumard@nvidia.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/pci/hda/patch_hdmi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index f7b5f980455a..d89c0a9982d1 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -3422,6 +3422,7 @@ static int patch_tegra_hdmi(struct hda_codec *codec) if (err) return err; + codec->depop_delay = 10; codec->patch_ops.build_pcms = tegra_hdmi_build_pcms; spec = codec->spec; spec->chmap.ops.chmap_cea_alloc_validate_get_type = From c1d1e4d065ea1854c5e0473607c9ccae6e56fb51 Mon Sep 17 00:00:00 2001 From: Kai Vehmanen Date: Mon, 12 Sep 2022 21:37:16 +0300 Subject: [PATCH 19/39] ALSA: hda: add Intel 5 Series / 3400 PCI DID commit 4d40ceef4745536289012670103c59264e0fb3ec upstream. Handle 0x3b57 variant with same AZX_DCAPS_INTEL_PCH_NOPM capabilities as 0x3b56. In practise this allow use of HDMI/DP display audio via i915. BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/2751 Signed-off-by: Kai Vehmanen Cc: Link: https://lore.kernel.org/r/20220912183716.2126312-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/pci/hda/hda_intel.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 2a3090ab80cf..8bab422bc141 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2567,6 +2567,8 @@ static const struct pci_device_id azx_ids[] = { /* 5 Series/3400 */ { PCI_DEVICE(0x8086, 0x3b56), .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_NOPM }, + { PCI_DEVICE(0x8086, 0x3b57), + .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_NOPM }, /* Poulsbo */ { PCI_DEVICE(0x8086, 0x811b), .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_BASE }, From a1d83a19cec3bfeb2b3547a1f7631e432a766d1c Mon Sep 17 00:00:00 2001 From: Chao Yu Date: Wed, 31 Aug 2022 22:54:54 +0800 Subject: [PATCH 20/39] mm/slub: fix to return errno if kmalloc() fails commit 7e9c323c52b379d261a72dc7bd38120a761a93cd upstream. In create_unique_id(), kmalloc(, GFP_KERNEL) can fail due to out-of-memory, if it fails, return errno correctly rather than triggering panic via BUG_ON(); kernel BUG at mm/slub.c:5893! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Call trace: sysfs_slab_add+0x258/0x260 mm/slub.c:5973 __kmem_cache_create+0x60/0x118 mm/slub.c:4899 create_cache mm/slab_common.c:229 [inline] kmem_cache_create_usercopy+0x19c/0x31c mm/slab_common.c:335 kmem_cache_create+0x1c/0x28 mm/slab_common.c:390 f2fs_kmem_cache_create fs/f2fs/f2fs.h:2766 [inline] f2fs_init_xattr_caches+0x78/0xb4 fs/f2fs/xattr.c:808 f2fs_fill_super+0x1050/0x1e0c fs/f2fs/super.c:4149 mount_bdev+0x1b8/0x210 fs/super.c:1400 f2fs_mount+0x44/0x58 fs/f2fs/super.c:4512 legacy_get_tree+0x30/0x74 fs/fs_context.c:610 vfs_get_tree+0x40/0x140 fs/super.c:1530 do_new_mount+0x1dc/0x4e4 fs/namespace.c:3040 path_mount+0x358/0x914 fs/namespace.c:3370 do_mount fs/namespace.c:3383 [inline] __do_sys_mount fs/namespace.c:3591 [inline] __se_sys_mount fs/namespace.c:3568 [inline] __arm64_sys_mount+0x2f8/0x408 fs/namespace.c:3568 Cc: Fixes: 81819f0fc8285 ("SLUB core") Reported-by: syzbot+81684812ea68216e08c5@syzkaller.appspotmail.com Reviewed-by: Muchun Song Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Signed-off-by: Chao Yu Acked-by: David Rientjes Signed-off-by: Vlastimil Babka Signed-off-by: Greg Kroah-Hartman --- mm/slub.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/mm/slub.c b/mm/slub.c index 0120ce3867b7..1a0c92ee8b99 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -5672,7 +5672,8 @@ static char *create_unique_id(struct kmem_cache *s) char *name = kmalloc(ID_STR_LENGTH, GFP_KERNEL); char *p = name; - BUG_ON(!name); + if (!name) + return ERR_PTR(-ENOMEM); *p++ = ':'; /* @@ -5752,6 +5753,8 @@ static int sysfs_slab_add(struct kmem_cache *s) * for the symlinks. */ name = create_unique_id(s); + if (IS_ERR(name)) + return PTR_ERR(name); } s->kobj.kset = kset; From 76cf1846427a21b4148d4aeba32816b499599b4c Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 27 Aug 2022 14:51:39 -0300 Subject: [PATCH 21/39] arm64: dts: rockchip: Remove 'enable-active-low' from rk3399-puma [ Upstream commit a994b34b9abb9c08ee09e835b4027ff2147f9d94 ] The 'enable-active-low' property is not a valid one. Only 'enable-active-high' is valid, and when this property is absent the gpio regulator will act as active low by default. Remove the invalid 'enable-active-low' property. Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM") Signed-off-by: Fabio Estevam Link: https://lore.kernel.org/r/20220827175140.1696699-1-festevam@denx.de Signed-off-by: Heiko Stuebner Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 70fe6013d17c..c5981b99f958 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -139,7 +139,6 @@ vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>; - enable-active-low; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_host_en>; regulator-name = "vcc5v0_host"; From 093e9aaf1d57f7cbab77c2cd655795d0339b3ea7 Mon Sep 17 00:00:00 2001 From: Igor Ryzhov Date: Wed, 5 Jun 2019 12:32:40 +0300 Subject: [PATCH 22/39] netfilter: nf_conntrack_sip: fix ct_sip_walk_headers [ Upstream commit 39aebedeaaa95757f5c1f2ddb5f43fdddbf478ca ] ct_sip_next_header and ct_sip_get_header return an absolute value of matchoff, not a shift from current dataoff. So dataoff should be assigned matchoff, not incremented by it. This issue can be seen in the scenario when there are multiple Contact headers and the first one is using a hostname and other headers use IP addresses. In this case, ct_sip_walk_headers will work as follows: The first ct_sip_get_header call to will find the first Contact header but will return -1 as the header uses a hostname. But matchoff will be changed to the offset of this header. After that, dataoff should be set to matchoff, so that the next ct_sip_get_header call find the next Contact header. But instead of assigning dataoff to matchoff, it is incremented by it, which is not correct, as matchoff is an absolute value of the offset. So on the next call to the ct_sip_get_header, dataoff will be incorrect, and the next Contact header may not be found at all. Fixes: 05e3ced297fe ("[NETFILTER]: nf_conntrack_sip: introduce SIP-URI parsing helper") Signed-off-by: Igor Ryzhov Signed-off-by: Florian Westphal Signed-off-by: Sasha Levin --- net/netfilter/nf_conntrack_sip.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c index 4dbb5bad4363..3b4c9407d6f2 100644 --- a/net/netfilter/nf_conntrack_sip.c +++ b/net/netfilter/nf_conntrack_sip.c @@ -471,7 +471,7 @@ static int ct_sip_walk_headers(const struct nf_conn *ct, const char *dptr, return ret; if (ret == 0) break; - dataoff += *matchoff; + dataoff = *matchoff; } *in_header = 0; } @@ -483,7 +483,7 @@ static int ct_sip_walk_headers(const struct nf_conn *ct, const char *dptr, break; if (ret == 0) return ret; - dataoff += *matchoff; + dataoff = *matchoff; } if (in_header) From dbd64cf46c8a1fd1970e7ab3ac381981e82d26c6 Mon Sep 17 00:00:00 2001 From: David Leadbeater Date: Fri, 26 Aug 2022 14:56:57 +1000 Subject: [PATCH 23/39] netfilter: nf_conntrack_irc: Tighten matching on DCC message [ Upstream commit e8d5dfd1d8747b56077d02664a8838c71ced948e ] CTCP messages should only be at the start of an IRC message, not anywhere within it. While the helper only decodes packes in the ORIGINAL direction, its possible to make a client send a CTCP message back by empedding one into a PING request. As-is, thats enough to make the helper believe that it saw a CTCP message. Fixes: 869f37d8e48f ("[NETFILTER]: nf_conntrack/nf_nat: add IRC helper port") Signed-off-by: David Leadbeater Signed-off-by: Florian Westphal Signed-off-by: Sasha Levin --- net/netfilter/nf_conntrack_irc.c | 34 ++++++++++++++++++++++++++------ 1 file changed, 28 insertions(+), 6 deletions(-) diff --git a/net/netfilter/nf_conntrack_irc.c b/net/netfilter/nf_conntrack_irc.c index 814220f7be67..27e2f9785e5f 100644 --- a/net/netfilter/nf_conntrack_irc.c +++ b/net/netfilter/nf_conntrack_irc.c @@ -150,15 +150,37 @@ static int help(struct sk_buff *skb, unsigned int protoff, data = ib_ptr; data_limit = ib_ptr + skb->len - dataoff; - /* strlen("\1DCC SENT t AAAAAAAA P\1\n")=24 - * 5+MINMATCHLEN+strlen("t AAAAAAAA P\1\n")=14 */ - while (data < data_limit - (19 + MINMATCHLEN)) { - if (memcmp(data, "\1DCC ", 5)) { + /* Skip any whitespace */ + while (data < data_limit - 10) { + if (*data == ' ' || *data == '\r' || *data == '\n') + data++; + else + break; + } + + /* strlen("PRIVMSG x ")=10 */ + if (data < data_limit - 10) { + if (strncasecmp("PRIVMSG ", data, 8)) + goto out; + data += 8; + } + + /* strlen(" :\1DCC SENT t AAAAAAAA P\1\n")=26 + * 7+MINMATCHLEN+strlen("t AAAAAAAA P\1\n")=26 + */ + while (data < data_limit - (21 + MINMATCHLEN)) { + /* Find first " :", the start of message */ + if (memcmp(data, " :", 2)) { data++; continue; } + data += 2; + + /* then check that place only for the DCC command */ + if (memcmp(data, "\1DCC ", 5)) + goto out; data += 5; - /* we have at least (19+MINMATCHLEN)-5 bytes valid data left */ + /* we have at least (21+MINMATCHLEN)-(2+5) bytes valid data left */ iph = ip_hdr(skb); pr_debug("DCC found in master %pI4:%u %pI4:%u\n", @@ -174,7 +196,7 @@ static int help(struct sk_buff *skb, unsigned int protoff, pr_debug("DCC %s detected\n", dccprotos[i]); /* we have at least - * (19+MINMATCHLEN)-5-dccprotos[i].matchlen bytes valid + * (21+MINMATCHLEN)-7-dccprotos[i].matchlen bytes valid * data left (== 14/13 bytes) */ if (parse_dcc(data, data_limit, &dcc_ip, &dcc_port, &addr_beg_p, &addr_end_p)) { From eadddf96525e5ae7219e9e9dc94130d099b84859 Mon Sep 17 00:00:00 2001 From: Brett Creeley Date: Thu, 1 Sep 2022 16:34:40 +0200 Subject: [PATCH 24/39] iavf: Fix cached head and tail value for iavf_get_tx_pending [ Upstream commit 809f23c0423a43266e47a7dc67e95b5cb4d1cbfc ] The underlying hardware may or may not allow reading of the head