Changes in 4.14.31
MIPS: ralink: Remove ralink_halt()
MIPS: ralink: Fix booting on MT7621
MIPS: lantiq: Fix Danube USB clock
MIPS: lantiq: Enable AHB Bus for USB
MIPS: lantiq: ase: Enable MFD_SYSCON
iio: chemical: ccs811: Corrected firmware boot/application mode transition
iio: st_pressure: st_accel: pass correct platform data to init
iio: adc: meson-saradc: unlock on error in meson_sar_adc_lock()
ALSA: usb-audio: Fix parsing descriptor of UAC2 processing unit
ALSA: aloop: Sync stale timer before release
ALSA: aloop: Fix access to not-yet-ready substream via cable
ALSA: hda - Force polling mode on CFL for fixing codec communication
ALSA: hda/realtek - Fix speaker no sound after system resume
ALSA: hda/realtek - Fix Dell headset Mic can't record
ALSA: hda/realtek - Always immediately update mute LED with pin VREF
mmc: core: Fix tracepoint print of blk_addr and blksz
mmc: core: Disable HPI for certain Micron (Numonyx) eMMC cards
mmc: block: fix updating ext_csd caches on ioctl call
mmc: dw_mmc: Fix the DTO/CTO timeout overflow calculation for 32-bit systems
mmc: dw_mmc: exynos: fix the suspend/resume issue for exynos5433
mmc: dw_mmc: fix falling from idmac to PIO mode when dw_mci_reset occurs
PCI: Add function 1 DMA alias quirk for Highpoint RocketRAID 644L
ahci: Add PCI-id for the Highpoint Rocketraid 644L card
lockdep: fix fs_reclaim warning
clk: bcm2835: Fix ana->maskX definitions
clk: bcm2835: Protect sections updating shared registers
clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops
RDMA/mlx5: Fix crash while accessing garbage pointer and freed memory
Drivers: hv: vmbus: Fix ring buffer signaling
pinctrl: samsung: Validate alias coming from DT
Bluetooth: btusb: Remove Yoga 920 from the btusb_needs_reset_resume_table
Bluetooth: btusb: Add Dell OptiPlex 3060 to btusb_needs_reset_resume_table
Bluetooth: btusb: Fix quirk for Atheros 1525/QCA6174
libata: fix length validation of ATAPI-relayed SCSI commands
libata: remove WARN() for DMA or PIO command without data
libata: don't try to pass through NCQ commands to non-NCQ devices
libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs
libata: disable LPM for Crucial BX100 SSD 500GB drive
libata: Enable queued TRIM for Samsung SSD 860
libata: Apply NOLPM quirk to Crucial M500 480 and 960GB SSDs
libata: Make Crucial BX100 500GB LPM quirk apply to all firmware versions
libata: Modify quirks for MX100 to limit NCQ_TRIM quirk to MU01 version
cgroup: fix rule checking for threaded mode switching
nfsd: remove blocked locks on client teardown
hugetlbfs: check for pgoff value overflow
h8300: remove extraneous __BIG_ENDIAN definition
mm/vmalloc: add interfaces to free unmapped page table
x86/mm: implement free pmd/pte page interfaces
mm/khugepaged.c: convert VM_BUG_ON() to collapse fail
mm/thp: do not wait for lock_page() in deferred_split_scan()
mm/shmem: do not wait for lock_page() in shmem_unused_huge_shrink()
Revert "mm: page_alloc: skip over regions of invalid pfns where possible"
drm/vmwgfx: Fix black screen and device errors when running without fbdev
drm/vmwgfx: Fix a destoy-while-held mutex problem.
