b6ed3d42aa
"LE.UM.3.2.3-43600-SA2150p" * tag 'LE.UM.3.2.3-43600-SA2150p' of https://source.codeaurora.org/quic/la/kernel/msm-4.14: ARM: dts: msm: Modify gfx_iommus iommus-cells size for qcs405 ARM: dts: msm: Add dts file for kdump kernel on sa8155 defconfig: Add defconfig for kdump capture kernel on gen3_auto usb: gadget: f_mdm_data: Do not queue OUT requests if MDM is disconnected msm: pil: bootkpi: Add conditional boot marker for modem defconfig: Initial common perf defconfig for sa8155 and sa8195 defconfig: sa8155: Enable CONFIG_KEXEC ANDROID: Incremental fs: Remove dependency on PKCS7_MESSAGE_PARSER ANDROID: Incremental fs: Cache successful hash calculations ANDROID: Incremental fs: Fix four error-path bugs Revert "ANDROID: Incremental fs: Avoid continually recalculating hashes" ANDROID: Incremental fs: wake up log pollers less often ANDROID: Incremental fs: Fix scheduling while atomic error ANDROID: Incremental fs: Avoid continually recalculating hashes ANDROID: Incremental fs: Fix issues with very large files ANDROID: Incremental fs: Add setattr call ANDROID: Incremental fs: Use simple compression in log buffer ANDROID: Incremental fs: Fix create_file performance ANDROID: Incremental fs: Fix compound page usercopy crash ANDROID: Incremental fs: make remount log buffer change atomic ANDROID: Incremental fs: Optimize get_filled_block ANDROID: Incremental fs: Fix mislabeled __user ptrs ANDROID: Incremental fs: Use 64-bit int for file_size when writing hash blocks Revert "ANDROID: Incremental fs: Fix initialization, use of bitfields" ANDROID: Incremental fs: Fix remount ANDROID: Incremental fs: Protect get_fill_block, and add a field ANDROID: Incremental fs: Fix crash polling 0 size read_log ANDROID: Incremental fs: get_filled_blocks: better index_out ANDROID: Incremental fs: Fix four resource bugs ANDROID: Incremental fs: Add INCFS_IOC_GET_FILLED_BLOCKS ANDROID: Incremental fs: Fix two typos ANDROID: Incremental fs: Add INCFS_IOC_PERMIT_FILL ANDROID: Incremental fs: Remove signature checks from kernel ANDROID: Incremental fs: Pad hash blocks ANDROID: Incremental fs: Make fill block an ioctl ANDROID: Incremental fs: Remove all access_ok checks ANDROID: Incremental fs: Support xattrs ANDROID: Incremental fs: Fix initialization, use of bitfields ANDROID: Incremental fs: Fix crash on failed lookup ANDROID: Incremental fs: Make files writeable ANDROID: Incremental fs: Remove C++-style comments power: smb1398-charger: disable sync between master and slave power: smb1398-charger: Update the OVP threshold to 14V power: smb1398: Update default cp-min-icl to 1A for HVDCP3 power: battery: Add support to enable PPS to work in CV mode ARM: dts: qcom: Add HS-I2S device tree support on SA8195-GVM spi: spi-geni-qcom: Avoid return before mutex unlock drivers: soc: sdx_ext_ipc: Fix dev_err drivers: soc: sdx_ext_ipc: Fix probe failure serial: msm_geni_serial: Fix DMA TX FSM reset sequence Bluetooth: Add the support for wcn3980 in SDM429w ARM: dts: msm: Add bluetooth node for 2wcn support for SDM429w ARM: dts: msm: Disable can-controller node for SA8195 ADP AIR board defconfig: Add WCNSS related config parameter rpmsg: qcom_glink_bgcom: Correct the remote intent ack sequence msm: ipa3: Update the channel mode before start channel ARM: dts: add audio device tree for sdm429 soc: qcom: hab: add the buffer size sanity check for exporting a buffer ARM: dts: msm: revert qcs410 include from dt file regulator: qcom_pm8008: Fix regulator_get_voltage API Revert "bootkpi: Add KPI Marker for System Resume" ARM: dts: msm: Increase CMA region to 40 MB