https://source.android.com/docs/security/bulletin/2024-05-01
CVE-2023-4622
* tag 'ASB-2024-05-05_4.19-stable' of https://android.googlesource.com/kernel/common:
Revert "timers: Rename del_timer_sync() to timer_delete_sync()"
Revert "geneve: make sure to pull inner header in geneve_rx()"
Linux 4.19.312
amdkfd: use calloc instead of kzalloc to avoid integer overflow
initramfs: fix populate_initrd_image() section mismatch
ip_gre: do not report erspan version on GRE interface
erspan: Check IFLA_GRE_ERSPAN_VER is set.
VMCI: Fix possible memcpy() run-time warning in vmci_datagram_invoke_guest_handler()
Bluetooth: btintel: Fixe build regression
x86/mm/pat: fix VM_PAT handling in COW mappings
virtio: reenable config if freezing device failed
drm/vkms: call drm_atomic_helper_shutdown before drm_dev_put()
tty: n_gsm: require CAP_NET_ADMIN to attach N_GSM0710 ldisc
fbmon: prevent division by zero in fb_videomode_from_videomode()
fbdev: viafb: fix typo in hw_bitblt_1 and hw_bitblt_2
usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined
tools: iio: replace seekdir() in iio_generic_buffer
ktest: force $buildonly = 1 for 'make_warnings_file' test type
Input: allocate keycode for Display refresh rate toggle
block: prevent division by zero in blk_rq_stat_sum()
SUNRPC: increase size of rpc_wait_queue.qlen from unsigned short to unsigned int
drm/amd/display: Fix nanosec stat overflow
media: sta2x11: fix irq handler cast
isofs: handle CDs with bad root inode but good Joliet root directory
scsi: lpfc: Fix possible memory leak in lpfc_rcv_padisc()
sysv: don't call sb_bread() with pointers_lock held
Input: synaptics-rmi4 - fail probing if memory allocation for "phys" fails
Bluetooth: btintel: Fix null ptr deref in btintel_read_version
btrfs: send: handle path ref underflow in header iterate_inode_ref()
btrfs: export: handle invalid inode or root reference in btrfs_get_parent()
btrfs: handle chunk tree lookup error in btrfs_relocate_sys_chunks()
tools/power x86_energy_perf_policy: Fix file leak in get_pkg_num()
arm64: dts: rockchip: fix rk3399 hdmi ports node
VMCI: Fix memcpy() run-time warning in dg_dispatch_as_host()
wifi: ath9k: fix LNA selection in ath_ant_try_scan()
ALSA: hda/realtek: Update Panasonic CF-SZ6 quirk to support headset with microphone
ata: sata_mv: Fix PCI device ID table declaration compilation warning
ata: sata_sx4: fix pdc20621_get_from_dimm() on 64-bit
ASoC: ops: Fix wraparound for mask in snd_soc_get_volsw
erspan: make sure erspan_base_hdr is present in skb->head
erspan: Add type I version 0 support.
init: open /initrd.image with O_LARGEFILE
initramfs: switch initramfs unpacking to struct file based APIs
fs: add a vfs_fchmod helper
fs: add a vfs_fchown helper
initramfs: factor out a helper to populate the initrd image
staging: vc04_services: fix information leak in create_component()
staging: vc04_services: changen strncpy() to strscpy_pad()
staging: mmal-vchiq: Fix client_component for 64 bit kernel
staging: mmal-vchiq: Allocate and free components as required
staging: mmal-vchiq: Avoid use of bool in structures
i40e: fix vf may be used uninitialized in this function warning
ipv6: Fix infinite recursion in fib6_dump_done().
selftests: reuseaddr_conflict: add missing new line at the end of the output
net: stmmac: fix rx queue priority assignment
net/sched: act_skbmod: prevent kernel-infoleak
netfilter: nf_tables: Fix potential data-race in __nft_flowtable_type_get()
mm, vmscan: prevent infinite loop for costly GFP_NOIO | __GFP_RETRY_MAYFAIL allocations
Revert "x86/mm/ident_map: Use gbpages only where full GB page should be mapped."
net/rds: fix possible cp null dereference
netfilter: nf_tables: disallow timeout for anonymous sets
Bluetooth: Fix TOCTOU in HCI debugfs implementation
Bluetooth: hci_event: set the conn encrypted before conn establishes
r8169: fix issue caused by buggy BIOS on certain boards with RTL8168d
tcp: properly terminate timers for kernel sockets
mptcp: add sk_stop_timer_sync helper
nfc: nci: Fix uninit-value in nci_dev_up and nci_ntf_packet
USB: core: Fix deadlock in usb_deauthorize_interface()
scsi: lpfc: Correct size for wqe for memset()
x86/cpu: Enable STIBP on AMD if Automatic IBRS is enabled
scsi: qla2xxx: Fix command flush on cable pull
usb: udc: remove warning when queue disabled ep
usb: dwc2: gadget: LPM flow fix
usb: dwc2: host: Fix ISOC flow in DDMA mode
usb: dwc2: host: Fix hibernation flow
usb: dwc2: host: Fix remote wakeup from hibernation
loop: loop_set_status_from_info() check before assignment
loop: Check for overflow while configuring loop
loop: Factor out configuring loop from status
powerpc: xor_vmx: Add '-mhard-float' to CFLAGS
efivarfs: Request at most 512 bytes for variable names
perf/core: Fix reentry problem in perf_output_read_group()
loop: properly observe rotational flag of underlying device
loop: Refactor loop_set_status() size calculation
loop: Factor out setting loop device size
loop: Remove sector_t truncation checks
loop: Call loop_config_discard() only after new config is applied
Revert "loop: Check for overflow while configuring loop"
btrfs: allocate btrfs_ioctl_defrag_range_args on stack
printk: Update @console_may_schedule in console_trylock_spinning()
fs/aio: Check IOCB_AIO_RW before the struct aio_kiocb conversion
ALSA: sh: aica: reorder cleanup operations to avoid UAF bugs
usb: cdc-wdm: close race between read and workqueue
exec: Fix NOMMU linux_binprm::exec in transfer_args_to_stack()
wifi: mac80211: check/clear fast rx for non-4addr sta VLAN changes
mm/migrate: set swap entry values of THP tail pages properly.
