Commit Graph

236 Commits

Author SHA1 Message Date
balgxmr
434f599332 Merge branch 'upstream-linux-4.14.y' of https://android.googlesource.com/kernel/common into rebase 2023-08-09 16:44:33 -05:00
Xiu Jianfeng
467a830573 cgroup: Do not corrupt task iteration when rebinding subsystem
commit 6f363f5aa845561f7ea496d8b1175e3204470486 upstream.

We found a refcount UAF bug as follows:

refcount_t: addition on 0; use-after-free.
WARNING: CPU: 1 PID: 342 at lib/refcount.c:25 refcount_warn_saturate+0xa0/0x148
Workqueue: events cpuset_hotplug_workfn
Call trace:
 refcount_warn_saturate+0xa0/0x148
 __refcount_add.constprop.0+0x5c/0x80
 css_task_iter_advance_css_set+0xd8/0x210
 css_task_iter_advance+0xa8/0x120
 css_task_iter_next+0x94/0x158
 update_tasks_root_domain+0x58/0x98
 rebuild_root_domains+0xa0/0x1b0
 rebuild_sched_domains_locked+0x144/0x188
 cpuset_hotplug_workfn+0x138/0x5a0
 process_one_work+0x1e8/0x448
 worker_thread+0x228/0x3e0
 kthread+0xe0/0xf0
 ret_from_fork+0x10/0x20

then a kernel panic will be triggered as below:

Unable to handle kernel paging request at virtual address 00000000c0000010
Call trace:
 cgroup_apply_control_disable+0xa4/0x16c
 rebind_subsystems+0x224/0x590
 cgroup_destroy_root+0x64/0x2e0
 css_free_rwork_fn+0x198/0x2a0
 process_one_work+0x1d4/0x4bc
 worker_thread+0x158/0x410
 kthread+0x108/0x13c
 ret_from_fork+0x10/0x18

The race that cause this bug can be shown as below:

(hotplug cpu)                | (umount cpuset)
mutex_lock(&cpuset_mutex)    | mutex_lock(&cgroup_mutex)
cpuset_hotplug_workfn        |
 rebuild_root_domains        |  rebind_subsystems
  update_tasks_root_domain   |   spin_lock_irq(&css_set_lock)
   css_task_iter_start       |    list_move_tail(&cset->e_cset_node[ss->id]
   while(css_task_iter_next) |                  &dcgrp->e_csets[ss->id]);
   css_task_iter_end         |   spin_unlock_irq(&css_set_lock)
mutex_unlock(&cpuset_mutex)  | mutex_unlock(&cgroup_mutex)

Inside css_task_iter_start/next/end, css_set_lock is hold and then
released, so when iterating task(left side), the css_set may be moved to
another list(right side), then it->cset_head points to the old list head
and it->cset_pos->next points to the head node of new list, which can't
be used as struct css_set.

To fix this issue, switch from all css_sets to only scgrp's css_sets to
patch in-flight iterators to preserve correct iteration, and then
update it->cset_head as well.

Reported-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://www.spinics.net/lists/cgroups/msg37935.html
Suggested-by: Michal Koutný <mkoutny@suse.com>
Link: https://lore.kernel.org/all/20230526114139.70274-1-xiujianfeng@huaweicloud.com/
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Fixes: 2d8f243a5e ("cgroup: implement cgroup->e_csets[]")
Cc: stable@vger.kernel.org # v3.16+
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-28 10:14:19 +02:00
Waiman Long
37647d951a cgroup/cpuset: Wake up cpuset_attach_wq tasks in cpuset_cancel_attach()
commit ba9182a89626d5f83c2ee4594f55cb9c1e60f0e2 upstream.

After a successful cpuset_can_attach() call which increments the
attach_in_progress flag, either cpuset_cancel_attach() or cpuset_attach()
will be called later. In cpuset_attach(), tasks in cpuset_attach_wq,
if present, will be woken up at the end. That is not the case in
cpuset_cancel_attach(). So missed wakeup is possible if the attach
operation is somehow cancelled. Fix that by doing the wakeup in
cpuset_cancel_attach() as well.

Fixes: e44193d39e ("cpuset: let hotplug propagation work wait for task attaching")
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Cc: stable@vger.kernel.org # v3.11+
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-20 12:02:12 +02:00
Tejun Heo
b77600e26f memcg: fix possible use-after-free in memcg_write_event_control()
commit 4a7ba45b1a435e7097ca0f79a847d0949d0eb088 upstream.

memcg_write_event_control() accesses the dentry->d_name of the specified
control fd to route the write call.  As a cgroup interface file can't be
renamed, it's safe to access d_name as long as the specified file is a
regular cgroup file.  Also, as these cgroup interface files can't be
removed before the directory, it's safe to access the parent too.

Prior to 347c4a8747 ("memcg: remove cgroup_event->cft"), there was a
call to __file_cft() which verified that the specified file is a regular
cgroupfs file before further accesses.  The cftype pointer returned from
__file_cft() was no longer necessary and the commit inadvertently dropped
the file type check with it allowing any file to slip through.  With the
invarients broken, the d_name and parent accesses can now race against
renames and removals of arbitrary files and cause use-after-free's.

Fix the bug by resurrecting the file type check in __file_cft().  Now that
cgroupfs is implemented through kernfs, checking the file operations needs
to go through a layer of indirection.  Instead, let's check the superblock
and dentry type.

Link: https://lkml.kernel.org/r/Y5FRm/cfcKPGzWwl@slm.duckdns.org
Fixes: 347c4a8747 ("memcg: remove cgroup_event->cft")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jann Horn <jannh@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: <stable@vger.kernel.org>	[3.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-14 11:26:13 +01:00
Kees Cook
16aabcb8e0 treewide: Use array_size() in vmalloc()
The vmalloc() function has no 2-factor argument form, so multiplication
factors need to be wrapped in array_size(). This patch replaces cases of:

        vmalloc(a * b)

with:
        vmalloc(array_size(a, b))

as well as handling cases of:

        vmalloc(a * b * c)

with:

        vmalloc(array3_size(a, b, c))

This does, however, attempt to ignore constant size factors like:

        vmalloc(4 * 1024)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  vmalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  vmalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  vmalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  vmalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
  vmalloc(
-	sizeof(TYPE) * (COUNT_ID)
+	array_size(COUNT_ID, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(TYPE) * COUNT_ID
+	array_size(COUNT_ID, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(TYPE) * (COUNT_CONST)
+	array_size(COUNT_CONST, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(TYPE) * COUNT_CONST
+	array_size(COUNT_CONST, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(THING) * (COUNT_ID)
+	array_size(COUNT_ID, sizeof(THING))
  , ...)
|
  vmalloc(
-	sizeof(THING) * COUNT_ID
+	array_size(COUNT_ID, sizeof(THING))
  , ...)
|
  vmalloc(
-	sizeof(THING) * (COUNT_CONST)
+	array_size(COUNT_CONST, sizeof(THING))
  , ...)
|
  vmalloc(
-	sizeof(THING) * COUNT_CONST
+	array_size(COUNT_CONST, sizeof(THING))
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

  vmalloc(
-	SIZE * COUNT
+	array_size(COUNT, SIZE)
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  vmalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  vmalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  vmalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  vmalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  vmalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  vmalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  vmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  vmalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  vmalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  vmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  vmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  vmalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  vmalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  vmalloc(C1 * C2 * C3, ...)
|
  vmalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants.
@@
expression E1, E2;
constant C1, C2;
@@

(
  vmalloc(C1 * C2, ...)
|
  vmalloc(
-	E1 * E2
+	array_size(E1, E2)
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Adam W. Willis <return.of.octobot@gmail.com>
Signed-off-by: Fiqri Ardyansyah <fiqri15072019@gmail.com>
2022-10-07 11:27:36 +03:00
Kees Cook
b6399c388a treewide: kmalloc() -> kmalloc_array()
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This
patch replaces cases of:

        kmalloc(a * b, gfp)

with:
        kmalloc_array(a * b, gfp)

as well as handling cases of:

        kmalloc(a * b * c, gfp)

with:

        kmalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kmalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kmalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The tools/ directory was manually excluded, since it has its own
implementation of kmalloc().

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kmalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kmalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kmalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kmalloc
+ kmalloc_array
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kmalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kmalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kmalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kmalloc(sizeof(THING) * C2, ...)
|
  kmalloc(sizeof(TYPE) * C2, ...)
|
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(C1 * C2, ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Adam W. Willis <return.of.octobot@gmail.com>
Signed-off-by: Fiqri Ardyansyah <fiqri15072019@gmail.com>
2022-10-07 11:19:36 +03:00
Kees Cook
a143b6702e treewide: Use struct_size() for kmalloc()-family
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:

struct foo {
    int stuff;
    void *entry[];
};

instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL);

This patch makes the changes for kmalloc()-family (and kvmalloc()-family)
uses. It was done via automatic conversion with manual review for the
"CHECKME" non-standard cases noted below, using the following Coccinelle
script:

// pkey_cache = kmalloc(sizeof *pkey_cache + tprops->pkey_tbl_len *
//                      sizeof *pkey_cache->table, GFP_KERNEL);
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
identifier VAR, ELEMENT;
expression COUNT;
@@

- alloc(sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP)
+ alloc(struct_size(VAR, ELEMENT, COUNT), GFP)

// mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL);
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
identifier VAR, ELEMENT;
expression COUNT;
@@

- alloc(sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP)
+ alloc(struct_size(VAR, ELEMENT, COUNT), GFP)

// Same pattern, but can't trivially locate the trailing element name,
// or variable name.
@@
identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc";
expression GFP;
expression SOMETHING, COUNT, ELEMENT;
@@

- alloc(sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP)
+ alloc(CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP)

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Adam W. Willis <return.of.octobot@gmail.com>
Signed-off-by: Fiqri Ardyansyah <fiqri15072019@gmail.com>
2022-10-07 11:19:35 +03:00
Andrzej Perczak
54329ba9ce uclamp_assist: Tune parameters 2022-09-22 17:33:18 +03:00
darkhz
854125967a uclamp_assist: Refactor and implement
This is based on:
7725cb5bc1

With the following modifications:
- Completely remove CPUSET_ASSIST dependency
- Fix potential bootloop issues on some devices
- Place the Kconfig entry appropriately
- Improve code styling and readability
2022-09-22 17:33:18 +03:00
darkhz
b9be58948d sched/uclamp: Use wrappers for *_{read, write, show} functions
In commit:
    sched/uclamp: Move all tunables to cpusets,

We directly modified and exported *_{read, write, show} functions
to cpuset code.This makes the resulting code quite inconsistent with
the upstream version.

We now use wrappers to reflect the original function, and to preserve
the code in accordance with upstream/mainline.

This is a purely cosmetic change, and no new behaviour should be
exhibited on applying this commit.
2022-09-22 17:33:18 +03:00
darkhz
2ba1fcdf13 sched/uclamp: Create a new uclamp.boosted tunable
This complements the previous patch:
sched/uclamp: Make uclamp_boosted() return proper boosted value

We now can modify boost values for each taskgroup, just like in
SchedTune, and uclamp_boosted() will correctly return the boost
settings for the taskgroup.
2022-09-22 17:33:18 +03:00
darkhz
2dbbe9174b sched/uclamp: Move all tunables to cpusets
The following tunables:
        uclamp.min
        uclamp.max
        uclamp.latency_sensitive

were created in /dev/cpuctl by default.There are two problems here:

- There is only the root cgroup in /dev/cpuctl where all the tasks are
  present in the same cgroup, therefore there was no control over
  different types of tasks,hence improper boosting/capping of certain
  processes occurred.

- Since the tunables are CFTYPE_NOT_ON_ROOT, those tunables are
  inaccessible also due to the above point.

Hence, we move them to the /dev/cpuset group, where different processes
are appropriately grouped in various cgroups, and we can appropriately
set proper uclamp.{max,min,latency_sensitive} values for said cgroups,
since those tunables are now visible
2022-09-22 17:33:17 +03:00
Sebastian Andrzej Siewior
ee4b678439 kernel: sched: Provide a pointer to the valid CPU mask
In commit 4b53a3412d ("sched/core: Remove the tsk_nr_cpus_allowed()
wrapper") the tsk_nr_cpus_allowed() wrapper was removed. There was not
much difference in !RT but in RT we used this to implement
migrate_disable(). Within a migrate_disable() section the CPU mask is
restricted to single CPU while the "normal" CPU mask remains untouched.

