* refs/heads/tmp-509b380:
Revert "Revert "ANDROID: security,perf: Allow further restriction of perf_event_open""
Linux 4.14.168
m68k: Call timer_interrupt() with interrupts disabled
serial: stm32: fix clearing interrupt error flags
IB/iser: Fix dma_nents type definition
arm64: dts: juno: Fix UART frequency
drm/radeon: fix bad DMA from INTERRUPT_CNTL2
dmaengine: ti: edma: fix missed failure handling
affs: fix a memory leak in affs_remount
mmc: core: fix wl1251 sdio quirks
mmc: sdio: fix wl1251 vendor id
packet: fix data-race in fanout_flow_is_huge()
net: neigh: use long type to store jiffies delta
hv_netvsc: flag software created hash value
MIPS: Loongson: Fix return value of loongson_hwmon_init
afs: Fix large file support
net: qca_spi: Move reset_count to struct qcaspi
net: netem: correct the parent's backlog when corrupted packet was dropped
net: netem: fix error path for corrupted GSO frames
dmaengine: imx-sdma: fix size check for sdma script_number
drm/msm/dsi: Implement reset correctly
tcp: annotate lockless access to tcp_memory_pressure
net: add {READ|WRITE}_ONCE() annotations on ->rskq_accept_head
net: avoid possible false sharing in sk_leave_memory_pressure()
act_mirred: Fix mirred_init_module error handling
net: stmmac: fix length of PTP clock's name string
llc: fix sk_buff refcounting in llc_conn_state_process()
llc: fix another potential sk_buff leak in llc_ui_sendmsg()
mac80211: accept deauth frames in IBSS mode
net: stmmac: gmac4+: Not all Unicast addresses may be available
nvme: retain split access workaround for capability reads
net: ethernet: stmmac: Fix signedness bug in ipq806x_gmac_of_parse()
of: mdio: Fix a signedness bug in of_phy_get_and_connect()
net: axienet: fix a signedness bug in probe
net: stmmac: dwmac-meson8b: Fix signedness bug in probe
net: broadcom/bcmsysport: Fix signedness in bcm_sysport_probe()
net: hisilicon: Fix signedness bug in hix5hd2_dev_probe()
net: aquantia: Fix aq_vec_isr_legacy() return value
iommu/amd: Wait for completion of IOTLB flush in attach_device
net/rds: Fix 'ib_evt_handler_call' element in 'rds_ib_stat_names'
RDMA/cma: Fix false error message
ath10k: adjust skb length in ath10k_sdio_mbox_rx_packet
pinctrl: iproc-gpio: Fix incorrect pinconf configurations
net: sonic: replace dev_kfree_skb in sonic_send_packet
hwmon: (shtc1) fix shtc1 and shtw1 id mask
ixgbe: sync the first fragment unconditionally
btrfs: use correct count in btrfs_file_write_iter()
Btrfs: fix inode cache waiters hanging on path allocation failure
Btrfs: fix inode cache waiters hanging on failure to start caching thread
Btrfs: fix hang when loading existing inode cache off disk
scsi: fnic: fix msix interrupt allocation
net: sonic: return NETDEV_TX_OK if failed to map buffer
tty: serial: fsl_lpuart: Use appropriate lpuart32_* I/O funcs
ath9k: dynack: fix possible deadlock in ath_dynack_node_{de}init
iio: dac: ad5380: fix incorrect assignment to val
bcma: fix incorrect update of BCMA_CORE_PCI_MDIO_DATA
irqdomain: Add the missing assignment of domain->fwnode for named fwnode
staging: greybus: light: fix a couple double frees
x86, perf: Fix the dependency of the x86 insn decoder selftest
power: supply: Init device wakeup after device_add()
hwmon: (lm75) Fix write operations for negative temperatures
Partially revert "kfifo: fix kfifo_alloc() and kfifo_init()"
ahci: Do not export local variable ahci_em_messages
iommu/mediatek: Fix iova_to_phys PA start for 4GB mode
mips: avoid explicit UB in assignment of mips_io_port_base
rtc: pcf2127: bugfix: read rtc disables watchdog
media: atmel: atmel-isi: fix timeout value for stop streaming
mac80211: minstrel_ht: fix per-group max throughput rate initialization
dmaengine: dw: platform: Switch to acpi_dma_controller_register()
ASoC: sun4i-i2s: RX and TX counter registers are swapped
signal: Allow cifs and drbd to receive their terminating signals
bnxt_en: Fix handling FRAG_ERR when NVM_INSTALL_UPDATE cmd fails
net/rds: Add a few missing rds_stat_names entries
ASoC: wm8737: Fix copy-paste error in wm8737_snd_controls
ASoC: cs4349: Use PM ops 'cs4349_runtime_pm'
ASoC: es8328: Fix copy-paste error in es8328_right_line_controls
ext4: set error return correctly when ext4_htree_store_dirent fails
crypto: caam - free resources in case caam_rng registration failed
cifs: fix rmmod regression in cifs.ko caused by force_sig changes
net/mlx5: Fix mlx5_ifc_query_lag_out_bits
ARM: dts: stm32: add missing vdda-supply to adc on stm32h743i-eval
tipc: reduce risk of wakeup queue starvation
ALSA: aoa: onyx: always initialize register read value
crypto: ccp - Reduce maximum stack usage
x86/kgbd: Use NMI_VECTOR not APIC_DM_NMI
mic: avoid statically declaring a 'struct device'.
