filechk_* rules often consist of multiple 'echo' lines. They must be
surrounded with { } or ( ) to work correctly. Otherwise, only the
string from the last 'echo' would be written into the target.
Let's take care of that in the 'filechk' in scripts/Kbuild.include
to clean up filechk_* rules.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, filechk unconditionally opens the first prerequisite and
redirects it as the stdin of a filechk_* rule. Hence, every target
using $(call filechk,...) must list something as the first prerequisite
even if it is unneeded.
'< $<' is actually unneeded in most cases. Each rule can explicitly
adds it if necessary.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When LLVM=1 is used, we can assume that lld are expected to be used.
But sadly, defining default LD on Makefile is not enough, so we have to
force it here too.
Signed-off-by: Nauval Rizky <enuma.alrizky@gmail.com>
Signed-off-by: azrim <mirzaspc@gmail.com>
Not all toolchains have the baremetal elf targets, RedHat/Fedora ones
in particular. So, probe for whether it's available and use the previous
(linux) targets if it isn't.
Reported-by: Laura Abbott <labbott@redhat.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Currently, the existence of $(dir $(make-cache)) is always checked,
and created if it is missing.
We can avoid unnecessary system calls by some tricks.
[1] If KBUILD_SRC is unset, we are building in the source tree.
The output directory checks can be entirely skipped.
[2] If at least one cache data is found, it means the cache file
was included. Obviously its directory exists. Skip "mkdir -p".
[3] If Makefile does not contain any call of __run-and-store, it will
not create a cache file. No need to create its directory.
[4] The "mkdir -p" should be only invoked by the first call of
__run-and-store
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Danny Lin <danny@kdrag0n.dev>
The cache files are only cleaned away by "make clean". If you continue
incremental builds, the cache files will grow up little by little.
It is not a big deal in general use cases because compiler flags do not
change quite often.
However, if you do build-test for various architectures, compilers, and
kernel configurations, you will end up with huge cache files soon.
When the cache file exceeds 1000 lines, shrink it down to 500 by "tail".
The Least Recently Added lines are cut. (not Least Recently Used)
I hope it will work well enough.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Danny Lin <danny@kdrag0n.dev>
While timing a "no-op" build of the kernel (incrementally building the
kernel even though nothing changed) in the Chrome OS build system I
found that it was much slower than I expected.
Digging into things a bit, I found that quite a bit of the time was
spent invoking the C compiler even though we weren't actually building
anything. Currently in the Chrome OS build system the C compiler is
called through a number of wrappers (one of which is written in
python!) and can take upwards of 100 ms to invoke even if we're not
doing anything difficult, so these invocations of the compiler were
taking a lot of time. Worse the invocations couldn't seem to take
advantage of the multiple cores on my system.
Certainly it seems like we could make the compiler invocations in the
Chrome OS build system faster, but only to a point. Inherently
invoking a program as big as a C compiler is a fairly heavy
operation. Thus even if we can speed the compiler calls it made sense
to track down what was happening.
It turned out that all the compiler invocations were coming from
usages like this in the kernel's Makefile:
KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks,)
Due to the way cc-option and similar statements work the above
contains an implicit call to the C compiler. ...and due to the fact
that we're storing the result in KBUILD_CFLAGS, a simply expanded
variable, the call will happen every time the Makefile is parsed, even
if there are no users of KBUILD_CFLAGS.
Rather than redoing this computation every time, it makes a lot of
sense to cache the result of all of the Makefile's compiler calls just
like we do when we compile a ".c" file to a ".o" file. Conceptually
this is quite a simple idea. ...and since the calls to invoke the
compiler and similar tools are centrally located in the Kbuild.include
file this doesn't even need to be super invasive.
Implementing the cache in a simple-to-use and efficient way is not
quite as simple as it first sounds, though. To get maximum speed we
really want the cache in a format that make can natively understand
and make doesn't really have an ability to load/parse files. ...but
make _can_ import other Makefiles, so the solution is to store the
cache in Makefile format. This requires coming up with a valid/unique
Makefile variable name for each value to be cached, but that's
solvable with some cleverness.
After this change, we'll automatically create a ".cache.mk" file that
will contain our cached variables. We'll load this on each invocation
of make and will avoid recomputing anything that's already in our
cache. The cache is stored in a format that it shouldn't need any
invalidation since anything that might change should affect the "key"
and any old cached value won't be used.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Danny Lin <danny@kdrag0n.dev>
LLD is a relatively new linker from the LLVM Project that aims to be a
faster and more modern alternative to the GNU gold and bfd linkers from
binutils: https://lld.llvm.org/
I've also found that it offers more insightful diagnostics when
something goes wrong, e.g. when there are undefined references. It does
also appear to speed up the overall build time by 4-10s as compared to
ld.bfd.
These new config options will only allow fully-working configurations:
- gold/lld when Clang LTO is enabled
- bfd/lld otherwise
Signed-off-by: Danny Lin <danny@kdrag0n.dev>
UtsavBalar1231: adapt for aosp-new changes
Signed-off-by: UtsavBalar1231 <utsavbalar1231@gmail.com>
Changes in 4.14.187
scsi: scsi_devinfo: handle non-terminated strings
net: be more gentle about silly gso requests coming from user
block/bio-integrity: don't free 'buf' if bio_integrity_add_page() failed
net: sched: export __netdev_watchdog_up()
fix a braino in "sparc32: fix register window handling in genregs32_[gs]et()"
apparmor: don't try to replace stale label in ptraceme check
ibmveth: Fix max MTU limit
mld: fix memory leak in ipv6_mc_destroy_dev()
net: bridge: enfore alignment for ethernet address
net: fix memleak in register_netdevice()
net: usb: ax88179_178a: fix packet alignment padding
rocker: fix incorrect error handling in dma_rings_init
rxrpc: Fix notification call on completion of discarded calls
sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket
tcp: grow window for OOO packets only for SACK flows
tg3: driver sleeps indefinitely when EEH errors exceed eeh_max_freezes
ip_tunnel: fix use-after-free in ip_tunnel_lookup()
tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
ip6_gre: fix use-after-free in ip6gre_tunnel_lookup()
net: Fix the arp error in some cases
net: Do not clear the sock TX queue in sk_set_socket()
net: core: reduce recursion limit value
USB: ohci-sm501: Add missed iounmap() in remove
usb: dwc2: Postponed gadget registration to the udc class driver
usb: add USB_QUIRK_DELAY_INIT for Logitech C922
USB: ehci: reopen solution for Synopsys HC bug
usb: host: xhci-mtk: avoid runtime suspend when removing hcd
usb: host: ehci-exynos: Fix error check in exynos_ehci_probe()
ALSA: usb-audio: add quirk for Denon DCD-1500RE
xhci: Fix incorrect EP_STATE_MASK
xhci: Fix enumeration issue when setting max packet size for FS devices.