mm/memory-failure: fix an incorrect use of tail pages
vt: fix memory overlapping when deleting chars in the buffer
vt: fix unicode buffer corruption when deleting characters
tty: serial: fsl_lpuart: avoid idle preamble pending if CTS is enabled
usb: port: Don't try to peer unused USB ports based on location
usb: gadget: ncm: Fix handling of zero block length packets
USB: usb-storage: Prevent divide-by-0 error in isd200_ata_command
ALSA: hda/realtek - Fix headset Mic no show at resume back for Lenovo ALC897 platform
xfrm: Avoid clang fortify warning in copy_to_user_tmpl()
netfilter: nf_tables: reject constant set with timeout
netfilter: nf_tables: disallow anonymous set with timeout flag
comedi: comedi_test: Prevent timers rescheduling during deletion
ahci: asm1064: asm1166: don't limit reported ports
ahci: asm1064: correct count of reported ports
x86/CPU/AMD: Update the Zenbleed microcode revisions
nilfs2: prevent kernel bug at submit_bh_wbc()
nilfs2: use a more common logging style
nilfs2: fix failure to detect DAT corruption in btree and direct mappings
memtest: use {READ,WRITE}_ONCE in memory scanning
drm/vc4: hdmi: do not return negative values from .get_modes()
drm/imx/ipuv3: do not return negative values from .get_modes()
s390/zcrypt: fix reference counting on zcrypt card objects
soc: fsl: qbman: Use raw spinlock for cgr_lock
soc: fsl: qbman: Add CGR update function
soc: fsl: qbman: Add helper for sanity checking cgr ops
soc: fsl: qbman: Always disable interrupts when taking cgr_lock
vfio/platform: Disable virqfds on cleanup
kbuild: Move -Wenum-{compare-conditional,enum-conversion} into W=1
speakup: Fix 8bit characters from direct synth
slimbus: core: Remove usage of the deprecated ida_simple_xx() API
ext4: fix corruption during on-line resize
hwmon: (amc6821) add of_match table
mmc: core: Fix switch on gp3 partition
dm-raid: fix lockdep waring in "pers->hot_add_disk"
Revert "Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d""
PCI/PM: Drain runtime-idle callbacks before driver removal
PCI: Drop pci_device_remove() test of pci_dev->driver
fuse: don't unhash root
mmc: tmio: avoid concurrent runs of mmc_request_done()
PM: sleep: wakeirq: fix wake irq warning in system suspend
USB: serial: cp210x: add pid/vid for TDK NC0110013M and MM0110113M
USB: serial: option: add MeiG Smart SLM320 product
USB: serial: cp210x: add ID for MGP Instruments PDS100
USB: serial: add device ID for VeriFone adapter
USB: serial: ftdi_sio: add support for GMC Z216C Adapter IR-USB
powerpc/fsl: Fix mfpmr build errors with newer binutils
clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays
clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays
clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays
PM: suspend: Set mem_sleep_current during kernel command line setup
parisc: Strip upper 32 bit of sum in csum_ipv6_magic for 64-bit builds
parisc: Fix csum_ipv6_magic on 64-bit systems
parisc: Fix csum_ipv6_magic on 32-bit systems
parisc: Fix ip_fast_csum
parisc: Do not hardcode registers in checksum functions
ubi: correct the calculation of fastmap size
ubi: Check for too small LEB size in VTBL code
ubifs: Set page uptodate in the correct place
fat: fix uninitialized field in nostale filehandles
crypto: qat - resolve race condition during AER recovery
crypto: qat - fix double free during reset
sparc: vDSO: fix return value of __setup handler
sparc64: NMI watchdog: fix return value of __setup handler
KVM: Always flush async #PF workqueue when vCPU is being destroyed
media: xc4000: Fix atomicity violation in xc4000_get_frequency
arm: dts: marvell: Fix maxium->maxim typo in brownstone dts
ARM: dts: mmp2-brownstone: Don't redeclare phandle references
smack: Handle SMACK64TRANSMUTE in smack_inode_setsecurity()
smack: Set SMACK64TRANSMUTE only for dirs in smack_inode_setxattr()
wifi: brcmfmac: Fix use-after-free bug in brcmf_cfg80211_detach
timers: Rename del_timer_sync() to timer_delete_sync()
timers: Use del_timer_sync() even on UP
timers: Update kernel-doc for various functions
timers: Prepare support for PREEMPT_RT
timer/trace: Improve timer tracing
timer/trace: Replace deprecated vsprintf pointer extension %pf by %ps
x86/bugs: Use sysfs_emit()
x86/cpu: Support AMD Automatic IBRS
Documentation/hw-vuln: Update spectre doc
Linux 4.19.311
crypto: af_alg - Work around empty control messages without MSG_MORE
crypto: af_alg - Fix regression on empty requests
spi: spi-mt65xx: Fix NULL pointer access in interrupt handler
net/bnx2x: Prevent access to a freed page in page_pool
hsr: Handle failures in module init
rds: introduce acquire/release ordering in acquire/release_in_xmit()
hsr: Fix uninit-value access in hsr_get_node()
net: hsr: fix placement of logical operator in a multi-line statement
usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin
staging: greybus: fix get_channel_from_mode() failure path
serial: 8250_exar: Don't remove GPIO device on suspend
rtc: mt6397: select IRQ_DOMAIN instead of depending on it
kconfig: fix infinite loop when expanding a macro at the end of file
tty: serial: samsung: fix tx_empty() to return TIOCSER_TEMT
serial: max310x: fix syntax error in IRQ error message
clk: qcom: gdsc: Add support to update GDSC transition delay
NFS: Fix an off by one in root_nfs_cat()
net: sunrpc: Fix an off by one in rpc_sockaddr2uaddr()
scsi: bfa: Fix function pointer type mismatch for hcb_qe->cbfn
scsi: csiostor: Avoid function pointer casts
ALSA: usb-audio: Stop parsing channels bits when all channels are found.
sparc32: Fix section mismatch in leon_pci_grpci
backlight: lp8788: Fully initialize backlight_properties during probe
backlight: lm3639: Fully initialize backlight_properties during probe
backlight: da9052: Fully initialize backlight_properties during probe
backlight: lm3630a: Don't set bl->props.brightness in get_brightness
backlight: lm3630a: Initialize backlight_properties on init
powerpc/embedded6xx: Fix no previous prototype for avr_uart_send() etc.
powerpc/hv-gpci: Fix the H_GET_PERF_COUNTER_INFO hcall return value checks
drm/mediatek: Fix a null pointer crash in mtk_drm_crtc_finish_page_flip
media: go7007: fix a memleak in go7007_load_encoder
media: dvb-frontends: avoid stack overflow warnings with clang
media: pvrusb2: fix uaf in pvr2_context_set_notify
drm/amdgpu: Fix missing break in ATOM_ARG_IMM Case of atom_get_src_int()
ASoC: meson: axg-tdm-interface: fix mclk setup without mclk-fs
mtd: rawnand: lpc32xx_mlc: fix irq handler prototype
crypto: arm/sha - fix function cast warnings
crypto: arm - Rename functions to avoid conflict with crypto/sha256.h
mfd: syscon: Call of_node_put() only when of_parse_phandle() takes a ref
drm/tegra: put drm_gem_object ref on error in tegra_fb_create
clk: hisilicon: hi3519: Release the correct number of gates in hi3519_clk_unregister()
PCI: Mark 3ware-9650SE Root Port Extended Tags as broken
drm/mediatek: dsi: Fix DSI RGB666 formats and definitions
clk: qcom: dispcc-sdm845: Adjust internal GDSC wait times
firmware: qcom: scm: Add WLAN VMID for Qualcomm SCM interface
media: pvrusb2: fix pvr2_stream_callback casts
media: go7007: add check of return value of go7007_read_addr()
ALSA: seq: fix function cast warnings
drm/radeon/ni: Fix wrong firmware size logging in ni_init_microcode()
perf thread_map: Free strlist on normal path in thread_map__new_by_tid_str()
quota: Fix rcu annotations of inode dquot pointers
quota: Fix potential NULL pointer dereference
quota: simplify drop_dquot_ref()
quota: check time limit when back out space/inode change
fs/quota: erase unused but set variable warning
quota: code cleanup for __dquot_alloc_space()
clk: qcom: reset: Ensure write completion on reset de/assertion
clk: qcom: reset: Commonize the de/assert functions
clk: qcom: reset: support resetting multiple bits
clk: qcom: reset: Allow specifying custom reset delay
media: edia: dvbdev: fix a use-after-free
media: dvb-core: Fix use-after-free due to race at dvb_register_device()
media: dvbdev: fix error logic at dvb_register_device()
media: dvbdev: Fix memleak in dvb_register_device
media: media/dvb: Use kmemdup rather than duplicating its implementation
media: dvbdev: remove double-unlock
media: v4l2-mem2mem: fix a memleak in v4l2_m2m_register_entity
media: v4l2-tpg: fix some memleaks in tpg_alloc
media: em28xx: annotate unchecked call to media_device_register()
ABI: sysfs-bus-pci-devices-aer_stats uses an invalid tag
perf evsel: Fix duplicate initialization of data->id in evsel__parse_sample()
media: tc358743: register v4l2 async device only after successful setup
drm/rockchip: lvds: do not print scary message when probing defer
drm/rockchip: lvds: do not overwrite error code
drm: Don't treat 0 as -1 in drm_fixp2int_ceil
drm/rockchip: inno_hdmi: Fix video timing
drm/tegra: dsi: Fix missing pm_runtime_disable() in the error handling path of tegra_dsi_probe()
drm/tegra: dsi: Fix some error handling paths in tegra_dsi_probe()
drm/tegra: dsi: Make use of the helper function dev_err_probe()
gpu: host1x: mipi: Update tegra_mipi_request() to be node based
drm/tegra: dsi: Add missing check for of_find_device_by_node
dm: call the resume method on internal suspend
dm raid: fix false positive for requeue needed during reshape
nfp: flower: handle acti_netdevs allocation failure
net/x25: fix incorrect parameter validation in the x25_getsockopt() function
net: kcm: fix incorrect parameter validation in the kcm_getsockopt) function
udp: fix incorrect parameter validation in the udp_lib_getsockopt() function
l2tp: fix incorrect parameter validation in the pppol2tp_getsockopt() function
tcp: fix incorrect parameter validation in the do_tcp_getsockopt() function
ipv6: fib6_rules: flush route cache when rule is changed
bpf: Fix stackmap overflow check on 32-bit arches
bpf: Fix hashtab overflow check on 32-bit arches
sr9800: Add check for usbnet_get_endpoints
Bluetooth: hci_core: Fix possible buffer overflow
Bluetooth: Remove superfluous call to hci_conn_check_pending()
igb: Fix missing time sync events
igb: move PEROUT and EXTTS isr logic to separate functions
mmc: wmt-sdmmc: remove an incorrect release_mem_region() call in the .remove function
SUNRPC: fix some memleaks in gssx_dec_option_array
x86, relocs: Ignore relocations in .notes section
ACPI: scan: Fix device check notification handling
ARM: dts: arm: realview: Fix development chip ROM compatible value
wifi: brcmsmac: avoid function pointer casts
iommu/amd: Mark interrupt as managed
bus: tegra-aconnect: Update dependency to ARCH_TEGRA
ACPI: processor_idle: Fix memory leak in acpi_processor_power_exit()
wifi: libertas: fix some memleaks in lbs_allocate_cmd_buffer()
af_unix: Annotate data-race of gc_in_progress in wait_for_unix_gc().
