Evolution-X-Devices/kernel_xiaomi_raphael
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge 4.14.110 into android-4.14

Browse Source 
Changes in 4.14.110
	Bluetooth: Check L2CAP option sizes returned from l2cap_get_conf_opt
	Bluetooth: Verify that l2cap_get_conf_opt provides large enough buffer
	video: fbdev: Set pixclock = 0 in goldfishfb
	stmmac: copy unicast mac address to MAC registers
	dccp: do not use ipv6 header for ipv4 flow
	genetlink: Fix a memory leak on error path
	mISDN: hfcpci: Test both vendor & device ID for Digium HFC4S
	net: datagram: fix unbounded loop in __skb_try_recv_datagram()
	net/packet: Set __GFP_NOWARN upon allocation in alloc_pg_vec
	net: rose: fix a possible stack overflow
	net: stmmac: fix memory corruption with large MTUs
	net-sysfs: call dev_hold if kobject_init_and_add success
	packets: Always register packet sk in the same order
	rhashtable: Still do rehash when we get EEXIST
	tcp: do not use ipv6 header for ipv4 flow
	thunderx: enable page recycling for non-XDP case
	thunderx: eliminate extra calls to put_page() for pages held for recycling
	vxlan: Don't call gro_cells_destroy() before device is unregistered
	sctp: get sctphdr by offset in sctp_compute_cksum
	net: aquantia: fix rx checksum offload for UDP/TCP over IPv6
	mac8390: Fix mmio access size probe
	tun: properly test for IFF_UP
	tun: add a missing rcu_read_unlock() in error path
	powerpc/64s: Add support for ori barrier_nospec patching
	powerpc/64s: Patch barrier_nospec in modules
	powerpc/64s: Enable barrier_nospec based on firmware settings
	powerpc: Use barrier_nospec in copy_from_user()
	powerpc/64: Use barrier_nospec in syscall entry
	powerpc/64s: Enhance the information in cpu_show_spectre_v1()
	powerpc64s: Show ori31 availability in spectre_v1 sysfs file not v2
	powerpc/64: Disable the speculation barrier from the command line
	powerpc/64: Make stf barrier PPC_BOOK3S_64 specific.
	powerpc/64: Add CONFIG_PPC_BARRIER_NOSPEC
	powerpc/64: Call setup_barrier_nospec() from setup_arch()
	powerpc/64: Make meltdown reporting Book3S 64 specific
	powerpc/fsl: Add barrier_nospec implementation for NXP PowerPC Book3E
	powerpc/fsl: Sanitize the syscall table for NXP PowerPC 32 bit platforms
	powerpc/asm: Add a patch_site macro & helpers for patching instructions
	powerpc/64s: Add new security feature flags for count cache flush
	powerpc/64s: Add support for software count cache flush
	powerpc/pseries: Query hypervisor for count cache flush settings
	powerpc/powernv: Query firmware for count cache flush settings
	powerpc/fsl: Add infrastructure to fixup branch predictor flush
	powerpc/fsl: Add macro to flush the branch predictor
	powerpc/fsl: Fix spectre_v2 mitigations reporting
	powerpc/fsl: Emulate SPRN_BUCSR register
	powerpc/fsl: Add nospectre_v2 command line argument
	powerpc/fsl: Flush the branch predictor at each kernel entry (64bit)
	powerpc/fsl: Flush the branch predictor at each kernel entry (32 bit)
	powerpc/fsl: Flush branch predictor when entering KVM
	powerpc/fsl: Enable runtime patching if nospectre_v2 boot arg is used
	powerpc/fsl: Update Spectre v2 reporting
	powerpc/fsl: Fixed warning: orphan section `__btb_flush_fixup'
	powerpc/fsl: Fix the flush of branch predictor.
	powerpc/security: Fix spectre_v2 reporting
	Btrfs: fix incorrect file size after shrinking truncate and fsync
	btrfs: remove WARN_ON in log_dir_items
	btrfs: raid56: properly unmap parity page in finish_parity_scrub()
	ARM: imx6q: cpuidle: fix bug that CPU might not wake up at expected time
	powerpc: bpf: Fix generation of load/store DW instructions
	NFSv4.1 don't free interrupted slot on open
	net: dsa: qca8k: remove leftover phy accessors
	ALSA: rawmidi: Fix potential Spectre v1 vulnerability
	ALSA: seq: oss: Fix Spectre v1 vulnerability
	ALSA: pcm: Fix possible OOB access in PCM oss plugins
	ALSA: pcm: Don't suspend stream in unrecoverable PCM state
	ALSA: hda/realtek - Add support headset mode for DELL WYSE AIO
	ALSA: hda/realtek - Add support headset mode for New DELL WYSE NB
	kbuild: modversions: Fix relative CRC byte order interpretation
	fs/open.c: allow opening only regular files during execve()
	ocfs2: fix inode bh swapping mixup in ocfs2_reflink_inodes_lock
	scsi: sd: Fix a race between closing an sd device and sd I/O
	scsi: sd: Quiesce warning if device does not report optimal I/O size
	scsi: zfcp: fix rport unblock if deleted SCSI devices on Scsi_Host
	scsi: zfcp: fix scsi_eh host reset with port_forced ERP for non-NPIV FCP devices
	tty: atmel_serial: fix a potential NULL pointer dereference
	staging: comedi: ni_mio_common: Fix divide-by-zero for DIO cmdtest
	staging: vt6655: Remove vif check from vnt_interrupt
	staging: vt6655: Fix interrupt race condition on device start up.
	serial: max310x: Fix to avoid potential NULL pointer dereference
	serial: sh-sci: Fix setting SCSCR_TIE while transferring data
	USB: serial: cp210x: add new device id
	USB: serial: ftdi_sio: add additional NovaTech products
	USB: serial: mos7720: fix mos_parport refcount imbalance on error path
	USB: serial: option: set driver_info for SIM5218 and compatibles
	USB: serial: option: add support for Quectel EM12
	USB: serial: option: add Olicard 600
	Disable kgdboc failed by echo space to /sys/module/kgdboc/parameters/kgdboc
	fs/proc/proc_sysctl.c: fix NULL pointer dereference in put_links
	drm/vgem: fix use-after-free when drm_gem_handle_create() fails
	gpio: exar: add a check for the return value of ida_simple_get fails
	gpio: adnp: Fix testing wrong value in adnp_gpio_direction_input
	phy: sun4i-usb: Support set_mode to USB_HOST for non-OTG PHYs
	usb: mtu3: fix EXTCON dependency
	USB: gadget: f_hid: fix deadlock in f_hidg_write()
	usb: common: Consider only available nodes for dr_mode
	usb: host: xhci-rcar: Add XHCI_TRUST_TX_LENGTH quirk
	xhci: Fix port resume done detection for SS ports with LPM enabled
	usb: cdc-acm: fix race during wakeup blocking TX traffic
	mm/migrate.c: add missing flush_dcache_page for non-mapped page migrate
	perf intel-pt: Fix TSC slip
	cpu/hotplug: Prevent crash when CPU bringup fails on CONFIG_HOTPLUG_CPU=n
	x86/smp: Enforce CONFIG_HOTPLUG_CPU when SMP=y
	KVM: Reject device ioctls from processes other than the VM's creator
	KVM: x86: Emulate MSR_IA32_ARCH_CAPABILITIES on AMD hosts
	Revert "USB: core: only clean up what we allocated"
	vfio: ccw: only free cp on final interrupt
	Linux 4.14.110

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This commit is contained in:
Greg Kroah-Hartman
2019-04-03 06:59:26 +02:00
parent 140cda105b 80bf6c64d5
commit 588c629944
105 changed files with 1154 additions and 319 deletions
Download Patch File Download Diff File Expand all files Collapse all files

16
Documentation/virtual/kvm/api.txt
View File

@@ -13,7 +13,7 @@ of a virtual machine. The ioctls belong to three classes
- VM ioctls: These query and set attributes that affect an entire virtual
machine, for example memory layout. In addition a VM ioctl is used to
create virtual cpus (vcpus).
create virtual cpus (vcpus) and devices.
Only run VM ioctls from the same process (address space) that was used
to create the VM.
@@ -24,6 +24,11 @@ of a virtual machine. The ioctls belong to three classes
Only run vcpu ioctls from the same thread that was used to create the
vcpu.
- device ioctls: These query and set attributes that control the operation
of a single device.
device ioctls must be issued from the same process (address space) that
was used to create the VM.
2. File descriptors
-------------------
@@ -32,10 +37,11 @@ The kvm API is centered around file descriptors. An initial
open("/dev/kvm") obtains a handle to the kvm subsystem; this handle
can be used to issue system ioctls. A KVM_CREATE_VM ioctl on this
handle will create a VM file descriptor which can be used to issue VM
ioctls. A KVM_CREATE_VCPU ioctl on a VM fd will create a virtual cpu
and return a file descriptor pointing to it. Finally, ioctls on a vcpu
fd can be used to control the vcpu, including the important task of
actually running guest code.
ioctls. A KVM_CREATE_VCPU or KVM_CREATE_DEVICE ioctl on a VM fd will
create a virtual cpu or device and return a file descriptor pointing to
the new resource. Finally, ioctls on a vcpu or device fd can be used
to control the vcpu or device. For vcpus, this includes the important
task of actually running guest code.
In general file descriptors can be migrated among processes by means
of fork() and the SCM_RIGHTS facility of unix domain socket. These

2
Makefile
View File

@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
VERSION = 4
PATCHLEVEL = 14
SUBLEVEL = 109
SUBLEVEL = 110
EXTRAVERSION =
NAME = Petit Gorille

27
arch/arm/mach-imx/cpuidle-imx6q.c
View File

@@ -16,30 +16,23 @@
#include "cpuidle.h"
#include "hardware.h"
static atomic_t master = ATOMIC_INIT(0);
static DEFINE_SPINLOCK(master_lock);
static int num_idle_cpus = 0;
static DEFINE_SPINLOCK(cpuidle_lock);
static int imx6q_enter_wait(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index)
{
if (atomic_inc_return(&master) == num_online_cpus()) {
/*
* With this lock, we prevent other cpu to exit and enter
* this function again and become the master.
*/
if (!spin_trylock(&master_lock))
goto idle;
spin_lock(&cpuidle_lock);
if (++num_idle_cpus == num_online_cpus())
imx6_set_lpm(WAIT_UNCLOCKED);
cpu_do_idle();
imx6_set_lpm(WAIT_CLOCKED);
spin_unlock(&master_lock);
goto done;
}
spin_unlock(&cpuidle_lock);
idle:
cpu_do_idle();
done:
atomic_dec(&master);
spin_lock(&cpuidle_lock);
if (num_idle_cpus-- == num_online_cpus())
imx6_set_lpm(WAIT_CLOCKED);
spin_unlock(&cpuidle_lock);
return index;
}

7
arch/powerpc/Kconfig
View File

@@ -164,7 +164,7 @@ config PPC
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
select GENERIC_CMOS_UPDATE
select GENERIC_CPU_AUTOPROBE
select GENERIC_CPU_VULNERABILITIES if PPC_BOOK3S_64
select GENERIC_CPU_VULNERABILITIES if PPC_BARRIER_NOSPEC
select GENERIC_IRQ_SHOW
select GENERIC_IRQ_SHOW_LEVEL
select GENERIC_SMP_IDLE_THREAD
@@ -236,6 +236,11 @@ config PPC
# Please keep this list sorted alphabetically.
#
config PPC_BARRIER_NOSPEC
bool
default y
depends on PPC_BOOK3S_64 || PPC_FSL_BOOK3E
config GENERIC_CSUM
def_bool n

6
arch/powerpc/include/asm/asm-prototypes.h
View File

@@ -126,4 +126,10 @@ extern int __ucmpdi2(u64, u64);
void _mcount(void);
unsigned long prepare_ftrace_return(unsigned long parent, unsigned long ip);
/* Patch sites */
extern s32 patch__call_flush_count_cache;
extern s32 patch__flush_count_cache_return;
extern long flush_count_cache;
#endif /* _ASM_POWERPC_ASM_PROTOTYPES_H */

12
arch/powerpc/include/asm/barrier.h
View File

@@ -77,19 +77,25 @@ do { \
})
#ifdef CONFIG_PPC_BOOK3S_64
#define NOSPEC_BARRIER_SLOT nop
#elif defined(CONFIG_PPC_FSL_BOOK3E)
#define NOSPEC_BARRIER_SLOT nop; nop
#endif
#ifdef CONFIG_PPC_BARRIER_NOSPEC
/*
* Prevent execution of subsequent instructions until preceding branches have
* been fully resolved and are no longer executing speculatively.
*/
#define barrier_nospec_asm ori 31,31,0
#define barrier_nospec_asm NOSPEC_BARRIER_FIXUP_SECTION; NOSPEC_BARRIER_SLOT
// This also acts as a compiler barrier due to the memory clobber.
#define barrier_nospec() asm (stringify_in_c(barrier_nospec_asm) ::: "memory")
#else /* !CONFIG_PPC_BOOK3S_64 */
#else /* !CONFIG_PPC_BARRIER_NOSPEC */
#define barrier_nospec_asm
#define barrier_nospec()
#endif
#endif /* CONFIG_PPC_BARRIER_NOSPEC */
#include <asm-generic/barrier.h>

18
arch/powerpc/include/asm/code-patching-asm.h Normal file
View File

@@ -0,0 +1,18 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2018, Michael Ellerman, IBM Corporation.
*/
#ifndef _ASM_POWERPC_CODE_PATCHING_ASM_H
#define _ASM_POWERPC_CODE_PATCHING_ASM_H
/* Define a "site" that can be patched */
.macro patch_site label name
.pushsection ".rodata"
.balign 4
.global \name
\name:
.4byte \label - .
.popsection
.endm
#endif /* _ASM_POWERPC_CODE_PATCHING_ASM_H */

2
arch/powerpc/include/asm/code-patching.h
View File

@@ -32,6 +32,8 @@ unsigned int create_cond_branch(const unsigned int *addr,
int patch_branch(unsigned int *addr, unsigned long target, int flags);
int patch_instruction(unsigned int *addr, unsigned int instr);
int raw_patch_instruction(unsigned int *addr, unsigned int instr);
int patch_instruction_site(s32 *addr, unsigned int instr);
int patch_branch_site(s32 *site, unsigned long target, int flags);
int instr_is_relative_branch(unsigned int instr);
int instr_is_relative_link_branch(unsigned int instr);