on sm6150 ARM: dts: msm: Reduce AQC ring size with PCIe switch on sdxprairie ARM: dts: msm: Remove unused AQC devicetree node in sdxprairie msm: sps: Correct descriptor fifo address to dump contents defconfig: msm: Enable required limits driver for sdm429-bg ARM: dts: sa2145p: add support for NAND SOM dts: sdx: add support for tdm for sa515m card ARM: dts: msm: update modem Tj thermal zone trips for SA515 net: stmmac: Fixed autoneg disable issue ARM: dts: msm: Enable ro.boot.avb_version for sdm429 cfg80211: Add support for HE msm: ipa: send the endp_desc QMI for low_lat only on non-auto mode msm: ais: ife SOF and buffer done tracking arm :dts : Modified the rgmii size ARM: dts: msm: enable AVB 2.0 in linux guest defconfig: support for hid-nintendo driver ARM: dts: msm: sdhci: disable hotplug in broken change detect arm-smmu: add bitmap for secure context banks iommu/arm-smmu: override writel_relaxed in smmu global address space char: virtio_fastrpc: use DMA_ATTR_SKIP_CPU_SYNC for uncached buffer mhi: core: Prevent extra votes for multiple timesync requests msm:npu: prevent fmax_pwrlvl to be used uninitialized ARM: dts: msm: Add new property npu-dsp-sid-mapped for npu msm: npu: Allow user code to query if NPUDSP SID is mapped net: stmmac: Add check for HWTSTAMP_FILTER_ALL filter Revert "msm: pcie: add parallelization support for pcie msm probe" ARM: dts: msm: Fix wrong include file in sa8195 adp-air overlay msm: vidc: fix dec out buf count update logic for batching mode ARM: dts: sa2145p: enable side band wake up support serial:msm_geni_serial: CANCEL bit changes for 4.14 based target ARM: dts: msm: Add common device tree for SA8195 ADP defconfig: arm64: msm: Enable CONFIG_IOMMU_IO_PGTABLE_FAST in QCS405 ARM: dts: msm: Enable PCIe0 for S8155 Single LV GVM FROMLIST: HID: nintendo: add nintendo switch controller driver f2fs: remove blk_plugging in block_operations usb: gadget: f_gsi: Increase num of buffers to 50 for ECM msm: v4l2loopback: Implement V4L2 cropping functionality defconfig: sa2150p: enable graphics driver ARM: dts: sa2150p: Enable device nodes for graphics support usb: gadget: f_ipc: Add support of sideband notifier call chain ARM: dts: msm: disable qti-can on SA8155 ADP AIR board spi: spi-geni-qcom: Restrict SPI responder to transfer mode 1 msm: mhi_dev: Wait for host to set BHI_INTVEC value defconfig: sdm429w: Add new defconfig to enable new PA msm: mhi_dev: Skip mhi channel state info change defconfig: sa2150p: enable helper APIs for sideband notifications wcnss: Register wlan driver ops for SMD notification spi: spi_qsd: Add Shared EE property check for spi documentation: bindings: spi_qsd: Add shared ee dtsi flag msm-geni-serial: Correct the interrupt polling logic in uart rpmsg: glink: Changing interrupt trigger option arm64: config: Enable Glink for GVM ARM: dts: msm: Add skip-disable-before-sw-enable flag to gx_gdsc clk: qcom: gdsc-regulator: Update support to skip GDSC disable ARM: dts: msm: change display-label to display-type for DSI0 ARM: dts: qcom: add video device tree support for sdm429w ARM64: dts: msm: Add wakeup support for sdx-ext-ipc devices drivers: soc: sdx_ext_ipc: Add wakeup support from system suspend ARM: dts: msm: change HAB VMID to 3 for single LV GVM msm: ipahal: Add uCP exception case for status pkt genetlink: remove genl_bind net: stmmac: Set DOMAIN_ATTR_GEOMETRY for smmu fastmap usb: gadget: f_midi: Avoid invalid pointer access ipa3: Support wdi3 over gsi on msmnile APQ target msm: kgsl: Put a keep alive vote before updating CP_RB_WPTR rpmsg: qcom_glink_bgcom: Correct the copyright