As an alternative implementation Ingo suggested to use
	struct task_struct {
		const cpumask_t		*cpus_ptr;
		cpumask_t		cpus_mask;
        };
with
	t->cpus_allowed_ptr = &t->cpus_allowed;

In -RT we then can switch the cpus_ptr to
	t->cpus_allowed_ptr = &cpumask_of(task_cpu(p));

in a migration disabled region. The rules are simple:
- Code that 'uses' ->cpus_allowed would use the pointer.
- Code that 'modifies' ->cpus_allowed would use the direct mask.

While converting the existing users I tried to stick with the rules
above however… well mostly CPUFREQ tries to temporary switch the CPU
mask to do something on a certain CPU and then switches the mask back it
its original value. So in theory `cpus_ptr' could or should be used.
However if this is invoked in a migration disabled region (which is not
the case because it would require something like preempt_disable() and
set_cpus_allowed_ptr() might sleep so it can't be) then the "restore"
part would restore the wrong mask. So it only looks strange and I go for
the pointer…

Some drivers copy the cpumask without cpumask_copy() and others use
cpumask_copy but without alloc_cpumask_var(). I did not fix those as
part of this, could do this as a follow up…

So is this the way we want it?
Is the usage of `cpus_ptr' vs `cpus_mask' for the set + restore part
(see cpufreq users) what we want? At some point it looks like they
should use a different interface for their doing. I am not sure why
switching to certain CPU is important but maybe it could be done via a
workqueue from the CPUFREQ core (so we have a comment desribing why are
doing this and a get_online_cpus() to ensure that the CPU does not go
offline too early).

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[Sultan Alsawaf: adapt to floral]
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
2022-09-22 17:33:17 +03:00
kondors1995
b43cb261c3 Revert "kernel: sched: Provide a pointer to the valid CPU mask"
This reverts commit bc314749e9.
2022-09-22 17:33:16 +03:00
Tejun Heo
c6594bfa62 UPSTREAM: cgroup: add cgroup_parse_float()
cgroup already uses floating point for percent[ile] numbers and there
are several controllers which want to take them as input.  Add a
generic parse helper to handle inputs.

Update the interface convention documentation about the use of
percentage numbers.  While at it, also clarify the default time unit.

Bug: 120440300
Signed-off-by: Tejun Heo <tj@kernel.org>
(cherry picked from commit a5e112e6424adb77d953eac20e6936b952fd6b32)
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Change-Id: Ic1fcf21d7955eb8edd2e8e91517bca6aef41694f
Signed-off-by: Quentin Perret <qperret@google.com>
2022-09-22 17:32:55 +03:00
pwnrazr
4d1f3b1e36 Merge remote-tracking branch 'android-stable/android-4.14-stable' into dev-base 2022-07-25 07:09:46 +00:00
Suren Baghdasaryan
36ecaf316e BACKPORT: psi: Fix uaf issue when psi trigger is destroyed while being polled
commit a06247c6804f1a7c86a2e5398a4c1f1db1471848 upstream.

With write operation on psi files replacing old trigger with a new one,
the lifetime of its waitqueue is totally arbitrary. Overwriting an
existing trigger causes its waitqueue to be freed and pending poll()
will stumble on trigger->event_wait which was destroyed.
Fix this by disallowing to redefine an existing psi trigger. If a write
operation is used on a file descriptor with an already existing psi
trigger, the operation will fail with EBUSY error.
Also bypass a check for psi_disabled in the psi_trigger_destroy as the
flag can be flipped after the trigger is created, leading to a memory
leak.

Fixes: 0e94682b73bf ("psi: introduce psi monitor")
Reported-by: syzbot+cdb5dd11c97cc532efad@syzkaller.appspotmail.com
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Analyzed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220111232309.1786347-1-surenb@google.com
[surenb: backported to 5.10 kernel]
CC: stable@vger.kernel.org # 5.10
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Conflicts:
        include/linux/psi.h
        kernel/cgroup/cgroup.c
        kernel/sched/psi.c

1. Resolved trivial merge conflicts.

Bug: 233410456
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Change-Id: I7143fef51b874c2df8d792808b6a9b666eec2c7b
2022-07-25 07:05:33 +00:00
kondors1995
160da658d5 Revert "BACKPORT: psi: Fix uaf issue when psi trigger is destroyed while being polled"
This reverts commit 0fa6cc159b.
2022-07-25 07:05:02 +00:00
Tejun Heo
05f7658210 cgroup: Use separate src/dst nodes when preloading css_sets for migration
commit 07fd5b6cdf3cc30bfde8fe0f644771688be04447 upstream.

Each cset (css_set) is pinned by its tasks. When we're moving tasks around
across csets for a migration, we need to hold the source and destination
csets to ensure that they don't go away while we're moving tasks about. This
is done by linking cset->mg_preload_node on either the
mgctx->preloaded_src_csets or mgctx->preloaded_dst_csets list. Using the
same cset->mg_preload_node for both the src and dst lists was deemed okay as
a cset can't be both the source and destination at the same time.

Unfortunately, this overloading becomes problematic when multiple tasks are
involved in a migration and some of them are identity noop migrations while
others are actually moving across cgroups. For example, this can happen with
the following sequence on cgroup1:

 #1> mkdir -p /sys/fs/cgroup/misc/a/b
 #2> echo $$ > /sys/fs/cgroup/misc/a/cgroup.procs
 #3> RUN_A_COMMAND_WHICH_CREATES_MULTIPLE_THREADS &
 #4> PID=$!
 #5> echo $PID > /sys/fs/cgroup/misc/a/b/tasks
 #6> echo $PID > /sys/fs/cgroup/misc/a/cgroup.procs

the process including the group leader back into a. In this final migration,
non-leader threads would be doing identity migration while the group leader
is doing an actual one.

After #3, let's say the whole process was in cset A, and that after #4, the
leader moves to cset B. Then, during #6, the following happens:

 1. cgroup_migrate_add_src() is called on B for the leader.

 2. cgroup_migrate_add_src() is called on A for the other threads.

 3. cgroup_migrate_prepare_dst() is called. It scans the src list.

 4. It notices that B wants to migrate to A, so it tries to A to the dst
    list but realizes that its ->mg_preload_node is already busy.

 5. and then it notices A wants to migrate to A as it's an identity
    migration, it culls it by list_del_init()'ing its ->mg_preload_node and
    putting references accordingly.

 6. The rest of migration takes place with B on the src list but nothing on
    the dst list.

This means that A isn't held while migration is in progress. If all tasks
leave A before the migration finishes and the incoming task pins it, the
cset will be destroyed leading to use-after-free.

This is caused by overloading cset->mg_preload_node for both src and dst
preload lists. We wanted to exclude the cset from the src list but ended up
inadvertently excluding it from the dst list too.

This patch fixes the issue by separating out cset->mg_preload_node into
->mg_src_preload_node and ->mg_dst_preload_node, so that the src and dst
preloadings don't interfere with each other.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reported-by: shisiyuan <shisiyuan19870131@gmail.com>
Link: http://lkml.kernel.org/r/1654187688-27411-1-git-send-email-shisiyuan@xiaomi.com
Link: https://www.spinics.net/lists/cgroups/msg33313.html
Fixes: f817de9851 ("cgroup: prepare migration path for unified hierarchy")
Cc: stable@vger.kernel.org # v3.16+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-21 20:42:43 +02:00
John Galt
0b217f765e treewide: extend f09f56f893a4 2022-07-18 06:38:16 +00:00
Yu Zhao
54d9c5f519 FROMLIST: mm: multi-gen LRU: kill switch
Add /sys/kernel/mm/lru_gen/enabled as a kill switch. Components that
can be disabled include:
  0x0001: the multi-gen LRU core
  0x0002: walking page table, when arch_has_hw_pte_young() returns
          true
  0x0004: clearing the accessed bit in non-leaf PMD entries, when
          CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG=y
  [yYnN]: apply to all the components above
E.g.,
  echo y >/sys/kernel/mm/lru_gen/enabled
  cat /sys/kernel/mm/lru_gen/enabled
  0x0007
  echo 5 >/sys/kernel/mm/lru_gen/enabled
  cat /sys/kernel/mm/lru_gen/enabled
  0x0005

NB: the page table walks happen on the scale of seconds under heavy
memory pressure, in which case the mmap_lock contention is a lesser
concern, compared with the LRU lock contention and the I/O congestion.
So far the only well-known case of the mmap_lock contention happens on
Android, due to Scudo [1] which allocates several thousand VMAs for
merely a few hundred MBs. The SPF and the Maple Tree also have
provided their own assessments [2][3]. However, if walking page tables
does worsen the mmap_lock contention, the kill switch can be used to
disable it. In this case the multi-gen LRU will suffer a minor
performance degradation, as shown previously.

Clearing the accessed bit in non-leaf PMD entries can also be
disabled, since this behavior was not tested on x86 varieties other
than Intel and AMD.

[1] https://source.android.com/devices/tech/debug/scudo
[2] https://lore.kernel.org/lkml/20220128131006.67712-1-michel@lespinasse.org/
[3] https://lore.kernel.org/lkml/20220202024137.2516438-1-Liam.Howlett@oracle.com/

Link: https://lore.kernel.org/r/20220309021230.721028-11-yuzhao@google.com/
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Bug: 228114874
Change-Id: I71801d9470a2588cad8bfd14fbcfafc7b010aa03
2022-06-27 14:32:38 +00:00
kondors1995
a07d32d4a5 Merge branch 'android-4.14-stable' of https://android.googlesource.com/kernel/common into 12.1 2022-05-19 08:23:07 +00:00
Greg Kroah-Hartman
2cf46d4b1f Merge 4.14.280 into android-4.14-stable
Changes in 4.14.280
	batman-adv: Don't skb_split skbuffs with frag_list
	net: Fix features skip in for_each_netdev_feature()
	ipv4: drop dst in multicast routing path
	netlink: do not reset transport header in netlink_recvmsg()
	mac80211_hwsim: call ieee80211_tx_prepare_skb under RCU protection
	hwmon: (ltq-cputemp) restrict it to SOC_XWAY
	s390/ctcm: fix variable dereferenced before check
	s390/ctcm: fix potential memory leak
	s390/lcs: fix variable dereferenced before check
	net/smc: non blocking recvmsg() return -EAGAIN when no data and signal_pending
	net: sfc: ef10: fix memory leak in efx_ef10_mtd_probe()
	hwmon: (f71882fg) Fix negative temperature
	ASoC: max98090: Reject invalid values in custom control put()
	ASoC: max98090: Generate notifications on changes for custom control
	ASoC: ops: Validate input values in snd_soc_put_volsw_range()
	tcp: resalt the secret every 10 seconds
	usb: cdc-wdm: fix reading stuck on device close
	USB: serial: pl2303: add device id for HP LM930 Display
	USB: serial: qcserial: add support for Sierra Wireless EM7590
	USB: serial: option: add Fibocom L610 modem
	USB: serial: option: add Fibocom MA510 modem
	cgroup/cpuset: Remove cpus_allowed/mems_allowed setup in cpuset_init_smp()
	drm/vmwgfx: Initialize drm_mode_fb_cmd2
	ping: fix address binding wrt vrf
	tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()
	Linux 4.14.280

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I26d972bb02df91d847604b4abb78ac84c1371203
2022-05-18 09:36:05 +02:00
Waiman Long
7a34036ee5 cgroup/cpuset: Remove cpus_allowed/mems_allowed setup in cpuset_init_smp()
commit 2685027fca387b602ae565bff17895188b803988 upstream.

There are 3 places where the cpu and node masks of the top cpuset can
be initialized in the order they are executed:
 1) start_kernel -> cpuset_init()
 2) start_kernel -> cgroup_init() -> cpuset_bind()
 3) kernel_init_freeable() -> do_basic_setup() -> cpuset_init_smp()

The first cpuset_init() call just sets all the bits in the masks.
The second cpuset_bind() call sets cpus_allowed and mems_allowed to the
default v2 values. The third cpuset_init_smp() call sets them back to
v1 values.

For systems with cgroup v2 setup, cpuset_bind() is called once.  As a
result, cpu and memory node hot add may fail to update the cpu and node
masks of the top cpuset to include the newly added cpu or node in a
cgroup v2 environment.

For systems with cgroup v1 setup, cpuset_bind() is called again by
rebind_subsystem() when the v1 cpuset filesystem is mounted as shown
in the dmesg log below with an instrumented kernel.

  [    2.609781] cpuset_bind() called - v2 = 1
  [    3.079473] cpuset_init_smp() called
  [    7.103710] cpuset_bind() called - v2 = 0

smp_init() is called after the first two init functions.  So we don't
have a complete list of active cpus and memory nodes until later in
cpuset_init_smp() which is the right time to set up effective_cpus
and effective_mems.

