commit b1a37ed00d7908a991c1d0f18a8cba3c2aa99bdc upstream.
Presently, when a report is processed, its proposed size, provided by
the user of the API (as Report Size * Report Count) is compared against
the subsystem default HID_MAX_BUFFER_SIZE (16k). However, some
low-level HID drivers allocate a reduced amount of memory to their
buffers (e.g. UHID only allocates UHID_DATA_MAX (4k) buffers), rending
this check inadequate in some cases.
In these circumstances, if the received report ends up being smaller
than the proposed report size, the remainder of the buffer is zeroed.
That is, the space between sizeof(csize) (size of the current report)
and the rsize (size proposed i.e. Report Size * Report Count), which can
be handled up to HID_MAX_BUFFER_SIZE (16k). Meaning that memset()
shoots straight past the end of the buffer boundary and starts zeroing
out in-use values, often resulting in calamity.
This patch introduces a new variable into 'struct hid_ll_driver' where
individual low-level drivers can over-ride the default maximum value of
HID_MAX_BUFFER_SIZE (16k) with something more sympathetic to the
interface.
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
[Lee: Backported to v4.14.y]
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes in 4.14.238
net: ieee802154: fix null deref in parse dev addr
HID: hid-sensor-hub: Return error for hid_set_field() failure
HID: Add BUS_VIRTUAL to hid_connect logging
HID: usbhid: fix info leak in hid_submit_ctrl
ARM: OMAP2+: Fix build warning when mmc_omap is not built
HID: gt683r: add missing MODULE_DEVICE_TABLE
gfs2: Fix use-after-free in gfs2_glock_shrink_scan
scsi: target: core: Fix warning on realtime kernels
ethernet: myri10ge: Fix missing error code in myri10ge_probe()
nvme-loop: reset queue count to 1 in nvme_loop_destroy_io_queues()
nvme-loop: clear NVME_LOOP_Q_LIVE when nvme_loop_configure_admin_queue() fails
nvme-loop: check for NVME_LOOP_Q_LIVE in nvme_loop_destroy_admin_queue()
net: ipconfig: Don't override command-line hostnames or domains
rtnetlink: Fix missing error code in rtnl_bridge_notify()
net/x25: Return the correct errno code
net: Return the correct errno code
fib: Return the correct errno code
dmaengine: ALTERA_MSGDMA depends on HAS_IOMEM
dmaengine: QCOM_HIDMA_MGMT depends on HAS_IOMEM
dmaengine: stedma40: add missing iounmap() on error in d40_probe()
mm/memory-failure: make sure wait for page writeback in memory_failure
batman-adv: Avoid WARN_ON timing related checks
net: ipv4: fix memory leak in netlbl_cipsov4_add_std
net: rds: fix memory leak in rds_recvmsg
udp: fix race between close() and udp_abort()
rtnetlink: Fix regression in bridge VLAN configuration
netfilter: synproxy: Fix out of bounds when parsing TCP options
alx: Fix an error handling path in 'alx_probe()'
net: stmmac: dwmac1000: Fix extended MAC address registers definition
qlcnic: Fix an error handling path in 'qlcnic_probe()'
netxen_nic: Fix an error handling path in 'netxen_nic_probe()'
net: cdc_ncm: switch to eth%d interface naming
net: usb: fix possible use-after-free in smsc75xx_bind
net: ipv4: fix memory leak in ip_mc_add1_src
net/af_unix: fix a data-race in unix_dgram_sendmsg / unix_release_sock
be2net: Fix an error handling path in 'be_probe()'
net: hamradio: fix memory leak in mkiss_close
net: cdc_eem: fix tx fixup skb leak
icmp: don't send out ICMP messages with a source address of 0.0.0.0
net: ethernet: fix potential use-after-free in ec_bhf_remove
radeon: use memcpy_to/fromio for UVD fw upload
hwmon: (scpi-hwmon) shows the negative temperature properly
can: bcm: fix infoleak in struct bcm_msg_head
can: mcba_usb: fix memory leak in mcba_usb
usb: core: hub: Disable autosuspend for Cypress CY7C65632
tracing: Do not stop recording cmdlines when tracing is off
tracing: Do not stop recording comms if the trace file is being read
tracing: Do no increment trace_clock_global() by one
PCI: Mark TI C667X to avoid bus reset
PCI: Mark some NVIDIA GPUs to avoid bus reset
PCI: Add ACS quirk for Broadcom BCM57414 NIC
PCI: Work around Huawei Intelligent NIC VF FLR erratum
ARCv2: save ABI registers across signal handling
dmaengine: pl330: fix wrong usage of spinlock flags in dma_cyclc
net: bridge: fix vlan tunnel dst null pointer dereference
net: bridge: fix vlan tunnel dst refcnt when egressing
mm/slub.c: include swab.h
net: fec_ptp: add clock rate zero check
can: bcm/raw/isotp: use per module netdevice notifier
inet: use bigger hash table for IP ID generation
usb: dwc3: core: fix kernel panic when do reboot
kernfs: deal with kernfs_fill_super() failures
unfuck sysfs_mount()
x86/fpu: Reset state for all signal restore failures
drm/nouveau: wait for moving fence after pinning v2
drm/radeon: wait for moving fence after pinning
ARM: 9081/1: fix gcc-10 thumb2-kernel regression
Makefile: Move -Wno-unused-but-set-variable out of GCC only block
MIPS: generic: Update node names to avoid unit addresses
arm64: perf: Disable PMU while processing counter overflows
Revert "PCI: PM: Do not read power state in pci_enable_device_flags()"
mac80211: remove warning in ieee80211_get_sband()
cfg80211: call cfg80211_leave_ocb when switching away from OCB
mac80211: drop multicast fragments
ping: Check return value of function 'ping_queue_rcv_skb'
inet: annotate date races around sk->sk_txhash
net: caif: fix memory leak in ldisc_open
net/packet: annotate accesses to po->bind
net/packet: annotate accesses to po->ifindex
r8152: Avoid memcpy() over-reading of ETH_SS_STATS
sh_eth: Avoid memcpy() over-reading of ETH_SS_STATS
r8169: Avoid memcpy() over-reading of ETH_SS_STATS
net: qed: Fix memcpy() overflow of qed_dcbx_params()
net: ll_temac: Avoid ndo_start_xmit returning NETDEV_TX_BUSY
pinctrl: stm32: fix the reported number of GPIO lines per bank
nilfs2: fix memory leak in nilfs_sysfs_delete_device_group
i2c: robotfuzz-osif: fix control-request directions
Linux 4.14.238
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: If0fafb89548f179bcf4114cc962164be23717637
[ Upstream commit 6be388f4a35d2ce5ef7dbf635a8964a5da7f799f ]
In hid_submit_ctrl(), the way of calculating the report length doesn't
take into account that report->size can be zero. When running the
syzkaller reproducer, a report of size 0 causes hid_submit_ctrl) to
calculate transfer_buffer_length as 16384. When this urb is passed to
the usb core layer, KMSAN reports an info leak of 16384 bytes.
To fix this, first modify hid_report_len() to account for the zero
report size case by using DIV_ROUND_UP for the division. Then, call it
from hid_submit_ctrl().
