Add support for the Adiantum encryption mode. Adiantum was designed by
Paul Crowley and is specified by our paper:
Adiantum: length-preserving encryption for entry-level processors
(https://eprint.iacr.org/2018/720.pdf)
See our paper for full details; this patch only provides an overview.
Adiantum is a tweakable, length-preserving encryption mode designed for
fast and secure disk encryption, especially on CPUs without dedicated
crypto instructions. Adiantum encrypts each sector using the XChaCha12
stream cipher, two passes of an ε-almost-∆-universal (εA∆U) hash
function, and an invocation of the AES-256 block cipher on a single
16-byte block. On CPUs without AES instructions, Adiantum is much
faster than AES-XTS; for example, on ARM Cortex-A7, on 4096-byte sectors
Adiantum encryption is about 4 times faster than AES-256-XTS encryption,
and decryption about 5 times faster.
Adiantum is a specialization of the more general HBSH construction. Our
earlier proposal, HPolyC, was also a HBSH specialization, but it used a
different εA∆U hash function, one based on Poly1305 only. Adiantum's
εA∆U hash function, which is based primarily on the "NH" hash function
like that used in UMAC (RFC4418), is about twice as fast as HPolyC's;
consequently, Adiantum is about 20% faster than HPolyC.
This speed comes with no loss of security: Adiantum is provably just as
secure as HPolyC, in fact slightly *more* secure. Like HPolyC,
Adiantum's security is reducible to that of XChaCha12 and AES-256,
subject to a security bound. XChaCha12 itself has a security reduction
to ChaCha12. Therefore, one need not "trust" Adiantum; one need only
trust ChaCha12 and AES-256. Note that the εA∆U hash function is only
used for its proven combinatorical properties so cannot be "broken".
Adiantum is also a true wide-block encryption mode, so flipping any
plaintext bit in the sector scrambles the entire ciphertext, and vice
versa. No other such mode is available in the kernel currently; doing
the same with XTS scrambles only 16 bytes. Adiantum also supports
arbitrary-length tweaks and naturally supports any length input >= 16
bytes without needing "ciphertext stealing".
For the stream cipher, Adiantum uses XChaCha12 rather than XChaCha20 in
order to make encryption feasible on the widest range of devices.
Although the 20-round variant is quite popular, the best known attacks
on ChaCha are on only 7 rounds, so ChaCha12 still has a substantial
security margin; in fact, larger than AES-256's. 12-round Salsa20 is
also the eSTREAM recommendation. For the block cipher, Adiantum uses
AES-256, despite it having a lower security margin than XChaCha12 and
needing table lookups, due to AES's extensive adoption and analysis
making it the obvious first choice. Nevertheless, for flexibility this
patch also permits the "adiantum" template to be instantiated with
XChaCha20 and/or with an alternate block cipher.
We need Adiantum support in the kernel for use in dm-crypt and fscrypt,
where currently the only other suitable options are block cipher modes
such as AES-XTS. A big problem with this is that many low-end mobile
devices (e.g. Android Go phones sold primarily in developing countries,
as well as some smartwatches) still have CPUs that lack AES
instructions, e.g. ARM Cortex-A7. Sadly, AES-XTS encryption is much too
slow to be viable on these devices. We did find that some "lightweight"
block ciphers are fast enough, but these suffer from problems such as
not having much cryptanalysis or being too controversial.
The ChaCha stream cipher has excellent performance but is insecure to
use directly for disk encryption, since each sector's IV is reused each
time it is overwritten. Even restricting the threat model to offline
attacks only isn't enough, since modern flash storage devices don't
guarantee that "overwrites" are really overwrites, due to wear-leveling.
Adiantum avoids this problem by constructing a
"tweakable super-pseudorandom permutation"; this is the strongest
possible security model for length-preserving encryption.
Of course, storing random nonces along with the ciphertext would be the
ideal solution. But doing that with existing hardware and filesystems
runs into major practical problems; in most cases it would require data
journaling (like dm-integrity) which severely degrades performance.
Thus, for now length-preserving encryption is still needed.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 059c2a4d8e164dccc3078e49e7f286023b019a98
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Conflicts:
crypto/tcrypt.c
crypto/testmgr.c
(adjusted test vector formatting for old testmgr)
Bug: 112008522
Test: Among other things, I ran the relevant crypto self-tests:
1.) Build kernel with CONFIG_CRYPTO_MANAGER_DISABLE_TESTS *unset*, and
all relevant crypto algorithms built-in, including:
CONFIG_CRYPTO_ADIANTUM=y
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_CHACHA20_NEON=y
CONFIG_CRYPTO_NHPOLY1305=y
CONFIG_CRYPTO_NHPOLY1305_NEON=y
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_ARM=y
2.) Boot and check dmesg for test failures.
3.) Instantiate "adiantum(xchacha12,aes)" and
"adiantum(xchacha20,aes)" to trigger them to be tested. There are
many ways to do this, but one way is to create a dm-crypt target
that uses them, e.g.
key=$(hexdump -n 32 -e '16/4 "%08X" 1 "\n"' /dev/urandom)
dmsetup create crypt --table "0 $((1<<17)) crypt xchacha12,aes-adiantum-plain64 $key 0 /dev/vdc 0"
dmsetup remove crypt
dmsetup create crypt --table "0 $((1<<17)) crypt xchacha20,aes-adiantum-plain64 $key 0 /dev/vdc 0"
dmsetup remove crypt
4.) Check dmesg for test failures again.
5.) Do 1-4 on both x86_64 (for basic testing) and on arm32 (for
testing the ARM32-specific implementations). I did the arm32 kernel
testing on Raspberry Pi 2, which is a BCM2836-based device that can
run the upstream and Android common kernels.
The same ARM32 assembly files for ChaCha, NHPoly1305, and AES are
also included in the userspace Adiantum benchmark suite at
https://github.com/google/adiantum, where they have undergone
additional correctness testing.