drm/radeon: Don't turn off DP sink when disconnected
drm: Reject getfb for multi-plane framebuffers
drm: udl: Properly check framebuffer mmap offsets
mm/vmscan: wake up flushers for legacy cgroups too
acpi, numa: fix pxm to online numa node associations
ACPI / watchdog: Fix off-by-one error at resource assignment
libnvdimm, {btt, blk}: do integrity setup before add_disk()
brcmfmac: fix P2P_DEVICE ethernet address generation
rtlwifi: rtl8723be: Fix loss of signal
tracing: probeevent: Fix to support minus offset from symbol
mtdchar: fix usage of mtd_ooblayout_ecc()
mtd: nand: fsl_ifc: Fix nand waitfunc return value
mtd: nand: fsl_ifc: Fix eccstat array overflow for IFC ver >= 2.0.0
mtd: nand: fsl_ifc: Read ECCSTAT0 and ECCSTAT1 registers for IFC 2.0
staging: ncpfs: memory corruption in ncp_read_kernel()
can: peak/pcie_fd: fix echo_skb is occupied! bug
can: peak/pcie_fd: remove useless code when interface starts
can: ifi: Repair the error handling
can: ifi: Check core revision upon probe
can: cc770: Fix stalls on rt-linux, remove redundant IRQ ack
can: cc770: Fix queue stall & dropped RTR reply
can: cc770: Fix use after free in cc770_tx_interrupt()
tty: vt: fix up tabstops properly
x86/entry/64: Don't use IST entry for #BP stack
selftests/x86/ptrace_syscall: Fix for yet more glibc interference
x86/vsyscall/64: Use proper accessor to update P4D entry
x86/efi: Free efi_pgd with free_pages()
posix-timers: Protect posix clock array access against speculation
kvm/x86: fix icebp instruction handling
x86/build/64: Force the linker to use 2MB page size
x86/boot/64: Verify alignment of the LOAD segment
drm/syncobj: Stop reusing the same struct file for all syncobj -> fd
perf/x86/intel/uncore: Fix Skylake UPI event format
perf stat: Fix CVS output format for non-supported counters
perf/core: Fix ctx_event_type in ctx_resched()
perf/x86/intel: Don't accidentally clear high bits in bdw_limit_period()
perf/x86/intel/uncore: Fix multi-domain PCI CHA enumeration bug on Skylake servers
iio: ABI: Fix name of timestamp sysfs file
iio: imu: st_lsm6dsx: fix endianness in st_lsm6dsx_read_oneshot()
staging: android: ion: Zero CMA allocated memory
staging: lustre: ptlrpc: kfree used instead of kvfree
usb: xhci: Disable slot even when virt-dev is null
usb: xhci: Fix potential memory leak in xhci_disable_slot()
x86/pkeys/selftests: Rename 'si_pkey' to 'siginfo_pkey'
kbuild: disable clang's default use of -fmerge-all-constants
bpf: skip unnecessary capability check
bpf, x64: increase number of passes
Linux 4.14.31
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit a6618f4aedb2b60932d766bd82ae7ce866e842aa upstream.
Currently, the offsets in the UAC2 processing unit descriptor are
calculated incorrectly. It causes an issue when connecting the device which
provides such a feature:
~~~~
[84126.724420] usb 1-1.3.1: invalid Processing Unit descriptor (id 18)
~~~~
After this patch is applied, the UAC2 processing unit inits w/o this error.
Fixes: 23caaf19b1 ("ALSA: usb-mixer: Add support for Audio Class v2.0")
Signed-off-by: Kirill Marinushkin <k.marinushkin@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes in 4.14.5
drm/fsl-dcu: avoid disabling pixel clock twice on suspend
drm/fsl-dcu: enable IRQ before drm_atomic_helper_resume()
drm/amdgpu: Use unsigned ring indices in amdgpu_queue_mgr_map
s390/runtime instrumentation: simplify task exit handling
usbip: fix usbip attach to find a port that matches the requested speed
usbip: Fix USB device hang due to wrong enabling of scatter-gather
uas: Always apply US_FL_NO_ATA_1X quirk to Seagate devices
usb: quirks: Add no-lpm quirk for KY-688 USB 3.1 Type-C Hub
serial: 8250_pci: Add Amazon PCI serial device ID
ANDROID: binder: fix transaction leak.