or tail registers and it really makes no difference if we use the software cached values. So, always used the software cached values. Fixes: 9c6c12595b73 ("i40e: Detection and recovery of TX queue hung logic moved to service_task from tx_timeout") Signed-off-by: Brett Creeley Co-developed-by: Norbert Zulinski Signed-off-by: Norbert Zulinski Signed-off-by: Mateusz Palczewski Tested-by: Konrad Jankowski Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin --- drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c index 4afdabbe95e8..d74a307da8f1 100644 --- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c @@ -138,8 +138,11 @@ u32 i40evf_get_tx_pending(struct i40e_ring *ring, bool in_sw) { u32 head, tail; + /* underlying hardware might not allow access and/or always return + * 0 for the head/tail registers so just use the cached values + */ head = ring->next_to_clean; - tail = readl(ring->tail); + tail = ring->next_to_use; if (head != tail) return (head < tail) ? From 25efdbe5fe542c3063d1948cc4e98abcb57621ca Mon Sep 17 00:00:00 2001 From: Lu Wei Date: Wed, 7 Sep 2022 18:12:04 +0800 Subject: [PATCH 25/39] ipvlan: Fix out-of-bound bugs caused by unset skb->mac_header [ Upstream commit 81225b2ea161af48e093f58e8dfee6d705b16af4 ] If an AF_PACKET socket is used to send packets through ipvlan and the default xmit function of the AF_PACKET socket is changed from dev_queue_xmit() to packet_direct_xmit() via setsockopt() with the option name of PACKET_QDISC_BYPASS, the skb->mac_header may not be reset and remains as the initial value of 65535, this may trigger slab-out-of-bounds bugs as following: ================================================================= UG: KASAN: slab-out-of-bounds in ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan] PU: 2 PID: 1768 Comm: raw_send Kdump: loaded Not tainted 6.0.0-rc4+ #6 ardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 all Trace: print_address_description.constprop.0+0x1d/0x160 print_report.cold+0x4f/0x112 kasan_report+0xa3/0x130 ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan] ipvlan_start_xmit+0x29/0xa0 [ipvlan] __dev_direct_xmit+0x2e2/0x380 packet_direct_xmit+0x22/0x60 packet_snd+0x7c9/0xc40 sock_sendmsg+0x9a/0xa0 __sys_sendto+0x18a/0x230 __x64_sys_sendto+0x74/0x90 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd The root cause is: 1. packet_snd() only reset skb->mac_header when sock->type is SOCK_RAW and skb->protocol is not specified as in packet_parse_headers() 2. packet_direct_xmit() doesn't reset skb->mac_header as dev_queue_xmit() In this case, skb->mac_header is 65535 when ipvlan_xmit_mode_l2() is called. So when ipvlan_xmit_mode_l2() gets mac header with eth_hdr() which use "skb->head + skb->mac_header", out-of-bound access occurs. This patch replaces eth_hdr() with skb_eth_hdr() in ipvlan_xmit_mode_l2() and reset mac header in multicast to solve this out-of-bound bug. Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Lu Wei Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ipvlan/ipvlan_core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ipvlan/ipvlan_core.c b/drivers/net/ipvlan/ipvlan_core.c index baf8aab59f82..71fd45137ee4 100644 --- a/drivers/net/ipvlan/ipvlan_core.c +++ b/drivers/net/ipvlan/ipvlan_core.c @@ -446,7 +446,6 @@ out: static int ipvlan_process_outbound(struct sk_buff *skb) { - struct ethhdr *ethh = eth_hdr(skb); int ret = NET_XMIT_DROP; /* The ipvlan is a pseudo-L2 device, so the packets that we receive @@ -456,6 +455,8 @@ static int ipvlan_process_outbound(struct sk_buff *skb) if (skb_mac_header_was_set(skb)) { /* In this mode we dont care about * multicast and broadcast traffic */ + struct ethhdr *ethh = eth_hdr(skb); + if (is_multicast_ether_addr(ethh->h_dest)) { pr_debug_ratelimited( "Dropped {multi|broad}cast of type=[%x]\n", @@ -534,7 +535,7 @@ out: static int ipvlan_xmit_mode_l2(struct sk_buff *skb, struct net_device *dev) { const struct ipvl_dev *ipvlan = netdev_priv(dev); - struct ethhdr *eth = eth_hdr(skb); + struct ethhdr *eth = skb_eth_hdr(skb); struct ipvl_addr *addr; void *lyr3h; int addr_type; @@ -558,6 +559,7 @@ static int ipvlan_xmit_mode_l2(struct sk_buff *skb, struct net_device *dev) return dev_forward_skb(ipvlan->phy_dev, skb); } else if (is_multicast_ether_addr(eth->h_dest)) { + skb_reset_mac_header(skb); ipvlan_skb_crossing_ns(skb, NULL); ipvlan_multicast_enqueue(ipvlan->port, skb, true); return NET_XMIT_SUCCESS; From 231a350c3c8062d3c6ca48cdd9e3c09c20020871 Mon Sep 17 00:00:00 2001 From: Benjamin Poirier Date: Wed, 7 Sep 2022 16:56:41 +0900 Subject: [PATCH 26/39] net: team: Unsync device addresses on ndo_stop [ Upstream commit bd60234222b2fd5573526da7bcd422801f271f5f ] Netdev drivers are expected to call dev_{uc,mc}_sync() in their ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method. This is mentioned in the kerneldoc for those dev_* functions. The team driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have already been emptied in unregister_netdevice_many() before ndo_uninit is called. This mistake can result in addresses being leftover on former team ports after a team device has been deleted; see test_LAG_cleanup() in the last patch in this series. Add unsync calls at their expected location, team_close(). v3: * When adding or deleting a port, only sync/unsync addresses if the team device is up. In other cases, it is taken care of at the right time by ndo_open/ndo_set_rx_mode/ndo_stop. Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Signed-off-by: Benjamin Poirier Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/team/team.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index eb2360b64aad..c7c1ff419d75 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -1274,10 +1274,12 @@ static int team_port_add(struct team *team, struct net_device *port_dev) } } - netif_addr_lock_bh(dev); - dev_uc_sync_multiple(port_dev, dev); - dev_mc_sync_multiple(port_dev, dev); - netif_addr_unlock_bh(dev); + if (dev->flags & IFF_UP) { + netif_addr_lock_bh(dev); + dev_uc_sync_multiple(port_dev, dev); + dev_mc_sync_multiple(port_dev, dev); + netif_addr_unlock_bh(dev); + } port->index = -1; list_add_tail_rcu(&port->list, &team->port_list); @@ -1348,8 +1350,10 @@ static int team_port_del(struct team *team, struct net_device *port_dev) netdev_rx_handler_unregister(port_dev); team_port_disable_netpoll(port); vlan_vids_del_by_dev(port_dev, dev); - dev_uc_unsync(port_dev, dev); - dev_mc_unsync(port_dev, dev); + if (dev->flags & IFF_UP) { + dev_uc_unsync(port_dev, dev); + dev_mc_unsync(port_dev, dev); + } dev_close(port_dev); team_port_leave(team, port); @@ -1697,6 +1701,14 @@ static int team_open(struct net_device *dev) static int team_close(struct net_device *dev) { + struct team *team = netdev_priv(dev); + struct team_port *port; + + list_for_each_entry(port, &team->port_list, list) { + dev_uc_unsync(port->dev, dev); + dev_mc_unsync(port->dev, dev); + } + return 0; } From 3cb424fce4385ee011f5d229c5b06bf71b8dedef Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 17 Sep 2022 16:25:40 -0700 Subject: [PATCH 27/39] MIPS: lantiq: export clk_get_io() for lantiq_wdt.ko [ Upstream commit 502550123bee6a2ffa438409b5b9aad4d6db3a8c ] The lantiq WDT driver uses clk_get_io(), which is not exported, so export it to fix a build error: ERROR: modpost: "clk_get_io" [drivers/watchdog/lantiq_wdt.ko] undefined! Fixes: 287e3f3f4e68 ("MIPS: lantiq: implement support for clkdev api") Signed-off-by: Randy Dunlap Reported-by: kernel test robot Cc: Thomas Bogendoerfer Cc: John Crispin Cc: linux-mips@vger.kernel.org Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin --- arch/mips/lantiq/clk.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c index f5fab99d1751..851f6bf925a6 100644 --- a/arch/mips/lantiq/clk.c +++ b/arch/mips/lantiq/clk.c @@ -52,6 +52,7 @@ struct clk *clk_get_io(void) { return &cpu_clk_generic[2]; } +EXPORT_SYMBOL_GPL(clk_get_io); struct clk *clk_get_ppe(void) { From 99959eb399671d16bd4ec06bd33cab1adf1e1869 Mon Sep 17 00:00:00 2001 From: Liang He Date: Tue, 13 Sep 2022 20:56:59 +0800 Subject: [PATCH 28/39] of: mdio: Add of_node_put() when breaking out of for_each_xx [ Upstream commit 1c48709e6d9d353acaaac1d8e33474756b121d78 ] In of_mdiobus_register(), we should call of_node_put() for 'child' escaped out of for_each_available_child_of_node(). Fixes: 66bdede495c7 ("of_mdio: Fix broken PHY IRQ in case of probe deferral") Co-developed-by: Miaoqian Lin Signed-off-by: Miaoqian Lin Signed-off-by: Liang He Link: https://lore.kernel.org/r/20220913125659.3331969-1-windhl@126.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- drivers/of/of_mdio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c index 8b7d3e64b8ca..41a23db21392 100644 --- a/drivers/of/of_mdio.c +++ b/drivers/of/of_mdio.c @@ -272,6 +272,7 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np) return 0; unregister: + of_node_put(child); mdiobus_unregister(mdio); return rc; } From 754e8b74281dd54a324698803483f47cf3355ae1 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Tue, 20 Sep 2022 14:20:17 +0200 Subject: [PATCH 29/39] netfilter: ebtables: fix memory leak when blob is malformed [ Upstream commit 62ce44c4fff947eebdf10bb582267e686e6835c9 ] The bug fix was incomplete, it "replaced" crash with a memory leak. The old code had an assignment to "ret" embedded into the conditional, restore this. Fixes: 7997eff82828 ("netfilter: ebtables: reject blobs that don't provide all entry points") Reported-and-tested-by: syzbot+a24c5252f3e3ab733464@syzkaller.appspotmail.com Signed-off-by: Florian Westphal Signed-off-by: Sasha Levin --- net/bridge/netfilter/ebtables.