Reported-by: syzbot+7c2bb71996f95a82524c@syzkaller.appspotmail.com
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Changes in 4.14.233
usbip: vudc synchronize sysfs code paths
ACPI: tables: x86: Reserve memory occupied by ACPI tables
ACPI: x86: Call acpi_boot_table_init() after acpi_table_upgrade()
bpf: Fix backport of "bpf: restrict unknown scalars of mixed signed bounds for unprivileged"
bpf: fix up selftests after backports were fixed
net: usb: ax88179_178a: initialize local variables before use
iwlwifi: Fix softirq/hardirq disabling in iwl_pcie_enqueue_hcmd()
MIPS: Introduce isa-rev.h to define MIPS_ISA_REV
MIPS: cpu-features.h: Replace __mips_isa_rev with MIPS_ISA_REV
mips: Do not include hi and lo in clobber list for R6
bpf: Fix masking negation logic upon negative dst register
iwlwifi: Fix softirq/hardirq disabling in iwl_pcie_gen2_enqueue_hcmd()
ALSA: usb-audio: Add MIDI quirk for Vox ToneLab EX
USB: Add LPM quirk for Lenovo ThinkPad USB-C Dock Gen2 Ethernet
USB: Add reset-resume quirk for WD19's Realtek Hub
platform/x86: thinkpad_acpi: Correct thermal sensor allocation
s390/disassembler: increase ebpf disasm buffer size
ACPI: custom_method: fix potential use-after-free issue
ACPI: custom_method: fix a possible memory leak
arm64: dts: mt8173: fix property typo of 'phys' in dsi node
ecryptfs: fix kernel panic with null dev_name
spi: spi-ti-qspi: Free DMA resources
mmc: block: Update ext_csd.cache_ctrl if it was written
mmc: core: Do a power cycle when the CMD11 fails
mmc: core: Set read only for SD cards with permanent write protect bit
cifs: Return correct error code from smb2_get_enc_key
btrfs: fix metadata extent leak after failure to create subvolume
intel_th: pci: Add Rocket Lake CPU support
fbdev: zero-fill colormap in fbcmap.c
staging: wimax/i2400m: fix byte-order issue
crypto: api - check for ERR pointers in crypto_destroy_tfm()
usb: gadget: uvc: add bInterval checking for HS mode
usb: gadget: f_uac1: validate input parameters
usb: dwc3: gadget: Ignore EP queue requests during bus reset
usb: xhci: Fix port minor revision
PCI: PM: Do not read power state in pci_enable_device_flags()
x86/build: Propagate $(CLANG_FLAGS) to $(REALMODE_FLAGS)
tee: optee: do not check memref size on return from Secure World
perf/arm_pmu_platform: Fix error handling
spi: dln2: Fix reference leak to master
spi: omap-100k: Fix reference leak to master
intel_th: Consistency and off-by-one fix
phy: phy-twl4030-usb: Fix possible use-after-free in twl4030_usb_remove()
btrfs: convert logic BUG_ON()'s in replace_path to ASSERT()'s
scsi: lpfc: Fix incorrect dbde assignment when building target abts wqe
scsi: lpfc: Fix pt2pt connection does not recover after LOGO
scsi: target: pscsi: Fix warning in pscsi_complete_cmd()
media: ite-cir: check for receive overflow
power: supply: bq27xxx: fix power_avg for newer ICs
extcon: arizona: Fix some issues when HPDET IRQ fires after the jack has been unplugged
media: media/saa7164: fix saa7164_encoder_register() memory leak bugs
media: gspca/sq905.c: fix uninitialized variable
power: supply: Use IRQF_ONESHOT
drm/amdgpu : Fix asic reset regression issue introduce by 8f211fe8ac7c4f
scsi: qla2xxx: Always check the return value of qla24xx_get_isp_stats()
scsi: qla2xxx: Fix use after free in bsg
scsi: scsi_dh_alua: Remove check for ASC 24h in alua_rtpg()
media: em28xx: fix memory leak
media: vivid: update EDID
clk: socfpga: arria10: Fix memory leak of socfpga_clk on error return
power: supply: generic-adc-battery: fix possible use-after-free in gab_remove()
power: supply: s3c_adc_battery: fix possible use-after-free in s3c_adc_bat_remove()
media: adv7604: fix possible use-after-free in adv76xx_remove()
media: i2c: adv7511-v4l2: fix possible use-after-free in adv7511_remove()
media: i2c: adv7842: fix possible use-after-free in adv7842_remove()
media: dvb-usb: fix memory leak in dvb_usb_adapter_init
media: gscpa/stv06xx: fix memory leak
drm/msm/mdp5: Configure PP_SYNC_HEIGHT to double the vtotal
drm/amdgpu: fix NULL pointer dereference
scsi: lpfc: Fix crash when a REG_RPI mailbox fails triggering a LOGO response
scsi: lpfc: Remove unsupported mbox PORT_CAPABILITIES logic
scsi: libfc: Fix a format specifier
ALSA: emu8000: Fix a use after free in snd_emu8000_create_mixer
ALSA: hda/conexant: Re-order CX5066 quirk table entries
ALSA: sb: Fix two use after free in snd_sb_qsound_build
btrfs: fix race when picking most recent mod log operation for an old root
arm64/vdso: Discard .note.gnu.property sections in vDSO
openvswitch: fix stack OOB read while fragmenting IPv4 packets
ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure
NFSv4: Don't discard segments marked for return in _pnfs_return_layout()
jffs2: Fix kasan slab-out-of-bounds problem
powerpc/eeh: Fix EEH handling for hugepages in ioremap space.
powerpc: fix EDEADLOCK redefinition error in uapi/asm/errno.h
intel_th: pci: Add Alder Lake-M support
md/raid1: properly indicate failure when ending a failed write request
security: commoncap: fix -Wstringop-overread warning
Fix misc new gcc warnings
jffs2: check the validity of dstlen in jffs2_zlib_compress()
Revert 337f13046f ("futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT op")
posix-timers: Preserve return value in clock_adjtime32()
ftrace: Handle commands when closing set_ftrace_filter file
ext4: fix check to prevent false positive report of incorrect used inodes
ext4: fix error code in ext4_commit_super
media: dvbdev: Fix memory leak in dvb_media_device_free()
usb: gadget: dummy_hcd: fix gpf in gadget_setup
usb: gadget: Fix double free of device descriptor pointers
usb: gadget/function/f_fs string table fix for multiple languages
usb: dwc3: gadget: Fix START_TRANSFER link state check
tracing: Map all PIDs to command lines
dm persistent data: packed struct should have an aligned() attribute too
dm space map common: fix division bug in sm_ll_find_free_block()
dm rq: fix double free of blk_mq_tag_set in dev remove after table load fails
modules: mark ref_module static
modules: mark find_symbol static
modules: mark each_symbol_section static
modules: unexport __module_text_address
modules: unexport __module_address
modules: rename the licence field in struct symsearch to license
modules: return licensing information from find_symbol
modules: inherit TAINT_PROPRIETARY_MODULE
Bluetooth: verify AMP hci_chan before amp_destroy
hsr: use netdev_err() instead of WARN_ONCE()
bluetooth: eliminate the potential race condition when removing the HCI controller
net/nfc: fix use-after-free llcp_sock_bind/connect
MIPS: pci-rt2880: fix slot 0 configuration
FDDI: defxx: Bail out gracefully with unassigned PCI resource for CSR
misc: lis3lv02d: Fix false-positive WARN on various HP models
misc: vmw_vmci: explicitly initialize vmci_notify_bm_set_msg struct
misc: vmw_vmci: explicitly initialize vmci_datagram payload
tracing: Restructure trace_clock_global() to never block
md-cluster: fix use-after-free issue when removing rdev
md: split mddev_find
md: factor out a mddev_find_locked helper from mddev_find
md: md_open returns -EBUSY when entering racing area
ipw2x00: potential buffer overflow in libipw_wx_set_encodeext()
cfg80211: scan: drop entry from hidden_list on overflow
drm/radeon: fix copy of uninitialized variable back to userspace
ALSA: hda/realtek: Re-order ALC882 Acer quirk table entries
ALSA: hda/realtek: Re-order ALC882 Sony quirk table entries
ALSA: hda/realtek: Re-order ALC269 Sony quirk table entries
ALSA: hda/realtek: Re-order ALC269 Lenovo quirk table entries