usb: host: xhci-hub: fix extra endianness conversion
qed: reduce maximum stack frame size
libertas_tf: Use correct channel range in lbtf_geo_init
PM: sleep: Fix possible overflow in pm_system_cancel_wakeup()
clk: sunxi-ng: v3s: add the missing PLL_DDR1
scsi: libfc: fix null pointer dereference on a null lport
net: pasemi: fix an use-after-free in pasemi_mac_phy_init()
RDMA/hns: Fixs hw access invalid dma memory error
devres: allow const resource arguments
rxrpc: Fix uninitialized error code in rxrpc_send_data_packet()
mfd: intel-lpss: Release IDA resources
iommu/amd: Make iommu_disable safer
bnxt_en: Fix ethtool selftest crash under error conditions.
nvmem: imx-ocotp: Ensure WAIT bits are preserved when setting timing
clk: qcom: Fix -Wunused-const-variable
dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width"
perf/ioctl: Add check for the sample_period value
drm/msm/a3xx: remove TPL1 regs from snapshot
rtc: pcf8563: Clear event flags and disable interrupts before requesting irq
rtc: pcf8563: Fix interrupt trigger method
ASoC: ti: davinci-mcasp: Fix slot mask settings when using multiple AXRs
net/af_iucv: always register net_device notifier
net: netem: fix backlog accounting for corrupted GSO frames
drm/msm/mdp5: Fix mdp5_cfg_init error return
powerpc/pseries/mobility: rebuild cacheinfo hierarchy post-migration
powerpc/cacheinfo: add cacheinfo_teardown, cacheinfo_rebuild
qed: iWARP - Use READ_ONCE and smp_store_release to access ep->state
iommu/vt-d: Duplicate iommu_resv_region objects per device list
mpls: fix warning with multi-label encap
media: vivid: fix incorrect assignment operation when setting video mode
cpufreq: brcmstb-avs-cpufreq: Fix types for voltage/frequency
cpufreq: brcmstb-avs-cpufreq: Fix initial command check
netvsc: unshare skb in VF rx handler
inet: frags: call inet_frags_fini() after unregister_pernet_subsys()
signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig
iommu: Use right function to get group for device
misc: sgi-xp: Properly initialize buf in xpc_get_rsvd_page_pa
serial: stm32: fix wakeup source initialization
serial: stm32: Add support of TC bit status check
serial: stm32: fix transmit_chars when tx is stopped
serial: stm32: fix rx error handling
crypto: ccp - Fix 3DES complaint from ccp-crypto module
crypto: ccp - fix AES CFB error exposed by new test vectors
spi: spi-fsl-spi: call spi_finalize_current_message() at the end
RDMA/qedr: Fix incorrect device rate.
arm64: dts: meson: libretech-cc: set eMMC as removable
dmaengine: tegra210-adma: Fix crash during probe
ARM: dts: sun8i-h3: Fix wifi in Beelink X2 DT
EDAC/mc: Fix edac_mc_find() in case no device is found
thermal: cpu_cooling: Actually trace CPU load in thermal_power_cpu_get_power
backlight: lm3630a: Return 0 on success in update_status functions
kdb: do a sanity check on the cpu in kdb_per_cpu()
ARM: riscpc: fix lack of keyboard interrupts after irq conversion
pwm: meson: Don't disable PWM when setting duty repeatedly
pwm: meson: Consider 128 a valid pre-divider
netfilter: ebtables: CONFIG_COMPAT: reject trailing data after last rule
crypto: caam - fix caam_dump_sg that iterates through scatterlist
platform/x86: alienware-wmi: printing the wrong error code
media: davinci/vpbe: array underflow in vpbe_enum_outputs()
media: omap_vout: potential buffer overflow in vidioc_dqbuf()
l2tp: Fix possible NULL pointer dereference
vfio/mdev: Fix aborting mdev child device removal if one fails
vfio/mdev: Avoid release parent reference during error path
afs: Fix the afs.cell and afs.volume xattr handlers
lightnvm: pblk: fix lock order in pblk_rb_tear_down_check
mmc: core: fix possible use after free of host
dmaengine: tegra210-adma: restore channel status
net: ena: fix ena_com_fill_hash_function() implementation
net: ena: fix incorrect test of supported hash function
net: ena: fix: Free napi resources when ena_up() fails
net: ena: fix swapped parameters when calling ena_com_indirect_table_fill_entry
iommu/vt-d: Make kernel parameter igfx_off work with vIOMMU
IB/mlx5: Add missing XRC options to QP optional params mask
dwc2: gadget: Fix completed transfer size calculation in DDMA
usb: gadget: fsl: fix link error against usb-gadget module
ASoC: fix valid stream condition
packet: in recvmsg msg_name return at least sizeof sockaddr_ll
scsi: qla2xxx: Avoid that qlt_send_resp_ctio() corrupts memory
scsi: qla2xxx: Fix a format specifier
