Changes in 4.14.44
net: Fix a bug in removing queues from XPS map
net/mlx4_core: Fix error handling in mlx4_init_port_info.
net/sched: fix refcnt leak in the error path of tcf_vlan_init()
net: sched: red: avoid hashing NULL child
net/smc: check for missing nlattrs in SMC_PNETID messages
net: test tailroom before appending to linear skb
packet: in packet_snd start writing at link layer allocation
sock_diag: fix use-after-free read in __sk_free
tcp: purge write queue in tcp_connect_init()
vmxnet3: set the DMA mask before the first DMA map operation
vmxnet3: use DMA memory barriers where required
hv_netvsc: Fix the real number of queues of non-vRSS cases
hv_netvsc: Rename ind_table to rx_table
hv_netvsc: Rename tx_send_table to tx_table
hv_netvsc: Add initialization of tx_table in netvsc_device_add()
hv_netvsc: Set tx_table to equal weight after subchannels open
hv_netvsc: netvsc_teardown_gpadl() split
hv_netvsc: preserve hw_features on mtu/channels/ringparam changes
hv_netvsc: empty current transmit aggregation if flow blocked
hv_netvsc: Use the num_online_cpus() for channel limit
hv_netvsc: avoid retry on send during shutdown
hv_netvsc: only wake transmit queue if link is up
hv_netvsc: fix error unwind handling if vmbus_open fails
hv_netvsc: cancel subchannel setup before halting device
hv_netvsc: fix race in napi poll when rescheduling
hv_netvsc: defer queue selection to VF
hv_netvsc: disable NAPI before channel close
hv_netvsc: use RCU to fix concurrent rx and queue changes
hv_netvsc: change GPAD teardown order on older versions
hv_netvsc: common detach logic
hv_netvsc: Use Windows version instead of NVSP version on GPAD teardown
hv_netvsc: Split netvsc_revoke_buf() and netvsc_teardown_gpadl()
hv_netvsc: Ensure correct teardown message sequence order
hv_netvsc: Fix net device attach on older Windows hosts
sparc: vio: use put_device() instead of kfree()
ext2: fix a block leak
s390: add assembler macros for CPU alternatives
s390: move expoline assembler macros to a header
s390/crc32-vx: use expoline for indirect branches
s390/lib: use expoline for indirect branches
s390/ftrace: use expoline for indirect branches
s390/kernel: use expoline for indirect branches
s390: move spectre sysfs attribute code
s390: extend expoline to BC instructions
s390: use expoline thunks in the BPF JIT
scsi: libsas: defer ata device eh commands to libata
scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()
scsi: zfcp: fix infinite iteration on ERP ready list
loop: don't call into filesystem while holding lo_ctl_mutex
loop: fix LOOP_GET_STATUS lock imbalance
cfg80211: limit wiphy names to 128 bytes
hfsplus: stop workqueue when fill_super() failed
x86/kexec: Avoid double free_page() upon do_kexec_load() failure
usb: gadget: f_uac2: fix bFirstInterface in composite gadget
usb: dwc3: Undo PHY init if soft reset fails
usb: dwc3: omap: don't miss events during suspend/resume
usb: gadget: core: Fix use-after-free of usb_request
usb: gadget: fsl_udc_core: fix ep valid checks
usb: dwc2: Fix dwc2_hsotg_core_init_disconnected()
usb: cdc_acm: prevent race at write to acm while system resumes
net: usbnet: fix potential deadlock on 32bit hosts
ARM: dts: imx7d-sdb: Fix regulator-usb-otg2-vbus node name
usb: host: xhci-plat: revert "usb: host: xhci-plat: enable clk in resume timing"
USB: OHCI: Fix NULL dereference in HCDs using HCD_LOCAL_MEM
net/usb/qmi_wwan.c: Add USB id for lt4120 modem
net-usb: add qmi_wwan if on lte modem wistron neweb d18q1
Bluetooth: btusb: Add USB ID 7392:a611 for Edimax EW-7611ULB
ALSA: usb-audio: Add native DSD support for Luxman DA-06
usb: dwc3: Add SoftReset PHY synchonization delay
usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields
usb: dwc3: Makefile: fix link error on randconfig
xhci: zero usb device slot_id member when disabling and freeing a xhci slot
usb: dwc2: Fix interval type issue
usb: dwc2: hcd: Fix host channel halt flow
usb: dwc2: host: Fix transaction errors in host mode
usb: gadget: ffs: Let setup() return USB_GADGET_DELAYED_STATUS
usb: gadget: ffs: Execute copy_to_user() with USER_DS set
usbip: Correct maximum value of CONFIG_USBIP_VHCI_HC_PORTS
usb: gadget: udc: change comparison to bitshift when dealing with a mask
usb: gadget: composite: fix incorrect handling of OS desc requests
media: lgdt3306a: Fix module count mismatch on usb unplug
media: em28xx: USB bulk packet size fix
Bluetooth: btusb: Add device ID for RTL8822BE
xhci: Show what USB release number the xHC supports from protocol capablity
staging: bcm2835-audio: Release resources on module_exit()
staging: lustre: fix bug in osc_enter_cache_try
staging: fsl-dpaa2/eth: Fix incorrect casts
staging: rtl8192u: return -ENOMEM on failed allocation of priv->oldaddr
staging: ks7010: Use constants from ieee80211_eid instead of literal ints.