ALSA: hda/realtek: Remove redundant entry for ALC861 Haier/Uniwill devices
x86/cpu: Initialize MSR_TSC_AUX if RDTSCP *or* RDPID is supported
KVM: s390: split kvm_s390_logical_to_effective
KVM: s390: fix guarded storage control register handling
KVM: s390: split kvm_s390_real_to_abs
usb: gadget: pch_udc: Revert d3cb25a121 completely
memory: gpmc: fix out of bounds read and dereference on gpmc_cs[]
ARM: dts: exynos: correct PMIC interrupt trigger level on Odroid X/U3 family
ARM: dts: exynos: correct PMIC interrupt trigger level on SMDK5250
ARM: dts: exynos: correct PMIC interrupt trigger level on Snow
serial: stm32: fix incorrect characters on console
serial: stm32: fix tx_empty condition
usb: typec: tcpci: Check ROLE_CONTROL while interpreting CC_STATUS
x86/microcode: Check for offline CPUs before requesting new microcode
usb: gadget: pch_udc: Replace cpu_to_le32() by lower_32_bits()
usb: gadget: pch_udc: Check if driver is present before calling ->setup()
usb: gadget: pch_udc: Check for DMA mapping error
crypto: qat - don't release uninitialized resources
crypto: qat - ADF_STATUS_PF_RUNNING should be set after adf_dev_init
fotg210-udc: Fix DMA on EP0 for length > max packet size
fotg210-udc: Fix EP0 IN requests bigger than two packets
fotg210-udc: Remove a dubious condition leading to fotg210_done
fotg210-udc: Mask GRP2 interrupts we don't handle
fotg210-udc: Don't DMA more than the buffer can take
fotg210-udc: Complete OUT requests on short packets
mtd: require write permissions for locking and badblock ioctls
bus: qcom: Put child node before return
phy: marvell: ARMADA375_USBCLUSTER_PHY should not default to y, unconditionally
crypto: qat - fix error path in adf_isr_resource_alloc()
USB: gadget: udc: fix wrong pointer passed to IS_ERR() and PTR_ERR()
mtd: rawnand: gpmi: Fix a double free in gpmi_nand_init
staging: rtl8192u: Fix potential infinite loop
staging: greybus: uart: fix unprivileged TIOCCSERIAL
spi: Fix use-after-free with devm_spi_alloc_*
soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
soc: qcom: mdt_loader: Detect truncated read of segments
ACPI: CPPC: Replace cppc_attr with kobj_attribute
crypto: qat - Fix a double free in adf_create_ring
usb: gadget: r8a66597: Add missing null check on return from platform_get_resource
USB: cdc-acm: fix unprivileged TIOCCSERIAL
tty: actually undefine superseded ASYNC flags
tty: fix return value for unsupported ioctls
firmware: qcom-scm: Fix QCOM_SCM configuration
platform/x86: pmc_atom: Match all Beckhoff Automation baytrail boards with critclk_systems DMI table
x86/platform/uv: Fix !KEXEC build failure
Drivers: hv: vmbus: Increase wait time for VMbus unload
ttyprintk: Add TTY hangup callback.
media: vivid: fix assignment of dev->fbuf_out_flags
media: omap4iss: return error code when omap4iss_get() failed
media: m88rs6000t: avoid potential out-of-bounds reads on arrays
x86/kprobes: Fix to check non boostable prefixes correctly
pata_arasan_cf: fix IRQ check
pata_ipx4xx_cf: fix IRQ check
sata_mv: add IRQ checks
ata: libahci_platform: fix IRQ check
vfio/mdev: Do not allow a mdev_type to have a NULL parent pointer
clk: uniphier: Fix potential infinite loop
scsi: jazz_esp: Add IRQ check
scsi: sun3x_esp: Add IRQ check
scsi: sni_53c710: Add IRQ check
mfd: stm32-timers: Avoid clearing auto reload register
HSI: core: fix resource leaks in hsi_add_client_from_dt()
x86/events/amd/iommu: Fix sysfs type mismatch
HID: plantronics: Workaround for double volume key presses
perf symbols: Fix dso__fprintf_symbols_by_name() to return the number of printed chars
net: lapbether: Prevent racing when checking whether the netif is running
powerpc/prom: Mark identical_pvr_fixup as __init
powerpc: Fix HAVE_HARDLOCKUP_DETECTOR_ARCH build configuration
ALSA: core: remove redundant spin_lock pair in snd_card_disconnect
bug: Remove redundant condition check in report_bug
nfc: pn533: prevent potential memory corruption
ALSA: usb-audio: Add error checks for usb_driver_claim_interface() calls
liquidio: Fix unintented sign extension of a left shift of a u16
powerpc/perf: Fix PMU constraint check for EBB events
powerpc: iommu: fix build when neither PCI or IBMVIO is set
mac80211: bail out if cipher schemes are invalid
mt7601u: fix always true expression
IB/hfi1: Fix error return code in parse_platform_config()
net: thunderx: Fix unintentional sign extension issue
i2c: cadence: add IRQ check
i2c: emev2: add IRQ check
i2c: jz4780: add IRQ check
i2c: sh7760: add IRQ check
MIPS: pci-legacy: stop using of_pci_range_to_resource
powerpc/pseries: extract host bridge from pci_bus prior to bus removal
rtlwifi: 8821ae: upgrade PHY and RF parameters
i2c: sh7760: fix IRQ error path
mwl8k: Fix a double Free in mwl8k_probe_hw
vsock/vmci: log once the failed queue pair allocation
RDMA/i40iw: Fix error unwinding when i40iw_hmc_sd_one fails
net: davinci_emac: Fix incorrect masking of tx and rx error channel
ath9k: Fix error check in ath9k_hw_read_revisions() for PCI devices
powerpc/52xx: Fix an invalid ASM expression ('addi' used instead of 'add')
net:emac/emac-mac: Fix a use after free in emac_mac_tx_buf_send
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
kfifo: fix ternary sign extension bugs
smp: Fix smp_call_function_single_async prototype
Revert "net/sctp: fix race condition in sctp_destroy_sock"
sctp: delay auto_asconf init until binding the first addr
Revert "of/fdt: Make sure no-map does not remove already reserved regions"
Revert "fdt: Properly handle "no-map" field in the memory region"
tpm: fix error return code in tpm2_get_cc_attrs_tbl()
fs: dlm: fix debugfs dump
tipc: convert dest node's address to network order
net: stmmac: Set FIFO sizes for ipq806x
ALSA: hdsp: don't disable if not enabled
ALSA: hdspm: don't disable if not enabled
ALSA: rme9652: don't disable if not enabled
Bluetooth: Set CONF_NOT_COMPLETE as l2cap_chan default
Bluetooth: initialize skb_queue_head at l2cap_chan_create()
Bluetooth: check for zapped sk before connecting
ip6_vti: proper dev_{hold|put} in ndo_[un]init methods
mac80211: clear the beacon's CRC after channel switch
pinctrl: samsung: use 'int' for register masks in Exynos
cuse: prevent clone
selftests: Set CC to clang in lib.mk if LLVM is set
kconfig: nconf: stop endless search loops
sctp: Fix out-of-bounds warning in sctp_process_asconf_param()
powerpc/smp: Set numa node before updating mask
ASoC: rt286: Generalize support for ALC3263 codec
samples/bpf: Fix broken tracex1 due to kprobe argument change
powerpc/pseries: Stop calling printk in rtas_stop_self()
wl3501_cs: Fix out-of-bounds warnings in wl3501_send_pkt
wl3501_cs: Fix out-of-bounds warnings in wl3501_mgmt_join
powerpc/iommu: Annotate nested lock for lockdep
net: ethernet: mtk_eth_soc: fix RX VLAN offload
ASoC: rt286: Make RT286_SET_GPIO_* readable and writable
f2fs: fix a redundant call to f2fs_balance_fs if an error occurs
PCI: Release OF node in pci_scan_device()'s error path
ARM: 9064/1: hw_breakpoint: Do not directly check the event's overflow_handler hook
rpmsg: qcom_glink_native: fix error return code of qcom_glink_rx_data()
NFSv4.2: Always flush out writes in nfs42_proc_fallocate()
NFS: Deal correctly with attribute generation counter overflow
pNFS/flexfiles: fix incorrect size check in decode_nfs_fh()
NFSv4.2 fix handling of sr_eof in SEEK's reply
rtc: ds1307: Fix wday settings for rx8130
sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b
drm/radeon: Fix off-by-one power_state index heap overwrite
khugepaged: fix wrong result value for trace_mm_collapse_huge_page_isolate()