irqchip/gic-v3-its: fix some definitions of inner cacheability attributes
NFS: Don't interrupt file writeout due to fatal errors
ALSA: usb-audio: Handle the error from snd_usb_mixer_apply_create_quirk()
dmaengine: axi-dmac: Don't check the number of frames for alignment
6lowpan: Off by one handling ->nexthdr
media: ov2659: fix unbalanced mutex_lock/unlock
ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnect
powerpc: vdso: Make vdso32 installation conditional in vdso_install
selftests/ipc: Fix msgque compiler warnings
tipc: set sysctl_tipc_rmem and named_timeout right range
platform/x86: alienware-wmi: fix kfree on potentially uninitialized pointer
hwmon: (w83627hf) Use request_muxed_region for Super-IO accesses
net: hns3: fix for vport->bw_limit overflow problem
ARM: pxa: ssp: Fix "WARNING: invalid free of devm_ allocated data"
scsi: target/core: Fix a race condition in the LUN lookup code
scsi: qla2xxx: Unregister chrdev if module initialization fails
ehea: Fix a copy-paste err in ehea_init_port_res
spi: bcm2835aux: fix driver to not allow 65535 (=-1) cs-gpios
soc/fsl/qe: Fix an error code in qe_pin_request()
spi: tegra114: configure dma burst size to fifo trig level
spi: tegra114: flush fifos
spi: tegra114: terminate dma and reset on transfer timeout
spi: tegra114: fix for unpacked mode transfers
spi: tegra114: clear packed bit for unpacked mode
media: tw5864: Fix possible NULL pointer dereference in tw5864_handle_frame
media: davinci-isif: avoid uninitialized variable use
ARM: OMAP2+: Fix potentially uninitialized return value for _setup_reset()
arm64: dts: allwinner: a64: Add missing PIO clocks
m68k: mac: Fix VIA timer counter accesses
tipc: tipc clang warning
jfs: fix bogus variable self-initialization
regulator: tps65086: Fix tps65086_ldoa1_ranges for selector 0xB
media: cx23885: check allocation return
media: wl128x: Fix an error code in fm_download_firmware()
media: cx18: update *pos correctly in cx18_read_pos()
media: ivtv: update *pos correctly in ivtv_read_pos()
regulator: lp87565: Fix missing register for LP87565_BUCK_0
net: sh_eth: fix a missing check of of_get_phy_mode
xen, cpu_hotplug: Prevent an out of bounds access
drivers/rapidio/rio_cm.c: fix potential oops in riocm_ch_listen()
scsi: megaraid_sas: reduce module load time
x86/mm: Remove unused variable 'cpu'
nios2: ksyms: Add missing symbol exports
powerpc/mm: Check secondary hash page table
net: aquantia: fixed instack structure overflow
NFSv4/flexfiles: Fix invalid deref in FF_LAYOUT_DEVID_NODE()
netfilter: nft_set_hash: fix lookups with fixed size hash on big endian
regulator: wm831x-dcdc: Fix list of wm831x_dcdc_ilim from mA to uA
ARM: 8848/1: virt: Align GIC version check with arm64 counterpart
ARM: 8847/1: pm: fix HYP/SVC mode mismatch when MCPM is used
mmc: sdhci-brcmstb: handle mmc_of_parse() errors during probe
NFS/pnfs: Bulk destroy of layouts needs to be safe w.r.t. umount
platform/x86: wmi: fix potential null pointer dereference
clocksource/drivers/exynos_mct: Fix error path in timer resources initialization
clocksource/drivers/sun5i: Fail gracefully when clock rate is unavailable
NFS: Fix a soft lockup in the delegation recovery code
powerpc/64s: Fix logic when handling unknown CPU features
staging: rtlwifi: Use proper enum for return in halmac_parse_psd_data_88xx
fs/nfs: Fix nfs_parse_devname to not modify it's argument
ASoC: qcom: Fix of-node refcount unbalance in apq8016_sbc_parse_of()
drm/nouveau/pmu: don't print reply values if exec is false
drm/nouveau/bios/ramcfg: fix missing parentheses when calculating RON
net: dsa: qca8k: Enable delay for RGMII_ID mode
regulator: pv88090: Fix array out-of-bounds access
regulator: pv88080: Fix array out-of-bounds access
regulator: pv88060: Fix array out-of-bounds access
cdc-wdm: pass return value of recover_from_urb_loss
dmaengine: mv_xor: Use correct device for DMA API
staging: r8822be: check kzalloc return or bail
KVM: PPC: Release all hardware TCE tables attached to a group
hwmon: (pmbus/tps53679) Fix driver info initialization in probe routine
vfio_pci: Enable memory accesses before calling pci_map_rom
keys: Timestamp new keys
block: don't use bio->bi_vcnt to figure out segment number
usb: phy: twl6030-usb: fix possible use-after-free on remove
PCI: endpoint: functions: Use memcpy_fromio()/memcpy_toio()
pinctrl: sh-pfc: sh73a0: Fix fsic_spdif pin groups
pinctrl: sh-pfc: r8a7792: Fix vin1_data18_b pin group
pinctrl: sh-pfc: r8a7791: Fix scifb2_data_c pin group