USB: serial: option: add Quectel BG96 id
USB: serial: usb_debug: add new USB device id
serial: 8250_early: Only set divisor if valid clk & baud
MIPS: Add custom serial.h with BASE_BAUD override for generic kernel
ima: fix hash algorithm initialization
s390: vfio-ccw: Do not attempt to free no-op, test and tic cda.
PM / Domains: Fix genpd to deal with drivers returning 1 from ->prepare()
s390/pci: do not require AIS facility
selftests/x86/ldt_get: Add a few additional tests for limits
selftests/x86/ldt_gdt: Robustify against set_thread_area() and LAR oddities
staging: greybus: loopback: Fix iteration count on async path
m68k: fix ColdFire node shift size calculation
serial: 8250_fintek: Fix rs485 disablement on invalid ioctl()
staging: rtl8822be: fix wrong dma unmap len
staging: rtl8188eu: avoid a null dereference on pmlmepriv
spi: sh-msiof: Fix DMA transfer size check
spi: spi-axi: fix potential use-after-free after deregistration
mmc: tmio: check mmc_regulator_get_supply return value
mmc: sdhci-msm: fix issue with power irq
hwmon: (pmbus/core) Prevent unintentional setting of page to 0xFF
perf/core: Fix __perf_read_group_add() locking
usb: phy: tahvo: fix error handling in tahvo_usb_probe()
PCI: dra7xx: Create functional dependency between PCIe and PHY
x86/intel_rdt: Initialize bitmask of shareable resource if CDP enabled
x86/intel_rdt: Fix potential deadlock during resctrl mount
serial: 8250: Preserve DLD[7:4] for PORT_XR17V35X
kprobes: Use synchronize_rcu_tasks() for optprobe with CONFIG_PREEMPT=y
x86/entry: Use SYSCALL_DEFINE() macros for sys_modify_ldt()
clocksource/drivers/arm_arch_timer: Validate CNTFRQ after enabling frame
dt-bindings: timer: renesas, cmt: Fix SoC-specific compatible values
EDAC, sb_edac: Fix missing break in switch
usb: mtu3: fix error return code in ssusb_gadget_init()
staging: fsl-dpaa2/eth: Account for Rx FD buffers on error path
staging: rtl8822be: Keep array subscript no lower than zero
ARM: cpuidle: Correct driver unregistration if init fails
usb: xhci: Return error when host is dead in xhci_disable_slot()
sysrq : fix Show Regs call trace on ARM
serial: sh-sci: suppress warning for ports without dma channels
usbip: tools: Install all headers needed for libusbip development
serial: imx: Update cached mctrl value when changing RTS
staging: fsl-mc/dpio: Fix incorrect comparison
perf test attr: Fix ignored test case result
perf test attr: Fix python error on empty result
kprobes/x86: Disable preemption in ftrace-based jprobes
locking/refcounts, x86/asm: Use unique .text section for refcount exceptions
s390/ptrace: fix guarded storage regset handling
tools include: Do not use poison with C++
perf tools: Fix leaking rec_argv in error cases
mm, x86/mm: Fix performance regression in get_user_pages_fast()
iio: adc: ti-ads1015: add 10% to conversion wait time
iio: multiplexer: add NULL check on devm_kzalloc() and devm_kmemdup() return values
locking/refcounts, x86/asm: Enable CONFIG_ARCH_HAS_REFCOUNT
powerpc/jprobes: Disable preemption when triggered through ftrace
powerpc/kprobes: Disable preemption before invoking probe handler for optprobes
dma-buf/sw_sync: force signal all unsignaled fences on dying timeline
staging: ccree: fix leak of import() after init()
usb: hub: Cycle HUB power when initialization fails
USB: ulpi: fix bus-node lookup
xhci: Don't show incorrect WARN message about events for empty rings
usb: xhci: fix panic in xhci_free_virt_devices_depth_first
USB: core: Add type-specific length check of BOS descriptors
USB: usbfs: Filter flags passed in from user space
usb: host: fix incorrect updating of offset
locking/refcounts: Do not force refcount_t usage as GPL-only export
Linux 4.14.5
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Move the entire contents of linux/usb/f_accessory.h header to uapi,
it only contains a userspace interface.