mm/hugeltb: handle the error case in hugetlb_fix_reserve_counts()
ksm: fix potential missing rmap_item for stable_node
net: fix nla_strcmp to handle more then one trailing null character
kernel: kexec_file: fix error return code of kexec_calculate_store_digests()
netfilter: nftables: avoid overflows in nft_hash_buckets()
ARC: entry: fix off-by-one error in syscall number validation
powerpc/64s: Fix crashes when toggling stf barrier
powerpc/64s: Fix crashes when toggling entry flush barrier
squashfs: fix divide error in calculate_skip()
userfaultfd: release page in error path to avoid BUG_ON
drm/radeon/dpm: Disable sclk switching on Oland when two 4K 60Hz monitors are connected
iio: proximity: pulsedlight: Fix rumtime PM imbalance on error
usb: fotg210-hcd: Fix an error message
ACPI: scan: Fix a memory leak in an error handling path
blk-mq: Swap two calls in blk_mq_exit_queue()
usb: dwc3: omap: improve extcon initialization
usb: xhci: Increase timeout for HC halt
usb: dwc2: Fix gadget DMA unmap direction
usb: core: hub: fix race condition about TRSMRCY of resume
iio: gyro: mpu3050: Fix reported temperature value
iio: tsl2583: Fix division by a zero lux_val
KVM: x86: Cancel pvclock_gtod_work on module removal
FDDI: defxx: Make MMIO the configuration default except for EISA
MIPS: Reinstate platform `__div64_32' handler
MIPS: Avoid DIVU in `__div64_32' is result would be zero
MIPS: Avoid handcoded DIVU in `__div64_32' altogether
thermal/core/fair share: Lock the thermal zone while looping over instances
RDMA/i40iw: Avoid panic when reading back the IRQ affinity hint
kobject_uevent: remove warning in init_uevent_argv()
netfilter: conntrack: Make global sysctls readonly in non-init netns
clk: exynos7: Mark aclk_fsys1_200 as critical
x86/msr: Fix wr/rdmsr_safe_regs_on_cpu() prototypes
kgdb: fix gcc-11 warning on indentation
usb: sl811-hcd: improve misleading indentation
cxgb4: Fix the -Wmisleading-indentation warning
isdn: capi: fix mismatched prototypes
PCI: thunder: Fix compile testing
ARM: 9066/1: ftrace: pause/unpause function graph tracer in cpu_suspend()
ACPI / hotplug / PCI: Fix reference count leak in enable_slot()
Input: elants_i2c - do not bind to i2c-hid compatible ACPI instantiated devices
Input: silead - add workaround for x86 BIOS-es which bring the chip up in a stuck state
um: Mark all kernel symbols as local
ceph: fix fscache invalidation
gpiolib: acpi: Add quirk to ignore EC wakeups on Dell Venue 10 Pro 5055
ALSA: hda: generic: change the DAC ctl name for LO+SPK or LO+HP
block: reexpand iov_iter after read/write
lib: stackdepot: turn depot_lock spinlock to raw_spinlock
serial: 8250: fix potential deadlock in rs485-mode
sit: proper dev_{hold|put} in ndo_[un]init methods
ip6_tunnel: sit: proper dev_{hold|put} in ndo_[un]init methods
xhci: Do not use GFP_KERNEL in (potentially) atomic context
ipv6: remove extra dev_hold() for fallback tunnels
Linux 4.14.233
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I09e88e1e302d475f2a39bf88438dea30fa97c848
[ Upstream commit f567d6ef8606fb427636e824c867229ecb5aefab ]
Plantronics Blackwire 3220 Series (047f:c056) sends HID reports twice
for each volume key press. This patch adds a quirk to hid-plantronics
for this product ID, which will ignore the second volume key press if
it happens within 5 ms from the last one that was handled.
The patch was tested on the mentioned model only, it shouldn't affect
other models, however, this quirk might be needed for them too.
Auto-repeat (when a key is held pressed) is not affected, because the
rate is about 3 times per second, which is far less frequent than once
in 5 ms.
Fixes: 81bb773fae ("HID: plantronics: Update to map volume up/down controls")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Changes in 4.14.197
HID: core: Correctly handle ReportSize being zero
HID: core: Sanitize event code and type when mapping input
perf record/stat: Explicitly call out event modifiers in the documentation
drm/msm: add shutdown support for display platform_driver
hwmon: (applesmc) check status earlier.
nvmet: Disable keep-alive timer when kato is cleared to 0h
ceph: don't allow setlease on cephfs
cpuidle: Fixup IRQ state
s390: don't trace preemption in percpu macros
xen/xenbus: Fix granting of vmalloc'd memory
dmaengine: of-dma: Fix of_dma_router_xlate's of_dma_xlate handling
batman-adv: Avoid uninitialized chaddr when handling DHCP
batman-adv: Fix own OGM check in aggregated OGMs
batman-adv: bla: use netif_rx_ni when not in interrupt context
dmaengine: at_hdmac: check return value of of_find_device_by_node() in at_dma_xlate()
MIPS: mm: BMIPS5000 has inclusive physical caches
MIPS: BMIPS: Also call bmips_cpu_setup() for secondary cores
netfilter: nf_tables: add NFTA_SET_USERDATA if not null
netfilter: nf_tables: incorrect enum nft_list_attributes definition
netfilter: nf_tables: fix destination register zeroing
net: hns: Fix memleak in hns_nic_dev_probe
net: systemport: Fix memleak in bcm_sysport_probe
ravb: Fixed to be able to unload modules
net: arc_emac: Fix memleak in arc_mdio_probe
dmaengine: pl330: Fix burst length if burst size is smaller than bus width
gtp: add GTPA_LINK info to msg sent to userspace
bnxt_en: Check for zero dir entries in NVRAM.
bnxt_en: Fix PCI AER error recovery flow
nvmet-fc: Fix a missed _irqsave version of spin_lock in 'nvmet_fc_fod_op_done()'
perf tools: Correct SNOOPX field offset
net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init()
fix regression in "epoll: Keep a reference on files added to the check list"
tg3: Fix soft lockup when tg3_reset_task() fails.
iommu/vt-d: Serialize IOMMU GCMD register modifications
thermal: ti-soc-thermal: Fix bogus thermal shutdowns for omap4430
include/linux/log2.h: add missing () around n in roundup_pow_of_two()
btrfs: drop path before adding new uuid tree entry
btrfs: Remove redundant extent_buffer_get in get_old_root
btrfs: Remove extraneous extent_buffer_get from tree_mod_log_rewind
btrfs: set the lockdep class for log tree extent buffers
uaccess: Add non-pagefault user-space read functions
uaccess: Add non-pagefault user-space write function
btrfs: fix potential deadlock in the search ioctl
net: usb: qmi_wwan: add Telit 0x1050 composition
usb: qmi_wwan: add D-Link DWM-222 A2 device ID
ALSA: ca0106: fix error code handling
ALSA: pcm: oss: Remove superfluous WARN_ON() for mulaw sanity check
ALSA: hda/hdmi: always check pin power status in i915 pin fixup
ALSA: firewire-digi00x: exclude Avid Adrenaline from detection
affs: fix basic permission bits to actually work
block: allow for_each_bvec to support zero len bvec
block: Move SECTOR_SIZE and SECTOR_SHIFT definitions into <linux/blkdev.h>
libata: implement ATA_HORKAGE_MAX_TRIM_128M and apply to Sandisks
dm cache metadata: Avoid returning cmd->bm wild pointer on error
dm thin metadata: Avoid returning cmd->bm wild pointer on error
mm: slub: fix conversion of freelist_corrupted()
KVM: arm64: Add kvm_extable for vaxorcism code
KVM: arm64: Defer guest entry when an asynchronous exception is pending
KVM: arm64: Survive synchronous exceptions caused by AT instructions
KVM: arm64: Set HCR_EL2.PTW to prevent AT taking synchronous exception
checkpatch: fix the usage of capture group ( ... )
mm/hugetlb: fix a race between hugetlb sysctl handlers
cfg80211: regulatory: reject invalid hints
net: usb: Fix uninit-was-stored issue in asix_read_phy_addr()
Linux 4.14.197
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I59da148f114d7f8fd84fc76c8178081ddaf26a49
commit 35556bed836f8dc07ac55f69c8d17dce3e7f0e25 upstream.