21
arch/powerpc/include/asm/feature-fixups.h
View File

@@ -211,6 +211,25 @@ label##3: \
FTR_ENTRY_OFFSET 951b-952b; \
.popsection;
#define NOSPEC_BARRIER_FIXUP_SECTION \
953: \
.pushsection __barrier_nospec_fixup,"a"; \
.align 2; \
954: \
FTR_ENTRY_OFFSET 953b-954b; \
.popsection;
#define START_BTB_FLUSH_SECTION \
955: \
#define END_BTB_FLUSH_SECTION \
956: \
.pushsection __btb_flush_fixup,"a"; \
.align 2; \
957: \
FTR_ENTRY_OFFSET 955b-957b; \
FTR_ENTRY_OFFSET 956b-957b; \
.popsection;
#ifndef __ASSEMBLY__
#include <linux/types.h>
@@ -219,6 +238,8 @@ extern long stf_barrier_fallback;
extern long __start___stf_entry_barrier_fixup, __stop___stf_entry_barrier_fixup;
extern long __start___stf_exit_barrier_fixup, __stop___stf_exit_barrier_fixup;
extern long __start___rfi_flush_fixup, __stop___rfi_flush_fixup;
extern long __start___barrier_nospec_fixup, __stop___barrier_nospec_fixup;
extern long __start__btb_flush_fixup, __stop__btb_flush_fixup;
void apply_feature_fixups(void);
void setup_feature_keys(void);

2
arch/powerpc/include/asm/hvcall.h
View File

@@ -340,10 +340,12 @@
#define H_CPU_CHAR_BRANCH_HINTS_HONORED (1ull << 58) // IBM bit 5
#define H_CPU_CHAR_THREAD_RECONFIG_CTRL (1ull << 57) // IBM bit 6
#define H_CPU_CHAR_COUNT_CACHE_DISABLED (1ull << 56) // IBM bit 7
#define H_CPU_CHAR_BCCTR_FLUSH_ASSIST (1ull << 54) // IBM bit 9
#define H_CPU_BEHAV_FAVOUR_SECURITY (1ull << 63) // IBM bit 0
#define H_CPU_BEHAV_L1D_FLUSH_PR (1ull << 62) // IBM bit 1
#define H_CPU_BEHAV_BNDS_CHK_SPEC_BAR (1ull << 61) // IBM bit 2
#define H_CPU_BEHAV_FLUSH_COUNT_CACHE (1ull << 58) // IBM bit 5
/* Flag values used in H_REGISTER_PROC_TBL hcall */
#define PROC_TABLE_OP_MASK 0x18

2
arch/powerpc/include/asm/ppc-opcode.h
View File

@@ -288,6 +288,7 @@
/* Misc instructions for BPF compiler */
#define PPC_INST_LBZ 0x88000000
#define PPC_INST_LD 0xe8000000
#define PPC_INST_LDX 0x7c00002a
#define PPC_INST_LHZ 0xa0000000
#define PPC_INST_LWZ 0x80000000
#define PPC_INST_LHBRX 0x7c00062c
@@ -295,6 +296,7 @@
#define PPC_INST_STB 0x98000000
#define PPC_INST_STH 0xb0000000
#define PPC_INST_STD 0xf8000000
#define PPC_INST_STDX 0x7c00012a
#define PPC_INST_STDU 0xf8000001
#define PPC_INST_STW 0x90000000
#define PPC_INST_STWU 0x94000000

10
arch/powerpc/include/asm/ppc_asm.h
View File

@@ -802,4 +802,14 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601)
stringify_in_c(.long (_target) - . ;) \
stringify_in_c(.previous)
#ifdef CONFIG_PPC_FSL_BOOK3E
#define BTB_FLUSH(reg) \
lis reg,BUCSR_INIT@h; \
ori reg,reg,BUCSR_INIT@l; \
mtspr SPRN_BUCSR,reg; \
isync;
#else
#define BTB_FLUSH(reg)
#endif /* CONFIG_PPC_FSL_BOOK3E */
#endif /* _ASM_POWERPC_PPC_ASM_H */

7
arch/powerpc/include/asm/security_features.h
View File

@@ -22,6 +22,7 @@ enum stf_barrier_type {
void setup_stf_barrier(void);
void do_stf_barrier_fixups(enum stf_barrier_type types);
void setup_count_cache_flush(void);
static inline void security_ftr_set(unsigned long feature)
{
@@ -59,6 +60,9 @@ static inline bool security_ftr_enabled(unsigned long feature)
// Indirect branch prediction cache disabled
#define SEC_FTR_COUNT_CACHE_DISABLED 0x0000000000000020ull
// bcctr 2,0,0 triggers a hardware assisted count cache flush
#define SEC_FTR_BCCTR_FLUSH_ASSIST 0x0000000000000800ull
// Features indicating need for Spectre/Meltdown mitigations
@@ -74,6 +78,9 @@ static inline bool security_ftr_enabled(unsigned long feature)
// Firmware configuration indicates user favours security over performance
#define SEC_FTR_FAVOUR_SECURITY 0x0000000000000200ull
// Software required to flush count cache on context switch
#define SEC_FTR_FLUSH_COUNT_CACHE 0x0000000000000400ull
// Features enabled by default
#define SEC_FTR_DEFAULT \

20
arch/powerpc/include/asm/setup.h
View File

@@ -52,6 +52,26 @@ enum l1d_flush_type {
void setup_rfi_flush(enum l1d_flush_type, bool enable);
void do_rfi_flush_fixups(enum l1d_flush_type types);
#ifdef CONFIG_PPC_BARRIER_NOSPEC
void setup_barrier_nospec(void);
#else
static inline void setup_barrier_nospec(void) { };
#endif
void do_barrier_nospec_fixups(bool enable);
extern bool barrier_nospec_enabled;
#ifdef CONFIG_PPC_BARRIER_NOSPEC
void do_barrier_nospec_fixups_range(bool enable, void *start, void *end);
#else
static inline void do_barrier_nospec_fixups_range(bool enable, void *start, void *end) { };
#endif
#ifdef CONFIG_PPC_FSL_BOOK3E
void setup_spectre_v2(void);
#else
static inline void setup_spectre_v2(void) {};
#endif
void do_btb_flush_fixups(void);
#endif /* !__ASSEMBLY__ */

11
arch/powerpc/include/asm/uaccess.h
View File

@@ -238,6 +238,7 @@ do { \
__chk_user_ptr(ptr); \
if (!is_kernel_addr((unsigned long)__gu_addr)) \
might_fault(); \
barrier_nospec(); \
__get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
(x) = (__typeof__(*(ptr)))__gu_val; \
__gu_err; \
@@ -249,8 +250,10 @@ do { \
__long_type(*(ptr)) __gu_val = 0; \
const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
might_fault(); \
if (access_ok(VERIFY_READ, __gu_addr, (size))) \
if (access_ok(VERIFY_READ, __gu_addr, (size))) { \
barrier_nospec(); \
__get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
} \
(x) = (__force __typeof__(*(ptr)))__gu_val; \
__gu_err; \
})
@@ -261,6 +264,7 @@ do { \
__long_type(*(ptr)) __gu_val; \
const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
__chk_user_ptr(ptr); \
barrier_nospec(); \
__get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
(x) = (__force __typeof__(*(ptr)))__gu_val; \
__gu_err; \
@@ -288,15 +292,19 @@ static inline unsigned long raw_copy_from_user(void *to,
switch (n) {
case 1:
barrier_nospec();
__get_user_size(*(u8 *)to, from, 1, ret);
break;
case 2:
barrier_nospec();
__get_user_size(*(u16 *)to, from, 2, ret);
break;
case 4:
barrier_nospec();
__get_user_size(*(u32 *)to, from, 4, ret);
break;
case 8:
barrier_nospec();
__get_user_size(*(u64 *)to, from, 8, ret);
break;
}
@@ -304,6 +312,7 @@ static inline unsigned long raw_copy_from_user(void *to,
return 0;
}
barrier_nospec();
return __copy_tofrom_user((__force void __user *)to, from, n);
}

3
arch/powerpc/kernel/Makefile
View File

@@ -45,9 +45,10 @@ obj-$(CONFIG_VDSO32) += vdso32/
obj-$(CONFIG_PPC_WATCHDOG) += watchdog.o
obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_ppc970.o cpu_setup_pa6t.o
obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_power.o security.o
obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_power.o
obj-$(CONFIG_PPC_BOOK3S_64) += mce.o mce_power.o
obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o idle_book3e.o
obj-$(CONFIG_PPC_BARRIER_NOSPEC) += security.o
obj-$(CONFIG_PPC64) += vdso64/
obj-$(CONFIG_ALTIVEC) += vecemu.o
obj-$(CONFIG_PPC_970_NAP) += idle_power4.o

10
arch/powerpc/kernel/entry_32.S
View File

@@ -33,6 +33,7 @@
#include <asm/unistd.h>
#include <asm/ptrace.h>
#include <asm/export.h>
#include <asm/barrier.h>
/*
* MSR_KERNEL is > 0x10000 on 4xx/Book-E since it include MSR_CE.
@@ -358,6 +359,15 @@ syscall_dotrace_cont:
ori r10,r10,sys_call_table@l
slwi r0,r0,2
bge- 66f
barrier_nospec_asm
/*
* Prevent the load of the handler below (based on the user-passed
* system call number) being speculatively executed until the test
* against NR_syscalls and branch to .66f above has
* committed.
*/
lwzx r10,r10,r0 /* Fetch system call handler [ptr] */
mtlr r10
addi r9,r1,STACK_FRAME_OVERHEAD

69
arch/powerpc/kernel/entry_64.S
View File

@@ -25,6 +25,7 @@
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/thread_info.h>
#include <asm/code-patching-asm.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/cputable.h>
@@ -36,6 +37,7 @@
#include <asm/context_tracking.h>
#include <asm/tm.h>
#include <asm/ppc-opcode.h>
#include <asm/barrier.h>
#include <asm/export.h>
#ifdef CONFIG_PPC_BOOK3S
#include <asm/exception-64s.h>
@@ -76,6 +78,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_TM)
std r0,GPR0(r1)
std r10,GPR1(r1)
beq 2f /* if from kernel mode */
#ifdef CONFIG_PPC_FSL_BOOK3E
START_BTB_FLUSH_SECTION
BTB_FLUSH(r10)
END_BTB_FLUSH_SECTION
#endif
ACCOUNT_CPU_USER_ENTRY(r13, r10, r11)
2: std r2,GPR2(r1)
std r3,GPR3(r1)
@@ -179,6 +186,15 @@ system_call: /* label this so stack traces look sane */
clrldi r8,r8,32
15:
slwi r0,r0,4
barrier_nospec_asm
/*
* Prevent the load of the handler below (based on the user-passed
* system call number) being speculatively executed until the test
* against NR_syscalls and branch to .Lsyscall_enosys above has
* committed.
*/
ldx r12,r11,r0 /* Fetch system call handler [ptr] */
mtctr r12
bctrl /* Call handler */
@@ -487,6 +503,57 @@ _GLOBAL(ret_from_kernel_thread)
li r3,0
b .Lsyscall_exit
#ifdef CONFIG_PPC_BOOK3S_64
#define FLUSH_COUNT_CACHE \
1: nop; \
patch_site 1b, patch__call_flush_count_cache
#define BCCTR_FLUSH .long 0x4c400420
.macro nops number
.rept \number
nop
.endr
.endm
.balign 32
.global flush_count_cache
flush_count_cache:
/* Save LR into r9 */
mflr r9
.rept 64
bl .+4
.endr
b 1f
nops 6
.balign 32
/* Restore LR */
1: mtlr r9
li r9,0x7fff
mtctr r9
BCCTR_FLUSH
2: nop
patch_site 2b patch__flush_count_cache_return
nops 3
.rept 278
.balign 32
BCCTR_FLUSH
nops 7
.endr
blr
#else
#define FLUSH_COUNT_CACHE
#endif /* CONFIG_PPC_BOOK3S_64 */
/*
* This routine switches between two different tasks. The process
* state of one is saved on its kernel stack. Then the state
@@ -518,6 +585,8 @@ _GLOBAL(_switch)
std r23,_CCR(r1)
std r1,KSP(r3) /* Set old stack pointer */
FLUSH_COUNT_CACHE
/*
* On SMP kernels, care must be taken because a task may be
* scheduled off CPUx and on to CPUy. Memory ordering must be

27
arch/powerpc/kernel/exceptions-64e.S
View File

@@ -295,7 +295,8 @@ ret_from_mc_except:
andi. r10,r11,MSR_PR; /* save stack pointer */ \
beq 1f; /* branch around if supervisor */ \
ld r1,PACAKSAVE(r13); /* get kernel stack coming from usr */\
1: cmpdi cr1,r1,0; /* check if SP makes sense */ \
1: type##_BTB_FLUSH \
cmpdi cr1,r1,0; /* check if SP makes sense */ \
bge- cr1,exc_##n##_bad_stack;/* bad stack (TODO: out of line) */ \
mfspr r10,SPRN_##type##_SRR0; /* read SRR0 before touching stack */
@@ -327,6 +328,30 @@ ret_from_mc_except:
#define SPRN_MC_SRR0 SPRN_MCSRR0
#define SPRN_MC_SRR1 SPRN_MCSRR1
#ifdef CONFIG_PPC_FSL_BOOK3E
#define GEN_BTB_FLUSH \
START_BTB_FLUSH_SECTION \
beq 1f; \
BTB_FLUSH(r10) \
1: \
END_BTB_FLUSH_SECTION
#define CRIT_BTB_FLUSH \
START_BTB_FLUSH_SECTION \
BTB_FLUSH(r10) \
END_BTB_FLUSH_SECTION
#define DBG_BTB_FLUSH CRIT_BTB_FLUSH
#define MC_BTB_FLUSH CRIT_BTB_FLUSH
#define GDBELL_BTB_FLUSH GEN_BTB_FLUSH
#else
#define GEN_BTB_FLUSH
#define CRIT_BTB_FLUSH
#define DBG_BTB_FLUSH
#define MC_BTB_FLUSH
#define GDBELL_BTB_FLUSH
#endif
#define NORMAL_EXCEPTION_PROLOG(n, intnum, addition) \
EXCEPTION_PROLOG(n, intnum, GEN, addition##_GEN(n))

12
arch/powerpc/kernel/head_booke.h
View File

@@ -32,6 +32,16 @@
*/
#define THREAD_NORMSAVE(offset) (THREAD_NORMSAVES + (offset * 4))
#ifdef CONFIG_PPC_FSL_BOOK3E
#define BOOKE_CLEAR_BTB(reg) \
START_BTB_FLUSH_SECTION \
BTB_FLUSH(reg) \
END_BTB_FLUSH_SECTION
#else
#define BOOKE_CLEAR_BTB(reg)
#endif
#define NORMAL_EXCEPTION_PROLOG(intno) \
mtspr SPRN_SPRG_WSCRATCH0, r10; /* save one register */ \
mfspr r10, SPRN_SPRG_THREAD; \
@@ -43,6 +53,7 @@
andi. r11, r11, MSR_PR; /* check whether user or kernel */\
mr r11, r1; \
beq 1f; \
BOOKE_CLEAR_BTB(r11) \
/* if from user, start at top of this thread's kernel stack */ \
lwz r11, THREAD_INFO-THREAD(r10); \
ALLOC_STACK_FRAME(r11, THREAD_SIZE); \
@@ -128,6 +139,7 @@
stw r9,_CCR(r8); /* save CR on stack */\
mfspr r11,exc_level_srr1; /* check whether user or kernel */\
DO_KVM BOOKE_INTERRUPT_##intno exc_level_srr1; \
BOOKE_CLEAR_BTB(r10) \
andi. r11,r11,MSR_PR; \
mfspr r11,SPRN_SPRG_THREAD; /* if from user, start at top of */\
lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\