licence msm: ep_pcie: Add KPI marker and log for PCIe link init msm: mhi_dev: Add KPI marker and log for mhi init arm64/kdump: Build fix for CONFIG_KEXEC serial: msm_geni_serial: Initialize the variables before access mailbox: Add new mailbox for gvm hwspinlock: Add support to parse spin lock id clk: qcom: mdss: update dsi 12nm clock driver mm/swapfile.c: move inode_lock out of claim_swapfile ARM: dts: qcom: update display dts nodes for sdm429w WTP soc: qcom: dcc_v2: Add NULL check before using dcc driver data mm/memblock.c: fix bug in early_dyn_memhotplug ARM: dts: sa2150p: enable BLSP0 UART and free up GPIO 83 ARM: dts: sa2150p: add support for NAND based SOM ARM: dts: sa2145p: add support for NAND based SOM defconfig: sa515m: enable helper APIs for sideband notifications soc: qcom: sideband: add helper APIs for sideband notifications clk: qcom: smd_rpm: Change rpm clk_id for SDM429 defconfig: sdm429: Add MPROC GLINK defconfig for SDM429W defconfig: Initial common defconfig for sa8155 and sa8195 ARM: dts: sa2145p: add msm-id for sa2145p chip ARM: dts: sa2150p: remove incorrect msm-id inclusion ARM: dts: msm: Update mpss_adsp carved memory for sa515m platform ARM: msm: dts: enable touch node for wearable ARM: dts: qcom: vm: Add device nodes for second AFE rx and proxy tx devices ARM: dts: msm: Disable BAM mode for spi dtsi node ARM: dts: msm: Add glink bgcom dtsi node for sdm429 rpmsg: Add glink-bgcom driver for rpmsg framework tmc-etr: Add ETR status check in usb_notifier defconfig: sdm429: add display configs spi: spi-geni-qcom: Don't initialize GSI channels for FIFO/SE_DMA mode ARM: dts: Add NFC device node for SDM429W clk: qcom: smd_rpm: Add bb_clk_pin for SDM429 ARM: msm: dts: Enable restarting usb host mode in HS for SDM660 USB: pd: Restart host mode in high speed if no usb3 & dp concurrency qcom/watchdog_v2: Disable watchdog before booting crash kernel ARM: dts: Enable HMP for SA8195, SA8155 and SA6155 VM msm: sps: Assign proper BAM destination values ARM: dts: msm: Add SPM control for sdm429w clk: qcom: cpu-sdm: Add spm control support defconfig: sdm: Add support for CPU clocks ARM: dts: msm: Add CPU clock support for sdm429w clk: qcom: cpu-sdm: Add cpu clock driver for SDM ARM: dts: msm: add gpr and gecko drivers to DT ARM: dts: msm: add display related dt nodes on QCS410 device msm: ais: acquire init_frame_drop from userspace defconfig: Enable qcom_sps_dma driver for sdm429w i2c-msm-v2: Make init call as module_init for i2c driver usb: host: xhci-plat: Fix IMOD configuration from sysfs ARM: dts: msm: Add GPU support for sdm429w ARM: dts: msm: Add to distinguish NO or NC connection in USB Type-C msm: ipa: Fix updating the doobell for WDI3 bindings: qpnp-smb5: add property to show fake charging status ARM: dts: msm: Add wcnss node for sdm429 defconfig: sa2150p: Enable SDX_EXT_IPC msm: kgsl: Add A504 GPU support for SDM429 defconfig: sa2150p-nand: Enable SDX_EXT_IPC ARM: dts: msm: Remove the extra double quotes in the model name clk: qcom: gdsc-regulator: Add support to skip GDSC disable clk: qcom: Add enable_safe_config for gfx3d_clk_src ARM: dts: msm: Add bg spi and bg daemon nodes coresight-tmc-etr: Add QDSS IPA bam connection support ARM: dts: msm: Add blackghost pil node ARM: dts: msm: Define adsp loader node defconfig: sdm429: Add pil configs to sdm429 ARM: dts: msm: add device tree for EAP connection through ethernet power: qpnp-smb5: add property to show fake charging status power: smb5-lib: Show unknown battery status for debug battery arm: dts: msm: Add dt entry to enable geometry mapping in stmmac