Change-Id: Ieb5547da449588ae554988a201c0e6b4e3afc531
Signed-off-by: Colin Cross <ccross@android.com>
commit 81cf4a45360f70528f1f64ba018d61cb5767249a upstream.
As most of BOS descriptors are longer in length than their header
'struct usb_dev_cap_header', comparing solely with it is not sufficient
to avoid out-of-bounds access to BOS descriptors.
This patch adds descriptor type specific length check in
usb_get_bos_descriptor() to fix the issue.
Signed-off-by: Masakazu Mokuno <masakazu.mokuno@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many user space API headers have licensing information, which is either
incomplete, badly formatted or just a shorthand for referring to the
license under which the file is supposed to be. This makes it hard for
compliance tools to determine the correct license.
Update these files with an SPDX license identifier. The identifier was
chosen based on the license information in the file.
GPL/LGPL licensed headers get the matching GPL/LGPL SPDX license
identifier with the added 'WITH Linux-syscall-note' exception, which is
the officially assigned exception identifier for the kernel syscall
exception:
NOTE! This copyright does *not* cover user programs that use kernel
services by normal system calls - this is merely considered normal use
of the kernel, and does *not* fall under the heading of "derived work".
This exception makes it possible to include GPL headers into non GPL
code, without confusing license compliance tools.
Headers which have either explicit dual licensing or are just licensed
under a non GPL license are updated with the corresponding SPDX
identifier and the GPLv2 with syscall exception identifier. The format
is:
((GPL-2.0 WITH Linux-syscall-note) OR SPDX-ID-OF-OTHER-LICENSE)
SPDX license identifiers are a legally binding shorthand, which can be
used instead of the full boiler plate text. The update does not remove
existing license information as this has to be done on a case by case
basis and the copyright holders might have to be consulted. This will
happen in a separate step.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne. See the previous patch in this series for the
methodology of how this patch was researched.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many user space API headers are missing licensing information, which
makes it hard for compliance tools to determine the correct license.
By default are files without license information under the default
license of the kernel, which is GPLV2. Marking them GPLV2 would exclude
them from being included in non GPLV2 code, which is obviously not
intended. The user space API headers fall under the syscall exception
which is in the kernels COPYING file:
NOTE! This copyright does *not* cover user programs that use kernel
services by normal system calls - this is merely considered normal use
of the kernel, and does *not* fall under the heading of "derived work".
otherwise syscall usage would not be possible.
Update the files which contain no license information with an SPDX
license identifier. The chosen identifier is 'GPL-2.0 WITH
Linux-syscall-note' which is the officially assigned identifier for the
Linux syscall exception. SPDX license identifiers are a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne. See the previous patch in this series for the
methodology of how this patch was researched.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrey Konovalov reported a possible out-of-bounds problem for a USB interface
association descriptor. He writes:
It seems there's no proper size check of a USB_DT_INTERFACE_ASSOCIATION
descriptor. It's only checked that the size is >= 2 in
usb_parse_configuration(), so find_iad() might do out-of-bounds access
to intf_assoc->bInterfaceCount.
And he's right, we don't check for crazy descriptors of this type very well, so
resolve this problem. Yet another issue found by syzkaller...
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introducing USB charger type and state definition can help
to support USB charging which will be added in USB phy core.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
USB spec says that multiple byte fields are stored in
little-endian order (see chapter 8.1 of USB2.0 spec and
chapter 7.1 of USB3.0 spec), thus mark such fields as LE
for UAC1 and UAC2 headers
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Felipe writes:
usb: changes for v4.13 merge window
This time around we have a total of 57 non-merge commits. A list of
most important changes follows:
- Improvements to dwc3 tracing interface
- Initial dual-role support for dwc3
- Improvements to how we handle DMA resources in dwc3
- A new f_uac1 implementation which much more flexible
- Removal of AVR32 bits
- Improvements to f_mass_storage driver
This allows users to make an ioctl call as the first action on a
connection. Ex, some functions might want to get endpoint size
before making any i/os.
