* refs/heads/tmp-816f245:
Revert "clk: qcom: rcg2: Don't crash if our parent can't be found; return an error"
Reverting crypto patches
Reverting incremental fs changes
Linux 4.14.180
cgroup, netclassid: remove double cond_resched
mac80211: add ieee80211_is_any_nullfunc()
ALSA: hda: Match both PCI ID and SSID for driver blacklist
tracing: Reverse the order of trace_types_lock and event_mutex
sctp: Fix SHUTDOWN CTSN Ack in the peer restart case
net: systemport: suppress warnings on failed Rx SKB allocations
net: bcmgenet: suppress warnings on failed Rx SKB allocations
lib/mpi: Fix building for powerpc with clang
net: dsa: b53: Rework ARL bin logic
scripts/config: allow colons in option strings for sed
s390/ftrace: fix potential crashes when switching tracers
cifs: protect updating server->dstaddr with a spinlock
net: stmmac: Fix sub-second increment
net: stmmac: fix enabling socfpga's ptp_ref_clock
wimax/i2400m: Fix potential urb refcnt leak
ASoC: codecs: hdac_hdmi: Fix incorrect use of list_for_each_entry
ASoC: rsnd: Fix HDMI channel mapping for multi-SSI mode
ASoC: sgtl5000: Fix VAG power-on handling
selftests/ipc: Fix test failure seen after initial test run
ASoC: topology: Check return value of pcm_new_ver
powerpc/pci/of: Parse unassigned resources
vhost: vsock: kick send_pkt worker once device is started
ANDROID: arm64: fix a mismerge in proc.S
Linux 4.14.179
selinux: properly handle multiple messages in selinux_netlink_send()
dmaengine: dmatest: Fix iteration non-stop logic
nfs: Fix potential posix_acl refcnt leak in nfs3_set_acl
ALSA: opti9xx: shut up gcc-10 range warning
iommu/amd: Fix legacy interrupt remapping for x2APIC-enabled system
scsi: target/iblock: fix WRITE SAME zeroing
iommu/qcom: Fix local_base status check
vfio/type1: Fix VA->PA translation for PFNMAP VMAs in vaddr_get_pfn()
vfio: avoid possible overflow in vfio_iommu_type1_pin_pages
RDMA/mlx4: Initialize ib_spec on the stack
RDMA/mlx5: Set GRH fields in query QP on RoCE
dm verity fec: fix hash block number in verity_fec_decode
PM: hibernate: Freeze kernel threads in software_resume()
PM: ACPI: Output correct message on target power state
ALSA: pcm: oss: Place the plugin buffer overflow checks correctly
ALSA: hda/hdmi: fix without unlocked before return
ALSA: hda/realtek - Two front mics on a Lenovo ThinkCenter
mmc: sdhci-pci: Fix eMMC driver strength for BYT-based controllers
mmc: sdhci-xenon: fix annoying 1.8V regulator warning
btrfs: fix partial loss of prealloc extent past i_size after fsync
btrfs: fix block group leak when removing fails
drm/qxl: qxl_release use after free
drm/qxl: qxl_release leak in qxl_hw_surface_alloc()
drm/qxl: qxl_release leak in qxl_draw_dirty_fb()
drm/edid: Fix off-by-one in DispID DTD pixel clock
ext4: fix special inode number checks in __ext4_iget()
ANDROID: Incremental fs: Fix issues with very large files
Linux 4.14.178
propagate_one(): mnt_set_mountpoint() needs mount_lock
ext4: check for non-zero journal inum in ext4_calculate_overhead
qed: Fix use after free in qed_chain_free
ext4: unsigned int compared against zero
ext4: fix block validity checks for journal inodes using indirect blocks
ext4: don't perform block validity checks on the journal inode
ext4: protect journal inode's blocks using block_validity
ext4: avoid declaring fs inconsistent due to invalid file handles
hwmon: (jc42) Fix name to have no illegal characters
ext4: convert BUG_ON's to WARN_ON's in mballoc.c
ext4: increase wait time needed before reuse of deleted inode numbers
ext4: use matching invalidatepage in ext4_writepage
arm64: Delete the space separator in __emit_inst
xen/xenbus: ensure xenbus_map_ring_valloc() returns proper grant status
objtool: Support Clang non-section symbols in ORC dump
objtool: Fix CONFIG_UBSAN_TRAP unreachable warnings
scsi: target: fix PR IN / READ FULL STATUS for FC
xfs: fix partially uninitialized structure in xfs_reflink_remap_extent
x86: hyperv: report value of misc_features
bpf, x86: Fix encoding for lower 8-bit registers in BPF_STX BPF_B
mm: shmem: disable interrupt when acquiring info->lock in userfaultfd_copy path
perf/core: fix parent pid/tid in task exit events
ARM: dts: bcm283x: Disable dsi0 node
net/cxgb4: Check the return from t4_query_params properly
i2c: altera: use proper variable to hold errno
nfsd: memory corruption in nfsd4_lock()
iio:ad7797: Use correct attribute_group
usb: gadget: udc: bdc: Remove unnecessary NULL checks in bdc_req_complete
usb: dwc3: gadget: Do link recovery for SS and SSP
binder: take read mode of mmap_sem in binder_alloc_free_page()
include/uapi/linux/swab.h: fix userspace breakage, use __BITS_PER_LONG for swap
mtd: cfi: fix deadloop in cfi_cmdset_0002.c do_write_buffer
remoteproc: Fix wrong rvring index computation
xfs: Fix deadlock between AGI and AGF with RENAME_WHITEOUT
xfs: validate sb_logsunit is a multiple of the fs blocksize
serial: sh-sci: Make sure status register SCxSR is read in correct sequence
usb: f_fs: Clear OS Extended descriptor counts to zero in ffs_data_reset()
UAS: fix deadlock in error handling and PM flushing work
UAS: no use logging any details in case of ENODEV
cdc-acm: introduce a cool down
cdc-acm: close race betrween suspend() and acm_softint
staging: vt6656: Power save stop wake_up_count wrap around.
staging: vt6656: Fix pairwise key entry save.
staging: vt6656: Fix drivers TBTT timing counter.
staging: vt6656: Fix calling conditions of vnt_set_bss_mode
staging: vt6656: Don't set RCR_MULTICAST or RCR_BROADCAST by default.
vt: don't hardcode the mem allocation upper bound
staging: comedi: Fix comedi_device refcnt leak in comedi_open
staging: comedi: dt2815: fix writing hi byte of analog output
powerpc/setup_64: Set cache-line-size based on cache-block-size
ARM: imx: provide v7_cpu_resume() only on ARM_CPU_SUSPEND=y
iwlwifi: pcie: actually release queue memory in TVQM
ASoC: dapm: fixup dapm kcontrol widget
audit: check the length of userspace generated audit records
usb-storage: Add unusual_devs entry for JMicron JMS566
tty: rocket, avoid OOB access
tty: hvc: fix buffer overflow during hvc_alloc().
KVM: VMX: Enable machine check support for 32bit targets
KVM: Check validity of resolved slot when searching memslots
tpm: ibmvtpm: retry on H_CLOSED in tpm_ibmvtpm_send()
tpm/tpm_tis: Free IRQ if probing fails
ALSA: usb-audio: Filter out unsupported sample rates on Focusrite devices
ALSA: usb-audio: Fix usb audio refcnt leak when getting spdif
ALSA: hda/realtek - Add new codec supported for ALC245
ALSA: usx2y: Fix potential NULL dereference
tools/vm: fix cross-compile build
mm/ksm: fix NULL pointer dereference when KSM zero page is enabled
mm/hugetlb: fix a addressing exception caused by huge_pte_offset
vmalloc: fix remap_vmalloc_range() bounds checks
overflow.h: Add arithmetic shift helper
USB: hub: Fix handling of connect changes during sleep
USB: core: Fix free-while-in-use bug in the USB S-Glibrary
USB: early: Handle AMD's spec-compliant identifiers, too
USB: Add USB_QUIRK_DELAY_CTRL_MSG and USB_QUIRK_DELAY_INIT for Corsair K70 RGB RAPIDFIRE
USB: sisusbvga: Change port variable from signed to unsigned
fs/namespace.c: fix mountpoint reference counter race
iio: xilinx-xadc: Fix sequencer configuration for aux channels in simultaneous mode
iio: xilinx-xadc: Fix clearing interrupt when enabling trigger
iio: xilinx-xadc: Fix ADC-B powerdown
iio: adc: stm32-adc: fix sleep in atomic context
ALSA: hda: Remove ASUS ROG Zenith from the blacklist
KEYS: Avoid false positive ENOMEM error on key read
vrf: Check skb for XFRM_TRANSFORMED flag
xfrm: Always set XFRM_TRANSFORMED in xfrm{4,6}_output_finish
net: dsa: b53: Fix ARL register definitions
team: fix hang in team_mode_get()
tcp: cache line align MAX_TCP_HEADER
net/x25: Fix x25_neigh refcnt leak when receiving frame
net: netrom: Fix potential nr_neigh refcnt leak in nr_add_node
net: bcmgenet: correct per TX/RX ring statistics
macvlan: fix null dereference in macvlan_device_event()
macsec: avoid to set wrong mtu
ipv6: fix restrict IPV6_ADDRFORM operation
cxgb4: fix large delays in PTP synchronization
mm, slub: restore the original intention of prefetch_freepointer()
PCI/ASPM: Allow re-enabling Clock PM
perf/core: Disable page faults when getting phys address
pwm: bcm2835: Dynamically allocate base
pwm: renesas-tpu: Fix late Runtime PM enablement
s390/cio: avoid duplicated 'ADD' uevents
ipc/util.c: sysvipc_find_ipc() should increase position index
selftests: kmod: fix handling test numbers above 9
kernel/gcov/fs.c: gcov_seq_next() should increase position index
ASoC: Intel: atom: Take the drv->lock mutex before calling sst_send_slot_map()
scsi: iscsi: Report unbind session event when the target has been removed
pwm: rcar: Fix late Runtime PM enablement
ceph: don't skip updating wanted caps when cap is stale
ceph: return ceph_mdsc_do_request() errors from __get_parent()
scsi: lpfc: Fix kasan slab-out-of-bounds error in lpfc_unreg_login
watchdog: reset last_hw_keepalive time at start
vti4: removed duplicate log message.
crypto: mxs-dcp - make symbols 'sha1_null_hash' and 'sha256_null_hash' static
drm/msm: Use the correct dma_sync calls harder
keys: Fix the use of the C++ keyword "private" in uapi/linux/keyctl.h
net: ipv4: avoid unused variable warning for sysctl
net: ipv4: emulate READ_ONCE() on ->hdrincl bit-field in raw_sendmsg()
ext4: fix extent_status fragmentation for plain files
FROMGIT: f2fs: fix missing check for f2fs_unlock_op
ANDROID: Fix kernel build regressions from virtio-gpu-next patches
ANDROID: Incremental fs: Add setattr call
ANDROID: cuttlefish_defconfig: enable LTO and CFI
ANDROID: x86: map CFI jump tables in pti_clone_entry_text
ANDROID: crypto: aesni: fix function types for aesni_(enc|dec)
ANDROID: x86: disable CFI for do_syscall_*
ANDROID: BACKPORT: x86, module: Ignore __typeid__ relocations
ANDROID: BACKPORT: x86, relocs: Ignore __typeid__ relocations
ANDROID: BACKPORT: x86/extable: Do not mark exception callback as CFI
FROMLIST: crypto, x86/sha: Eliminate casts on asm implementations
UPSTREAM: crypto: x86 - Rename functions to avoid conflict with crypto/sha256.h
BACKPORT: x86/vmlinux: Actually use _etext for the end of the text segment
ANDROID: x86: disable STACK_VALIDATION with LTO_CLANG
ANDROID: x86: add support for CONFIG_LTO_CLANG
ANDROID: x86/vdso: disable LTO only for VDSO
ANDROID: x86/cpu/vmware: use the full form of inl in VMWARE_PORT
UPSTREAM: x86/build/lto: Fix truncated .bss with -fdata-sections
ANDROID: kbuild: don't select LD_DEAD_CODE_DATA_ELIMINATION with LTO
ANDROID: kbuild: export LTO and CFI flags
ANDROID: cfi: remove unnecessary <asm/memory.h> include
ANDROID: drm/virtio: rebase to latest virgl/drm-misc-next (take 2)
UPSTREAM: sysrq: Use panic() to force a crash
ANDROID: Incremental fs: Use simple compression in log buffer
ANDROID: dm-bow: Fix not to skip trim at framented range
ANDROID: Remove VLA from uid_sys_stats.c
ANDROID: cuttlefish_defconfig: enable CONFIG_DEBUG_LIST
Linux 4.14.177
KEYS: Don't write out to userspace while holding key semaphore
KEYS: Use individual pages in big_key for crypto buffers
mtd: phram: fix a double free issue in error path
mtd: lpddr: Fix a double free in probe()
locktorture: Print ratio of acquisitions, not failures
tty: evh_bytechan: Fix out of bounds accesses
fbdev: potential information leak in do_fb_ioctl()
net: dsa: bcm_sf2: Fix overflow checks
iommu/amd: Fix the configuration of GCR3 table root pointer
libnvdimm: Out of bounds read in __nd_ioctl()
ext2: fix debug reference to ext2_xattr_cache
ext2: fix empty body warnings when -Wextra is used
iommu/vt-d: Fix mm reference leak
NFS: Fix memory leaks in nfs_pageio_stop_mirroring()
drm/amdkfd: kfree the wrong pointer
x86: ACPI: fix CPU hotplug deadlock