To fix this cgroup v2 mask setup problem, the potentially incorrect
cpus_allowed & mems_allowed setting in cpuset_init_smp() are removed.
For cgroup v2 systems, the initial cpuset_bind() call will set the masks
correctly.  For cgroup v1 systems, the second call to cpuset_bind()
will do the right setup.

cc: stable@vger.kernel.org
Signed-off-by: Waiman Long <longman@redhat.com>
Tested-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18 09:18:08 +02:00
kondors1995
0cca5fb93e Revert "Merge branch 'dev/mglru' into dev/12-2"
This reverts commit e3d1ce4d09, reversing
changes made to d3cf1f4d72.
2022-05-17 08:16:01 +00:00
Yu Zhao
db2f982ebb FROMLIST: mm: multi-gen LRU: kill switch
Add /sys/kernel/mm/lru_gen/enabled as a kill switch. Components that
can be disabled include:
  0x0001: the multi-gen LRU core
  0x0002: walking page table, when arch_has_hw_pte_young() returns
          true
  0x0004: clearing the accessed bit in non-leaf PMD entries, when
          CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG=y
  [yYnN]: apply to all the components above
E.g.,
  echo y >/sys/kernel/mm/lru_gen/enabled
  cat /sys/kernel/mm/lru_gen/enabled
  0x0007
  echo 5 >/sys/kernel/mm/lru_gen/enabled
  cat /sys/kernel/mm/lru_gen/enabled
  0x0005

NB: the page table walks happen on the scale of seconds under heavy
memory pressure, in which case the mmap_lock contention is a lesser
concern, compared with the LRU lock contention and the I/O congestion.
So far the only well-known case of the mmap_lock contention happens on
Android, due to Scudo [1] which allocates several thousand VMAs for
merely a few hundred MBs. The SPF and the Maple Tree also have
provided their own assessments [2][3]. However, if walking page tables
does worsen the mmap_lock contention, the kill switch can be used to
disable it. In this case the multi-gen LRU will suffer a minor
performance degradation, as shown previously.

Clearing the accessed bit in non-leaf PMD entries can also be
disabled, since this behavior was not tested on x86 varieties other
than Intel and AMD.

[1] https://source.android.com/devices/tech/debug/scudo
[2] https://lore.kernel.org/lkml/20220128131006.67712-1-michel@lespinasse.org/
[3] https://lore.kernel.org/lkml/20220202024137.2516438-1-Liam.Howlett@oracle.com/

Link: https://lore.kernel.org/r/20220309021230.721028-11-yuzhao@google.com/
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Bug: 228114874
Change-Id: I71801d9470a2588cad8bfd14fbcfafc7b010aa03
2022-05-03 11:10:21 +00:00
Suren Baghdasaryan
a576eebbbd BACKPORT: psi: Fix uaf issue when psi trigger is destroyed while being polled
With write operation on psi files replacing old trigger with a new one,
the lifetime of its waitqueue is totally arbitrary. Overwriting an
existing trigger causes its waitqueue to be freed and pending poll()
will stumble on trigger->event_wait which was destroyed.
Fix this by disallowing to redefine an existing psi trigger. If a write
operation is used on a file descriptor with an already existing psi
trigger, the operation will fail with EBUSY error.
Also bypass a check for psi_disabled in the psi_trigger_destroy as the
flag can be flipped after the trigger is created, leading to a memory
leak.

Fixes: 0e94682 ("psi: introduce psi monitor")
Reported-by: syzbot+cdb5dd11c97cc532efad@syzkaller.appspotmail.com
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Analyzed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220111232309.1786347-1-surenb@google.com
Signed-off-by: Andrzej Perczak <linux@andrzejperczak.com>
2022-05-03 11:10:19 +00:00
Sebastian Andrzej Siewior
bc314749e9 kernel: sched: Provide a pointer to the valid CPU mask
In commit 4b53a3412d ("sched/core: Remove the tsk_nr_cpus_allowed()
wrapper") the tsk_nr_cpus_allowed() wrapper was removed. There was not
much difference in !RT but in RT we used this to implement
migrate_disable(). Within a migrate_disable() section the CPU mask is
restricted to single CPU while the "normal" CPU mask remains untouched.

As an alternative implementation Ingo suggested to use
	struct task_struct {
		const cpumask_t		*cpus_ptr;
		cpumask_t		cpus_mask;
        };
with
	t->cpus_allowed_ptr = &t->cpus_allowed;

In -RT we then can switch the cpus_ptr to
	t->cpus_allowed_ptr = &cpumask_of(task_cpu(p));

in a migration disabled region. The rules are simple:
- Code that 'uses' ->cpus_allowed would use the pointer.
- Code that 'modifies' ->cpus_allowed would use the direct mask.

While converting the existing users I tried to stick with the rules
above however… well mostly CPUFREQ tries to temporary switch the CPU
mask to do something on a certain CPU and then switches the mask back it
its original value. So in theory `cpus_ptr' could or should be used.
However if this is invoked in a migration disabled region (which is not
the case because it would require something like preempt_disable() and
set_cpus_allowed_ptr() might sleep so it can't be) then the "restore"
part would restore the wrong mask. So it only looks strange and I go for
the pointer…

Some drivers copy the cpumask without cpumask_copy() and others use
cpumask_copy but without alloc_cpumask_var(). I did not fix those as
part of this, could do this as a follow up…

So is this the way we want it?
Is the usage of `cpus_ptr' vs `cpus_mask' for the set + restore part
(see cpufreq users) what we want? At some point it looks like they
should use a different interface for their doing. I am not sure why
switching to certain CPU is important but maybe it could be done via a
workqueue from the CPUFREQ core (so we have a comment desribing why are
doing this and a get_online_cpus() to ensure that the CPU does not go
offline too early).