sock_diag: annotate data-races around sock_diag_handlers[family]
wifi: mwifiex: debugfs: Drop unnecessary error check for debugfs_create_dir()
wifi: b43: Disable QoS for bcm4331
wifi: b43: Stop correct queue in DMA worker when QoS is disabled
b43: main: Fix use true/false for bool type
wifi: b43: Stop/wake correct queue in PIO Tx path when QoS is disabled
wifi: b43: Stop/wake correct queue in DMA Tx path when QoS is disabled
b43: dma: Fix use true/false for bool type variable
wifi: ath10k: fix NULL pointer dereference in ath10k_wmi_tlv_op_pull_mgmt_tx_compl_ev()
timekeeping: Fix cross-timestamp interpolation for non-x86
timekeeping: Fix cross-timestamp interpolation corner case decision
timekeeping: Fix cross-timestamp interpolation on counter wrap
aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts
md: Don't clear MD_CLOSING when the raid is about to stop
md: implement ->set_read_only to hook into BLKROSET processing
block: add a new set_read_only method
md: switch to ->check_events for media change notifications
fs/select: rework stack allocation hack for clang
do_sys_name_to_handle(): use kzalloc() to fix kernel-infoleak
crypto: algif_aead - Only wake up when ctx->more is zero
crypto: af_alg - make some functions static
crypto: algif_aead - fix uninitialized ctx->init
ASoC: wm8962: Fix up incorrect error message in wm8962_set_fll
ASoC: wm8962: Enable both SPKOUTR_ENA and SPKOUTL_ENA in mono mode
ASoC: wm8962: Enable oscillator if selecting WM8962_FLL_OSC
Input: gpio_keys_polled - suppress deferred probe error for gpio
ASoC: Intel: bytcr_rt5640: Add an extra entry for the Chuwi Vi8 tablet
firewire: core: use long bus reset on gap count error
Bluetooth: rfcomm: Fix null-ptr-deref in rfcomm_check_security
scsi: mpt3sas: Prevent sending diag_reset when the controller is ready
dm-verity, dm-crypt: align "struct bvec_iter" correctly
block: sed-opal: handle empty atoms when parsing response
net/iucv: fix the allocation size of iucv_path_table array
MIPS: Clear Cause.BD in instruction_pointer_set
x86/xen: Add some null pointer checking to smp.c
ASoC: rt5645: Make LattePanda board DMI match more precise
Linux 4.19.310
selftests/vm: fix map_hugetlb length used for testing read and write
selftests/vm: fix display of page size in map_hugetlb
getrusage: use sig->stats_lock rather than lock_task_sighand()
getrusage: use __for_each_thread()
getrusage: move thread_group_cputime_adjusted() outside of lock_task_sighand()
getrusage: add the "signal_struct *sig" local variable
y2038: rusage: use __kernel_old_timeval
hv_netvsc: Register VF in netvsc_probe if NET_DEVICE_REGISTER missed
hv_netvsc: use netif_is_bond_master() instead of open code
hv_netvsc: Make netvsc/VF binding check both MAC and serial number
Input: i8042 - fix strange behavior of touchpad on Clevo NS70PU
um: allow not setting extra rpaths in the linux binary
selftests: mm: fix map_hugetlb failure on 64K page size systems
tools/selftest/vm: allow choosing mem size and page size in map_hugetlb
btrfs: ref-verify: free ref cache before clearing mount opt
netrom: Fix data-races around sysctl_net_busy_read
netrom: Fix a data-race around sysctl_netrom_link_fails_count
netrom: Fix a data-race around sysctl_netrom_routing_control
netrom: Fix a data-race around sysctl_netrom_transport_no_activity_timeout
netrom: Fix a data-race around sysctl_netrom_transport_requested_window_size
netrom: Fix a data-race around sysctl_netrom_transport_busy_delay
netrom: Fix a data-race around sysctl_netrom_transport_acknowledge_delay
netrom: Fix a data-race around sysctl_netrom_transport_maximum_tries
netrom: Fix a data-race around sysctl_netrom_transport_timeout
netrom: Fix data-races around sysctl_netrom_network_ttl_initialiser
netrom: Fix a data-race around sysctl_netrom_obsolescence_count_initialiser
netrom: Fix a data-race around sysctl_netrom_default_path_quality
netfilter: nf_conntrack_h323: Add protection for bmp length out of range
net/rds: fix WARNING in rds_conn_connect_if_down
net/ipv6: avoid possible UAF in ip6_route_mpath_notify()
geneve: make sure to pull inner header in geneve_rx()
net: move definition of pcpu_lstats to header file
net: lan78xx: fix runtime PM count underflow on link stop
lan78xx: Fix race conditions in suspend/resume handling
lan78xx: Fix partial packet errors on suspend/resume
lan78xx: Add missing return code checks
lan78xx: Fix white space and style issues
net: usb: lan78xx: Remove lots of set but unused 'ret' variables
Linux 4.19.309
gpio: 74x164: Enable output pins after registers are reset
cachefiles: fix memory leak in cachefiles_add_cache()
mmc: core: Fix eMMC initialization with 1-bit bus connection
btrfs: dev-replace: properly validate device names
wifi: nl80211: reject iftype change with mesh ID change
gtp: fix use-after-free and null-ptr-deref in gtp_newlink()
ALSA: Drop leftover snd-rtctimer stuff from Makefile
power: supply: bq27xxx-i2c: Do not free non existing IRQ
efi/capsule-loader: fix incorrect allocation size
Bluetooth: Enforce validation on max value of connection interval
Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
Bluetooth: Avoid potential use-after-free in hci_error_reset
net: usb: dm9601: fix wrong return value in dm9601_mdio_read
lan78xx: enable auto speed configuration for LAN7850 if no EEPROM is detected
tun: Fix xdp_rxq_info's queue_index when detaching
netlink: Fix kernel-infoleak-after-free in __skb_datagram_iter
Linux 4.19.308
scripts/bpf: Fix xdp_md forward declaration typo
fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio
KVM: arm64: vgic-its: Test for valid IRQ in MOVALL handler
KVM: arm64: vgic-its: Test for valid IRQ in its_sync_lpi_pending_table()
PCI/MSI: Prevent MSI hardware interrupt number truncation
s390: use the correct count for __iowrite64_copy()
packet: move from strlcpy with unused retval to strscpy
ipv6: sr: fix possible use-after-free and null-ptr-deref
nouveau: fix function cast warnings
scsi: jazz_esp: Only build if SCSI core is builtin
bpf, scripts: Correct GPL license name
scripts/bpf: teach bpf_helpers_doc.py to dump BPF helper definitions
RDMA/srpt: fix function pointer cast warnings
RDMA/srpt: Make debug output more detailed
RDMA/ulp: Use dev_name instead of ibdev->name
RDMA/srpt: Support specifying the srpt_service_guid parameter
RDMA/bnxt_re: Return error for SRQ resize
IB/hfi1: Fix a memleak in init_credit_return
usb: roles: don't get/set_role() when usb_role_switch is unregistered
usb: gadget: ncm: Avoid dropping datagrams of properly parsed NTBs
ARM: ep93xx: Add terminator to gpiod_lookup_table
l2tp: pass correct message length to ip6_append_data
gtp: fix use-after-free and null-ptr-deref in gtp_genl_dump_pdp()
dm-crypt: don't modify the data when using authenticated encryption
mm: memcontrol: switch to rcu protection in drain_all_stock()
IB/hfi1: Fix sdma.h tx->num_descs off-by-one error
pmdomain: renesas: r8a77980-sysc: CR7 must be always on
s390/qeth: Fix potential loss of L3-IP@ in case of network issues
virtio-blk: Ensure no requests in virtqueues before deleting vqs.