When calling into hid_map_usage(), the passed event code is
blindly stored as is, even if it doesn't fit in the associated bitmap.
This event code can come from a variety of sources, including devices
masquerading as input devices, only a bit more "programmable".
Instead of taking the event code at face value, check that it actually
fits the corresponding bitmap, and if it doesn't:
- spit out a warning so that we know which device is acting up
- NULLify the bitmap pointer so that we catch unexpected uses
Code paths that can make use of untrusted inputs can now check
that the mapping was indeed correct and bail out if not.
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes in 4.14.173
iwlwifi: pcie: fix rb_allocator workqueue allocation
netfilter: nf_conntrack: resolve clash for matching conntracks
ext4: fix potential race between online resizing and write operations
ext4: fix potential race between s_flex_groups online resizing and access
ext4: fix potential race between s_group_info online resizing and access
ipmi:ssif: Handle a possible NULL pointer reference
drm/msm: Set dma maximum segment size for mdss
dax: pass NOWAIT flag to iomap_apply
mac80211: consider more elements in parsing CRC
cfg80211: check wiphy driver existence for drvinfo report
qmi_wwan: re-add DW5821e pre-production variant
qmi_wwan: unconditionally reject 2 ep interfaces
net: ena: fix potential crash when rxfh key is NULL
net: ena: fix uses of round_jiffies()
net: ena: add missing ethtool TX timestamping indication
net: ena: fix incorrect default RSS key
net: ena: rss: fix failure to get indirection table
net: ena: rss: store hash function as values and not bits
net: ena: fix incorrectly saving queue numbers when setting RSS indirection table
net: ena: ethtool: use correct value for crc32 hash
net: ena: ena-com.c: prevent NULL pointer dereference
cifs: Fix mode output in debugging statements
cfg80211: add missing policy for NL80211_ATTR_STATUS_CODE
sysrq: Restore original console_loglevel when sysrq disabled
sysrq: Remove duplicated sysrq message
net: fib_rules: Correctly set table field when table number exceeds 8 bits
net: phy: restore mdio regs in the iproc mdio driver
nfc: pn544: Fix occasional HW initialization failure
sctp: move the format error check out of __sctp_sf_do_9_1_abort
ipv6: Fix nlmsg_flags when splitting a multipath route
ipv6: Fix route replacement with dev-only route
qede: Fix race between rdma destroy workqueue and link change event
net: sched: correct flower port blocking
ext4: potential crash on allocation error in ext4_alloc_flex_bg_array()
audit: fix error handling in audit_data_to_entry()
ACPICA: Introduce ACPI_ACCESS_BYTE_WIDTH() macro
ACPI: watchdog: Fix gas->access_width usage
KVM: VMX: check descriptor table exits on instruction emulation
HID: ite: Only bind to keyboard USB interface on Acer SW5-012 keyboard dock
HID: core: fix off-by-one memset in hid_report_raw_event()
HID: core: increase HID report buffer size to 8KiB
tracing: Disable trace_printk() on post poned tests
Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"
HID: hiddev: Fix race in in hiddev_disconnect()
MIPS: VPE: Fix a double free and a memory leak in 'release_vpe()'
i2c: altera: Fix potential integer overflow
i2c: jz4780: silence log flood on txabrt
drm/i915/gvt: Separate display reset from ALL_ENGINES reset
usb: charger: assign specific number for enum value
ecryptfs: Fix up bad backport of fe2e082f5da5b4a0a92ae32978f81507ef37ec66
include/linux/bitops.h: introduce BITS_PER_TYPE
net: netlink: cap max groups which will be considered in netlink_bind()
net: atlantic: fix potential error handling
net: ena: make ena rxfh support ETH_RSS_HASH_NO_CHANGE
namei: only return -ECHILD from follow_dotdot_rcu()
mwifiex: drop most magic numbers from mwifiex_process_tdls_action_frame()
KVM: SVM: Override default MMIO mask if memory encryption is enabled
KVM: Check for a bad hva before dropping into the ghc slow path
tuntap: correctly set SOCKWQ_ASYNC_NOSPACE
drivers: net: xgene: Fix the order of the arguments of 'alloc_etherdev_mqs()'
kprobes: Set unoptimized flag after unoptimizing code
perf hists browser: Restore ESC as "Zoom out" of DSO/thread/etc
mm/huge_memory.c: use head to check huge zero page
mm, thp: fix defrag setting if newline is not used
Revert "char/random: silence a lockdep splat with printk()"
audit: always check the netlink payload length in audit_receive_msg()
vhost: Check docket sk_family instead of call getname
x86/mce: Handle varying MCA bank counts
EDAC/amd64: Set grain per DIMM
net: dsa: bcm_sf2: Forcibly configure IMP port for 1Gb/sec
RDMA/core: Fix pkey and port assignment in get_new_pps
RDMA/core: Fix use of logical OR in get_new_pps
kprobes: Fix optimize_kprobe()/unoptimize_kprobe() cancellation logic
serial: ar933x_uart: set UART_CS_{RX,TX}_READY_ORIDE
selftests: fix too long argument
usb: gadget: composite: Support more than 500mA MaxPower
usb: gadget: ffs: ffs_aio_cancel(): Save/restore IRQ flags
usb: gadget: serial: fix Tx stall after buffer overflow
drm/msm/mdp5: rate limit pp done timeout warnings
drm: msm: Fix return type of dsi_mgr_connector_mode_valid for kCFI
drm/msm/dsi: save pll state before dsi host is powered off
net: ks8851-ml: Remove 8-bit bus accessors
net: ks8851-ml: Fix 16-bit data access
net: ks8851-ml: Fix 16-bit IO operation
watchdog: da9062: do not ping the hw during stop()
s390/cio: cio_ignore_proc_seq_next should increase position index
x86/boot/compressed: Don't declare __force_order in kaslr_64.c
nvme: Fix uninitialized-variable warning
x86/xen: Distribute switch variables for initialization
net: thunderx: workaround BGX TX Underflow issue
cifs: don't leak -EAGAIN for stat() during reconnect
usb: storage: Add quirk for Samsung Fit flash
usb: quirks: add NO_LPM quirk for Logitech Screen Share
usb: core: hub: fix unhandled return by employing a void function
usb: core: hub: do error out if usb_autopm_get_interface() fails
usb: core: port: do error out if usb_autopm_get_interface() fails
vgacon: Fix a UAF in vgacon_invert_region
mm, numa: fix bad pmd by atomically check for pmd_trans_huge when marking page tables prot_numa
fat: fix uninit-memory access for partial initialized inode
arm: dts: dra76x: Fix mmc3 max-frequency
tty:serial:mvebu-uart:fix a wrong return
serial: 8250_exar: add support for ACCES cards
vt: selection, close sel_buffer race
vt: selection, push console lock down
vt: selection, push sel_lock up
x86/pkeys: Manually set X86_FEATURE_OSPKE to preserve existing changes
dmaengine: tegra-apb: Fix use-after-free
dmaengine: tegra-apb: Prevent race conditions of tasklet vs free list
dm cache: fix a crash due to incorrect work item cancelling
ARM: dts: ls1021a: Restore MDIO compatible to gianfar
ASoC: topology: Fix memleak in soc_tplg_link_elems_load()
ASoC: intel: skl: Fix pin debug prints
ASoC: intel: skl: Fix possible buffer overflow in debug outputs
ASoC: pcm: Fix possible buffer overflow in dpcm state sysfs output
ASoC: pcm512x: Fix unbalanced regulator enable call in probe error path
ASoC: dapm: Correct DAPM handling of active widgets during shutdown
RDMA/iwcm: Fix iwcm work deallocation
RMDA/cm: Fix missing ib_cm_destroy_id() in ib_cm_insert_listen()
IB/hfi1, qib: Ensure RCU is locked when accessing list
ARM: imx: build v7_cpu_resume() unconditionally
hwmon: (adt7462) Fix an error return in ADT7462_REG_VOLT()
dmaengine: coh901318: Fix a double lock bug in dma_tc_handle()
powerpc: fix hardware PMU exception bug on PowerVM compatibility mode systems
dm integrity: fix a deadlock due to offloading to an incorrect workqueue
xhci: handle port status events for removed USB3 hcd
ASoC: topology: Fix memleak in soc_tplg_manifest_load()
Linux 4.14.173
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ic06bd3eb90ee58f3fd96bff8969ebf6d9db4cb8d
commit 84a4062632462c4320704fcdf8e99e89e94c0aba upstream.