KVM: s390: vsie: Fix possible race when shadowing region 3 tables
compiler.h: fix error in BUILD_BUG_ON() reporting
percpu_counter: fix a data race at vm_committed_as
include/linux/swapops.h: correct guards for non_swap_entry()
ext4: do not commit super on read-only bdev
powerpc/maple: Fix declaration made after definition
s390/cpuinfo: fix wrong output when CPU0 is offline
NFS: direct.c: Fix memory leak of dreq when nfs_get_lock_context fails
NFSv4/pnfs: Return valid stateids in nfs_layout_find_inode_by_stateid()
rtc: 88pm860x: fix possible race condition
soc: imx: gpc: fix power up sequencing
clk: tegra: Fix Tegra PMC clock out parents
power: supply: bq27xxx_battery: Silence deferred-probe error
clk: at91: usb: continue if clk_hw_round_rate() return zero
of: unittest: kmemleak in of_unittest_platform_populate()
rbd: call rbd_dev_unprobe() after unwatching and flushing notifies
rbd: avoid a deadlock on header_rwsem when flushing notifies
of: fix missing kobject init for !SYSFS && OF_DYNAMIC config
soc: qcom: smem: Use le32_to_cpu for comparison
wil6210: abort properly in cfg suspend
wil6210: fix length check in __wmi_send
wil6210: add block size checks during FW load
wil6210: fix PCIe bus mastering in case of interface down
rpmsg: glink: smem: Ensure ordering during tx
rpmsg: glink: Fix missing mutex_init() in qcom_glink_alloc_channel()
rtc: pm8xxx: Fix issue in RTC write path
rpmsg: glink: use put_device() if device_register fail
wil6210: rate limit wil_rx_refill error
scsi: ufs: ufs-qcom: remove broken hci version quirk
scsi: ufs: make sure all interrupts are processed
wil6210: fix temperature debugfs
wil6210: increase firmware ready timeout
arch_topology: Fix section miss match warning due to free_raw_capacity()
arm64: traps: Don't print stack or raw PC/LR values in backtraces
arm64: perf: remove unsupported events for Cortex-A73
Revert "gpio: set up initial state from .get_direction()"
clk: Fix debugfs_create_*() usage
drm: NULL pointer dereference [null-pointer-deref] (CWE 476) problem
video: fbdev: sis: Remove unnecessary parentheses and commented code
lib/raid6: use vdupq_n_u8 to avoid endianness warnings
ALSA: hda: Don't release card at firmware loading error
irqchip/mbigen: Free msi_desc on device teardown
netfilter: nf_tables: report EOPNOTSUPP on unsupported flags/object type
arm, bpf: Fix bugs with ALU64 {RSH, ARSH} BPF_K shift by 0
ext4: use non-movable memory for superblock readahead
scsi: sg: add sg_remove_request in sg_common_write
objtool: Fix switch table detection in .text.unlikely
mm/vmalloc.c: move 'area->pages' after if statement
x86/resctrl: Fix invalid attempt at removing the default resource group
x86/resctrl: Preserve CDP enable over CPU hotplug
x86/intel_rdt: Enable L2 CDP in MSR IA32_L2_QOS_CFG
x86/intel_rdt: Add two new resources for L2 Code and Data Prioritization (CDP)
x86/intel_rdt: Enumerate L2 Code and Data Prioritization (CDP) feature
x86/microcode/AMD: Increase microcode PATCH_MAX_SIZE
scsi: target: fix hang when multiple threads try to destroy the same iscsi session
scsi: target: remove boilerplate code
kvm: x86: Host feature SSBD doesn't imply guest feature SPEC_CTRL_SSBD
dm flakey: check for null arg_name in parse_features()
ext4: do not zeroout extents beyond i_disksize
mac80211_hwsim: Use kstrndup() in place of kasprintf()
btrfs: check commit root generation in should_ignore_root
tracing: Fix the race between registering 'snapshot' event trigger and triggering 'snapshot' operation
ALSA: usb-audio: Don't override ignore_ctl_error value from the map
ASoC: Intel: mrfld: return error codes when an error occurs
ASoC: Intel: mrfld: fix incorrect check on p->sink
ext4: fix incorrect inodes per group in error message
ext4: fix incorrect group count in ext4_fill_super error message
pwm: pca9685: Fix PWM/GPIO inter-operation
jbd2: improve comments about freeing data buffers whose page mapping is NULL
scsi: ufs: Fix ufshcd_hold() caused scheduling while atomic
net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes
net: revert default NAPI poll timeout to 2 jiffies
net: qrtr: send msgs from local of same id as broadcast
net: ipv6: do not consider routes via gateways for anycast address check
net: ipv4: devinet: Fix crash when add/del multicast IP with autojoin
hsr: check protocol version in hsr_newlink()
amd-xgbe: Use __napi_schedule() in BH context
mfd: dln2: Fix sanity checking for endpoints
misc: echo: Remove unnecessary parentheses and simplify check for zero
powerpc/fsl_booke: Avoid creating duplicate tlb1 entry
ipmi: fix hung processes in __get_guid()
ftrace/kprobe: Show the maxactive number on kprobe_events
drm: Remove PageReserved manipulation from drm_pci_alloc
drm/dp_mst: Fix clearing payload state on topology disable
crypto: caam - update xts sector size for large input length
dm zoned: remove duplicate nr_rnd_zones increase in dmz_init_zone()
btrfs: use nofs allocations for running delayed items
Btrfs: fix crash during unmount due to race with delayed inode workers
powerpc: Make setjmp/longjmp signature standard
powerpc: Add attributes for setjmp/longjmp
scsi: mpt3sas: Fix kernel panic observed on soft HBA unplug
powerpc/kprobes: Ignore traps that happened in real mode
powerpc/xive: Use XIVE_BAD_IRQ instead of zero to catch non configured IPIs
powerpc/hash64/devmap: Use H_PAGE_THP_HUGE when setting up huge devmap PTE entries
powerpc/64/tm: Don't let userspace set regs->trap via sigreturn
powerpc/powernv/idle: Restore AMR/UAMOR/AMOR after idle
libata: Return correct status in sata_pmp_eh_recover_pm() when ATA_DFLAG_DETACH is set
hfsplus: fix crash and filesystem corruption when deleting files
cpufreq: powernv: Fix use-after-free
kmod: make request_module() return an error when autoloading is disabled
Input: i8042 - add Acer Aspire 5738z to nomux list
s390/diag: fix display of diagnose call statistics
perf tools: Support Python 3.8+ in Makefile
ocfs2: no need try to truncate file beyond i_size
fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once()
ext4: fix a data race at inode->i_blocks
NFS: Fix a page leak in nfs_destroy_unlinked_subrequests()
rtc: omap: Use define directive for PIN_CONFIG_ACTIVE_HIGH
arm64: armv8_deprecated: Fix undef_hook mask for thumb setend
scsi: zfcp: fix missing erp_lock in port recovery trigger for point-to-point
dm verity fec: fix memory leak in verity_fec_dtr
mm: Use fixed constant in page_frag_alloc instead of size + 1
tools: gpio: Fix out-of-tree build regression
x86/speculation: Remove redundant arch_smt_update() invocation
powerpc/pseries: Drop pointless static qualifier in vpa_debugfs_init()
net: rtnl_configure_link: fix dev flags changes arg to __dev_notify_flags
ALSA: hda: Initialize power_state field properly
crypto: mxs-dcp - fix scatterlist linearization for hash
btrfs: drop block from cache on error in relocation
CIFS: Fix bug which the return value by asynchronous read is error
KVM: VMX: fix crash cleanup when KVM wasn't used
KVM: VMX: Always VMCLEAR in-use VMCSes during crash with kexec support
KVM: x86: Allocate new rmap and large page tracking when moving memslot
KVM: s390: vsie: Fix delivery of addressing exceptions
KVM: s390: vsie: Fix region 1 ASCE sanity shadow address checks
KVM: nVMX: Properly handle userspace interrupt window request
x86/entry/32: Add missing ASM_CLAC to general_protection entry
signal: Extend exec_id to 64bits
ath9k: Handle txpower changes even when TPC is disabled
MIPS: OCTEON: irq: Fix potential NULL pointer dereference
irqchip/versatile-fpga: Apply clear-mask earlier
KEYS: reaching the keys quotas correctly
PCI: endpoint: Fix for concurrent memory allocation in OB address region
PCI/ASPM: Clear the correct bits when enabling L1 substates
nvme-fc: Revert "add module to ops template to allow module references"
thermal: devfreq_cooling: inline all stubs for CONFIG_DEVFREQ_THERMAL=n
acpi/x86: ignore unspecified bit positions in the ACPI global lock field
media: ti-vpe: cal: fix disable_irqs to only the intended target
ALSA: hda/realtek - Set principled PC Beep configuration for ALC256
ALSA: doc: Document PC Beep Hidden Register on Realtek ALC256
ALSA: pcm: oss: Fix regression by buffer overflow fix
ALSA: ice1724: Fix invalid access for enumerated ctl items
ALSA: hda: Fix potential access overflow in beep helper
ALSA: hda: Add driver blacklist
ALSA: usb-audio: Add mixer workaround for TRX40 and co
usb: gadget: composite: Inform controller driver of self-powered
usb: gadget: f_fs: Fix use after free issue as part of queue failure
ASoC: topology: use name_prefix for new kcontrol
ASoC: dpcm: allow start or stop during pause for backend
ASoC: dapm: connect virtual mux with default value
ASoC: fix regwmask
slub: improve bit diffusion for freelist ptr obfuscation
misc: rtsx: set correct pcr_ops for rts522A
uapi: rename ext2_swab() to swab() and share globally in swab.h
btrfs: track reloc roots based on their commit root bytenr
btrfs: remove a BUG_ON() from merge_reloc_roots()
block, bfq: fix use-after-free in bfq_idle_slice_timer_body
locking/lockdep: Avoid recursion in lockdep_count_{for,back}ward_deps()
irqchip/gic-v4: Provide irq_retrigger to avoid circular locking dependency
usb: dwc3: core: add support for disabling SS instances in park mode
block: Fix use-after-free issue accessing struct io_cq
genirq/irqdomain: Check pointer in irq_domain_alloc_irqs_hierarchy()
efi/x86: Ignore the memory attributes table on i386
x86/boot: Use unsigned comparison for addresses
gfs2: Don't demote a glock until its revokes are written
libata: Remove extra scsi_host_put() in ata_scsi_add_hosts()
PCI/switchtec: Fix init_completion race condition with poll_wait()
selftests/x86/ptrace_syscall_32: Fix no-vDSO segfault
sched: Avoid scale real weight down to zero
irqchip/versatile-fpga: Handle chained IRQs properly
block: keep bdi->io_pages in sync with max_sectors_kb for stacked devices
x86: Don't let pgprot_modify() change the page encryption bit
null_blk: fix spurious IO errors after failed past-wp access
null_blk: Handle null_add_dev() failures properly
null_blk: Fix the null_add_dev() error path
i2c: st: fix missing struct parameter description
qlcnic: Fix bad kzalloc null test
cxgb4/ptp: pass the sign of offset delta in FW CMD
hinic: fix wrong para of wait_for_completion_timeout
hinic: fix a bug of waitting for IO stopped
net: vxge: fix wrong __VA_ARGS__ usage
bus: sunxi-rsb: Return correct data when mixing 16-bit and 8-bit reads
ANDROID: fix wakeup reason findings
UPSTREAM: gpu/trace: add a gpu total memory usage tracepoint
CHROMIUM: drm/virtio: rebase zero-copy patches to virgl/drm-misc-next
CHROMIUM: virtio-gpu: add VIRTIO_GPU_F_RESOURCE_UUID feature
CHROMIUM: drm/virtgpu: add legacy VIRTIO_GPU_* values for non-upstream variants
CHROMIUM: drm/virtgpu: fix various warnings
CHROMIUM: drm/virtgpu: implement metadata allocation ioctl
CHROMIUM: drm/virtgpu: introduce request IDRs
CHROMIUM: drm/virtgpu: implement DRM_VIRTGPU_RESOURCE_CREATE_V2
CHROMIUM: drm/virtgpu: add stub ioctl implementation
CHROMIUM: drm/virtgpu: check for revelant capabilites
CHROMIUM: drm/virtgpu: add memory type to virtio_gpu_object_params
CHROMIUM: drm/virtgpu: make memory and resource creation opaque
CHROMIUM: virtio-gpu api: VIRTIO_GPU_F_MEMORY
CHROMIUM: virtwl: store plane info per virtio_gpu_object
CHROMIUM: drm/virtgpu: expose new ioctls to userspace
BACKPORT: drm/virtio: move virtio_gpu_object_{attach, detach} calls.
ANDROID: drm: ttm: Add ttm_tt_create2 driver hook
UPSTREAM: virtio-gpu api: comment feature flags
UPSTREAM: drm/virtio: module_param_named() requires linux/moduleparam.h
BACKPORT: drm/virtio: fix resource id creation race
BACKPORT: drm/virtio: make resource id workaround runtime switchable.