staging: lustre: lmv: correctly iput lmo_root
crypto: inside-secure - wait for the request to complete if in the backlog
crypto: atmel-aes - fix the keys zeroing on errors
crypto: ccp - don't disable interrupts while setting up debugfs
crypto: inside-secure - do not process request if no command was issued
crypto: inside-secure - fix the cache_len computation
crypto: inside-secure - fix the extra cache computation
crypto: sunxi-ss - Add MODULE_ALIAS to sun4i-ss
crypto: inside-secure - fix the invalidation step during cra_exit
scsi: mpt3sas: fix an out of bound write
scsi: qla2xxx: Fix memory corruption during hba reset test
scsi: ufs: Enable quirk to ignore sending WRITE_SAME command
scsi: bnx2fc: Fix check in SCSI completion handler for timed out request
scsi: sym53c8xx_2: iterator underflow in sym_getsync()
scsi: mptfusion: Add bounds check in mptctl_hp_targetinfo()
scsi: qla2xxx: Avoid triggering undefined behavior in qla2x00_mbx_completion()
scsi: storvsc: Increase cmd_per_lun for higher speed devices
scsi: qedi: Fix truncation of CHAP name and secret
scsi: aacraid: fix shutdown crash when init fails
scsi: qla4xxx: skip error recovery in case of register disconnect.
scsi: qedi: Fix kernel crash during port toggle
scsi: mpt3sas: Do not mark fw_event workqueue as WQ_MEM_RECLAIM
scsi: sd: Keep disk read-only when re-reading partition
scsi: iscsi_tcp: set BDI_CAP_STABLE_WRITES when data digest enabled
scsi: aacraid: Insure command thread is not recursively stopped
scsi: core: Make SCSI Status CONDITION MET equivalent to GOOD
scsi: mvsas: fix wrong endianness of sgpio api
scsi: lpfc: Fix issue_lip if link is disabled
scsi: lpfc: Fix soft lockup in lpfc worker thread during LIP testing
scsi: lpfc: Fix frequency of Release WQE CQEs
ASoC: hdmi-codec: Fix module unloading caused kernel crash
ASoC: rockchip: rk3288-hdmi-analog: Select needed codecs
ASoC: samsung: odroid: Fix 32000 sample rate handling
ASoC: topology: create TLV data for dapm widgets
ASoC: samsung: i2s: Ensure the RCLK rate is properly determined
clk: rockchip: Fix wrong parent for SDMMC phase clock for rk3228
clk: Don't show the incorrect clock phase
clk: hisilicon: mark wdt_mux_p[] as const
clk: tegra: Fix pll_u rate configuration
clk: rockchip: Prevent calculating mmc phase if clock rate is zero
clk: samsung: s3c2410: Fix PLL rates
clk: samsung: exynos7: Fix PLL rates
clk: samsung: exynos5260: Fix PLL rates
clk: samsung: exynos5433: Fix PLL rates
clk: samsung: exynos5250: Fix PLL rates
clk: samsung: exynos3250: Fix PLL rates
media: dmxdev: fix error code for invalid ioctls
media: Don't let tvp5150_get_vbi() go out of vbi_ram_default array
media: ov5645: add missing of_node_put() in error path
media: cx23885: Override 888 ImpactVCBe crystal frequency
media: cx23885: Set subdev host data to clk_freq pointer
media: s3c-camif: fix out-of-bounds array access
media: lgdt3306a: Fix a double kfree on i2c device remove
media: em28xx: Add Hauppauge SoloHD/DualHD bulk models
media: v4l: vsp1: Fix display stalls when requesting too many inputs
media: i2c: adv748x: fix HDMI field heights
media: vb2: Fix videobuf2 to map correct area
media: vivid: fix incorrect capabilities for radio
media: cx25821: prevent out-of-bounds read on array card
serial: xuartps: Fix out-of-bounds access through DT alias
serial: sh-sci: Fix out-of-bounds access through DT alias
serial: samsung: Fix out-of-bounds access through serial port index
serial: mxs-auart: Fix out-of-bounds access through serial port index
serial: imx: Fix out-of-bounds access through serial port index
serial: fsl_lpuart: Fix out-of-bounds access through DT alias
serial: arc_uart: Fix out-of-bounds access through DT alias
serial: 8250: Don't service RX FIFO if interrupts are disabled
serial: altera: ensure port->regshift is honored consistently
rtc: snvs: Fix usage of snvs_rtc_enable
rtc: hctosys: Ensure system time doesn't overflow time_t
rtc: rk808: fix possible race condition
rtc: m41t80: fix race conditions
rtc: tx4939: avoid unintended sign extension on a 24 bit shift
rtc: rp5c01: fix possible race condition
rtc: goldfish: Add missing MODULE_LICENSE
Linux 4.14.44
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit 5d6ae4f0da8a64a185074dabb1b2f8c148efa741 ]
When handling an OS descriptor request, one of the first operations is
to zero out the request buffer using the wLength from the setup packet.
There is no bounds checking, so a wLength > 4096 would clobber memory
adjacent to the request buffer. Fix this by taking the min of wLength
and the request buffer length prior to the memset. While at it, define
the buffer length in a header file so that magic numbers don't appear
throughout the code.
When returning data to the host, the data length should be the min of
the wLength and the valid data we have to return. Currently we are
returning wLength, thus requests for a wLength greater than the amount
of data in the OS descriptor buffer would return invalid (albeit zero'd)
data following the valid descriptor data. Fix this by counting the
number of bytes when constructing the data and using this when
determining the length of the request.