cdc-acm: Add DISABLE_ECHO quirk for Microchip/SMSC chip
loop: replace kill_bdev with invalidate_bdev
ALSA: usb-audio: uac1: Invalidate ctl on interrupt
ALSA: usb-audio: Clean up mixer element list traverse
ALSA: usb-audio: Fix OOB access of mixer element list
xhci: Poll for U0 after disabling USB2 LPM
cifs/smb3: Fix data inconsistent when punch hole
cifs/smb3: Fix data inconsistent when zero file range
efi/esrt: Fix reference count leak in esre_create_sysfs_entry.
ARM: dts: NSP: Correct FA2 mailbox node
rxrpc: Fix handling of rwind from an ACK packet
RDMA/cma: Protect bind_list and listen_list while finding matching cm id
ASoC: rockchip: Fix a reference count leak.
RDMA/mad: Fix possible memory leak in ib_mad_post_receive_mads()
net: qed: fix left elements count calculation
net: qed: fix NVMe login fails over VFs
net: qed: fix excessive QM ILT lines consumption
ARM: imx5: add missing put_device() call in imx_suspend_alloc_ocram()
usb: gadget: udc: Potential Oops in error handling code
netfilter: ipset: fix unaligned atomic access
net: bcmgenet: use hardware padding of runt frames
sched/core: Fix PI boosting between RT and DEADLINE tasks
ata/libata: Fix usage of page address by page_address in ata_scsi_mode_select_xlat function
net: alx: fix race condition in alx_remove
s390/ptrace: fix setting syscall number
kbuild: improve cc-option to clean up all temporary files
blktrace: break out of blktrace setup on concurrent calls
ALSA: hda: Add NVIDIA codec IDs 9a & 9d through a0 to patch table
ACPI: sysfs: Fix pm_profile_attr type
KVM: X86: Fix MSR range of APIC registers in X2APIC mode
KVM: nVMX: Plumb L2 GPA through to PML emulation
btrfs: fix failure of RWF_NOWAIT write into prealloc extent beyond eof
mm/slab: use memzero_explicit() in kzfree()
ocfs2: load global_inode_alloc
ocfs2: fix value of OCFS2_INVALID_SLOT
ocfs2: fix panic on nfs server over ocfs2
arm64: perf: Report the PC value in REGS_ABI_32 mode
tracing: Fix event trigger to accept redundant spaces
drm/radeon: fix fb_div check in ni_init_smc_spll_table()
Staging: rtl8723bs: prevent buffer overflow in update_sta_support_rate()
sunrpc: fixed rollback in rpc_gssd_dummy_populate()
SUNRPC: Properly set the @subbuf parameter of xdr_buf_subsegment()
pNFS/flexfiles: Fix list corruption if the mirror count changes
NFSv4 fix CLOSE not waiting for direct IO compeletion
xfs: add agf freeblocks verify in xfs_agf_verify
Revert "tty: hvc: Fix data abort due to race in hvc_open"
Linux 4.14.187
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I5f3301cdfbf593334e7b3d83f6c83f56a6476a33
[ Upstream commit f2f02ebd8f3833626642688b2d2c6a7b3c141fa9 ]
When cc-option and friends evaluate compiler flags, the temporary file
$$TMP is created as an output object, and automatically cleaned up.
The actual file path of $$TMP is .<pid>.tmp, here <pid> is the process
ID of $(shell ...) invoked from cc-option. (Please note $$$$ is the
escape sequence of $$).
Such garbage files are cleaned up in most cases, but some compiler flags
create additional output files.
For example, -gsplit-dwarf creates a .dwo file.
When CONFIG_DEBUG_INFO_SPLIT=y, you will see a bunch of .<pid>.dwo files
left in the top of build directories. You may not notice them unless you
do 'ls -a', but the garbage files will increase every time you run 'make'.
This commit changes the temporary object path to .tmp_<pid>/tmp, and
removes .tmp_<pid> directory when exiting. Separate build artifacts such
as *.dwo will be cleaned up all together because their file paths are
usually determined based on the base name of the object.
Another example is -ftest-coverage, which outputs the coverage data into
<base-name-of-object>.gcno
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Changes in 4.14.115
kbuild: simplify ld-option implementation
cifs: do not attempt cifs operation on smb2+ rename error
tracing: Fix a memory leak by early error exit in trace_pid_write()
tracing: Fix buffer_ref pipe ops
zram: pass down the bvec we need to read into in the work struct
lib/Kconfig.debug: fix build error without CONFIG_BLOCK
MIPS: scall64-o32: Fix indirect syscall number load
trace: Fix preempt_enable_no_resched() abuse
IB/rdmavt: Fix frwr memory registration
sched/numa: Fix a possible divide-by-zero
ceph: only use d_name directly when parent is locked
ceph: ensure d_name stability in ceph_dentry_hash()
ceph: fix ci->i_head_snapc leak
nfsd: Don't release the callback slot unless it was actually held
sunrpc: don't mark uninitialised items as VALID.
Input: synaptics-rmi4 - write config register values to the right offset
vfio/type1: Limit DMA mappings per container
dmaengine: sh: rcar-dmac: With cyclic DMA residue 0 is valid
ARM: 8857/1: efi: enable CP15 DMB instructions before cleaning the cache
drm/vc4: Fix memory leak during gpu reset.