firewire: core: send bus reset promptly on gap count error
hwmon: (coretemp) Enlarge per package core count limit
regulator: pwm-regulator: Add validity checks in continuous .get_voltage
ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal()
ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found()
ahci: asm1166: correct count of reported ports
fbdev: sis: Error out if pixclock equals zero
fbdev: savage: Error out if pixclock equals zero
wifi: mac80211: fix race condition on enabling fast-xmit
wifi: cfg80211: fix missing interfaces when dumping
dmaengine: shdma: increase size of 'dev_id'
scsi: target: core: Add TMF to tmr_list handling
sched/rt: Disallow writing invalid values to sched_rt_period_us
sched/rt: sysctl_sched_rr_timeslice show default timeslice after reset
sched/rt: Fix sysctl_sched_rr_timeslice intial value
userfaultfd: fix mmap_changing checking in mfill_atomic_hugetlb
nilfs2: replace WARN_ONs for invalid DAT metadata block requests
memcg: add refcnt for pcpu stock to avoid UAF problem in drain_all_stock()
net: stmmac: fix notifier registration
stmmac: no need to check return value of debugfs_create functions
net/sched: Retire dsmark qdisc
net/sched: Retire ATM qdisc
net/sched: Retire CBQ qdisc
Linux 4.19.307
netfilter: nf_tables: fix pointer math issue in nft_byteorder_eval()
lsm: new security_file_ioctl_compat() hook
nilfs2: fix potential bug in end_buffer_async_write
sched/membarrier: reduce the ability to hammer on sys_membarrier
Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d"
pmdomain: core: Move the unused cleanup to a _sync initcall
irqchip/irq-brcmstb-l2: Add write memory barrier before exit
nfp: use correct macro for LengthSelect in BAR config
nilfs2: fix hang in nilfs_lookup_dirty_data_buffers()
nilfs2: fix data corruption in dsync block recovery for small block sizes
ALSA: hda/conexant: Add quirk for SWS JS201D
x86/mm/ident_map: Use gbpages only where full GB page should be mapped.
x86/Kconfig: Transmeta Crusoe is CPU family 5, not 6
serial: max310x: improve crystal stable clock detection
serial: max310x: set default value when reading clock ready bit
ring-buffer: Clean ring_buffer_poll_wait() error return
staging: iio: ad5933: fix type mismatch regression
ext4: fix double-free of blocks due to wrong extents moved_len
binder: signal epoll threads of self-work
xen-netback: properly sync TX responses
nfc: nci: free rx_data_reassembly skb on NCI device cleanup
firewire: core: correct documentation of fw_csr_string() kernel API
scsi: Revert "scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock"
usb: f_mass_storage: forbid async queue when shutdown happen
USB: hub: check for alternate port before enabling A_ALT_HNP_SUPPORT
HID: wacom: Do not register input devices until after hid_hw_start
HID: wacom: generic: Avoid reporting a serial of '0' to userspace
mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again
tracing/trigger: Fix to return error if failed to alloc snapshot
i40e: Fix waiting for queues of all VSIs to be disabled
MIPS: Add 'memory' clobber to csum_ipv6_magic() inline assembler
net: sysfs: Fix /sys/class/net/<iface> path for statistics
Documentation: net-sysfs: describe missing statistics
ASoC: rt5645: Fix deadlock in rt5645_jack_detect_work()
spi: ppc4xx: Drop write-only variable
btrfs: send: return EOPNOTSUPP on unknown flags
btrfs: forbid creating subvol qgroups
hrtimer: Report offline hrtimer enqueue
vhost: use kzalloc() instead of kmalloc() followed by memset()
Input: atkbd - skip ATKBD_CMD_SETLEDS when skipping ATKBD_CMD_GETID
USB: serial: cp210x: add ID for IMST iM871A-USB
USB: serial: option: add Fibocom FM101-GL variant
USB: serial: qcserial: add new usb-id for Dell Wireless DW5826e
net/af_iucv: clean up a try_then_request_module()
netfilter: nft_compat: restrict match/target protocol to u16
netfilter: nft_compat: reject unused compat flag
ppp_async: limit MRU to 64K
tipc: Check the bearer type before calling tipc_udp_nl_bearer_add()
rxrpc: Fix response to PING RESPONSE ACKs to a dead call
inet: read sk->sk_family once in inet_recv_error()
hwmon: (coretemp) Fix bogus core_id to attr name mapping
hwmon: (coretemp) Fix out-of-bounds memory access
hwmon: (aspeed-pwm-tacho) mutex for tach reading
atm: idt77252: fix a memleak in open_card_ubr0
phy: ti: phy-omap-usb2: Fix NULL pointer dereference for SRP
dmaengine: fix is_slave_direction() return false when DMA_DEV_TO_DEV
bonding: remove print in bond_verify_device_path
HID: apple: Add 2021 magic keyboard FN key mapping
HID: apple: Swap the Fn and Left Control keys on Apple keyboards
HID: apple: Add support for the 2021 Magic Keyboard
net: sysfs: Fix /sys/class/net/<iface> path
af_unix: fix lockdep positive in sk_diag_dump_icons()
net: ipv4: fix a memleak in ip_setup_cork
netfilter: nf_log: replace BUG_ON by WARN_ON_ONCE when putting logger
llc: call sock_orphan() at release time
ipv6: Ensure natural alignment of const ipv6 loopback and router addresses
ixgbe: Fix an error handling path in ixgbe_read_iosf_sb_reg_x550()
ixgbe: Refactor overtemp event handling
ixgbe: Refactor returning internal error codes
ixgbe: Remove non-inclusive language
net: remove unneeded break
scsi: isci: Fix an error code problem in isci_io_request_build()
wifi: cfg80211: fix RCU dereference in __cfg80211_bss_update
drm/amdgpu: Release 'adev->pm.fw' before return in 'amdgpu_device_need_post()'
ceph: fix deadlock or deadcode of misusing dget()
blk-mq: fix IO hang from sbitmap wakeup race
virtio_net: Fix "‘%d’ directive writing between 1 and 11 bytes into a region of size 10" warnings
libsubcmd: Fix memory leak in uniq()
usb: hub: Replace hardcoded quirk value with BIT() macro
PCI: Only override AMD USB controller if required
mfd: ti_am335x_tscadc: Fix TI SoC dependencies
um: net: Fix return type of uml_net_start_xmit()
um: Don't use vfprintf() for os_info()
um: Fix naming clash between UML and scheduler
leds: trigger: panic: Don't register panic notifier if creating the trigger failed
drm/amdgpu: Drop 'fence' check in 'to_amdgpu_amdkfd_fence()'
drm/amdgpu: Let KFD sync with VM fences
clk: mmp: pxa168: Fix memory leak in pxa168_clk_init()
clk: hi3620: Fix memory leak in hi3620_mmc_clk_init()
drm/msm/dpu: Ratelimit framedone timeout msgs
media: ddbridge: fix an error code problem in ddb_probe
IB/ipoib: Fix mcast list locking
drm/exynos: Call drm_atomic_helper_shutdown() at shutdown/unbind time
ALSA: hda: Intel: add HDA_ARL PCI ID support
PCI: add INTEL_HDA_ARL to pci_ids.h
media: rockchip: rga: fix swizzling for RGB formats
media: stk1160: Fixed high volume of stk1160_dbg messages
drm/mipi-dsi: Fix detach call without attach