Signed-off-by: Chris Dickens <christopher.a.dickens@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes in 4.14.28
net: phy: fix resume handling
net: phy: Restore phy_resume() locking assumption
x86: Treat R_X86_64_PLT32 as R_X86_64_PC32
ASoC: sun4i-i2s: Fix RX slot number of SUN8I
ASoC: sgtl5000: Fix suspend/resume
ASoC: wm_adsp: For TLV controls only register TLV get/set
ASoC: rt5651: Fix regcache sync errors on resume
usb: host: xhci-rcar: add support for r8a77965
xhci: Fix front USB ports on ASUS PRIME B350M-A
xhci: fix endpoint context tracer output
serial: sh-sci: prevent lockup on full TTY buffers
tty/serial: atmel: add new version check for usart
uas: fix comparison for error code
staging: comedi: fix comedi_nsamples_left.
staging: android: ashmem: Fix lockdep issue during llseek
USB: storage: Add JMicron bridge 152d:2567 to unusual_devs.h
usbip: vudc: fix null pointer dereference on udc->lock
usb: quirks: add control message delay for 1b1c:1b20
usb: usbmon: Read text within supplied buffer size
usb: gadget: f_fs: Fix use-after-free in ffs_fs_kill_sb()
usb: dwc3: Fix lock-up on ID change during system suspend/resume
serial: 8250_pci: Add Brainboxes UC-260 4 port serial device
serial: core: mark port as initialized in autoconfig
earlycon: add reg-offset to physical address before mapping
dm mpath: fix passing integrity data
Revert "btrfs: use proper endianness accessors for super_copy"
drm/edid: set ELD connector type in drm_edid_to_eld()
dma-buf/fence: Fix lock inversion within dma-fence-array
video/hdmi: Allow "empty" HDMI infoframes
HID: multitouch: Only look at non touch fields in first packet of a frame
HID: elo: clear BTN_LEFT mapping
iwlwifi: mvm: rs: don't override the rate history in the search cycle
ARM: dts: koelsch: Move cec_clock to root node
clk: meson: gxbb: fix wrong clock for SARADC/SANA
ARM: dts: exynos: Correct Trats2 panel reset line
drm/amdgpu: fix get_max_engine_clock_in_mhz
staging: rtl8822be: fix missing null check on dev_alloc_skb return
typec: tcpm: fusb302: Resolve out of order messaging events
USB: ledtrig-usbport: fix of-node leak
sched: Stop switched_to_rt() from sending IPIs to offline CPUs
sched: Stop resched_cpu() from sending IPIs to offline CPUs
crypto: ecc - Fix NULL pointer deref. on no default_rng
crypto: cavium - fix memory leak on info
test_firmware: fix setting old custom fw path back on exit
net: ieee802154: adf7242: Fix bug if defined DEBUG
rtc: brcmstb-waketimer: fix error handling in brcmstb_waketmr_probe()
net: xfrm: allow clearing socket xfrm policies.
mtd: nand: fix interpretation of NAND_CMD_NONE in nand_command[_lp]()
net: thunderx: Set max queue count taking XDP_TX into account
ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin
ARM: dts: omap3-n900: Fix the audio CODEC's reset pin
mtd: nand: ifc: update bufnum mask for ver >= 2.0.0
userns: Don't fail follow_automount based on s_user_ns
xfrm: Fix xfrm_replay_overflow_offload_esn
leds: pm8058: Silence pointer to integer size warning
power: supply: ab8500_charger: Fix an error handling path
power: supply: ab8500_charger: Bail out in case of error in 'ab8500_charger_init_hw_registers()'
drm/etnaviv: make THERMAL selectable
iio: adc: ina2xx: Shift bus voltage register to mask flag bits
iio: health: max30102: Add power enable parameter to get_temp function
ath10k: update tdls teardown state to target
cpufreq: Fix governor module removal race
drm/amdgpu:fix random missing of FLR NOTIFY
scsi: ses: don't ask for diagnostic pages repeatedly during probe
pwm: stmpe: Fix wrong register offset for hwpwm=2 case
drm/sun4i: Fix format mask in DE2 driver
pinctrl: sh-pfc: r8a7791: Add can_clk function
pinctrl: sh-pfc: r8a7795-es1: Fix MOD_SEL1 bit[25:24] to 0x3 when using STP_ISEN_1_D
perf annotate: Fix unnecessary memory allocation for s390x
perf annotate: Fix objdump comment parsing for Intel mov dissassembly
iwlwifi: mvm: avoid dumping assert log when device is stopped
drm/amdgpu:fix virtual dce bug
clk: qcom: msm8916: fix mnd_width for codec_digcodec
mwifiex: cfg80211: do not change virtual interface during scan processing
ath10k: fix invalid STS_CAP_OFFSET_MASK
tools/usbip: fixes build with musl libc toolchain
spi: sun6i: disable/unprepare clocks on remove
bnxt_en: Don't print "Link speed -1 no longer supported" messages.
scsi: core: scsi_get_device_flags_keyed(): Always return device flags
scsi: devinfo: apply to HP XP the same flags as Hitachi VSP
scsi: dh: add new rdac devices
media: vsp1: Prevent suspending and resuming DRM pipelines
dm raid: fix raid set size revalidation
media: cpia2: Fix a couple off by one bugs
media: davinci: vpif_capture: add NULL check on devm_kzalloc return value
virtio_net: Disable interrupts if napi_complete_done rescheduled napi
net: sched: drop qdisc_reset from dev_graft_qdisc
veth: set peer GSO values
drm/amdkfd: Fix memory leaks in kfd topology
powerpc/modules: Don't try to restore r2 after a sibling call
powerpc/64: Don't trace irqs-off at interrupt return to soft-disabled context
arm64: dts: renesas: salvator-common: Add EthernetAVB PHY reset
agp/intel: Flush all chipset writes after updating the GGTT
mac80211_hwsim: enforce PS_MANUAL_POLL to be set after PS_ENABLED
mac80211: remove BUG() when interface type is invalid
crypto: caam/qi - use correct print specifier for size_t
ASoC: nuc900: Fix a loop timeout test
mmc: mmc_test: Ensure command queue is disabled for testing
Fix misannotated out-of-line _copy_to_user()
ipvlan: add L2 check for packets arriving via virtual devices
rcutorture/configinit: Fix build directory error message
locking/locktorture: Fix num reader/writer corner cases
ima: relax requiring a file signature for new files with zero length
IB/mlx5: revisit -Wmaybe-uninitialized warning
dmaengine: qcom_hidma: check pending interrupts
drm/i915/glk: Disable Guc and HuC on GLK
Linux 4.14.28
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit cb88a0588717ba6c756cb5972d75766b273a6817 upstream.