Previously, calling ioctls before read/write would depending on the
timing of endpoints being enabled.
ESHUTDOWN is now a possible return value and ENODEV is not, so change
docs accordingly.
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Jerry Zhang <zhangjerry@google.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Add define for the maximum number of ports on a SuperSpeed hub as per
USB 3.1 spec Table 10-5, and use it when verifying the retrieved hub
descriptor.
This specifically avoids benign attempts to update the DeviceRemovable
mask for non-existing ports (should we get that far).
Fixes: dbe79bbe9d ("USB 3.0 Hub Changes")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Regularly, when a new header is created in include/uapi/, the developer
forgets to add it in the corresponding Kbuild file. This error is usually
detected after the release is out.
In fact, all headers under uapi directories should be exported, thus it's
useless to have an exhaustive list.
After this patch, the following files, which were not exported, are now
exported (with make headers_install_all):
asm-arc/kvm_para.h
asm-arc/ucontext.h
asm-blackfin/shmparam.h
asm-blackfin/ucontext.h
asm-c6x/shmparam.h
asm-c6x/ucontext.h
asm-cris/kvm_para.h
asm-h8300/shmparam.h
asm-h8300/ucontext.h
asm-hexagon/shmparam.h
asm-m32r/kvm_para.h
asm-m68k/kvm_para.h
asm-m68k/shmparam.h
asm-metag/kvm_para.h
asm-metag/shmparam.h
asm-metag/ucontext.h
asm-mips/hwcap.h
asm-mips/reg.h
asm-mips/ucontext.h
asm-nios2/kvm_para.h
asm-nios2/ucontext.h
asm-openrisc/shmparam.h
asm-parisc/kvm_para.h
asm-powerpc/perf_regs.h
asm-sh/kvm_para.h
asm-sh/ucontext.h
asm-tile/shmparam.h
asm-unicore32/shmparam.h
asm-unicore32/ucontext.h
asm-x86/hwcap2.h
asm-xtensa/kvm_para.h
drm/armada_drm.h
drm/etnaviv_drm.h
drm/vgem_drm.h
linux/aspeed-lpc-ctrl.h
linux/auto_dev-ioctl.h
linux/bcache.h
linux/btrfs_tree.h
linux/can/vxcan.h
linux/cifs/cifs_mount.h
linux/coresight-stm.h
linux/cryptouser.h
linux/fsmap.h
linux/genwqe/genwqe_card.h
linux/hash_info.h
linux/kcm.h
linux/kcov.h
linux/kfd_ioctl.h
linux/lightnvm.h
linux/module.h
linux/nbd-netlink.h
linux/nilfs2_api.h
linux/nilfs2_ondisk.h
linux/nsfs.h
linux/pr.h
linux/qrtr.h
linux/rpmsg.h
linux/sched/types.h
linux/sed-opal.h
linux/smc.h
linux/smc_diag.h
linux/stm.h
linux/switchtec_ioctl.h
linux/vfio_ccw.h
linux/wil6210_uapi.h
rdma/bnxt_re-abi.h
Note that I have removed from this list the files which are generated in every
exported directories (like .install or .install.cmd).
Thanks to Julien Floret <julien.floret@6wind.com> for the tip to get all
subdirs with a pure makefile command.
For the record, note that exported files for asm directories are a mix of
files listed by:
- include/uapi/asm-generic/Kbuild.asm;
- arch/<arch>/include/uapi/asm/Kbuild;
- arch/<arch>/include/asm/Kbuild.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Mark Salter <msalter@redhat.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The code was fixed in
commit 53642399aa ("usb: gadget: f_fs: Fix wrong check on reserved1 wof OS_DESC_EXT_COMPAT")
but the in-header documentation kept referencing 0 as the expected value.
Reference 1 instead as per original commit message.
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
When FUNCTIONFS_EVENTFD flag is set, __ffs_data_got_descs reads a 32bits,
little-endian value right after the fixed structure header, and passes it
to eventfd_ctx_fdget. Document this.