drm/framebuffer: Fix use of uninitialized variable
drm/drm_file: fix use of uninitialized variable
RDMA/IPoIB: Fix error code return in ipoib_mcast_join
fast_dput(): handle underflows gracefully
ASoC: doc: Fix undefined SND_SOC_DAPM_NOPM argument
f2fs: fix to check return value of f2fs_reserve_new_block()
wifi: cfg80211: free beacon_ies when overridden from hidden BSS
wifi: rtlwifi: rtl8723{be,ae}: using calculate_bit_shift()
wifi: rtl8xxxu: Add additional USB IDs for RTL8192EU devices
md: Whenassemble the array, consult the superblock of the freshest device
ARM: dts: imx23/28: Fix the DMA controller node name
ARM: dts: imx23-sansa: Use preferred i2c-gpios properties
ARM: dts: imx27-apf27dev: Fix LED name
ARM: dts: imx1: Fix sram node
ARM: dts: imx27: Fix sram node
ARM: dts: imx: Use flash@0,0 pattern
ARM: dts: imx25/27-eukrea: Fix RTC node name
ARM: dts: rockchip: fix rk3036 hdmi ports node
scsi: libfc: Fix up timeout error in fc_fcp_rec_error()
scsi: libfc: Don't schedule abort twice
bpf: Add map and need_defer parameters to .map_fd_put_ptr()
wifi: ath9k: Fix potential array-index-out-of-bounds read in ath9k_htc_txstatus()
ARM: dts: imx7s: Fix nand-controller #size-cells
ARM: dts: imx7s: Fix lcdif compatible
bonding: return -ENOMEM instead of BUG in alb_upper_dev_walk
PCI: Add no PM reset quirk for NVIDIA Spectrum devices
scsi: lpfc: Fix possible file string name overflow when updating firmware
ext4: avoid online resizing failures due to oversized flex bg
ext4: remove unnecessary check from alloc_flex_gd()
ext4: unify the type of flexbg_size to unsigned int
ext4: fix inconsistent between segment fstrim and full fstrim
SUNRPC: Fix a suspicious RCU usage warning
KVM: s390: fix setting of fpc register
s390/ptrace: handle setting of fpc register correctly
jfs: fix array-index-out-of-bounds in diNewExt
rxrpc_find_service_conn_rcu: fix the usage of read_seqbegin_or_lock()
afs: fix the usage of read_seqbegin_or_lock() in afs_find_server*()
crypto: stm32/crc32 - fix parsing list of devices
pstore/ram: Fix crash when setting number of cpus to an odd number
jfs: fix uaf in jfs_evict_inode
jfs: fix array-index-out-of-bounds in dbAdjTree
jfs: fix slab-out-of-bounds Read in dtSearch
UBSAN: array-index-out-of-bounds in dtSplitRoot
FS:JFS:UBSAN:array-index-out-of-bounds in dbAdjTree
ACPI: extlog: fix NULL pointer dereference check
PNP: ACPI: fix fortify warning
ACPI: video: Add quirk for the Colorful X15 AT 23 Laptop
audit: Send netlink ACK before setting connection in auditd_set
powerpc/lib: Validate size for vector operations
powerpc/mm: Fix build failures due to arch_reserved_kernel_pages()
powerpc: Fix build error due to is_valid_bugaddr()
powerpc/mm: Fix null-pointer dereference in pgtable_cache_add
net/sched: cbs: Fix not adding cbs instance to list
x86/entry/ia32: Ensure s32 is sign extended to s64
tick/sched: Preserve number of idle sleeps across CPU hotplug events
mips: Call lose_fpu(0) before initializing fcr31 in mips_set_personality_nan
gpio: eic-sprd: Clear interrupt after set the interrupt type
drm/exynos: gsc: minor fix for loop iteration in gsc_runtime_resume
drm/bridge: nxp-ptn3460: simplify some error checking
drm/bridge: nxp-ptn3460: fix i2c_master_send() error checking
drm: Don't unref the same fb many times by mistake due to deadlock handling
gpiolib: acpi: Ignore touchpad wakeup on GPD G1619-04
netfilter: nf_tables: reject QUEUE/DROP verdict parameters
btrfs: defrag: reject unknown flags of btrfs_ioctl_defrag_range_args
btrfs: don't warn if discard range is not aligned to sector
net: fec: fix the unhandled context fault from smmu
fjes: fix memleaks in fjes_hw_setup
netfilter: nf_tables: restrict anonymous set and map names to 16 bytes
net/mlx5e: fix a double-free in arfs_create_groups
net/mlx5: Use kfree(ft->g) in arfs_create_groups()
netlink: fix potential sleeping issue in mqueue_flush_file
Conflicts:
drivers/gpu/drm/mediatek/mtk_dsi.c (used ours)
kernel/time/timer.c
mm/memory-failure.c
Change-Id: I9b993a4082cf508287c664e1f8c709558d9cd903
Signed-off-by: bengris32 <bengris32@protonmail.ch>
[ Upstream commit 914f8b228ede709274b8c80514b352248ec9da00 ]
This adds a function to update a CGR with new parameters. qman_create_cgr
can almost be used for this (with flags=0), but it's not suitable because
it also registers the callback function. The _safe variant was modeled off
of qman_cgr_delete_safe. However, we handle multiple arguments and a return
value.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: fbec4e7fed89 ("soc: fsl: qbman: Use raw spinlock for cgr_lock")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89d29997f103d08264b0685796b420d911658b96 ]
eznps driver is supposed to be platform independent however it ends up
including stuff from inside arch/arc headers leading to rand config
build errors.
The quick hack to fix this (proper fix is too much chrun for non active
user-base) is to add following to nps platform agnostic header.
- copy AUX_IENABLE from arch/arc header
- move CTOP_AUX_IACK from arch/arc/plat-eznps/*/**
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lkml.kernel.org/r/20200824095831.5lpkmkafelnvlpi2@linutronix.de
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13136a47a061c01c91df78b37f7708dd5ce7035f ]
Implement support for the PMC_IMPL_E_33V_PWR register which replaces
PMC_PWR_DET register interface of the SoC generations preceding
Tegra186. Also add the voltage bit offsets to the tegra186_io_pads[]
table and the AO_HV pad.
Signed-off-by: Aapo Vienamo <avienamo@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
1. Add a sysfs file for setting camera max BW
2. Add BW throttle notifier add/remove function
3. Add a wait throttle done API
Change-Id: Id044a845f5cbfe2e6449643c0e05518f23110053
Feature: [Module]MM pipeline/MM DVFS
Signed-off-by: Anthony Huang <anthony.huang@mediatek.com>
CR-Id: ALPS04672494
After adding device_link between the iommu consumer and smi-larb,
the pm_runtime_get(_sync) of smi-larb and smi-common will be called
automatically. we can get rid of mtk_smi_larb_get/put.
CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
(am from https://lore.kernel.org/patchwork/patch/1028446/)
CR-Id: ALPS04383824
Change-Id: Iefc1baa92da49dfafc3a86fefacd41f3904c101a
The "mediatek,larb-id" has already been parsed in MTK IOMMU driver.
It's no need to parse it again in SMI driver. Only clean some codes.
This patch is fit for all the current mt2701, mt2712, mt7623, mt8173
and mt8183.
After this patch, the "mediatek,larb-id" only be needed for mt2712
which have 2 M4Us. In the other SoCs, we can get the larb-id from M4U
in which the larbs in the "mediatek,larbs" always are ordered.