15
arch/powerpc/kernel/head_fsl_booke.S
View File

@@ -452,6 +452,13 @@ END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV)
mfcr r13
stw r13, THREAD_NORMSAVE(3)(r10)
DO_KVM BOOKE_INTERRUPT_DTLB_MISS SPRN_SRR1
START_BTB_FLUSH_SECTION
mfspr r11, SPRN_SRR1
andi. r10,r11,MSR_PR
beq 1f
BTB_FLUSH(r10)
1:
END_BTB_FLUSH_SECTION
mfspr r10, SPRN_DEAR /* Get faulting address */
/* If we are faulting a kernel address, we have to use the
@@ -546,6 +553,14 @@ END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV)
mfcr r13
stw r13, THREAD_NORMSAVE(3)(r10)
DO_KVM BOOKE_INTERRUPT_ITLB_MISS SPRN_SRR1
START_BTB_FLUSH_SECTION
mfspr r11, SPRN_SRR1
andi. r10,r11,MSR_PR
beq 1f
BTB_FLUSH(r10)
1:
END_BTB_FLUSH_SECTION
mfspr r10, SPRN_SRR0 /* Get faulting address */
/* If we are faulting a kernel address, we have to use the

10
arch/powerpc/kernel/module.c
View File

@@ -72,7 +72,15 @@ int module_finalize(const Elf_Ehdr *hdr,
do_feature_fixups(powerpc_firmware_features,
(void *)sect->sh_addr,
(void *)sect->sh_addr + sect->sh_size);
#endif
#endif /* CONFIG_PPC64 */
#ifdef CONFIG_PPC_BARRIER_NOSPEC
sect = find_section(hdr, sechdrs, "__spec_barrier_fixup");
if (sect != NULL)
do_barrier_nospec_fixups_range(barrier_nospec_enabled,
(void *)sect->sh_addr,
(void *)sect->sh_addr + sect->sh_size);
#endif /* CONFIG_PPC_BARRIER_NOSPEC */
sect = find_section(hdr, sechdrs, "__lwsync_fixup");
if (sect != NULL)

215
arch/powerpc/kernel/security.c
View File

@@ -9,11 +9,120 @@
#include <linux/seq_buf.h>
#include <asm/debugfs.h>
#include <asm/asm-prototypes.h>
#include <asm/code-patching.h>
#include <asm/security_features.h>
#include <asm/setup.h>
unsigned long powerpc_security_features __read_mostly = SEC_FTR_DEFAULT;
enum count_cache_flush_type {
COUNT_CACHE_FLUSH_NONE = 0x1,
COUNT_CACHE_FLUSH_SW = 0x2,
COUNT_CACHE_FLUSH_HW = 0x4,
};
static enum count_cache_flush_type count_cache_flush_type = COUNT_CACHE_FLUSH_NONE;
bool barrier_nospec_enabled;
static bool no_nospec;
static bool btb_flush_enabled;
#ifdef CONFIG_PPC_FSL_BOOK3E
static bool no_spectrev2;
#endif
static void enable_barrier_nospec(bool enable)
{
barrier_nospec_enabled = enable;
do_barrier_nospec_fixups(enable);
}
void setup_barrier_nospec(void)
{
bool enable;
/*
* It would make sense to check SEC_FTR_SPEC_BAR_ORI31 below as well.
* But there's a good reason not to. The two flags we check below are
* both are enabled by default in the kernel, so if the hcall is not
* functional they will be enabled.
* On a system where the host firmware has been updated (so the ori
* functions as a barrier), but on which the hypervisor (KVM/Qemu) has
* not been updated, we would like to enable the barrier. Dropping the
* check for SEC_FTR_SPEC_BAR_ORI31 achieves that. The only downside is
* we potentially enable the barrier on systems where the host firmware
* is not updated, but that's harmless as it's a no-op.
*/
enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
security_ftr_enabled(SEC_FTR_BNDS_CHK_SPEC_BAR);
if (!no_nospec)
enable_barrier_nospec(enable);
}
static int __init handle_nospectre_v1(char *p)
{
no_nospec = true;
return 0;
}
early_param("nospectre_v1", handle_nospectre_v1);
#ifdef CONFIG_DEBUG_FS
static int barrier_nospec_set(void *data, u64 val)
{
switch (val) {
case 0:
case 1:
break;
default:
return -EINVAL;
}
if (!!val == !!barrier_nospec_enabled)
return 0;
enable_barrier_nospec(!!val);
return 0;
}
static int barrier_nospec_get(void *data, u64 *val)
{
*val = barrier_nospec_enabled ? 1 : 0;
return 0;
}
DEFINE_SIMPLE_ATTRIBUTE(fops_barrier_nospec,
barrier_nospec_get, barrier_nospec_set, "%llu\n");
static __init int barrier_nospec_debugfs_init(void)
{
debugfs_create_file("barrier_nospec", 0600, powerpc_debugfs_root, NULL,
&fops_barrier_nospec);
return 0;
}
device_initcall(barrier_nospec_debugfs_init);
#endif /* CONFIG_DEBUG_FS */
#ifdef CONFIG_PPC_FSL_BOOK3E
static int __init handle_nospectre_v2(char *p)
{
no_spectrev2 = true;
return 0;
}
early_param("nospectre_v2", handle_nospectre_v2);
void setup_spectre_v2(void)
{
if (no_spectrev2)
do_btb_flush_fixups();
else
btb_flush_enabled = true;
}
#endif /* CONFIG_PPC_FSL_BOOK3E */
#ifdef CONFIG_PPC_BOOK3S_64
ssize_t cpu_show_meltdown(struct device *dev, struct device_attribute *attr, char *buf)
{
bool thread_priv;
@@ -46,25 +155,39 @@ ssize_t cpu_show_meltdown(struct device *dev, struct device_attribute *attr, cha
return sprintf(buf, "Vulnerable\n");
}
#endif
ssize_t cpu_show_spectre_v1(struct device *dev, struct device_attribute *attr, char *buf)
{
if (!security_ftr_enabled(SEC_FTR_BNDS_CHK_SPEC_BAR))
return sprintf(buf, "Not affected\n");
struct seq_buf s;
return sprintf(buf, "Vulnerable\n");
seq_buf_init(&s, buf, PAGE_SIZE - 1);
if (security_ftr_enabled(SEC_FTR_BNDS_CHK_SPEC_BAR)) {
if (barrier_nospec_enabled)
seq_buf_printf(&s, "Mitigation: __user pointer sanitization");
else
seq_buf_printf(&s, "Vulnerable");
if (security_ftr_enabled(SEC_FTR_SPEC_BAR_ORI31))
seq_buf_printf(&s, ", ori31 speculation barrier enabled");
seq_buf_printf(&s, "\n");
} else
seq_buf_printf(&s, "Not affected\n");
return s.len;
}
ssize_t cpu_show_spectre_v2(struct device *dev, struct device_attribute *attr, char *buf)
{
bool bcs, ccd, ori;
struct seq_buf s;
bool bcs, ccd;
seq_buf_init(&s, buf, PAGE_SIZE - 1);
bcs = security_ftr_enabled(SEC_FTR_BCCTRL_SERIALISED);
ccd = security_ftr_enabled(SEC_FTR_COUNT_CACHE_DISABLED);
ori = security_ftr_enabled(SEC_FTR_SPEC_BAR_ORI31);
if (bcs || ccd) {
seq_buf_printf(&s, "Mitigation: ");
@@ -77,17 +200,23 @@ ssize_t cpu_show_spectre_v2(struct device *dev, struct device_attribute *attr, c
if (ccd)
seq_buf_printf(&s, "Indirect branch cache disabled");
} else
seq_buf_printf(&s, "Vulnerable");
} else if (count_cache_flush_type != COUNT_CACHE_FLUSH_NONE) {
seq_buf_printf(&s, "Mitigation: Software count cache flush");
if (ori)
seq_buf_printf(&s, ", ori31 speculation barrier enabled");
if (count_cache_flush_type == COUNT_CACHE_FLUSH_HW)
seq_buf_printf(&s, " (hardware accelerated)");
} else if (btb_flush_enabled) {
seq_buf_printf(&s, "Mitigation: Branch predictor state flush");
} else {
seq_buf_printf(&s, "Vulnerable");
}
seq_buf_printf(&s, "\n");
return s.len;
}
#ifdef CONFIG_PPC_BOOK3S_64
/*
* Store-forwarding barrier support.
*/
@@ -235,3 +364,71 @@ static __init int stf_barrier_debugfs_init(void)
}
device_initcall(stf_barrier_debugfs_init);
#endif /* CONFIG_DEBUG_FS */
static void toggle_count_cache_flush(bool enable)
{
if (!enable || !security_ftr_enabled(SEC_FTR_FLUSH_COUNT_CACHE)) {
patch_instruction_site(&patch__call_flush_count_cache, PPC_INST_NOP);
count_cache_flush_type = COUNT_CACHE_FLUSH_NONE;
pr_info("count-cache-flush: software flush disabled.\n");
return;
}
patch_branch_site(&patch__call_flush_count_cache,
(u64)&flush_count_cache, BRANCH_SET_LINK);
if (!security_ftr_enabled(SEC_FTR_BCCTR_FLUSH_ASSIST)) {
count_cache_flush_type = COUNT_CACHE_FLUSH_SW;
pr_info("count-cache-flush: full software flush sequence enabled.\n");
return;
}
patch_instruction_site(&patch__flush_count_cache_return, PPC_INST_BLR);
count_cache_flush_type = COUNT_CACHE_FLUSH_HW;
pr_info("count-cache-flush: hardware assisted flush sequence enabled\n");
}
void setup_count_cache_flush(void)
{
toggle_count_cache_flush(true);
}
#ifdef CONFIG_DEBUG_FS
static int count_cache_flush_set(void *data, u64 val)
{
bool enable;
if (val == 1)
enable = true;
else if (val == 0)
enable = false;
else
return -EINVAL;
toggle_count_cache_flush(enable);
return 0;
}
static int count_cache_flush_get(void *data, u64 *val)
{
if (count_cache_flush_type == COUNT_CACHE_FLUSH_NONE)
*val = 0;
else
*val = 1;
return 0;
}
DEFINE_SIMPLE_ATTRIBUTE(fops_count_cache_flush, count_cache_flush_get,
count_cache_flush_set, "%llu\n");
static __init int count_cache_flush_debugfs_init(void)
{
debugfs_create_file("count_cache_flush", 0600, powerpc_debugfs_root,
NULL, &fops_count_cache_flush);
return 0;
}
device_initcall(count_cache_flush_debugfs_init);
#endif /* CONFIG_DEBUG_FS */
#endif /* CONFIG_PPC_BOOK3S_64 */

3
arch/powerpc/kernel/setup-common.c
View File

@@ -937,6 +937,9 @@ void __init setup_arch(char **cmdline_p)
if (ppc_md.setup_arch)
ppc_md.setup_arch();
setup_barrier_nospec();
setup_spectre_v2();
paging_init();
/* Initialize the MMU context management stuff. */

19
arch/powerpc/kernel/vmlinux.lds.S
View File

@@ -153,8 +153,25 @@ SECTIONS
*(__rfi_flush_fixup)
__stop___rfi_flush_fixup = .;
}
#endif
#endif /* CONFIG_PPC64 */
#ifdef CONFIG_PPC_BARRIER_NOSPEC
. = ALIGN(8);
__spec_barrier_fixup : AT(ADDR(__spec_barrier_fixup) - LOAD_OFFSET) {
__start___barrier_nospec_fixup = .;
*(__barrier_nospec_fixup)
__stop___barrier_nospec_fixup = .;
}
#endif /* CONFIG_PPC_BARRIER_NOSPEC */
#ifdef CONFIG_PPC_FSL_BOOK3E
. = ALIGN(8);
__spec_btb_flush_fixup : AT(ADDR(__spec_btb_flush_fixup) - LOAD_OFFSET) {
__start__btb_flush_fixup = .;
*(__btb_flush_fixup)
__stop__btb_flush_fixup = .;
}
#endif
EXCEPTION_TABLE(0)
NOTES :kernel :notes

4
arch/powerpc/kvm/bookehv_interrupts.S
View File

@@ -75,6 +75,10 @@
PPC_LL r1, VCPU_HOST_STACK(r4)
PPC_LL r2, HOST_R2(r1)
START_BTB_FLUSH_SECTION
BTB_FLUSH(r10)
END_BTB_FLUSH_SECTION
mfspr r10, SPRN_PID
lwz r8, VCPU_HOST_PID(r4)
PPC_LL r11, VCPU_SHARED(r4)

7
arch/powerpc/kvm/e500_emulate.c
View File

@@ -277,6 +277,13 @@ int kvmppc_core_emulate_mtspr_e500(struct kvm_vcpu *vcpu, int sprn, ulong spr_va
vcpu->arch.pwrmgtcr0 = spr_val;
break;
case SPRN_BUCSR:
/*
* If we are here, it means that we have already flushed the
* branch predictor, so just return to guest.
*/
break;
/* extra exceptions */
#ifdef CONFIG_SPE_POSSIBLE
case SPRN_IVOR32:

16
arch/powerpc/lib/code-patching.c
View File

@@ -206,6 +206,22 @@ int patch_branch(unsigned int *addr, unsigned long target, int flags)
return patch_instruction(addr, create_branch(addr, target, flags));
}
int patch_branch_site(s32 *site, unsigned long target, int flags)
{
unsigned int *addr;
addr = (unsigned int *)((unsigned long)site + *site);
return patch_instruction(addr, create_branch(addr, target, flags));
}
int patch_instruction_site(s32 *site, unsigned int instr)
{
unsigned int *addr;
addr = (unsigned int *)((unsigned long)site + *site);
return patch_instruction(addr, instr);
}
bool is_offset_in_branch_range(long offset)
{
/*