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c index a54149f10f7e..84d4b4a0b053 100644 --- a/net/bridge/netfilter/ebtables.c +++ b/net/bridge/netfilter/ebtables.c @@ -991,8 +991,10 @@ static int do_replace_finish(struct net *net, struct ebt_replace *repl, goto free_iterate; } - if (repl->valid_hooks != t->valid_hooks) + if (repl->valid_hooks != t->valid_hooks) { + ret = -EINVAL; goto free_unlock; + } if (repl->num_counters && repl->num_counters != t->private->nentries) { ret = -EINVAL; From febce6921450ecf6dcc6c7272a3709994be49953 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Tue, 20 Sep 2022 11:40:56 +0200 Subject: [PATCH 30/39] can: gs_usb: gs_can_open(): fix race dev->can.state condition [ Upstream commit 5440428b3da65408dba0241985acb7a05258b85e ] The dev->can.state is set to CAN_STATE_ERROR_ACTIVE, after the device has been started. On busy networks the CAN controller might receive CAN frame between and go into an error state before the dev->can.state is assigned. Assign dev->can.state before starting the controller to close the race window. Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/20220920195216.232481-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin --- drivers/net/can/usb/gs_usb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/usb/gs_usb.c b/drivers/net/can/usb/gs_usb.c index 31c1dc0aa5cf..5e21486baa22 100644 --- a/drivers/net/can/usb/gs_usb.c +++ b/drivers/net/can/usb/gs_usb.c @@ -686,6 +686,7 @@ static int gs_can_open(struct net_device *netdev) flags |= GS_CAN_MODE_TRIPLE_SAMPLE; /* finally start device */ + dev->can.state = CAN_STATE_ERROR_ACTIVE; dm->mode = cpu_to_le32(GS_CAN_MODE_START); dm->flags = cpu_to_le32(flags); rc = usb_control_msg(interface_to_usbdev(dev->iface), @@ -702,13 +703,12 @@ static int gs_can_open(struct net_device *netdev) if (rc < 0) { netdev_err(netdev, "Couldn't start device (err=%d)\n", rc); kfree(dm); + dev->can.state = CAN_STATE_STOPPED; return rc; } kfree(dm); - dev->can.state = CAN_STATE_ERROR_ACTIVE; - parent->active_channels++; if (!(dev->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)) netif_start_queue(netdev); From bbe69615b5cb0b63275c86d31d57d2c24a25e265 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Wed, 14 Sep 2022 15:24:29 +0300 Subject: [PATCH 31/39] perf kcore_copy: Do not check /proc/modules is unchanged [ Upstream commit 5b427df27b94aec1312cace48a746782a0925c53 ] /proc/kallsyms and /proc/modules are compared before and after the copy in order to ensure no changes during the copy. However /proc/modules also might change due to reference counts changing even though that does not make any difference. Any modules loaded or unloaded should be visible in changes to kallsyms, so it is not necessary to check /proc/modules also anyway. Remove the comparison checking that /proc/modules is unchanged. Fixes: fc1b691d7651d949 ("perf buildid-cache: Add ability to add kcore to the cache") Reported-by: Daniel Dao Signed-off-by: Adrian Hunter Tested-by: Daniel Dao Acked-by: Namhyung Kim Cc: Ian Rogers Cc: Jiri Olsa Link: https://lore.kernel.org/r/20220914122429.8770-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin --- tools/perf/util/symbol-elf.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c index a0a4afa7e678..866a61d66251 100644 --- a/tools/perf/util/symbol-elf.c +++ b/tools/perf/util/symbol-elf.c @@ -1693,8 +1693,8 @@ static int kcore_copy__compare_file(const char *from_dir, const char *to_dir, * unusual. One significant peculiarity is that the mapping (start -> pgoff) * is not the same for the kernel map and the modules map. That happens because * the data is copied adjacently whereas the original kcore has gaps. Finally, - * kallsyms and modules files are compared with their copies to check that - * modules have not been loaded or unloaded while the copies were taking place. + * kallsyms file is compared with its copy to check that modules have not been + * loaded or unloaded while the copies were taking place. * * Return: %0 on success, %-1 on failure. */ @@ -1757,9 +1757,6 @@ int kcore_copy(const char *from_dir, const char *to_dir) kci.modules_map.len)) goto out_extract_close; - if (kcore_copy__compare_file(from_dir, to_dir, "modules")) - goto out_extract_close; - if (kcore_copy__compare_file(from_dir, to_dir, "kallsyms")) goto out_extract_close; From b2275bc08a098cb7c8b8744020f1782d29c722bb Mon Sep 17 00:00:00 2001 From: Sean Anderson Date: Tue, 20 Sep 2022 19:50:18 -0400 Subject: [PATCH 32/39] net: sunhme: Fix packet reception for len < RX_COPY_THRESHOLD [ Upstream commit 878e2405710aacfeeb19364c300f38b7a9abfe8f ] There is a separate receive path for small packets (under 256 bytes). Instead of allocating a new dma-capable skb to be used for the next packet, this path allocates a skb and copies the data into it (reusing the existing sbk for the next packet). There are two bytes of junk data at the beginning of every packet. I believe these are inserted in order to allow aligned DMA and IP headers. We skip over them using skb_reserve. Before copying over the data, we must use a barrier to ensure we see the whole packet. The current code only synchronizes len bytes, starting from the beginning of the packet, including the junk bytes. However, this leaves off the final two bytes in the packet. Synchronize the whole packet. To reproduce this problem, ping a HME with a payload size between 17 and 214 $ ping -s 17 which will complain rather loudly about the data mismatch. Small packets (below 60 bytes on the wire) do not have this issue. I suspect this is related to the padding added to increase the minimum packet size. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Sean Anderson Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20220920235018.1675956-1-seanga2@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- drivers/net/ethernet/sun/sunhme.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/sun/sunhme.c b/drivers/net/ethernet/sun/sunhme.c index 7522f277e912..bfa8c0424913 100644 --- a/drivers/net/ethernet/sun/sunhme.c +++ b/drivers/net/ethernet/sun/sunhme.c @@ -2065,9 +2065,9 @@ static void happy_meal_rx(struct happy_meal *hp, struct net_device *dev) skb_reserve(copy_skb, 2); skb_put(copy_skb, len); - dma_sync_single_for_cpu(hp->dma_dev, dma_addr, len, DMA_FROM_DEVICE); + dma_sync_single_for_cpu(hp->dma_dev, dma_addr, len + 2, DMA_FROM_DEVICE); skb_copy_from_linear_data(skb, copy_skb->data, len); - dma_sync_single_for_device(hp->dma_dev, dma_addr, len, DMA_FROM_DEVICE); + dma_sync_single_for_device(hp->dma_dev, dma_addr, len + 2, DMA_FROM_DEVICE); /* Reuse original ring buffer. */ hme_write_rxd(hp, this, (RXFLAG_OWN|((RX_BUF_ALLOC_SIZE-RX_OFFSET)<<16)), From db368ec263e8123de24f9efc7d1f4de3282e16b5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Thu, 1 Sep 2022 17:39:32 +0300 Subject: [PATCH 33/39] serial: Create uart_xmit_advance() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit e77cab77f2cb3a1ca2ba8df4af45bb35617ac16d upstream. A very common pattern in the drivers is to advance xmit tail index and do bookkeeping of Tx'ed characters. Create uart_xmit_advance() to handle it. Reviewed-by: Andy Shevchenko Cc: stable Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220901143934.8850-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- include/linux/serial_core.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index b2a7b7c15451..95d1ffede87f 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -298,6 +298,23 @@ struct uart_state { /* number of characters left in xmit buffer before we ask for more */ #define WAKEUP_CHARS 256 +/** + * uart_xmit_advance - Advance xmit buffer and account Tx'ed chars + * @up: uart_port structure describing the port + * @chars: number of characters sent + * + * This function advances the tail of circular xmit buffer by the number of + * @chars transmitted and handles accounting of transmitted bytes (into + * @up's icount.tx). + */ +static inline void uart_xmit_advance(struct uart_port *up, unsigned int chars) +{ + struct circ_buf *xmit = &up->state->xmit; + + xmit->tail = (xmit->tail + chars) & (UART_XMIT_SIZE - 1); + up->icount.tx += chars; +} + struct module; struct tty_driver; From c99ba48d4311a121f82073cd8d5e1275110de13d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Thu, 1 Sep 2022 17:39:33 +0300 Subject: [PATCH 34/39] serial: tegra: Use uart_xmit_advance(), fixes icount.tx accounting MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 754f68044c7dd6c52534ba3e0f664830285c4b15 upstream. DMA complete & stop paths did not correctly account Tx'ed characters into icount.tx. Using uart_xmit_advance() fixes the problem. Fixes: e9ea096dd225 ("serial: tegra: add serial driver") Cc: # serial: Create uart_xmit_advance() Reviewed-by: Andy Shevchenko Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220901143934.8850-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial-tegra.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c index cf9b736f26f8..a13d6d4674bc 100644 --- a/drivers/tty/serial/serial-tegra.c +++ b/drivers/tty/serial/serial-tegra.c @@ -409,7 +409,7 @@ static void tegra_uart_tx_dma_complete(void *args) count = tup->tx_bytes_requested - state.residue; async_tx_ack(tup->tx_dma_desc); spin_lock_irqsave(&tup->uport.lock, flags); - xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); + uart_xmit_advance(&tup->uport, count); tup->tx_in_progress = 0; if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&tup->uport); @@ -493,7 +493,6 @@ static unsigned int tegra_uart_tx_empty(struct uart_port *u) static void tegra_uart_stop_tx(struct uart_port *u) { struct tegra_uart_port *tup = to_tegra_uport(u); - struct circ_buf *xmit = &tup->uport.state->xmit; struct dma_tx_state state; unsigned int count; @@ -504,7 +503,7 @@ static void tegra_uart_stop_tx(struct uart_port *u) dmaengine_tx_status(tup->tx_dma_chan, tup->tx_cookie, &state); count = tup->tx_bytes_requested - state.residue; async_tx_ack(tup->tx_dma_desc); - xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1); + uart_xmit_advance(&tup->uport, count); tup->tx_in_progress = 0; } From 49f401a98b318761ca2e15d4c7869a20043fbed4 Mon Sep 17 00:00:00 2001 From: Stefan Haberland Date: Mon, 19 Sep 2022 17:49:31 +0200 Subject: [PATCH 35/39] s390/dasd: fix Oops in dasd_alias_get_start_dev due to missing pavgroup commit db7ba07108a48c0f95b74fabbfd5d63e924f992d upstream. Fix Oops in dasd_alias_get_start_dev() function caused by the pavgroup pointer being NULL. The pavgroup pointer is checked on the entrance of the function but without the lcu->lock being held. Therefore there is a race window between dasd_alias_get_start_dev() and _lcu_update() which sets pavgroup to NULL with the lcu->lock held. Fix by checking the pavgroup pointer with lcu->lock held. Cc: # 2.6.25+ Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1") Signed-off-by: Stefan Haberland Reviewed-by: Jan Hoeppner Link: https://lore.kernel.org/r/20220919154931.4123002-2-sth@linux.ibm.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman --- drivers/s390/block/dasd_alias.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c index 0f70cae1c01e..a5c60211edbf 100644 --- a/drivers/s390/block/dasd_alias.c +++ b/drivers/s390/block/dasd_alias.c @@ -675,12 +675,12 @@ int dasd_alias_remove_device(struct dasd_device *device) struct dasd_device *dasd_alias_get_start_dev(struct dasd_device *base_device) { struct dasd_eckd_private *alias_priv, *private = base_device->private; - struct alias_pav_group *group = private->pavgroup; struct alias_lcu *lcu = private->lcu; struct dasd_device *alias_device; + struct alias_pav_group *group; unsigned long flags; - if (!group || !lcu) + if (!lcu) return NULL; if (lcu->pav == NO_PAV || lcu->flags & (NEED_UAC_UPDATE | UPDATE_PENDING)) @@ -697,6 +697,11 @@ struct dasd_device *dasd_alias_get_start_dev(struct dasd_device *base_device) } spin_lock_irqsave(&lcu->lock, flags); + group = private->pavgroup; + if (!group) { + spin_unlock_irqrestore(&lcu->lock, flags); + return NULL; + } alias_device = group->next; if (!alias_device) { if (list_empty(&group->aliaslist)) { From 7c308ecae736fea5e68a2a54ae8fb1e0e4f5e4d0 Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Sat, 27 Aug 2022 15:03:45 +0200 Subject: [PATCH 36/39] Drivers: hv: Never allocate anything besides framebuffer from framebuffer memory region [ Upstream commit f0880e2cb7e1f8039a048fdd01ce45ab77247221 ] Passed through PCI device sometimes misbehave on Gen1 VMs when Hyper-V DRM driver is also loaded. Looking at IOMEM assignment, we can see e.g. $ cat /proc/iomem ... f8000000-fffbffff : PCI Bus 0000:00 f8000000-fbffffff : 0000:00:08.0 f8000000-f8001fff : bb8c4f33-2ba2-4808-9f7f-02f3b4da22fe ... fe0000000-fffffffff : PCI Bus 0000:00 fe0000000-fe07fffff : bb8c4f33-2ba2-4808-9f7f-02f3b4da22fe fe0000000-fe07fffff : 2ba2:00:02.0 fe0000000-fe07fffff : mlx4_core the interesting part is the 'f8000000' region as it is actually the VM's framebuffer: $ lspci -v ... 0000:00:08.0 VGA compatible controller: Microsoft Corporation Hyper-V virtual VGA (prog-if 00 [VGA controller]) Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at f8000000 (32-bit, non-prefetchable) [size=64M] ... hv_vmbus: registering driver hyperv_drm hyperv_drm 5620e0c7-8062-4dce-aeb7-520c7ef76171: [drm] Synthvid Version major 3, minor 5 hyperv_drm 0000:00:08.0: vgaarb: deactivate vga console hyperv_drm 0000:00:08.0: BAR 0: can't reserve [mem 0xf8000000-0xfbffffff] hyperv_drm 5620e0c7-8062-4dce-aeb7-520c7ef76171: [drm] Cannot request framebuffer, boot fb still active? Note: "Cannot request framebuffer" is not a fatal error in hyperv_setup_gen1() as the code assumes there's some other framebuffer device there but we actually have some other PCI device (mlx4 in this case) config space there! The problem appears to be that vmbus_allocate_mmio() can use dedicated framebuffer region to serve any MMIO request from any device. The semantics one might assume of a parameter named "fb_overlap_ok" aren't implemented because !fb_overlap_ok essentially has no effect. The existing semantics are really "prefer_fb_overlap". This patch implements the expected and needed semantics, which is to not allocate from the frame buffer space when !fb_overlap_ok. Note, Gen2 VMs are usually unaffected by the issue because framebuffer region is already taken by EFI fb (in case kernel supports it) but Gen1 VMs may have this region unclaimed by the time Hyper-V PCI pass-through driver tries allocating MMIO space if Hyper-V DRM/FB drivers load after it. Devices can be brought up in any sequence so let's resolve the issue by always ignoring 'fb_mmio' region for non-FB requests, even if the region is unclaimed. Reviewed-by: Michael Kelley Signed-off-by: Vitaly Kuznetsov Link: https://lore.kernel.org/r/20220827130345.1320254-4-vkuznets@redhat.com Signed-off-by: Wei Liu Signed-off-by: Sasha Levin --- drivers/hv/vmbus_drv.