Corsair Strafe RGB keyboard does not respond to usb control messages
sometimes and hence generates timeouts.
Commit de3af5bf25 ("usb: quirks: add delay init quirk for Corsair
Strafe RGB keyboard") tried to fix those timeouts by adding
USB_QUIRK_DELAY_INIT.
Unfortunately, even with this quirk timeouts of usb_control_msg()
can still be seen, but with a lower frequency (approx. 1 out of 15):
[ 29.103520] usb 1-8: string descriptor 0 read error: -110
[ 34.363097] usb 1-8: can't set config #1, error -110
Adding further delays to different locations where usb control
messages are issued just moves the timeouts to other locations,
e.g.:
[ 35.400533] usbhid 1-8:1.0: can't add hid device: -110
[ 35.401014] usbhid: probe of 1-8:1.0 failed with error -110
The only way to reliably avoid those issues is having a pause after
each usb control message. In approx. 200 boot cycles no more timeouts
were seen.
Addionaly, keep USB_QUIRK_DELAY_INIT as it turned out to be necessary
to have the delay in hub_port_connect() after hub_port_init().
The overall boot time seems not to be influenced by these additional
delays, even on fast machines and lightweight distributions.
Fixes: de3af5bf25 ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard")
Cc: stable@vger.kernel.org
Signed-off-by: Danilo Krummrich <danilokrummrich@dk-develop.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes in 4.14.7
net: qmi_wwan: add Quectel BG96 2c7c:0296
net: thunderx: Fix TCP/UDP checksum offload for IPv6 pkts
net: thunderx: Fix TCP/UDP checksum offload for IPv4 pkts
net: realtek: r8169: implement set_link_ksettings()
s390/qeth: fix early exit from error path
tipc: fix memory leak in tipc_accept_from_sock()
vhost: fix skb leak in handle_rx()
rds: Fix NULL pointer dereference in __rds_rdma_map
sit: update frag_off info
tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb()
packet: fix crash in fanout_demux_rollover()
net/packet: fix a race in packet_bind() and packet_notifier()
tcp: remove buggy call to tcp_v6_restore_cb()
usbnet: fix alignment for frames with no ethernet header
net: remove hlist_nulls_add_tail_rcu()
stmmac: reset last TSO segment size after device open
tcp/dccp: block bh before arming time_wait timer
s390/qeth: build max size GSO skbs on L2 devices
s390/qeth: fix thinko in IPv4 multicast address tracking
s390/qeth: fix GSO throughput regression
tcp: use IPCB instead of TCP_SKB_CB in inet_exact_dif_match()
tipc: call tipc_rcv() only if bearer is up in tipc_udp_recv()
tcp: use current time in tcp_rcv_space_adjust()
net: sched: cbq: create block for q->link.block
tap: free skb if flags error
tcp: when scheduling TLP, time of RTO should account for current ACK
tun: free skb in early errors
net: ipv6: Fixup device for anycast routes during copy
tun: fix rcu_read_lock imbalance in tun_build_skb
net: accept UFO datagrams from tuntap and packet
net: openvswitch: datapath: fix data type in queue_gso_packets
cls_bpf: don't decrement net's refcount when offload fails
sctp: use right member as the param of list_for_each_entry
ipmi: Stop timers before cleaning up the module
usb: gadget: ffs: Forbid usb_ep_alloc_request from sleeping
fcntl: don't cap l_start and l_end values for F_GETLK64 in compat syscall
fix kcm_clone()
KVM: arm/arm64: vgic-its: Preserve the revious read from the pending table
kbuild: do not call cc-option before KBUILD_CFLAGS initialization
powerpc/powernv/idle: Round up latency and residency values
ipvlan: fix ipv6 outbound device
ide: ide-atapi: fix compile error with defining macro DEBUG
blk-mq: Avoid that request queue removal can trigger list corruption
nvmet-rdma: update queue list during ib_device removal
audit: Allow auditd to set pid to 0 to end auditing
audit: ensure that 'audit=1' actually enables audit for PID 1
dm raid: fix panic when attempting to force a raid to sync
md: free unused memory after bitmap resize
RDMA/cxgb4: Annotate r2 and stag as __be32
x86/intel_rdt: Fix potential deadlock during resctrl unmount
media: dvb-core: always call invoke_release() in fe_free()
dvb_frontend: don't use-after-free the frontend struct
Linux 4.14.7
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add a pointer to the usb_function inside the
usb_function_instance structure to service
functions specific setup requests even before
the function gets added to the usb_gadget
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: I6f457006f6c5516cc6986ec2acdf5b1ecf259d0c
Move the entire contents of linux/usb/f_accessory.h header to uapi,
it only contains a userspace interface.
Change-Id: Ieb5547da449588ae554988a201c0e6b4e3afc531
Signed-off-by: Colin Cross <ccross@android.com>
The control request will be used by the host to enable/disable USB audio
and the ioctl will be used by userspace to read the audio mode
Change-Id: I81c38611b588451e80eacdccc417ca6e11c60cab
Signed-off-by: Mike Lockwood <lockwood@google.com>
USB accessory mode allows users to connect USB host hardware
specifically designed for Android-powered devices. The accessories
must adhere to the Android accessory protocol outlined in the
http://accessories.android.com documentation. This allows
Android devices that cannot act as a USB host to still interact with
USB hardware. When an Android device is in USB accessory mode, the
attached Android USB accessory acts as the host, provides power
to the USB bus, and enumerates connected devices.