93
arch/powerpc/lib/feature-fixups.c
View File

@@ -277,8 +277,101 @@ void do_rfi_flush_fixups(enum l1d_flush_type types)
(types & L1D_FLUSH_MTTRIG) ? "mttrig type"
: "unknown");
}
void do_barrier_nospec_fixups_range(bool enable, void *fixup_start, void *fixup_end)
{
unsigned int instr, *dest;
long *start, *end;
int i;
start = fixup_start;
end = fixup_end;
instr = 0x60000000; /* nop */
if (enable) {
pr_info("barrier-nospec: using ORI speculation barrier\n");
instr = 0x63ff0000; /* ori 31,31,0 speculation barrier */
}
for (i = 0; start < end; start++, i++) {
dest = (void *)start + *start;
pr_devel("patching dest %lx\n", (unsigned long)dest);
patch_instruction(dest, instr);
}
printk(KERN_DEBUG "barrier-nospec: patched %d locations\n", i);
}
#endif /* CONFIG_PPC_BOOK3S_64 */
#ifdef CONFIG_PPC_BARRIER_NOSPEC
void do_barrier_nospec_fixups(bool enable)
{
void *start, *end;
start = PTRRELOC(&__start___barrier_nospec_fixup),
end = PTRRELOC(&__stop___barrier_nospec_fixup);
do_barrier_nospec_fixups_range(enable, start, end);
}
#endif /* CONFIG_PPC_BARRIER_NOSPEC */
#ifdef CONFIG_PPC_FSL_BOOK3E
void do_barrier_nospec_fixups_range(bool enable, void *fixup_start, void *fixup_end)
{
unsigned int instr[2], *dest;
long *start, *end;
int i;
start = fixup_start;
end = fixup_end;
instr[0] = PPC_INST_NOP;
instr[1] = PPC_INST_NOP;
if (enable) {
pr_info("barrier-nospec: using isync; sync as speculation barrier\n");
instr[0] = PPC_INST_ISYNC;
instr[1] = PPC_INST_SYNC;
}
for (i = 0; start < end; start++, i++) {
dest = (void *)start + *start;
pr_devel("patching dest %lx\n", (unsigned long)dest);
patch_instruction(dest, instr[0]);
patch_instruction(dest + 1, instr[1]);
}
printk(KERN_DEBUG "barrier-nospec: patched %d locations\n", i);
}
static void patch_btb_flush_section(long *curr)
{
unsigned int *start, *end;
start = (void *)curr + *curr;
end = (void *)curr + *(curr + 1);
for (; start < end; start++) {
pr_devel("patching dest %lx\n", (unsigned long)start);
patch_instruction(start, PPC_INST_NOP);
}
}
void do_btb_flush_fixups(void)
{
long *start, *end;
start = PTRRELOC(&__start__btb_flush_fixup);
end = PTRRELOC(&__stop__btb_flush_fixup);
for (; start < end; start += 2)
patch_btb_flush_section(start);
}
#endif /* CONFIG_PPC_FSL_BOOK3E */
void do_lwsync_fixups(unsigned long value, void *fixup_start, void *fixup_end)
{
long *start, *end;

7
arch/powerpc/mm/tlb_low_64e.S
View File

@@ -69,6 +69,13 @@ END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV)
std r15,EX_TLB_R15(r12)
std r10,EX_TLB_CR(r12)
#ifdef CONFIG_PPC_FSL_BOOK3E
START_BTB_FLUSH_SECTION
mfspr r11, SPRN_SRR1
andi. r10,r11,MSR_PR
beq 1f
BTB_FLUSH(r10)
1:
END_BTB_FLUSH_SECTION
std r7,EX_TLB_R7(r12)
#endif
TLB_MISS_PROLOG_STATS

17
arch/powerpc/net/bpf_jit.h
View File

@@ -51,6 +51,8 @@
#define PPC_LIS(r, i) PPC_ADDIS(r, 0, i)
#define PPC_STD(r, base, i) EMIT(PPC_INST_STD | ___PPC_RS(r) | \
___PPC_RA(base) | ((i) & 0xfffc))
#define PPC_STDX(r, base, b) EMIT(PPC_INST_STDX | ___PPC_RS(r) | \
___PPC_RA(base) | ___PPC_RB(b))
#define PPC_STDU(r, base, i) EMIT(PPC_INST_STDU | ___PPC_RS(r) | \
___PPC_RA(base) | ((i) & 0xfffc))
#define PPC_STW(r, base, i) EMIT(PPC_INST_STW | ___PPC_RS(r) | \
@@ -65,7 +67,9 @@
#define PPC_LBZ(r, base, i) EMIT(PPC_INST_LBZ | ___PPC_RT(r) | \
___PPC_RA(base) | IMM_L(i))
#define PPC_LD(r, base, i) EMIT(PPC_INST_LD | ___PPC_RT(r) | \
___PPC_RA(base) | IMM_L(i))
___PPC_RA(base) | ((i) & 0xfffc))
#define PPC_LDX(r, base, b) EMIT(PPC_INST_LDX | ___PPC_RT(r) | \
___PPC_RA(base) | ___PPC_RB(b))
#define PPC_LWZ(r, base, i) EMIT(PPC_INST_LWZ | ___PPC_RT(r) | \
___PPC_RA(base) | IMM_L(i))
#define PPC_LHZ(r, base, i) EMIT(PPC_INST_LHZ | ___PPC_RT(r) | \
@@ -85,17 +89,6 @@
___PPC_RA(a) | ___PPC_RB(b))
#define PPC_BPF_STDCX(s, a, b) EMIT(PPC_INST_STDCX | ___PPC_RS(s) | \
___PPC_RA(a) | ___PPC_RB(b))
#ifdef CONFIG_PPC64
#define PPC_BPF_LL(r, base, i) do { PPC_LD(r, base, i); } while(0)
#define PPC_BPF_STL(r, base, i) do { PPC_STD(r, base, i); } while(0)
#define PPC_BPF_STLU(r, base, i) do { PPC_STDU(r, base, i); } while(0)
#else
#define PPC_BPF_LL(r, base, i) do { PPC_LWZ(r, base, i); } while(0)
#define PPC_BPF_STL(r, base, i) do { PPC_STW(r, base, i); } while(0)
#define PPC_BPF_STLU(r, base, i) do { PPC_STWU(r, base, i); } while(0)
#endif
#define PPC_CMPWI(a, i) EMIT(PPC_INST_CMPWI | ___PPC_RA(a) | IMM_L(i))
#define PPC_CMPDI(a, i) EMIT(PPC_INST_CMPDI | ___PPC_RA(a) | IMM_L(i))
#define PPC_CMPW(a, b) EMIT(PPC_INST_CMPW | ___PPC_RA(a) | \

4
arch/powerpc/net/bpf_jit32.h
View File

@@ -122,6 +122,10 @@ DECLARE_LOAD_FUNC(sk_load_byte_msh);
#define PPC_NTOHS_OFFS(r, base, i) PPC_LHZ_OFFS(r, base, i)
#endif
#define PPC_BPF_LL(r, base, i) do { PPC_LWZ(r, base, i); } while(0)
#define PPC_BPF_STL(r, base, i) do { PPC_STW(r, base, i); } while(0)
#define PPC_BPF_STLU(r, base, i) do { PPC_STWU(r, base, i); } while(0)
#define SEEN_DATAREF 0x10000 /* might call external helpers */
#define SEEN_XREG 0x20000 /* X reg is used */
#define SEEN_MEM 0x40000 /* SEEN_MEM+(1<<n) = use mem[n] for temporary

20
arch/powerpc/net/bpf_jit64.h
View File

@@ -86,6 +86,26 @@ DECLARE_LOAD_FUNC(sk_load_byte);
(imm >= SKF_LL_OFF ? func##_negative_offset : func) : \
func##_positive_offset)
/*
* WARNING: These can use TMP_REG_2 if the offset is not at word boundary,
* so ensure that it isn't in use already.
*/
#define PPC_BPF_LL(r, base, i) do { \
if ((i) % 4) { \
PPC_LI(b2p[TMP_REG_2], (i)); \
PPC_LDX(r, base, b2p[TMP_REG_2]); \
} else \
PPC_LD(r, base, i); \
} while(0)
#define PPC_BPF_STL(r, base, i) do { \
if ((i) % 4) { \
PPC_LI(b2p[TMP_REG_2], (i)); \
PPC_STDX(r, base, b2p[TMP_REG_2]); \
} else \
PPC_STD(r, base, i); \
} while(0)
#define PPC_BPF_STLU(r, base, i) do { PPC_STDU(r, base, i); } while(0)
#define SEEN_FUNC 0x1000 /* might call external helpers */
#define SEEN_STACK 0x2000 /* uses BPF stack */
#define SEEN_SKB 0x4000 /* uses sk_buff */

12
arch/powerpc/net/bpf_jit_comp64.c
View File

@@ -261,7 +261,7 @@ static void bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32
* if (tail_call_cnt > MAX_TAIL_CALL_CNT)
* goto out;
*/
PPC_LD(b2p[TMP_REG_1], 1, bpf_jit_stack_tailcallcnt(ctx));
PPC_BPF_LL(b2p[TMP_REG_1], 1, bpf_jit_stack_tailcallcnt(ctx));
PPC_CMPLWI(b2p[TMP_REG_1], MAX_TAIL_CALL_CNT);
PPC_BCC(COND_GT, out);
@@ -274,7 +274,7 @@ static void bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32
/* prog = array->ptrs[index]; */
PPC_MULI(b2p[TMP_REG_1], b2p_index, 8);
PPC_ADD(b2p[TMP_REG_1], b2p[TMP_REG_1], b2p_bpf_array);
PPC_LD(b2p[TMP_REG_1], b2p[TMP_REG_1], offsetof(struct bpf_array, ptrs));
PPC_BPF_LL(b2p[TMP_REG_1], b2p[TMP_REG_1], offsetof(struct bpf_array, ptrs));
/*
* if (prog == NULL)
@@ -284,7 +284,7 @@ static void bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32
PPC_BCC(COND_EQ, out);
/* goto *(prog->bpf_func + prologue_size); */
PPC_LD(b2p[TMP_REG_1], b2p[TMP_REG_1], offsetof(struct bpf_prog, bpf_func));
PPC_BPF_LL(b2p[TMP_REG_1], b2p[TMP_REG_1], offsetof(struct bpf_prog, bpf_func));
#ifdef PPC64_ELF_ABI_v1
/* skip past the function descriptor */
PPC_ADDI(b2p[TMP_REG_1], b2p[TMP_REG_1],
@@ -616,7 +616,7 @@ bpf_alu32_trunc:
* the instructions generated will remain the
* same across all passes
*/
PPC_STD(dst_reg, 1, bpf_jit_stack_local(ctx));
PPC_BPF_STL(dst_reg, 1, bpf_jit_stack_local(ctx));
PPC_ADDI(b2p[TMP_REG_1], 1, bpf_jit_stack_local(ctx));
PPC_LDBRX(dst_reg, 0, b2p[TMP_REG_1]);
break;
@@ -672,7 +672,7 @@ emit_clear:
PPC_LI32(b2p[TMP_REG_1], imm);
src_reg = b2p[TMP_REG_1];
}
PPC_STD(src_reg, dst_reg, off);
PPC_BPF_STL(src_reg, dst_reg, off);
break;
/*
@@ -719,7 +719,7 @@ emit_clear:
break;
/* dst = *(u64 *)(ul) (src + off) */
case BPF_LDX | BPF_MEM | BPF_DW:
PPC_LD(dst_reg, src_reg, off);
PPC_BPF_LL(dst_reg, src_reg, off);
break;
/*

7
arch/powerpc/platforms/powernv/setup.c
View File

@@ -77,6 +77,12 @@ static void init_fw_feat_flags(struct device_node *np)
if (fw_feature_is("enabled", "fw-count-cache-disabled", np))
security_ftr_set(SEC_FTR_COUNT_CACHE_DISABLED);
if (fw_feature_is("enabled", "fw-count-cache-flush-bcctr2,0,0", np))
security_ftr_set(SEC_FTR_BCCTR_FLUSH_ASSIST);
if (fw_feature_is("enabled", "needs-count-cache-flush-on-context-switch", np))
security_ftr_set(SEC_FTR_FLUSH_COUNT_CACHE);
/*
* The features below are enabled by default, so we instead look to see
* if firmware has *disabled* them, and clear them if so.
@@ -123,6 +129,7 @@ static void pnv_setup_rfi_flush(void)
security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV));
setup_rfi_flush(type, enable);
setup_count_cache_flush();
}
static void __init pnv_setup_arch(void)

7
arch/powerpc/platforms/pseries/setup.c
View File

@@ -484,6 +484,12 @@ static void init_cpu_char_feature_flags(struct h_cpu_char_result *result)
if (result->character & H_CPU_CHAR_COUNT_CACHE_DISABLED)
security_ftr_set(SEC_FTR_COUNT_CACHE_DISABLED);
if (result->character & H_CPU_CHAR_BCCTR_FLUSH_ASSIST)
security_ftr_set(SEC_FTR_BCCTR_FLUSH_ASSIST);
if (result->behaviour & H_CPU_BEHAV_FLUSH_COUNT_CACHE)
security_ftr_set(SEC_FTR_FLUSH_COUNT_CACHE);
/*
* The features below are enabled by default, so we instead look to see
* if firmware has *disabled* them, and clear them if so.
@@ -534,6 +540,7 @@ void pseries_setup_rfi_flush(void)
security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR);
setup_rfi_flush(types, enable);
setup_count_cache_flush();
}
static void __init pSeries_setup_arch(void)

8
arch/x86/Kconfig
View File

@@ -2139,14 +2139,8 @@ config RANDOMIZE_MEMORY_PHYSICAL_PADDING
If unsure, leave at the default value.
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs"
def_bool y
depends on SMP
---help---
Say Y here to allow turning CPUs off and on. CPUs can be
controlled through /sys/devices/system/cpu.
( Note: power management support will enable this option
automatically on SMP systems. )
Say N if you want to disable CPU hotplug.
config BOOTPARAM_HOTPLUG_CPU0
bool "Set default setting of cpu0_hotpluggable"

1
arch/x86/include/asm/kvm_host.h
View File

@@ -509,6 +509,7 @@ struct kvm_vcpu_arch {
bool tpr_access_reporting;
u64 ia32_xss;
u64 microcode_version;
u64 arch_capabilities;
/*
* Paging state of the vcpu

14
arch/x86/kvm/vmx.c
View File

@@ -740,7 +740,6 @@ struct vcpu_vmx {
u64 msr_guest_kernel_gs_base;
#endif
u64 arch_capabilities;
u64 spec_ctrl;
u32 vm_entry_controls_shadow;
@@ -3493,12 +3492,6 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
msr_info->data = to_vmx(vcpu)->spec_ctrl;
break;
case MSR_IA32_ARCH_CAPABILITIES:
if (!msr_info->host_initiated &&
!guest_cpuid_has(vcpu, X86_FEATURE_ARCH_CAPABILITIES))
return 1;
msr_info->data = to_vmx(vcpu)->arch_capabilities;
break;
case MSR_IA32_SYSENTER_CS:
msr_info->data = vmcs_read32(GUEST_SYSENTER_CS);
break;
@@ -3663,11 +3656,6 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
vmx_disable_intercept_for_msr(vmx->vmcs01.msr_bitmap, MSR_IA32_PRED_CMD,
MSR_TYPE_W);
break;
case MSR_IA32_ARCH_CAPABILITIES:
if (!msr_info->host_initiated)
return 1;
vmx->arch_capabilities = data;
break;
case MSR_IA32_CR_PAT:
if (vmcs_config.vmentry_ctrl & VM_ENTRY_LOAD_IA32_PAT) {
if (!kvm_mtrr_valid(vcpu, MSR_IA32_CR_PAT, data))
@@ -5929,8 +5917,6 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
++vmx->nmsrs;
}
vmx->arch_capabilities = kvm_get_arch_capabilities();
vm_exit_controls_init(vmx, vmcs_config.vmexit_ctrl);
/* 22.2.1, 20.8.1 */