Correspondingly, the larb_nr in the "struct mtk_smi_iommu" could also
be deleted.
CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
(am from https://lore.kernel.org/patchwork/patch/1043191/)
CR-Id: ALPS04383824
Change-Id: I25ce3f2d075f40f4278e7a50dca8ccee2c900319
Add a couple of new APIs to check the probing status of qman and bman:
'int bman_is_probed()' and 'int qman_is_probed()'.
They return the following values.
* 1 if qman/bman were probed correctly
* 0 if qman/bman were not yet probed
* -1 if probing of qman/bman failed
Drivers that use qman/bman driver services are required to use these
APIs before calling any functions exported by qman or bman drivers
or otherwise they will crash the kernel.
The APIs will be used in the following couple of qbman portal patches
and later in the series in the dpaa1 ethernet driver.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Various updates to soc/fsl for 4.19
Moves DPAA2 DPIO driver from staging to fsl/soc
Adds multiple-pin support to QE gpio driver
* tag 'soc-fsl-for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
soc: fsl: cleanup Kconfig menu
soc: fsl: dpio: Convert DPIO documentation to .rst
staging: fsl-mc: Remove remaining files
staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl
staging: fsl-dpaa2: eth: move generic FD defines to DPIO
soc: fsl: qe: gpio: Add qe_gpio_set_multiple
Signed-off-by: Olof Johansson <olof@lixom.net>
Move the NXP DPIO (Datapath I/O Driver) out of the
drivers/staging directory and into the drivers/soc/fsl directory.
The DPIO driver enables access to Queue and Buffer Manager (QBMAN)
hardware on NXP DPAA2 devices. This is a prerequisite to moving the
DPAA2 Ethernet driver out of staging.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Platform drivers need make a lot of resource state requests at the same
time, say, at the start or end of an usecase. It can be quite
inefficient to send each request separately. Instead they can give the
RPMH library a batch of requests to be sent and wait on the whole
transaction to be complete.
rpmh_write_batch() is a blocking call that can be used to send multiple
RPMH command sets. Each RPMH command set is set asynchronously and the
API blocks until all the command sets are complete and receive their
tx_done callbacks.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Platform drivers that want to send a request but do not want to block
until the RPMH request completes have now a new API -
rpmh_write_async().
The API allocates memory and send the requests and returns the control
back to the platform driver. The tx_done callback from the controller is
handled in the context of the controller's thread and frees the
allocated memory. This API allows RPMH requests from atomic contexts as
well.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Active state requests are sent immediately to the RSC controller, while
sleep and wake state requests are cached in this driver to avoid taxing
the RSC controller repeatedly. The cached values will be sent to the
controller when the rpmh_flush() is called.
Generally, flushing is a system PM activity and may be called from the
system PM drivers when the system is entering suspend or deeper sleep
modes during cpuidle.
Also allow invalidating the cached requests, so they may be re-populated
again.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
[rplsssn: remove unneeded semicolon, address line over 80chars error]
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Sending RPMH requests and waiting for response from the controller
through a callback is common functionality across all platform drivers.
To simplify drivers, add a library functions to create RPMH client and
send resource state requests.
rpmh_write() is a synchronous blocking call that can be used to send
active state requests.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add controller driver for QCOM SoCs that have hardware based shared
resource management. The hardware IP known as RSC (Resource State
Coordinator) houses multiple Direct Resource Voter (DRV) for different
execution levels. A DRV is a unique voter on the state of a shared
resource. A Trigger Control Set (TCS) is a bunch of slots that can house
multiple resource state requests, that when triggered will issue those
requests through an internal bus to the Resource Power Manager Hardened
(RPMH) blocks. These hardware blocks are capable of adjusting clocks,
voltages, etc. The resource state request from a DRV are aggregated
along with state requests from other processors in the SoC and the
aggregate value is applied on the resource.
Some important aspects of the RPMH communication -
- Requests are <addr, value> with some header information
- Multiple requests (upto 16) may be sent through a TCS, at a time
- Requests in a TCS are sent in sequence
- Requests may be fire-n-forget or completion (response expected)
- Multiple TCS from the same DRV may be triggered simultaneously
- Cannot send a request if another request for the same addr is in
progress from the same DRV
- When all the requests from a TCS are complete, an IRQ is raised
- The IRQ handler needs to clear the TCS before it is available for
reuse
- TCS configuration is specific to a DRV
- Platform drivers may use DRV from different RSCs to make requests
Resource state requests made when CPUs are active are called 'active'
state requests. Requests made when all the CPUs are powered down (idle
state) are called 'sleep' state requests. They are matched by a
corresponding 'wake' state requests which puts the resources back in to
previously requested active state before resuming any CPU. TCSes are
dedicated for each type of requests. Active mode TCSes (AMC) are used to
send requests immediately to the resource, while control TCS are used to
provide specific information to the controller. Sleep and Wake TCS send
sleep and wake requests, after and before the system halt respectively.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Recent Raspberry Pi firmware provides a mailbox property to detect
under-voltage conditions. Here is the current definition.
The u32 value returned by the firmware is divided into 2 parts:
- lower 16-bits are the live value
- upper 16-bits are the history or sticky value
Bits:
0: undervoltage
1: arm frequency capped
2: currently throttled
16: undervoltage has occurred
17: arm frequency capped has occurred
18: throttling has occurred
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Pull ARM SoC late updates from Olof Johansson:
"This is a branch with a few merge requests that either came in late,
or took a while longer for us to review and merge than usual and thus
cut it a bit close to the merge window. We stage them in a separate
branch and if things look good, we still send them up -- and that's
the case here.
This is mostly DT additions for Renesas platforms, adding IP block
descriptions for existing and new SoCs.
There are also some driver updates for Qualcomm platforms for SMEM/QMI
and GENI, which is their generalized serial protocol interface"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (186 commits)
soc: qcom: smem: introduce qcom_smem_virt_to_phys()
soc: qcom: qmi: fix a buffer sizing bug
MAINTAINERS: Update pattern for qcom_scm
soc: Unconditionally include qcom Makefile
soc: qcom: smem: check sooner in qcom_smem_set_global_partition()
soc: qcom: smem: fix qcom_smem_set_global_partition()
soc: qcom: smem: fix off-by-one error in qcom_smem_alloc_private()
soc: qcom: smem: byte swap values properly
soc: qcom: smem: return proper type for cached entry functions
soc: qcom: smem: fix first cache entry calculation
soc: qcom: cmd-db: Make endian-agnostic
drivers: qcom: add command DB driver
arm64: dts: renesas: salvator-common: Add ADV7482 support
ARM: dts: r8a7740: Add CEU1
ARM: dts: r8a7740: Add CEU0
arm64: dts: renesas: salvator-common: enable VIN
arm64: dts: renesas: r8a77970: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a77965: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a7796: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a7795-es1: add CSI-2 node
...
The tegra_cpuidle_pcie_irqs_in_use() function is stubbed out for non-ARM
builds, but now we can compile-test the Tegra pci driver on non-Tegra
ARM platforms as well, which results in a new link error:
drivers/pci/host/pci-tegra.o: In function `tegra_pcie_map_irq':
pci-tegra.c:(.text+0x288): undefined reference to `tegra_cpuidle_pcie_irqs_in_use'
drivers/pci/host/pci-tegra.o: In function `tegra_msi_map':
pci-tegra.c:(.text+0xba0): undefined reference to `tegra_cpuidle_pcie_irqs_in_use'
This adapts the #ifdef statement to match the exact condition under which
the function can be called.
Fixes: 51bc085d64 ("PCI: Improve host drivers compile test coverage")
Cc: Rob Herring <robh@kernel.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Command DB is a simple database in the shared memory of QCOM SoCs, that
provides information regarding shared resources. Some shared resources
in the SoC have properties that are probed dynamically at boot by the
remote processor. The information pertaining to the SoC and the platform
are made available in the shared memory. Drivers can query this
information using predefined strings.
Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
memory: tegra: Changes for v4.18-rc1
This contains some cleanup of the memory controller driver as well as
unification work to share more code between Tegra20 and later SoC
generations. Also included are an implementation for the hot resets
functionality by the memory controller which is required to properly
reset busy hardware.
* tag 'tegra-for-4.18-memory-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: memory: tegra: Remove Tegra114 SATA and AFI reset definitions
memory: tegra: Remove Tegra114 SATA and AFI reset definitions
memory: tegra: Register SMMU after MC driver became ready
memory: tegra: Add Tegra210 memory controller hot resets
memory: tegra: Add Tegra124 memory controller hot resets
memory: tegra: Add Tegra114 memory controller hot resets
memory: tegra: Add Tegra30 memory controller hot resets
memory: tegra: Add Tegra20 memory controller hot resets
memory: tegra: Introduce memory client hot reset
memory: tegra: Squash tegra20-mc into common tegra-mc driver
memory: tegra: Remove unused headers inclusions
memory: tegra: Apply interrupts mask per SoC
memory: tegra: Setup interrupts mask before requesting IRQ
memory: tegra: Do not handle spurious interrupts
dt-bindings: memory: tegra: Add hot resets definitions
Signed-off-by: Olof Johansson <olof@lixom.net>
In order to reset busy HW properly, memory controller needs to be
involved, otherwise it is possible to get corrupted memory or hang machine
if HW was reset during DMA. Introduce memory client 'hot reset' that will
be used for resetting of busy HW.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra30+ has some minor differences in registers / bits layout compared
to Tegra20. Let's squash Tegra20 driver into the common tegra-mc driver
in a preparation for the upcoming MC hot reset controls implementation,
avoiding code duplication.
Note that this currently doesn't report the value of MC_GART_ERROR_REQ
because it is located within the GART register area and cannot be safely
accessed from the MC driver (this happens to work only by accident). The
proper solution is to integrate the GART driver with the MC driver, much
like is done for the Tegra SMMU, but that is an invasive change and will
be part of a separate patch series.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Currently we are enabling handling of interrupts specific to Tegra124+
which happen to overlap with previous generations. Let's specify
interrupts mask per SoC generation for consistency and in a preparation
of squashing of Tegra20 driver into the common one that will enable
handling of GART faults which may be undesirable by newer generations.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
If CONFIG_RASPBERRYPI_FIRMWARE=n:
drivers/gpio/gpio-raspberrypi-exp.c: In function ‘rpi_exp_gpio_get_polarity’:
drivers/gpio/gpio-raspberrypi-exp.c:71: warning: ‘get.polarity’ is used uninitialized in this function
drivers/gpio/gpio-raspberrypi-exp.c: In function ‘rpi_exp_gpio_get_direction’:
drivers/gpio/gpio-raspberrypi-exp.c:150: warning: ‘get.direction’ is used uninitialized in this function
The dummy firmware interface functions return 0, which means success,
causing subsequent code to make use of the never initialized output
parameter.
Fix this by making the dummy functions return an error code (-ENOSYS)
instead.
Note that this assumes the firmware always fills in the requested data
in the CONFIG_RASPBERRYPI_FIRMWARE=y case.
Fixes: d45f1a563b ("staging: vc04_services: fix up rpi firmware functions")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Pull ARM SoC driver updates from Arnd Bergmann:
"The main addition this time around is the new ARM "SCMI" framework,
which is the latest in a series of standards coming from ARM to do
power management in a platform independent way.
This has been through many review cycles, and it relies on a rather
interesting way of using the mailbox subsystem, but in the end I
agreed that Sudeep's version was the best we could do after all.
Other changes include:
- the ARM CCN driver is moved out of drivers/bus into drivers/perf,
which makes more sense. Similarly, the performance monitoring
portion of the CCI driver are moved the same way and cleaned up a
little more.
- a series of updates to the SCPI framework
- support for the Mediatek mt7623a SoC in drivers/soc
- support for additional NVIDIA Tegra hardware in drivers/soc
- a new reset driver for Socionext Uniphier
- lesser bug fixes in drivers/soc, drivers/tee, drivers/memory, and
drivers/firmware and drivers/reset across platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (87 commits)
reset: uniphier: add ethernet reset control support for PXs3
reset: stm32mp1: Enable stm32mp1 reset driver
dt-bindings: reset: add STM32MP1 resets
reset: uniphier: add Pro4/Pro5/PXs2 audio systems reset control
reset: imx7: add 'depends on HAS_IOMEM' to fix unmet dependency
reset: modify the way reset lookup works for board files
reset: add support for non-DT systems
clk: scmi: use devm_of_clk_add_hw_provider() API and drop scmi_clocks_remove
firmware: arm_scmi: prevent accessing rate_discrete uninitialized
hwmon: (scmi) return -EINVAL when sensor information is unavailable
amlogic: meson-gx-socinfo: Update soc ids
soc/tegra: pmc: Use the new reset APIs to manage reset controllers
soc: mediatek: update power domain data of MT2712
dt-bindings: soc: update MT2712 power dt-bindings
cpufreq: scmi: add thermal dependency
soc: mediatek: fix the mistaken pointer accessed when subdomains are added
soc: mediatek: add SCPSYS power domain driver for MediaTek MT7623A SoC
soc: mediatek: avoid hardcoded value with bus_prot_mask
dt-bindings: soc: add header files required for MT7623A SCPSYS dt-binding
dt-bindings: soc: add SCPSYS binding for MT7623 and MT7623A SoC
...
Pull "firmware: Changes for v4.17-rc1" from Thierry Reding:
These changes are rather small, with just a fix for a return value check
and some preparatory work for Tegra194 BPMP support.
* tag 'tegra-for-4.17-firmware' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: adjust tested variable
firmware: tegra: Simplify channel management
Linux 4.16-rc5 merged into the GPIO devel branch to resolve
a nasty conflict between fixes and devel in the RCAR driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Tegra194 BPMP only implements 5 channels (4 to BPMP, 1 to CCPLEX),
and they are not placed contiguously in memory. The current channel
management in the BPMP driver does not support this.
Simplify and refactor the channel management such that only one atomic
transmit channel and one receive channel are supported, and channels
are not required to be placed contiguously in memory. The same
configuration also works on T186 so we end up with less code.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Pull ARC fixes from Vineet Gupta:
- MCIP aka ARconnect fixes for SMP builds [Euginey]
- preventive fix for SLC (L2 cache) flushing [Euginey]
- Kconfig default fix [Ulf Magnusson]
- trailing semicolon fixes [Luis de Bethencourt]
- other assorted minor fixes
* tag 'arc-4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: setup cpu possible mask according to possible-cpus dts property
ARC: mcip: update MCIP debug mask when the new cpu came online
ARC: mcip: halt GFRC counter when ARC cores halt
ARCv2: boot log: fix HS48 release number
arc: dts: use 'atmel' as manufacturer for at24 in axs10x_mb
ARC: Fix malformed ARC_EMUL_UNALIGNED default
ARC: boot log: Fix trailing semicolon
ARC: dw2 unwind: Fix trailing semicolon
ARC: Enable fatal signals on boot for dev platforms
ARCv2: Don't pretend we may set L-bit in STATUS32 with kflag instruction
ARCv2: cache: fix slc_entire_op: flush only instead of flush-n-inv
As of today we use hardcoded MCIP debug mask, so if we launch
kernel via debugger and kick fever cores than HW has all cpus
hang at the momemt of setup MCIP debug mask.