Change-Id: I67964b50d278f3c0471d47efbb7b0973a3502681
Signed-off-by: Mike Lockwood <lockwood@android.com>
[AmitP: Folded following android-4.9 commit changes into this patch
ceb2f0aac624 ("ANDROID: usb: gadget: accessory: Fix section mismatch")
Parts of e27543931009 ("ANDROID: usb: gadget: Fixes and hacks to make android usb gadget compile on 3.8")
1b07ec751563 ("ANDROID: drivers: usb: gadget: 64-bit related type fixes")]
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
This CL adds a new class to monitor and change
dual role usb ports from userspace. The usb
phy drivers can register to the dual_role_usb
class and expose the capabilities of the ports.
The phy drivers can decide on whether a specific
attribute can be changed from userspace by
choosing to implement the appropriate callback.
Cherry-picked from
https://android-review.googlesource.com/#/c/167310/
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Bug: 21615151
Change-Id: Id1c4aaa97e898264d7006381a7badd029b5d9789
[AmitP: Folded following android-4.9 commit changes into this patch
9a9b1687f974 ("ANDROID: usb: phy: fix dual role sysfs build if kernel modules are supported")
35667e6f7d57 ("ANDROID: usb: dual-role: make stub functions inline")]
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
[ Upstream commit a4abd7a80addb4a9547f7dfc7812566b60ec505c ]
The qmi_wwan minidriver support a 'raw-ip' mode where frames are
received without any ethernet header. This causes alignment issues
because the skbs allocated by usbnet are "IP aligned".
Fix by allowing minidrivers to disable the additional alignment
offset. This is implemented using a per-device flag, since the same
minidriver also supports 'ethernet' mode.
Fixes: 32f7adf633 ("net: qmi_wwan: support "raw IP" mode")
Reported-and-tested-by: Jay Foster <jay@systech.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the USB phy NULL checking before issuing usb_phy_set_charger_current()
to avoid unchecked dereference warning.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NVIDIA Tegra20 UDC can't cope with unaligned DMA and require a USB gadget
quirk that avoids SKB buffer alignment to be set in order to make Ethernet
Gadget working. Later Tegra generations do not require that quirk. Let's
add a new platform data flag that allows to enable USB gadget quirk for
platforms that require it.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
This patch introduces the usb charger support based on usb phy that
makes an enhancement to a power driver. The basic conception of the
usb charger is that, when one usb charger is added or removed by
reporting from the extcon device state change, the usb charger will
report to power user to set the current limitation.
Power user can register a notifiee on the usb phy by issuing
usb_register_notifier() to get notified by charger status changes
or charger current changes.
we can notify what current to be drawn to power user according to
different charger type, and now we have 2 methods to get charger type.
One is get charger type from extcon subsystem, which also means the
charger state changes. Another is we can get the charger type from
USB controller detecting or PMIC detecting, and the charger state
changes should be told by issuing usb_phy_set_charger_state().
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
In the SG case this is already handled since a non-zero
request->num_mapped_sgs is a clear indicator that dma_map_sg()
had been called. While it would be nice to do the same for the
singly mapped case by simply checking for non-zero request->dma,
it's conceivable that 0 is a valid dma_addr_t handle. Hence add
a flag 'dma_mapped' to struct usb_request and use this to
determine the need to call dma_unmap_single(). Otherwise, if a
request is not DMA mapped then the result of calling
usb_request_unmap_request() would safely be a no-op.
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 4.13-rc2.
The usual batch, gadget fixes for reported issues, as well as xhci
fixes, and a small random collection of other fixes for reported
issues.
All have been in linux-next with no reported issues"
* tag 'usb-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
xhci: fix memleak in xhci_run()
usb: xhci: fix spinlock recursion for USB2 test mode
xhci: fix 20000ms port resume timeout
usb: xhci: Issue stop EP command only when the EP state is running
xhci: Bad Ethernet performance plugged in ASM1042A host
xhci: Fix NULL pointer dereference when cleaning up streams for removed host
usb: renesas_usbhs: gadget: disable all eps when the driver stops
usb: renesas_usbhs: fix usbhsc_resume() for !USBHSF_RUNTIME_PWCTRL
usb: gadget: udc: renesas_usb3: protect usb3_ep->started in usb3_start_pipen()
usb: gadget: udc: renesas_usb3: fix zlp transfer by the dmac
usb: gadget: udc: renesas_usb3: fix free size in renesas_usb3_dma_free_prd()
usb: gadget: f_uac2: endianness fixes.
usb: gadget: f_uac1: endianness fixes.
include: usb: audio: specify exact endiannes of descriptors
usb: gadget: udc: start_udc() can be static
usb: dwc2: gadget: On USB RESET reset device address to zero
usb: storage: return on error to avoid a null pointer dereference
usb: typec: include linux/device.h in ucsi.h
USB: cdc-acm: add device-id for quirky printer
usb: dwc3: gadget: only unmap requests from DMA if mapped
...
USB spec says that multiple byte fields are stored in
little-endian order (see chapter 8.1 of USB2.0 spec and
chapter 7.1 of USB3.0 spec), thus mark such fields as LE
for UAC1 and UAC2 headers
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Some firmwares in Huawei E3372H devices have been observed to switch back
to NTB 32-bit format after altsetting switch.
This patch implements a driver flag to check for the device settings and
set NTB format to 16-bit again if needed.
The flag has been activated for devices controlled by the huawei_cdc_ncm.c
driver.