Revert "drm/i915/fbdev: Actually configure untiled displays"
drm/vc4: Fix compilation error reported by kbuild test bot
USB: Add new USB LPM helpers
USB: Consolidate LPM checks to avoid enabling LPM twice
ext4: fix some error pointer dereferences
vsock/virtio: fix kernel panic from virtio_transport_reset_no_sock
tipc: handle the err returned from cmd header function
slip: make slhc_free() silently accept an error pointer
intel_th: gth: Fix an off-by-one in output unassigning
fs/proc/proc_sysctl.c: Fix a NULL pointer dereference
ipvs: fix warning on unused variable
binder: fix handling of misaligned binder object
sched/deadline: Correctly handle active 0-lag timers
NFS: Forbid setting AF_INET6 to "struct sockaddr_in"->sin_family.
netfilter: ebtables: CONFIG_COMPAT: drop a bogus WARN_ON
fm10k: Fix a potential NULL pointer dereference
tipc: check bearer name with right length in tipc_nl_compat_bearer_enable
tipc: check link name with right length in tipc_nl_compat_link_set
dm integrity: change memcmp to strncmp in dm_integrity_ctr
x86, retpolines: Raise limit for generating indirect calls from switch-case
x86/retpolines: Disable switch jump tables when retpolines are enabled
mm: Fix warning in insert_pfn()
Revert "block/loop: Use global lock for ioctl() operation."
ipv4: add sanity checks in ipv4_link_failure()
mlxsw: spectrum: Fix autoneg status in ethtool
net/mlx5e: ethtool, Remove unsupported SFP EEPROM high pages query
net: rds: exchange of 8K and 1M pool
net: stmmac: move stmmac_check_ether_addr() to driver probe
stmmac: pci: Adjust IOT2000 matching
team: fix possible recursive locking when add slaves
net/rose: Convert timers to use timer_setup()
net/rose: fix unbound loop in rose_loopback_timer()
ipv4: set the tcp_min_rtt_wlen range from 0 to one day
powerpc/fsl: Add FSL_PPC_BOOK3E as supported arch for nospectre_v2 boot arg
Documentation: Add nospectre_v1 parameter
Linux 4.14.115
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 0294e6f4a0006856e1f36b8cd8fa088d9e499e98 upstream.
Currently, linker options are tested by the coordination of $(CC) and
$(LD) because $(LD) needs some object to link.
As commit 86a9df597cdd ("kbuild: fix linker feature test macros when
cross compiling with Clang") addressed, we need to make sure $(CC)
and $(LD) agree the underlying architecture of the passed object.
This could be a bit complex when we combine tools from different groups.
For example, we can use clang for $(CC), but we still need to rely on
GCC toolchain for $(LD).
So, I was searching for a way of standalone testing of linker options.
A trick I found is to use '-v'; this not only prints the version string,
but also tests if the given option is recognized.
If a given option is supported,
$ aarch64-linux-gnu-ld -v --fix-cortex-a53-843419
GNU ld (Linaro_Binutils-2017.11) 2.28.2.20170706
$ echo $?
0
If unsupported,
$ aarch64-linux-gnu-ld -v --fix-cortex-a53-843419
GNU ld (crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) 2.23.1
aarch64-linux-gnu-ld: unrecognized option '--fix-cortex-a53-843419'
aarch64-linux-gnu-ld: use the --help option for usage information
$ echo $?
1
Gold works likewise.
$ aarch64-linux-gnu-ld.gold -v --fix-cortex-a53-843419
GNU gold (Linaro_Binutils-2017.11 2.28.2.20170706) 1.14
masahiro@pug:~/ref/linux$ echo $?
0
$ aarch64-linux-gnu-ld.gold -v --fix-cortex-a53-999999
GNU gold (Linaro_Binutils-2017.11 2.28.2.20170706) 1.14
aarch64-linux-gnu-ld.gold: --fix-cortex-a53-999999: unknown option
aarch64-linux-gnu-ld.gold: use the --help option for usage information
$ echo $?
1
LLD too.
$ ld.lld -v --gc-sections
LLD 7.0.0 (http://llvm.org/git/lld.git 4a0e4190e74cea19f8a8dc625ccaebdf8b5d1585) (compatible with GNU linkers)
$ echo $?
0
$ ld.lld -v --fix-cortex-a53-843419
LLD 7.0.0 (http://llvm.org/git/lld.git 4a0e4190e74cea19f8a8dc625ccaebdf8b5d1585) (compatible with GNU linkers)
$ echo $?
0
$ ld.lld -v --fix-cortex-a53-999999
ld.lld: error: unknown argument: --fix-cortex-a53-999999
LLD 7.0.0 (http://llvm.org/git/lld.git 4a0e4190e74cea19f8a8dc625ccaebdf8b5d1585) (compatible with GNU linkers)
$ echo $?