pinctrl: sh-pfc: emev2: Add missing pinmux functions
drm/etnaviv: potential NULL dereference
iw_cxgb4: use tos when finding ipv6 routes
iw_cxgb4: use tos when importing the endpoint
fbdev: chipsfb: remove set but not used variable 'size'
rtc: pm8xxx: fix unintended sign extension
rtc: 88pm80x: fix unintended sign extension
rtc: 88pm860x: fix unintended sign extension
rtc: ds1307: rx8130: Fix alarm handling
net: phy: fixed_phy: Fix fixed_phy not checking GPIO
thermal: mediatek: fix register index error
rtc: ds1672: fix unintended sign extension
staging: most: cdev: add missing check for cdev_add failure
iwlwifi: mvm: fix RSS config command
ARM: dts: lpc32xx: phy3250: fix SD card regulator voltage
ARM: dts: lpc32xx: fix ARM PrimeCell LCD controller clocks property
ARM: dts: lpc32xx: fix ARM PrimeCell LCD controller variant
ARM: dts: lpc32xx: reparent keypad controller to SIC1
ARM: dts: lpc32xx: add required clocks property to keypad device node
driver core: Do not resume suppliers under device_links_write_lock()
crypto: crypto4xx - Fix wrong ppc4xx_trng_probe()/ppc4xx_trng_remove() arguments
driver: uio: fix possible use-after-free in __uio_register_device
driver: uio: fix possible memory leak in __uio_register_device
tty: ipwireless: Fix potential NULL pointer dereference
iwlwifi: mvm: fix A-MPDU reference assignment
net/mlx5: Take lock with IRQs disabled to avoid deadlock
iwlwifi: mvm: avoid possible access out of array.
clk: sunxi-ng: sun8i-a23: Enable PLL-MIPI LDOs when ungating it
spi/topcliff_pch: Fix potential NULL dereference on allocation error
rtc: cmos: ignore bogus century byte
IB/iser: Pass the correct number of entries for dma mapped SGL
ASoC: imx-sgtl5000: put of nodes if finding codec fails
crypto: tgr192 - fix unaligned memory access
crypto: brcm - Fix some set-but-not-used warning
kbuild: mark prepare0 as PHONY to fix external module build
media: s5p-jpeg: Correct step and max values for V4L2_CID_JPEG_RESTART_INTERVAL
drm/etnaviv: NULL vs IS_ERR() buf in etnaviv_core_dump()
RDMA/iw_cxgb4: Fix the unchecked ep dereference
spi: cadence: Correct initialisation of runtime PM
arm64: dts: apq8016-sbc: Increase load on l11 for SDCARD
drm/shmob: Fix return value check in shmob_drm_probe
RDMA/qedr: Fix out of bounds index check in query pkey
RDMA/ocrdma: Fix out of bounds index check in query pkey
IB/usnic: Fix out of bounds index check in query pkey
MIPS: BCM63XX: drop unused and broken DSP platform device
clk: dove: fix refcount leak in dove_clk_init()
clk: mv98dx3236: fix refcount leak in mv98dx3236_clk_init()
clk: armada-xp: fix refcount leak in axp_clk_init()
clk: kirkwood: fix refcount leak in kirkwood_clk_init()
clk: armada-370: fix refcount leak in a370_clk_init()
clk: vf610: fix refcount leak in vf610_clocks_init()
clk: imx7d: fix refcount leak in imx7d_clocks_init()
clk: imx6sx: fix refcount leak in imx6sx_clocks_init()
clk: imx6q: fix refcount leak in imx6q_clocks_init()
clk: samsung: exynos4: fix refcount leak in exynos4_get_xom()
clk: socfpga: fix refcount leak
clk: qoriq: fix refcount leak in clockgen_init()
clk: highbank: fix refcount leak in hb_clk_init()
Input: nomadik-ske-keypad - fix a loop timeout test
vxlan: changelink: Fix handling of default remotes
pinctrl: sh-pfc: sh7734: Remove bogus IPSR10 value
pinctrl: sh-pfc: sh7269: Add missing PCIOR0 field
pinctrl: sh-pfc: r8a77995: Remove bogus SEL_PWM[0-3]_3 configurations
pinctrl: sh-pfc: sh7734: Add missing IPSR11 field
pinctrl: sh-pfc: r8a7794: Remove bogus IPSR9 field
pinctrl: sh-pfc: sh73a0: Add missing TO pin to tpu4_to3 group
pinctrl: sh-pfc: r8a7791: Remove bogus marks from vin1_b_data18 group
pinctrl: sh-pfc: r8a7791: Remove bogus ctrl marks from qspi_data4_b group
pinctrl: sh-pfc: r8a7740: Add missing LCD0 marks to lcd0_data24_1 group
pinctrl: sh-pfc: r8a7740: Add missing REF125CK pin to gether_gmii group
switchtec: Remove immediate status check after submitting MRPC command
staging: bcm2835-camera: Abort probe if there is no camera
IB/rxe: Fix incorrect cache cleanup in error flow
net: phy: Fix not to call phy_resume() if PHY is not attached
drm/dp_mst: Skip validating ports during destruction, just ref
exportfs: fix 'passing zero to ERR_PTR()' warning
pcrypt: use format specifier in kobject_add
NTB: ntb_hw_idt: replace IS_ERR_OR_NULL with regular NULL checks
mlxsw: reg: QEEC: Add minimum shaper fields
drm/sun4i: hdmi: Fix double flag assignation