Also, rephrase a comment to be affirmative about the role of string
descriptor at index 0. Ref: USB 2.0 spec paragraph "9.6.7 String", and
also checked to still be current in USB 3.0 spec paragraph "9.6.9 String".
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Now that we have a helper to gather periodic
endpoints' multiplier bits from wMaxPacketSize and
every driver is using it, we can safely make sure
that usb_endpoint_maxp() returns only bits 10:0 of
wMaxPacketSize which is where the actual packet size
lies.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
According to USB Specification 2.0 table 9-4,
wMaxPacketSize is a bitfield. Endpoint's maxpacket
is laid out in bits 10:0. For high-speed,
high-bandwidth isochronous endpoints, bits 12:11
contain a multiplier to tell us how many
transactions we want to try per uframe.
This means that if we want an isochronous endpoint
to issue 3 transfers of 1024 bytes per uframe,
wMaxPacketSize should contain the value:
1024 | (2 << 11)
or 5120 (0x1400). In order to make Host and
Peripheral controller drivers' life easier, we're
adding a helper which returns bits 12:11. Note that
no care is made WRT to checking endpoint type and
gadget's speed. That's left for drivers to handle.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Introduces a new FunctionFS descriptor flag named
FUNCTIONFS_CONFIG0_SETUP.
When this flag is enabled, FunctionFS userspace drivers can process
non-standard control requests in configuration 0.
Signed-off-by: Felix Hädicke <felixhaedicke@web.de>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Introduces a new FunctionFS descriptor flag named
FUNCTIONFS_ALL_CTRL_RECIP. When this flag is enabled, control requests,
which are not explicitly directed to an interface or endpoint, can be
handled.
This allows FunctionFS userspace drivers to process non-standard
control requests.
Signed-off-by: Felix Hädicke <felixhaedicke@web.de>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
This takes the definitions of requests from chapter 9.3.1
of the USB Power Delivery spec.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding the descriptors of chapter 9.2 of the Power Delivery spec.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A host is required to use the GetStatus command, with wIndex set to the
OTG status selector(F000H) to request the Host request flag from the
peripheral.
Acked-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
The SuperspeedPlus Device Capability Descriptor has a variable size
depending on the number of sublink speed attributes.
This patch adds a macro to calculate that size. The macro takes one
argument, the Sublink Speed Attribute Count (SSAC) as reported by the
descriptor in bmAttributes[4:0].
See USB 3.1 9.6.2.5, Table 9-19.
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
USB 3.1 devices that support precision time measurement have an
additional PTM cabaility descriptor as part of the full BOS descriptor
Look for this descriptor while parsing the BOS descriptor, and store it in
struct usb_hub_bos if it exists.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB3.1 specifies a SuperSpeedPlus Isoc endpoint companion descriptor
which is returned as part of the devices complete configuration
descriptor.
It contains number of bytes per service interval which is needed when
reserving bus time in the schedule for transfers over 48K bytes per
service interval.
If bmAttributes bit 7 is set in the old SuperSpeed Endpoint Companion
descriptor, it will be ollowed by the new SuperSpeedPlus Isoc Endpoint
Companion descriptor.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These ioctls provide support for the USBTMC-USB488 control requests
for REN_CONTROL, GO_TO_LOCAL and LOCAL_LOCKOUT
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a convenience function to obtain an instrument's
capabilities from its file descriptor without having to access sysfs
from the user program.
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Background:
When performing a read on an instrument that is executing a function
that runs longer than the USB timeout the instrument may hang and
require a device reset to recover. The READ_STATUS_BYTE operation
always returns even when the instrument is busy permitting to poll
for the appropriate condition. This capability is referred to in
instrument application notes on synchronizing acquisitions for other
platforms.
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb 3.1 extend the hub get-port-status request by adding different
request types. the new request types return 4 additional bytes called
extended port status, these bytes are returned after the regular
portstatus and portchange values.