1
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
[nc: try-run-cached was added later, just use try-run, which is the
current mainline state]
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes in 4.14.72
be2net: Fix memory leak in be_cmd_get_profile_config()
net/mlx5: Fix use-after-free in self-healing flow
net: qca_spi: Fix race condition in spi transfers
rds: fix two RCU related problems
net/mlx5: Check for error in mlx5_attach_interface
net/mlx5: Fix debugfs cleanup in the device init/remove flow
net/mlx5: E-Switch, Fix memory leak when creating switchdev mode FDB tables
net/tls: Set count of SG entries if sk_alloc_sg returns -ENOSPC
erspan: fix error handling for erspan tunnel
erspan: return PACKET_REJECT when the appropriate tunnel is not found
tcp: really ignore MSG_ZEROCOPY if no SO_ZEROCOPY
hv/netvsc: Fix NULL dereference at single queue mode fallback
usb: dwc3: change stream event enable bit back to 13
iommu/arm-smmu-v3: sync the OVACKFLG to PRIQ consumer register
iommu/io-pgtable-arm-v7s: Abort allocation when table address overflows the PTE
ALSA: msnd: Fix the default sample sizes
ALSA: usb-audio: Fix multiple definitions in AU0828_DEVICE() macro
xfrm: fix 'passing zero to ERR_PTR()' warning
amd-xgbe: use dma_mapping_error to check map errors
gfs2: Special-case rindex for gfs2_grow
clk: imx6ul: fix missing of_node_put()
clk: core: Potentially free connection id
clk: clk-fixed-factor: Clear OF_POPULATED flag in case of failure
kbuild: add .DELETE_ON_ERROR special target
media: tw686x: Fix oops on buffer alloc failure
dmaengine: pl330: fix irq race with terminate_all
MIPS: ath79: fix system restart
media: videobuf2-core: check for q->error in vb2_core_qbuf()
IB/rxe: Drop QP0 silently
block: allow max_discard_segments to be stacked
IB/ipoib: Fix error return code in ipoib_dev_init()
mtd/maps: fix solutionengine.c printk format warnings
media: ov5645: Supported external clock is 24MHz
perf test: Fix subtest number when showing results
gfs2: Don't reject a supposedly full bitmap if we have blocks reserved
perf tools: Synthesize GROUP_DESC feature in pipe mode
fbdev: omapfb: off by one in omapfb_register_client()
perf tools: Fix struct comm_str removal crash
video: goldfishfb: fix memory leak on driver remove
fbdev/via: fix defined but not used warning
perf powerpc: Fix callchain ip filtering when return address is in a register
video: fbdev: pxafb: clear allocated memory for video modes
fbdev: Distinguish between interlaced and progressive modes
ARM: exynos: Clear global variable on init error path
perf powerpc: Fix callchain ip filtering
nvme-rdma: unquiesce queues when deleting the controller
KVM: arm/arm64: vgic: Fix possible spectre-v1 write in vgic_mmio_write_apr()
powerpc/powernv: opal_put_chars partial write fix
staging: bcm2835-camera: fix timeout handling in wait_for_completion_timeout
staging: bcm2835-camera: handle wait_for_completion_timeout return properly
ASoC: rt5514: Fix the issue of the delay volume applied
MIPS: jz4740: Bump zload address
mac80211: restrict delayed tailroom needed decrement
Smack: Fix handling of IPv4 traffic received by PF_INET6 sockets
wan/fsl_ucc_hdlc: use IS_ERR_VALUE() to check return value of qe_muram_alloc
arm64: fix possible spectre-v1 write in ptrace_hbp_set_event()
reset: imx7: Fix always writing bits as 0
efi/arm: preserve early mapping of UEFI memory map longer for BGRT
nfp: avoid buffer leak when FW communication fails
xen-netfront: fix queue name setting
arm64: dts: qcom: db410c: Fix Bluetooth LED trigger
ARM: dts: qcom: msm8974-hammerhead: increase load on l20 for sdhci
s390/qeth: fix race in used-buffer accounting
s390/qeth: reset layer2 attribute on layer switch
platform/x86: toshiba_acpi: Fix defined but not used build warnings
KVM: arm/arm64: Fix vgic init race
drivers/base: stop new probing during shutdown
i2c: aspeed: Fix initial values of master and slave state
dmaengine: mv_xor_v2: kill the tasklets upon exit
crypto: sharah - Unregister correct algorithms for SAHARA 3
x86/pti: Check the return value of pti_user_pagetable_walk_p4d()
x86/pti: Check the return value of pti_user_pagetable_walk_pmd()
x86/mm/pti: Add an overflow check to pti_clone_pmds()
xen-netfront: fix warn message as irq device name has '/'
RDMA/cma: Protect cma dev list with lock
pstore: Fix incorrect persistent ram buffer mapping
xen/netfront: fix waiting for xenbus state change
IB/ipoib: Avoid a race condition between start_xmit and cm_rep_handler
s390/crypto: Fix return code checking in cbc_paes_crypt()
mmc: omap_hsmmc: fix wakeirq handling on removal
ipmi: Fix I2C client removal in the SSIF driver
Tools: hv: Fix a bug in the key delete code
misc: hmc6352: fix potential Spectre v1
xhci: Fix use after free for URB cancellation on a reallocated endpoint
usb: Don't die twice if PCI xhci host is not responding in resume
mei: ignore not found client in the enumeration
mei: bus: need to unlink client before freeing
USB: Add quirk to support DJI CineSSD
usb: uas: add support for more quirk flags
usb: Avoid use-after-free by flushing endpoints early in usb_set_interface()
usb: host: u132-hcd: Fix a sleep-in-atomic-context bug in u132_get_frame()
USB: add quirk for WORLDE Controller KS49 or Prodipe MIDI 49C USB controller
usb: gadget: udc: renesas_usb3: fix maxpacket size of ep0
USB: net2280: Fix erroneous synchronization change
USB: serial: io_ti: fix array underflow in completion handler
usb: misc: uss720: Fix two sleep-in-atomic-context bugs
USB: serial: ti_usb_3410_5052: fix array underflow in completion handler
USB: yurex: Fix buffer over-read in yurex_write()
usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()
Revert "cdc-acm: implement put_char() and flush_chars()"
cifs: prevent integer overflow in nxt_dir_entry()
CIFS: fix wrapping bugs in num_entries()
xtensa: ISS: don't allocate memory in platform_setup
perf/core: Force USER_DS when recording user stack data
x86/EISA: Don't probe EISA bus for Xen PV guests
NFSv4.1 fix infinite loop on I/O.