pwm: lpss: Release runtime-pm reference from the driver's remove callback
staging: comedi: ni_mio_common: protect register write overflow
ALSA: usb-audio: update quirk for B&W PX to remove microphone
IB/hfi1: Add mtu check for operational data VLs
IB/rxe: replace kvfree with vfree
drm/hisilicon: hibmc: Don't overwrite fb helper surface depth
PCI: iproc: Remove PAXC slot check to allow VF support
apparmor: don't try to replace stale label in ptrace access check
ALSA: hda: fix unused variable warning
drm/virtio: fix bounds check in virtio_gpu_cmd_get_capset()
drm/sti: do not remove the drm_bridge that was never added
crypto: sun4i-ss - fix big endian issues
mt7601u: fix bbp version check in mt7601u_wait_bbp_ready
tipc: fix wrong timeout input for tipc_wait_for_cond()
powerpc/archrandom: fix arch_get_random_seed_int()
mfd: intel-lpss: Add default I2C device properties for Gemini Lake
xfs: Sanity check flags of Q_XQUOTARM call
FROMGIT: ext4: Add EXT4_IOC_FSGETXATTR/EXT4_IOC_FSSETXATTR to compat_ioctl.
ANDROID: cuttlefish_defconfig: enable CONFIG_IKHEADERS as m
ANDROID: cuttlefish_defconfig: enable NVDIMM/PMEM options
UPSTREAM: virtio-pmem: Add virtio pmem driver
BACKPORT: libnvdimm: nd_region flush callback support
UPSTREAM: libnvdimm/of_pmem: Provide a unique name for bus provider
UPSTREAM: libnvdimm/of_pmem: Fix platform_no_drv_owner.cocci warnings
UPSTREAM: libnvdimm, of_pmem: use dev_to_node() instead of of_node_to_nid()
UPSTREAM: libnvdimm: Add device-tree based driver
UPSTREAM: libnvdimm: Add of_node to region and bus descriptors
FROMLIST: security: selinux: allow per-file labelling for binderfs
UPSTREAM: mm/page_io.c: annotate refault stalls from swap_readpage
Revert "ANDROID: security,perf: Allow further restriction of perf_event_open"
ANDROID: selinux: modify RTM_GETLINK permission
UPSTREAM: lib/test_meminit.c: add bulk alloc/free tests
UPSTREAM: lib/test_meminit: add a kmem_cache_alloc_bulk() test
UPSTREAM: mm: slub: really fix slab walking for init_on_free
UPSTREAM: mm/slub.c: init_on_free=1 should wipe freelist ptr for bulk allocations
Conflicts:
drivers/mmc/core/quirks.h
include/uapi/linux/virtio_ids.h
New header file entries are added to .bp files.
Change-Id: I515cb78684f524e239850625b163ba023b517e10
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
[ Upstream commit 0f29456d08042134aff6e562d07a6365c841c4ad ]
Some definitions of Inner Cacheability attibutes need to be corrected.
Fixes: 8c828a535e ("irqchip/gicv3-its: Restore all cacheability attributes")
Signed-off-by: Hongbo Yao <yaohongbo@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Add APIs to show pending interrupts in GIC, and next highest
priority interrupt on the current cpu.
Change-Id: Icde27deb7f0a32450ff8f5296e6a175b3559b7af
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
Signed-off-by: Gaurav Kohli <gkohli@codeaurora.org>
[ Upstream commit 56841070ccc87b463ac037d2d1f2beb8e5e35f0c ]
According to ARM IHI 0069C (ID070116), we should use GITS_TYPER's
bits [7:4] as ITT_entry_size instead of [8:4]. Although this is
pretty annoying, it only results in a potential over-allocation
of memory, and nothing bad happens.
Fixes: 3dfa576bfb ("irqchip/gic-v3-its: Add probing for VLPI properties")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
[maz: massaged subject and commit message]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 16ca6a607d84bef0129698d8d808f501afd08d43 upstream.
The vgic code is trying to be clever when injecting GICv2 SGIs,
and will happily populate LRs with the same interrupt number if
they come from multiple vcpus (after all, they are distinct
interrupt sources).
Unfortunately, this is against the letter of the architecture,
and the GICv2 architecture spec says "Each valid interrupt stored
in the List registers must have a unique VirtualID for that
virtual CPU interface.". GICv3 has similar (although slightly
ambiguous) restrictions.
This results in guests locking up when using GICv2-on-GICv3, for
example. The obvious fix is to stop trying so hard, and inject
a single vcpu per SGI per guest entry. After all, pending SGIs
with multiple source vcpus are pretty rare, and are mostly seen
in scenario where the physical CPUs are severely overcomitted.
But as we now only inject a single instance of a multi-source SGI per
vcpu entry, we may delay those interrupts for longer than strictly
necessary, and run the risk of injecting lower priority interrupts
in the meantime.