ARM: dts: msm: Add multiport USB controller and PHYs on sdmshrike usb: dwc3: Write necessary registers for dual port enablement usb: dwc3-msm: Add support for 2nd set of wakeup IRQs usb: dwc3: Add support for 4 PHYs for dual port controller qseecom: register qseecom client with msm bus driver msm: ais: remove cci reset for specified master during cci initialization ARM: dts: msm: Align with the gpio name change in driver drivers: soc: sdx_ext_ipc: Give generic name for gpios drivers: soc: sdx_ext_ipc: Make gpio DT entries optional i2c: i2c-qcom-geni: Enhance IPC logging debug infra in I2C ASoC: tfa98xx: Update profile info properly ASoC: tfa98xx: Fix type casting error ASoC: tfa98xx: Add tfa98xx smart PA driver msm: sps: Use iomem attribute for base address msm: mhi_dev: Do not flush events to host if channel is stopped ARM: dts: msm: add tzlog device node for sdm429 fs: namespace: Fix use-after-free in unmount msm: ais: fix cci read return value issue ARM : dts : support realtek r8125 ethernet driver msm: ethernet : smmu: enable qcom smmu dma-mapping-fast: Fix erroneous MAIR idx calculation sdm429w: modify copy right year as per guidelines pinctrl: qcom: Clear status bit on irq_unmask Revert "Revert "ANDROID: security,perf: Allow further restriction of perf_event_open"" defconfig: enable cpufreq stats config drivers: soc: qcom: Add bg pil driver to 4.14 clk: qcom: rcg2: Fix possible null pointer dereference usb: misc: Add support for diag bridging over mdm_data_bridge ARM: dts: msm: Add pil nodes to sdm429 msm: kernel: add bgcom interface header file ARM: dts: msm: Add trace source coresight nodes for sdmshrike ARM: dts: msm: Enable CTIs and TPDMs for sdmshrike msm: kernel: add bgcom interface header file ARM: dts: msm: Fix crypto tests ARM: dts: msm: Add support for various subtype of IDP board for QCM/S6125 ARM: msm: Hardware name correction for SDM429W ARM: dts: msm: enable smmu for sdm429 ARM: dts: msm: Disable the secure mem region for SDM429 drivers: thermal: Force notify thermal to re-evaluate TSENS sensors msm: set config for ADSPRPC and add dtsi node spi: spi-geni-qcom: Check for zero length transfer spi: spi-geni-qcom: Reset the dma engine on failure cpufreq: stats: Change return type of cpufreq_stats_update() as void cpufreq: stats: Handle the case when trans_table goes beyond PAGE_SIZE drivers: thermal: Re-initialize TSENS controller interrupt configuration Early Services: init: fs: synchronize Early Services with init soc: qcom: dcc_v2: Add PM callbacks to support hibernation atlantic forwarding driver v1.1.7 ARM: dts: msm: Add support for DT overlay QCS410 platform: msm: qcom-geni-se: Enable SSC QUP SE clks before SCM call dfc: fix null pointer access dfc: add stall recovery timer regulator: qpnp-lcdb: Disable step voltage ramp for PM8150L V3 drm:msm:sde fix compile error when RSC is not enabled msm: mhi_dev: Increase size of ipa_clnt_hndl array sched: core_ctl: Fix possible uninitialized variable msm: mhi_dev: Disable IPA DMA during MHI cleanup ARM: dts: msm: Remove camera pil memory defconfig: sdm429w: Enable BGCOM drivers wcnss: validate build version response correctly msm: ais: fix 6155 crop issue on mini IFE driver msm: ipa: Support hardware accelerated DIAG over qdss msm: kgsl: Do not double free pages in kgsl_memdesc defconfig: sa2150p: remove IEEE 802.11 support defconfig: sa2150p: remove bluetooth driver not required wcnss: Export SMD channel close API for wlan driver removal wcnss: Export wcnss smd tx method defconfig: sa2150p-nand: Add 3D Graphics driver msm: camera: Update CSIPHY/CSID v3.5 