BACKPORT: drm/virtio: do NOT reuse resource ids
BACKPORT: drm/virtio: Drop deprecated load/unload initialization
f2fs: fix quota_sync failure due to f2fs_lock_op
f2fs: support read iostat
f2fs: Fix the accounting of dcc->undiscard_blks
f2fs: fix to handle error path of f2fs_ra_meta_pages()
f2fs: report the discard cmd errors properly
f2fs: fix long latency due to discard during umount
f2fs: add tracepoint for f2fs iostat
f2fs: introduce sysfs/data_io_flag to attach REQ_META/FUA
UPSTREAM: kheaders: include only headers into kheaders_data.tar.xz
UPSTREAM: kheaders: remove meaningless -R option of 'ls'
ANDROID: Incremental fs: Fix create_file performance
ANDROID: Incremental fs: Fix compound page usercopy crash
ANDROID: Incremental fs: Clean up incfs_test build process
ANDROID: Incremental fs: make remount log buffer change atomic
ANDROID: Incremental fs: Optimize get_filled_block
ANDROID: Incremental fs: Fix mislabeled __user ptrs
ANDROID: Incremental fs: Use 64-bit int for file_size when writing hash blocks
Revert "ANDROID: Incremental fs: Fix initialization, use of bitfields"
Linux 4.14.176
drm/msm: Use the correct dma_sync calls in msm_gem
rpmsg: glink: smem: Support rx peak for size less than 4 bytes
drm_dp_mst_topology: fix broken drm_dp_sideband_parse_remote_dpcd_read()
usb: dwc3: don't set gadget->is_otg flag
rpmsg: glink: Remove chunk size word align warning
arm64: Fix size of __early_cpu_boot_status
drm/msm: stop abusing dma_map/unmap for cache
clk: qcom: rcg: Return failure for RCG update
acpi/nfit: Fix bus command validation
fbcon: fix null-ptr-deref in fbcon_switch
RDMA/cm: Update num_paths in cma_resolve_iboe_route error flow
Bluetooth: RFCOMM: fix ODEBUG bug in rfcomm_dev_ioctl
ceph: canonicalize server path in place
ceph: remove the extra slashes in the server path
IB/hfi1: Fix memory leaks in sysfs registration and unregistration
IB/hfi1: Call kobject_put() when kobject_init_and_add() fails
ASoC: jz4740-i2s: Fix divider written at incorrect offset in register
hwrng: imx-rngc - fix an error path
tools/accounting/getdelays.c: fix netlink attribute length
random: always use batched entropy for get_random_u{32,64}
mlxsw: spectrum_flower: Do not stop at FLOW_ACTION_VLAN_MANGLE
slcan: Don't transmit uninitialized stack data in padding
net: stmmac: dwmac1000: fix out-of-bounds mac address reg setting
net: phy: micrel: kszphy_resume(): add delay after genphy_resume() before accessing PHY registers
net: dsa: bcm_sf2: Ensure correct sub-node is parsed
ipv6: don't auto-add link-local address to lag ports
mm: mempolicy: require at least one nodeid for MPOL_PREFERRED
padata: always acquire cpu_hotplug_lock before pinst->lock
coresight: do not use the BIT() macro in the UAPI header
misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices
blk-mq: Allow blocking queue tag iter callbacks
blk-mq: sync the update nr_hw_queues with blk_mq_queue_tag_busy_iter
drm/etnaviv: replace MMU flush marker with flush sequence
tools/power turbostat: Fix gcc build warnings
initramfs: restore default compression behavior
drm/bochs: downgrade pci_request_region failure from error to warning
sctp: fix possibly using a bad saddr with a given dst
sctp: fix refcount bug in sctp_wfree
net, ip_tunnel: fix interface lookup with no key
ipv4: fix a RCU-list lock in fib_triestat_seq_show
ANDROID: power: wakeup_reason: wake reason enhancements
ubifs: wire up FS_IOC_GET_ENCRYPTION_NONCE
f2fs: wire up FS_IOC_GET_ENCRYPTION_NONCE
ext4: wire up FS_IOC_GET_ENCRYPTION_NONCE
fscrypt: add FS_IOC_GET_ENCRYPTION_NONCE ioctl
FROMLIST: power_supply: Add additional health properties to the header
UPSTREAM: power: supply: core: Update sysfs-class-power ABI document
BACKPORT: FROMGIT: kbuild: mkcompile_h: Include $LD version in /proc/version
ANDROID: fscrypt: fall back to filesystem-layer crypto when needed
ANDROID: block: require drivers to declare supported crypto key type(s)
ANDROID: block: make blk_crypto_start_using_mode() properly check for support
f2fs: keep inline_data when compression conversion
f2fs: fix to disable compression on directory
f2fs: add missing CONFIG_F2FS_FS_COMPRESSION
f2fs: switch discard_policy.timeout to bool type
f2fs: fix to verify tpage before releasing in f2fs_free_dic()
f2fs: show compression in statx
f2fs: clean up dic->tpages assignment
f2fs: compress: support zstd compress algorithm
f2fs: compress: add .{init,destroy}_decompress_ctx callback
f2fs: compress: fix to call missing destroy_compress_ctx()
f2fs: change default compression algorithm
f2fs: clean up {cic,dic}.ref handling
f2fs: fix to use f2fs_readpage_limit() in f2fs_read_multi_pages()
f2fs: xattr.h: Make stub helpers inline
f2fs: fix to avoid double unlock
f2fs: fix potential .flags overflow on 32bit architecture
f2fs: fix NULL pointer dereference in f2fs_verity_work()
f2fs: fix to clear PG_error if fsverity failed
f2fs: don't call fscrypt_get_encryption_info() explicitly in f2fs_tmpfile()
f2fs: don't trigger data flush in foreground operation
f2fs: fix NULL pointer dereference in f2fs_write_begin()
f2fs: clean up f2fs_may_encrypt()
f2fs: fix to avoid potential deadlock
f2fs: don't change inode status under page lock
f2fs: fix potential deadlock on compressed quota file
f2fs: delete DIO read lock
f2fs: don't mark compressed inode dirty during f2fs_iget()
f2fs: fix to account compressed blocks in f2fs_compressed_blocks()
f2fs: xattr.h: Replace zero-length array with flexible-array member
f2fs: fix to update f2fs_super_block fields under sb_lock
f2fs: Add a new CP flag to help fsck fix resize SPO issues
f2fs: Fix mount failure due to SPO after a successful online resize FS
f2fs: use kmem_cache pool during inline xattr lookups
f2fs: skip migration only when BG_GC is called
f2fs: fix to show tracepoint correctly
f2fs: avoid __GFP_NOFAIL in f2fs_bio_alloc
f2fs: introduce F2FS_IOC_GET_COMPRESS_BLOCKS
f2fs: fix to avoid triggering IO in write path
f2fs: add prefix for f2fs slab cache name
f2fs: introduce DEFAULT_IO_TIMEOUT
f2fs: skip GC when section is full
f2fs: add migration count iff migration happens
f2fs: clean up bggc mount option
f2fs: clean up lfs/adaptive mount option
f2fs: fix to show norecovery mount option
f2fs: clean up parameter of macro XATTR_SIZE()
f2fs: clean up codes with {f2fs_,}data_blkaddr()
f2fs: show mounted time
f2fs: Use scnprintf() for avoiding potential buffer overflow
f2fs: allow to clear F2FS_COMPR_FL flag
f2fs: fix to check dirty pages during compressed inode conversion
f2fs: fix to account compressed inode correctly
f2fs: fix wrong check on F2FS_IOC_FSSETXATTR
f2fs: fix to avoid use-after-free in f2fs_write_multi_pages()
f2fs: fix to avoid using uninitialized variable
f2fs: fix inconsistent comments
f2fs: remove i_sem lock coverage in f2fs_setxattr()
f2fs: cover last_disk_size update with spinlock
f2fs: fix to check i_compr_blocks correctly
FROMLIST: kmod: make request_module() return an error when autoloading is disabled
UPSTREAM: loop: Only freeze block queue when needed.
UPSTREAM: loop: Only change blocksize when needed.
ANDROID: Incremental fs: Fix remount
ANDROID: Incremental fs: Protect get_fill_block, and add a field
ANDROID: Incremental fs: Fix crash polling 0 size read_log
ANDROID: Incremental fs: get_filled_blocks: better index_out
ANDROID: Fix wq fp check for CFI builds
ANDROID: Incremental fs: Fix four resource bugs
ANDROID: kbuild: ensure __cfi_check is correctly aligned
ANDROID: kbuild: fix module linker script flags for LTO
Linux 4.14.175
arm64: dts: ls1046ardb: set RGMII interfaces to RGMII_ID mode
arm64: dts: ls1043a-rdb: correct RGMII delay mode to rgmii-id
ARM: bcm2835-rpi-zero-w: Add missing pinctrl name
ARM: dts: oxnas: Fix clear-mask property
perf map: Fix off by one in strncpy() size argument
arm64: alternative: fix build with clang integrated assembler
net: ks8851-ml: Fix IO operations, again
gpiolib: acpi: Add quirk to ignore EC wakeups on HP x2 10 CHT + AXP288 model
bpf: Explicitly memset some bpf info structures declared on the stack
bpf: Explicitly memset the bpf_attr structure
platform/x86: pmc_atom: Add Lex 2I385SW to critclk_systems DMI table
vt: vt_ioctl: fix use-after-free in vt_in_use()
vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console
vt: vt_ioctl: remove unnecessary console allocation checks
vt: switch vt_dont_switch to bool
vt: ioctl, switch VT_IS_IN_USE and VT_BUSY to inlines
vt: selection, introduce vc_is_sel
mac80211: fix authentication with iwlwifi/mvm
mac80211: Check port authorization in the ieee80211_tx_dequeue() case
media: xirlink_cit: add missing descriptor sanity checks
media: stv06xx: add missing descriptor sanity checks
media: dib0700: fix rc endpoint lookup
media: ov519: add missing endpoint sanity checks
libfs: fix infoleak in simple_attr_read()
staging: wlan-ng: fix use-after-free Read in hfa384x_usbin_callback
staging: wlan-ng: fix ODEBUG bug in prism2sta_disconnect_usb
staging: rtl8188eu: Add ASUS USB-N10 Nano B1 to device table
media: usbtv: fix control-message timeouts
media: flexcop-usb: fix endpoint sanity check
usb: musb: fix crash with highmen PIO and usbmon
USB: serial: io_edgeport: fix slab-out-of-bounds read in edge_interrupt_callback
USB: cdc-acm: restore capability check order
USB: serial: option: add Wistron Neweb D19Q1
USB: serial: option: add BroadMobi BM806U
USB: serial: option: add support for ASKEY WWHC050
afs: Fix some tracing details
Input: raydium_i2c_ts - fix error codes in raydium_i2c_boot_trigger()
Input: raydium_i2c_ts - use true and false for boolean values
vti6: Fix memory leak of skb if input policy check fails
netfilter: nft_fwd_netdev: validate family and chain type
xfrm: policy: Fix doulbe free in xfrm_policy_timer
xfrm: add the missing verify_sec_ctx_len check in xfrm_add_acquire
xfrm: fix uctx len check in verify_sec_ctx_len
RDMA/mlx5: Block delay drop to unprivileged users
vti[6]: fix packet tx through bpf_redirect() in XinY cases
xfrm: handle NETDEV_UNREGISTER for xfrm device
genirq: Fix reference leaks on irq affinity notifiers
RDMA/core: Ensure security pkey modify is not lost
gpiolib: acpi: Add quirk to ignore EC wakeups on HP x2 10 BYT + AXP288 model
gpiolib: acpi: Rework honor_wakeup option into an ignore_wake option
gpiolib: acpi: Correct comment for HP x2 10 honor_wakeup quirk
mac80211: mark station unauthorized before key removal
scsi: sd: Fix optimal I/O size for devices that change reported values
scripts/dtc: Remove redundant YYLOC global declaration
tools: Let O= makes handle a relative path with -C option
perf probe: Do not depend on dwfl_module_addrsym()
ARM: dts: omap5: Add bus_dma_limit for L3 bus
ARM: dts: dra7: Add bus_dma_limit for L3 bus
Input: avoid BIT() macro usage in the serio.h UAPI header
Input: synaptics - enable RMI on HP Envy 13-ad105ng
i2c: hix5hd2: add missed clk_disable_unprepare in remove
ftrace/x86: Anotate text_mutex split between ftrace_arch_code_modify_post_process() and ftrace_arch_code_modify_prepare()
arm64: compat: map SPSR_ELx<->PSR for signals
arm64: ptrace: map SPSR_ELx<->PSR for compat tasks
sxgbe: Fix off by one in samsung driver strncpy size arg
dpaa_eth: Remove unnecessary boolean expression in dpaa_get_headroom
mac80211: Do not send mesh HWMP PREQ if HWMP is disabled
scsi: ipr: Fix softlockup when rescanning devices in petitboot
fsl/fman: detect FMan erratum A050385
arm64: dts: ls1043a: FMan erratum A050385
dt-bindings: net: FMan erratum A050385
cgroup1: don't call release_agent when it is ""
drivers/of/of_mdio.c:fix of_mdiobus_register()
cpupower: avoid multiple definition with gcc -fno-common
cgroup-v1: cgroup_pidlist_next should update position index
net: ipv4: don't let PMTU updates increase route MTU
hsr: set .netnsok flag
hsr: add restart routine into hsr_get_node_list()
hsr: use rcu_read_lock() in hsr_get_node_{list/status}()
vxlan: check return value of gro_cells_init()
net: dsa: mt7530: Change the LINK bit to reflect the link status
bnxt_en: fix memory leaks in bnxt_dcbnl_ieee_getets()
slcan: not call free_netdev before rtnl_unlock in slcan_open
NFC: fdp: Fix a signedness bug in fdp_nci_send_patch()
net: stmmac: dwmac-rk: fix error path in rk_gmac_probe
net_sched: keep alloc_hash updated after hash allocation
net_sched: cls_route: remove the right filter from hashtable
net: qmi_wwan: add support for ASKEY WWHC050
net/packet: tpacket_rcv: avoid a producer race condition
net: mvneta: Fix the case where the last poll did not process all rx
net: dsa: Fix duplicate frames flooded by learning
macsec: restrict to ethernet devices
hsr: fix general protection fault in hsr_addr_is_self()
Revert "drm/dp_mst: Skip validating ports during destruction, just ref"
staging: greybus: loopback_test: fix potential path truncations
staging: greybus: loopback_test: fix potential path truncation
drm/bridge: dw-hdmi: fix AVI frame colorimetry
arm64: smp: fix crash_smp_send_stop() behaviour
arm64: smp: fix smp_send_stop() behaviour
ALSA: hda/realtek: Fix pop noise on ALC225
Revert "ipv6: Fix handling of LLA with VRF and sockets bound to VRF"
Revert "vrf: mark skb for multicast or link-local as enslaved to VRF"
futex: Unbreak futex hashing
futex: Fix inode life-time issue
kbuild: Disable -Wpointer-to-enum-cast
iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode
iio: adc: at91-sama5d2_adc: fix channel configuration for differential channels
USB: cdc-acm: fix rounding error in TIOCSSERIAL
USB: cdc-acm: fix close_delay and closing_wait units in TIOCSSERIAL
x86/mm: split vmalloc_sync_all()
page-flags: fix a crash at SetPageError(THP_SWAP)
mm, slub: prevent kmalloc_node crashes and memory leaks
mm: slub: be more careful about the double cmpxchg of freelist
memcg: fix NULL pointer dereference in __mem_cgroup_usage_unregister_event
xhci: Do not open code __print_symbolic() in xhci trace events