We have a HID touch device that reports its opens and shorts test
results in HID buffers of size 8184 bytes. The maximum size of the HID
buffer is currently set to 4096 bytes, causing probe of this device to
fail. With this patch we increase the maximum size of the HID buffer to
8192 bytes, making device probe and acquisition of said buffers succeed.
Signed-off-by: Johan Korsnes <jkorsnes@cisco.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Armando Visconti <armando.visconti@st.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are two ways to connect the Steam Controller: directly to the USB
or with the USB wireless adapter. Both methods are similar, but the
wireless adapter can connect up to 4 devices at the same time.
The wired device will appear as 3 interfaces: a virtual mouse, a virtual
keyboard and a custom HID device.
The wireless device will appear as 5 interfaces: a virtual keyboard and
4 custom HID devices, that will remain silent until a device is actually
connected.
The custom HID device has a report descriptor with all vendor specific
usages, so the hid-generic is not very useful. In a PC/SteamBox Valve
Steam Client provices a software translation by using hidraw and a
creates a uinput virtual gamepad and XTest keyboard/mouse.
This driver intercepts the hidraw usage, so it can get out of the way
when the Steam Client is in use.
(cherry picked from commit c164d6abf3841ffacfdb757c10616f9cb1f67276
("HID: add driver for Valve Steam Controller"))
c164d6abf3
Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Change-Id: Ic435163998560885afb2a6d71b1604de21fb8b11
Signed-Off-By: Siarhei Vishniakou <svv@google.com>
Bug: 136263708
Test: connected steam controller to Android
[ Upstream commit 58e75155009cc800005629955d3482f36a1e0eec ]
As seen on some USB wireless keyboards manufactured by Primax, the HID
parser was using some assumptions that are not always true. In this case
it's s the fact that, inside the scope of a main item, an Usage Page
will always precede an Usage.
The spec is not pretty clear as 6.2.2.7 states "Any usage that follows
is interpreted as a Usage ID and concatenated with the Usage Page".
While 6.2.2.8 states "When the parser encounters a main item it
concatenates the last declared Usage Page with a Usage to form a
complete usage value." Being somewhat contradictory it was decided to
match Window's implementation, which follows 6.2.2.8.
In summary, the patch moves the Usage Page concatenation from the local
item parsing function to the main item parsing function.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Terry Junge <terry.junge@poly.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2e210bbb7429cdcf1a1a3ad00c1bf98bd9bf2452 upstream.
The commit 581c448476 ("HID: input: map digitizer battery usage")
assumed that devices having input (qas opposed to feature) report for
battery strength would report the data on their own, without the need to
be polled by the kernel; unfortunately it is not so. Many wireless mice
do not send unsolicited reports with battery strength data and have to
be polled explicitly. As a complication, stylus devices on digitizers
are not normally connected to the base and thus can not be polled - the
base can only determine battery strength in the stylus when it is in
proximity.
To solve this issue, we add a special flag that tells the kernel
to avoid polling the device (and expect unsolicited reports) and set it
when report field with physical usage of digitizer stylus (HID_DG_STYLUS).
Unless this flag is set, and we have not seen the unsolicited reports,
the kernel will attempt to poll the device when userspace attempts to
read "capacity" and "state" attributes of power_supply object
corresponding to the devices battery.
Fixes: 581c448476 ("HID: input: map digitizer battery usage")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=198095
Cc: stable@vger.kernel.org
Reported-and-tested-by: Martin van Es <martin@mrvanes.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6de0b13cc0b4ba10e98a9263d7a83b940720b77a upstream.
When size is negative, calling memset will make segment fault.
Declare the size as type u32 to keep memset safe.
size in struct hid_report is unsigned, fix return type of
hid_report_len to u32.
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull HID update from Jiri Kosina:
- Wacom driver fixes/updates (device name generation improvements,
touch ring status support) from Jason Gerecke
- T100 touchpad support from Hans de Goede
- support for batteries driven by HID input reports, from Dmitry
Torokhov
- Arnd pointed out that driver_lock semaphore is superfluous, as driver
core already provides all the necessary concurency protection.
Removal patch from Binoy Jayan
- logical minimum numbering improvements in sensor-hub driver, from
Srinivas Pandruvada
- support for Microsoft Win8 Wireless Radio Controls extensions from
João Paulo Rechi Vita
- assorted small fixes and device ID additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (28 commits)
HID: prodikeys: constify snd_rawmidi_ops structures
HID: sensor: constify platform_device_id
HID: input: throttle battery uevents
HID: usbmouse: constify usb_device_id and fix space before '[' error
HID: usbkbd: constify usb_device_id and fix space before '[' error.
HID: hid-sensor-hub: Force logical minimum to 1 for power and report state
HID: wacom: Do not completely map WACOM_HID_WD_TOUCHRINGSTATUS usage
HID: asus: Add T100CHI bluetooth keyboard dock touchpad support
HID: ntrig: constify attribute_group structures.
HID: logitech-hidpp: constify attribute_group structures.
HID: sensor: constify attribute_group structures.
HID: multitouch: constify attribute_group structures.
HID: multitouch: use proper symbolic constant for 0xff310076 application
HID: multitouch: Support Asus T304UA media keys
HID: multitouch: Support HID_GD_WIRELESS_RADIO_CTLS
HID: input: optionally use device id in battery name
HID: input: map digitizer battery usage
HID: Remove the semaphore driver_lock
HID: wacom: add USB_HID dependency
HID: add ALWAYS_POLL quirk for Logitech 0xc077
...
- support for media keys on Asus T304UA from João Paulo Rechi Vita
- support for Microsoft Win8 Wireless Radio Controls extensions
from João Paulo Rechi Vita
Conflicts:
drivers/hid/hid-ids.h
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
- Arnd pointed out that driver_lock semaphore is superfluous, as
driver core already provides all the necessary concurency protection.
Removal patch from Binoy Jayan
The current f_hid driver doesn't handle GET_PROCOTOL and
SET_PROCOTOL requests, which are required to operate HID
gadgets in BOOT mode. This patch implements this feature for
devices that have the same implementation for REPORT and BOOT mode
so that these devices are recognized by older BIOSes.
Signed-off-by: Abdulhadi Mohamed <abdulahhadi2@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
The Asus T304UA convertible sports a magnetic detachable keyboard with
touchpad, which is connected over USB. Most of the keyboard hotkeys are
exposed through the same USB interface as the touchpad, defined in the
report descriptor as follows:
0x06, 0x31, 0xFF, // Usage Page (Vendor Defined 0xFF31)
0x09, 0x76, // Usage (0x76)
0xA1, 0x01, // Collection (Application)
0x05, 0xFF, // Usage Page (Reserved 0xFF)
0x85, 0x5A, // Report ID (90)
0x19, 0x00, // Usage Minimum (0x00)
0x2A, 0xFF, 0x00, // Usage Maximum (0xFF)
0x15, 0x00, // Logical Minimum (0)
0x26, 0xFF, 0x00, // Logical Maximum (255)
0x75, 0x08, // Report Size (8)
0x95, 0x0F, // Report Count (15)
0xB1, 0x02, // Feature (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position,Non-volatile)
0x05, 0xFF, // Usage Page (Reserved 0xFF)
0x85, 0x5A, // Report ID (90)
0x19, 0x00, // Usage Minimum (0x00)
0x2A, 0xFF, 0x00, // Usage Maximum (0xFF)
0x15, 0x00, // Logical Minimum (0)
0x26, 0xFF, 0x00, // Logical Maximum (255)
0x75, 0x08, // Report Size (8)
0x95, 0x02, // Report Count (2)
0x81, 0x02, // Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position)
0xC0, // End Collection
This UsagePage is declared as a variable, but we need to treat it as an
array to be able to map each Usage we care about to its corresponding
input key.