registers mhi: netdev: free memory allocated in read/write ARM: dts: msm: Add audio support ARM: dts: msm: Add qseecom node for sdm429 qseecom: use legacy command for bgapp sched: Improve the scheduler dt-bindings: drm: msm: update detach handoff option for shp dt-bindings: drm: msm: shd: add dynamic mode support dt-bindings: drm: msm-lease: add empty resource support arm: dts: msm: Add dt entry to enable geometry mapping in EMAC ARM: dts: msm: Add 1.8v override for SA515M telematics CDP staging: android: ion: Add support for Carveout allocations in ion_alloc soc: qcom: Add bgcom driver for sdm429w ARM: dts: msm: Remove the pil-force-shutdown flag msm: ipa3: Fix to map the npn phy address only once msm: mhi_dev: update NHWER after M0 from host profiler: Add a communication interface between userspace and tz services defconfig: msm: Add PCIe driver for sdxprarie ARM: dts: msm: Add PCIe switch driver for sdxprairie pci: switch: Add PCIe switch driver msm: camera: isp: Flush Pending list after stop HW to avoid race clk: qcom: Add debug clk support for SDM660 msm: ipa3: Send actual DL flt rule to Q6 cnss2: Add synchronized force wake support ARM: dts: msm: Add debugcc support for SDM660 defconfig: sdm429: Add CONFIG_MSM_TZ_SMMU defconfig for sdm429 power: smb2: Enable read/writing of Type-C Rp value iommu/arm-smmu: Add MSM_TZ_SMMU support on SDM429W ARM: msm: dts: Set usb dvdd voltage range to [0.8v 0.8v] for sdm429 clk: qcom: sdm429w: Update the gcc/debugcc for sdm429w rpmsg: qcom_smd: Add SET signal support ARM: dts: qcom: Correct adsp_smsm node interrupt number ARM: dts: msm: correct the filenames in Makefile usb: gadget: f_ipc: Fix race between ipc_free_inst and ipc_close ARM: DTS: msm: Update DP PLL string for SDM660 usb: gadget: f_qdss: Allocate one string ID for all instances dma-buf: fix race while reading the dma_buf in dmabuffs_dname usb: gadget: Reset string ids upon unbind USB: f_mtp: Revert Avoid queuing of receive_file_work for 0 length ARM: dts: msm: Add QDSS IPA bam connection config for sdxprairie mhi: core: Use high priority workqueue for all MHI work net: stmmac: dwmac4_prog_mtl_tx_algorithms() missing write operation net: stmmac: Disable flow ctrl for RX AVB queues and enable TX AVB queues net: stmmac: copyright year fix defconfig: msm: Disable CONFIG_BUILD_ARM64_APPENDED_DTB_IMAGE flag ARM: dts: msm: Add pseudo port entries ARM: dts: msm: remove qdss offset for trinket ARM: dts: msm: Add WLAN pin control support on sdm429w msm: ipa: Move the QMI for mhi pipe info to modem bootup ARM: dts: msm: Remove GPU min, low and svs levels for 8195 diag: Add debug logs tracing diag mhi read and write paths ARM: dts: msm: Add MPROC glink related node for gvm soc: qcom: smem: Support to parse smem host id msm: npu: refactor wait_for_status_ready to reduce the latency arm64: dts: qcs405: Add src clk strings ARM: dts: msm: Add pcie1 support for sa8155 virtual machine clk: qcom: Add pcie1 virtio clocks for sa8155 net: stmmac: copy from user fail handle msm: ipa3: increase pkt ctx for cv2x rsrc grp rpmsg: smd: Use spinlock in tx path Signed-off-by: UtsavBalar1231 <utsavbalar1231@gmail.com>
97 lines
3.0 KiB
Plaintext
97 lines
3.0 KiB
Plaintext
menu "Rpmsg drivers"
|
|
|
|
# RPMSG always gets selected by whoever wants it
|
|
config RPMSG
|
|
tristate
|
|
|
|
config RPMSG_CHAR
|
|
tristate "RPMSG device interface"
|
|
depends on RPMSG
|
|
depends on NET
|
|
help
|
|
Say Y here to export rpmsg endpoints as device files, usually found
|
|
in /dev. They make it possible for user-space programs to send and
|
|
receive rpmsg packets.