rtc: max8907: add missing select REGMAP_IRQ
intel_th: pci: Add Elkhart Lake CPU support
intel_th: Fix user-visible error codes
staging/speakup: fix get_word non-space look-ahead
staging: rtl8188eu: Add device id for MERCUSYS MW150US v2
mmc: sdhci-of-at91: fix cd-gpios for SAMA5D2
iio: magnetometer: ak8974: Fix negative raw values in sysfs
iio: trigger: stm32-timer: disable master mode when stopping
ALSA: pcm: oss: Remove WARNING from snd_pcm_plug_alloc() checks
ALSA: pcm: oss: Avoid plugin buffer overflow
ALSA: seq: oss: Fix running status after receiving sysex
ALSA: seq: virmidi: Fix running status after receiving sysex
ALSA: line6: Fix endless MIDI read loop
usb: xhci: apply XHCI_SUSPEND_DELAY to AMD XHCI controller 1022:145c
USB: serial: pl2303: add device-id for HP LD381
usb: host: xhci-plat: add a shutdown
USB: serial: option: add ME910G1 ECM composition 0x110b
usb: quirks: add NO_LPM quirk for RTL8153 based ethernet adapters
USB: Disable LPM on WD19's Realtek Hub
parse-maintainers: Mark as executable
block, bfq: fix overwrite of bfq_group pointer in bfq_find_set_group()
xenbus: req->err should be updated before req->state
xenbus: req->body should be updated before req->state
dm bio record: save/restore bi_end_io and bi_integrity
altera-stapl: altera_get_note: prevent write beyond end of 'key'
drivers/perf: arm_pmu_acpi: Fix incorrect checking of gicc pointer
drm/exynos: dsi: fix workaround for the legacy clock name
drm/exynos: dsi: propagate error value and silence meaningless warning
spi/zynqmp: remove entry that causes a cs glitch
spi: pxa2xx: Add CS control clock quirk
ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes
powerpc: Include .BTF section
spi: qup: call spi_qup_pm_resume_runtime before suspending
UPSTREAM: ubifs: wire up FS_IOC_GET_ENCRYPTION_NONCE
UPSTREAM: f2fs: wire up FS_IOC_GET_ENCRYPTION_NONCE
UPSTREAM: ext4: wire up FS_IOC_GET_ENCRYPTION_NONCE
UPSTREAM: fscrypt: add FS_IOC_GET_ENCRYPTION_NONCE ioctl
UPSTREAM: usb: raw_gadget: fix compilation warnings in uapi headers
BACKPORT: usb: gadget: add raw-gadget interface
UPSTREAM: usb: gadget: move choice ... endchoice to legacy/Kconfig
ANDROID: clang: update to 10.0.5
FROMLIST: arm64: define __alloc_zeroed_user_highpage
ANDROID: Incremental fs: Add INCFS_IOC_GET_FILLED_BLOCKS
ANDROID: Incremental fs: Fix two typos
f2fs: fix to avoid potential deadlock
f2fs: add missing function name in kernel message
f2fs: recycle unused compress_data.chksum feild
f2fs: fix to avoid NULL pointer dereference
f2fs: fix leaking uninitialized memory in compressed clusters
f2fs: fix the panic in do_checkpoint()
f2fs: fix to wait all node page writeback
mm/swapfile.c: move inode_lock out of claim_swapfile
UPSTREAM: ipv6: ndisc: add support for 'PREF64' dns64 prefix identifier
UPSTREAM: ipv6: ndisc: add support for 'PREF64' dns64 prefix identifier
ANDROID: dm-bow: Fix free_show value is incorrect
UPSTREAM: coresight: Potential uninitialized variable in probe()
ANDROID: kbuild: do not merge .section..* into .section in modules
ANDROID: scsi: ufs: add ->map_sg_crypto() variant op
UPSTREAM: bpf: Explicitly memset some bpf info structures declared on the stack
UPSTREAM: bpf: Explicitly memset the bpf_attr structure
Linux 4.14.174
ipv4: ensure rcu_read_lock() in cipso_v4_error()
mm: slub: add missing TID bump in kmem_cache_alloc_bulk()
ARM: 8958/1: rename missed uaccess .fixup section
ARM: 8957/1: VDSO: Match ARMv8 timer in cntvct_functional()
jbd2: fix data races at struct journal_head
net: rmnet: fix NULL pointer dereference in rmnet_newlink()
hinic: fix a bug of setting hw_ioctxt
slip: not call free_netdev before rtnl_unlock in slip_open
signal: avoid double atomic counter increments for user accounting
mac80211: rx: avoid RCU list traversal under mutex
net: ks8851-ml: Fix IRQ handling and locking
net: usb: qmi_wwan: restore mtu min/max values after raw_ip switch
scsi: libfc: free response frame from GPN_ID
cfg80211: check reg_rule for NULL in handle_channel_custom()
HID: i2c-hid: add Trekstor Surfbook E11B to descriptor override
HID: apple: Add support for recent firmware on Magic Keyboards
ACPI: watchdog: Allow disabling WDAT at boot
perf/amd/uncore: Replace manual sampling check with CAP_NO_INTERRUPT flag
batman-adv: Don't schedule OGM for disabled interface
batman-adv: Avoid free/alloc race when handling OGM buffer
batman-adv: Avoid free/alloc race when handling OGM2 buffer
batman-adv: Fix duplicated OGMs on NETDEV_UP
batman-adv: Fix debugfs path for renamed softif
batman-adv: Fix debugfs path for renamed hardif
batman-adv: prevent TT request storms by not sending inconsistent TT TLVLs
batman-adv: Fix TT sync flags for intermediate TT responses
batman-adv: Avoid race in TT TVLV allocator helper
batman-adv: update data pointers after skb_cow()
batman-adv: Fix internal interface indices types
batman-adv: Fix lock for ogm cnt access in batadv_iv_ogm_calc_tq
batman-adv: Fix check of retrieved orig_gw in batadv_v_gw_is_eligible
batman-adv: Always initialize fragment header priority
batman-adv: Avoid spurious warnings from bat_v neigh_cmp implementation
efi: Add a sanity check to efivar_store_raw()
net/smc: check for valid ib_client_data
ipv6: restrict IPV6_ADDRFORM operation
i2c: acpi: put device when verifying client fails
iommu/vt-d: Ignore devices with out-of-spec domain number
iommu/vt-d: Fix the wrong printing in RHSA parsing
netfilter: nft_payload: add missing attribute validation for payload csum flags
netfilter: cthelper: add missing attribute validation for cthelper
nl80211: add missing attribute validation for channel switch
nl80211: add missing attribute validation for beacon report scanning
nl80211: add missing attribute validation for critical protocol indication
pinctrl: core: Remove extra kref_get which blocks hogs being freed
pinctrl: meson-gxl: fix GPIOX sdio pins
iommu/vt-d: Fix a bug in intel_iommu_iova_to_phys() for huge page
iommu/vt-d: dmar: replace WARN_TAINT with pr_warn + add_taint
iommu/dma: Fix MSI reservation allocation
x86/mce: Fix logic and comments around MSR_PPIN_CTL
efi: Fix a race and a buffer overflow while reading efivars via sysfs
ARC: define __ALIGN_STR and __ALIGN symbols for ARC
KVM: x86: clear stale x86_emulate_ctxt->intercept value
gfs2_atomic_open(): fix O_EXCL|O_CREAT handling on cold dcache
cifs_atomic_open(): fix double-put on late allocation failure
ktest: Add timeout for ssh sync testing
drm/amd/display: remove duplicated assignment to grph_obj_type
workqueue: don't use wq_select_unbound_cpu() for bound works
iommu/vt-d: quirk_ioat_snb_local_iommu: replace WARN_TAINT with pr_warn + add_taint
virtio-blk: fix hw_queue stopped on arbitrary error
iwlwifi: mvm: Do not require PHY_SKU NVM section for 3168 devices
cgroup: Iterate tasks that did not finish do_exit()
cgroup: cgroup_procs_next should increase position index
ipvlan: don't deref eth hdr before checking it's set
ipvlan: egress mcast packets are not exceptional
ipvlan: do not add hardware address of master to its unicast filter list
inet_diag: return classid for all socket types
macvlan: add cond_resched() during multicast processing
net: fec: validate the new settings in fec_enet_set_coalesce()
slip: make slhc_compress() more robust against malicious packets
bonding/alb: make sure arp header is pulled before accessing it
net: phy: fix MDIO bus PM PHY resuming
nfc: add missing attribute validation for vendor subcommand
nfc: add missing attribute validation for SE API
team: add missing attribute validation for array index
team: add missing attribute validation for port ifindex
net: fq: add missing attribute validation for orphan mask
macsec: add missing attribute validation for port
can: add missing attribute validation for termination
nl802154: add missing attribute validation for dev_type
nl802154: add missing attribute validation
fib: add missing attribute validation for tun_id
net: memcg: fix lockdep splat in inet_csk_accept()
net: memcg: late association of sock to memcg
cgroup: memcg: net: do not associate sock with unrelated cgroup
bnxt_en: reinitialize IRQs when MTU is modified
sfc: detach from cb_page in efx_copy_channel()
r8152: check disconnect status after long sleep
net/packet: tpacket_rcv: do not increment ring index on drop
net: nfc: fix bounds checking bugs on "pipe"
net: macsec: update SCI upon MAC address change.
netlink: Use netlink header as base to calculate bad attribute offset
ipvlan: do not use cond_resched_rcu() in ipvlan_process_multicast()
ipvlan: add cond_resched_rcu() while processing muticast backlog
ipv6/addrconf: call ipv6_mc_up() for non-Ethernet interface
gre: fix uninit-value in __iptunnel_pull_header
cgroup, netclassid: periodically release file_lock on classid updating
net: phy: Avoid multiple suspends
phy: Revert toggling reset changes.
ANDROID: Incremental fs: Add INCFS_IOC_PERMIT_FILL
ANDROID: Incremental fs: Remove signature checks from kernel
ANDROID: Incremental fs: Pad hash blocks
ANDROID: Incremental fs: Make fill block an ioctl
ANDROID: Incremental fs: Remove all access_ok checks
UPSTREAM: cgroup: Iterate tasks that did not finish do_exit()
UPSTREAM: arm64: memory: Add missing brackets to untagged_addr() macro
UPSTREAM: mm: Avoid creating virtual address aliases in brk()/mmap()/mremap()
ANDROID: Add TPM support and the vTPM proxy to Cuttlefish.
ANDROID: serdev: restrict claim of platform devices
UPSTREAM: fscrypt: don't evict dirty inodes after removing key
fscrypt: don't evict dirty inodes after removing key
Linux 4.14.173
ASoC: topology: Fix memleak in soc_tplg_manifest_load()
xhci: handle port status events for removed USB3 hcd
dm integrity: fix a deadlock due to offloading to an incorrect workqueue
powerpc: fix hardware PMU exception bug on PowerVM compatibility mode systems
dmaengine: coh901318: Fix a double lock bug in dma_tc_handle()
hwmon: (adt7462) Fix an error return in ADT7462_REG_VOLT()
ARM: imx: build v7_cpu_resume() unconditionally
IB/hfi1, qib: Ensure RCU is locked when accessing list
RMDA/cm: Fix missing ib_cm_destroy_id() in ib_cm_insert_listen()
RDMA/iwcm: Fix iwcm work deallocation
ASoC: dapm: Correct DAPM handling of active widgets during shutdown
ASoC: pcm512x: Fix unbalanced regulator enable call in probe error path
ASoC: pcm: Fix possible buffer overflow in dpcm state sysfs output
ASoC: intel: skl: Fix possible buffer overflow in debug outputs
ASoC: intel: skl: Fix pin debug prints
ASoC: topology: Fix memleak in soc_tplg_link_elems_load()
ARM: dts: ls1021a: Restore MDIO compatible to gianfar
dm cache: fix a crash due to incorrect work item cancelling
dmaengine: tegra-apb: Prevent race conditions of tasklet vs free list
dmaengine: tegra-apb: Fix use-after-free
x86/pkeys: Manually set X86_FEATURE_OSPKE to preserve existing changes
vt: selection, push sel_lock up
vt: selection, push console lock down
vt: selection, close sel_buffer race
serial: 8250_exar: add support for ACCES cards
tty:serial:mvebu-uart:fix a wrong return
arm: dts: dra76x: Fix mmc3 max-frequency
fat: fix uninit-memory access for partial initialized inode
mm, numa: fix bad pmd by atomically check for pmd_trans_huge when marking page tables prot_numa
vgacon: Fix a UAF in vgacon_invert_region
usb: core: port: do error out if usb_autopm_get_interface() fails
usb: core: hub: do error out if usb_autopm_get_interface() fails
usb: core: hub: fix unhandled return by employing a void function
usb: quirks: add NO_LPM quirk for Logitech Screen Share
usb: storage: Add quirk for Samsung Fit flash
cifs: don't leak -EAGAIN for stat() during reconnect
net: thunderx: workaround BGX TX Underflow issue
x86/xen: Distribute switch variables for initialization
nvme: Fix uninitialized-variable warning
x86/boot/compressed: Don't declare __force_order in kaslr_64.c
s390/cio: cio_ignore_proc_seq_next should increase position index
watchdog: da9062: do not ping the hw during stop()
net: ks8851-ml: Fix 16-bit IO operation
net: ks8851-ml: Fix 16-bit data access
net: ks8851-ml: Remove 8-bit bus accessors
drm/msm/dsi: save pll state before dsi host is powered off
drm: msm: Fix return type of dsi_mgr_connector_mode_valid for kCFI
drm/msm/mdp5: rate limit pp done timeout warnings
usb: gadget: serial: fix Tx stall after buffer overflow
usb: gadget: ffs: ffs_aio_cancel(): Save/restore IRQ flags
usb: gadget: composite: Support more than 500mA MaxPower
selftests: fix too long argument
serial: ar933x_uart: set UART_CS_{RX,TX}_READY_ORIDE
kprobes: Fix optimize_kprobe()/unoptimize_kprobe() cancellation logic
RDMA/core: Fix use of logical OR in get_new_pps
RDMA/core: Fix pkey and port assignment in get_new_pps
net: dsa: bcm_sf2: Forcibly configure IMP port for 1Gb/sec
EDAC/amd64: Set grain per DIMM
x86/mce: Handle varying MCA bank counts
vhost: Check docket sk_family instead of call getname
audit: always check the netlink payload length in audit_receive_msg()
Revert "char/random: silence a lockdep splat with printk()"
mm, thp: fix defrag setting if newline is not used
mm/huge_memory.c: use head to check huge zero page
perf hists browser: Restore ESC as "Zoom out" of DSO/thread/etc
kprobes: Set unoptimized flag after unoptimizing code
drivers: net: xgene: Fix the order of the arguments of 'alloc_etherdev_mqs()'
tuntap: correctly set SOCKWQ_ASYNC_NOSPACE
KVM: Check for a bad hva before dropping into the ghc slow path
KVM: SVM: Override default MMIO mask if memory encryption is enabled
mwifiex: drop most magic numbers from mwifiex_process_tdls_action_frame()
namei: only return -ECHILD from follow_dotdot_rcu()
net: ena: make ena rxfh support ETH_RSS_HASH_NO_CHANGE
net: atlantic: fix potential error handling
net: netlink: cap max groups which will be considered in netlink_bind()
include/linux/bitops.h: introduce BITS_PER_TYPE