Change-Id: Ic61c13b53facfd2173065be715a7ee5f3af8760b
Signed-off-by: Eric Biggers <ebiggers@google.com>
Add a generic implementation of NHPoly1305, an ε-almost-∆-universal hash
function used in the Adiantum encryption mode.
CONFIG_NHPOLY1305 is not selectable by itself since there won't be any
real reason to enable it without also enabling Adiantum support.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 26609a21a9460145e37d90947ad957b358a05288
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Conflicts:
crypto/testmgr.c
crypto/testmgr.h
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: If6f00c01fab530fc2458c44ca111f84604cb85c1
Signed-off-by: Eric Biggers <ebiggers@google.com>
In preparation for adding XChaCha12 support, rename/refactor
chacha20-generic to support different numbers of rounds. The
justification for needing XChaCha12 support is explained in more detail
in the patch "crypto: chacha - add XChaCha12 support".
The only difference between ChaCha{8,12,20} are the number of rounds
itself; all other parts of the algorithm are the same. Therefore,
remove the "20" from all definitions, structures, functions, files, etc.
that will be shared by all ChaCha versions.
Also make ->setkey() store the round count in the chacha_ctx (previously
chacha20_ctx). The generic code then passes the round count through to
chacha_block(). There will be a ->setkey() function for each explicitly
allowed round count; the encrypt/decrypt functions will be the same. I
decided not to do it the opposite way (same ->setkey() function for all
round counts, with different encrypt/decrypt functions) because that
would have required more boilerplate code in architecture-specific
implementations of ChaCha and XChaCha.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 1ca1b917940c24ca3d1f490118c5474168622953
https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Conflicts:
arch/arm64/crypto/chacha20-neon-glue.c
arch/x86/crypto/chacha20_glue.c
drivers/crypto/caam/caamalg.c
drivers/crypto/caam/caamalg_qi2.c
drivers/crypto/caam/compat.h
include/crypto/chacha20.h
Bug: 112008522
Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b
Change-Id: I7fa203ddc7095ce8675a32f49b8a5230cd0cf5f6
Signed-off-by: Eric Biggers <ebiggers@google.com>
Changes in 4.14.71
i2c: xiic: Make the start and the byte count write atomic
i2c: i801: fix DNV's SMBCTRL register offset
scsi: lpfc: Correct MDS diag and nvmet configuration
nbd: don't allow invalid blocksize settings
block: bfq: swap puts in bfqg_and_blkg_put
android: binder: fix the race mmap and alloc_new_buf_locked
MIPS: VDSO: Match data page cache colouring when D$ aliases
SMB3: Backup intent flag missing for directory opens with backupuid mounts
smb3: check for and properly advertise directory lease support
Btrfs: fix data corruption when deduplicating between different files
KVM: s390: vsie: copy wrapping keys to right place
KVM: VMX: Do not allow reexecute_instruction() when skipping MMIO instr
ALSA: hda - Fix cancel_work_sync() stall from jackpoll work
cpu/hotplug: Adjust misplaced smb() in cpuhp_thread_fun()
cpu/hotplug: Prevent state corruption on error rollback
x86/microcode: Make sure boot_cpu_data.microcode is up-to-date
x86/microcode: Update the new microcode revision unconditionally
switchtec: Fix Spectre v1 vulnerability
crypto: aes-generic - fix aes-generic regression on powerpc
tpm: separate cmd_ready/go_idle from runtime_pm
ARC: [plat-axs*]: Enable SWAP
misc: mic: SCIF Fix scif_get_new_port() error handling
ethtool: Remove trailing semicolon for static inline
i2c: aspeed: Add an explicit type casting for *get_clk_reg_val
Bluetooth: h5: Fix missing dependency on BT_HCIUART_SERDEV
gpio: tegra: Move driver registration to subsys_init level
powerpc/powernv: Fix concurrency issue with npu->mmio_atsd_usage
selftests/bpf: fix a typo in map in map test
media: davinci: vpif_display: Mix memory leak on probe error path
media: dw2102: Fix memleak on sequence of probes
net: phy: Fix the register offsets in Broadcom iProc mdio mux driver
blk-mq: fix updating tags depth
scsi: target: fix __transport_register_session locking
md/raid5: fix data corruption of replacements after originals dropped
timers: Clear timer_base::must_forward_clk with timer_base::lock held
media: camss: csid: Configure data type and decode format properly
gpu: ipu-v3: default to id 0 on missing OF alias
misc: ti-st: Fix memory leak in the error path of probe()
uio: potential double frees if __uio_register_device() fails
firmware: vpd: Fix section enabled flag on vpd_section_destroy
Drivers: hv: vmbus: Cleanup synic memory free path
tty: rocket: Fix possible buffer overwrite on register_PCI
f2fs: fix to active page in lru list for read path
f2fs: do not set free of current section
f2fs: fix defined but not used build warnings
perf tools: Allow overriding MAX_NR_CPUS at compile time
NFSv4.0 fix client reference leak in callback
perf c2c report: Fix crash for empty browser
perf evlist: Fix error out while applying initial delay and LBR
macintosh/via-pmu: Add missing mmio accessors
ath9k: report tx status on EOSP
ath9k_hw: fix channel maximum power level test
ath10k: prevent active scans on potential unusable channels
wlcore: Set rx_status boottime_ns field on rx
rpmsg: core: add support to power domains for devices
MIPS: Fix ISA virt/bus conversion for non-zero PHYS_OFFSET