|
|
|
|
config RPMSG_QCOM_GLINK_NATIVE
|
|
tristate
|
|
select RPMSG
|
|
|
|
config RPMSG_QCOM_GLINK_RPM
|
|
tristate "Qualcomm RPM Glink driver"
|
|
select RPMSG_QCOM_GLINK_NATIVE
|
|
depends on HAS_IOMEM
|
|
depends on MAILBOX
|
|
help
|
|
Say y here to enable support for the GLINK RPM communication driver,
|
|
which serves as a channel for communication with the RPM in GLINK
|
|
enabled systems.
|
|
|
|
config RPMSG_QCOM_GLINK_SMEM
|
|
tristate "Qualcomm SMEM Glink driver"
|
|
select RPMSG_QCOM_GLINK_NATIVE
|
|
depends on MAILBOX
|
|
depends on QCOM_SMEM
|
|
help
|
|
Say y here to enable support for the GLINK SMEM communication driver,
|
|
which provides support for using the GLINK communication protocol
|
|
over SMEM.
|
|
|
|
config RPMSG_QCOM_GLINK_SPSS
|
|
tristate "Qualcomm SPSS Glink driver"
|
|
select RPMSG_QCOM_GLINK_NATIVE
|
|
depends on MAILBOX
|
|
depends on QCOM_SMEM
|
|
select QSEE_IPC_IRQ
|
|
help
|
|
Say y here to enable support for the GLINK SPSS communication driver,
|
|
which provides support for using the GLINK communication protocol
|
|
over SMEM. This protocol maps the smem and then shares the mapped
|
|
region with the remote proc by writing the smem descriptor location
|
|
and size into shared registers.
|
|
|
|
config RPMSG_QCOM_GLINK_SPI
|
|
tristate "Qualcomm SPI Glink driver"
|
|
help
|
|
Say y here to enable support for the GLINK SPI communication driver,
|
|
which provides support for using the GLINK communication protocol
|
|
over SPI. This transport performs marshaling of GLINK commands and
|
|
data to the appropriate SPI bus wire format and allows for GLINK
|
|
communication with remote subsystems that are external to the SoC.
|
|
|
|
config RPMSG_QCOM_GLINK_BGCOM
|
|
tristate "Qualcomm Technologies, Inc. BGCOM Glink driver"
|
|
help
|
|
Say y here to enable support for the GLINK BGCOM driver,
|
|
which provides support for using the GLINK communication protocol
|
|
over BGCOM. This transport performs marshaling of GLINK commands and
|
|
data to the appropriate BGCOM format and allows for GLINK
|
|
communication with remote subsystems that are external to the SoC.
|
|
|
|
config RPMSG_QCOM_SMD
|
|
tristate "Qualcomm Shared Memory Driver (SMD)"
|
|
depends on QCOM_SMEM
|
|
select RPMSG
|
|
help
|
|
Say y here to enable support for the Qualcomm Shared Memory Driver
|
|
providing communication channels to remote processors in Qualcomm
|
|
platforms.
|
|
|
|
config RPMSG_VIRTIO
|
|
tristate "Virtio RPMSG bus driver"
|
|
depends on HAS_DMA
|
|
select RPMSG
|
|
select VIRTIO
|
|
|
|
config MSM_RPM_SMD
|
|
bool "RPM driver using SMD protocol"
|
|
select RPMSG
|
|
help
|
|
RPM is the dedicated hardware engine for managing shared SoC
|
|
resources. This config adds driver support for using SMD as a
|
|
transport layer communication with RPM hardware. It also selects
|
|
the MSM_MPM config that programs the MPM module to monitor interrupts
|
|
during sleep modes.
|
|
|
|
endmenu
|