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We already mapped battery strength reports from the generic device
control page, but we did not update capacity from input reports, nor we
mapped the battery strength report from the digitizer page, so let's
implement this now.
Batteries driven by the input reports will now start in "unknown" state,
and will get updated once we receive first report containing battery
strength from the device.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The semaphore 'driver_lock' is used as a simple mutex, and also unnecessary as
suggested by Arnd. Hence removing it, as the concurrency between the probe and
remove is already handled in the driver core.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Although HID itself is transport-agnostic, occasionally a driver may
want to interact with the low-level transport that a device is connected
through. To do this, we need to know what kind of bus is in use. The
first guess may be to look at the 'bus' field of the 'struct hid_device',
but this field may be emulated in some cases (e.g. uhid).
More ideally, we can check which ll_driver a device is using. This
function introduces a 'hid_is_using_ll_driver' function and makes the
'struct hid_ll_driver' of the four most common transports accessible
through hid.h.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Acked-By: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The HID transport drivers either re-implement exactly the same logic
(usbhid, i2c-hid) or forget to implement it (usbhid) which causes issues
when the same device is accessed via multiple interfaces (for example input
device through evdev and also hidraw). Let's muve the locking logic into
HID core to make sure the serialized behavior is always enforced.
Also let's uninline and move hid_hw_start() and hid_hw_stop() into hid-core
as hid_hw_start() is somewhat large and do not believe we get any benefit
from these two being inline.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Use a better URL for the HUTRR40 Radio HID Usages documentation and use the
HID_GD_WIRELESS_RADIO_CTLS define rather then hardcoding a check for
0x0001000c.
Fixes: 61df56bef9 ("HID: Add mapping for Microsoft Win8 Wireless Radio Controls extensions")
Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
They are part of HUTRR34 for multi-touch digitizers:
0x0E Device configuration CA 16.7
0x23 Device settings CL 16.7
Signed-off-by: Xiaolei Yu <dreifachstein@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We need to store the minor number each drivers. In case of hidraw, the
minor number is stored stores in struct hidraw. But hiddev's minor is
located in struct hid_device.
The hid-core driver announces a kernel message which driver is loaded when
HID device connected, but hiddev's minor number is always zero. To proper
display hiddev's minor number, we need to store the minor number asked from
usb core and do some refactoring work (move from hiddev.c to hiddev.h) to
access hiddev in hid-core.
[jkosina@suse.cz: rebase on top of newer codebase]
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
It looks like a bunch of devices do not like to be polled
for their reports at init time. When you look into the details,
it seems that for those that are requiring the quirk
HID_QUIRK_NO_INIT_REPORTS, the driver fails to retrieve part
of the features/inputs while others (more generic) work.
IMO, it should be acceptable to remove the need for the quirk
in the general case. On the small amount of cases where
we actually need to read the current values, the driver
in charge (hid-mt or wacom) already retrieves the features
manually.
There are 2 cases where we might need to retrieve the reports at
init:
1. hiddev devices with specific use-space tool
2. a device that would require the driver to fetch a specific
feature/input at plug
For case 2, I have seen this a few time on hid-multitouch. It
is solved in hid-multitouch directly by fetching the feature.
I hope it won't be too common and this can be solved on a per-case
basis (crossing fingers).
For case 1, we moved the implementation of HID_QUIRK_NO_INIT_REPORTS
in hiddev. When somebody starts calling ioctls that needs an initial
update, the hiddev device will fetch the initial state of the reports
to mimic the current behavior. This adds a small amount of time during
the first HIDIOCGUSAGE(S), but it should be acceptable in
most cases. To keep the currently known broken devices, we have to
keep around HID_QUIRK_NO_INIT_REPORTS, but the scope will only be
for hiddev.
Note that I don't think hidraw would be affected and I checked that
the FF drivers that need to interact with the report fields are all
using output reports, which are not initialized by
usbhid_init_reports().
NO_INIT_INPUT_REPORTS is then replaced by HID_QUIRK_NO_INIT_REPORTS:
there is no point keeping it for just one device.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The purpose of HID_QUIRK_MULTI_INPUT is to have an input device per
report id. This is useful when the HID device presents several HID
collections of different device types.
The current implementation of hid-input creates one input node per id per
type (input or output). This is problematic for the LEDs of a keyboard as
they are often set through an output report. The current code creates
one input node with all the keyboard keys, and one other with only the
LEDs.
To solve this, we use a two-passes way:
- first, we initialize all input nodes and associate one per report id
- then, we register all the input nodes
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Adds support for usages that may appear on the pen or pad interface which
report the state of the tablet battery.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The HID standard defines usages that allow digitizers to report the pen's
height, tilt, and rotation and which are used by Wacom's new "MobileStudio
Pro" devices.
Note that 'hidinput_calc_abs_res' expects ABS_Z (historically used by our
driver to report twist) to have linear units. To ensure it calculates a
resolution with the actually-angular units provided in the HID descriptor
we nedd to lie and tell it we're calculating it for the (rotational) ABS_RZ
axis instead.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add a new helper to_hid_driver() and use it in hid-core.c.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
to_hid_device() macro is defined in both hid-lg4ff.c and
hid-logitech-hidpp.c. So I move it to include/linux/hid.h.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Logitech G920 uses a couple of vendor specific usage pages,
which results in incorrect number of axis/buttons being detected.
This patch adds these pages to the 'ignore' list.
Reported-by: Elias Vanderstuyft <elias.vds@gmail.com>
Signed-off-by: Simon Wood <simon@mungewell.org>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Rename the function extract() to hid_field_extract(), make it external linkage
to allow the use from other modules.
Suggested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID updates from Jiri Kosina:
- quite a few firmware fixes for RMI driver by Andrew Duggan
- huion and uclogic drivers have been substantially overlaping in
functionality laterly. This redundancy is fixed by hid-huion driver
being merged into hid-uclogic; work done by Benjamin Tissoires and
Nikolai Kondrashov
- i2c-hid now supports ACPI GPIO interrupts; patch from Mika Westerberg
- Some of the quirks, that got separated into individual drivers, have
historically had EXPERT dependency. As HID subsystem matured (as
well as the individual drivers), this made less and less sense. This
dependency is now being removed by patch from Jean Delvare
- Logitech lg4ff driver received a couple of improvements for mode
switching, by Michal Malý
- multitouch driver now supports clickpads, patches by Benjamin
Tissoires and Seth Forshee
- hid-sensor framework received a substantial update; namely support
for Custom and Generic pages is being added; work done by Srinivas
Pandruvada
- wacom driver received substantial update; it now supports
i2c-conntected devices (Mika Westerberg), Bamboo PADs are now
properly supported (Benjamin Tissoires), much improved battery
reporting (Jason Gerecke) and pen proximity cleanups (Ping Cheng)
- small assorted fixes and device ID additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (68 commits)
HID: sensor: Update document for custom sensor
HID: sensor: Custom and Generic sensor support
HID: debug: fix error handling in hid_debug_events_read()
Input - mt: Fix input_mt_get_slot_by_key
HID: logitech-hidpp: fix error return code
HID: wacom: Add support for Cintiq 13HD Touch
HID: logitech-hidpp: add a module parameter to keep firmware gestures
HID: usbhid: yet another mouse with ALWAYS_POLL
HID: usbhid: more mice with ALWAYS_POLL
HID: wacom: set stylus_in_proximity before checking touch_down
HID: wacom: use wacom_wac_finger_count_touches to set touch_down
HID: wacom: remove hardcoded WACOM_QUIRK_MULTI_INPUT
HID: pidff: effect can't be NULL
HID: add quirk for PIXART OEM mouse used by HP
HID: add HP OEM mouse to quirk ALWAYS_POLL
HID: wacom: ask for a in-prox report when it was missed
HID: hid-sensor-hub: Fix sparse warning
HID: hid-sensor-hub: fix attribute read for logical usage id
HID: plantronics: fix Kconfig default
HID: pidff: support more than one concurrent effect
...