V1->V2:
- fixed broken error checks
- some corrections to the commit message
V2->V3:
- variable name changes, to clarify what's happening
- check (and possibly set) the NTB format later in the common bind code path
Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
Reported-and-tested-by: Christian Panton <christian@panton.org>
Reviewed-by: Bjørn Mork <bjorn@mork.no>
CC: Bjørn Mork <bjorn@mork.no>
CC: Christian Panton <christian@panton.org>
CC: linux-usb@vger.kernel.org
CC: netdev@vger.kernel.org
CC: Oliver Neukum <oliver@neukum.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking updates from David Miller:
"Reasonably busy this cycle, but perhaps not as busy as in the 4.12
merge window:
1) Several optimizations for UDP processing under high load from
Paolo Abeni.
2) Support pacing internally in TCP when using the sch_fq packet
scheduler for this is not practical. From Eric Dumazet.
3) Support mutliple filter chains per qdisc, from Jiri Pirko.
4) Move to 1ms TCP timestamp clock, from Eric Dumazet.
5) Add batch dequeueing to vhost_net, from Jason Wang.
6) Flesh out more completely SCTP checksum offload support, from
Davide Caratti.
7) More plumbing of extended netlink ACKs, from David Ahern, Pablo
Neira Ayuso, and Matthias Schiffer.
8) Add devlink support to nfp driver, from Simon Horman.
9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa
Prabhu.
10) Add stack depth tracking to BPF verifier and use this information
in the various eBPF JITs. From Alexei Starovoitov.
11) Support XDP on qed device VFs, from Yuval Mintz.
12) Introduce BPF PROG ID for better introspection of installed BPF
programs. From Martin KaFai Lau.
13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann.
14) For loads, allow narrower accesses in bpf verifier checking, from
Yonghong Song.
15) Support MIPS in the BPF selftests and samples infrastructure, the
MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David
Daney.
16) Support kernel based TLS, from Dave Watson and others.
17) Remove completely DST garbage collection, from Wei Wang.
18) Allow installing TCP MD5 rules using prefixes, from Ivan
Delalande.
19) Add XDP support to Intel i40e driver, from Björn Töpel
20) Add support for TC flower offload in nfp driver, from Simon
Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub
Kicinski, and Bert van Leeuwen.
21) IPSEC offloading support in mlx5, from Ilan Tayari.
22) Add HW PTP support to macb driver, from Rafal Ozieblo.
23) Networking refcount_t conversions, From Elena Reshetova.
24) Add sock_ops support to BPF, from Lawrence Brako. This is useful
for tuning the TCP sockopt settings of a group of applications,
currently via CGROUPs"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits)
net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap
cxgb4: Support for get_ts_info ethtool method
cxgb4: Add PTP Hardware Clock (PHC) support
cxgb4: time stamping interface for PTP
nfp: default to chained metadata prepend format
nfp: remove legacy MAC address lookup
nfp: improve order of interfaces in breakout mode
net: macb: remove extraneous return when MACB_EXT_DESC is defined
bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case
bpf: fix return in load_bpf_file
mpls: fix rtm policy in mpls_getroute
net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t
net, ax25: convert ax25_route.refcount from atomic_t to refcount_t
net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t
net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t
...
The CDC-NCM driver can require large amounts of memory to create
skb's and this can be a problem when the memory becomes fragmented.
This especially affects embedded systems that have constrained
resources but wish to maximise the throughput of CDC-NCM with 16KiB
NTB's.
The issue is after running for a while the kernel memory can become
fragmented and it needs compacting.
If the NTB allocation is needed before the memory has been compacted
the atomic allocation can fail which can cause increased latency,
large re-transmissions or disconnections depending upon the data
being transmitted at the time.
This situation occurs for less than a second until the kernel has
compacted the memory but the failed devices can take a lot longer to
recover from the failed TX packets.
To ease this temporary situation I modified the CDC-NCM TX path to
temporarily switch into a reduced memory mode which allocates an NTB
that will fit into a USB_CDC_NCM_NTB_MIN_OUT_SIZE (default 2048 Bytes)
sized memory block and only transmit NTB's with a single network frame
until the memory situation is resolved.
Each time this issue occurs we wait for an increasing number of
reduced size allocations before requesting a full size one to not
put additional pressure on a low memory system.
Once the memory is compacted the CDC-NCM data can resume transmitting
at the normal tx_max rate once again.
Signed-off-by: Jim Baxter <jim_baxter@mentor.com>
Reviewed-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Felipe writes:
usb: changes for v4.13 merge window
This time around we have a total of 57 non-merge commits. A list of
most important changes follows:
- Improvements to dwc3 tracing interface
- Initial dual-role support for dwc3
- Improvements to how we handle DMA resources in dwc3
- A new f_uac1 implementation which much more flexible
- Removal of AVR32 bits
- Improvements to f_mass_storage driver
Sometimes, the gadget driver we want to run has max_speed lower than
what the UDC supports. In such situations, UDC might want to make sure
we don't try to connect on speeds not supported by the gadget
driver (e.g. super-speed capable dwc3 with high-speed capable g_midi)
because that will just fail.
In order to make sure this situation never happens, we introduce a new
optional ->udc_set_speed() method which can be implemented by
interested UDC drivers.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
User space applications in some cases have the need to enforce a
specific port type(DFP/UFP/DRP). This change allows userspace to
attempt setting the desired port type. Low level drivers can
however reject the request if the specific port type is not supported.
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit allows a gadget that does not support SuperSpeed to indicate
that it supports LPM. It does this by setting the 'lpm_capable' flag in
the gadget structure.
If a gadget sets this, the composite gadget framework will set the
bcdUSB to 0x0201 to indicate that this supports BOS descriptors, and
also return a USB 2.0 Extension descriptor as part of the BOS descriptor
set.
See USB 2.0 LPM ECN Section 3.
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Sevak Arakelyan <sevaka@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Some devices need their multicast filter reset but others are crashed by that.