The extended port status contains a speed ID for the currently used
sublink speed. A table of supported Speed IDs with details about the link
is provided by the hub in the device descriptor BOS SuperSpeedPlus
device capability Sublink Speed Attributes.
Support this new request. Ask for the extended port status after port
reset if hub supports USB 3.1. If link is running at SuperSpeedPlus
set the device speed to USB_SPEED_SUPER_PLUS
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a new USB_SPEED_SUPER_PLUS device speed, and make sure usb core can
handle the new speed.
In most cases the behaviour is the same as with USB_SPEED_SUPER SuperSpeed
devices. In a few places we add a "Plus" string to inform the user of the
new speed.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
UVC 1.5 devices report a bInterfaceProtocol value set to 1 in their
interface descriptors. The uvcvideo driver only matches on
bInterfaceProtocol 0, preventing those devices from being detected.
More changes to the driver are needed for full UVC 1.5 compatibility.
However, at least the UVC 1.5 Microsoft Surface Pro 3 cameras have been
reported to work out of the box with the driver with an updated match
table.
Enable UVC 1.5 support in the match table to support the devices that
can work with the current driver implementation. Devices that can't will
fail, but that's hardly a regression as they're currently not detected
at all anyway.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Pull USB updates from Greg KH:
"Here is the big USB patchset for 4.4-rc1.
As usual, most of the changes are in the gadget subsystem, and we
removed a host controller for a device that is no longer in existance,
and probably never was even made public. There is also other minor
driver updates and new device ids, full details in the changelog.
All of these have been in linux-next for a while"
* tag 'usb-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (233 commits)
USB: core: Codestyle fix in urb.c
usb: misc: usb3503: Use i2c_add_driver helper macro
usb: host: lpc32xx: don't unregister phy device
usb: host: lpc32xx: balance clk enable/disable on removal
usb: host: lpc32xx: fix warnings caused by enabling unprepared clock
uwb: drp: Use setup_timer
uwb: neh: Use setup_timer
uwb: rsv: Use setup_timer
USB: qcserial: add Sierra Wireless MC74xx/EM74xx
usb: chipidea: otg: don't wait vbus drops below BSV when starts host
chipidea: ci_hdrc_pci: use PCI_VDEVICE() instead of PCI_DEVICE()
doc: dt-binding: ci-hdrc-usb2: split vendor specific properties
usb: chipidea: imx: add imx6ul usb support
doc: dt-binding: ci-hdrc-usb2: improve property description
usb: chipidea: imx: add usb support for imx7d
Doc: usb: ci-hdrc-usb2: Add phy-clkgate-delay-us entry
usb: chipidea: Add support for 'phy-clkgate-delay-us' property
usb: chipidea: Use extcon framework for VBUS and ID detect
usb: gadget: net2280: restore ep_cfg after defect7374 workaround
usb: dwc2: host: Fix use after free w/ simultaneous irqs
...
USB 3.1 SuperSpeedPlus device capability descriptor is returned as part
of the bos descriptor for devices that support SuperSpeedPlus protocol.
The descriptor contains more detailed information about the supported
speeds of the device. More details about the descriptor can be found in
the USB 3.1 specification section 9.6.2.5
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OTG 2.0 introduces bcdOTG in otg descriptor to identify the OTG and EH
supplement release number with which the OTG device is compliant, this
patch adds structure usb_otg20_descriptor for OTG 2.0 and above.
Signed-off-by: Macpaul Lin <macpaul@gmail.com>
Signed-off-by: Li Jun <jun.li@freescale.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Add eventfd which notifies userspace about ep0 events and AIO completion
events. It simplifies using of FunctionFS with event loop, because now
we need to poll on single file (instead of polling on ep0 and eventfd's
supplied to AIO layer).
FunctionFS eventfd is not triggered if another eventfd is supplied to
AIO layer (in AIO request). It can be useful, for example, when we want
to handle AIO transations for chosen endpoint in separate thread.
Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
This patch introduces virtual endpoint address mapping. It separates
function logic form physical endpoint addresses making it more hardware
independent.
Following modifications changes user space API, so to enable them user
have to switch on the FUNCTIONFS_VIRTUAL_ADDR flag in descriptors.