Change the ownership of power_supply structure from each driver
implementing the class to the power supply core.
The patch changes power_supply_register() function thus all drivers
implementing power supply class are adjusted.
Each driver provides the implementation of power supply. However it
should not be the owner of power supply class instance because it is
exposed by core to other subsystems with power_supply_get_by_name().
These other subsystems have no knowledge when the driver will unregister
the power supply. This leads to several issues when driver is unbound -
mostly because user of power supply accesses freed memory.
Instead let the core own the instance of struct 'power_supply'. Other
users of this power supply will still access valid memory because it
will be freed when device reference count reaches 0. Currently this
means "it will leak" but power_supply_put() call in next patches will
solve it.
This solves invalid memory references in following race condition
scenario:
Thread 1: charger manager
Thread 2: power supply driver, used by charger manager
THREAD 1 (charger manager) THREAD 2 (power supply driver)
========================== ==============================
psy = power_supply_get_by_name()
Driver unbind, .remove
power_supply_unregister()
Device fully removed
psy->get_property()
The 'get_property' call is executed in invalid context because the driver was
unbound and struct 'power_supply' memory was freed.
This could be observed easily with charger manager driver (here compiled
with max17040 fuel gauge):
$ cat /sys/devices/virtual/power_supply/cm-battery/capacity &
$ echo "1-0036" > /sys/bus/i2c/drivers/max17040/unbind
[ 55.725123] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[ 55.732584] pgd = d98d4000
[ 55.734060] [00000000] *pgd=5afa2831, *pte=00000000, *ppte=00000000
[ 55.740318] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM
[ 55.746210] Modules linked in:
[ 55.749259] CPU: 1 PID: 2936 Comm: cat Tainted: G W 3.19.0-rc1-next-20141226-00048-gf79f475f3c44-dirty #1496
[ 55.760190] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[ 55.766270] task: d9b76f00 ti: daf54000 task.ti: daf54000
[ 55.771647] PC is at 0x0
[ 55.774182] LR is at charger_get_property+0x2f4/0x36c
[ 55.779201] pc : [<00000000>] lr : [<c034b0b4>] psr: 60000013
[ 55.779201] sp : daf55e90 ip : 00000003 fp : 00000000
[ 55.790657] r10: 00000000 r9 : c06e2878 r8 : d9b26c68
[ 55.795865] r7 : dad81610 r6 : daec7410 r5 : daf55ebc r4 : 00000000
[ 55.802367] r3 : 00000000 r2 : daf55ebc r1 : 0000002a r0 : d9b26c68
[ 55.808879] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
[ 55.815994] Control: 10c5387d Table: 598d406a DAC: 00000015
[ 55.821723] Process cat (pid: 2936, stack limit = 0xdaf54210)
[ 55.827451] Stack: (0xdaf55e90 to 0xdaf56000)
[ 55.831795] 5e80: 60000013 c01459c4 0000002a c06f8ef8
[ 55.839956] 5ea0: db651000 c06f8ef8 daebac00 c04cb668 daebac08 c0346864 00000000 c01459c4
[ 55.848115] 5ec0: d99eaa80 c06f8ef8 00000fff 00001000 db651000 c027f25c c027f240 d99eaa80
[ 55.856274] 5ee0: d9a06c00 c0146218 daf55f18 00001000 d99eaa80 db4c18c0 00000001 00000001
[ 55.864468] 5f00: daf55f80 c0144c78 c0144c54 c0107f90 00015000 d99eaab0 00000000 00000000
[ 55.872603] 5f20: 000051c7 00000000 db4c18c0 c04a9370 00015000 00001000 daf55f80 00001000
[ 55.880763] 5f40: daf54000 00015000 00000000 c00e53dc db4c18c0 c00e548c 0000000d 00008124
[ 55.888937] 5f60: 00000001 00000000 00000000 db4c18c0 db4c18c0 00001000 00015000 c00e5550
[ 55.897099] 5f80: 00000000 00000000 00001000 00001000 00015000 00000003 00000003 c000f364
[ 55.905239] 5fa0: 00000000 c000f1a0 00001000 00015000 00000003 00015000 00001000 0001333c
[ 55.913399] 5fc0: 00001000 00015000 00000003 00000003 00000002 00000000 00000000 00000000
[ 55.921560] 5fe0: 7fffe000 be999850 0000a225 b6f3c19c 60000010 00000003 00000000 00000000
[ 55.929744] [<c034b0b4>] (charger_get_property) from [<c0346864>] (power_supply_show_property+0x48/0x20c)
[ 55.939286] [<c0346864>] (power_supply_show_property) from [<c027f25c>] (dev_attr_show+0x1c/0x48)
[ 55.948130] [<c027f25c>] (dev_attr_show) from [<c0146218>] (sysfs_kf_seq_show+0x84/0x104)
[ 55.956298] [<c0146218>] (sysfs_kf_seq_show) from [<c0144c78>] (kernfs_seq_show+0x24/0x28)
[ 55.964536] [<c0144c78>] (kernfs_seq_show) from [<c0107f90>] (seq_read+0x1b0/0x484)
[ 55.972172] [<c0107f90>] (seq_read) from [<c00e53dc>] (__vfs_read+0x18/0x4c)
[ 55.979188] [<c00e53dc>] (__vfs_read) from [<c00e548c>] (vfs_read+0x7c/0x100)
[ 55.986304] [<c00e548c>] (vfs_read) from [<c00e5550>] (SyS_read+0x40/0x8c)
[ 55.993164] [<c00e5550>] (SyS_read) from [<c000f1a0>] (ret_fast_syscall+0x0/0x48)
[ 56.000626] Code: bad PC value
[ 56.011652] ---[ end trace 7b64343fbdae8ef1 ]---
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
[for the nvec part]
Reviewed-by: Marc Dietrich <marvin24@gmx.de>
[for compal-laptop.c]
Acked-by: Darren Hart <dvhart@linux.intel.com>
[for the mfd part]
Acked-by: Lee Jones <lee.jones@linaro.org>
[for the hid part]
Acked-by: Jiri Kosina <jkosina@suse.cz>
[for the acpi part]
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
According to [1], Windows Precision Touchpad devices must supply
a button type usage in the device capabilities feature report. A
value of 0 indicates that the device contains a depressible
button (i.e. it's a click-pad) whereas a value of 1 indicates
a non-depressible button. Add support for this usage and set
INPUT_PROP_BUTTONPAD on the touchpad input device whenever a
depressible button is present.
[1] https://msdn.microsoft.com/en-us/library/windows/hardware/dn467314(v=vs.85).aspx
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Currently HID code maps usages from telephony page into BTN_0, BTN_1, etc
keys which get interpreted by mousedev and userspace as left/right/middle
button clicks, which is not really helpful.
This change adds mappings for usages that have corresponding input event
definitions, and leaves the rest unmapped. This can be changed when
there are userspace consumers for more telephony usages.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
On composite HID devices there may be multiple HID devices on separate
interfaces, but hid-rmi should only bind to the touchpad. The previous version
simply checked that the interface protocol was set to mouse. Unfortuately, it
is not always the case that the touchpad has the mouse interface protocol set.
This patch takes a different approach and scans the report descriptor looking
for the Generic Desktop Pointer usage and the Vendor Specific Top Level
Collection needed by the hid-rmi driver to interface with the device.
Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