In order to address this, we adopt a three stage strategy:
- If we encounter a multi-source SGI in the AP list while computing
its depth, we force the list to be sorted
- When populating the LRs, we prevent the injection of any interrupt
of lower priority than that of the first multi-source SGI we've
injected.
- Finally, the injection of a multi-source SGI triggers the request
of a maintenance interrupt when there will be no pending interrupt
in the LRs (HCR_NPIE).
At the point where the last pending interrupt in the LRs switches
from Pending to Active, the maintenance interrupt will be delivered,
allowing us to add the remaining SGIs using the same process.
Cc: stable@vger.kernel.org
Fixes: 0919e84c0f ("KVM: arm/arm64: vgic-new: Add IRQ sync/flush framework")
Acked-by: Christoffer Dall <cdall@kernel.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current ITS driver works fine as long as normal memory and GICR
regions are located within the lower 48bit (>=0 && <2^48) physical
address space. Some of the registers GICR_PEND/PROP, GICR_VPEND/VPROP
and GITS_CBASER are handled properly but not all when configuring
the hardware with 52bit physical address.
This patch does the following changes to support 52bit PA.
-Handle 52bit PA in GITS_BASERn.
-Fix ITT_addr width to 52bits, bits[51:8].
-Fix RDbase width to 52bits, bits[51:16].
-Fix VPT_addr width to 52bits, bits[51:16].
Definition of the GITS_BASERn register when ITS PageSize is 64KB:
-Bits[47:16] of the register provide bits[47:16] of the table PA.
-Bits[15:12] of the register provide bits[51:48] of the table PA.
-Bits[15:00] of the base physical address are 0.
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Pull MIPS updates from Ralf Baechle:
"This is the main pull request for 4.14 for MIPS; below a summary of
the non-merge commits:
CM:
- Rename mips_cm_base to mips_gcr_base
- Specify register size when generating accessors
- Use BIT/GENMASK for register fields, order & drop shifts
- Add cluster & block args to mips_cm_lock_other()
CPC:
- Use common CPS accessor generation macros
- Use BIT/GENMASK for register fields, order & drop shifts
- Introduce register modify (set/clear/change) accessors
- Use change_*, set_* & clear_* where appropriate
- Add CM/CPC 3.5 register definitions
- Use GlobalNumber macros rather than magic numbers
- Have asm/mips-cps.h include CM & CPC headers
- Cluster support for topology functions
- Detect CPUs in secondary clusters
CPS:
- Read GIC_VL_IDENT directly, not via irqchip driver
DMA:
- Consolidate coherent and non-coherent dma_alloc code
- Don't use dma_cache_sync to implement fd_cacheflush
FPU emulation / FP assist code:
- Another series of 14 commits fixing corner cases such as NaN
propgagation and other special input values.
- Zero bits 32-63 of the result for a CLASS.D instruction.
- Enhanced statics via debugfs
- Do not use bools for arithmetic. GCC 7.1 moans about this.
- Correct user fault_addr type
Generic MIPS:
- Enhancement of stack backtraces
- Cleanup from non-existing options
- Handle non word sized instructions when examining frame
- Fix detection and decoding of ADDIUSP instruction
- Fix decoding of SWSP16 instruction
- Refactor handling of stack pointer in get_frame_info
- Remove unreachable code from force_fcr31_sig()
- Convert to using %pOF instead of full_name
- Remove the R6000 support.
- Move FP code from *_switch.S to *_fpu.S
- Remove unused ST_OFF from r2300_switch.S
- Allow platform to specify multiple its.S files
- Add #includes to various files to ensure code builds reliable and
without warning..
- Remove __invalidate_kernel_vmap_range
- Remove plat_timer_setup
- Declare various variables & functions static
- Abstract CPU core & VP(E) ID access through accessor functions
- Store core & VP IDs in GlobalNumber-style variable
- Unify checks for sibling CPUs
- Add CPU cluster number accessors
- Prevent direct use of generic_defconfig
- Make CONFIG_MIPS_MT_SMP default y
- Add __ioread64_copy
- Remove unnecessary inclusions of linux/irqchip/mips-gic.h
GIC:
- Introduce asm/mips-gic.h with accessor functions
- Use new GIC accessor functions in mips-gic-timer
- Remove counter access functions from irq-mips-gic.c
- Remove gic_read_local_vp_id() from irq-mips-gic.c
- Simplify shared interrupt pending/mask reads in irq-mips-gic.c
- Simplify gic_local_irq_domain_map() in irq-mips-gic.c
- Drop gic_(re)set_mask() functions in irq-mips-gic.c
- Remove gic_set_polarity(), gic_set_trigger(), gic_set_dual_edge(),
gic_map_to_pin() and gic_map_to_vpe() from irq-mips-gic.c.