binfmt_elf: Respect error return from `regset->active'
net/mlx5: Add missing SET_DRIVER_VERSION command translation
arm64: dts: uniphier: Add missing cooling device properties for CPUs
audit: fix use-after-free in audit_add_watch
mtdchar: fix overflows in adjustment of `count`
vfs: fix freeze protection in mnt_want_write_file() for overlayfs
Bluetooth: Use lock_sock_nested in bt_accept_enqueue
evm: Don't deadlock if a crypto algorithm is unavailable
KVM: PPC: Book3S HV: Add of_node_put() in success path
security: check for kstrdup() failure in lsm_append()
MIPS: loongson64: cs5536: Fix PCI_OHCI_INT_REG reads
configfs: fix registered group removal
pinctrl: rza1: Fix selector use for groups and functions
sched/core: Use smp_mb() in wake_woken_function()
efi/esrt: Only call efi_mem_reserve() for boot services memory
ARM: hisi: handle of_iomap and fix missing of_node_put
ARM: hisi: fix error handling and missing of_node_put
ARM: hisi: check of_iomap and fix missing of_node_put
liquidio: fix hang when re-binding VF host drv after running DPDK VF driver
gpu: ipu-v3: csi: pass back mbus_code_to_bus_cfg error codes
tty: fix termios input-speed encoding when using BOTHER
tty: fix termios input-speed encoding
mmc: sdhci-of-esdhc: set proper dma mask for ls104x chips
mmc: tegra: prevent HS200 on Tegra 3
mmc: sdhci: do not try to use 3.3V signaling if not supported
drm/nouveau: Fix runtime PM leak in drm_open()
drm/nouveau/debugfs: Wake up GPU before doing any reclocking
drm/nouveau: tegra: Detach from ARM DMA/IOMMU mapping
parport: sunbpp: fix error return code
sched/fair: Fix util_avg of new tasks for asymmetric systems
coresight: Handle errors in finding input/output ports
coresight: tpiu: Fix disabling timeouts
coresight: ETM: Add support for Arm Cortex-A73 and Cortex-A35
staging: bcm2835-audio: Don't leak workqueue if open fails
gpio: pxa: Fix potential NULL dereference
gpiolib: Mark gpio_suffixes array with __maybe_unused
mfd: 88pm860x-i2c: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT)
input: rohm_bu21023: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT)
drm/amdkfd: Fix error codes in kfd_get_process
rtc: bq4802: add error handling for devm_ioremap
ALSA: pcm: Fix snd_interval_refine first/last with open min/max
scsi: libfc: fixup 'sleeping function called from invalid context'
selftest: timers: Tweak raw_skew to SKIP when ADJ_OFFSET/other clock adjustments are in progress
drm/panel: type promotion bug in s6e8aa0_read_mtp_id()
blk-mq: only attempt to merge bio if there is rq in sw queue
blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()
pinctrl: msm: Fix msm_config_group_get() to be compliant
pinctrl: qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant
clk: tegra: bpmp: Don't crash when a clock fails to register
mei: bus: type promotion bug in mei_nfc_if_version()
earlycon: Initialize port->uartclk based on clock-frequency property
earlycon: Remove hardcoded port->uartclk initialization in of_setup_earlycon
ASoC: samsung: i2s: Fix error handling path in i2s_set_sysclk()
ASoC: samsung: Fix invalid argument when devm_gpiod_get is called
drm/i915: Apply the GTT write flush for all !llc machines
net/ipv6: prevent use after free in ip6_route_mpath_notify
e1000e: Remove Other from EIAC
Partial revert "e1000e: Avoid receiver overrun interrupt bursts"
e1000e: Fix queue interrupt re-raising in Other interrupt
e1000e: Avoid missed interrupts following ICR read
Revert "e1000e: Separate signaling for link check/link up"
e1000e: Fix link check race condition
e1000e: Fix check_for_link return value with autoneg off
Linux 4.14.72
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit 9c2af1c7377a8a6ef86e5cabf80978f3dbbb25c0 ]
If Make gets a fatal signal while a shell is executing, it may delete
the target file that the recipe was supposed to update. This is needed
to make sure that it is remade from scratch when Make is next run; if
Make is interrupted after the recipe has begun to write the target file,
it results in an incomplete file whose time stamp is newer than that
of the prerequisites files. Make automatically deletes the incomplete
file on interrupt unless the target is marked .PRECIOUS.
The situation is just the same as when the shell fails for some reasons.
Usually when a recipe line fails, if it has changed the target file at
all, the file is corrupted, or at least it is not completely updated.
Yet the file’s time stamp says that it is now up to date, so the next
time Make runs, it will not try to update that file.
However, Make does not cater to delete the incomplete target file in
this case. We need to add .DELETE_ON_ERROR somewhere in the Makefile
to request it.
scripts/Kbuild.include seems a suitable place to add it because it is
included from almost all sub-makes.
Please note .DELETE_ON_ERROR is not effective for phony targets.
The external module building should never ever touch the kernel tree.
The following recipe fails if include/generated/autoconf.h is missing.
However, include/config/auto.conf is not deleted since it is a phony
target.
PHONY += include/config/auto.conf
include/config/auto.conf:
$(Q)test -e include/generated/autoconf.h -a -e $@ || ( \
echo >&2; \
echo >&2 " ERROR: Kernel configuration is invalid."; \
echo >&2 " include/generated/autoconf.h or $@ are missing.";\
echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \
echo >&2 ; \
/bin/false)
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes in 4.14.55
userfaultfd: hugetlbfs: fix userfaultfd_huge_must_wait() pte access
mm: hugetlb: yield when prepping struct pages
tracing: Fix missing return symbol in function_graph output
scsi: sg: mitigate read/write abuse
scsi: target: Fix truncated PR-in ReadKeys response
s390: Correct register corruption in critical section cleanup
drbd: fix access after free
vfio: Use get_user_pages_longterm correctly
cifs: Fix use after free of a mid_q_entry
cifs: Fix memory leak in smb2_set_ea()
cifs: Fix infinite loop when using hard mount option
cifs: Fix slab-out-of-bounds in send_set_info() on SMB2 ACE setting
drm: Use kvzalloc for allocating blob property memory
drm/udl: fix display corruption of the last line
jbd2: don't mark block as modified if the handle is out of credits
ext4: add corruption check in ext4_xattr_set_entry()
ext4: always verify the magic number in xattr blocks
ext4: make sure bitmaps and the inode table don't overlap with bg descriptors
ext4: always check block group bounds in ext4_init_block_bitmap()
ext4: only look at the bg_flags field if it is valid
ext4: verify the depth of extent tree in ext4_find_extent()
ext4: include the illegal physical block in the bad map ext4_error msg
ext4: clear i_data in ext4_inode_info when removing inline data
ext4: never move the system.data xattr out of the inode body
ext4: avoid running out of journal credits when appending to an inline file
ext4: add more inode number paranoia checks
ext4: add more mount time checks of the superblock
ext4: check superblock mapped prior to committing
block: factor out __blkdev_issue_zero_pages()
block: cope with WRITE ZEROES failing in blkdev_issue_zeroout()
HID: i2c-hid: Fix "incomplete report" noise
HID: hiddev: fix potential Spectre v1
HID: debug: check length before copy_to_user()
irq/core: Fix boot crash when the irqaffinity= boot parameter is passed on CPUMASK_OFFSTACK=y kernels(v1)
mm: hwpoison: disable memory error handling on 1GB hugepage
media: vb2: core: Finish buffers at the end of the stream
f2fs: truncate preallocated blocks in error case
Revert "dpaa_eth: fix error in dpaa_remove()"
Kbuild: fix # escaping in .cmd files for future Make
media: cx25840: Use subdev host data for PLL override
mtd: rawnand: mxc: set spare area size register explicitly
fs: allow per-device dax status checking for filesystems
dax: change bdev_dax_supported() to support boolean returns
dax: check for QUEUE_FLAG_DAX in bdev_dax_supported()
dm: set QUEUE_FLAG_DAX accordingly in dm_table_set_restrictions()
dm: prevent DAX mounts if not supported
mtd: cfi_cmdset_0002: Change definition naming to retry write operation
mtd: cfi_cmdset_0002: Change erase functions to retry for error
mtd: cfi_cmdset_0002: Change erase functions to check chip good only
netfilter: nf_log: don't hold nf_log_mutex during user access
staging: comedi: quatech_daqp_cs: fix no-op loop daqp_ao_insn_write()
sched, tracing: Fix trace_sched_pi_setprio() for deboosting
Revert mm/vmstat.c: fix vmstat_update() preemption BUG
Linux 4.14.55
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 9564a8cf422d7b58f6e857e3546d346fa970191e upstream.