ecryptfs: Fix up bad backport of fe2e082f5da5b4a0a92ae32978f81507ef37ec66
usb: charger: assign specific number for enum value
drm/i915/gvt: Separate display reset from ALL_ENGINES reset
i2c: jz4780: silence log flood on txabrt
i2c: altera: Fix potential integer overflow
MIPS: VPE: Fix a double free and a memory leak in 'release_vpe()'
HID: hiddev: Fix race in in hiddev_disconnect()
Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"
tracing: Disable trace_printk() on post poned tests
HID: core: increase HID report buffer size to 8KiB
HID: core: fix off-by-one memset in hid_report_raw_event()
HID: ite: Only bind to keyboard USB interface on Acer SW5-012 keyboard dock
KVM: VMX: check descriptor table exits on instruction emulation
ACPI: watchdog: Fix gas->access_width usage
ACPICA: Introduce ACPI_ACCESS_BYTE_WIDTH() macro
audit: fix error handling in audit_data_to_entry()
ext4: potential crash on allocation error in ext4_alloc_flex_bg_array()
net: sched: correct flower port blocking
qede: Fix race between rdma destroy workqueue and link change event
ipv6: Fix route replacement with dev-only route
ipv6: Fix nlmsg_flags when splitting a multipath route
sctp: move the format error check out of __sctp_sf_do_9_1_abort
nfc: pn544: Fix occasional HW initialization failure
net: phy: restore mdio regs in the iproc mdio driver
net: fib_rules: Correctly set table field when table number exceeds 8 bits
sysrq: Remove duplicated sysrq message
sysrq: Restore original console_loglevel when sysrq disabled
cfg80211: add missing policy for NL80211_ATTR_STATUS_CODE
cifs: Fix mode output in debugging statements
net: ena: ena-com.c: prevent NULL pointer dereference
net: ena: ethtool: use correct value for crc32 hash
net: ena: fix incorrectly saving queue numbers when setting RSS indirection table
net: ena: rss: store hash function as values and not bits
net: ena: rss: fix failure to get indirection table
net: ena: fix incorrect default RSS key
net: ena: add missing ethtool TX timestamping indication
net: ena: fix uses of round_jiffies()
net: ena: fix potential crash when rxfh key is NULL
qmi_wwan: unconditionally reject 2 ep interfaces
qmi_wwan: re-add DW5821e pre-production variant
cfg80211: check wiphy driver existence for drvinfo report
mac80211: consider more elements in parsing CRC
dax: pass NOWAIT flag to iomap_apply
drm/msm: Set dma maximum segment size for mdss
ipmi:ssif: Handle a possible NULL pointer reference
ext4: fix potential race between s_group_info online resizing and access
ext4: fix potential race between s_flex_groups online resizing and access
ext4: fix potential race between online resizing and write operations
netfilter: nf_conntrack: resolve clash for matching conntracks
iwlwifi: pcie: fix rb_allocator workqueue allocation
FROMLIST: f2fs: fix wrong check on F2FS_IOC_FSSETXATTR
UPSTREAM: binder: prevent UAF for binderfs devices II
UPSTREAM: binder: prevent UAF for binderfs devices
FROMLIST: lib: test_stackinit.c: XFAIL switch variable init tests
ANDROID: cuttlefish: disable KPROBES
ANDROID: scsi: ufs: allow ufs variants to override sg entry size
FROMLIST: ufs: fix a bug on printing PRDT
BACKPORT: loop: Add LOOP_SET_BLOCK_SIZE in compat ioctl
ANDROID: fix build issue in security/selinux/avc.c
ANDROID: cuttlefish_defconfig: Disable CONFIG_RT_GROUP_SCHED
ANDROID: Enable HID_NINTENDO as y
FROMLIST: HID: nintendo: add nintendo switch controller driver
Linux 4.14.172
s390/mm: Explicitly compare PAGE_DEFAULT_KEY against zero in storage_key_init_range
xen: Enable interrupts when calling _cond_resched()
ata: ahci: Add shutdown to freeze hardware resources of ahci
netfilter: xt_hashlimit: limit the max size of hashtable
ALSA: seq: Fix concurrent access to queue current tick/time
ALSA: seq: Avoid concurrent access to queue flags
ALSA: rawmidi: Avoid bit fields for state flags
genirq/proc: Reject invalid affinity masks (again)
iommu/vt-d: Fix compile warning from intel-svm.h
ecryptfs: replace BUG_ON with error handling code
staging: greybus: use after free in gb_audio_manager_remove_all()
staging: rtl8723bs: fix copy of overlapping memory
usb: gadget: composite: Fix bMaxPower for SuperSpeedPlus
scsi: Revert "target: iscsi: Wait for all commands to finish before freeing a session"
scsi: Revert "RDMA/isert: Fix a recently introduced regression related to logout"
Btrfs: fix btrfs_wait_ordered_range() so that it waits for all ordered extents
btrfs: do not check delayed items are empty for single transaction cleanup
btrfs: fix bytes_may_use underflow in prealloc error condtition
KVM: apic: avoid calculating pending eoi from an uninitialized val
KVM: nVMX: handle nested posted interrupts when apicv is disabled for L1
KVM: nVMX: Check IO instruction VM-exit conditions
KVM: nVMX: Refactor IO bitmap checks into helper function
ext4: fix race between writepages and enabling EXT4_EXTENTS_FL
ext4: rename s_journal_flag_rwsem to s_writepages_rwsem
ext4: fix mount failure with quota configured as module
ext4: add cond_resched() to __ext4_find_entry()
ext4: fix a data race in EXT4_I(inode)->i_disksize
KVM: nVMX: Don't emulate instructions in guest mode
lib/stackdepot.c: fix global out-of-bounds in stack_slabs
serial: 8250: Check UPF_IRQ_SHARED in advance
vt: vt_ioctl: fix race in VT_RESIZEX
VT_RESIZEX: get rid of field-by-field copyin
xhci: apply XHCI_PME_STUCK_QUIRK to Intel Comet Lake platforms
KVM: x86: don't notify userspace IOAPIC on edge-triggered interrupt EOI
drm/amdgpu/soc15: fix xclk for raven
mm/vmscan.c: don't round up scan size for online memory cgroup
Revert "ipc,sem: remove uneeded sem_undo_list lock usage in exit_sem()"
MAINTAINERS: Update drm/i915 bug filing URL
serdev: ttyport: restore client ops on deregistration
tty: serial: imx: setup the correct sg entry for tx dma
tty/serial: atmel: manage shutdown in case of RS485 or ISO7816 mode
x86/mce/amd: Fix kobject lifetime
x86/mce/amd: Publish the bank pointer only after setup has succeeded
staging: rtl8723bs: Fix potential overuse of kernel memory
staging: rtl8723bs: Fix potential security hole
staging: rtl8188eu: Fix potential overuse of kernel memory
staging: rtl8188eu: Fix potential security hole
USB: hub: Fix the broken detection of USB3 device in SMSC hub
USB: hub: Don't record a connect-change event during reset-resume
USB: Fix novation SourceControl XL after suspend
usb: uas: fix a plug & unplug racing
usb: host: xhci: update event ring dequeue pointer on purpose
xhci: fix runtime pm enabling for quirky Intel hosts
xhci: Force Maximum Packet size for Full-speed bulk devices to valid range.
staging: vt6656: fix sign of rx_dbm to bb_pre_ed_rssi.
staging: android: ashmem: Disallow ashmem memory from being remapped
vt: selection, handle pending signals in paste_selection
floppy: check FDC index for errors before assigning it
USB: misc: iowarrior: add support for the 100 device
USB: misc: iowarrior: add support for the 28 and 28L devices
USB: misc: iowarrior: add support for 2 OEMed devices
thunderbolt: Prevent crash if non-active NVMem file is read
net/smc: fix leak of kernel memory to user space
net/sched: flower: add missing validation of TCA_FLOWER_FLAGS
net/sched: matchall: add missing validation of TCA_MATCHALL_FLAGS
net: dsa: tag_qca: Make sure there is headroom for tag
enic: prevent waking up stopped tx queues over watchdog reset
selinux: ensure we cleanup the internal AVC counters on error in avc_update()
mlxsw: spectrum_dpipe: Add missing error path
virtio_balloon: prevent pfn array overflow
help_next should increase position index
brd: check and limit max_part par
microblaze: Prevent the overflow of the start
iwlwifi: mvm: Fix thermal zone registration
irqchip/gic-v3-its: Reference to its_invall_cmd descriptor when building INVALL
bcache: explicity type cast in bset_bkey_last()
reiserfs: prevent NULL pointer dereference in reiserfs_insert_item()
lib/scatterlist.c: adjust indentation in __sg_alloc_table
ocfs2: fix a NULL pointer dereference when call ocfs2_update_inode_fsync_trans()
radeon: insert 10ms sleep in dce5_crtc_load_lut
trigger_next should increase position index
ftrace: fpid_next() should increase position index
drm/nouveau/disp/nv50-: prevent oops when no channel method map provided
irqchip/gic-v3: Only provision redistributors that are enabled in ACPI
ceph: check availability of mds cluster on mount after wait timeout
cifs: fix NULL dereference in match_prepath
iwlegacy: ensure loop counter addr does not wrap and cause an infinite loop
hostap: Adjust indentation in prism2_hostapd_add_sta
ARM: 8951/1: Fix Kexec compilation issue.
jbd2: make sure ESHUTDOWN to be recorded in the journal superblock
jbd2: switch to use jbd2_journal_abort() when failed to submit the commit record
powerpc/sriov: Remove VF eeh_dev state when disabling SR-IOV
ALSA: hda - Add docking station support for Lenovo Thinkpad T420s
driver core: platform: fix u32 greater or equal to zero comparison
s390/ftrace: generate traced function stack frame
x86/decoder: Add TEST opcode to Group3-2
ALSA: hda/hdmi - add retry logic to parse_intel_hdmi()
irqchip/mbigen: Set driver .suppress_bind_attrs to avoid remove problems
remoteproc: Initialize rproc_class before use
btrfs: device stats, log when stats are zeroed
btrfs: safely advance counter when looking up bio csums
btrfs: fix possible NULL-pointer dereference in integrity checks
pwm: Remove set but not set variable 'pwm'
ide: serverworks: potential overflow in svwks_set_pio_mode()
cmd64x: potential buffer overflow in cmd64x_program_timings()
pwm: omap-dmtimer: Remove PWM chip in .remove before making it unfunctional
x86/mm: Fix NX bit clearing issue in kernel_map_pages_in_pgd
f2fs: fix memleak of kobject
watchdog/softlockup: Enforce that timestamp is valid on boot
arm64: fix alternatives with LLVM's integrated assembler
scsi: iscsi: Don't destroy session if there are outstanding connections
f2fs: free sysfs kobject
iommu/arm-smmu-v3: Use WRITE_ONCE() when changing validity of an STE
usb: musb: omap2430: Get rid of musb .set_vbus for omap2430 glue
drm/vmwgfx: prevent memory leak in vmw_cmdbuf_res_add
drm/nouveau: Fix copy-paste error in nouveau_fence_wait_uevent_handler
drm/nouveau/gr/gk20a,gm200-: add terminators to method lists read from fw
drm/nouveau/secboot/gm20b: initialize pointer in gm20b_secboot_new()
vme: bridges: reduce stack usage
driver core: Print device when resources present in really_probe()
driver core: platform: Prevent resouce overflow from causing infinite loops
tty: synclink_gt: Adjust indentation in several functions
tty: synclinkmp: Adjust indentation in several functions
ASoC: atmel: fix build error with CONFIG_SND_ATMEL_SOC_DMA=m
wan: ixp4xx_hss: fix compile-testing on 64-bit
Input: edt-ft5x06 - work around first register access error
rcu: Use WRITE_ONCE() for assignments to ->pprev for hlist_nulls
efi/x86: Don't panic or BUG() on non-critical error conditions
soc/tegra: fuse: Correct straps' address for older Tegra124 device trees
IB/hfi1: Add software counter for ctxt0 seq drop
udf: Fix free space reporting for metadata and virtual partitions
usbip: Fix unsafe unaligned pointer usage
drm: remove the newline for CRC source name.
tools lib api fs: Fix gcc9 stringop-truncation compilation error
ALSA: sh: Fix compile warning wrt const
ALSA: sh: Fix unused variable warnings
clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock
RDMA/rxe: Fix error type of mmap_offset
pinctrl: sh-pfc: sh7269: Fix CAN function GPIOs
PM / devfreq: rk3399_dmc: Add COMPILE_TEST and HAVE_ARM_SMCCC dependency
x86/vdso: Provide missing include file
dmaengine: Store module owner in dma_device struct
ARM: dts: r8a7779: Add device node for ARM global timer
drm/mediatek: handle events when enabling/disabling crtc
scsi: aic7xxx: Adjust indentation in ahc_find_syncrate
scsi: ufs: Complete pending requests in host reset and restore path
ACPICA: Disassembler: create buffer fields in ACPI_PARSE_LOAD_PASS1
orinoco: avoid assertion in case of NULL pointer
rtlwifi: rtl_pci: Fix -Wcast-function-type
iwlegacy: Fix -Wcast-function-type
ipw2x00: Fix -Wcast-function-type
b43legacy: Fix -Wcast-function-type
ALSA: usx2y: Adjust indentation in snd_usX2Y_hwdep_dsp_status
fore200e: Fix incorrect checks of NULL pointer dereference
reiserfs: Fix spurious unlock in reiserfs_fill_super() error handling
media: v4l2-device.h: Explicitly compare grp{id,mask} to zero in v4l2_device macros
ARM: dts: imx6: rdu2: Disable WP for USDHC2 and USDHC3
arm64: dts: qcom: msm8996: Disable USB2 PHY suspend by core
NFC: port100: Convert cpu_to_le16(le16_to_cpu(E1) + E2) to use le16_add_cpu().
PCI/IOV: Fix memory leak in pci_iov_add_virtfn()
net/wan/fsl_ucc_hdlc: reject muram offsets above 64K
regulator: rk808: Lower log level on optional GPIOs being not available
drm/amdgpu: remove 4 set but not used variable in amdgpu_atombios_get_connector_info_from_object_table
clk: qcom: rcg2: Don't crash if our parent can't be found; return an error
kconfig: fix broken dependency in randconfig-generated .config
KVM: s390: ENOTSUPP -> EOPNOTSUPP fixups
nbd: add a flush_workqueue in nbd_start_device
ext4, jbd2: ensure panic when aborting with zero errno
tracing: Fix very unlikely race of registering two stat tracers
tracing: Fix tracing_stat return values in error handling paths
x86/sysfb: Fix check for bad VRAM size
jbd2: clear JBD2_ABORT flag before journal_reset to update log tail info when load journal
kselftest: Minimise dependency of get_size on C library interfaces
clocksource/drivers/bcm2835_timer: Fix memory leak of timer
usb: dwc2: Fix IN FIFO allocation
usb: gadget: udc: fix possible sleep-in-atomic-context bugs in gr_probe()
uio: fix a sleep-in-atomic-context bug in uio_dmem_genirq_irqcontrol()
sparc: Add .exit.data section.