12
arch/x86/kvm/x86.c
View File

@@ -2234,6 +2234,11 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
if (msr_info->host_initiated)
vcpu->arch.microcode_version = data;
break;
case MSR_IA32_ARCH_CAPABILITIES:
if (!msr_info->host_initiated)
return 1;
vcpu->arch.arch_capabilities = data;
break;
case MSR_EFER:
return set_efer(vcpu, data);
case MSR_K7_HWCR:
@@ -2523,6 +2528,12 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
case MSR_IA32_UCODE_REV:
msr_info->data = vcpu->arch.microcode_version;
break;
case MSR_IA32_ARCH_CAPABILITIES:
if (!msr_info->host_initiated &&
!guest_cpuid_has(vcpu, X86_FEATURE_ARCH_CAPABILITIES))
return 1;
msr_info->data = vcpu->arch.arch_capabilities;
break;
case MSR_MTRRcap:
case 0x200 ... 0x2ff:
return kvm_mtrr_get_msr(vcpu, msr_info->index, &msr_info->data);
@@ -7918,6 +7929,7 @@ int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
{
int r;
vcpu->arch.arch_capabilities = kvm_get_arch_capabilities();
kvm_vcpu_mtrr_init(vcpu);
r = vcpu_load(vcpu);
if (r)

6
drivers/gpio/gpio-adnp.c
View File

@@ -132,8 +132,10 @@ static int adnp_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
if (err < 0)
goto out;
if (err & BIT(pos))
err = -EACCES;
if (value & BIT(pos)) {
err = -EPERM;
goto out;
}
err = 0;

2
drivers/gpio/gpio-exar.c
View File

@@ -148,6 +148,8 @@ static int gpio_exar_probe(struct platform_device *pdev)
mutex_init(&exar_gpio->lock);
index = ida_simple_get(&ida_index, 0, 0, GFP_KERNEL);
if (index < 0)
goto err_destroy;
sprintf(exar_gpio->name, "exar_gpio%d", index);
exar_gpio->gpio_chip.label = exar_gpio->name;

6
drivers/gpu/drm/vgem/vgem_drv.c
View File

@@ -192,13 +192,9 @@ static struct drm_gem_object *vgem_gem_create(struct drm_device *dev,
ret = drm_gem_handle_create(file, &obj->base, handle);
drm_gem_object_put_unlocked(&obj->base);
if (ret)
goto err;
return ERR_PTR(ret);
return &obj->base;
err:
__vgem_gem_destroy(obj);
return ERR_PTR(ret);
}
static int vgem_gem_dumb_create(struct drm_file *file, struct drm_device *dev,

3
drivers/isdn/hardware/mISDN/hfcmulti.c
View File

@@ -4367,7 +4367,8 @@ setup_pci(struct hfc_multi *hc, struct pci_dev *pdev,
if (m->clock2)
test_and_set_bit(HFC_CHIP_CLOCK2, &hc->chip);
if (ent->device == 0xB410) {
if (ent->vendor == PCI_VENDOR_ID_DIGIUM &&
ent->device == PCI_DEVICE_ID_DIGIUM_HFC4S) {
test_and_set_bit(HFC_CHIP_B410P, &hc->chip);
test_and_set_bit(HFC_CHIP_PCM_MASTER, &hc->chip);
test_and_clear_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);

18
drivers/net/dsa/qca8k.c
View File

@@ -629,22 +629,6 @@ qca8k_adjust_link(struct dsa_switch *ds, int port, struct phy_device *phy)
qca8k_port_set_status(priv, port, 1);
}
static int
qca8k_phy_read(struct dsa_switch *ds, int phy, int regnum)
{
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
return mdiobus_read(priv->bus, phy, regnum);
}
static int
qca8k_phy_write(struct dsa_switch *ds, int phy, int regnum, u16 val)
{
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
return mdiobus_write(priv->bus, phy, regnum, val);
}
static void
qca8k_get_strings(struct dsa_switch *ds, int port, uint8_t *data)
{
@@ -879,8 +863,6 @@ static const struct dsa_switch_ops qca8k_switch_ops = {
.setup = qca8k_setup,
.adjust_link = qca8k_adjust_link,
.get_strings = qca8k_get_strings,
.phy_read = qca8k_phy_read,
.phy_write = qca8k_phy_write,
.get_ethtool_stats = qca8k_get_ethtool_stats,
.get_sset_count = qca8k_get_sset_count,
.get_mac_eee = qca8k_get_mac_eee,

19
drivers/net/ethernet/8390/mac8390.c
View File

@@ -156,8 +156,6 @@ static void dayna_block_output(struct net_device *dev, int count,
#define memcpy_fromio(a, b, c) memcpy((a), (void *)(b), (c))
#define memcpy_toio(a, b, c) memcpy((void *)(a), (b), (c))
#define memcmp_withio(a, b, c) memcmp((a), (void *)(b), (c))
/* Slow Sane (16-bit chunk memory read/write) Cabletron uses this */
static void slow_sane_get_8390_hdr(struct net_device *dev,
struct e8390_pkt_hdr *hdr, int ring_page);
@@ -237,19 +235,26 @@ static enum mac8390_type __init mac8390_ident(struct nubus_dev *dev)
static enum mac8390_access __init mac8390_testio(volatile unsigned long membase)
{
unsigned long outdata = 0xA5A0B5B0;
unsigned long indata = 0x00000000;
u32 outdata = 0xA5A0B5B0;
u32 indata = 0;
/* Try writing 32 bits */
memcpy_toio(membase, &outdata, 4);
/* Now compare them */
if (memcmp_withio(&outdata, membase, 4) == 0)
nubus_writel(outdata, membase);
/* Now read it back */
indata = nubus_readl(membase);
if (outdata == indata)
return ACCESS_32;
outdata = 0xC5C0D5D0;
indata = 0;
/* Write 16 bit output */
word_memcpy_tocard(membase, &outdata, 4);
/* Now read it back */
word_memcpy_fromcard(&indata, membase, 4);
if (outdata == indata)
return ACCESS_16;
return ACCESS_UNKNOWN;
}

5
drivers/net/ethernet/aquantia/atlantic/aq_ring.c
View File

@@ -270,11 +270,12 @@ int aq_ring_rx_clean(struct aq_ring_s *self,
} else {
if (buff->is_ip_cso) {
__skb_incr_checksum_unnecessary(skb);
if (buff->is_udp_cso || buff->is_tcp_cso)
__skb_incr_checksum_unnecessary(skb);
} else {
skb->ip_summed = CHECKSUM_NONE;
}
if (buff->is_udp_cso || buff->is_tcp_cso)
__skb_incr_checksum_unnecessary(skb);
}
skb_set_hash(skb, buff->rss_hash,

30
drivers/net/ethernet/cavium/thunder/nicvf_queues.c
View File

@@ -105,20 +105,19 @@ static inline struct pgcache *nicvf_alloc_page(struct nicvf *nic,
/* Check if page can be recycled */
if (page) {
ref_count = page_ref_count(page);
/* Check if this page has been used once i.e 'put_page'
* called after packet transmission i.e internal ref_count
* and page's ref_count are equal i.e page can be recycled.
/* This page can be recycled if internal ref_count and page's
* ref_count are equal, indicating that the page has been used
* once for packet transmission. For non-XDP mode, internal
* ref_count is always '1'.
*/
if (rbdr->is_xdp && (ref_count == pgcache->ref_count))
pgcache->ref_count--;
else
page = NULL;
/* In non-XDP mode, page's ref_count needs to be '1' for it
* to be recycled.
*/
if (!rbdr->is_xdp && (ref_count != 1))
if (rbdr->is_xdp) {
if (ref_count == pgcache->ref_count)
pgcache->ref_count--;
else
page = NULL;
} else if (ref_count != 1) {
page = NULL;
}
}
if (!page) {
@@ -365,11 +364,10 @@ static void nicvf_free_rbdr(struct nicvf *nic, struct rbdr *rbdr)
while (head < rbdr->pgcnt) {
pgcache = &rbdr->pgcache[head];
if (pgcache->page && page_ref_count(pgcache->page) != 0) {
if (!rbdr->is_xdp) {
put_page(pgcache->page);
continue;
if (rbdr->is_xdp) {
page_ref_sub(pgcache->page,
pgcache->ref_count - 1);
}
page_ref_sub(pgcache->page, pgcache->ref_count - 1);
put_page(pgcache->page);
}
head++;

5
drivers/net/ethernet/stmicro/stmmac/ring_mode.c
View File

@@ -114,10 +114,11 @@ static unsigned int stmmac_is_jumbo_frm(int len, int enh_desc)
static void stmmac_refill_desc3(void *priv_ptr, struct dma_desc *p)
{
struct stmmac_priv *priv = (struct stmmac_priv *)priv_ptr;
struct stmmac_rx_queue *rx_q = priv_ptr;
struct stmmac_priv *priv = rx_q->priv_data;
/* Fill DES3 in case of RING mode */
if (priv->dma_buf_sz >= BUF_SIZE_8KiB)
if (priv->dma_buf_sz == BUF_SIZE_16KiB)
p->des3 = cpu_to_le32(le32_to_cpu(p->des2) + BUF_SIZE_8KiB);
}

16
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
View File

@@ -3787,6 +3787,20 @@ static int stmmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
return ret;
}
static int stmmac_set_mac_address(struct net_device *ndev, void *addr)
{
struct stmmac_priv *priv = netdev_priv(ndev);
int ret = 0;
ret = eth_mac_addr(ndev, addr);
if (ret)
return ret;
priv->hw->mac->set_umac_addr(priv->hw, ndev->dev_addr, 0);
return ret;
}
#ifdef CONFIG_DEBUG_FS
static struct dentry *stmmac_fs_dir;
@@ -4014,7 +4028,7 @@ static const struct net_device_ops stmmac_netdev_ops = {
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = stmmac_poll_controller,
#endif
.ndo_set_mac_address = eth_mac_addr,
.ndo_set_mac_address = stmmac_set_mac_address,
};
/**

16
drivers/net/tun.c
View File

@@ -1403,9 +1403,6 @@ static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile,
u32 rxhash;
int skb_xdp = 1;
if (!(tun->dev->flags & IFF_UP))
return -EIO;
if (!(tun->flags & IFF_NO_PI)) {
if (len < sizeof(pi))
return -EINVAL;
@@ -1493,9 +1490,11 @@ static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile,
err = skb_copy_datagram_from_iter(skb, 0, from, len);
if (err) {
err = -EFAULT;
drop:
this_cpu_inc(tun->pcpu_stats->rx_dropped);
kfree_skb(skb);
return -EFAULT;
return err;
}
}
@@ -1566,11 +1565,20 @@ static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile,
}
rxhash = __skb_get_hash_symmetric(skb);
rcu_read_lock();
if (unlikely(!(tun->dev->flags & IFF_UP))) {
err = -EIO;
rcu_read_unlock();
goto drop;
}
#ifndef CONFIG_4KSTACKS
tun_rx_batched(tun, tfile, skb, more);
#else
netif_rx_ni(skb);
#endif
rcu_read_unlock();
stats = get_cpu_ptr(tun->pcpu_stats);
u64_stats_update_begin(&stats->syncp);

4
drivers/net/vxlan.c
View File

@@ -3793,10 +3793,8 @@ static void __net_exit vxlan_exit_net(struct net *net)
/* If vxlan->dev is in the same netns, it has already been added
* to the list by the previous loop.
*/
if (!net_eq(dev_net(vxlan->dev), net)) {
gro_cells_destroy(&vxlan->gro_cells);
if (!net_eq(dev_net(vxlan->dev), net))
unregister_netdevice_queue(vxlan->dev, &list);
}
}
unregister_netdevice_many(&list);

5
drivers/phy/allwinner/phy-sun4i-usb.c
View File

@@ -480,8 +480,11 @@ static int sun4i_usb_phy_set_mode(struct phy *_phy, enum phy_mode mode)
struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
int new_mode;
if (phy->index != 0)
if (phy->index != 0) {
if (mode == PHY_MODE_USB_HOST)
return 0;
return -EINVAL;
}
switch (mode) {
case PHY_MODE_USB_HOST:

8
drivers/s390/cio/vfio_ccw_drv.c
View File

@@ -70,20 +70,24 @@ static void vfio_ccw_sch_io_todo(struct work_struct *work)
{
struct vfio_ccw_private *private;
struct irb *irb;
bool is_final;
private = container_of(work, struct vfio_ccw_private, io_work);
irb = &private->irb;
is_final = !(scsw_actl(&irb->scsw) &
(SCSW_ACTL_DEVACT | SCSW_ACTL_SCHACT));
if (scsw_is_solicited(&irb->scsw)) {
cp_update_scsw(&private->cp, &irb->scsw);
cp_free(&private->cp);
if (is_final)
cp_free(&private->cp);
}
memcpy(private->io_region.irb_area, irb, sizeof(*irb));
if (private->io_trigger)
eventfd_signal(private->io_trigger, 1);
if (private->mdev)
if (private->mdev && is_final)
private->state = VFIO_CCW_STATE_IDLE;
}

17
drivers/s390/scsi/zfcp_erp.c
View File

@@ -652,6 +652,20 @@ static void zfcp_erp_strategy_memwait(struct zfcp_erp_action *erp_action)
add_timer(&erp_action->timer);
}
void zfcp_erp_port_forced_reopen_all(struct zfcp_adapter *adapter,
int clear, char *dbftag)
{
unsigned long flags;
struct zfcp_port *port;
write_lock_irqsave(&adapter->erp_lock, flags);
read_lock(&adapter->port_list_lock);
list_for_each_entry(port, &adapter->port_list, list)
_zfcp_erp_port_forced_reopen(port, clear, dbftag);
read_unlock(&adapter->port_list_lock);
write_unlock_irqrestore(&adapter->erp_lock, flags);
}
static void _zfcp_erp_port_reopen_all(struct zfcp_adapter *adapter,
int clear, char *id)
{
@@ -1306,6 +1320,9 @@ static void zfcp_erp_try_rport_unblock(struct zfcp_port *port)
struct zfcp_scsi_dev *zsdev = sdev_to_zfcp(sdev);
int lun_status;
if (sdev->sdev_state == SDEV_DEL ||
sdev->sdev_state == SDEV_CANCEL)
continue;
if (zsdev->port != port)
continue;
/* LUN under port of interest */

2
drivers/s390/scsi/zfcp_ext.h
View File

@@ -68,6 +68,8 @@ extern void zfcp_erp_clear_port_status(struct zfcp_port *, u32);
extern int zfcp_erp_port_reopen(struct zfcp_port *, int, char *);
extern void zfcp_erp_port_shutdown(struct zfcp_port *, int, char *);
extern void zfcp_erp_port_forced_reopen(struct zfcp_port *, int, char *);
extern void zfcp_erp_port_forced_reopen_all(struct zfcp_adapter *adapter,
int clear, char *dbftag);
extern void zfcp_erp_set_lun_status(struct scsi_device *, u32);
extern void zfcp_erp_clear_lun_status(struct scsi_device *, u32);
extern void zfcp_erp_lun_reopen(struct scsi_device *, int, char *);