ata: libahci: Allow reconfigure of DEVSLP register
ata: libahci: Correct setting of DEVSLP register
scsi: 3ware: fix return 0 on the error path of probe
tools/testing/nvdimm: kaddr and pfn can be NULL to ->direct_access()
ath10k: disable bundle mgmt tx completion event support
Bluetooth: hidp: Fix handling of strncpy for hid->name information
x86/mm: Remove in_nmi() warning from vmalloc_fault()
pinctrl: imx: off by one in imx_pinconf_group_dbg_show()
gpio: ml-ioh: Fix buffer underwrite on probe error path
pinctrl/amd: only handle irq if it is pending and unmasked
net: mvneta: fix mtu change on port without link
f2fs: try grabbing node page lock aggressively in sync scenario
pktcdvd: Fix possible Spectre-v1 for pkt_devs
f2fs: fix to skip GC if type in SSA and SIT is inconsistent
tpm_tis_spi: Pass the SPI IRQ down to the driver
tpm/tpm_i2c_infineon: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT)
f2fs: fix to do sanity check with reserved blkaddr of inline inode
MIPS: Octeon: add missing of_node_put()
MIPS: generic: fix missing of_node_put()
net: dcb: For wild-card lookups, use priority -1, not 0
dm cache: only allow a single io_mode cache feature to be requested
Input: atmel_mxt_ts - only use first T9 instance
media: s5p-mfc: Fix buffer look up in s5p_mfc_handle_frame_{new, copy_time} functions
partitions/aix: append null character to print data from disk
partitions/aix: fix usage of uninitialized lv_info and lvname structures
media: helene: fix xtal frequency setting at power on
f2fs: fix to wait on page writeback before updating page
f2fs: Fix uninitialized return in f2fs_ioc_shutdown()
iommu/ipmmu-vmsa: Fix allocation in atomic context
mfd: ti_am335x_tscadc: Fix struct clk memory leak
f2fs: fix to do sanity check with {sit,nat}_ver_bitmap_bytesize
NFSv4.1: Fix a potential layoutget/layoutrecall deadlock
MIPS: WARN_ON invalid DMA cache maintenance, not BUG_ON
RDMA/cma: Do not ignore net namespace for unbound cm_id
drm/i915: set DP Main Stream Attribute for color range on DDI platforms
inet: frags: change inet_frags_init_net() return value
inet: frags: add a pointer to struct netns_frags
inet: frags: refactor ipfrag_init()
inet: frags: Convert timers to use timer_setup()
inet: frags: refactor ipv6_frag_init()
inet: frags: refactor lowpan_net_frag_init()
ipv6: export ip6 fragments sysctl to unprivileged users
rhashtable: add schedule points
inet: frags: use rhashtables for reassembly units
inet: frags: remove some helpers
inet: frags: get rif of inet_frag_evicting()
inet: frags: remove inet_frag_maybe_warn_overflow()
inet: frags: break the 2GB limit for frags storage
inet: frags: do not clone skb in ip_expire()
ipv6: frags: rewrite ip6_expire_frag_queue()
rhashtable: reorganize struct rhashtable layout
inet: frags: reorganize struct netns_frags
inet: frags: get rid of ipfrag_skb_cb/FRAG_CB
inet: frags: fix ip6frag_low_thresh boundary
ip: discard IPv4 datagrams with overlapping segments.
net: speed up skb_rbtree_purge()
net: modify skb_rbtree_purge to return the truesize of all purged skbs.
ipv6: defrag: drop non-last frags smaller than min mtu
net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends
net: add rb_to_skb() and other rb tree helpers
net: sk_buff rbnode reorg
ipv4: frags: precedence bug in ip_expire()
ip: add helpers to process in-order fragments faster.
ip: process in-order fragments efficiently
ip: frags: fix crash in ip_do_fragment()
mtd: ubi: wl: Fix error return code in ubi_wl_init()
tun: fix use after free for ptr_ring
tuntap: fix use after free during release
autofs: fix autofs_sbi() does not check super block type
mm: get rid of vmacache_flush_all() entirely
Linux 4.14.71
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 6e36719fbe90213fbba9f50093fa2d4d69b0e93c upstream.
My last bugfix added -Os on the command line, which unfortunately caused
a build regression on powerpc in some configurations.
I've done some more analysis of the original problem and found slightly
different workaround that avoids this regression and also results in
better performance on gcc-7.0: -fcode-hoisting is an optimization step
that got added in gcc-7 and that for all gcc-7 versions causes worse
performance.
This disables -fcode-hoisting on all compilers that understand the option.
For gcc-7.1 and 7.2 I found the same performance as my previous patch
(using -Os), in gcc-7.0 it was even better. On gcc-8 I could see no
change in performance from this patch. In theory, code hoisting should
not be able make things better for the AES cipher, so leaving it
disabled for gcc-8 only serves to simplify the Makefile change.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Link: https://www.mail-archive.com/linux-crypto@vger.kernel.org/msg30418.html
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83356
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83651
Fixes: 148b974deea9 ("crypto: aes-generic - build with -Os on gcc-7+")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds zstd support to crypto and scompress. Only supports the default
level.
Previously we held off on this patch, since there weren't any users.
Now zram is ready for zstd support, but depends on CONFIG_CRYPTO_ZSTD,
which isn't defined until this patch is in. I also see a patch adding
zstd to pstore [0], which depends on crypto zstd.