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c index cdf7d39362fd..1c09b1a787f6 100644 --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -1426,7 +1426,7 @@ int vmbus_allocate_mmio(struct resource **new, struct hv_device *device_obj, bool fb_overlap_ok) { struct resource *iter, *shadow; - resource_size_t range_min, range_max, start; + resource_size_t range_min, range_max, start, end; const char *dev_n = dev_name(&device_obj->device); int retval; @@ -1461,6 +1461,14 @@ int vmbus_allocate_mmio(struct resource **new, struct hv_device *device_obj, range_max = iter->end; start = (range_min + align - 1) & ~(align - 1); for (; start + size - 1 <= range_max; start += align) { + end = start + size - 1; + + /* Skip the whole fb_mmio region if not fb_overlap_ok */ + if (!fb_overlap_ok && fb_mmio && + (((start >= fb_mmio->start) && (start <= fb_mmio->end)) || + ((end >= fb_mmio->start) && (end <= fb_mmio->end)))) + continue; + shadow = __request_region(iter, start, size, NULL, IORESOURCE_BUSY); if (!shadow) From 1f6ab281f218c3a2b789eb976c5b1ef67139680a Mon Sep 17 00:00:00 2001 From: Dongliang Mu Date: Sat, 22 Jan 2022 15:44:59 +0800 Subject: [PATCH 37/39] media: em28xx: initialize refcount before kref_get commit c08eadca1bdfa099e20a32f8fa4b52b2f672236d upstream. The commit 47677e51e2a4("[media] em28xx: Only deallocate struct em28xx after finishing all extensions") adds kref_get to many init functions (e.g., em28xx_audio_init). However, kref_init is called too late in em28xx_usb_probe, since em28xx_init_dev before will invoke those init functions and call kref_get function. Then refcount bug occurs in my local syzkaller instance. Fix it by moving kref_init before em28xx_init_dev. This issue occurs not only in dev but also dev->dev_next. Fixes: 47677e51e2a4 ("[media] em28xx: Only deallocate struct em28xx after finishing all extensions") Reported-by: syzkaller Signed-off-by: Dongliang Mu Signed-off-by: Hans Verkuil [DP: drop changes related to dev->dev_next as second tuner functionality was added in 4.16] Signed-off-by: Dragos-Marian Panait Signed-off-by: Greg Kroah-Hartman --- drivers/media/usb/em28xx/em28xx-cards.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c index b736c027a0bd..23a9fe8d9d1e 100644 --- a/drivers/media/usb/em28xx/em28xx-cards.c +++ b/drivers/media/usb/em28xx/em28xx-cards.c @@ -3644,6 +3644,8 @@ static int em28xx_usb_probe(struct usb_interface *interface, goto err_free; } + kref_init(&dev->ref); + dev->devno = nr; dev->model = id->driver_info; dev->alt = -1; @@ -3730,8 +3732,6 @@ static int em28xx_usb_probe(struct usb_interface *interface, dev->dvb_xfer_bulk ? "bulk" : "isoc"); } - kref_init(&dev->ref); - request_modules(dev); /* From b9fad99ffb59260c3352ccfbf466581f3899e1f6 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Thu, 8 Sep 2022 11:21:26 +0200 Subject: [PATCH 38/39] ext4: make directory inode spreading reflect flexbg size commit 613c5a85898d1cd44e68f28d65eccf64a8ace9cf upstream. Currently the Orlov inode allocator searches for free inodes for a directory only in flex block groups with at most inodes_per_group/16 more directory inodes than average per flex block group. However with growing size of flex block group this becomes unnecessarily strict. Scale allowed difference from average directory count per flex block group with flex block group size as we do with other metrics. Tested-by: Stefan Wahren Tested-by: Ojaswin Mujoo Cc: stable@kernel.org Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/ Signed-off-by: Jan Kara Link: https://lore.kernel.org/r/20220908092136.11770-3-jack@suse.cz Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman --- fs/ext4/ialloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c index e6520627a84a..e45398c323ee 100644 --- a/fs/ext4/ialloc.c +++ b/fs/ext4/ialloc.c @@ -513,7 +513,7 @@ static int find_group_orlov(struct super_block *sb, struct inode *parent, goto fallback; } - max_dirs = ndirs / ngroups + inodes_per_group / 16; + max_dirs = ndirs / ngroups + inodes_per_group*flex_size / 16; min_inodes = avefreei - inodes_per_group*flex_size / 4; if (min_inodes < 1) min_inodes = 1; From 9d5c0b3a8e1a8b6c4969f630803103978e8d17b6 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 28 Sep 2022 10:56:52 +0200 Subject: [PATCH 39/39] Linux 4.14.295 Link: https://lore.kernel.org/r/20220926100738.148626940@linuxfoundation.org Link: https://lore.kernel.org/r/20220926163535.997144838@linuxfoundation.org Tested-by: Linux Kernel Functional Testing Tested-by: Guenter Roeck Tested-by: Jon Hunter Signed-off-by: Greg Kroah-Hartman --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 222468241414..74c0d3f17293 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 VERSION = 4 PATCHLEVEL = 14 -SUBLEVEL = 294 +SUBLEVEL = 295 EXTRAVERSION = NAME = Petit Gorille