MIPS: Loongson: Fix potential NULL dereference in loongson3_platform_init()
efi/x86: Map the entire EFI vendor string before copying it
pinctrl: baytrail: Do not clear IRQ flags on direct-irq enabled pins
media: sti: bdisp: fix a possible sleep-in-atomic-context bug in bdisp_device_run()
char/random: silence a lockdep splat with printk()
gpio: gpio-grgpio: fix possible sleep-in-atomic-context bugs in grgpio_irq_map/unmap()
powerpc/powernv/iov: Ensure the pdn for VFs always contains a valid PE number
media: i2c: mt9v032: fix enum mbus codes and frame sizes
pxa168fb: Fix the function used to release some memory in an error handling path
pinctrl: sh-pfc: sh7264: Fix CAN function GPIOs
gianfar: Fix TX timestamping with a stacked DSA driver
ALSA: ctl: allow TLV read operation for callback type of element in locked case
ext4: fix ext4_dax_read/write inode locking sequence for IOCB_NOWAIT
leds: pca963x: Fix open-drain initialization
brcmfmac: Fix use after free in brcmf_sdio_readframes()
cpu/hotplug, stop_machine: Fix stop_machine vs hotplug order
drm/gma500: Fixup fbdev stolen size usage evaluation
KVM: nVMX: Use correct root level for nested EPT shadow page tables
Revert "KVM: VMX: Add non-canonical check on writes to RTIT address MSRs"
Revert "KVM: nVMX: Use correct root level for nested EPT shadow page tables"
scsi: qla2xxx: fix a potential NULL pointer dereference
jbd2: do not clear the BH_Mapped flag when forgetting a metadata buffer
jbd2: move the clearing of b_modified flag to the journal_unmap_buffer()
hwmon: (pmbus/ltc2978) Fix PMBus polling of MFR_COMMON definitions.
perf/x86/intel: Fix inaccurate period in context switch for auto-reload
s390/time: Fix clk type in get_tod_clock
RDMA/core: Fix protection fault in get_pkey_idx_qp_list
IB/hfi1: Close window for pq and request coliding
serial: imx: Only handle irqs that are actually enabled
serial: imx: ensure that RX irqs are off if RX is off
padata: Remove broken queue flushing
perf/x86/amd: Add missing L2 misses event spec to AMD Family 17h's event map
KVM: nVMX: Use correct root level for nested EPT shadow page tables
arm64: ssbs: Fix context-switch when SSBS is present on all CPUs
btrfs: log message when rw remount is attempted with unclean tree-log
btrfs: print message when tree-log replay starts
Btrfs: fix race between using extent maps and merging them
ext4: improve explanation of a mount failure caused by a misconfigured kernel
ext4: fix checksum errors with indexed dirs
ext4: fix support for inode sizes > 1024 bytes
ext4: don't assume that mmp_nodename/bdevname have NUL
ARM: 8723/2: always assume the "unified" syntax for assembly code
arm64: nofpsimd: Handle TIF_FOREIGN_FPSTATE flag cleanly
arm64: ptrace: nofpsimd: Fail FP/SIMD regset operations
arm64: cpufeature: Set the FP/SIMD compat HWCAP bits properly
ALSA: usb-audio: Apply sample rate quirk for Audioengine D1
Input: synaptics - remove the LEN0049 dmi id from topbuttonpad list
Input: synaptics - enable SMBus on ThinkPad L470
Input: synaptics - switch T470s to RMI4 by default
ecryptfs: fix a memory leak bug in ecryptfs_init_messaging()
ecryptfs: fix a memory leak bug in parse_tag_1_packet()
ASoC: sun8i-codec: Fix setting DAI data format
ALSA: hda: Use scnprintf() for printing texts for sysfs/procfs
iommu/qcom: Fix bogus detach logic
KVM: x86: emulate RDPID
UPSTREAM: sched/psi: Fix OOB write when writing 0 bytes to PSI files
UPSTREAM: psi: Fix a division error in psi poll()
UPSTREAM: sched/psi: Fix sampling error and rare div0 crashes with cgroups and high uptime
UPSTREAM: sched/psi: Correct overly pessimistic size calculation
FROMLIST: f2fs: Handle casefolding with Encryption
FROMLIST: fscrypt: Have filesystems handle their d_ops
FROMLIST: ext4: Use generic casefolding support
FROMLIST: f2fs: Use generic casefolding support
FROMLIST: Add standard casefolding support
FROMLIST: unicode: Add utf8_casefold_hash
ANDROID: cuttlefish_defconfig: Add CONFIG_UNICODE
ANDROID: sdcardfs: fix -ENOENT lookup race issue
ANDROID: gki_defconfig: Enable CONFIG_RD_LZ4
ANDROID: dm: Add wrapped key support in dm-default-key
ANDROID: dm: add support for passing through derive_raw_secret
ANDROID: block: Prevent crypto fallback for wrapped keys
ANDROID: Disable wq fp check in CFI builds
ANDROID: increase limit on sched-tune boost groups
ANDROID: ufs, block: fix crypto power management and move into block layer
ANDROID: Incremental fs: Support xattrs
ANDROID: test_stackinit: work around LLVM PR44916
ANDROID: clang: update to 10.0.4
fs-verity: use u64_to_user_ptr()
fs-verity: use mempool for hash requests
fs-verity: implement readahead of Merkle tree pages
ext4: readpages() should submit IO as read-ahead
fs-verity: implement readahead for FS_IOC_ENABLE_VERITY
fscrypt: improve format of no-key names
ubifs: allow both hash and disk name to be provided in no-key names
ubifs: don't trigger assertion on invalid no-key filename
fscrypt: clarify what is meant by a per-file key
fscrypt: derive dirhash key for casefolded directories
fscrypt: don't allow v1 policies with casefolding
fscrypt: add "fscrypt_" prefix to fname_encrypt()
fscrypt: don't print name of busy file when removing key
fscrypt: document gfp_flags for bounce page allocation
fscrypt: optimize fscrypt_zeroout_range()
fscrypt: remove redundant bi_status check
fscrypt: Allow modular crypto algorithms
fscrypt: include <linux/ioctl.h> in UAPI header
fscrypt: don't check for ENOKEY from fscrypt_get_encryption_info()
fscrypt: remove fscrypt_is_direct_key_policy()
fscrypt: move fscrypt_valid_enc_modes() to policy.c
fscrypt: check for appropriate use of DIRECT_KEY flag earlier
fscrypt: split up fscrypt_supported_policy() by policy version
fscrypt: introduce fscrypt_needs_contents_encryption()
fscrypt: move fscrypt_d_revalidate() to fname.c
fscrypt: constify inode parameter to filename encryption functions
fscrypt: constify struct fscrypt_hkdf parameter to fscrypt_hkdf_expand()
fscrypt: verify that the crypto_skcipher has the correct ivsize
fscrypt: use crypto_skcipher_driver_name()
fscrypt: support passing a keyring key to FS_IOC_ADD_ENCRYPTION_KEY
keys: Export lookup_user_key to external users
f2fs: fix build error on PAGE_KERNEL_RO
Conflicts:
arch/arm64/kernel/smp.c
arch/arm64/kernel/traps.c
block/blk-crypto-fallback.c
block/keyslot-manager.c
drivers/base/power/wakeup.c
drivers/clk/clk.c
drivers/clk/qcom/clk-rcg2.c
drivers/gpu/Makefile
drivers/gpu/drm/msm/msm_drv.c
drivers/gpu/drm/msm/msm_gem.c
drivers/hwtracing/coresight/coresight-funnel.c
drivers/irqchip/irq-gic-v3.c
drivers/md/dm.c
drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c
drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
drivers/net/macsec.c
drivers/net/phy/micrel.c
drivers/net/wireless/ath/wil6210/cfg80211.c
drivers/net/wireless/ath/wil6210/fw_inc.c
drivers/net/wireless/ath/wil6210/pcie_bus.c
drivers/net/wireless/ath/wil6210/pm.c
drivers/net/wireless/ath/wil6210/wil6210.h
drivers/of/base.c
drivers/power/supply/power_supply_sysfs.c
drivers/rpmsg/qcom_glink_smem.c
drivers/scsi/sd.c
drivers/scsi/ufs/ufshcd-crypto.c
drivers/scsi/ufs/ufshcd.c
drivers/scsi/ufs/ufshcd.h
drivers/scsi/ufs/ufshci.h
drivers/usb/dwc3/core.c
drivers/usb/dwc3/gadget.c
drivers/usb/gadget/Kconfig
drivers/usb/gadget/composite.c
drivers/usb/gadget/function/f_fs.c
drivers/usb/gadget/legacy/Makefile
drivers/usb/host/xhci-mem.c
fs/ext4/readpage.c
fs/sdcardfs/lookup.c
include/linux/key.h
include/linux/keyslot-manager.h
include/linux/power_supply.h
include/uapi/linux/coresight-stm.h
net/qrtr/qrtr.c
Change-Id: Iaa9fcbe987e721f02596e167249a519781ed3888
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
3236 lines
101 KiB
C
3236 lines
101 KiB
C
/*
|
|
* IEEE 802.11 defines
|
|
*
|
|
* Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
|
|
* <jkmaline@cc.hut.fi>
|
|
* Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
|
|
* Copyright (c) 2005, Devicescape Software, Inc.
|
|
* Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
|
|
* Copyright (c) 2013 - 2014 Intel Mobile Communications GmbH
|
|
* Copyright (c) 2016 - 2017 Intel Deutschland GmbH
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#ifndef LINUX_IEEE80211_H
|
|
#define LINUX_IEEE80211_H
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/if_ether.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <asm/byteorder.h>
|
|
#include <asm/unaligned.h>
|
|
|
|
/*
|
|
* DS bit usage
|
|
*
|
|
* TA = transmitter address
|
|
* RA = receiver address
|
|
* DA = destination address
|
|
* SA = source address
|
|
*
|
|
* ToDS FromDS A1(RA) A2(TA) A3 A4 Use
|
|
* -----------------------------------------------------------------
|
|
* 0 0 DA SA BSSID - IBSS/DLS
|
|
* 0 1 DA BSSID SA - AP -> STA
|
|
* 1 0 BSSID SA DA - AP <- STA
|
|
* 1 1 RA TA DA SA unspecified (WDS)
|
|
*/
|
|
|
|
#define FCS_LEN 4
|
|
|
|
#define IEEE80211_FCTL_VERS 0x0003
|
|
#define IEEE80211_FCTL_FTYPE 0x000c
|
|
#define IEEE80211_FCTL_STYPE 0x00f0
|
|
#define IEEE80211_FCTL_TODS 0x0100
|
|
#define IEEE80211_FCTL_FROMDS 0x0200
|
|
#define IEEE80211_FCTL_MOREFRAGS 0x0400
|
|
#define IEEE80211_FCTL_RETRY 0x0800
|
|
#define IEEE80211_FCTL_PM 0x1000
|
|
#define IEEE80211_FCTL_MOREDATA 0x2000
|
|
#define IEEE80211_FCTL_PROTECTED 0x4000
|
|
#define IEEE80211_FCTL_ORDER 0x8000
|
|
#define IEEE80211_FCTL_CTL_EXT 0x0f00
|
|
|
|
#define IEEE80211_SCTL_FRAG 0x000F
|
|
#define IEEE80211_SCTL_SEQ 0xFFF0
|
|
|
|
#define IEEE80211_FTYPE_MGMT 0x0000
|
|
#define IEEE80211_FTYPE_CTL 0x0004
|
|
#define IEEE80211_FTYPE_DATA 0x0008
|
|
#define IEEE80211_FTYPE_EXT 0x000c
|
|
|
|
/* management */
|
|
#define IEEE80211_STYPE_ASSOC_REQ 0x0000
|
|
#define IEEE80211_STYPE_ASSOC_RESP 0x0010
|
|
#define IEEE80211_STYPE_REASSOC_REQ 0x0020
|
|
#define IEEE80211_STYPE_REASSOC_RESP 0x0030
|
|
#define IEEE80211_STYPE_PROBE_REQ 0x0040
|
|
#define IEEE80211_STYPE_PROBE_RESP 0x0050
|
|
#define IEEE80211_STYPE_BEACON 0x0080
|
|
#define IEEE80211_STYPE_ATIM 0x0090
|
|
#define IEEE80211_STYPE_DISASSOC 0x00A0
|
|
#define IEEE80211_STYPE_AUTH 0x00B0
|
|
#define IEEE80211_STYPE_DEAUTH 0x00C0
|
|
#define IEEE80211_STYPE_ACTION 0x00D0
|
|
|
|
/* control */
|
|
#define IEEE80211_STYPE_CTL_EXT 0x0060
|
|
#define IEEE80211_STYPE_BACK_REQ 0x0080
|
|
#define IEEE80211_STYPE_BACK 0x0090
|
|
#define IEEE80211_STYPE_PSPOLL 0x00A0
|
|
#define IEEE80211_STYPE_RTS 0x00B0
|
|
#define IEEE80211_STYPE_CTS 0x00C0
|
|
#define IEEE80211_STYPE_ACK 0x00D0
|
|
#define IEEE80211_STYPE_CFEND 0x00E0
|
|
#define IEEE80211_STYPE_CFENDACK 0x00F0
|
|
|
|
/* data */
|
|
#define IEEE80211_STYPE_DATA 0x0000
|
|
#define IEEE80211_STYPE_DATA_CFACK 0x0010
|
|
#define IEEE80211_STYPE_DATA_CFPOLL 0x0020
|
|
#define IEEE80211_STYPE_DATA_CFACKPOLL 0x0030
|
|
#define IEEE80211_STYPE_NULLFUNC 0x0040
|
|
#define IEEE80211_STYPE_CFACK 0x0050
|
|
#define IEEE80211_STYPE_CFPOLL 0x0060
|
|
#define IEEE80211_STYPE_CFACKPOLL 0x0070
|
|
#define IEEE80211_STYPE_QOS_DATA 0x0080
|
|
#define IEEE80211_STYPE_QOS_DATA_CFACK 0x0090
|
|
#define IEEE80211_STYPE_QOS_DATA_CFPOLL 0x00A0
|
|
#define IEEE80211_STYPE_QOS_DATA_CFACKPOLL 0x00B0
|
|
#define IEEE80211_STYPE_QOS_NULLFUNC 0x00C0
|
|
#define IEEE80211_STYPE_QOS_CFACK 0x00D0
|
|
#define IEEE80211_STYPE_QOS_CFPOLL 0x00E0
|
|
#define IEEE80211_STYPE_QOS_CFACKPOLL 0x00F0
|
|
|
|
/* extension, added by 802.11ad */
|
|
#define IEEE80211_STYPE_DMG_BEACON 0x0000
|
|
|
|
/* control extension - for IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTL_EXT */
|
|
#define IEEE80211_CTL_EXT_POLL 0x2000
|
|
#define IEEE80211_CTL_EXT_SPR 0x3000
|
|
#define IEEE80211_CTL_EXT_GRANT 0x4000
|
|
#define IEEE80211_CTL_EXT_DMG_CTS 0x5000
|
|
#define IEEE80211_CTL_EXT_DMG_DTS 0x6000
|
|
#define IEEE80211_CTL_EXT_SSW 0x8000
|
|
#define IEEE80211_CTL_EXT_SSW_FBACK 0x9000
|
|
#define IEEE80211_CTL_EXT_SSW_ACK 0xa000
|
|
|
|
|
|
#define IEEE80211_SN_MASK ((IEEE80211_SCTL_SEQ) >> 4)
|
|
#define IEEE80211_MAX_SN IEEE80211_SN_MASK
|
|
#define IEEE80211_SN_MODULO (IEEE80211_MAX_SN + 1)
|
|
|
|
static inline bool ieee80211_sn_less(u16 sn1, u16 sn2)
|
|
{
|
|
return ((sn1 - sn2) & IEEE80211_SN_MASK) > (IEEE80211_SN_MODULO >> 1);
|
|
}
|
|
|
|
static inline u16 ieee80211_sn_add(u16 sn1, u16 sn2)
|
|
{
|
|
return (sn1 + sn2) & IEEE80211_SN_MASK;
|
|
}
|
|
|
|
static inline u16 ieee80211_sn_inc(u16 sn)
|
|
{
|
|
return ieee80211_sn_add(sn, 1);
|
|
}
|
|
|
|
static inline u16 ieee80211_sn_sub(u16 sn1, u16 sn2)
|
|
{
|
|
return (sn1 - sn2) & IEEE80211_SN_MASK;
|
|
}
|
|
|
|
#define IEEE80211_SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4)
|
|
#define IEEE80211_SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ)
|
|
|
|
/* miscellaneous IEEE 802.11 constants */
|
|
#define IEEE80211_MAX_FRAG_THRESHOLD 2352
|
|
#define IEEE80211_MAX_RTS_THRESHOLD 2353
|
|
#define IEEE80211_MAX_AID 2007
|
|
#define IEEE80211_MAX_TIM_LEN 251
|
|
#define IEEE80211_MAX_MESH_PEERINGS 63
|
|
/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
|
|
6.2.1.1.2.