[0] lkml.kernel.org/r/9c9416b2dff19f05fb4c35879aaa83d11ff72c92.1521626182.git.geliangtang@gmail.com
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit d28fc3dbe1918333730d62aa5f0d84b6fb4e7254)
Signed-off-by: Peter Kalauskas <peskal@google.com>
Bug: 112488418
Change-Id: Iaa0afe93fe645b6cf2b8d9e29144096bee8b2c67
Changes in 4.14.34
i40iw: Fix sequence number for the first partial FPDU
i40iw: Correct Q1/XF object count equation
i40iw: Validate correct IRD/ORD connection parameters
clk: meson: mpll: use 64-bit maths in params_from_rate
ARM: dts: ls1021a: add "fsl,ls1021a-esdhc" compatible string to esdhc node
Bluetooth: Add a new 04ca:3015 QCA_ROME device
ipv6: Reinject IPv6 packets if IPsec policy matches after SNAT
thermal: power_allocator: fix one race condition issue for thermal_instances list
perf probe: Find versioned symbols from map
perf probe: Add warning message if there is unexpected event name
perf evsel: Enable ignore_missing_thread for pid option
net: hns3: free the ring_data structrue when change tqps
net: hns3: fix for getting auto-negotiation state in hclge_get_autoneg
l2tp: fix missing print session offset info
rds; Reset rs->rs_bound_addr in rds_add_bound() failure path
ACPI / video: Default lcd_only to true on Win8-ready and newer machines
net/mlx4_en: Change default QoS settings
VFS: close race between getcwd() and d_move()
watchdog: dw_wdt: add stop watchdog operation
clk: divider: fix incorrect usage of container_of
PM / devfreq: Fix potential NULL pointer dereference in governor_store
selftests/net: fix bugs in address and port initialization
RDMA/cma: Mark end of CMA ID messages
hwmon: (ina2xx) Make calibration register value fixed
clk: sunxi-ng: a83t: Add M divider to TCON1 clock
media: videobuf2-core: don't go out of the buffer range
ASoC: Intel: Skylake: Disable clock gating during firmware and library download
ASoC: Intel: cht_bsw_rt5645: Analog Mic support
spi: sh-msiof: Fix timeout failures for TX-only DMA transfers
scsi: libiscsi: Allow sd_shutdown on bad transport
scsi: mpt3sas: Proper handling of set/clear of "ATA command pending" flag.
irqchip/gic-v3: Fix the driver probe() fail due to disabled GICC entry
ACPI: EC: Fix debugfs_create_*() usage
mac80211: Fix setting TX power on monitor interfaces
vfb: fix video mode and line_length being set when loaded
gpio: label descriptors using the device name
powernv-cpufreq: Add helper to extract pstate from PMSR
IB/rdmavt: Allocate CQ memory on the correct node
blk-mq: avoid to map CPU into stale hw queue
blk-mq: fix race between updating nr_hw_queues and switching io sched
backlight: tdo24m: Fix the SPI CS between transfers
pinctrl: baytrail: Enable glitch filter for GPIOs used as interrupts
nvme_fcloop: disassocate local port structs
nvme_fcloop: fix abort race condition
tpm: return a TPM_RC_COMMAND_CODE response if command is not implemented
perf report: Fix a no annotate browser displayed issue
staging: lustre: disable preempt while sampling processor id.
ASoC: Intel: sst: Fix the return value of 'sst_send_byte_stream_mrfld()'
power: supply: axp288_charger: Properly stop work on probe-error / remove
rt2x00: do not pause queue unconditionally on error path
wl1251: check return from call to wl1251_acx_arp_ip_filter
net/mlx5: Fix race for multiple RoCE enable
net: hns3: Fix an error of total drop packet statistics
net: hns3: Fix a loop index error of tqp statistics query
net: hns3: Fix an error macro definition of HNS3_TQP_STAT
net: hns3: fix for changing MTU
bcache: ret IOERR when read meets metadata error
bcache: stop writeback thread after detaching
bcache: segregate flash only volume write streams
scsi: libsas: fix memory leak in sas_smp_get_phy_events()
scsi: libsas: fix error when getting phy events
scsi: libsas: initialize sas_phy status according to response of DISCOVER
blk-mq: fix kernel oops in blk_mq_tag_idle()
tty: n_gsm: Allow ADM response in addition to UA for control dlci
block, bfq: put async queues for root bfq groups too
EDAC, mv64x60: Fix an error handling path
uio_hv_generic: check that host supports monitor page
i40evf: don't rely on netif_running() outside rtnl_lock()
cxgb4vf: Fix SGE FL buffer initialization logic for 64K pages
scsi: megaraid_sas: Error handling for invalid ldcount provided by firmware in RAID map
scsi: megaraid_sas: unload flag should be set after scsi_remove_host is called
RDMA/cma: Fix rdma_cm path querying for RoCE
gpio: thunderx: fix error return code in thunderx_gpio_probe()
x86/gart: Exclude GART aperture from vmcore
sdhci: Advertise 2.0v supply on SDIO host controller
ibmvnic: Don't handle RX interrupts when not up.