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[Sultan Alsawaf: adapt to floral]
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
2022-04-28 07:15:14 +00:00
kondors1995
b20e114357 Merge branch 'android-4.14-stable' of https://android.googlesource.com/kernel/common into 12.1 2022-04-22 14:26:32 +00:00
Greg Kroah-Hartman
b296bf0cb0 Merge 4.14.276 into android-4.14-stable
Changes in 4.14.276
	USB: serial: pl2303: add IBM device IDs
	USB: serial: simple: add Nokia phone driver
	netdevice: add the case if dev is NULL
	virtio_console: break out of buf poll on remove
	ethernet: sun: Free the coherent when failing in probing
	spi: Fix invalid sgs value
	spi: Fix erroneous sgs value with min_t()
	af_key: add __GFP_ZERO flag for compose_sadb_supported in function pfkey_register
	fuse: fix pipe buffer lifetime for direct_io
	tpm: fix reference counting for struct tpm_chip
	block: Add a helper to validate the block size
	virtio-blk: Use blk_validate_block_size() to validate block size
	USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c
	coresight: Fix TRCCONFIGR.QE sysfs interface
	iio: inkern: apply consumer scale on IIO_VAL_INT cases
	iio: inkern: apply consumer scale when no channel scale is available
	iio: inkern: make a best effort on offset calculation
	clk: uniphier: Fix fixed-rate initialization
	ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
	Documentation: add link to stable release candidate tree
	Documentation: update stable tree link
	SUNRPC: avoid race between mod_timer() and del_timer_sync()
	NFSD: prevent underflow in nfssvc_decode_writeargs()
	pinctrl: samsung: drop pin banks references on error paths
	can: ems_usb: ems_usb_start_xmit(): fix double dev_kfree_skb() in error path
	jffs2: fix use-after-free in jffs2_clear_xattr_subsystem
	jffs2: fix memory leak in jffs2_do_mount_fs
	jffs2: fix memory leak in jffs2_scan_medium
	mm/pages_alloc.c: don't create ZONE_MOVABLE beyond the end of a node
	mempolicy: mbind_range() set_policy() after vma_merge()
	scsi: libsas: Fix sas_ata_qc_issue() handling of NCQ NON DATA commands
	qed: display VF trust config
	qed: validate and restrict untrusted VFs vlan promisc mode
	Revert "Input: clear BTN_RIGHT/MIDDLE on buttonpads"
	ALSA: cs4236: fix an incorrect NULL check on list iterator
	drbd: fix potential silent data corruption
	ACPI: properties: Consistently return -ENOENT if there are no more references
	drivers: hamradio: 6pack: fix UAF bug caused by mod_timer()
	video: fbdev: sm712fb: Fix crash in smtcfb_read()
	video: fbdev: atari: Atari 2 bpp (STe) palette bugfix
	ARM: dts: at91: sama5d2: Fix PMERRLOC resource size
	ARM: dts: exynos: fix UART3 pins configuration in Exynos5250
	ARM: dts: exynos: add missing HDMI supplies on SMDK5250
	ARM: dts: exynos: add missing HDMI supplies on SMDK5420
	carl9170: fix missing bit-wise or operator for tx_params
	thermal: int340x: Increase bitmap size
	lib/raid6/test: fix multiple definition linking error
	DEC: Limit PMAX memory probing to R3k systems
	media: davinci: vpif: fix unbalanced runtime PM get
	brcmfmac: firmware: Allocate space for default boardrev in nvram
	brcmfmac: pcie: Replace brcmf_pcie_copy_mem_todev with memcpy_toio
	PCI: pciehp: Clear cmd_busy bit in polling mode
	crypto: authenc - Fix sleep in atomic context in decrypt_tail
	crypto: mxs-dcp - Fix scatterlist processing
	spi: tegra114: Add missing IRQ check in tegra_spi_probe
	selftests/x86: Add validity check and allow field splitting
	spi: pxa2xx-pci: Balance reference count for PCI DMA device
	hwmon: (pmbus) Add mutex to regulator ops
	hwmon: (sch56xx-common) Replace WDOG_ACTIVE with WDOG_HW_RUNNING
	PM: hibernate: fix __setup handler error handling
	PM: suspend: fix return value of __setup handler
	hwrng: atmel - disable trng on failure path
	crypto: vmx - add missing dependencies
	ACPI: APEI: fix return value of __setup handlers
	crypto: ccp - ccp_dmaengine_unregister release dma channels
	hwmon: (pmbus) Add Vin unit off handling
	clocksource: acpi_pm: fix return value of __setup handler
	sched/debug: Remove mpol_get/put and task_lock/unlock from sched_show_numa
	perf/core: Fix address filter parser for multiple filters
	perf/x86/intel/pt: Fix address filter config for 32-bit kernel
	media: coda: Fix missing put_device() call in coda_get_vdoa_data
	video: fbdev: smscufx: Fix null-ptr-deref in ufx_usb_probe()
	video: fbdev: fbcvt.c: fix printing in fb_cvt_print_name()
	ARM: dts: qcom: ipq4019: fix sleep clock
	soc: ti: wkup_m3_ipc: Fix IRQ check in wkup_m3_ipc_probe
	media: usb: go7007: s2250-board: fix leak in probe()
	ASoC: ti: davinci-i2s: Add check for clk_enable()
	ALSA: spi: Add check for clk_enable()
	arm64: dts: ns2: Fix spi-cpol and spi-cpha property
	arm64: dts: broadcom: Fix sata nodename
	printk: fix return value of printk.devkmsg __setup handler
	ASoC: mxs-saif: Handle errors for clk_enable
	ASoC: atmel_ssc_dai: Handle errors for clk_enable
	memory: emif: Add check for setup_interrupts
	memory: emif: check the pointer temp in get_device_details()
	ALSA: firewire-lib: fix uninitialized flag for AV/C deferred transaction
	media: stk1160: If start stream fails, return buffers with VB2_BUF_STATE_QUEUED
	ASoC: atmel: Add missing of_node_put() in at91sam9g20ek_audio_probe
	ASoC: wm8350: Handle error for wm8350_register_irq
	ASoC: fsi: Add check for clk_enable
	video: fbdev: omapfb: Add missing of_node_put() in dvic_probe_of
	ASoC: dmaengine: do not use a NULL prepare_slave_config() callback
	ASoC: mxs: Fix error handling in mxs_sgtl5000_probe
	ASoC: imx-es8328: Fix error return code in imx_es8328_probe()
	ASoC: msm8916-wcd-digital: Fix missing clk_disable_unprepare() in msm8916_wcd_digital_probe
	mtd: onenand: Check for error irq
	drm/edid: Don't clear formats if using deep color
	ath9k_htc: fix uninit value bugs
	power: reset: gemini-poweroff: Fix IRQ check in gemini_poweroff_probe
	ray_cs: Check ioremap return value
	power: supply: ab8500: Fix memory leak in ab8500_fg_sysfs_init
	HID: i2c-hid: fix GET/SET_REPORT for unnumbered reports
	iwlwifi: Fix -EIO error code that is never returned
	dm crypt: fix get_key_size compiler warning if !CONFIG_KEYS
	scsi: pm8001: Fix command initialization in pm80XX_send_read_log()
	scsi: pm8001: Fix command initialization in pm8001_chip_ssp_tm_req()
	scsi: pm8001: Fix payload initialization in pm80xx_set_thermal_config()
	scsi: pm8001: Fix abort all task initialization
	TOMOYO: fix __setup handlers return values
	ext2: correct max file size computing
	drm/tegra: Fix reference leak in tegra_dsi_ganged_probe
	power: supply: bq24190_charger: Fix bq24190_vbus_is_enabled() wrong false return
	KVM: x86: Fix emulation in writing cr8
	KVM: x86/emulator: Defer not-present segment check in __load_segment_descriptor()
	i2c: xiic: Make bus names unique
	power: supply: wm8350-power: Handle error for wm8350_register_irq
	power: supply: wm8350-power: Add missing free in free_charger_irq
	PCI: Reduce warnings on possible RW1C corruption
	powerpc/sysdev: fix incorrect use to determine if list is empty
	mfd: mc13xxx: Add check for mc13xxx_irq_request
	vxcan: enable local echo for sent CAN frames
	MIPS: RB532: fix return value of __setup handler
	mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init
	USB: storage: ums-realtek: fix error code in rts51x_read_mem()
	af_netlink: Fix shift out of bounds in group mask calculation
	i2c: mux: demux-pinctrl: do not deactivate a master that is not active
	tcp: ensure PMTU updates are processed during fastopen
	mfd: asic3: Add missing iounmap() on error asic3_mfd_probe
	mxser: fix xmit_buf leak in activate when LSR == 0xff
	pwm: lpc18xx-sct: Initialize driver data and hardware before pwmchip_add()
	staging:iio:adc:ad7280a: Fix handing of device address bit reversing.
	serial: 8250_mid: Balance reference count for PCI DMA device
	serial: 8250: Fix race condition in RTS-after-send handling
	iio: adc: Add check for devm_request_threaded_irq
	clk: qcom: clk-rcg2: Update the frac table for pixel clock
	remoteproc: qcom_wcnss: Add missing of_node_put() in wcnss_alloc_memory_region
	clk: loongson1: Terminate clk_div_table with sentinel element
	clk: clps711x: Terminate clk_div_table with sentinel element
	clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver
	NFS: remove unneeded check in decode_devicenotify_args()
	pinctrl: mediatek: Fix missing of_node_put() in mtk_pctrl_init
	pinctrl: nomadik: Add missing of_node_put() in nmk_pinctrl_probe
	pinctrl/rockchip: Add missing of_node_put() in rockchip_pinctrl_probe
	tty: hvc: fix return value of __setup handler
	kgdboc: fix return value of __setup handler
	kgdbts: fix return value of __setup handler
	jfs: fix divide error in dbNextAG
	netfilter: nf_conntrack_tcp: preserve liberal flag in tcp options
	xen: fix is_xen_pmu()
	net: phy: broadcom: Fix brcm_fet_config_init()
	qlcnic: dcb: default to returning -EOPNOTSUPP
	net/x25: Fix null-ptr-deref caused by x25_disconnect
	NFSv4/pNFS: Fix another issue with a list iterator pointing to the head
	lib/test: use after free in register_test_dev_kmod()
	selinux: use correct type for context length
	loop: use sysfs_emit() in the sysfs xxx show()
	Fix incorrect type in assignment of ipv6 port for audit
	irqchip/nvic: Release nvic_base upon failure
	ACPICA: Avoid walking the ACPI Namespace if it is not there
	ACPI/APEI: Limit printable size of BERT table data
	PM: core: keep irq flags in device_pm_check_callbacks()
	spi: tegra20: Use of_device_get_match_data()
	ext4: don't BUG if someone dirty pages without asking ext4 first
	ntfs: add sanity check on allocation size
	video: fbdev: nvidiafb: Use strscpy() to prevent buffer overflow
	video: fbdev: w100fb: Reset global state
	video: fbdev: cirrusfb: check pixclock to avoid divide by zero
	video: fbdev: omapfb: acx565akm: replace snprintf with sysfs_emit
	ARM: dts: qcom: fix gic_irq_domain_translate warnings for msm8960
	ARM: dts: bcm2837: Add the missing L1/L2 cache information
	video: fbdev: omapfb: panel-dsi-cm: Use sysfs_emit() instead of snprintf()
	video: fbdev: omapfb: panel-tpo-td043mtea1: Use sysfs_emit() instead of snprintf()
	ASoC: soc-core: skip zero num_dai component in searching dai name
	media: cx88-mpeg: clear interrupt status register before streaming video
	ARM: tegra: tamonten: Fix I2C3 pad setting
	ARM: mmp: Fix failure to remove sram device
	video: fbdev: sm712fb: Fix crash in smtcfb_write()
	media: hdpvr: initialize dev->worker at hdpvr_register_videodev
	mmc: host: Return an error when ->enable_sdio_irq() ops is missing
	powerpc/lib/sstep: Fix 'sthcx' instruction
	powerpc/lib/sstep: Fix build errors with newer binutils
	scsi: qla2xxx: Fix warning for missing error code
	scsi: qla2xxx: Suppress a kernel complaint in qla_create_qpair()
	KVM: Prevent module exit until all VMs are freed
	ubifs: rename_whiteout: Fix double free for whiteout_ui->data
	ubifs: Add missing iput if do_tmpfile() failed in rename whiteout
	ubifs: setflags: Make dirtied_ino_d 8 bytes aligned
	ubifs: rename_whiteout: correct old_dir size computing
	can: mcba_usb: mcba_usb_start_xmit(): fix double dev_kfree_skb in error path
	can: mcba_usb: properly check endpoint type
	gfs2: Make sure FITRIM minlen is rounded up to fs block size
	pinctrl: pinconf-generic: Print arguments for bias-pull-*
	ubi: Fix race condition between ctrl_cdev_ioctl and ubi_cdev_ioctl
	ACPI: CPPC: Avoid out of bounds access when parsing _CPC data
	mm/mmap: return 1 from stack_guard_gap __setup() handler
	mm/memcontrol: return 1 from cgroup.memory __setup() handler
	ubi: fastmap: Return error code if memory allocation fails in add_aeb()
	ASoC: topology: Allow TLV control to be either read or write
	ARM: dts: spear1340: Update serial node properties
	ARM: dts: spear13xx: Update SPI dma properties
	openvswitch: Fixed nd target mask field in the flow dump.
	KVM: x86: Forbid VMM to set SYNIC/STIMER MSRs when SynIC wasn't activated
	ubifs: Rectify space amount budget for mkdir/tmpfile operations
	rtc: wm8350: Handle error for wm8350_register_irq
	ARM: 9187/1: JIVE: fix return value of __setup handler
	KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs
	ath5k: fix OOB in ath5k_eeprom_read_pcal_info_5111
	ptp: replace snprintf with sysfs_emit
	powerpc: dts: t104xrdb: fix phy type for FMAN 4/5
	scsi: mvsas: Replace snprintf() with sysfs_emit()
	scsi: bfa: Replace snprintf() with sysfs_emit()
	power: supply: axp20x_battery: properly report current when discharging
	powerpc: Set crashkernel offset to mid of RMA region
	PCI: aardvark: Fix support for MSI interrupts
	iommu/arm-smmu-v3: fix event handling soft lockup
	dm ioctl: prevent potential spectre v1 gadget
	scsi: pm8001: Fix pm8001_mpi_task_abort_resp()
	scsi: aha152x: Fix aha152x_setup() __setup handler return value
	net/smc: correct settings of RMB window update limit
	macvtap: advertise link netns via netlink
	bnxt_en: Eliminate unintended link toggle during FW reset
	MIPS: fix fortify panic when copying asm exception handlers
	scsi: libfc: Fix use after free in fc_exch_abts_resp()
	usb: dwc3: omap: fix "unbalanced disables for smps10_out1" on omap5evm
	xtensa: fix DTC warning unit_address_format
	Bluetooth: Fix use after free in hci_send_acl
	init/main.c: return 1 from handled __setup() functions
	w1: w1_therm: fixes w1_seq for ds28ea00 sensors
	SUNRPC/call_alloc: async tasks mustn't block waiting for memory
	NFS: swap IO handling is slightly different for O_DIRECT IO
	NFS: swap-out must always use STABLE writes.
	serial: samsung_tty: do not unlock port->lock for uart_write_wakeup()
	virtio_console: eliminate anonymous module_init & module_exit
	jfs: prevent NULL deref in diFree
	parisc: Fix CPU affinity for Lasi, WAX and Dino chips
	ipv6: add missing tx timestamping on IPPROTO_RAW
	net: add missing SOF_TIMESTAMPING_OPT_ID support
	mm: fix race between MADV_FREE reclaim and blkdev direct IO read
	drm/amdgpu: fix off by one in amdgpu_gfx_kiq_acquire()
	scsi: zorro7xx: Fix a resource leak in zorro7xx_remove_one()
	net: stmmac: Fix unset max_speed difference between DT and non-DT platforms
	drm/imx: Fix memory leak in imx_pd_connector_get_modes
	drbd: Fix five use after free bugs in get_initial_state
	Revert "mmc: sdhci-xenon: fix annoying 1.8V regulator warning"
	mmmremap.c: avoid pointless invalidate_range_start/end on mremap(old_size=0)
	mm/mempolicy: fix mpol_new leak in shared_policy_replace
	x86/pm: Save the MSR validity status at context setup
	x86/speculation: Restore speculation related MSRs during S3 resume
	btrfs: fix qgroup reserve overflow the qgroup limit
	arm64: patch_text: Fixup last cpu should be master
	perf: qcom_l2_pmu: fix an incorrect NULL check on list iterator
	tools build: Use $(shell ) instead of `` to get embedded libperl's ccopts
	dmaengine: Revert "dmaengine: shdma: Fix runtime PM imbalance on error"
	mm: don't skip swap entry even if zap_details specified
	arm64: module: remove (NOLOAD) from linker script
	mm/sparsemem: fix 'mem_section' will never be NULL gcc 12 warning
	cgroup: Use open-time credentials for process migraton perm checks
	cgroup: Allocate cgroup_file_ctx for kernfs_open_file->priv
	cgroup: Use open-time cgroup namespace for process migration perm checks
	xfrm: policy: match with both mark and mask on user interfaces
	memory: atmel-ebi: Fix missing of_node_put in atmel_ebi_probe
	veth: Ensure eth header is in skb's linear part
	gpiolib: acpi: use correct format characters
	mlxsw: i2c: Fix initialization error flow
	net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link
	nfc: nci: add flush_workqueue to prevent uaf
	cifs: potential buffer overflow in handling symlinks
	drm/amd: Add USBC connector ID
	drm/amdkfd: Check for potential null return of kmalloc_array()
	Drivers: hv: vmbus: Prevent load re-ordering when reading ring buffer
	scsi: target: tcmu: Fix possible page UAF
	scsi: ibmvscsis: Increase INITIAL_SRP_LIMIT to 1024
	net: micrel: fix KS8851_MLL Kconfig
	ata: libata-core: Disable READ LOG DMA EXT for Samsung 840 EVOs
	gpu: ipu-v3: Fix dev_dbg frequency output
	scsi: mvsas: Add PCI ID of RocketRaid 2640
	drivers: net: slip: fix NPD bug in sl_tx_timeout()
	mm, page_alloc: fix build_zonerefs_node()
	mm: kmemleak: take a full lowmem check in kmemleak_*_phys()
	gcc-plugins: latent_entropy: use /dev/urandom
	ALSA: pcm: Test for "silence" field in struct "pcm_format_data"
	ARM: davinci: da850-evm: Avoid NULL pointer dereference
	smp: Fix offline cpu check in flush_smp_call_function_queue()
	i2c: pasemi: Wait for write xfers to finish
	Linux 4.14.276

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I45d8292ce654c0236758030a89b4618cf3a3d87b
2022-04-21 14:08:46 +02:00
Tejun Heo
2337c8257c cgroup: Use open-time cgroup namespace for process migration perm checks
commit e57457641613fef0d147ede8bd6a3047df588b95 upstream.

cgroup process migration permission checks are performed at write time as
whether a given operation is allowed or not is dependent on the content of
the write - the PID. This currently uses current's cgroup namespace which is
a potential security weakness as it may allow scenarios where a less
privileged process tricks a more privileged one into writing into a fd that
it created.