So the methods need to be separated.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: "Ridgway, Keith" <kridgway@harris.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to xHCI spec Figure 30: Interrupt Throttle Flow Diagram
If PCI Message Signaled Interrupts (MSI or MSI-X) are enabled,
then the assertion of the Interrupt Pending (IP) flag in Figure 30
generates a PCI Dword write. The IP flag is automatically cleared
by the completion of the PCI write.
the MSI enabled HCs don't need to clear interrupt pending bit, but
hcd->irq = 0 doesn't equal to MSI enabled HCD. At some Dual-role
controller software designs, it sets hcd->irq as 0 to avoid HCD
requesting interrupt, and they want to decide when to call usb_hcd_irq
by software.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Usually usb phy need register one extcon device to get the connection
notifications. It will remove some duplicate code if the extcon device
is registered using common code instead of each phy driver having its
own related extcon APIs. So we add one pointer of extcon device into
usb phy structure, and some other helper functions to register extcon.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
In some situations, e.g. when registering alternate modes for local typec
ports, it may be handy to use constant mode descriptors. Allow this by
changing the mode descriptor arguments of typec_port_register_altmode()
et.al. to using const pointers.
Signed-off-by: Mats Karrman <mats.dev.list@gmail.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull USB updates from Greg KH:
"Here is the big USB patchset for 4.12-rc1.
Lots of good stuff here, after many many many attempts, the kernel
finally has a working typeC interface, many thanks to Heikki and
Guenter and others who have taken the time to get this merged. It
wasn't an easy path for them at all.
There's also a staging driver that uses this new api, which is why
it's coming in through this tree.
Along with that, there's the usual huge number of changes for gadget
drivers, xhci, and other stuff. Johan also finally refactored pretty
much every driver that was looking at USB endpoints to do it in a
common way, which will help prevent any "badly-formed" devices from
causing problems in drivers. That too wasn't a simple task.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits)
staging: typec: Fairchild FUSB302 Type-c chip driver
staging: typec: Type-C Port Controller Interface driver (tcpci)
staging: typec: USB Type-C Port Manager (tcpm)
usb: host: xhci: remove #ifdef around PM functions
usb: musb: don't mark of_dev_auxdata as initdata
usb: misc: legousbtower: Fix buffers on stack
USB: Revert "cdc-wdm: fix "out-of-sync" due to missing notifications"
usb: Make sure usb/phy/of gets built-in
USB: storage: e-mail update in drivers/usb/storage/unusual_devs.h
usb: host: xhci: print correct command ring address
usb: host: xhci: delete sp_dma_buffers for scratchpad
usb: host: xhci: using correct specification chapter reference for DCBAAP
xhci: switch to pci_alloc_irq_vectors
usb: host: xhci-plat: set resume_quirk() for R-Car controllers
usb: host: xhci-plat: add resume_quirk()
usb: host: xhci-plat: enable clk in resume timing
usb: host: plat: Enable xHCI plat runtime PM
USB: serial: ftdi_sio: add device ID for Microsemi/Arrow SF2PLUS Dev Kit
USB: serial: constify static arrays
usb: fix some references for /proc/bus/usb
...
Pull networking updates from David Millar:
"Here are some highlights from the 2065 networking commits that
happened this development cycle:
1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri)
2) Add a generic XDP driver, so that anyone can test XDP even if they
lack a networking device whose driver has explicit XDP support
(me).
3) Sparc64 now has an eBPF JIT too (me)
4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei
Starovoitov)
5) Make netfitler network namespace teardown less expensive (Florian
Westphal)
6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana)
7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger)
8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky)
9) Multiqueue support in stmmac driver (Joao Pinto)
10) Remove TCP timewait recycling, it never really could possibly work
well in the real world and timestamp randomization really zaps any
hint of usability this feature had (Soheil Hassas Yeganeh)
11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay
Aleksandrov)
12) Add socket busy poll support to epoll (Sridhar Samudrala)
13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso,
and several others)
14) IPSEC hw offload infrastructure (Steffen Klassert)"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits)
tipc: refactor function tipc_sk_recv_stream()
tipc: refactor function tipc_sk_recvmsg()
net: thunderx: Optimize page recycling for XDP
net: thunderx: Support for XDP header adjustment
net: thunderx: Add support for XDP_TX
net: thunderx: Add support for XDP_DROP
net: thunderx: Add basic XDP support
net: thunderx: Cleanup receive buffer allocation
net: thunderx: Optimize CQE_TX handling
net: thunderx: Optimize RBDR descriptor handling
net: thunderx: Support for page recycling
ipx: call ipxitf_put() in ioctl error path
net: sched: add helpers to handle extended actions
qed*: Fix issues in the ptp filter config implementation.
qede: Fix concurrency issue in PTP Tx path processing.
stmmac: Add support for SIMATIC IOT2000 platform
net: hns: fix ethtool_get_strings overflow in hns driver
tcp: fix wraparound issue in tcp_lp
bpf, arm64: fix jit branch offset related to ldimm64
bpf, arm64: implement jiting of BPF_XADD
...
Pull documentation update from Jonathan Corbet:
"A reasonably busy cycle for documentation this time around. There is a
new guide for user-space API documents, rather sparsely populated at
the moment, but it's a start. Markus improved the infrastructure for
converting diagrams. Mauro has converted much of the USB documentation
over to RST. Plus the usual set of fixes, improvements, and tweaks.