Input: goodix - disable IRQs while suspended
mtd: mtd_oobtest: Handle bitflips during reads
crypto: aes-generic - build with -Os on gcc-7+
perf tools: Fix copyfile_offset update of output offset
tcmu: release blocks for partially setup cmds
thermal: int3400_thermal: fix error handling in int3400_thermal_probe()
objtool: Add Clang support
crypto: arm64/aes-ce-cipher - move assembler code to .S file
x86/microcode: Propagate return value from updating functions
x86/CPU: Add a microcode loader callback
x86/CPU: Check CPU feature bits after microcode upgrade
x86/microcode: Get rid of struct apply_microcode_ctx
x86/microcode/intel: Check microcode revision before updating sibling threads
x86/microcode/intel: Writeback and invalidate caches before updating microcode
x86/microcode: Do not upload microcode if CPUs are offline
x86/microcode/intel: Look into the patch cache first
x86/microcode: Request microcode on the BSP
x86/microcode: Synchronize late microcode loading
x86/microcode: Attempt late loading only when new microcode is present
x86/microcode: Fix CPU synchronization routine
arp: fix arp_filter on l3slave devices
ipv6: the entire IPv6 header chain must fit the first fragment
lan78xx: Crash in lan78xx_writ_reg (Workqueue: events lan78xx_deferred_multicast_write)
net: fix possible out-of-bound read in skb_network_protocol()
net/ipv6: Fix route leaking between VRFs
net/ipv6: Increment OUTxxx counters after netfilter hook
netlink: make sure nladdr has correct size in netlink_connect()
net sched actions: fix dumping which requires several messages to user space
net/sched: fix NULL dereference in the error path of tcf_bpf_init()
pptp: remove a buggy dst release in pptp_connect()
r8169: fix setting driver_data after register_netdev
sctp: do not leak kernel memory to user space
sctp: sctp_sockaddr_af must check minimal addr length for AF_INET6
sky2: Increase D3 delay to sky2 stops working after suspend
vhost: correctly remove wait queue during poll failure
vlan: also check phy_driver ts_info for vlan's real device
vrf: Fix use after free and double free in vrf_finish_output
bonding: fix the err path for dev hwaddr sync in bond_enslave
bonding: move dev_mc_sync after master_upper_dev_link in bond_enslave
bonding: process the err returned by dev_set_allmulti properly in bond_enslave
net: fool proof dev_valid_name()
ip_tunnel: better validate user provided tunnel names
ipv6: sit: better validate user provided tunnel names
ip6_gre: better validate user provided tunnel names
ip6_tunnel: better validate user provided tunnel names
vti6: better validate user provided tunnel names
net/mlx5e: Avoid using the ipv6 stub in the TC offload neigh update path
net/mlx5e: Fix memory usage issues in offloading TC flows
nfp: use full 40 bits of the NSP buffer address
ipv6: sr: fix seg6 encap performances with TSO enabled
net/mlx5e: Don't override vport admin link state in switchdev mode
net/mlx5e: Sync netdev vxlan ports at open
net/sched: fix NULL dereference in the error path of tunnel_key_init()
net/sched: fix NULL dereference on the error path of tcf_skbmod_init()
strparser: Fix sign of err codes
net/mlx4_en: Fix mixed PFC and Global pause user control requests
net/mlx5e: Fix traffic being dropped on VF representor
vhost: validate log when IOTLB is enabled
route: check sysctl_fib_multipath_use_neigh earlier than hash
team: move dev_mc_sync after master_upper_dev_link in team_port_add
vhost_net: add missing lock nesting notation
net/mlx4_core: Fix memory leak while delete slave's resources
Linux 4.14.34
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit 148b974deea927f5dbb6c468af2707b488bfa2de ]
While testing other changes, I discovered that gcc-7.2.1 produces badly
optimized code for aes_encrypt/aes_decrypt. This is especially true when
CONFIG_UBSAN_SANITIZE_ALL is enabled, where it leads to extremely
large stack usage that in turn might cause kernel stack overflows:
crypto/aes_generic.c: In function 'aes_encrypt':
crypto/aes_generic.c:1371:1: warning: the frame size of 4880 bytes is larger than 2048 bytes [-Wframe-larger-than=]
crypto/aes_generic.c: In function 'aes_decrypt':
crypto/aes_generic.c:1441:1: warning: the frame size of 4864 bytes is larger than 2048 bytes [-Wframe-larger-than=]
I verified that this problem exists on all architectures that are
supported by gcc-7.2, though arm64 in particular is less affected than
the others. I also found that gcc-7.1 and gcc-8 do not show the extreme
stack usage but still produce worse code than earlier versions for this
file, apparently because of optimization passes that generally provide
a substantial improvement in object code quality but understandably fail
to find any shortcuts in the AES algorithm.
Possible workarounds include
a) disabling -ftree-pre and -ftree-sra optimizations, this was an earlier
patch I tried, which reliably fixed the stack usage, but caused a
serious performance regression in some versions, as later testing
found.
b) disabling UBSAN on this file or all ciphers, as suggested by Ard
Biesheuvel. This would lead to massively better crypto performance in
UBSAN-enabled kernels and avoid the stack usage, but there is a concern
over whether we should exclude arbitrary files from UBSAN at all.
c) Forcing the optimization level in a different way. Similar to a),
but rather than deselecting specific optimization stages,
this now uses "gcc -Os" for this file, regardless of the
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE/SIZE option. This is a reliable
workaround for the stack consumption on all architecture, and I've
retested the performance results now on x86, cycles/byte (lower is
better) for cbc(aes-generic) with 256 bit keys:
-O2 -Os
gcc-6.3.1 14.9 15.1
gcc-7.0.1 14.7 15.3
gcc-7.1.1 15.3 14.7
gcc-7.2.1 16.8 15.9
gcc-8.0.0 15.5 15.6
This implements the option c) by enabling forcing -Os on all compiler
versions starting with gcc-7.1. As a workaround for PR83356, it would
only be needed for gcc-7.2+ with UBSAN enabled, but since it also shows
better performance on gcc-7.1 without UBSAN, it seems appropriate to
use the faster version here as well.
Side note: during testing, I also played with the AES code in libressl,
which had a similar performance regression from gcc-6 to gcc-7.2,
but was three times slower overall. It might be interesting to
investigate that further and possibly port the Linux implementation
into that.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83356
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83651
Cc: Richard Biener <rguenther@suse.de>
Cc: Jakub Jelinek <jakub@gcc.gnu.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a generic implementation of Speck, including the Speck128 and
Speck64 variants. Speck is a lightweight block cipher that can be much
faster than AES on processors that don't have AES instructions.
We are planning to offer Speck-XTS (probably Speck128/256-XTS) as an
option for dm-crypt and fscrypt on Android, for low-end mobile devices
with older CPUs such as ARMv7 which don't have the Cryptography
Extensions. Currently, such devices are unencrypted because AES is not
fast enough, even when the NEON bit-sliced implementation of AES is
used. Other AES alternatives such as Twofish, Threefish, Camellia,
CAST6, and Serpent aren't fast enough either; it seems that only a
modern ARX cipher can provide sufficient performance on these devices.
This is a replacement for our original proposal
(https://patchwork.kernel.org/patch/10101451/) which was to offer
ChaCha20 for these devices. However, the use of a stream cipher for
disk/file encryption with no space to store nonces would have been much
more insecure than we thought initially, given that it would be used on
top of flash storage as well as potentially on top of F2FS, neither of
which is guaranteed to overwrite data in-place.