4
drivers/s390/scsi/zfcp_scsi.c
View File

@@ -327,6 +327,10 @@ static int zfcp_scsi_eh_host_reset_handler(struct scsi_cmnd *scpnt)
struct zfcp_adapter *adapter = zfcp_sdev->port->adapter;
int ret = SUCCESS, fc_ret;
if (!(adapter->connection_features & FSF_FEATURE_NPIV_MODE)) {
zfcp_erp_port_forced_reopen_all(adapter, 0, "schrh_p");
zfcp_erp_wait(adapter);
}
zfcp_erp_adapter_reopen(adapter, 0, "schrh_1");
zfcp_erp_wait(adapter);
fc_ret = fc_block_scsi_eh(scpnt);

22
drivers/scsi/sd.c
View File

@@ -1420,11 +1420,6 @@ static void sd_release(struct gendisk *disk, fmode_t mode)
scsi_set_medium_removal(sdev, SCSI_REMOVAL_ALLOW);
}
/*
* XXX and what if there are packets in flight and this close()
* XXX is followed by a "rmmod sd_mod"?
*/
scsi_disk_put(sdkp);
}
@@ -3089,6 +3084,9 @@ static bool sd_validate_opt_xfer_size(struct scsi_disk *sdkp,
unsigned int opt_xfer_bytes =
logical_to_bytes(sdp, sdkp->opt_xfer_blocks);
if (sdkp->opt_xfer_blocks == 0)
return false;
if (sdkp->opt_xfer_blocks > dev_max) {
sd_first_printk(KERN_WARNING, sdkp,
"Optimal transfer size %u logical blocks " \
@@ -3521,11 +3519,23 @@ static void scsi_disk_release(struct device *dev)
{
struct scsi_disk *sdkp = to_scsi_disk(dev);
struct gendisk *disk = sdkp->disk;
struct request_queue *q = disk->queue;
spin_lock(&sd_index_lock);
ida_remove(&sd_index_ida, sdkp->index);
spin_unlock(&sd_index_lock);
/*
* Wait until all requests that are in progress have completed.
* This is necessary to avoid that e.g. scsi_end_request() crashes
* due to clearing the disk->private_data pointer. Wait from inside
* scsi_disk_release() instead of from sd_release() to avoid that
* freezing and unfreezing the request queue affects user space I/O
* in case multiple processes open a /dev/sd... node concurrently.
*/
blk_mq_freeze_queue(q);
blk_mq_unfreeze_queue(q);
disk->private_data = NULL;
put_disk(disk);
put_device(&sdkp->device->sdev_gendev);

2
drivers/staging/comedi/comedidev.h
View File

@@ -992,6 +992,8 @@ int comedi_dio_insn_config(struct comedi_device *dev,
unsigned int mask);
unsigned int comedi_dio_update_state(struct comedi_subdevice *s,
unsigned int *data);
unsigned int comedi_bytes_per_scan_cmd(struct comedi_subdevice *s,
struct comedi_cmd *cmd);
unsigned int comedi_bytes_per_scan(struct comedi_subdevice *s);
unsigned int comedi_nscans_left(struct comedi_subdevice *s,
unsigned int nscans);

33
drivers/staging/comedi/drivers.c
View File

@@ -390,11 +390,13 @@ unsigned int comedi_dio_update_state(struct comedi_subdevice *s,
EXPORT_SYMBOL_GPL(comedi_dio_update_state);
/**
* comedi_bytes_per_scan() - Get length of asynchronous command "scan" in bytes
* comedi_bytes_per_scan_cmd() - Get length of asynchronous command "scan" in
* bytes
* @s: COMEDI subdevice.
* @cmd: COMEDI command.
*
* Determines the overall scan length according to the subdevice type and the
* number of channels in the scan.
* number of channels in the scan for the specified command.
*
* For digital input, output or input/output subdevices, samples for
* multiple channels are assumed to be packed into one or more unsigned
@@ -404,9 +406,9 @@ EXPORT_SYMBOL_GPL(comedi_dio_update_state);
*
* Returns the overall scan length in bytes.
*/
unsigned int comedi_bytes_per_scan(struct comedi_subdevice *s)
unsigned int comedi_bytes_per_scan_cmd(struct comedi_subdevice *s,
struct comedi_cmd *cmd)
{
struct comedi_cmd *cmd = &s->async->cmd;
unsigned int num_samples;
unsigned int bits_per_sample;
@@ -423,6 +425,29 @@ unsigned int comedi_bytes_per_scan(struct comedi_subdevice *s)
}
return comedi_samples_to_bytes(s, num_samples);
}
EXPORT_SYMBOL_GPL(comedi_bytes_per_scan_cmd);
/**
* comedi_bytes_per_scan() - Get length of asynchronous command "scan" in bytes
* @s: COMEDI subdevice.
*
* Determines the overall scan length according to the subdevice type and the
* number of channels in the scan for the current command.
*
* For digital input, output or input/output subdevices, samples for
* multiple channels are assumed to be packed into one or more unsigned
* short or unsigned int values according to the subdevice's %SDF_LSAMPL
* flag. For other types of subdevice, samples are assumed to occupy a
* whole unsigned short or unsigned int according to the %SDF_LSAMPL flag.
*
* Returns the overall scan length in bytes.
*/
unsigned int comedi_bytes_per_scan(struct comedi_subdevice *s)
{
struct comedi_cmd *cmd = &s->async->cmd;
return comedi_bytes_per_scan_cmd(s, cmd);
}
EXPORT_SYMBOL_GPL(comedi_bytes_per_scan);
static unsigned int __comedi_nscans_left(struct comedi_subdevice *s,

10
drivers/staging/comedi/drivers/ni_mio_common.c
View File

@@ -3523,6 +3523,7 @@ static int ni_cdio_check_chanlist(struct comedi_device *dev,
static int ni_cdio_cmdtest(struct comedi_device *dev,
struct comedi_subdevice *s, struct comedi_cmd *cmd)
{
unsigned int bytes_per_scan;
int err = 0;
int tmp;
@@ -3552,9 +3553,12 @@ static int ni_cdio_cmdtest(struct comedi_device *dev,
err |= comedi_check_trigger_arg_is(&cmd->convert_arg, 0);
err |= comedi_check_trigger_arg_is(&cmd->scan_end_arg,
cmd->chanlist_len);
err |= comedi_check_trigger_arg_max(&cmd->stop_arg,
s->async->prealloc_bufsz /
comedi_bytes_per_scan(s));
bytes_per_scan = comedi_bytes_per_scan_cmd(s, cmd);
if (bytes_per_scan) {
err |= comedi_check_trigger_arg_max(&cmd->stop_arg,
s->async->prealloc_bufsz /
bytes_per_scan);
}
if (err)
return 3;

11
drivers/staging/vt6655/device_main.c
View File

@@ -973,8 +973,6 @@ static void vnt_interrupt_process(struct vnt_private *priv)
return;
}
MACvIntDisable(priv->PortOffset);
spin_lock_irqsave(&priv->lock, flags);
/* Read low level stats */
@@ -1062,8 +1060,6 @@ static void vnt_interrupt_process(struct vnt_private *priv)
}
spin_unlock_irqrestore(&priv->lock, flags);
MACvIntEnable(priv->PortOffset, IMR_MASK_VALUE);
}
static void vnt_interrupt_work(struct work_struct *work)
@@ -1073,14 +1069,17 @@ static void vnt_interrupt_work(struct work_struct *work)
if (priv->vif)
vnt_interrupt_process(priv);
MACvIntEnable(priv->PortOffset, IMR_MASK_VALUE);
}
static irqreturn_t vnt_interrupt(int irq, void *arg)
{
struct vnt_private *priv = arg;
if (priv->vif)
schedule_work(&priv->interrupt_work);
schedule_work(&priv->interrupt_work);
MACvIntDisable(priv->PortOffset);
return IRQ_HANDLED;
}

4
drivers/tty/serial/atmel_serial.c
View File

@@ -1163,6 +1163,10 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
sg_dma_len(&atmel_port->sg_rx)/2,
DMA_DEV_TO_MEM,
DMA_PREP_INTERRUPT);
if (!desc) {
dev_err(port->dev, "Preparing DMA cyclic failed\n");
goto chan_err;
}
desc->callback = atmel_complete_rx_dma;
desc->callback_param = port;
atmel_port->desc_rx = desc;

4
drivers/tty/serial/kgdboc.c
View File

@@ -148,8 +148,10 @@ static int configure_kgdboc(void)
char *cptr = config;
struct console *cons;
if (!strlen(config) || isspace(config[0]))
if (!strlen(config) || isspace(config[0])) {
err = 0;
goto noconfig;
}
kgdboc_io_ops.is_console = 0;
kgdb_tty_driver = NULL;

2
drivers/tty/serial/max310x.c
View File

@@ -1323,6 +1323,8 @@ static int max310x_spi_probe(struct spi_device *spi)
if (spi->dev.of_node) {
const struct of_device_id *of_id =
of_match_device(max310x_dt_ids, &spi->dev);
if (!of_id)
return -ENODEV;
devtype = (struct max310x_devtype *)of_id->data;
} else {

12
drivers/tty/serial/sh-sci.c
View File

@@ -806,19 +806,9 @@ static void sci_transmit_chars(struct uart_port *port)
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
if (uart_circ_empty(xmit)) {
if (uart_circ_empty(xmit))
sci_stop_tx(port);
} else {
ctrl = serial_port_in(port, SCSCR);
if (port->type != PORT_SCI) {
serial_port_in(port, SCxSR); /* Dummy read */
sci_clear_SCxSR(port, SCxSR_TDxE_CLEAR(port));
}
ctrl |= SCSCR_TIE;
serial_port_out(port, SCSCR, ctrl);
}
}
/* On SH3, SCIF may read end-of-break as a space->mark char */

4
drivers/usb/class/cdc-acm.c
View File

@@ -570,10 +570,8 @@ static void acm_softint(struct work_struct *work)
clear_bit(EVENT_RX_STALL, &acm->flags);
}
if (test_bit(EVENT_TTY_WAKEUP, &acm->flags)) {
if (test_and_clear_bit(EVENT_TTY_WAKEUP, &acm->flags))
tty_port_tty_wakeup(&acm->port);
clear_bit(EVENT_TTY_WAKEUP, &acm->flags);
}
}
/*

2
drivers/usb/common/common.c
View File

@@ -148,6 +148,8 @@ enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *np, int arg0)
do {
controller = of_find_node_with_property(controller, "phys");
if (!of_device_is_available(controller))
continue;
index = 0;
do {
if (arg0 == -1) {

9
drivers/usb/core/config.c
View File

@@ -768,21 +768,18 @@ void usb_destroy_configuration(struct usb_device *dev)
return;
if (dev->rawdescriptors) {
for (i = 0; i < dev->descriptor.bNumConfigurations &&
i < USB_MAXCONFIG; i++)
for (i = 0; i < dev->descriptor.bNumConfigurations; i++)
kfree(dev->rawdescriptors[i]);
kfree(dev->rawdescriptors);
dev->rawdescriptors = NULL;
}
for (c = 0; c < dev->descriptor.bNumConfigurations &&
c < USB_MAXCONFIG; c++) {
for (c = 0; c < dev->descriptor.bNumConfigurations; c++) {
struct usb_host_config *cf = &dev->config[c];
kfree(cf->string);
for (i = 0; i < cf->desc.bNumInterfaces &&
i < USB_MAXINTERFACES; i++) {
for (i = 0; i < cf->desc.bNumInterfaces; i++) {
if (cf->intf_cache[i])
kref_put(&cf->intf_cache[i]->ref,
usb_release_interface_cache);

6
drivers/usb/gadget/function/f_hid.c
View File

@@ -395,20 +395,20 @@ try_again:
req->complete = f_hidg_req_complete;
req->context = hidg;
spin_unlock_irqrestore(&hidg->write_spinlock, flags);
status = usb_ep_queue(hidg->in_ep, req, GFP_ATOMIC);
if (status < 0) {
ERROR(hidg->func.config->cdev,
"usb_ep_queue error on int endpoint %zd\n", status);
goto release_write_pending_unlocked;
goto release_write_pending;
} else {
status = count;
}
spin_unlock_irqrestore(&hidg->write_spinlock, flags);
return status;
release_write_pending:
spin_lock_irqsave(&hidg->write_spinlock, flags);
release_write_pending_unlocked:
hidg->write_pending = 0;
spin_unlock_irqrestore(&hidg->write_spinlock, flags);

1
drivers/usb/host/xhci-rcar.c
View File

@@ -236,6 +236,7 @@ int xhci_rcar_init_quirk(struct usb_hcd *hcd)
xhci_rcar_is_gen3(hcd->self.controller))
xhci->quirks |= XHCI_NO_64BIT_SUPPORT;
xhci->quirks |= XHCI_TRUST_TX_LENGTH;
return xhci_rcar_download_firmware(hcd);
}

9
drivers/usb/host/xhci-ring.c
View File

@@ -1715,10 +1715,13 @@ static void handle_port_status(struct xhci_hcd *xhci,
}
}
if ((portsc & PORT_PLC) && (portsc & PORT_PLS_MASK) == XDEV_U0 &&
DEV_SUPERSPEED_ANY(portsc)) {
if ((portsc & PORT_PLC) &&
DEV_SUPERSPEED_ANY(portsc) &&
((portsc & PORT_PLS_MASK) == XDEV_U0 ||
(portsc & PORT_PLS_MASK) == XDEV_U1 ||
(portsc & PORT_PLS_MASK) == XDEV_U2)) {
xhci_dbg(xhci, "resume SS port %d finished\n", port_id);
/* We've just brought the device into U0 through either the
/* We've just brought the device into U0/1/2 through either the
* Resume state after a device remote wakeup, or through the
* U3Exit state after a host-initiated resume. If it's a device
* initiated remote wake, don't pass up the link state change,

1
drivers/usb/mtu3/Kconfig
View File

@@ -4,6 +4,7 @@ config USB_MTU3
tristate "MediaTek USB3 Dual Role controller"
depends on EXTCON && (USB || USB_GADGET) && HAS_DMA
depends on ARCH_MEDIATEK || COMPILE_TEST
depends on EXTCON || !EXTCON
select USB_XHCI_MTK if USB_SUPPORT && USB_XHCI_HCD
help
Say Y or M here if your system runs on MediaTek SoCs with

1
drivers/usb/serial/cp210x.c
View File

@@ -83,6 +83,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x10C4, 0x804E) }, /* Software Bisque Paramount ME build-in converter */
{ USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
{ USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */
{ USB_DEVICE(0x10C4, 0x8056) }, /* Lorenz Messtechnik devices */
{ USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
{ USB_DEVICE(0x10C4, 0x806F) }, /* IMS USB to RS422 Converter Cable */
{ USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */

2
drivers/usb/serial/ftdi_sio.c
View File

@@ -604,6 +604,8 @@ static const struct usb_device_id id_table_combined[] = {
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLXM_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLX_PLUS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_NT_ORION_IO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SYNAPSE_SS200_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX2_PID) },

4
drivers/usb/serial/ftdi_sio_ids.h
View File

@@ -567,7 +567,9 @@
/*
* NovaTech product ids (FTDI_VID)
*/
#define FTDI_NT_ORIONLXM_PID 0x7c90 /* OrionLXm Substation Automation Platform */
#define FTDI_NT_ORIONLXM_PID 0x7c90 /* OrionLXm Substation Automation Platform */
#define FTDI_NT_ORIONLX_PLUS_PID 0x7c91 /* OrionLX+ Substation Automation Platform */
#define FTDI_NT_ORION_IO_PID 0x7c92 /* Orion I/O */
/*
* Synapse Wireless product ids (FTDI_VID)

4
drivers/usb/serial/mos7720.c
View File

@@ -368,8 +368,6 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport,
if (!urbtrack)
return -ENOMEM;
kref_get(&mos_parport->ref_count);
urbtrack->mos_parport = mos_parport;
urbtrack->urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urbtrack->urb) {
kfree(urbtrack);
@@ -390,6 +388,8 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport,
usb_sndctrlpipe(usbdev, 0),
(unsigned char *)urbtrack->setup,
NULL, 0, async_complete, urbtrack);
kref_get(&mos_parport->ref_count);
urbtrack->mos_parport = mos_parport;
kref_init(&urbtrack->ref_count);
INIT_LIST_HEAD(&urbtrack->urblist_entry);

17
drivers/usb/serial/option.c
View File

@@ -249,6 +249,7 @@ static void option_instat_callback(struct urb *urb);
#define QUECTEL_PRODUCT_EC25 0x0125
#define QUECTEL_PRODUCT_BG96 0x0296
#define QUECTEL_PRODUCT_EP06 0x0306
#define QUECTEL_PRODUCT_EM12 0x0512
#define CMOTECH_VENDOR_ID 0x16d8
#define CMOTECH_PRODUCT_6001 0x6001
@@ -1069,7 +1070,8 @@ static const struct usb_device_id option_ids[] = {
.driver_info = RSVD(3) },
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000), /* SIMCom SIM5218 */
.driver_info = NCTRL(0) | NCTRL(1) | NCTRL(2) | NCTRL(3) | RSVD(4) },
/* Quectel products using Qualcomm vendor ID */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC15)},
{ USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC20),
@@ -1090,6 +1092,9 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff),
.driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0xff, 0xff),
.driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) },
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003),
@@ -1942,10 +1947,12 @@ static const struct usb_device_id option_ids[] = {
.driver_info = RSVD(4) },
{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e35, 0xff), /* D-Link DWM-222 */
.driver_info = RSVD(4) },
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/A3 */
{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) }, /* OLICARD300 - MT6225 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/A3 */
{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2031, 0xff), /* Olicard 600 */
.driver_info = RSVD(4) },
{ USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) }, /* OLICARD300 - MT6225 */
{ USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) },
{ USB_DEVICE(VIATELECOM_VENDOR_ID, VIATELECOM_PRODUCT_CDS7) },
{ USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD200, 0xff, 0xff, 0xff) },

3
fs/btrfs/raid56.c
View File

@@ -2414,8 +2414,9 @@ static noinline void finish_parity_scrub(struct btrfs_raid_bio *rbio,
bitmap_clear(rbio->dbitmap, pagenr, 1);
kunmap(p);
for (stripe = 0; stripe < rbio->real_stripes; stripe++)
for (stripe = 0; stripe < nr_data; stripe++)
kunmap(page_in_rbio(rbio, stripe, pagenr, 0));
kunmap(p_page);
}
__free_page(p_page);

24
fs/btrfs/tree-log.c
View File

@@ -3422,9 +3422,16 @@ static noinline int log_dir_items(struct btrfs_trans_handle *trans,
}
btrfs_release_path(path);
/* find the first key from this transaction again */
/*
* Find the first key from this transaction again. See the note for
* log_new_dir_dentries, if we're logging a directory recursively we
* won't be holding its i_mutex, which means we can modify the directory
* while we're logging it. If we remove an entry between our first
* search and this search we'll not find the key again and can just
* bail.
*/
ret = btrfs_search_slot(NULL, root, &min_key, path, 0, 0);
if (WARN_ON(ret != 0))
if (ret != 0)
goto done;
/*
@@ -4501,6 +4508,19 @@ static int logged_inode_size(struct btrfs_root *log, struct btrfs_inode *inode,
item = btrfs_item_ptr(path->nodes[0], path->slots[0],
struct btrfs_inode_item);
*size_ret = btrfs_inode_size(path->nodes[0], item);
/*
* If the in-memory inode's i_size is smaller then the inode
* size stored in the btree, return the inode's i_size, so
* that we get a correct inode size after replaying the log
* when before a power failure we had a shrinking truncate
* followed by addition of a new name (rename / new hard link).
* Otherwise return the inode size from the btree, to avoid
* data loss when replaying a log due to previously doing a
* write that expands the inode's size and logging a new name
* immediately after.
*/
if (*size_ret > inode->vfs_inode.i_size)
*size_ret = inode->vfs_inode.i_size;
}
btrfs_release_path(path);

3
fs/nfs/nfs4proc.c
View File

@@ -2746,7 +2746,8 @@ static int _nfs4_open_and_get_state(struct nfs4_opendata *opendata,
nfs4_schedule_stateid_recovery(server, state);
}
out:
nfs4_sequence_free_slot(&opendata->o_res.seq_res);
if (!opendata->cancelled)
nfs4_sequence_free_slot(&opendata->o_res.seq_res);
return ret;
}

42
fs/ocfs2/refcounttree.c
View File

@@ -4716,22 +4716,23 @@ out:
/* Lock an inode and grab a bh pointing to the inode. */
static int ocfs2_reflink_inodes_lock(struct inode *s_inode,
struct buffer_head **bh1,
struct buffer_head **bh_s,
struct inode *t_inode,
struct buffer_head **bh2)
struct buffer_head **bh_t)
{
struct inode *inode1;
struct inode *inode2;
struct inode *inode1 = s_inode;
struct inode *inode2 = t_inode;
struct ocfs2_inode_info *oi1;
struct ocfs2_inode_info *oi2;
struct buffer_head *bh1 = NULL;
struct buffer_head *bh2 = NULL;
bool same_inode = (s_inode == t_inode);
bool need_swap = (inode1->i_ino > inode2->i_ino);
int status;
/* First grab the VFS and rw locks. */
lock_two_nondirectories(s_inode, t_inode);
inode1 = s_inode;
inode2 = t_inode;
if (inode1->i_ino > inode2->i_ino)
if (need_swap)
swap(inode1, inode2);
status = ocfs2_rw_lock(inode1, 1);
@@ -4754,17 +4755,13 @@ static int ocfs2_reflink_inodes_lock(struct inode *s_inode,
trace_ocfs2_double_lock((unsigned long long)oi1->ip_blkno,
(unsigned long long)oi2->ip_blkno);
if (*bh1)
*bh1 = NULL;
if (*bh2)
*bh2 = NULL;
/* We always want to lock the one with the lower lockid first. */
if (oi1->ip_blkno > oi2->ip_blkno)
mlog_errno(-ENOLCK);
/* lock id1 */
status = ocfs2_inode_lock_nested(inode1, bh1, 1, OI_LS_REFLINK_TARGET);
status = ocfs2_inode_lock_nested(inode1, &bh1, 1,
OI_LS_REFLINK_TARGET);
if (status < 0) {
if (status != -ENOENT)
mlog_errno(status);
@@ -4773,15 +4770,25 @@ static int ocfs2_reflink_inodes_lock(struct inode *s_inode,
/* lock id2 */
if (!same_inode) {
status = ocfs2_inode_lock_nested(inode2, bh2, 1,
status = ocfs2_inode_lock_nested(inode2, &bh2, 1,
OI_LS_REFLINK_TARGET);
if (status < 0) {
if (status != -ENOENT)
mlog_errno(status);
goto out_cl1;
}
} else
*bh2 = *bh1;
} else {
bh2 = bh1;
}
/*
* If we swapped inode order above, we have to swap the buffer heads
* before passing them back to the caller.
*/
if (need_swap)
swap(bh1, bh2);
*bh_s = bh1;
*bh_t = bh2;
trace_ocfs2_double_lock_end(
(unsigned long long)OCFS2_I(inode1)->ip_blkno,
@@ -4791,8 +4798,7 @@ static int ocfs2_reflink_inodes_lock(struct inode *s_inode,
out_cl1:
ocfs2_inode_unlock(inode1, 1);
brelse(*bh1);
*bh1 = NULL;
brelse(bh1);
out_rw2:
ocfs2_rw_unlock(inode2, 1);
out_i2:

6
fs/open.c
View File

@@ -728,6 +728,12 @@ static int do_dentry_open(struct file *f,
return 0;
}
/* Any file opened for execve()/uselib() has to be a regular file. */
if (unlikely(f->f_flags & FMODE_EXEC && !S_ISREG(inode->i_mode))) {
error = -EACCES;
goto cleanup_file;
}
if (f->f_mode & FMODE_WRITE && !special_file(inode->i_mode)) {
error = get_write_access(inode);
if (unlikely(error))

3
fs/proc/proc_sysctl.c
View File

@@ -1620,7 +1620,8 @@ static void drop_sysctl_table(struct ctl_table_header *header)
if (--header->nreg)
return;
put_links(header);
if (parent)
put_links(header);
start_unregistering(header);
if (!--header->count)
kfree_rcu(header, rcu);

2
include/net/sctp/checksum.h
View File

@@ -60,7 +60,7 @@ static inline __wsum sctp_csum_combine(__wsum csum, __wsum csum2,
static inline __le32 sctp_compute_cksum(const struct sk_buff *skb,
unsigned int offset)
{
struct sctphdr *sh = sctp_hdr(skb);
struct sctphdr *sh = (struct sctphdr *)(skb->data + offset);
__le32 ret, old = sh->checksum;
const struct skb_checksum_ops ops = {
.update = sctp_csum_update,

6
include/net/sock.h
View File

@@ -682,6 +682,12 @@ static inline void sk_add_node_rcu(struct sock *sk, struct hlist_head *list)
hlist_add_head_rcu(&sk->sk_node, list);
}
static inline void sk_add_node_tail_rcu(struct sock *sk, struct hlist_head *list)
{
sock_hold(sk);
hlist_add_tail_rcu(&sk->sk_node, list);
}
static inline void __sk_nulls_add_node_rcu(struct sock *sk, struct hlist_nulls_head *list)
{
hlist_nulls_add_head_rcu(&sk->sk_nulls_node, list);

20
kernel/cpu.c
View File

@@ -538,6 +538,20 @@ static void undo_cpu_up(unsigned int cpu, struct cpuhp_cpu_state *st)
}
}
static inline bool can_rollback_cpu(struct cpuhp_cpu_state *st)
{
if (IS_ENABLED(CONFIG_HOTPLUG_CPU))
return true;
/*
* When CPU hotplug is disabled, then taking the CPU down is not
* possible because takedown_cpu() and the architecture and
* subsystem specific mechanisms are not available. So the CPU
* which would be completely unplugged again needs to stay around
* in the current state.
*/
return st->state <= CPUHP_BRINGUP_CPU;
}
static int cpuhp_up_callbacks(unsigned int cpu, struct cpuhp_cpu_state *st,
enum cpuhp_state target)
{
@@ -548,8 +562,10 @@ static int cpuhp_up_callbacks(unsigned int cpu, struct cpuhp_cpu_state *st,
st->state++;
ret = cpuhp_invoke_callback(cpu, st->state, true, NULL, NULL);
if (ret) {
st->target = prev_state;
undo_cpu_up(cpu, st);
if (can_rollback_cpu(st)) {
st->target = prev_state;
undo_cpu_up(cpu, st);
}
break;
}
}

8
lib/rhashtable.c
View File

@@ -459,8 +459,12 @@ static void rht_deferred_worker(struct work_struct *work)
else if (tbl->nest)
err = rhashtable_rehash_alloc(ht, tbl, tbl->size);
if (!err)
err = rhashtable_rehash_table(ht);
if (!err || err == -EEXIST) {
int nerr;
nerr = rhashtable_rehash_table(ht);
err = err ?: nerr;
}
mutex_unlock(&ht->mutex);

11
mm/migrate.c
View File

@@ -247,10 +247,8 @@ static bool remove_migration_pte(struct page *page, struct vm_area_struct *vma,
pte = swp_entry_to_pte(entry);
} else if (is_device_public_page(new)) {
pte = pte_mkdevmap(pte);
flush_dcache_page(new);
}
} else
flush_dcache_page(new);
}
#ifdef CONFIG_HUGETLB_PAGE
if (PageHuge(new)) {
@@ -973,6 +971,13 @@ static int move_to_new_page(struct page *newpage, struct page *page,
*/
if (!PageMappingFlags(page))
page->mapping = NULL;
if (unlikely(is_zone_device_page(newpage))) {
if (is_device_public_page(newpage))
flush_dcache_page(newpage);
} else
flush_dcache_page(newpage);
}
out:
return rc;