There's a bit more than the usual amount of reaching out of
Documentation/ to fix comments elsewhere in the tree; I have acks for
those where I could get them"
* tag 'docs-4.12' of git://git.lwn.net/linux: (74 commits)
docs: Fix a couple typos
docs: Fix a spelling error in vfio-mediated-device.txt
docs: Fix a spelling error in ioctl-number.txt
MAINTAINERS: update file entry for HSI subsystem
Documentation: allow installing man pages to a user defined directory
Doc/PM: Sync with intel_powerclamp code behavior
zr364xx.rst: usb/devices is now at /sys/kernel/debug/
usb.rst: move documentation from proc_usb_info.txt to USB ReST book
convert philips.txt to ReST and add to media docs
docs-rst: usb: update old usbfs-related documentation
arm: Documentation: update a path name
docs: process/4.Coding.rst: Fix a couple of document refs
docs-rst: fix usb cross-references
usb: gadget.h: be consistent at kernel doc macros
usb: composite.h: fix two warnings when building docs
usb: get rid of some ReST doc build errors
usb.rst: get rid of some Sphinx errors
usb/URB.txt: convert to ReST and update it
usb/persist.txt: convert to ReST and add to driver-api book
usb/hotplug.txt: convert to ReST and add to driver-api book
...
Pull x86 debug updates from Ingo Molnar:
"The biggest update is the addition of USB3 debug port based
early-console.
Greg was fine with the USB changes and with the routing of these
patches:
https://www.spinics.net/lists/linux-usb/msg155093.html"
* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
usb/doc: Add document for USB3 debug port usage
usb/serial: Add DBC debug device support to usb_debug
x86/earlyprintk: Add support for earlyprintk via USB3 debug port
usb/early: Add driver for xhci debug capability
x86/timers: Add simple udelay calibration
Johan writes:
USB-serial updates for v4.12-rc1
Here are the USB-serial updates for 4.12, including:
- support for devices with up to 16 ports (e.g. some Moxa devices)
- support for endpoint sanity checks in core, which allows for code sharing
and avoids allocating resources for rejected interfaces
- support for endpoint-port remapping, which allows some driver hacks to
be removed as well as omninet to use the generic write implementation
- removal of an obsolete tty open-race workaround which prevented a
port from being opened immediately after having been registered
- generic-driver support for interfaces with just a bulk-in endpoint
- improved ftdi_sio event-char and latency-timer handling
- improved ftdi_sio support for some broken BM chips
Included are also various clean ups and a new ftdi_sio device id.
All have been in linux-next with no reported issues.
Signed-off-by: Johan Hovold <johan@kernel.org>
There's one value that use spaces instead of tabs to ident.
That causes the following warning:
./include/linux/usb/gadget.h:193: ERROR: Unexpected indentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
By definition, we use /* private: */ tag when we won't be documenting
a parameter. However, those two parameters are documented:
./include/linux/usb/composite.h:510: warning: Excess struct/union/enum/typedef member 'setup_pending' description in 'usb_composite_dev'
./include/linux/usb/composite.h:510: warning: Excess struct/union/enum/typedef member 'os_desc_pending' description in 'usb_composite_dev'
So, we need to use /* public: */ to avoid a warning.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
We need an space before a numbered list to avoid those warnings:
./drivers/usb/core/message.c:478: ERROR: Unexpected indentation.
./drivers/usb/core/message.c:479: WARNING: Block quote ends without a blank line; unexpected unindent.
./include/linux/usb/composite.h:455: ERROR: Unexpected indentation.
./include/linux/usb/composite.h:456: WARNING: Block quote ends without a blank line; unexpected unindent.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Felipe writes:
usb: changes for v4.12
With 51 non-merge commits, this is one of the smallest USB Gadget pull
requests. Apart from your expected set of non-critical fixes, and
other miscellaneous items, we have most of the changes in dwc3 (52.5%)
with all other UDCs following with 34.8%.
As for the actual changes, the most important of them are all the
recent changes to reduce memory footprint of dwc3, bare minimum
dual-role support on dwc3 and reworked endpoint count and
initialization routines.
If usb/otg-fsm.h and usb/composite.h are included together
then it results in the build warning [1].
Prevent that by defining VDBG locally.
Also get rid of MPC_LOC which doesn't seem to be used
by anyone.
[1] - warning fixed by this patch:
In file included from drivers/usb/dwc3/core.h:33,
from drivers/usb/dwc3/ep0.c:33:
include/linux/usb/otg-fsm.h:30:1: warning: "VDBG" redefined
In file included from drivers/usb/dwc3/ep0.c:31:
include/linux/usb/composite.h:615:1: warning: this is the location
of the previous definition
Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
Acked-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Mostly simple cases of overlapping changes (adding code nearby,
a function whose name changes, for example).
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for the net stats64 counters to the usbnet core. With that
in place put the hooks into every usbnet driver to use it.
This is a strait forward addition of 64bit counters for RX and TX packet
and byte counts. It is done in the same style as for the other net drivers
that support stats64. Note that the other stats fields remain as 32bit
sized values (error counts, etc).
The motivation to add this is that it is not particularly difficult to
get the RX and TX byte counts to wrap on 32bit platforms.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a calc_num_ports callback to the generic driver and verify that the
device has the required endpoints there instead of in core.
Note that the generic driver num_ports field was never used.
Signed-off-by: Johan Hovold <johan@kernel.org>
Allow subdrivers to modify the port-endpoint mapping by passing the
endpoint descriptors to calc_num_ports.
The callback can now also be used to verify that the required endpoints
exists and abort probing otherwise.
This will allow us to get rid of a few hacks in subdrivers that are
already modifying the port-endpoint mapping (or aborting probe due to
missing endpoints), but only after the port structures have been setup.
Signed-off-by: Johan Hovold <johan@kernel.org>
This resolves a merge issue in the gadget code, and we want the USB
fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The purpose of USB Type-C connector class is to provide
unified interface for the user space to get the status and
basic information about USB Type-C connectors on a system,
control over data role swapping, and when the port supports
USB Power Delivery, also control over power role swapping
and Alternate Modes.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-and-Tested-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