This patch makes cgroup remember the cgroup namespace at the time of open
and uses it for migration permission checks instad of current's. Note that
this only applies to cgroup2 as cgroup1 doesn't have namespace support.

This also fixes a use-after-free bug on cgroupns reported in

 https://lore.kernel.org/r/00000000000048c15c05d0083397@google.com

Note that backporting this fix also requires the preceding patch.

Reported-by: "Eric W. Biederman" <ebiederm@xmission.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Reported-by: syzbot+50f5cf33a284ce738b62@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/00000000000048c15c05d0083397@google.com
Fixes: 5136f6365c ("cgroup: implement "nsdelegate" mount option")
Signed-off-by: Tejun Heo <tj@kernel.org>
[mkoutny: v5.10: duplicate ns check in procs/threads write handler, adjust context]
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[OP: backport to v4.14: drop changes to cgroup_attach_permissions() and
cgroup_css_set_fork(), adjust cgroup_procs_write_permission() calls]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20 09:08:30 +02:00
Tejun Heo
f1ce7855af cgroup: Allocate cgroup_file_ctx for kernfs_open_file->priv
commit 0d2b5955b36250a9428c832664f2079cbf723bec upstream.

of->priv is currently used by each interface file implementation to store
private information. This patch collects the current two private data usages
into struct cgroup_file_ctx which is allocated and freed by the common path.
This allows generic private data which applies to multiple files, which will
be used to in the following patch.

Note that cgroup_procs iterator is now embedded as procs.iter in the new
cgroup_file_ctx so that it doesn't need to be allocated and freed
separately.

v2: union dropped from cgroup_file_ctx and the procs iterator is embedded in
    cgroup_file_ctx as suggested by Linus.

v3: Michal pointed out that cgroup1's procs pidlist uses of->priv too.
    Converted. Didn't change to embedded allocation as cgroup1 pidlists get
    stored for caching.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
[mkoutny: v5.10: modify cgroup.pressure handlers, adjust context]
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[OP: backport to v4.14: drop changes to cgroup_pressure_*() functions]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20 09:08:30 +02:00
Tejun Heo
a70bcf9ed0 cgroup: Use open-time credentials for process migraton perm checks
commit 1756d7994ad85c2479af6ae5a9750b92324685af upstream.

cgroup process migration permission checks are performed at write time as
whether a given operation is allowed or not is dependent on the content of
the write - the PID. This currently uses current's credentials which is a
potential security weakness as it may allow scenarios where a less
privileged process tricks a more privileged one into writing into a fd that
it created.

This patch makes both cgroup2 and cgroup1 process migration interfaces to
use the credentials saved at the time of open (file->f_cred) instead of
current's.

Reported-by: "Eric W. Biederman" <ebiederm@xmission.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Fixes: 187fe84067 ("cgroup: require write perm on common ancestor when moving processes on the default hierarchy")
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
[OP: backport to v4.14: apply original __cgroup_procs_write() changes to
cgroup_threads_write() and cgroup_procs_write()]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20 09:08:30 +02:00
kondors1995
f62314b6f3 Merge branch 'android-4.14-stable' of https://android.googlesource.com/kernel/common into dev/12.0 2022-03-11 09:35:52 +00:00
Greg Kroah-Hartman
0eec6f6001 Merge 4.14.269 into android-4.14-stable
Changes in 4.14.269
	cgroup/cpuset: Fix a race between cpuset_attach() and cpu hotplug
	vhost/vsock: don't check owner in vhost_vsock_stop() while releasing
	parisc/unaligned: Fix fldd and fstd unaligned handlers on 32-bit kernel
	parisc/unaligned: Fix ldw() and stw() unalignment handlers
	sr9700: sanity check for packet length
	USB: zaurus: support another broken Zaurus
	serial: 8250: of: Fix mapped region size when using reg-offset property
	ping: remove pr_err from ping_lookup
	net: __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor friends
	gso: do not skip outer ip header in case of ipip and net_failover
	openvswitch: Fix setting ipv6 fields causing hw csum failure
	drm/edid: Always set RGB444
	net/mlx5e: Fix wrong return value on ioctl EEPROM query failure
	configfs: fix a race in configfs_{,un}register_subsystem()
	RDMA/ib_srp: Fix a deadlock
	iio: adc: men_z188_adc: Fix a resource leak in an error handling path
	ata: pata_hpt37x: disable primary channel on HPT371
	Revert "USB: serial: ch341: add new Product ID for CH341A"
	usb: gadget: rndis: add spinlock for rndis response list
	USB: gadget: validate endpoint index for xilinx udc
	tracefs: Set the group ownership in apply_options() not parse_options()
	USB: serial: option: add support for DW5829e
	USB: serial: option: add Telit LE910R1 compositions
	usb: dwc3: gadget: Let the interrupt handler disable bottom halves.
	xhci: re-initialize the HC during resume if HCE was set
	xhci: Prevent futile URB re-submissions due to incorrect return value.
	tty: n_gsm: fix encoding of control signal octet bit DV
	tty: n_gsm: fix proper link termination after failed open
	Revert "drm/nouveau/pmu/gm200-: avoid touching PMU outside of DEVINIT/PREOS/ACR"
	memblock: use kfree() to release kmalloced memblock regions
	fget: clarify and improve __fget_files() implementation
	Linux 4.14.269

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I0c7a1a638cac0693161ad06dd369075a6dd42402
2022-03-02 15:28:01 +01:00
Zhang Qiao
40b4ac82da cgroup/cpuset: Fix a race between cpuset_attach() and cpu hotplug
commit 05c7b7a92cc87ff8d7fde189d0fade250697573c upstream.

As previously discussed(https://lkml.org/lkml/2022/1/20/51),
cpuset_attach() is affected with similar cpu hotplug race,
as follow scenario:

     cpuset_attach()				cpu hotplug
    ---------------------------            ----------------------
    down_write(cpuset_rwsem)
    guarantee_online_cpus() // (load cpus_attach)
					sched_cpu_deactivate
					  set_cpu_active()
					  // will change cpu_active_mask
    set_cpus_allowed_ptr(cpus_attach)
      __set_cpus_allowed_ptr_locked()
       // (if the intersection of cpus_attach and
         cpu_active_mask is empty, will return -EINVAL)
    up_write(cpuset_rwsem)

To avoid races such as described above, protect cpuset_attach() call
with cpu_hotplug_lock.

Fixes: be367d0992 ("cgroups: let ss->can_attach and ss->attach do whole threadgroups at a time")
Cc: stable@vger.kernel.org # v2.6.32+
Reported-by: Zhao Gongyi <zhaogongyi@huawei.com>
Signed-off-by: Zhang Qiao <zhangqiao22@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-02 11:33:52 +01:00
kondors1995
1b87788ded Merge branch 'android-4.14-stable' of https://android.googlesource.com/kernel/common into 12.0 2022-02-16 08:04:56 +00:00
Greg Kroah-Hartman
a6629435cc Merge 4.14.266 into android-4.14-stable
Changes in 4.14.266
	cgroup-v1: Require capabilities to set release_agent
	moxart: fix potential use-after-free on remove path
	x86/mm, mm/hwpoison: Fix the unmap kernel 1:1 pages check condition
	tipc: improve size validations for received domain records
	Linux 4.14.266

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Id5f654da1b01e5d79f58678f06caaab832538bf2
2022-02-11 08:54:41 +01:00
Eric W. Biederman
b391bb3554 cgroup-v1: Require capabilities to set release_agent
commit 24f6008564183aa120d07c03d9289519c2fe02af upstream.

The cgroup release_agent is called with call_usermodehelper.  The function
call_usermodehelper starts the release_agent with a full set fo capabilities.
Therefore require capabilities when setting the release_agaent.

Reported-by: Tabitha Sable <tabitha.c.sable@gmail.com>
Tested-by: Tabitha Sable <tabitha.c.sable@gmail.com>
Fixes: 81a6a5cdd2 ("Task Control Groups: automatic userspace notification of idle cgroups")
Cc: stable@vger.kernel.org # v2.6.24+
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
[mkoutny: Adjust for pre-fs_context, duplicate mount/remount check, drop log messages.]
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-11 08:43:35 +01:00
Andrzej Perczak
1e055e97a7 rcu: Squash backport from v5.4
This is a shameless squash of Jebaitedeneko work:
https://github.com/Jebaitedneko/android_kernel_xiaomi_vayu/tree/rcu