Speck has been somewhat controversial due to its origin. Nevertheless,
it has a straightforward design (it's an ARX cipher), and it appears to
be the leading software-optimized lightweight block cipher currently,
with the most cryptanalysis. It's also easy to implement without side
channels, unlike AES. Moreover, we only intend Speck to be used when
the status quo is no encryption, due to AES not being fast enough.
We've also considered a novel length-preserving encryption mode based on
ChaCha20 and Poly1305. While theoretically attractive, such a mode
would be a brand new crypto construction and would be more complicated
and difficult to implement efficiently in comparison to Speck-XTS.
There is confusion about the byte and word orders of Speck, since the
original paper doesn't specify them. But we have implemented it using
the orders the authors recommended in a correspondence with them. The
test vectors are taken from the original paper but were mapped to byte
arrays using the recommended byte and word orders.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit da7a0ab5b4babbe5d7a46f852582be06a00a28f0
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
Change-Id: Id13c44dee8e3817590950c178d54b24c3aee0b4e
Signed-off-by: Eric Biggers <ebiggers@google.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for generating ecc private keys.
Generation of ecc private keys is helpful in a user-space to kernel
ecdh offload because the keys are not revealed to user-space. Private
key generation is also helpful to implement forward secrecy.
If the user provides a NULL ecc private key, the kernel will generate it
and further use it for ecdh.
Move ecdh's object files below drbg's. drbg must be present in the kernel
at the time of calling.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Stephan Müller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
An ancient gcc bug (first reported in 2003) has apparently resurfaced
on MIPS, where kernelci.org reports an overly large stack frame in the
whirlpool hash algorithm:
crypto/wp512.c:987:1: warning: the frame size of 1112 bytes is larger than 1024 bytes [-Wframe-larger-than=]
With some testing in different configurations, I'm seeing large
variations in stack frames size up to 1500 bytes for what should have
around 300 bytes at most. I also checked the reference implementation,
which is essentially the same code but also comes with some test and
benchmarking infrastructure.
It seems that recent compiler versions on at least arm, arm64 and powerpc
have a partial fix for this problem, but enabling "-fsched-pressure", but
even with that fix they suffer from the issue to a certain degree. Some
testing on arm64 shows that the time needed to hash a given amount of
data is roughly proportional to the stack frame size here, which makes
sense given that the wp512 implementation is doing lots of loads for
table lookups, and the problem with the overly large stack is a result
of doing a lot more loads and stores for spilled registers (as seen from
inspecting the object code).
Disabling -fschedule-insns consistently fixes the problem for wp512,
in my collection of cross-compilers, the results are consistently better
or identical when comparing the stack sizes in this function, though
some architectures (notable x86) have schedule-insns disabled by
default.
The four columns are:
default: -O2
press: -O2 -fsched-pressure
nopress: -O2 -fschedule-insns -fno-sched-pressure
nosched: -O2 -no-schedule-insns (disables sched-pressure)
default press nopress nosched
alpha-linux-gcc-4.9.3 1136 848 1136 176
am33_2.0-linux-gcc-4.9.3 2100 2076 2100 2104
arm-linux-gnueabi-gcc-4.9.3 848 848 1048 352
cris-linux-gcc-4.9.3 272 272 272 272
frv-linux-gcc-4.9.3 1128 1000 1128 280
hppa64-linux-gcc-4.9.3 1128 336 1128 184
hppa-linux-gcc-4.9.3 644 308 644 276
i386-linux-gcc-4.9.3 352 352 352 352
m32r-linux-gcc-4.9.3 720 656 720 268
microblaze-linux-gcc-4.9.3 1108 604 1108 256
mips64-linux-gcc-4.9.3 1328 592 1328 208
mips-linux-gcc-4.9.3 1096 624 1096 240
powerpc64-linux-gcc-4.9.3 1088 432 1088 160
powerpc-linux-gcc-4.9.3 1080 584 1080 224
s390-linux-gcc-4.9.3 456 456 624 360
sh3-linux-gcc-4.9.3 292 292 292 292
sparc64-linux-gcc-4.9.3 992 240 992 208
sparc-linux-gcc-4.9.3 680 592 680 312
x86_64-linux-gcc-4.9.3 224 240 272 224
xtensa-linux-gcc-4.9.3 1152 704 1152 304
aarch64-linux-gcc-7.0.0 224 224 1104 208
arm-linux-gnueabi-gcc-7.0.1 824 824 1048 352
mips-linux-gcc-7.0.0 1120 648 1120 272
x86_64-linux-gcc-7.0.1 240 240 304 240
arm-linux-gnueabi-gcc-4.4.7 840 392
arm-linux-gnueabi-gcc-4.5.4 784 728 784 320
arm-linux-gnueabi-gcc-4.6.4 736 728 736 304
arm-linux-gnueabi-gcc-4.7.4 944 784 944 352
arm-linux-gnueabi-gcc-4.8.5 464 464 760 352
arm-linux-gnueabi-gcc-4.9.3 848 848 1048 352
arm-linux-gnueabi-gcc-5.3.1 824 824 1064 336
arm-linux-gnueabi-gcc-6.1.1 808 808 1056 344
arm-linux-gnueabi-gcc-7.0.1 824 824 1048 352
Trying the same test for serpent-generic, the picture is a bit different,
and while -fno-schedule-insns is generally better here than the default,
-fsched-pressure wins overall, so I picked that instead.