I tried building using a freshly built Make (4.2.1-69-g8a731d1), but
already the objtool build broke with
orc_dump.c: In function ‘orc_dump’:
orc_dump.c:106:2: error: ‘elf_getshnum’ is deprecated [-Werror=deprecated-declarations]
if (elf_getshdrnum(elf, &nr_sections)) {
Turns out that with that new Make, the backslash was not removed, so cpp
didn't see a #include directive, grep found nothing, and
-DLIBELF_USE_DEPRECATED was wrongly put in CFLAGS.
Now, that new Make behaviour is documented in their NEWS file:
* WARNING: Backward-incompatibility!
Number signs (#) appearing inside a macro reference or function invocation
no longer introduce comments and should not be escaped with backslashes:
thus a call such as:
foo := $(shell echo '#')
is legal. Previously the number sign needed to be escaped, for example:
foo := $(shell echo '\#')
Now this latter will resolve to "\#". If you want to write makefiles
portable to both versions, assign the number sign to a variable:
C := \#
foo := $(shell echo '$C')
This was claimed to be fixed in 3.81, but wasn't, for some reason.
To detect this change search for 'nocomment' in the .FEATURES variable.
This also fixes up the two make-cmd instances to replace # with $(pound)
rather than with \#. There might very well be other places that need
similar fixup in preparation for whatever future Make release contains
the above change, but at least this builds an x86_64 defconfig with the
new make.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197847
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This change adds macros for testing both compiler name and
version. Current cc-version, cc-ifversion etc. macros that test
gcc version are left unchanged to prevent compatibility issues
with existing tests.
Bug: 62093296
Bug: 67506682
Change-Id: I14965fcc21dae8dfe31881b172214bf6f8a9f440
(am from https://patchwork.kernel.org/patch/10085767/)
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
commit 86a9df597cdd564d2d29c65897bcad42519e3678 upstream.
I was not seeing my linker flags getting added when using ld-option when
cross compiling with Clang. Upon investigation, this seems to be due to
a difference in how GCC vs Clang handle cross compilation.
GCC is configured at build time to support one backend, that is implicit
when compiling. Clang is explicit via the use of `-target <triple>` and
ships with all supported backends by default.
GNU Make feature test macros that compile then link will always fail
when cross compiling with Clang unless Clang's triple is passed along to
the compiler. For example:
$ clang -x c /dev/null -c -o temp.o
$ aarch64-linux-android/bin/ld -E temp.o
aarch64-linux-android/bin/ld:
unknown architecture of input file `temp.o' is incompatible with
aarch64 output
aarch64-linux-android/bin/ld:
warning: cannot find entry symbol _start; defaulting to
0000000000400078
$ echo $?
1
$ clang -target aarch64-linux-android- -x c /dev/null -c -o temp.o
$ aarch64-linux-android/bin/ld -E temp.o
aarch64-linux-android/bin/ld:
warning: cannot find entry symbol _start; defaulting to 00000000004002e4
$ echo $?
0
This causes conditional checks that invoke $(CC) without the target
triple, then $(LD) on the result, to always fail.
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I was not seeing my linker flags getting added when using ld-option when
cross compiling with Clang. Upon investigation, this seems to be due to
a difference in how GCC vs Clang handle cross compilation.
GCC is configured at build time to support one backend, that is implicit
when compiling. Clang is explicit via the use of `-target <triple>` and
ships with all supported backends by default.
GNU Make feature test macros that compile then link will always fail
when cross compiling with Clang unless Clang's triple is passed along to
the compiler. For example:
$ clang -x c /dev/null -c -o temp.o
$ aarch64-linux-android/bin/ld -E temp.o
aarch64-linux-android/bin/ld:
unknown architecture of input file `temp.o' is incompatible with
aarch64 output
aarch64-linux-android/bin/ld:
warning: cannot find entry symbol _start; defaulting to
0000000000400078
$ echo $?
1
$ clang -target aarch64-linux-android- -x c /dev/null -c -o temp.o
$ aarch64-linux-android/bin/ld -E temp.o
aarch64-linux-android/bin/ld:
warning: cannot find entry symbol _start; defaulting to 00000000004002e4
$ echo $?
0
This causes conditional checks that invoke $(CC) without the target
triple, then $(LD) on the result, to always fail.
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
(cherry picked from commit 86a9df597cdd564d2d29c65897bcad42519e3678)
Bug: 74579705
Change-Id: I38916a35a233edfb33f9b6d14d64a8e560815dfe
Signed-off-by: Greg Hackmann <ghackmann@google.com>
cc-option uses KBUILD_CFLAGS and KBUILD_CPPFLAGS when it determines
whether an option is supported or not. This is fine for options used to
build the kernel itself, however some components like the x86 boot code
use a different set of flags.
Add the new macro __cc-option which is a more generic version of
cc-option with additional parameters. One parameter is the compiler
with which the check should be performed, the other the compiler options
to be used instead KBUILD_C*FLAGS.