Signed-off-by: Andrzej Perczak <linux@andrzejperczak.com>
2022-01-22 14:28:43 +00:00
kondors1995
55a12718d5 Merge tag 'LA.UM.9.1.r1-11500-SMxxx0.0' of https://source.codeaurora.org/quic/la/kernel/msm-4.14 into dev/12.0
"LA.UM.9.1.r1-11500-SMxxx0.0"
2022-01-17 11:11:38 +00:00
Greg Kroah-Hartman
3b301245dd Merge 4.14.256 into android-4.14-stable
Changes in 4.14.256
	xhci: Fix USB 3.1 enumeration issues by increasing roothub power-on-good delay
	binder: use euid from cred instead of using task
	binder: use cred instead of task for selinux checks
	Input: elantench - fix misreporting trackpoint coordinates
	Input: i8042 - Add quirk for Fujitsu Lifebook T725
	libata: fix read log timeout value
	ocfs2: fix data corruption on truncate
	mmc: dw_mmc: Dont wait for DRTO on Write RSP error
	parisc: Fix ptrace check on syscall return
	tpm: Check for integer overflow in tpm2_map_response_body()
	media: ite-cir: IR receiver stop working after receive overflow
	ALSA: ua101: fix division by zero at probe
	ALSA: 6fire: fix control and bulk message timeouts
	ALSA: line6: fix control and interrupt message timeouts
	ALSA: synth: missing check for possible NULL after the call to kstrdup
	ALSA: timer: Fix use-after-free problem
	ALSA: timer: Unconditionally unlink slave instances, too
	x86/irq: Ensure PI wakeup handler is unregistered before module unload
	cavium: Return negative value when pci_alloc_irq_vectors() fails
	scsi: qla2xxx: Fix unmap of already freed sgl
	cavium: Fix return values of the probe function
	sfc: Don't use netif_info before net_device setup
	hyperv/vmbus: include linux/bitops.h
	mmc: winbond: don't build on M68K
	bpf: Prevent increasing bpf_jit_limit above max
	xen/netfront: stop tx queues during live migration
	spi: spl022: fix Microwire full duplex mode
	watchdog: Fix OMAP watchdog early handling
	vmxnet3: do not stop tx queues after netif_device_detach()
	btrfs: fix lost error handling when replaying directory deletes
	hwmon: (pmbus/lm25066) Add offset coefficients
	regulator: s5m8767: do not use reset value as DVS voltage if GPIO DVS is disabled
	regulator: dt-bindings: samsung,s5m8767: correct s5m8767,pmic-buck-default-dvs-idx property
	EDAC/sb_edac: Fix top-of-high-memory value for Broadwell/Haswell
	mwifiex: fix division by zero in fw download path
	ath6kl: fix division by zero in send path
	ath6kl: fix control-message timeout
	ath10k: fix control-message timeout
	ath10k: fix division by zero in send path
	PCI: Mark Atheros QCA6174 to avoid bus reset
	rtl8187: fix control-message timeouts
	evm: mark evm_fixmode as __ro_after_init
	wcn36xx: Fix HT40 capability for 2Ghz band
	mwifiex: Read a PCI register after writing the TX ring write pointer
	libata: fix checking of DMA state
	wcn36xx: handle connection loss indication
	RDMA/qedr: Fix NULL deref for query_qp on the GSI QP
	signal: Remove the bogus sigkill_pending in ptrace_stop
	signal/mips: Update (_save|_restore)_fp_context to fail with -EFAULT
	power: supply: max17042_battery: Prevent int underflow in set_soc_threshold
	power: supply: max17042_battery: use VFSOC for capacity when no rsns
	powerpc/85xx: Fix oops when mpc85xx_smp_guts_ids node cannot be found
	serial: core: Fix initializing and restoring termios speed
	ALSA: mixer: oss: Fix racy access to slots
	ALSA: mixer: fix deadlock in snd_mixer_oss_set_volume
	xen/balloon: add late_initcall_sync() for initial ballooning done
	PCI: aardvark: Do not clear status bits of masked interrupts
	PCI: aardvark: Do not unmask unused interrupts
	PCI: aardvark: Fix return value of MSI domain .alloc() method
	PCI: aardvark: Read all 16-bits from PCIE_MSI_PAYLOAD_REG
	quota: check block number when reading the block in quota file
	quota: correct error number in free_dqentry()
	pinctrl: core: fix possible memory leak in pinctrl_enable()
	iio: dac: ad5446: Fix ad5622_write() return value
	USB: serial: keyspan: fix memleak on probe errors
	USB: iowarrior: fix control-message timeouts
	Bluetooth: sco: Fix lock_sock() blockage by memcpy_from_msg()
	Bluetooth: fix use-after-free error in lock_sock_nested()
	platform/x86: wmi: do not fail if disabling fails
	MIPS: lantiq: dma: add small delay after reset
	MIPS: lantiq: dma: reset correct number of channel
	locking/lockdep: Avoid RCU-induced noinstr fail
	smackfs: Fix use-after-free in netlbl_catmap_walk()
	x86: Increase exception stack sizes
	mwifiex: Run SET_BSS_MODE when changing from P2P to STATION vif-type
	mwifiex: Properly initialize private structure on interface type changes
	media: mt9p031: Fix corrupted frame after restarting stream
	media: netup_unidvb: handle interrupt properly according to the firmware
	media: uvcvideo: Set capability in s_param
	media: s5p-mfc: fix possible null-pointer dereference in s5p_mfc_probe()
	media: s5p-mfc: Add checking to s5p_mfc_probe().
	media: mceusb: return without resubmitting URB in case of -EPROTO error.
	ia64: don't do IA64_CMPXCHG_DEBUG without CONFIG_PRINTK
	ACPICA: Avoid evaluating methods too early during system resume
	media: usb: dvd-usb: fix uninit-value bug in dibusb_read_eeprom_byte()
	tracefs: Have tracefs directories not set OTH permission bits by default
	ath: dfs_pattern_detector: Fix possible null-pointer dereference in channel_detector_create()
	ACPI: battery: Accept charges over the design capacity as full
	leaking_addresses: Always print a trailing newline
	memstick: r592: Fix a UAF bug when removing the driver
	lib/xz: Avoid overlapping memcpy() with invalid input with in-place decompression
	lib/xz: Validate the value before assigning it to an enum variable
	tracing/cfi: Fix cmp_entries_* functions signature mismatch
	mwl8k: Fix use-after-free in mwl8k_fw_state_machine()
	PM: hibernate: Get block device exclusively in swsusp_check()
	iwlwifi: mvm: disable RX-diversity in powersave
	smackfs: use __GFP_NOFAIL for smk_cipso_doi()
	ARM: clang: Do not rely on lr register for stacktrace
	gre/sit: Don't generate link-local addr if addr_gen_mode is IN6_ADDR_GEN_MODE_NONE
	ARM: 9136/1: ARMv7-M uses BE-8, not BE-32
	spi: bcm-qspi: Fix missing clk_disable_unprepare() on error in bcm_qspi_probe()
	parisc: fix warning in flush_tlb_all
	task_stack: Fix end_of_stack() for architectures with upwards-growing stack
	parisc/kgdb: add kgdb_roundup() to make kgdb work with idle polling
	cgroup: Make rebind_subsystems() disable v2 controllers all at once
	media: dvb-usb: fix ununit-value in az6027_rc_query
	media: mtk-vpu: Fix a resource leak in the error handling path of 'mtk_vpu_probe()'
	media: si470x: Avoid card name truncation
	media: cx23885: Fix snd_card_free call on null card pointer
	cpuidle: Fix kobject memory leaks in error paths
	ath9k: Fix potential interrupt storm on queue reset
	crypto: qat - detect PFVF collision after ACK
	crypto: qat - disregard spurious PFVF interrupts
	hwrng: mtk - Force runtime pm ops for sleep ops
	b43legacy: fix a lower bounds test
	b43: fix a lower bounds test
	memstick: avoid out-of-range warning
	memstick: jmb38x_ms: use appropriate free function in jmb38x_ms_alloc_host()
	hwmon: Fix possible memleak in __hwmon_device_register()
	ath10k: fix max antenna gain unit
	drm/msm: uninitialized variable in msm_gem_import()
	net: stream: don't purge sk_error_queue in sk_stream_kill_queues()
	mmc: mxs-mmc: disable regulator on error and in the remove function
	platform/x86: thinkpad_acpi: Fix bitwise vs. logical warning
	mwifiex: Send DELBA requests according to spec
	phy: micrel: ksz8041nl: do not use power down mode
	PM: hibernate: fix sparse warnings
	smackfs: use netlbl_cfg_cipsov4_del() for deleting cipso_v4_doi
	s390/gmap: don't unconditionally call pte_unmap_unlock() in __gmap_zap()
	irq: mips: avoid nested irq_enter()
	samples/kretprobes: Fix return value if register_kretprobe() failed
	libertas_tf: Fix possible memory leak in probe and disconnect
	libertas: Fix possible memory leak in probe and disconnect
	net: amd-xgbe: Toggle PLL settings during rate change
	net: phylink: avoid mvneta warning when setting pause parameters
	crypto: pcrypt - Delay write to padata->info
	ibmvnic: Process crqs after enabling interrupts
	RDMA/rxe: Fix wrong port_cap_flags
	ARM: s3c: irq-s3c24xx: Fix return value check for s3c24xx_init_intc()
	ARM: dts: at91: tse850: the emac<->phy interface is rmii
	scsi: dc395: Fix error case unwinding
	MIPS: loongson64: make CPU_LOONGSON64 depends on MIPS_FP_SUPPORT
	JFS: fix memleak in jfs_mount
	ALSA: hda: Reduce udelay() at SKL+ position reporting
	arm: dts: omap3-gta04a4: accelerometer irq fix
	soc/tegra: Fix an error handling path in tegra_powergate_power_up()
	memory: fsl_ifc: fix leak of irq and nand_irq in fsl_ifc_ctrl_probe
	video: fbdev: chipsfb: use memset_io() instead of memset()
	serial: 8250_dw: Drop wrong use of ACPI_PTR()
	usb: gadget: hid: fix error code in do_config()
	power: supply: rt5033_battery: Change voltage values to µV
	scsi: csiostor: Uninitialized data in csio_ln_vnp_read_cbfn()
	RDMA/mlx4: Return missed an error if device doesn't support steering
	ASoC: cs42l42: Correct some register default values
	ASoC: cs42l42: Defer probe if request_threaded_irq() returns EPROBE_DEFER
	serial: xilinx_uartps: Fix race condition causing stuck TX
	mips: cm: Convert to bitfield API to fix out-of-bounds access
	power: supply: bq27xxx: Fix kernel crash on IRQ handler register error
	apparmor: fix error check
	rpmsg: Fix rpmsg_create_ept return when RPMSG config is not defined
	pnfs/flexfiles: Fix misplaced barrier in nfs4_ff_layout_prepare_ds
	drm/plane-helper: fix uninitialized variable reference
	PCI: aardvark: Don't spam about PIO Response Status
	NFS: Fix deadlocks in nfs_scan_commit_list()
	fs: orangefs: fix error return code of orangefs_revalidate_lookup()
	mtd: spi-nor: hisi-sfc: Remove excessive clk_disable_unprepare()
	dmaengine: at_xdmac: fix AT_XDMAC_CC_PERID() macro
	auxdisplay: img-ascii-lcd: Fix lock-up when displaying empty string
	auxdisplay: ht16k33: Connect backlight to fbdev
	auxdisplay: ht16k33: Fix frame buffer device blanking
	netfilter: nfnetlink_queue: fix OOB when mac header was cleared
	dmaengine: dmaengine_desc_callback_valid(): Check for `callback_result`
	m68k: set a default value for MEMORY_RESERVE
	watchdog: f71808e_wdt: fix inaccurate report in WDIOC_GETTIMEOUT
	ar7: fix kernel builds for compiler test
	scsi: qla2xxx: Turn off target reset during issue_lip
	i2c: xlr: Fix a resource leak in the error handling path of 'xlr_i2c_probe()'
	xen-pciback: Fix return in pm_ctrl_init()
	net: davinci_emac: Fix interrupt pacing disable
	ACPI: PMIC: Fix intel_pmic_regs_handler() read accesses
	bonding: Fix a use-after-free problem when bond_sysfs_slave_add() failed
	mm/zsmalloc.c: close race window between zs_pool_dec_isolated() and zs_unregister_migration()
	llc: fix out-of-bound array index in llc_sk_dev_hash()
	nfc: pn533: Fix double free when pn533_fill_fragment_skbs() fails
	vsock: prevent unnecessary refcnt inc for nonblocking connect
	USB: chipidea: fix interrupt deadlock
	ARM: 9155/1: fix early early_iounmap()
	ARM: 9156/1: drop cc-option fallbacks for architecture selection
	powerpc/lib: Add helper to check if offset is within conditional branch range
	powerpc/bpf: Validate branch ranges
	powerpc/bpf: Fix BPF_SUB when imm == 0x80000000
	mm, oom: pagefault_out_of_memory: don't force global OOM for dying tasks
	mm, oom: do not trigger out_of_memory from the #PF
	s390/cio: check the subchannel validity for dev_busid
	PCI: Add PCI_EXP_DEVCTL_PAYLOAD_* macros
	ext4: fix lazy initialization next schedule time computation in more granular unit
	tracing: Resize tgid_map to pid_max, not PID_MAX_DEFAULT
	parisc/entry: fix trace test in syscall exit path
	PCI/MSI: Destroy sysfs before freeing entries
	arm64: zynqmp: Fix serial compatible string
	scsi: lpfc: Fix list_add() corruption in lpfc_drain_txq()
	usb: musb: tusb6010: check return value after calling platform_get_resource()
	scsi: advansys: Fix kernel pointer leak
	ARM: dts: omap: fix gpmc,mux-add-data type
	usb: host: ohci-tmio: check return value after calling platform_get_resource()
	tty: tty_buffer: Fix the softlockup issue in flush_to_ldisc
	MIPS: sni: Fix the build
	scsi: target: Fix ordered tag handling
	scsi: target: Fix alua_tg_pt_gps_count tracking
	powerpc/5200: dts: fix memory node unit name
	ALSA: gus: fix null pointer dereference on pointer block
	powerpc/dcr: Use cmplwi instead of 3-argument cmpli
	sh: check return code of request_irq
	maple: fix wrong return value of maple_bus_init().
	sh: fix kconfig unmet dependency warning for FRAME_POINTER
	sh: define __BIG_ENDIAN for math-emu
	mips: BCM63XX: ensure that CPU_SUPPORTS_32BIT_KERNEL is set
	sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain()
	net: bnx2x: fix variable dereferenced before check
	iavf: Fix for the false positive ASQ/ARQ errors while issuing VF reset
	MIPS: generic/yamon-dt: fix uninitialized variable error
	mips: bcm63xx: add support for clk_get_parent()
	mips: lantiq: add support for clk_get_parent()
	platform/x86: hp_accel: Fix an error handling path in 'lis3lv02d_probe()'
	net: virtio_net_hdr_to_skb: count transport header in UFO
	i40e: Fix NULL ptr dereference on VSI filter sync
	NFC: reorganize the functions in nci_request
	NFC: reorder the logic in nfc_{un,}register_device
	perf/x86/intel/uncore: Fix filter_tid mask for CHA events on Skylake Server
	perf/x86/intel/uncore: Fix IIO event constraints for Skylake Server
	tun: fix bonding active backup with arp monitoring
	hexagon: export raw I/O routines for modules
	mm: kmemleak: slob: respect SLAB_NOLEAKTRACE flag
	btrfs: fix memory ordering between normal and ordered work functions
	parisc/sticon: fix reverse colors
	cfg80211: call cfg80211_stop_ap when switch from P2P_GO type
	drm/udl: fix control-message timeout
	drm/amdgpu: fix set scaling mode Full/Full aspect/Center not works on vga and dvi connectors
	perf/core: Avoid put_page() when GUP fails
	batman-adv: mcast: fix duplicate mcast packets in BLA backbone from LAN
	batman-adv: mcast: fix duplicate mcast packets from BLA backbone to mesh
	batman-adv: Consider fragmentation for needed_headroom
	batman-adv: Reserve needed_*room for fragments
	batman-adv: Don't always reallocate the fragmentation skb head
	RDMA/netlink: Add __maybe_unused to static inline in C file
	ASoC: DAPM: Cover regression by kctl change notification fix
	usb: max-3421: Use driver data instead of maintaining a list of bound devices
	soc/tegra: pmc: Fix imbalanced clock disabling in error code path
	Linux 4.14.256