default press nopress nosched
alpha-linux-gcc-4.9.3 1392 864 1392 960
am33_2.0-linux-gcc-4.9.3 536 524 536 528
arm-linux-gnueabi-gcc-4.9.3 552 552 776 536
cris-linux-gcc-4.9.3 528 528 528 528
frv-linux-gcc-4.9.3 536 400 536 504
hppa64-linux-gcc-4.9.3 524 208 524 480
hppa-linux-gcc-4.9.3 768 472 768 508
i386-linux-gcc-4.9.3 564 564 564 564
m32r-linux-gcc-4.9.3 712 576 712 532
microblaze-linux-gcc-4.9.3 724 392 724 512
mips64-linux-gcc-4.9.3 720 384 720 496
mips-linux-gcc-4.9.3 728 384 728 496
powerpc64-linux-gcc-4.9.3 704 304 704 480
powerpc-linux-gcc-4.9.3 704 296 704 480
s390-linux-gcc-4.9.3 560 560 592 536
sh3-linux-gcc-4.9.3 540 540 540 540
sparc64-linux-gcc-4.9.3 544 352 544 496
sparc-linux-gcc-4.9.3 544 344 544 496
x86_64-linux-gcc-4.9.3 528 536 576 528
xtensa-linux-gcc-4.9.3 752 544 752 544
aarch64-linux-gcc-7.0.0 432 432 656 480
arm-linux-gnueabi-gcc-7.0.1 616 616 808 536
mips-linux-gcc-7.0.0 720 464 720 488
x86_64-linux-gcc-7.0.1 536 528 600 536
arm-linux-gnueabi-gcc-4.4.7 592 440
arm-linux-gnueabi-gcc-4.5.4 776 448 776 544
arm-linux-gnueabi-gcc-4.6.4 776 448 776 544
arm-linux-gnueabi-gcc-4.7.4 768 448 768 544
arm-linux-gnueabi-gcc-4.8.5 488 488 776 544
arm-linux-gnueabi-gcc-4.9.3 552 552 776 536
arm-linux-gnueabi-gcc-5.3.1 552 552 776 536
arm-linux-gnueabi-gcc-6.1.1 560 560 776 536
arm-linux-gnueabi-gcc-7.0.1 616 616 808 536
I did not do any runtime tests with serpent, so it is possible that stack
frame size does not directly correlate with runtime performance here and
it actually makes things worse, but it's more likely to help here, and
the reduced stack frame size is probably enough reason to apply the patch,
especially given that the crypto code is often used in deep call chains.
Link: https://kernelci.org/build/id/58797d7559b5149efdf6c3a9/logs/
Link: http://www.larc.usp.br/~pbarreto/WhirlpoolPage.html
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=11488
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=79149
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Lookup table based AES is sensitive to timing attacks, which is due to
the fact that such table lookups are data dependent, and the fact that
8 KB worth of tables covers a significant number of cachelines on any
architecture, resulting in an exploitable correlation between the key
and the processing time for known plaintexts.
For network facing algorithms such as CTR, CCM or GCM, this presents a
security risk, which is why arch specific AES ports are typically time
invariant, either through the use of special instructions, or by using
SIMD algorithms that don't rely on table lookups.
For generic code, this is difficult to achieve without losing too much
performance, but we can improve the situation significantly by switching
to an implementation that only needs 256 bytes of table data (the actual
S-box itself), which can be prefetched at the start of each block to
eliminate data dependent latencies.
This code encrypts at ~25 cycles per byte on ARM Cortex-A57 (while the
ordinary generic AES driver manages 18 cycles per byte on this
hardware). Decryption is substantially slower.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Both asn1 headers are included by rsa_helper.c, so rsa_helper.o
should explicitly depend on them.
Signed-off-by: David Michael <david.michael@coreos.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds the simd skcipher helper which is meant to be
a replacement for ablk helper. It replaces the underlying blkcipher
interface with skcipher, and also presents the top-level algorithm
as an skcipher.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a synchronous back-end (scomp) to acomp. This allows to easily
expose the already present compression algorithms in LKCF via acomp.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch removes the old crypto_grab_skcipher helper and replaces
it with crypto_grab_skcipher2.
As this is the final entry point into givcipher this patch also
removes all traces of the top-level givcipher interface, including
all implicit IV generators such as chainiv.
The bottom-level givcipher interface remains until the drivers
using it are converted.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* Implement ECDH under kpp API
* Provide ECC software support for curve P-192 and
P-256.
* Add kpp test for ECDH with data generated by OpenSSL
Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add key-agreement protocol primitives (kpp) API which allows to
implement primitives required by protocols such as DH and ECDH.
The API is composed mainly by the following functions
* set_secret() - It allows the user to set his secret, also
referred to as his private key, along with the parameters
known to both parties involved in the key-agreement session.
* generate_public_key() - It generates the public key to be sent to
the other counterpart involved in the key-agreement session. The
function has to be called after set_params() and set_secret()
* generate_secret() - It generates the shared secret for the session
Other functions such as init() and exit() are provided for allowing
cryptographic hardware to be inizialized properly before use
Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now block cipher engines need to implement and maintain their own queue/thread
for processing requests, moreover currently helpers provided for only the queue
itself (in crypto_enqueue_request() and crypto_dequeue_request()) but they
don't help with the mechanics of driving the hardware (things like running the
request immediately, DMA map it or providing a thread to process the queue in)
even though a lot of that code really shouldn't vary that much from device to
device.
Thus this patch provides a mechanism for pushing requests to the hardware
as it becomes free that drivers could use. And this framework is patterned
on the SPI code and has worked out well there.
(https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/
drivers/spi/spi.c?id=ffbbdd21329f3e15eeca6df2d4bc11c04d9d91c0)
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The generic crc32 implementation is currently called crc32. This
is a problem because it clashes with the lib implementation of crc32.
This patch renames the crypto crc32 to crc32_generic so that it is
consistent with crc32c. An alias for the driver is also added.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds PKCS#1 v1.5 standard RSA padding as a separate template.