Refactor cc-option and hostcc-option to use __cc-option and move
hostcc-option to scripts/Kbuild.include.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Documentation/kbuild/makefiles.txt says the change for align options
occurred at GCC 3.0, and Documentation/process/changes.rst says the
minimal supported GCC version is 3.2, so it should be safe to hard-code
-falign* options.
Fix the only user arch/x86/Makefile_32.cpu and remove cc-option-align.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Pull Kbuild updates from Masahiro Yamada:
- improve Clang support
- clean up various Makefiles
- improve build log visibility (objtool, alpha, ia64)
- improve compiler flag evaluation for better build performance
- fix GCC version-dependent warning
- fix genksyms
* tag 'kbuild-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (23 commits)
kbuild: dtbinst: remove unnecessary __dtbs_install_prep target
ia64: beatify build log for gate.so and gate-syms.o
alpha: make short build log available for division routines
alpha: merge build rules of division routines
alpha: add $(src)/ rather than $(obj)/ to make source file path
Makefile: evaluate LDFLAGS_BUILD_ID only once
objtool: make it visible in make V=1 output
kbuild: clang: add -no-integrated-as to KBUILD_[AC]FLAGS
kbuild: Add support to generate LLVM assembly files
kbuild: Add better clang cross build support
kbuild: drop -Wno-unknown-warning-option from clang options
kbuild: fix asm-offset generation to work with clang
kbuild: consolidate redundant sed script ASM offset generation
frv: Use OFFSET macro in DEF_*REG()
kbuild: avoid conflict between -ffunction-sections and -pg on gcc-4.7
kbuild: Consolidate header generation from ASM offset information
kbuild: use -Oz instead of -Os when using clang
kbuild, LLVMLinux: Add -Werror to cc-option to support clang
Kbuild: make designated_init attribute fatal
kbuild: drop unneeded patterns '.*.orig' and '.*.rej' from distclean
...
Clang will warn about unknown warnings but will not return false
unless -Werror is set. GCC will return false if an unknown
warning is passed.
Adding -Werror make both compiler behave the same.
[arnd: it turns out we need the same patch for testing whether -ffunction-sections
works right with gcc. I've build tested extensively with this patch
applied, so let's just merge this one now.]
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
Signed-off-by: Behan Webster <behanw@converseincode.com>
Reviewed-by: Jan-Simon Möller <dl9pf@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The GCC '-maccumulate-outgoing-args' flag is enabled for most configs,
mostly because of issues which are no longer relevant. For most
configs, and with most recent versions of GCC, it's no longer needed.
Clarify which cases need it, and only enable it for those cases. Also
produce a compile-time error for the ftrace graph + mcount + '-Os' case,
which will otherwise cause runtime failures.
The main benefit of '-maccumulate-outgoing-args' is that it prevents an
ugly prologue for functions which have aligned stacks. But removing the
option also has some benefits: more readable argument saves, smaller
text size, and (presumably) slightly improved performance.
Here are the object size savings for 32-bit and 64-bit defconfig
kernels:
text data bss dec hex filename
10006710 3543328 1773568 15323606 e9d1d6 vmlinux.x86-32.before
9706358 3547424 1773568 15027350 e54c96 vmlinux.x86-32.after
text data bss dec hex filename
10652105 4537576 843776 16033457 f4a6b1 vmlinux.x86-64.before
10639629 4537576 843776 16020981 f475f5 vmlinux.x86-64.after
That comes out to a 3% text size improvement on x86-32 and a 0.1% text
size improvement on x86-64.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170316193133.zrj6gug53766m6nn@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When building with separate object directories and driver specific
Makefiles that add additional header include paths, Kbuild adjusts
the gcc flags so that we include both the directory in the source
tree and in the object tree.
However, due to another bug I fixed earlier, this did not actually
include the correct directory in the object tree, so we know that
we only really need the source tree here. Also, including the
object tree sometimes causes warnings about nonexisting directories
when the include path only exists in the source.
This changes the logic to only emit the -I argument for the srctree,
not for objects. We still need both $(srctree)/$(src) and $(obj)
though, so I'm adding them manually.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Marek <mmarek@suse.com>
When we build with O=objdir and objdir is directly below the source tree,
$(srctree) becomes '..'.
When a Makefile adds a CFLAGS option like -Ipath/to/headers and
we are building with a separate object directory, Kbuild tries to
add two -I options, one for the source tree and one for the object
tree. An absolute path is treated as a special case, and don't add
this one twice. This also normally catches -I$(srctree)/$(src)
as $(srctree) usually is an absolute directory like /home/arnd/linux/.
The combination of the two behaviors however results in an invalid
path name to be included: we get both ../$(src) and ../../$(src),
the latter one pointing outside of the source tree, usually to a
nonexisting directory. Building with 'make W=1' makes this obvious:
cc1: error: ../../arch/arm/mach-s3c24xx/include: No such file or directory [-Werror=missing-include-dirs]
This adds another special case, treating path names starting with ../
like those starting with / so we don't try to prefix that with
$(srctree).
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Marek <mmarek@suse.com>
Currently, arg-check is implemented as follows:
arg-check = $(strip $(filter-out $(cmd_$(1)), $(cmd_$@)) \
$(filter-out $(cmd_$@), $(cmd_$(1))) )
This does not care about the order of arguments that appear in
$(cmd_$(1)) and $(cmd_$@). So, if_changed and friends never rebuild
the target if only the argument order is changed. This is a problem
when the link order is changed.
Apparently,
obj-y += foo.o
obj-y += bar.o
and
obj-y += bar.o
obj-y += foo.o
should be distinguished because the link order determines the probe
order of drivers. So, built-in.o should be rebuilt when the order
of objects is changed.
This commit fixes arg-check to compare the old/current commands
including the argument order.
Of course, this change has a side effect; Kbuild will react to the
change of compile option order. For example, "-DFOO -DBAR" and
"-DBAR -DFOO" should give no difference to the build result, but
false positive should be better than false negative.
I am moving space_escape to the top of Kbuild.include just for a
matter of preference. In practical terms, space_escape can be
defined after arg-check because arg-check uses "=" flavor, not ":=".
Having said that, collecting convenient variables in one place makes
sense from the point of readability.