So update MCIP debug mask when the new cpu came online, instead of
use hardcoded MCIP debug mask.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
In SMP systems, GFRC is used for clocksource. However by default the
counter keeps running even when core is halted (say when debugging via a
JTAG debugger). This confuses Linux timekeeping and triggers flase RCU stall
splat such as below:
| [ARCLinux]# while true; do ./shm_open_23-1.run-test ; done
| Running with 1000 processes for 1000 objects
| hrtimer: interrupt took 485060 ns
|
| create_cnt: 1000
| Running with 1000 processes for 1000 objects
| [ARCLinux]# INFO: rcu_preempt self-detected stall on CPU
| 2-...: (1 GPs behind) idle=a01/1/0 softirq=135770/135773 fqs=0
| INFO: rcu_preempt detected stalls on CPUs/tasks:
| 0-...: (1 GPs behind) idle=71e/0/0 softirq=135264/135264 fqs=0
| 2-...: (1 GPs behind) idle=a01/1/0 softirq=135770/135773 fqs=0
| 3-...: (1 GPs behind) idle=4e0/0/0 softirq=134304/134304 fqs=0
| (detected by 1, t=13648 jiffies, g=31493, c=31492, q=1)
Starting from ARC HS v3.0 it's possible to tie GFRC to state of up-to 4
ARC cores with help of GFRC's CORE register where we set a mask for
cores which state we need to rely on.
We update cpu mask every time new cpu came online instead of using
hardcoded one or using mask generated from "possible_cpus" as we
want it set correctly even if we run kernel on HW which has fewer cores
than expected (or we launch kernel via debugger and kick fever cores
than HW has)
Note that GFRC halts when all cores have halted and thus relies on
programming of Inter-Core-dEbug register to halt all cores when one
halts.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[vgupta: rewrote changelog]
Add latest firmware property tags from the latest Raspberry Pi downstream
kernel. This is needed for the GPIO tags, so we can control the GPIO
multiplexor lines.
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Pull ARM SoC driver updates from Arnd Bergmann:
"A number of new drivers get added this time, along with many
low-priority bugfixes. The most interesting changes by subsystem are:
bus drivers:
- Updates to the Broadcom bus interface driver to support newer SoC
types
- The TI OMAP sysc driver now supports updated DT bindings
memory controllers:
- A new driver for Tegra186 gets added
- A new driver for the ti-emif sram, to allow relocating
suspend/resume handlers there
SoC specific:
- A new driver for Qualcomm QMI, the interface to the modem on MSM
SoCs
- A new driver for power domains on the actions S700 SoC
- A driver for the Xilinx Zynq VCU logicoreIP
reset controllers:
- A new driver for Amlogic Meson-AGX
- various bug fixes
tee subsystem:
- A new user interface got added to enable asynchronous communication
with the TEE supplicant.
- A new method of using user space memory for communication with the
TEE is added"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (84 commits)
of: platform: fix OF node refcount leak
soc: fsl: guts: Add a NULL check for devm_kasprintf()
bus: ti-sysc: Fix smartreflex sysc mask
psci: add CPU_IDLE dependency
soc: xilinx: Fix Kconfig alignment
soc: xilinx: xlnx_vcu: Use bitwise & rather than logical && on clkoutdiv
soc: xilinx: xlnx_vcu: Depends on HAS_IOMEM for xlnx_vcu
soc: bcm: brcmstb: Be multi-platform compatible
soc: brcmstb: biuctrl: exit without warning on non brcmstb platforms
Revert "soc: brcmstb: Only register SoC device on STB platforms"
bus: omap: add MODULE_LICENSE tags
soc: brcmstb: Only register SoC device on STB platforms
tee: shm: Potential NULL dereference calling tee_shm_register()
soc: xilinx: xlnx_vcu: Add Xilinx ZYNQMP VCU logicoreIP init driver
dt-bindings: soc: xilinx: Add DT bindings to xlnx_vcu driver
soc: xilinx: Create folder structure for soc specific drivers
of: platform: populate /firmware/ node from of_platform_default_populate_init()
soc: samsung: Add SPDX license identifiers
soc: qcom: smp2p: Use common error handling code in qcom_smp2p_probe()
tee: shm: don't put_page on null shm->pages
...
Create SMMU display groups for Tegra30, Tegra114, Tegra124 and Tegra210.
This allows the display controllers on these devices to share the same
IOMMU domain using the standard IOMMU group mechanism.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Move Tegra186 support to the consolidated PMC driver to reduce some of
the duplication and also gain I/O pad functionality on the new SoC as a
side-effect.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Pull clk updates from Stephen Boyd:
"We have two changes to the core framework this time around.
The first being a large change that introduces runtime PM support to
the clk framework. Now we properly call runtime PM operations on the
device providing a clk when the clk is in use. This helps on SoCs
where the clks provided by a device need something to be powered on
before using the clks, like power domains or regulators. It also helps
power those things down when clks aren't in use.
The other core change is a devm API addition for clk providers so we
can get rid of a bunch of clk driver remove functions that are just
doing of_clk_del_provider().
Outside of the core, we have the usual addition of clk drivers and
smattering of non-critical fixes to existing drivers. The biggest diff
is support for Mediatek MT2712 and MT7622 SoCs, but those patches
really just add a bunch of data.
By the way, we're trying something new here where we build the tree up
with topic branches. We plan to work this into our workflow so that we
don't step on each other's toes, and so the fixes branch can be merged
on an as-needed basis.
Summary:
Core:
- runtime PM support for clk providers
- devm API for of_clk_add_hw_provider()
New Drivers:
- Mediatek MT2712 and MT7622
- Renesas R-Car V3M SoC
Updates:
- runtime PM support for Samsung exynos5433/exynos4412 providers
- removal of clkdev aliases on Samsung SoCs
- convert clk-gpio to use gpio descriptors
- various driver cleanups to match kernel coding style
- Amlogic Video Processing Unit VPU and VAPB clks
- sigma-delta modulation for Allwinner audio PLLs
- Allwinner A83t Display clks
- support for the second display unit clock on Renesas RZ/G1E
- suspend/resume support for Renesas R-Car Gen3 CPG/MSSR
- new clock ids for Rockchip rk3188 and rk3368 SoCs
- various 'const' markings on clk_ops structures
- RPM clk support on Qualcomm MSM8996/MSM8660 SoCs"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits)
clk: stm32h7: fix test of clock config
clk: pxa: fix building on older compilers
clk: sunxi-ng: a83t: Fix i2c buses bits
clk: ti: dra7-atl-clock: fix child-node lookups
clk: qcom: common: fix legacy board-clock registration
clk: uniphier: fix DAPLL2 clock rate of Pro5
clk: uniphier: fix parent of miodmac clock data
clk: hi3798cv200: correct parent mux clock for 'clk_sdio0_ciu'
clk: hisilicon: Delete an error message for a failed memory allocation in hisi_register_clkgate_sep()
clk: hi3660: fix incorrect uart3 clock freqency
clk: kona-setup: Delete error messages for failed memory allocations
ARC: clk: fix spelling mistake: "configurarion" -> "configuration"
clk: cdce925: remove redundant check for non-null parent_name
clk: versatile: Improve sizeof() usage
clk: versatile: Delete error messages for failed memory allocations
clk: ux500: Improve sizeof() usage
clk: ux500: Delete error messages for failed memory allocations
clk: spear: Delete error messages for failed memory allocations
clk: ti: Delete error messages for failed memory allocations
clk: mmp: Adjust checks for NULL pointers
...
By default, it is assumed that the UTMI clock is generated from a 12 MHz
reference clock (MAINCK). If it's not the case, the FREQ field of the
SFR_UTMICKTRIM has to be updated to generate the UTMI clock in the
proper way.
The UTMI clock has a fixed rate of 480 MHz. In fact, there is no
multiplier we can configure. The multiplier is managed internally,
depending on the reference clock frequency, to achieve the target of
480 MHz.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Ingo van Lil <inguin@gmx.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Tegra power management firmware running on the co-processor (BPMP)
implements a simple pseudo file system akin to debugfs. The file
system can be used for debugging purposes to examine and change the
status of selected resources controlled by the firmware (such as
clocks, resets, voltages, powergates, ...).
Add support to "mirror" the firmware's file system to debugfs. At
boot, query firmware for a list of all possible files and create
corresponding debugfs entries. Read/write of individual files is
implemented by sending a Message ReQuest (MRQ) that passes the full
file path name and data to firmware via DRAM.
Signed-off-by: Timo Alho <talho@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add static inline stubs to bpmp.h when CONFIG_BPMP is not enabled.
This allows building BPMP-related drivers with COMPILE_TEST.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>