83
net/bluetooth/l2cap_core.c
View File

@@ -3336,16 +3336,22 @@ static int l2cap_parse_conf_req(struct l2cap_chan *chan, void *data, size_t data
while (len >= L2CAP_CONF_OPT_SIZE) {
len -= l2cap_get_conf_opt(&req, &type, &olen, &val);
if (len < 0)
break;
hint = type & L2CAP_CONF_HINT;
type &= L2CAP_CONF_MASK;
switch (type) {
case L2CAP_CONF_MTU:
if (olen != 2)
break;
mtu = val;
break;
case L2CAP_CONF_FLUSH_TO:
if (olen != 2)
break;
chan->flush_to = val;
break;
@@ -3353,26 +3359,30 @@ static int l2cap_parse_conf_req(struct l2cap_chan *chan, void *data, size_t data
break;
case L2CAP_CONF_RFC:
if (olen == sizeof(rfc))
memcpy(&rfc, (void *) val, olen);
if (olen != sizeof(rfc))
break;
memcpy(&rfc, (void *) val, olen);
break;
case L2CAP_CONF_FCS:
if (olen != 1)
break;
if (val == L2CAP_FCS_NONE)
set_bit(CONF_RECV_NO_FCS, &chan->conf_state);
break;
case L2CAP_CONF_EFS:
if (olen == sizeof(efs)) {
remote_efs = 1;
memcpy(&efs, (void *) val, olen);
}
if (olen != sizeof(efs))
break;
remote_efs = 1;
memcpy(&efs, (void *) val, olen);
break;
case L2CAP_CONF_EWS:
if (olen != 2)
break;
if (!(chan->conn->local_fixed_chan & L2CAP_FC_A2MP))
return -ECONNREFUSED;
set_bit(FLAG_EXT_CTRL, &chan->flags);
set_bit(CONF_EWS_RECV, &chan->conf_state);
chan->tx_win_max = L2CAP_DEFAULT_EXT_WINDOW;
@@ -3382,7 +3392,6 @@ static int l2cap_parse_conf_req(struct l2cap_chan *chan, void *data, size_t data
default:
if (hint)
break;
result = L2CAP_CONF_UNKNOWN;
*((u8 *) ptr++) = type;
break;
@@ -3547,58 +3556,65 @@ static int l2cap_parse_conf_rsp(struct l2cap_chan *chan, void *rsp, int len,
while (len >= L2CAP_CONF_OPT_SIZE) {
len -= l2cap_get_conf_opt(&rsp, &type, &olen, &val);
if (len < 0)
break;
switch (type) {
case L2CAP_CONF_MTU:
if (olen != 2)
break;
if (val < L2CAP_DEFAULT_MIN_MTU) {
*result = L2CAP_CONF_UNACCEPT;
chan->imtu = L2CAP_DEFAULT_MIN_MTU;
} else
chan->imtu = val;
l2cap_add_conf_opt(&ptr, L2CAP_CONF_MTU, 2, chan->imtu, endptr - ptr);
l2cap_add_conf_opt(&ptr, L2CAP_CONF_MTU, 2, chan->imtu,
endptr - ptr);
break;
case L2CAP_CONF_FLUSH_TO:
if (olen != 2)
break;
chan->flush_to = val;
l2cap_add_conf_opt(&ptr, L2CAP_CONF_FLUSH_TO,
2, chan->flush_to, endptr - ptr);
l2cap_add_conf_opt(&ptr, L2CAP_CONF_FLUSH_TO, 2,
chan->flush_to, endptr - ptr);
break;
case L2CAP_CONF_RFC:
if (olen == sizeof(rfc))
memcpy(&rfc, (void *)val, olen);
if (olen != sizeof(rfc))
break;
memcpy(&rfc, (void *)val, olen);
if (test_bit(CONF_STATE2_DEVICE, &chan->conf_state) &&
rfc.mode != chan->mode)
return -ECONNREFUSED;
chan->fcs = 0;
l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC,
sizeof(rfc), (unsigned long) &rfc, endptr - ptr);
l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC, sizeof(rfc),
(unsigned long) &rfc, endptr - ptr);
break;
case L2CAP_CONF_EWS:
if (olen != 2)
break;
chan->ack_win = min_t(u16, val, chan->ack_win);
l2cap_add_conf_opt(&ptr, L2CAP_CONF_EWS, 2,
chan->tx_win, endptr - ptr);
break;
case L2CAP_CONF_EFS:
if (olen == sizeof(efs)) {
memcpy(&efs, (void *)val, olen);
if (chan->local_stype != L2CAP_SERV_NOTRAFIC &&
efs.stype != L2CAP_SERV_NOTRAFIC &&
efs.stype != chan->local_stype)
return -ECONNREFUSED;
l2cap_add_conf_opt(&ptr, L2CAP_CONF_EFS, sizeof(efs),
(unsigned long) &efs, endptr - ptr);
}
if (olen != sizeof(efs))
break;
memcpy(&efs, (void *)val, olen);
if (chan->local_stype != L2CAP_SERV_NOTRAFIC &&
efs.stype != L2CAP_SERV_NOTRAFIC &&
efs.stype != chan->local_stype)
return -ECONNREFUSED;
l2cap_add_conf_opt(&ptr, L2CAP_CONF_EFS, sizeof(efs),
(unsigned long) &efs, endptr - ptr);
break;
case L2CAP_CONF_FCS:
if (olen != 1)
break;
if (*result == L2CAP_CONF_PENDING)
if (val == L2CAP_FCS_NONE)
set_bit(CONF_RECV_NO_FCS,
@@ -3727,13 +3743,18 @@ static void l2cap_conf_rfc_get(struct l2cap_chan *chan, void *rsp, int len)
while (len >= L2CAP_CONF_OPT_SIZE) {
len -= l2cap_get_conf_opt(&rsp, &type, &olen, &val);
if (len < 0)
break;
switch (type) {
case L2CAP_CONF_RFC:
if (olen == sizeof(rfc))
memcpy(&rfc, (void *)val, olen);
if (olen != sizeof(rfc))
break;
memcpy(&rfc, (void *)val, olen);
break;
case L2CAP_CONF_EWS:
if (olen != 2)
break;
txwin_ext = val;
break;
}

2
net/core/datagram.c
View File

@@ -281,7 +281,7 @@ struct sk_buff *__skb_try_recv_datagram(struct sock *sk, unsigned int flags,
break;
sk_busy_loop(sk, flags & MSG_DONTWAIT);
} while (!skb_queue_empty(&sk->sk_receive_queue));
} while (sk->sk_receive_queue.prev != *last);
error = -EAGAIN;

6
net/core/net-sysfs.c
View File

@@ -917,6 +917,8 @@ static int rx_queue_add_kobject(struct net_device *dev, int index)
if (error)
return error;
dev_hold(queue->dev);
if (dev->sysfs_rx_queue_group) {
error = sysfs_create_group(kobj, dev->sysfs_rx_queue_group);
if (error) {
@@ -926,7 +928,6 @@ static int rx_queue_add_kobject(struct net_device *dev, int index)
}
kobject_uevent(kobj, KOBJ_ADD);
dev_hold(queue->dev);
return error;
}
@@ -1327,6 +1328,8 @@ static int netdev_queue_add_kobject(struct net_device *dev, int index)
if (error)
return error;
dev_hold(queue->dev);
#ifdef CONFIG_BQL
error = sysfs_create_group(kobj, &dql_group);
if (error) {
@@ -1336,7 +1339,6 @@ static int netdev_queue_add_kobject(struct net_device *dev, int index)
#endif
kobject_uevent(kobj, KOBJ_ADD);
dev_hold(queue->dev);
return 0;
}

4
net/dccp/ipv6.c
View File

@@ -433,8 +433,8 @@ static struct sock *dccp_v6_request_recv_sock(const struct sock *sk,
newnp->ipv6_mc_list = NULL;
newnp->ipv6_ac_list = NULL;
newnp->ipv6_fl_list = NULL;
newnp->mcast_oif = inet6_iif(skb);
newnp->mcast_hops = ipv6_hdr(skb)->hop_limit;
newnp->mcast_oif = inet_iif(skb);
newnp->mcast_hops = ip_hdr(skb)->ttl;
/*
* No need to charge this sock to the relevant IPv6 refcnt debug socks count

8
net/ipv6/tcp_ipv6.c
View File

@@ -1083,11 +1083,11 @@ static struct sock *tcp_v6_syn_recv_sock(const struct sock *sk, struct sk_buff *
newnp->ipv6_fl_list = NULL;
newnp->pktoptions = NULL;
newnp->opt = NULL;
newnp->mcast_oif = tcp_v6_iif(skb);
newnp->mcast_hops = ipv6_hdr(skb)->hop_limit;
newnp->rcv_flowinfo = ip6_flowinfo(ipv6_hdr(skb));
newnp->mcast_oif = inet_iif(skb);
newnp->mcast_hops = ip_hdr(skb)->ttl;
newnp->rcv_flowinfo = 0;
if (np->repflow)
newnp->flow_label = ip6_flowlabel(ipv6_hdr(skb));
newnp->flow_label = 0;
/*
* No need to charge this sock to the relevant IPv6 refcnt debug socks count

3
net/netlink/genetlink.c
View File

@@ -365,7 +365,7 @@ int genl_register_family(struct genl_family *family)
start, end + 1, GFP_KERNEL);
if (family->id < 0) {
err = family->id;
goto errout_locked;
goto errout_free;
}
err = genl_validate_assign_mc_groups(family);
@@ -384,6 +384,7 @@ int genl_register_family(struct genl_family *family)
errout_remove:
idr_remove(&genl_fam_idr, family->id);
errout_free:
kfree(family->attrbuf);
errout_locked:
genl_unlock_all();

4
net/packet/af_packet.c
View File

@@ -3281,7 +3281,7 @@ static int packet_create(struct net *net, struct socket *sock, int protocol,
}
mutex_lock(&net->packet.sklist_lock);
sk_add_node_rcu(sk, &net->packet.sklist);
sk_add_node_tail_rcu(sk, &net->packet.sklist);
mutex_unlock(&net->packet.sklist_lock);
preempt_disable();
@@ -4232,7 +4232,7 @@ static struct pgv *alloc_pg_vec(struct tpacket_req *req, int order)
struct pgv *pg_vec;
int i;
pg_vec = kcalloc(block_nr, sizeof(struct pgv), GFP_KERNEL);
pg_vec = kcalloc(block_nr, sizeof(struct pgv), GFP_KERNEL | __GFP_NOWARN);
if (unlikely(!pg_vec))
goto out;

21
net/rose/rose_subr.c
View File

@@ -105,16 +105,17 @@ void rose_write_internal(struct sock *sk, int frametype)
struct sk_buff *skb;
unsigned char *dptr;
unsigned char lci1, lci2;
char buffer[100];
int len, faclen = 0;
int maxfaclen = 0;
int len, faclen;
int reserve;
len = AX25_BPQ_HEADER_LEN + AX25_MAX_HEADER_LEN + ROSE_MIN_LEN + 1;
reserve = AX25_BPQ_HEADER_LEN + AX25_MAX_HEADER_LEN + 1;
len = ROSE_MIN_LEN;
switch (frametype) {
case ROSE_CALL_REQUEST:
len += 1 + ROSE_ADDR_LEN + ROSE_ADDR_LEN;
faclen = rose_create_facilities(buffer, rose);
len += faclen;
maxfaclen = 256;
break;
case ROSE_CALL_ACCEPTED:
case ROSE_CLEAR_REQUEST:
@@ -123,15 +124,16 @@ void rose_write_internal(struct sock *sk, int frametype)
break;
}
if ((skb = alloc_skb(len, GFP_ATOMIC)) == NULL)
skb = alloc_skb(reserve + len + maxfaclen, GFP_ATOMIC);
if (!skb)
return;
/*
* Space for AX.25 header and PID.
*/
skb_reserve(skb, AX25_BPQ_HEADER_LEN + AX25_MAX_HEADER_LEN + 1);
skb_reserve(skb, reserve);
dptr = skb_put(skb, skb_tailroom(skb));
dptr = skb_put(skb, len);
lci1 = (rose->lci >> 8) & 0x0F;
lci2 = (rose->lci >> 0) & 0xFF;
@@ -146,7 +148,8 @@ void rose_write_internal(struct sock *sk, int frametype)
dptr += ROSE_ADDR_LEN;
memcpy(dptr, &rose->source_addr, ROSE_ADDR_LEN);
dptr += ROSE_ADDR_LEN;
memcpy(dptr, buffer, faclen);
faclen = rose_create_facilities(dptr, rose);
skb_put(skb, faclen);
dptr += faclen;
break;

2
scripts/mod/modpost.c
View File

@@ -645,7 +645,7 @@ static void handle_modversions(struct module *mod, struct elf_info *info,
info->sechdrs[sym->st_shndx].sh_offset -
(info->hdr->e_type != ET_REL ?
info->sechdrs[sym->st_shndx].sh_addr : 0);
crc = *crcp;
crc = TO_NATIVE(*crcp);
}
sym_update_crc(symname + strlen(CRC_PFX), mod, crc,
export);

43
sound/core/oss/pcm_oss.c
View File

@@ -940,6 +940,28 @@ static int snd_pcm_oss_change_params_locked(struct snd_pcm_substream *substream)
oss_frame_size = snd_pcm_format_physical_width(params_format(params)) *
params_channels(params) / 8;
err = snd_pcm_oss_period_size(substream, params, sparams);
if (err < 0)
goto failure;
n = snd_pcm_plug_slave_size(substream, runtime->oss.period_bytes / oss_frame_size);
err = snd_pcm_hw_param_near(substream, sparams, SNDRV_PCM_HW_PARAM_PERIOD_SIZE, n, NULL);
if (err < 0)
goto failure;
err = snd_pcm_hw_param_near(substream, sparams, SNDRV_PCM_HW_PARAM_PERIODS,
runtime->oss.periods, NULL);
if (err < 0)
goto failure;
snd_pcm_kernel_ioctl(substream, SNDRV_PCM_IOCTL_DROP, NULL);
err = snd_pcm_kernel_ioctl(substream, SNDRV_PCM_IOCTL_HW_PARAMS, sparams);
if (err < 0) {
pcm_dbg(substream->pcm, "HW_PARAMS failed: %i\n", err);
goto failure;
}
#ifdef CONFIG_SND_PCM_OSS_PLUGINS
snd_pcm_oss_plugin_clear(substream);
if (!direct) {
@@ -974,27 +996,6 @@ static int snd_pcm_oss_change_params_locked(struct snd_pcm_substream *substream)
}
#endif
err = snd_pcm_oss_period_size(substream, params, sparams);
if (err < 0)
goto failure;
n = snd_pcm_plug_slave_size(substream, runtime->oss.period_bytes / oss_frame_size);
err = snd_pcm_hw_param_near(substream, sparams, SNDRV_PCM_HW_PARAM_PERIOD_SIZE, n, NULL);
if (err < 0)
goto failure;
err = snd_pcm_hw_param_near(substream, sparams, SNDRV_PCM_HW_PARAM_PERIODS,
runtime->oss.periods, NULL);
if (err < 0)
goto failure;
snd_pcm_kernel_ioctl(substream, SNDRV_PCM_IOCTL_DROP, NULL);
if ((err = snd_pcm_kernel_ioctl(substream, SNDRV_PCM_IOCTL_HW_PARAMS, sparams)) < 0) {
pcm_dbg(substream->pcm, "HW_PARAMS failed: %i\n", err);
goto failure;
}
if (runtime->oss.trigger) {
sw_params->start_threshold = 1;
} else {

9
sound/core/pcm_native.c
View File

@@ -1395,8 +1395,15 @@ static int snd_pcm_pause(struct snd_pcm_substream *substream, int push)
static int snd_pcm_pre_suspend(struct snd_pcm_substream *substream, int state)
{
struct snd_pcm_runtime *runtime = substream->runtime;
if (runtime->status->state == SNDRV_PCM_STATE_SUSPENDED)
switch (runtime->status->state) {
case SNDRV_PCM_STATE_SUSPENDED:
return -EBUSY;
/* unresumable PCM state; return -EBUSY for skipping suspend */
case SNDRV_PCM_STATE_OPEN:
case SNDRV_PCM_STATE_SETUP:
case SNDRV_PCM_STATE_DISCONNECTED:
return -EBUSY;
}
runtime->trigger_master = substream;
return 0;
}

Some files were not shown because too many files have changed in this diff Show More