Endpoints are now refered using virtual endpoint addresses chosen by
user in endpoint descpriptors. This applies to each context when endpoint
address can be used:
- when accessing endpoint files in FunctionFS filesystemi (in file name),
- in setup requests directed to specific endpoint (in wIndex field),
- in descriptors returned by FUNCTIONFS_ENDPOINT_DESC ioctl.
In endpoint file names the endpoint address number is formatted as
double-digit hexadecimal value ("ep%02x") which has few advantages -
it is easy to parse, allows to easly recognize endpoint direction basing
on its name (IN endpoint number starts with digit 8, and OUT with 0)
which can be useful for debugging purpose, and it makes easier to introduce
further features allowing to use each endpoint number in both directions
to have more endpoints available for function if hardware supports this
(for example we could have ep01 which is endpoint 1 with OUT direction,
and ep81 which is endpoint 1 with IN direction).
Physical endpoint address can be still obtained using ioctl named
FUNCTIONFS_ENDPOINT_REVMAP, but now it's not neccesary to handle
USB transactions properly.
Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
This patch introduces ioctl named FUNCTIONFS_ENDPOINT_DESC, which
returns endpoint descriptor to userspace. It works only if function
is active.
Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Since commit [ac8dde11: “Add flags to descriptors block”] functionfs
supports a new, more powerful and extensible, descriptor format.
Since ffs-test is probably the first thing users of the functionfs
interface see when they start writing functionfs user space daemons,
convert it to use the new format thus promoting it.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
The structure can be used with user space tools that use the new
functionfs description format, for example as follows:
static const struct {
struct usb_functionfs_descs_head_v2 header;
__le32 fs_count;
__le32 hs_count;
struct {
…
} fs_desc;
struct {
…
} hs_desc;
} descriptors = {
.header = {
.magic = cpu_to_le32(FUNCTIONFS_DESCRIPTORS_MAGIC_V2),
.length = cpu_to_le32(sizeof(descriptors)),
.flags = cpu_to_le32(FUNCTIONFS_HAS_FS_DESC |
FUNCTIONFS_HAS_HS_DESC)
},
.fs_count = cpu_to_le32(X),
.fs_desc = {
…
},
.hs_count = cpu_to_le32(Y),
.hs_desc = {
…
}
};
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Felipe writes:
usb: patches for v3.17 merge window
Surprisingly enough, while a big set of patches, the majority is
composed of cleanups (using devm_*, fixing sparse errors, moving
code around, adding const, etc).
The highlights are addition of new support for PLX USB338x devices,
and support for USB 2.0-only configurations of the DWC3 IP core.
Signed-of-by: Felipe Balbi <balbi@ti.com>
Add support for OS descriptors. The new format of descriptors is used,
because the "flags" field is required for extensions. os_count gives
the number of OSDesc[] elements.
The format of descriptors is given in include/uapi/linux/usb/functionfs.h.
For extended properties descriptor the usb_ext_prop_desc structure covers
only a part of a descriptor, because the wPropertyNameLength is unknown
up front.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Even though usb_functionfs_descs_head structure is now deprecated,
it has been used by some user space tools. Its removel in commit
[ac8dde1: “Add flags to descriptors block”] was an oversight
leading to build breakage for such tools.
Bring it back so that old user space tools can still be build
without problems on newer kernel versions.
Cc: <stable@vger.kernel.org> # 3.14
Reported-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Reported-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Commit [ac8dde11: “usb: gadget: f_fs: Add flags to descriptors block”]
which introduced a new descriptor format for FunctionFS removed the
usb_functionfs_descs_head structure, which is still used by ffs-test.
tool.
Convert ffs-test by converting it to use the new header format. For
testing kernels prior to 3.14 (when the new format was introduced) and
parsing of the legacy headers in the new kernels, provide a compilation
flag to make the tool use the old format.
Finally, include information as to when the legacy FunctionFS headers
format has been deprecated (which is also when the new one has been
introduced).
Reported-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