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I32f0b43f5aa192eda1aa3a220a2f348ade0536d2
2021-12-16 11:36:23 +00:00
Greg Kroah-Hartman
cc48e333d0 Merge 4.14.256 into android-4.14-stable
Changes in 4.14.256
	xhci: Fix USB 3.1 enumeration issues by increasing roothub power-on-good delay
	binder: use euid from cred instead of using task
	binder: use cred instead of task for selinux checks
	Input: elantench - fix misreporting trackpoint coordinates
	Input: i8042 - Add quirk for Fujitsu Lifebook T725
	libata: fix read log timeout value
	ocfs2: fix data corruption on truncate
	mmc: dw_mmc: Dont wait for DRTO on Write RSP error
	parisc: Fix ptrace check on syscall return
	tpm: Check for integer overflow in tpm2_map_response_body()
	media: ite-cir: IR receiver stop working after receive overflow
	ALSA: ua101: fix division by zero at probe
	ALSA: 6fire: fix control and bulk message timeouts
	ALSA: line6: fix control and interrupt message timeouts
	ALSA: synth: missing check for possible NULL after the call to kstrdup
	ALSA: timer: Fix use-after-free problem
	ALSA: timer: Unconditionally unlink slave instances, too
	x86/irq: Ensure PI wakeup handler is unregistered before module unload
	cavium: Return negative value when pci_alloc_irq_vectors() fails
	scsi: qla2xxx: Fix unmap of already freed sgl
	cavium: Fix return values of the probe function
	sfc: Don't use netif_info before net_device setup
	hyperv/vmbus: include linux/bitops.h
	mmc: winbond: don't build on M68K
	bpf: Prevent increasing bpf_jit_limit above max
	xen/netfront: stop tx queues during live migration
	spi: spl022: fix Microwire full duplex mode
	watchdog: Fix OMAP watchdog early handling
	vmxnet3: do not stop tx queues after netif_device_detach()
	btrfs: fix lost error handling when replaying directory deletes
	hwmon: (pmbus/lm25066) Add offset coefficients
	regulator: s5m8767: do not use reset value as DVS voltage if GPIO DVS is disabled
	regulator: dt-bindings: samsung,s5m8767: correct s5m8767,pmic-buck-default-dvs-idx property
	EDAC/sb_edac: Fix top-of-high-memory value for Broadwell/Haswell
	mwifiex: fix division by zero in fw download path
	ath6kl: fix division by zero in send path
	ath6kl: fix control-message timeout
	ath10k: fix control-message timeout
	ath10k: fix division by zero in send path
	PCI: Mark Atheros QCA6174 to avoid bus reset
	rtl8187: fix control-message timeouts
	evm: mark evm_fixmode as __ro_after_init
	wcn36xx: Fix HT40 capability for 2Ghz band
	mwifiex: Read a PCI register after writing the TX ring write pointer
	libata: fix checking of DMA state
	wcn36xx: handle connection loss indication
	RDMA/qedr: Fix NULL deref for query_qp on the GSI QP
	signal: Remove the bogus sigkill_pending in ptrace_stop
	signal/mips: Update (_save|_restore)_fp_context to fail with -EFAULT
	power: supply: max17042_battery: Prevent int underflow in set_soc_threshold
	power: supply: max17042_battery: use VFSOC for capacity when no rsns
	powerpc/85xx: Fix oops when mpc85xx_smp_guts_ids node cannot be found
	serial: core: Fix initializing and restoring termios speed
	ALSA: mixer: oss: Fix racy access to slots
	ALSA: mixer: fix deadlock in snd_mixer_oss_set_volume
	xen/balloon: add late_initcall_sync() for initial ballooning done
	PCI: aardvark: Do not clear status bits of masked interrupts
	PCI: aardvark: Do not unmask unused interrupts
	PCI: aardvark: Fix return value of MSI domain .alloc() method
	PCI: aardvark: Read all 16-bits from PCIE_MSI_PAYLOAD_REG
	quota: check block number when reading the block in quota file
	quota: correct error number in free_dqentry()
	pinctrl: core: fix possible memory leak in pinctrl_enable()
	iio: dac: ad5446: Fix ad5622_write() return value
	USB: serial: keyspan: fix memleak on probe errors
	USB: iowarrior: fix control-message timeouts
	Bluetooth: sco: Fix lock_sock() blockage by memcpy_from_msg()
	Bluetooth: fix use-after-free error in lock_sock_nested()
	platform/x86: wmi: do not fail if disabling fails
	MIPS: lantiq: dma: add small delay after reset
	MIPS: lantiq: dma: reset correct number of channel
	locking/lockdep: Avoid RCU-induced noinstr fail
	smackfs: Fix use-after-free in netlbl_catmap_walk()
	x86: Increase exception stack sizes
	mwifiex: Run SET_BSS_MODE when changing from P2P to STATION vif-type
	mwifiex: Properly initialize private structure on interface type changes
	media: mt9p031: Fix corrupted frame after restarting stream
	media: netup_unidvb: handle interrupt properly according to the firmware
	media: uvcvideo: Set capability in s_param
	media: s5p-mfc: fix possible null-pointer dereference in s5p_mfc_probe()
	media: s5p-mfc: Add checking to s5p_mfc_probe().
	media: mceusb: return without resubmitting URB in case of -EPROTO error.
	ia64: don't do IA64_CMPXCHG_DEBUG without CONFIG_PRINTK
	ACPICA: Avoid evaluating methods too early during system resume
	media: usb: dvd-usb: fix uninit-value bug in dibusb_read_eeprom_byte()
	tracefs: Have tracefs directories not set OTH permission bits by default
	ath: dfs_pattern_detector: Fix possible null-pointer dereference in channel_detector_create()
	ACPI: battery: Accept charges over the design capacity as full
	leaking_addresses: Always print a trailing newline
	memstick: r592: Fix a UAF bug when removing the driver
	lib/xz: Avoid overlapping memcpy() with invalid input with in-place decompression
	lib/xz: Validate the value before assigning it to an enum variable
	tracing/cfi: Fix cmp_entries_* functions signature mismatch
	mwl8k: Fix use-after-free in mwl8k_fw_state_machine()
	PM: hibernate: Get block device exclusively in swsusp_check()
	iwlwifi: mvm: disable RX-diversity in powersave
	smackfs: use __GFP_NOFAIL for smk_cipso_doi()
	ARM: clang: Do not rely on lr register for stacktrace
	gre/sit: Don't generate link-local addr if addr_gen_mode is IN6_ADDR_GEN_MODE_NONE
	ARM: 9136/1: ARMv7-M uses BE-8, not BE-32
	spi: bcm-qspi: Fix missing clk_disable_unprepare() on error in bcm_qspi_probe()
	parisc: fix warning in flush_tlb_all
	task_stack: Fix end_of_stack() for architectures with upwards-growing stack
	parisc/kgdb: add kgdb_roundup() to make kgdb work with idle polling
	cgroup: Make rebind_subsystems() disable v2 controllers all at once
	media: dvb-usb: fix ununit-value in az6027_rc_query
	media: mtk-vpu: Fix a resource leak in the error handling path of 'mtk_vpu_probe()'
	media: si470x: Avoid card name truncation
	media: cx23885: Fix snd_card_free call on null card pointer
	cpuidle: Fix kobject memory leaks in error paths
	ath9k: Fix potential interrupt storm on queue reset
	crypto: qat - detect PFVF collision after ACK
	crypto: qat - disregard spurious PFVF interrupts
	hwrng: mtk - Force runtime pm ops for sleep ops
	b43legacy: fix a lower bounds test
	b43: fix a lower bounds test
	memstick: avoid out-of-range warning
	memstick: jmb38x_ms: use appropriate free function in jmb38x_ms_alloc_host()
	hwmon: Fix possible memleak in __hwmon_device_register()
	ath10k: fix max antenna gain unit
	drm/msm: uninitialized variable in msm_gem_import()
	net: stream: don't purge sk_error_queue in sk_stream_kill_queues()
	mmc: mxs-mmc: disable regulator on error and in the remove function
	platform/x86: thinkpad_acpi: Fix bitwise vs. logical warning
	mwifiex: Send DELBA requests according to spec
	phy: micrel: ksz8041nl: do not use power down mode
	PM: hibernate: fix sparse warnings
	smackfs: use netlbl_cfg_cipsov4_del() for deleting cipso_v4_doi
	s390/gmap: don't unconditionally call pte_unmap_unlock() in __gmap_zap()
	irq: mips: avoid nested irq_enter()
	samples/kretprobes: Fix return value if register_kretprobe() failed
	libertas_tf: Fix possible memory leak in probe and disconnect
	libertas: Fix possible memory leak in probe and disconnect
	net: amd-xgbe: Toggle PLL settings during rate change
	net: phylink: avoid mvneta warning when setting pause parameters
	crypto: pcrypt - Delay write to padata->info
	ibmvnic: Process crqs after enabling interrupts
	RDMA/rxe: Fix wrong port_cap_flags
	ARM: s3c: irq-s3c24xx: Fix return value check for s3c24xx_init_intc()
	ARM: dts: at91: tse850: the emac<->phy interface is rmii
	scsi: dc395: Fix error case unwinding
	MIPS: loongson64: make CPU_LOONGSON64 depends on MIPS_FP_SUPPORT
	JFS: fix memleak in jfs_mount
	ALSA: hda: Reduce udelay() at SKL+ position reporting
	arm: dts: omap3-gta04a4: accelerometer irq fix
	soc/tegra: Fix an error handling path in tegra_powergate_power_up()
	memory: fsl_ifc: fix leak of irq and nand_irq in fsl_ifc_ctrl_probe
	video: fbdev: chipsfb: use memset_io() instead of memset()
	serial: 8250_dw: Drop wrong use of ACPI_PTR()
	usb: gadget: hid: fix error code in do_config()
	power: supply: rt5033_battery: Change voltage values to µV
	scsi: csiostor: Uninitialized data in csio_ln_vnp_read_cbfn()
	RDMA/mlx4: Return missed an error if device doesn't support steering
	ASoC: cs42l42: Correct some register default values
	ASoC: cs42l42: Defer probe if request_threaded_irq() returns EPROBE_DEFER
	serial: xilinx_uartps: Fix race condition causing stuck TX
	mips: cm: Convert to bitfield API to fix out-of-bounds access
	power: supply: bq27xxx: Fix kernel crash on IRQ handler register error
	apparmor: fix error check
	rpmsg: Fix rpmsg_create_ept return when RPMSG config is not defined
	pnfs/flexfiles: Fix misplaced barrier in nfs4_ff_layout_prepare_ds
	drm/plane-helper: fix uninitialized variable reference
	PCI: aardvark: Don't spam about PIO Response Status
	NFS: Fix deadlocks in nfs_scan_commit_list()
	fs: orangefs: fix error return code of orangefs_revalidate_lookup()
	mtd: spi-nor: hisi-sfc: Remove excessive clk_disable_unprepare()
	dmaengine: at_xdmac: fix AT_XDMAC_CC_PERID() macro
	auxdisplay: img-ascii-lcd: Fix lock-up when displaying empty string
	auxdisplay: ht16k33: Connect backlight to fbdev
	auxdisplay: ht16k33: Fix frame buffer device blanking
	netfilter: nfnetlink_queue: fix OOB when mac header was cleared
	dmaengine: dmaengine_desc_callback_valid(): Check for `callback_result`
	m68k: set a default value for MEMORY_RESERVE
	watchdog: f71808e_wdt: fix inaccurate report in WDIOC_GETTIMEOUT
	ar7: fix kernel builds for compiler test
	scsi: qla2xxx: Turn off target reset during issue_lip
	i2c: xlr: Fix a resource leak in the error handling path of 'xlr_i2c_probe()'
	xen-pciback: Fix return in pm_ctrl_init()
	net: davinci_emac: Fix interrupt pacing disable
	ACPI: PMIC: Fix intel_pmic_regs_handler() read accesses
	bonding: Fix a use-after-free problem when bond_sysfs_slave_add() failed
	mm/zsmalloc.c: close race window between zs_pool_dec_isolated() and zs_unregister_migration()
	llc: fix out-of-bound array index in llc_sk_dev_hash()
	nfc: pn533: Fix double free when pn533_fill_fragment_skbs() fails
	vsock: prevent unnecessary refcnt inc for nonblocking connect
	USB: chipidea: fix interrupt deadlock
	ARM: 9155/1: fix early early_iounmap()
	ARM: 9156/1: drop cc-option fallbacks for architecture selection
	powerpc/lib: Add helper to check if offset is within conditional branch range
	powerpc/bpf: Validate branch ranges
	powerpc/bpf: Fix BPF_SUB when imm == 0x80000000
	mm, oom: pagefault_out_of_memory: don't force global OOM for dying tasks
	mm, oom: do not trigger out_of_memory from the #PF
	s390/cio: check the subchannel validity for dev_busid
	PCI: Add PCI_EXP_DEVCTL_PAYLOAD_* macros
	ext4: fix lazy initialization next schedule time computation in more granular unit
	tracing: Resize tgid_map to pid_max, not PID_MAX_DEFAULT
	parisc/entry: fix trace test in syscall exit path
	PCI/MSI: Destroy sysfs before freeing entries
	arm64: zynqmp: Fix serial compatible string
	scsi: lpfc: Fix list_add() corruption in lpfc_drain_txq()
	usb: musb: tusb6010: check return value after calling platform_get_resource()
	scsi: advansys: Fix kernel pointer leak
	ARM: dts: omap: fix gpmc,mux-add-data type
	usb: host: ohci-tmio: check return value after calling platform_get_resource()
	tty: tty_buffer: Fix the softlockup issue in flush_to_ldisc
	MIPS: sni: Fix the build
	scsi: target: Fix ordered tag handling
	scsi: target: Fix alua_tg_pt_gps_count tracking
	powerpc/5200: dts: fix memory node unit name
	ALSA: gus: fix null pointer dereference on pointer block
	powerpc/dcr: Use cmplwi instead of 3-argument cmpli
	sh: check return code of request_irq
	maple: fix wrong return value of maple_bus_init().
	sh: fix kconfig unmet dependency warning for FRAME_POINTER
	sh: define __BIG_ENDIAN for math-emu
	mips: BCM63XX: ensure that CPU_SUPPORTS_32BIT_KERNEL is set
	sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain()
	net: bnx2x: fix variable dereferenced before check
	iavf: Fix for the false positive ASQ/ARQ errors while issuing VF reset
	MIPS: generic/yamon-dt: fix uninitialized variable error
	mips: bcm63xx: add support for clk_get_parent()
	mips: lantiq: add support for clk_get_parent()
	platform/x86: hp_accel: Fix an error handling path in 'lis3lv02d_probe()'
	net: virtio_net_hdr_to_skb: count transport header in UFO
	i40e: Fix NULL ptr dereference on VSI filter sync
	NFC: reorganize the functions in nci_request
	NFC: reorder the logic in nfc_{un,}register_device
	perf/x86/intel/uncore: Fix filter_tid mask for CHA events on Skylake Server
	perf/x86/intel/uncore: Fix IIO event constraints for Skylake Server
	tun: fix bonding active backup with arp monitoring
	hexagon: export raw I/O routines for modules
	mm: kmemleak: slob: respect SLAB_NOLEAKTRACE flag
	btrfs: fix memory ordering between normal and ordered work functions
	parisc/sticon: fix reverse colors
	cfg80211: call cfg80211_stop_ap when switch from P2P_GO type
	drm/udl: fix control-message timeout
	drm/amdgpu: fix set scaling mode Full/Full aspect/Center not works on vga and dvi connectors
	perf/core: Avoid put_page() when GUP fails
	batman-adv: mcast: fix duplicate mcast packets in BLA backbone from LAN
	batman-adv: mcast: fix duplicate mcast packets from BLA backbone to mesh
	batman-adv: Consider fragmentation for needed_headroom
	batman-adv: Reserve needed_*room for fragments
	batman-adv: Don't always reallocate the fragmentation skb head
	RDMA/netlink: Add __maybe_unused to static inline in C file
	ASoC: DAPM: Cover regression by kctl change notification fix
	usb: max-3421: Use driver data instead of maintaining a list of bound devices
	soc/tegra: pmc: Fix imbalanced clock disabling in error code path
	Linux 4.14.256