This way an RSA cipher with padding can be obtained by instantiating
"pkcs1pad(rsa)". The reason for adding this is that RSA is almost
never used without this padding (or OAEP) so it will be needed for
either certificate work in the kernel or the userspace, and I also hear
that it is likely implemented by hardware RSA in which case hardware
implementations of the whole of pkcs1pad(rsa) can be provided.
Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Setkey function has been split into set_priv_key and set_pub_key.
Akcipher requests takes sgl for src and dst instead of void *.
Users of the API i.e. two existing RSA implementation and
test mgr code have been updated accordingly.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch introduces the crypto skcipher interface which aims
to replace both blkcipher and ablkcipher.
It's very similar to the existing ablkcipher interface. The
main difference is the removal of the givcrypt interface. In
order to make the transition easier for blkcipher users, there
is a helper SKCIPHER_REQUEST_ON_STACK which can be used to place
a request on the stack for synchronous transforms.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Kconfig option NULL2 has been added as CRYPTO_MANAGER now
depends indirectly on NULL2. However, the Makefile was not updated
to use the new option, resulting in potential build failures when
only NULL2 is enabled.
Fixes: 149a39717d ("crypto: aead - Add type-safe geniv init/exit helpers")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The core of the Jitter RNG is intended to be compiled with -O0. To
ensure that the Jitter RNG can be compiled on all architectures,
separate out the RNG core into a stand-alone C file that can be compiled
with -O0 which does not depend on any kernel include file.
As no kernel includes can be used in the C file implementing the core
RNG, any dependencies on kernel code must be extracted.
A second file provides the link to the kernel and the kernel crypto API
that can be compiled with the regular compile options of the kernel.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a new rsa generic SW implementation.
This implements only cryptographic primitives.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Added select on ASN1.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add Public Key Encryption API.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Made CRYPTO_AKCIPHER invisible like other type config options.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the global -O0 compiler flag from the Makefile with GCC
pragmas to mark only the functions required to be compiled without
optimizations.
This patch also adds a comment describing the rationale for the
functions chosen to be compiled without optimizations.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This AEAD uses a chacha20 ablkcipher and a poly1305 ahash to construct the
ChaCha20-Poly1305 AEAD as defined in RFC7539. It supports both synchronous and
asynchronous operations, even if we currently have no async chacha20 or poly1305
drivers.
Signed-off-by: Martin Willi <martin@strongswan.org>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Poly1305 is a fast message authenticator designed by Daniel J. Bernstein.
It is further defined in RFC7539 as a building block for the ChaCha20-Poly1305
AEAD for use in IETF protocols.
This is a portable C implementation of the algorithm without architecture
specific optimizations, based on public domain code by Daniel J. Bernstein and
Andrew Moon.
Signed-off-by: Martin Willi <martin@strongswan.org>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ChaCha20 is a high speed 256-bit key size stream cipher algorithm designed by
Daniel J. Bernstein. It is further specified in RFC7539 for use in IETF
protocols as a building block for the ChaCha20-Poly1305 AEAD.
This is a portable C implementation without any architecture specific
optimizations. It uses a 16-byte IV, which includes the 12-byte ChaCha20 nonce
prepended by the initial block counter. Some algorithms require an explicit
counter value, for example the mentioned AEAD construction.
Signed-off-by: Martin Willi <martin@strongswan.org>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CPU Jitter RNG provides a source of good entropy by
collecting CPU executing time jitter. The entropy in the CPU
execution time jitter is magnified by the CPU Jitter Random
Number Generator. The CPU Jitter Random Number Generator uses
the CPU execution timing jitter to generate a bit stream
which complies with different statistical measurements that
determine the bit stream is random.
The CPU Jitter Random Number Generator delivers entropy which
follows information theoretical requirements. Based on these
studies and the implementation, the caller can assume that
one bit of data extracted from the CPU Jitter Random Number
Generator holds one bit of entropy.
The CPU Jitter Random Number Generator provides a decentralized
source of entropy, i.e. every caller can operate on a private
state of the entropy pool.
The RNG does not have any dependencies on any other service
in the kernel. The RNG only needs a high-resolution time
stamp.
Further design details, the cryptographic assessment and
large array of test results are documented at
http://www.chronox.de/jent.html.
CC: Andreas Steffen <andreas.steffen@strongswan.org>
CC: Theodore Ts'o <tytso@mit.edu>
CC: Sandy Harris <sandyinchina@gmail.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds a new AEAD IV generator echainiv. It is intended
to replace the existing skcipher IV generator eseqiv.
If the underlying AEAD algorithm is using the old AEAD interface,
then echainiv will simply use its IV generator.
Otherwise, echainiv will encrypt a counter just like eseqiv but
it'll first xor it against a previously stored IV similar to
chainiv.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enable compilation of the AEAD AF_ALG support and provide a Kconfig
option to compile the AEAD AF_ALG support.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enable compilation of the RNG AF_ALG support and provide a Kconfig
option to compile the RNG AF_ALG support.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch introduces the multi-buffer crypto daemon which is responsible
for submitting crypto jobs in a work queue to the responsible multi-buffer
crypto algorithm. The idea of the multi-buffer algorihtm is to put
data streams from multiple jobs in a wide (AVX2) register and then
take advantage of SIMD instructions to do crypto computation on several
buffers simultaneously.
The multi-buffer crypto daemon is also responsbile for flushing the
remaining buffers to complete the computation if no new buffers arrive
for a while.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch removes the build-time test that ensures at least one RNG
is set. Instead we will simply not build drbg if no options are set
through Kconfig.
This also fixes a typo in the name of the Kconfig option CRYTPO_DRBG
(should be CRYPTO_DRBG).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We added the soft module dependency of crc32c module alias
to generic crc32c module so other hardware accelerated crc32c
modules could get loaded and used before the generic version.
We also renamed the crypto/crc32c.c containing the generic
crc32c crypto computation to crypto/crc32c_generic.c according
to convention.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