Chaining "%%%SPACE%%%" to "_-_SPACE_-_" is also a matter of taste
at this point. Actually, it can be arbitrary as long as it is an
unlikely used string. The only problem I see in "%%%SPACE%%%" is
that "%" is a special character in "$(patsubst ...)" context. This
commit just uses "$(subst ...)" for arg-check, but I am fixing it now
in case we might want to use it in $(patsubst ...) context in the
future.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
In kernel/cgroup.c there is:
#define SUBSYS(_x) \
DEFINE_STATIC_KEY_TRUE(_x ## _cgrp_subsys_enabled_key); \
DEFINE_STATIC_KEY_TRUE(_x ## _cgrp_subsys_on_dfl_key); \
EXPORT_SYMBOL_GPL(_x ## _cgrp_subsys_enabled_key); \
EXPORT_SYMBOL_GPL(_x ## _cgrp_subsys_on_dfl_key);
The expansion of this macro causes multiple EXPORT_SYMBOL_GPL() instances
to appear on the same preprocessor line output, confusing the sed script
expecting only one of them per line. Unfortunately this can't be fixed
nicely in the sed script as sed's regexp can't do non greedy matching.
Fix this by turning any semicolon into a line break before filtering.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
The following renames occurred recently:
cmd_cc_i_c --> cmd_cpp_i_c
cmd_as_s_S --> cmd_cpp_s_S
The respective cc_*_c and as_*_S patterns no longer match the above
therefore additional patterns are needed.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
Like with kconfig options, we now have the ability to compile in and
out individual EXPORT_SYMBOL() declarations based on the content of
include/generated/autoksyms.h. However we don't want the entire
world to be rebuilt whenever that file is touched.
Let's apply the same build dependency trick used for CONFIG_* symbols
where the time stamp of empty files whose paths matching those symbols
is used to trigger fine grained rebuilds. In our case the key is the
symbol name passed to EXPORT_SYMBOL().
However, unlike config options, we cannot just use fixdep to parse
the source code for EXPORT_SYMBOL(ksym) because several variants exist
and parsing them all in a separate tool, and keeping it in synch, is
not trivially maintainable. Furthermore, there are variants such as
EXPORT_SYMBOL_GPL(pci_user_read_config_##size);
that are instanciated via a macro for which we can't easily determine
the actual exported symbol name(s) short of actually running the
preprocessor on them.
Storing the symbol name string in a special ELF section doesn't work
for targets that output assembly or preprocessed source.
So the best way is really to leverage the preprocessor by having it
output actual symbol names anchored by a special sequence that can be
easily filtered out. Then the list of symbols is simply fed to fixdep
to be merged with the other dependencies.
That implies the preprocessor is executed twice for each source file.
A previous attempt relied on a warning pragma for each EXPORT_SYMBOL()
instance that was filtered apart from stderr by the build system with
a sed script during the actual compilation pass. Unfortunately the
preprocessor/compiler diagnostic output isn't stable between versions
and this solution, although more efficient, was deemed too fragile.
Because of the lowercasing performed by fixdep, there might be name
collisions triggering spurious rebuilds for similar symbols. But this
shouldn't be a big issue in practice. (This is the case for CONFIG_*
symbols and I didn't want to be different here, whatever the original
reason for doing so.)
To avoid needless build overhead, the exported symbol name gathering is
performed only when CONFIG_TRIM_UNUSED_KSYMS is selected.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
The generation and postprocessing of automatic dependency rules is
duplicated in rule_cc_o_c, rule_as_o_S and if_changed_dep. Since
this is not a trivial one-liner action, it is now abstracted under
cmd_and_fixdep to simplify things and make future changes in this area
easier.
In the rule_cc_o_c and rule_as_o_S cases that means the order of some
commands has been altered, namely fixdep and related file manipulations
are executed earlier, but they didn't depend on those commands that now
execute later.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Under certain conditions, Kbuild shows "... is up to date" where
if_changed or friends are used.
For example, the incremental build of ARM64 Linux shows this message
when the kernel image has not been updated.
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-
CHK include/config/kernel.release
CHK include/generated/uapi/linux/version.h
CHK include/generated/utsrelease.h
CHK include/generated/bounds.h
CHK include/generated/timeconst.h
CHK include/generated/asm-offsets.h
CALL scripts/checksyscalls.sh
CHK include/generated/compile.h
CHK kernel/config_data.h
make[1]: `arch/arm64/boot/Image.gz' is up to date.
Building modules, stage 2.
MODPOST 0 modules
The following is the build rule in arch/arm64/boot/Makefile:
$(obj)/Image.gz: $(obj)/Image FORCE
$(call if_changed,gzip)
If the Image.gz is newer than the Image and the command line has not
changed (i.e., $(any-prereq) and $(arg-check) are both empty), the
build rule $(call if_changed,gzip) is evaluated to be empty, then
GNU Make reports the target is up to date. In order to make GNU Make
quiet, we need to give it something to do, for example, "@:". This
should be fixed in the Kbuild core part rather than in each Makefile.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
We cannot detect clang before including the arch Makefile, because that
can set the default cross compiler. We also cannot detect clang after
including the arch Makefile, because powerpc wants to know about clang.
Solve this by using an deferred variable. This costs us a few shell
invocations, but this is only a constant number.
Reported-by: Behan Webster <behanw@converseincode.com>
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
Since commit 1329e8cc69 ("modsign: Extract signing cert from
CONFIG_MODULE_SIG_KEY if needed"), the build system has carefully coped
with the signing key being specified as a relative path in either the
source or or the build trees.
However, the actual signing of modules has not worked if the filename
is relative to the source tree.
Fix that by moving the config_filename helper into scripts/Kbuild.include
so that it can be used from elsewhere, and then using it in the top-level
Makefile to find the signing key file.
Kill the intermediate $(MODPUBKEY) and $(MODSECKEY) variables too, while
we're at it. There's no need for them.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
The macro "try-run" can have an argument for each of true and false
cases. Having an argument for the false case of cc-ifversion (and
ld-ifversion) would be useful too.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The macros cc-version, cc-fullversion and ld-version take no argument.
It is not necessary to add $(call ...) to invoke them.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Helge Deller <deller@gmx.de> [parisc]
Signed-off-by: Michal Marek <mmarek@suse.cz>
The macro "cc-version" takes no argument. Drop $(CC) from the
"cc-ifversion" definition.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