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I32f0b43f5aa192eda1aa3a220a2f348ade0536d2
2021-11-26 15:15:32 +01:00
Waiman Long
b173a3a93b cgroup: Make rebind_subsystems() disable v2 controllers all at once
[ Upstream commit 7ee285395b211cad474b2b989db52666e0430daf ]

It was found that the following warning was displayed when remounting
controllers from cgroup v2 to v1:

[ 8042.997778] WARNING: CPU: 88 PID: 80682 at kernel/cgroup/cgroup.c:3130 cgroup_apply_control_disable+0x158/0x190
   :
[ 8043.091109] RIP: 0010:cgroup_apply_control_disable+0x158/0x190
[ 8043.096946] Code: ff f6 45 54 01 74 39 48 8d 7d 10 48 c7 c6 e0 46 5a a4 e8 7b 67 33 00 e9 41 ff ff ff 49 8b 84 24 e8 01 00 00 0f b7 40 08 eb 95 <0f> 0b e9 5f ff ff ff 48 83 c4 08 5b 5d 41 5c 41 5d 41 5e 41 5f c3
[ 8043.115692] RSP: 0018:ffffba8a47c23d28 EFLAGS: 00010202
[ 8043.120916] RAX: 0000000000000036 RBX: ffffffffa624ce40 RCX: 000000000000181a
[ 8043.128047] RDX: ffffffffa63c43e0 RSI: ffffffffa63c43e0 RDI: ffff9d7284ee1000
[ 8043.135180] RBP: ffff9d72874c5800 R08: ffffffffa624b090 R09: 0000000000000004
[ 8043.142314] R10: ffffffffa624b080 R11: 0000000000002000 R12: ffff9d7284ee1000
[ 8043.149447] R13: ffff9d7284ee1000 R14: ffffffffa624ce70 R15: ffffffffa6269e20
[ 8043.156576] FS:  00007f7747cff740(0000) GS:ffff9d7a5fc00000(0000) knlGS:0000000000000000
[ 8043.164663] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8043.170409] CR2: 00007f7747e96680 CR3: 0000000887d60001 CR4: 00000000007706e0
[ 8043.177539] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 8043.184673] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 8043.191804] PKRU: 55555554
[ 8043.194517] Call Trace:
[ 8043.196970]  rebind_subsystems+0x18c/0x470
[ 8043.201070]  cgroup_setup_root+0x16c/0x2f0
[ 8043.205177]  cgroup1_root_to_use+0x204/0x2a0
[ 8043.209456]  cgroup1_get_tree+0x3e/0x120
[ 8043.213384]  vfs_get_tree+0x22/0xb0
[ 8043.216883]  do_new_mount+0x176/0x2d0
[ 8043.220550]  __x64_sys_mount+0x103/0x140
[ 8043.224474]  do_syscall_64+0x38/0x90
[ 8043.228063]  entry_SYSCALL_64_after_hwframe+0x44/0xae

It was caused by the fact that rebind_subsystem() disables
controllers to be rebound one by one. If more than one disabled
controllers are originally from the default hierarchy, it means that
cgroup_apply_control_disable() will be called multiple times for the
same default hierarchy. A controller may be killed by css_kill() in
the first round. In the second round, the killed controller may not be
completely dead yet leading to the warning.

To avoid this problem, we collect all the ssid's of controllers that
needed to be disabled from the default hierarchy and then disable them
in one go instead of one by one.

Fixes: 334c3679ec ("cgroup: reimplement rebind_subsystems() using cgroup_apply_control() and friends")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26 11:40:29 +01:00
Suren Baghdasaryan
b98aadcdb4 BACKPORT: cgroup: make per-cgroup pressure stall tracking configurable
PSI accounts stalls for each cgroup separately and aggregates it at each
level of the hierarchy. This causes additional overhead with psi_avgs_work
being called for each cgroup in the hierarchy. psi_avgs_work has been
highly optimized, however on systems with large number of cgroups the
overhead becomes noticeable.
Systems which use PSI only at the system level could avoid this overhead
if PSI can be configured to skip per-cgroup stall accounting.
Add "cgroup_disable=pressure" kernel command-line option to allow
requesting system-wide only pressure stall accounting. When set, it
keeps system-wide accounting under /proc/pressure/ but skips accounting
for individual cgroups and does not expose PSI nodes in cgroup hierarchy.

Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Link:  https://lore.kernel.org/patchwork/patch/1435705
(cherry picked from commit 3958e2d0c34e18c41b60dc01832bd670a59ef70f
 https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git tj)

Conflicts:
        include/linux/cgroup-defs.h
        kernel/cgroup/cgroup.c

1. Trivial merge conflict in cgroup-defs.h due to missing CFTYPE_DEBUG
2. Changed flags to (CFTYPE_NOT_ON_ROOT | CFTYPE_PRESSURE) in cgroup.c
because in 4.14 psi files were allowed only in non-root cgroups.
3. Dropped changes in show_delegatable_files() because it's missing in
4.14.

Bug: 178872719
Bug: 191734423
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Change-Id: Ifc8fbc52f9a1131d7c2668edbb44c525c76c3360
Git-commit: d6e8ea9269
Git-repo: https://android.googlesource.com/kernel/common/
Signed-off-by: Srinivasarao Pathipati <quic_spathi@quicinc.com>
2021-11-18 21:29:17 -08:00
kondors1995
9fc8417d64 Merge branch 'android-4.14-stable' of github.com:aosp-mirror/kernel_common into 11.0 2021-10-25 16:54:02 +00:00
Park Ju Hyung
0e96c2ce5b cgroup: use kmem_cache pool for struct cgrp_cset_link
These get allocated and freed millions of times on Android.

Use a dedicated kmem_cache pool and avoid costly dynamic memory allocations.

Signed-off-by: Park Ju Hyung <qkrwngud825@gmail.com>
Signed-off-by: Adam W. Willis <return.of.octobot@gmail.com>
2021-10-20 22:09:19 +00:00
Tejun Heo
37dc361c9a cgroup: Use rcu_work instead of explicit rcu and work item
Workqueue now has rcu_work.  Use it instead of open-coding rcu -> work
item bouncing.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Yousef Algadri <yusufgadrie@gmail.com>
Signed-off-by: Panchajanya1999 <panchajanya@azure-dev.live>
(cherry picked from commit 0d26f988c76c7e0f182f1745429147281e5dab64)
2021-10-20 22:09:16 +00:00
Suren Baghdasaryan
d6e8ea9269 BACKPORT: cgroup: make per-cgroup pressure stall tracking configurable
PSI accounts stalls for each cgroup separately and aggregates it at each
level of the hierarchy. This causes additional overhead with psi_avgs_work
being called for each cgroup in the hierarchy. psi_avgs_work has been
highly optimized, however on systems with large number of cgroups the
overhead becomes noticeable.
Systems which use PSI only at the system level could avoid this overhead
if PSI can be configured to skip per-cgroup stall accounting.
Add "cgroup_disable=pressure" kernel command-line option to allow
requesting system-wide only pressure stall accounting. When set, it
keeps system-wide accounting under /proc/pressure/ but skips accounting
for individual cgroups and does not expose PSI nodes in cgroup hierarchy.

Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Link:  https://lore.kernel.org/patchwork/patch/1435705
(cherry picked from commit 3958e2d0c34e18c41b60dc01832bd670a59ef70f
 https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git tj)

Conflicts:
        include/linux/cgroup-defs.h
        kernel/cgroup/cgroup.c

1. Trivial merge conflict in cgroup-defs.h due to missing CFTYPE_DEBUG
2. Changed flags to (CFTYPE_NOT_ON_ROOT | CFTYPE_PRESSURE) in cgroup.c
because in 4.14 psi files were allowed only in non-root cgroups.
3. Dropped changes in show_delegatable_files() because it's missing in
4.14.

Bug: 178872719
Bug: 191734423
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Change-Id: Ifc8fbc52f9a1131d7c2668edbb44c525c76c3360
2021-10-18 10:50:18 -07:00
Tejun Heo
87549f0808 UPSTREAM: cgroup: add cgroup_parse_float()
cgroup already uses floating point for percent[ile] numbers and there
are several controllers which want to take them as input.  Add a
generic parse helper to handle inputs.

Update the interface convention documentation about the use of
percentage numbers.  While at it, also clarify the default time unit.

Bug: 120440300
Signed-off-by: Tejun Heo <tj@kernel.org>
(cherry picked from commit a5e112e6424adb77d953eac20e6936b952fd6b32)
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Change-Id: Ic1fcf21d7955eb8edd2e8e91517bca6aef41694f
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Panchajanya1999 <panchajanya@azure-dev.live>
2021-08-30 10:36:56 +00:00