- Convert remaining shared reg access, local int mask access and
remaining local reg access to new accessors
- Move GIC_LOCAL_INT_* to asm/mips-gic.h
- Remove GIC_CPU_INT* macros from irq-mips-gic.c
- Move various definitions to the driver
- Remove gic_get_usm_range()
- Remove __gic_irq_dispatch() forward declaration
- Remove gic_init()
- Use mips_gic_present() in place of gic_present and remove
gic_present
- Move gic_get_c0_*_int() to asm/mips-gic.h
- Remove linux/irqchip/mips-gic.h
- Inline __gic_init()
- Inline gic_basic_init()
- Make pcpu_masks a per-cpu variable
- Use pcpu_masks to avoid reading GIC_SH_MASK*
- Clean up mti, reserved-cpu-vectors handling
- Use cpumask_first_and() in gic_set_affinity()
- Let the core set struct irq_common_data affinity
microMIPS:
- Fix microMIPS stack unwinding on big endian systems
MIPS-GIC:
- SYNC after enabling GIC region
NUMA:
- Remove the unused parent_node() macro
R6:
- Constify r2_decoder_tables
- Add accessor & bit definitions for GlobalNumber
SMP:
- Constify smp ops
- Allow boot_secondary SMP op to return errors
VDSO:
- Drop gic_get_usm_range() usage
- Avoid use of linux/irqchip/mips-gic.h
Platform changes:
Alchemy:
- Add devboard machine type to cpuinfo
- update cpu feature overrides
- Threaded carddetect irqs for devboards
AR7:
- allow NULL clock for clk_get_rate
BCM63xx:
- Fix ENETDMA_6345_MAXBURST_REG offset
- Allow NULL clock for clk_get_rate
CI20:
- Enable GPIO and RTC drivers in defconfig
- Add ethernet and fixed-regulator nodes to DTS
Generic platform:
- Move Boston and NI 169445 FIT image source to their own files
- Include asm/bootinfo.h for plat_fdt_relocated()
- Include asm/time.h for get_c0_*_int()
- Include asm/bootinfo.h for plat_fdt_relocated()
- Include asm/time.h for get_c0_*_int()
- Allow filtering enabled boards by requirements
- Don't explicitly disable CONFIG_USB_SUPPORT
- Bump default NR_CPUS to 16
JZ4700:
- Probe the jz4740-rtc driver from devicetree
Lantiq:
- Drop check of boot select from the spi-falcon driver.
- Drop check of boot select from the lantiq-flash MTD driver.
- Access boot cause register in the watchdog driver through regmap
- Add device tree binding documentation for the watchdog driver
- Add docs for the RCU DT bindings.
- Convert the fpi bus driver to a platform_driver
- Remove ltq_reset_cause() and ltq_boot_select(
- Switch to a proper reset driver
- Switch to a new drivers/soc GPHY driver
- Add an USB PHY driver for the Lantiq SoCs using the RCU module
- Use of_platform_default_populate instead of __dt_register_buses
- Enable MFD_SYSCON to be able to use it for the RCU MFD
- Replace ltq_boot_select() with dummy implementation.
Loongson 2F:
- Allow NULL clock for clk_get_rate
Malta:
- Use new GIC accessor functions
NI 169445:
- Add support for NI 169445 board.
- Only include in 32r2el kernels
Octeon:
- Add support for watchdog of 78XX SOCs.
- Add support for watchdog of CN68XX SOCs.
- Expose support for mips32r1, mips32r2 and mips64r1
- Enable more drivers in config file
- Add support for accessing the boot vector.
- Remove old boot vector code from watchdog driver
- Define watchdog registers for 70xx, 73xx, 78xx, F75xx.
- Make CSR functions node aware.
- Allow access to CIU3 IRQ domains.
- Misc cleanups in the watchdog driver
Omega2+:
- New board, add support and defconfig
Pistachio:
- Enable Root FS on NFS in defconfig
Ralink:
- Add Mediatek MT7628A SoC
- Allow NULL clock for clk_get_rate
- Explicitly request exclusive reset control in the pci-mt7620 PCI driver.
SEAD3:
- Only include in 32 bit kernels by default
VoCore:
- Add VoCore as a vendor t0 dt-bindings
- Add defconfig file"
* '4.14-features' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (167 commits)
MIPS: Refactor handling of stack pointer in get_frame_info
MIPS: Stacktrace: Fix microMIPS stack unwinding on big endian systems
MIPS: microMIPS: Fix decoding of swsp16 instruction
MIPS: microMIPS: Fix decoding of addiusp instruction
MIPS: microMIPS: Fix detection of addiusp instruction
MIPS: Handle non word sized instructions when examining frame
MIPS: ralink: allow NULL clock for clk_get_rate
MIPS: Loongson 2F: allow NULL clock for clk_get_rate
MIPS: BCM63XX: allow NULL clock for clk_get_rate
MIPS: AR7: allow NULL clock for clk_get_rate
MIPS: BCM63XX: fix ENETDMA_6345_MAXBURST_REG offset
mips: Save all registers when saving the frame
MIPS: Add DWARF unwinding to assembly
MIPS: Make SAVE_SOME more standard
MIPS: Fix issues in backtraces
MIPS: jz4780: DTS: Probe the jz4740-rtc driver from devicetree
MIPS: Ci20: Enable RTC driver
watchdog: octeon-wdt: Add support for 78XX SOCs.
watchdog: octeon-wdt: Add support for cn68XX SOCs.
watchdog: octeon-wdt: File cleaning.
...
Our VDSO code makes use of macros from linux/irqchip/mips-gic.h to
provide offsets to register values, but these are trivial offsets to the
two 32 bit halves of a 64 bit value. Replace use of the macros with zero
(ie. omit adding an offset) and the size of the low 32 bit of the value.
This removes our need for linux/irqchip/mips-gic.h & prepares us for it
to be removed.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17047/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
As KVM needs to know about the availability of GICv4 to enable
direct injection of interrupts, let's advertise the feature in
the gic_kvm_info structure.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
When creating a VM, it is very convenient to have an irq domain
containing all the doorbell interrupts associated with that VM
(each interrupt representing a VPE).
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
A long time ago, GITS_CTLR[1] used to be called GITC_CTLR.EnableVLPI.
It has been subsequently deprecated and is now an "Implementation
Defined" bit that may ot may not be set for GICv4. Brilliant.
And the current crop of the FastModel requires that bit for VLPIs
to be enabled. Oh well... Let's set it and find out what breaks.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
When we don't have the DirectLPI feature, we must work around the
architecture shortcomings to be able to perform the required
maintenance (interrupt masking, clearing and injection).
For this, we create a fake device whose sole purpose is to
provide a way to issue commands as if we were dealing with LPIs
coming from that device (while they actually originate from
the ITS). This fake device doesn't have LPIs allocated to it,
but instead uses the VPE LPIs.
Of course, this could be a real bottleneck, and a naive
implementation would require 6 commands to issue an invalidation.
Instead, let's allocate at least one event per physical CPU
(rounded up to the next power of 2), and opportunistically
map the VPE doorbell to an event. This doorbell will be mapped
until we roll over and need to reallocate this slot.
This ensures that most of the time, we only need 2 commands
to issue an INV, INT or CLEAR, making the performance a lot
better, given that we always issue a CLEAR on entry, and
an INV on each side of a trapped WFI.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
When a VPE is scheduled to run, the corresponding redistributor must
be told so, by setting VPROPBASER to the VM's property table, and
VPENDBASER to the vcpu's pending table.
When scheduled out, we preserve the IDAI and PendingLast bits. The
latter is specially important, as it tells the hypervisor that
there are pending interrupts for this vcpu.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
V{PEND,PROP}BASER being 64bit registers, they need some ad-hoc
accessors on 32bit, specially given that VPENDBASER contains
a Valid bit, making the access a bit convoluted.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Add the new GICv4 ITS command definitions, most of them, being
defined in terms of their physical counterparts.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Add a bunch of GICv4-specific data structures that will get used in
subsequent patches.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Add the probing code for the ITS VLPI support. This includes
configuring the ITS number if not supporting the single VMOVP
command feature.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Now that we're able to safely handle common sysreg access, let's
give the user the opportunity to enable it by passing a specific
command-line option (vgic_v3.common_trap).
Tested-by: Alexander Graf <agraf@suse.de>
Acked-by: David Daney <david.daney@cavium.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
In order to be able to trap Group-0 GICv3 system registers, we need to
set ICH_HCR_EL2.TALL0 begore entering the guest. This is conditionnaly
done after having restored the guest's state, and cleared on exit.
Tested-by: Alexander Graf <agraf@suse.de>
Acked-by: David Daney <david.daney@cavium.com>
Acked-by: Christoffer Dall <cdall@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
In order to be able to trap Group-1 GICv3 system registers, we need to
set ICH_HCR_EL2.TALL1 before entering the guest. This is conditionally
done after having restored the guest's state, and cleared on exit.
Tested-by: Alexander Graf <agraf@suse.de>
Acked-by: David Daney <david.daney@cavium.com>
Acked-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Add a handler for writing the guest's view of the ICC_EOIR1_EL1
register. This involves dropping the priority of the interrupt,
and deactivating it if required (EOImode == 0).
Tested-by: Alexander Graf <agraf@suse.de>
Acked-by: David Daney <david.daney@cavium.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Add a handler for reading the guest's view of the ICC_IAR1_EL1
register. This involves finding the highest priority Group-1
interrupt, checking against both PMR and the active group
priority, activating the interrupt and setting the group
priority as active.
Tested-by: Alexander Graf <agraf@suse.de>
Acked-by: David Daney <david.daney@cavium.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
We have been a little loose with our intermediate VMCR representation
where we had a 'ctlr' field, but we failed to differentiate between the
GICv2 GICC_CTLR and ICC_CTLR_EL1 layouts, and therefore ended up mapping
the wrong bits into the individual fields of the ICH_VMCR_EL2 when
emulating a GICv2 on a GICv3 system.
Fix this by using explicit fields for the VMCR bits instead.
Cc: Eric Auger <eric.auger@redhat.com>
Reported-by: wanghaibin <wanghaibin.wang@huawei.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Second round of KVM/ARM Changes for v4.12.
Changes include:
- A fix related to the 32-bit idmap stub
- A fix to the bitmask used to deode the operands of an AArch32 CP
instruction
- We have moved the files shared between arch/arm/kvm and
arch/arm64/kvm to virt/kvm/arm
- We add support for saving/restoring the virtual ITS state to
userspace