|
|
|
|
802.11e clarifies the figure in section 7.1.2. The frame body is
|
|
up to 2304 octets long (maximum MSDU size) plus any crypt overhead. */
|
|
#define IEEE80211_MAX_DATA_LEN 2304
|
|
/* 802.11ad extends maximum MSDU size for DMG (freq > 40Ghz) networks
|
|
* to 7920 bytes, see 8.2.3 General frame format
|
|
*/
|
|
#define IEEE80211_MAX_DATA_LEN_DMG 7920
|
|
/* 30 byte 4 addr hdr, 2 byte QoS, 2304 byte MSDU, 12 byte crypt, 4 byte FCS */
|
|
#define IEEE80211_MAX_FRAME_LEN 2352
|
|
|
|
/* Maximal size of an A-MSDU that can be transported in a HT BA session */
|
|
#define IEEE80211_MAX_MPDU_LEN_HT_BA 4095
|
|
|
|
/* Maximal size of an A-MSDU */
|
|
#define IEEE80211_MAX_MPDU_LEN_HT_3839 3839
|
|
#define IEEE80211_MAX_MPDU_LEN_HT_7935 7935
|
|
|
|
#define IEEE80211_MAX_MPDU_LEN_VHT_3895 3895
|
|
#define IEEE80211_MAX_MPDU_LEN_VHT_7991 7991
|
|
#define IEEE80211_MAX_MPDU_LEN_VHT_11454 11454
|
|
|
|
#define IEEE80211_MAX_SSID_LEN 32
|
|
|
|
#define IEEE80211_MAX_MESH_ID_LEN 32
|
|
|
|
#define IEEE80211_FIRST_TSPEC_TSID 8
|
|
#define IEEE80211_NUM_TIDS 16
|
|
|
|
/* number of user priorities 802.11 uses */
|
|
#define IEEE80211_NUM_UPS 8
|
|
/* number of ACs */
|
|
#define IEEE80211_NUM_ACS 4
|
|
|
|
#define IEEE80211_QOS_CTL_LEN 2
|
|
/* 1d tag mask */
|
|
#define IEEE80211_QOS_CTL_TAG1D_MASK 0x0007
|
|
/* TID mask */
|
|
#define IEEE80211_QOS_CTL_TID_MASK 0x000f
|
|
/* EOSP */
|
|
#define IEEE80211_QOS_CTL_EOSP 0x0010
|
|
/* ACK policy */
|
|
#define IEEE80211_QOS_CTL_ACK_POLICY_NORMAL 0x0000
|
|
#define IEEE80211_QOS_CTL_ACK_POLICY_NOACK 0x0020
|
|
#define IEEE80211_QOS_CTL_ACK_POLICY_NO_EXPL 0x0040
|
|
#define IEEE80211_QOS_CTL_ACK_POLICY_BLOCKACK 0x0060
|
|
#define IEEE80211_QOS_CTL_ACK_POLICY_MASK 0x0060
|
|
/* A-MSDU 802.11n */
|
|
#define IEEE80211_QOS_CTL_A_MSDU_PRESENT 0x0080
|
|
/* Mesh Control 802.11s */
|
|
#define IEEE80211_QOS_CTL_MESH_CONTROL_PRESENT 0x0100
|
|
|
|
/* Mesh Power Save Level */
|
|
#define IEEE80211_QOS_CTL_MESH_PS_LEVEL 0x0200
|
|
/* Mesh Receiver Service Period Initiated */
|
|
#define IEEE80211_QOS_CTL_RSPI 0x0400
|
|
|
|
/* U-APSD queue for WMM IEs sent by AP */
|
|
#define IEEE80211_WMM_IE_AP_QOSINFO_UAPSD (1<<7)
|
|
#define IEEE80211_WMM_IE_AP_QOSINFO_PARAM_SET_CNT_MASK 0x0f
|
|
|
|
/* U-APSD queues for WMM IEs sent by STA */
|
|
#define IEEE80211_WMM_IE_STA_QOSINFO_AC_VO (1<<0)
|
|
#define IEEE80211_WMM_IE_STA_QOSINFO_AC_VI (1<<1)
|
|
#define IEEE80211_WMM_IE_STA_QOSINFO_AC_BK (1<<2)
|
|
#define IEEE80211_WMM_IE_STA_QOSINFO_AC_BE (1<<3)
|
|
#define IEEE80211_WMM_IE_STA_QOSINFO_AC_MASK 0x0f
|
|
|
|
/* U-APSD max SP length for WMM IEs sent by STA */
|
|
#define IEEE80211_WMM_IE_STA_QOSINFO_SP_ALL 0x00
|
|
#define IEEE80211_WMM_IE_STA_QOSINFO_SP_2 0x01
|
|
#define IEEE80211_WMM_IE_STA_QOSINFO_SP_4 0x02
|
|
#define IEEE80211_WMM_IE_STA_QOSINFO_SP_6 0x03
|
|
#define IEEE80211_WMM_IE_STA_QOSINFO_SP_MASK 0x03
|
|
#define IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT 5
|
|
|
|
#define IEEE80211_HT_CTL_LEN 4
|
|
|
|
struct ieee80211_hdr {
|
|
__le16 frame_control;
|
|
__le16 duration_id;
|
|
u8 addr1[ETH_ALEN];
|
|
u8 addr2[ETH_ALEN];
|
|
u8 addr3[ETH_ALEN];
|
|
__le16 seq_ctrl;
|
|
u8 addr4[ETH_ALEN];
|
|
} __packed __aligned(2);
|
|
|
|
struct ieee80211_hdr_3addr {
|
|
__le16 frame_control;
|
|
__le16 duration_id;
|
|
u8 addr1[ETH_ALEN];
|
|
u8 addr2[ETH_ALEN];
|
|
u8 addr3[ETH_ALEN];
|
|
__le16 seq_ctrl;
|
|
} __packed __aligned(2);
|
|
|
|
struct ieee80211_qos_hdr {
|
|
__le16 frame_control;
|
|
__le16 duration_id;
|
|
u8 addr1[ETH_ALEN];
|
|
u8 addr2[ETH_ALEN];
|
|
u8 addr3[ETH_ALEN];
|
|
__le16 seq_ctrl;
|
|
__le16 qos_ctrl;
|
|
} __packed __aligned(2);
|
|
|
|
/**
|
|
* ieee80211_has_tods - check if IEEE80211_FCTL_TODS is set
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_has_tods(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_TODS)) != 0;
|
|
}
|
|
|
|
/**
|
|
* ieee80211_has_fromds - check if IEEE80211_FCTL_FROMDS is set
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_has_fromds(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_FROMDS)) != 0;
|
|
}
|
|
|
|
/**
|
|
* ieee80211_has_a4 - check if IEEE80211_FCTL_TODS and IEEE80211_FCTL_FROMDS are set
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_has_a4(__le16 fc)
|
|
{
|
|
__le16 tmp = cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS);
|
|
return (fc & tmp) == tmp;
|
|
}
|
|
|
|
/**
|
|
* ieee80211_has_morefrags - check if IEEE80211_FCTL_MOREFRAGS is set
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_has_morefrags(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_MOREFRAGS)) != 0;
|
|
}
|
|
|
|
/**
|
|
* ieee80211_has_retry - check if IEEE80211_FCTL_RETRY is set
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_has_retry(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_RETRY)) != 0;
|
|
}
|
|
|
|
/**
|
|
* ieee80211_has_pm - check if IEEE80211_FCTL_PM is set
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_has_pm(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_PM)) != 0;
|
|
}
|
|
|
|
/**
|
|
* ieee80211_has_moredata - check if IEEE80211_FCTL_MOREDATA is set
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_has_moredata(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_MOREDATA)) != 0;
|
|
}
|
|
|
|
/**
|
|
* ieee80211_has_protected - check if IEEE80211_FCTL_PROTECTED is set
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_has_protected(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_PROTECTED)) != 0;
|
|
}
|
|
|
|
/**
|
|
* ieee80211_has_order - check if IEEE80211_FCTL_ORDER is set
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_has_order(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_ORDER)) != 0;
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_mgmt - check if type is IEEE80211_FTYPE_MGMT
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_is_mgmt(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) ==
|
|
cpu_to_le16(IEEE80211_FTYPE_MGMT);
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_ctl - check if type is IEEE80211_FTYPE_CTL
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_is_ctl(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) ==
|
|
cpu_to_le16(IEEE80211_FTYPE_CTL);
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_data - check if type is IEEE80211_FTYPE_DATA
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_is_data(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) ==
|
|
cpu_to_le16(IEEE80211_FTYPE_DATA);
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_data_qos - check if type is IEEE80211_FTYPE_DATA and IEEE80211_STYPE_QOS_DATA is set
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_is_data_qos(__le16 fc)
|
|
{
|
|
/*
|
|
* mask with QOS_DATA rather than IEEE80211_FCTL_STYPE as we just need
|
|
* to check the one bit
|
|
*/
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_STYPE_QOS_DATA)) ==
|
|
cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_DATA);
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_data_present - check if type is IEEE80211_FTYPE_DATA and has data
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_is_data_present(__le16 fc)
|
|
{
|
|
/*
|
|
* mask with 0x40 and test that that bit is clear to only return true
|
|
* for the data-containing substypes.
|
|
*/
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | 0x40)) ==
|
|
cpu_to_le16(IEEE80211_FTYPE_DATA);
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_assoc_req - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ASSOC_REQ
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_is_assoc_req(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
|
|
cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ASSOC_REQ);
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_assoc_resp - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ASSOC_RESP
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_is_assoc_resp(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
|
|
cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ASSOC_RESP);
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_reassoc_req - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_REASSOC_REQ
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_is_reassoc_req(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
|
|
cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_REASSOC_REQ);
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_reassoc_resp - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_REASSOC_RESP
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_is_reassoc_resp(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
|
|
cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_REASSOC_RESP);
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_probe_req - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_PROBE_REQ
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_is_probe_req(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
|
|
cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_REQ);
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_probe_resp - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_PROBE_RESP
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_is_probe_resp(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
|
|
cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_RESP);
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_beacon - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_BEACON
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_is_beacon(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
|
|
cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON);
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_atim - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ATIM
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_is_atim(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
|
|
cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ATIM);
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_disassoc - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_DISASSOC
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_is_disassoc(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
|
|
cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_DISASSOC);
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_auth - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_AUTH
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_is_auth(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
|
|
cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH);
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_deauth - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_DEAUTH
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_is_deauth(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
|
|
cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_DEAUTH);
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_action - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ACTION
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_is_action(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
|
|
cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ACTION);
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_back_req - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_BACK_REQ
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_is_back_req(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
|
|
cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_BACK_REQ);
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_back - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_BACK
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_is_back(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
|
|
cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_BACK);
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_pspoll - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_PSPOLL
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_is_pspoll(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
|
|
cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL);
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_rts - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_RTS
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_is_rts(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
|
|
cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_RTS);
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_cts - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_CTS
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_is_cts(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
|
|
cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTS);
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_ack - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_ACK
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_is_ack(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
|
|
cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_ACK);
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_cfend - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_CFEND
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_is_cfend(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
|
|
cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CFEND);
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_cfendack - check if IEEE80211_FTYPE_CTL && IEEE80211_STYPE_CFENDACK
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_is_cfendack(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
|
|
cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CFENDACK);
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_nullfunc - check if frame is a regular (non-QoS) nullfunc frame
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_is_nullfunc(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
|
|
cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC);
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_qos_nullfunc - check if frame is a QoS nullfunc frame
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_is_qos_nullfunc(__le16 fc)
|
|
{
|
|
return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
|
|
cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_NULLFUNC);
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_any_nullfunc - check if frame is regular or QoS nullfunc frame
|
|
* @fc: frame control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_is_any_nullfunc(__le16 fc)
|
|
{
|
|
return (ieee80211_is_nullfunc(fc) || ieee80211_is_qos_nullfunc(fc));
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_bufferable_mmpdu - check if frame is bufferable MMPDU
|
|
* @fc: frame control field in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_is_bufferable_mmpdu(__le16 fc)
|
|
{
|
|
/* IEEE 802.11-2012, definition of "bufferable management frame";
|
|
* note that this ignores the IBSS special case. */
|
|
return ieee80211_is_mgmt(fc) &&
|
|
(ieee80211_is_action(fc) ||
|
|
ieee80211_is_disassoc(fc) ||
|
|
ieee80211_is_deauth(fc));
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_first_frag - check if IEEE80211_SCTL_FRAG is not set
|
|
* @seq_ctrl: frame sequence control bytes in little-endian byteorder
|
|
*/
|
|
static inline bool ieee80211_is_first_frag(__le16 seq_ctrl)
|
|
{
|
|
return (seq_ctrl & cpu_to_le16(IEEE80211_SCTL_FRAG)) == 0;
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_frag - check if a frame is a fragment
|
|
* @hdr: 802.11 header of the frame
|
|
*/
|
|
static inline bool ieee80211_is_frag(struct ieee80211_hdr *hdr)
|
|
{
|
|
return ieee80211_has_morefrags(hdr->frame_control) ||
|
|
hdr->seq_ctrl & cpu_to_le16(IEEE80211_SCTL_FRAG);
|
|
}
|
|
|
|
struct ieee80211s_hdr {
|
|
u8 flags;
|
|
u8 ttl;
|
|
__le32 seqnum;
|
|
u8 eaddr1[ETH_ALEN];
|
|
u8 eaddr2[ETH_ALEN];
|
|
} __packed __aligned(2);
|
|
|
|
/* Mesh flags */
|
|
#define MESH_FLAGS_AE_A4 0x1
|
|
#define MESH_FLAGS_AE_A5_A6 0x2
|
|
#define MESH_FLAGS_AE 0x3
|
|
#define MESH_FLAGS_PS_DEEP 0x4
|
|
|
|
/**
|
|
* enum ieee80211_preq_flags - mesh PREQ element flags
|
|
*
|
|
* @IEEE80211_PREQ_PROACTIVE_PREP_FLAG: proactive PREP subfield
|
|
*/
|
|
enum ieee80211_preq_flags {
|
|
IEEE80211_PREQ_PROACTIVE_PREP_FLAG = 1<<2,
|
|
};
|
|
|
|
/**
|
|
* enum ieee80211_preq_target_flags - mesh PREQ element per target flags
|
|
*
|
|
* @IEEE80211_PREQ_TO_FLAG: target only subfield
|
|
* @IEEE80211_PREQ_USN_FLAG: unknown target HWMP sequence number subfield
|
|
*/
|
|
enum ieee80211_preq_target_flags {
|
|
IEEE80211_PREQ_TO_FLAG = 1<<0,
|
|
IEEE80211_PREQ_USN_FLAG = 1<<2,
|
|
};
|
|
|
|
/**
|
|
* struct ieee80211_quiet_ie
|
|
*
|
|
* This structure refers to "Quiet information element"
|
|
*/
|
|
struct ieee80211_quiet_ie {
|
|
u8 count;
|
|
u8 period;
|
|
__le16 duration;
|
|
__le16 offset;
|
|
} __packed;
|
|
|
|
/**
|
|
* struct ieee80211_msrment_ie
|
|
*
|
|
* This structure refers to "Measurement Request/Report information element"
|
|
*/
|
|
struct ieee80211_msrment_ie {
|
|
u8 token;
|
|
u8 mode;
|
|
u8 type;
|
|
u8 request[0];
|
|
} __packed;
|
|
|
|
/**
|
|
* struct ieee80211_channel_sw_ie
|
|
*
|
|
* This structure refers to "Channel Switch Announcement information element"
|
|
*/
|
|
struct ieee80211_channel_sw_ie {
|
|
u8 mode;
|
|
u8 new_ch_num;
|
|
u8 count;
|
|
} __packed;
|
|
|
|
/**
|
|
* struct ieee80211_ext_chansw_ie
|
|
*
|
|
* This structure represents the "Extended Channel Switch Announcement element"
|
|
*/
|
|
struct ieee80211_ext_chansw_ie {
|
|
u8 mode;
|
|
u8 new_operating_class;
|
|
u8 new_ch_num;
|
|
u8 count;
|
|
} __packed;
|
|
|
|
/**
|
|
* struct ieee80211_sec_chan_offs_ie - secondary channel offset IE
|
|
* @sec_chan_offs: secondary channel offset, uses IEEE80211_HT_PARAM_CHA_SEC_*
|
|
* values here
|
|
* This structure represents the "Secondary Channel Offset element"
|
|
*/
|
|
struct ieee80211_sec_chan_offs_ie {
|
|
u8 sec_chan_offs;
|
|
} __packed;
|
|
|
|
/**
|
|
* struct ieee80211_mesh_chansw_params_ie - mesh channel switch parameters IE
|
|
*
|
|
* This structure represents the "Mesh Channel Switch Paramters element"
|
|
*/
|
|
struct ieee80211_mesh_chansw_params_ie {
|
|
u8 mesh_ttl;
|
|
u8 mesh_flags;
|
|
__le16 mesh_reason;
|
|
__le16 mesh_pre_value;
|
|
} __packed;
|
|
|
|
/**
|
|
* struct ieee80211_wide_bw_chansw_ie - wide bandwidth channel switch IE
|
|
*/
|
|
struct ieee80211_wide_bw_chansw_ie {
|
|
u8 new_channel_width;
|
|
u8 new_center_freq_seg0, new_center_freq_seg1;
|
|
} __packed;
|
|
|
|
/**
|
|
* struct ieee80211_tim
|
|
*
|
|
* This structure refers to "Traffic Indication Map information element"
|
|
*/
|
|
struct ieee80211_tim_ie {
|
|
u8 dtim_count;
|
|
u8 dtim_period;
|
|
u8 bitmap_ctrl;
|
|
/* variable size: 1 - 251 bytes */
|
|
u8 virtual_map[1];
|
|
} __packed;
|
|
|
|
/**
|
|
* struct ieee80211_meshconf_ie
|
|
*
|
|
* This structure refers to "Mesh Configuration information element"
|
|
*/
|
|
struct ieee80211_meshconf_ie {
|
|
u8 meshconf_psel;
|
|
u8 meshconf_pmetric;
|
|
u8 meshconf_congest;
|
|
u8 meshconf_synch;
|
|
u8 meshconf_auth;
|
|
u8 meshconf_form;
|
|
u8 meshconf_cap;
|
|
} __packed;
|
|
|
|
/**
|
|
* enum mesh_config_capab_flags - Mesh Configuration IE capability field flags
|
|
*
|
|
* @IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS: STA is willing to establish
|
|
* additional mesh peerings with other mesh STAs
|
|
* @IEEE80211_MESHCONF_CAPAB_FORWARDING: the STA forwards MSDUs
|
|
* @IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING: TBTT adjustment procedure
|
|
* is ongoing
|
|
* @IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL: STA is in deep sleep mode or has
|
|
* neighbors in deep sleep mode
|
|
*/
|
|
enum mesh_config_capab_flags {
|
|
IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS = 0x01,
|
|
IEEE80211_MESHCONF_CAPAB_FORWARDING = 0x08,
|
|
IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING = 0x20,
|
|
IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL = 0x40,
|
|
};
|
|
|
|
/**
|
|
* mesh channel switch parameters element's flag indicator
|
|
*
|
|
*/
|
|
#define WLAN_EID_CHAN_SWITCH_PARAM_TX_RESTRICT BIT(0)
|
|
#define WLAN_EID_CHAN_SWITCH_PARAM_INITIATOR BIT(1)
|
|
#define WLAN_EID_CHAN_SWITCH_PARAM_REASON BIT(2)
|
|
|
|
/**
|
|
* struct ieee80211_rann_ie
|
|
*
|
|
* This structure refers to "Root Announcement information element"
|
|
*/
|
|
struct ieee80211_rann_ie {
|
|
u8 rann_flags;
|
|
u8 rann_hopcount;
|
|
u8 rann_ttl;
|
|
u8 rann_addr[ETH_ALEN];
|
|
__le32 rann_seq;
|
|
__le32 rann_interval;
|
|
__le32 rann_metric;
|
|
} __packed;
|
|
|
|
enum ieee80211_rann_flags {
|
|
RANN_FLAG_IS_GATE = 1 << 0,
|
|
};
|
|
|
|
enum ieee80211_ht_chanwidth_values {
|
|
IEEE80211_HT_CHANWIDTH_20MHZ = 0,
|
|
IEEE80211_HT_CHANWIDTH_ANY = 1,
|
|
};
|
|
|
|
/**
|
|
* enum ieee80211_opmode_bits - VHT operating mode field bits
|
|
* @IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK: channel width mask
|
|
* @IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ: 20 MHz channel width
|
|
* @IEEE80211_OPMODE_NOTIF_CHANWIDTH_40MHZ: 40 MHz channel width
|
|
* @IEEE80211_OPMODE_NOTIF_CHANWIDTH_80MHZ: 80 MHz channel width
|
|
* @IEEE80211_OPMODE_NOTIF_CHANWIDTH_160MHZ: 160 MHz or 80+80 MHz channel width
|
|
* @IEEE80211_OPMODE_NOTIF_RX_NSS_MASK: number of spatial streams mask
|
|
* (the NSS value is the value of this field + 1)
|
|
* @IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT: number of spatial streams shift
|
|
* @IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF: indicates streams in SU-MIMO PPDU
|
|
* using a beamforming steering matrix
|
|
*/
|
|
enum ieee80211_vht_opmode_bits {
|
|
IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK = 3,
|
|
IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ = 0,
|
|
IEEE80211_OPMODE_NOTIF_CHANWIDTH_40MHZ = 1,
|
|
IEEE80211_OPMODE_NOTIF_CHANWIDTH_80MHZ = 2,
|
|
IEEE80211_OPMODE_NOTIF_CHANWIDTH_160MHZ = 3,
|
|
IEEE80211_OPMODE_NOTIF_RX_NSS_MASK = 0x70,
|
|
IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT = 4,
|
|
IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF = 0x80,
|
|
};
|
|
|
|
#define WLAN_SA_QUERY_TR_ID_LEN 2
|
|
#define WLAN_MEMBERSHIP_LEN 8
|
|
#define WLAN_USER_POSITION_LEN 16
|
|
|
|
/**
|
|
* struct ieee80211_tpc_report_ie
|
|
*
|
|
* This structure refers to "TPC Report element"
|
|
*/
|
|
struct ieee80211_tpc_report_ie {
|
|
u8 tx_power;
|
|
u8 link_margin;
|
|
} __packed;
|
|
|
|
struct ieee80211_mgmt {
|
|
__le16 frame_control;
|
|
__le16 duration;
|
|
u8 da[ETH_ALEN];
|
|
u8 sa[ETH_ALEN];
|
|
u8 bssid[ETH_ALEN];
|
|
__le16 seq_ctrl;
|
|
union {
|
|
struct {
|
|
__le16 auth_alg;
|
|
__le16 auth_transaction;
|
|
__le16 status_code;
|
|
/* possibly followed by Challenge text */
|
|
u8 variable[0];
|
|
} __packed auth;
|
|
struct {
|
|
__le16 reason_code;
|
|
} __packed deauth;
|
|
struct {
|
|
__le16 capab_info;
|
|
__le16 listen_interval;
|
|
/* followed by SSID and Supported rates */
|
|
u8 variable[0];
|
|
} __packed assoc_req;
|
|
struct {
|
|
__le16 capab_info;
|
|
__le16 status_code;
|
|
__le16 aid;
|
|
/* followed by Supported rates */
|
|
u8 variable[0];
|
|
} __packed assoc_resp, reassoc_resp;
|
|
struct {
|
|
__le16 capab_info;
|
|
__le16 listen_interval;
|
|
u8 current_ap[ETH_ALEN];
|
|
/* followed by SSID and Supported rates */
|
|
u8 variable[0];
|
|
} __packed reassoc_req;
|
|
struct {
|
|
__le16 reason_code;
|
|
} __packed disassoc;
|
|
struct {
|
|
__le64 timestamp;
|
|
__le16 beacon_int;
|
|
__le16 capab_info;
|
|
/* followed by some of SSID, Supported rates,
|
|
* FH Params, DS Params, CF Params, IBSS Params, TIM */
|
|
u8 variable[0];
|
|
} __packed beacon;
|
|
struct {
|
|
/* only variable items: SSID, Supported rates */
|
|
u8 variable[0];
|
|
} __packed probe_req;
|
|
struct {
|
|
__le64 timestamp;
|
|
__le16 beacon_int;
|
|
__le16 capab_info;
|
|
/* followed by some of SSID, Supported rates,
|
|
* FH Params, DS Params, CF Params, IBSS Params */
|
|
u8 variable[];
|
|
} __packed probe_resp;
|
|
struct {
|
|
u8 category;
|
|
union {
|
|
struct {
|
|
u8 action_code;
|
|
u8 dialog_token;
|
|
u8 status_code;
|
|
u8 variable[0];
|
|
} __packed wme_action;
|
|
struct{
|
|
u8 action_code;
|
|
u8 variable[0];
|
|
} __packed chan_switch;
|
|
struct{
|
|
u8 action_code;
|
|
struct ieee80211_ext_chansw_ie data;
|
|
u8 variable[0];
|
|
} __packed ext_chan_switch;
|
|
struct{
|
|
u8 action_code;
|
|
u8 dialog_token;
|
|
u8 element_id;
|
|
u8 length;
|
|
struct ieee80211_msrment_ie msr_elem;
|
|
} __packed measurement;
|
|
struct{
|
|
u8 action_code;
|
|
u8 dialog_token;
|
|
__le16 capab;
|
|
__le16 timeout;
|
|
__le16 start_seq_num;
|
|
} __packed addba_req;
|
|
struct{
|
|
u8 action_code;
|
|
u8 dialog_token;
|
|
__le16 status;
|
|
__le16 capab;
|
|
__le16 timeout;
|
|
} __packed addba_resp;
|
|
struct{
|
|
u8 action_code;
|
|
__le16 params;
|
|
__le16 reason_code;
|
|
} __packed delba;
|
|
struct {
|
|
u8 action_code;
|
|
u8 variable[0];
|
|
} __packed self_prot;
|
|
struct{
|
|
u8 action_code;
|
|
u8 variable[0];
|
|
} __packed mesh_action;
|
|
struct {
|
|
u8 action;
|
|
u8 trans_id[WLAN_SA_QUERY_TR_ID_LEN];
|
|
} __packed sa_query;
|
|
struct {
|
|
u8 action;
|
|
u8 smps_control;
|
|
} __packed ht_smps;
|
|
struct {
|
|
u8 action_code;
|
|
u8 chanwidth;
|
|
} __packed ht_notify_cw;
|
|
struct {
|
|
u8 action_code;
|
|
u8 dialog_token;
|
|
__le16 capability;
|
|
u8 variable[0];
|
|
} __packed tdls_discover_resp;
|
|
struct {
|
|
u8 action_code;
|
|
u8 operating_mode;
|
|
} __packed vht_opmode_notif;
|
|
struct {
|
|
u8 action_code;
|
|
u8 membership[WLAN_MEMBERSHIP_LEN];
|
|
u8 position[WLAN_USER_POSITION_LEN];
|
|
} __packed vht_group_notif;
|
|
struct {
|
|
u8 action_code;
|
|
u8 dialog_token;
|
|
u8 tpc_elem_id;
|
|
u8 tpc_elem_length;
|
|
struct ieee80211_tpc_report_ie tpc;
|
|
} __packed tpc_report;
|
|
struct {
|
|
u8 action_code;
|
|
u8 dialog_token;
|
|
u8 follow_up;
|
|
u8 tod[6];
|
|
u8 toa[6];
|
|
__le16 tod_error;
|
|
__le16 toa_error;
|
|
u8 variable[0];
|
|
} __packed ftm;
|
|
} u;
|
|
} __packed action;
|
|
} u;
|
|
} __packed __aligned(2);
|
|
|
|
/* Supported rates membership selectors */
|
|
#define BSS_MEMBERSHIP_SELECTOR_HT_PHY 127
|
|
#define BSS_MEMBERSHIP_SELECTOR_VHT_PHY 126
|
|
|
|
/* mgmt header + 1 byte category code */
|
|
#define IEEE80211_MIN_ACTION_SIZE offsetof(struct ieee80211_mgmt, u.action.u)
|
|
|
|
|
|
/* Management MIC information element (IEEE 802.11w) */
|
|
struct ieee80211_mmie {
|
|
u8 element_id;
|
|
u8 length;
|
|
__le16 key_id;
|
|
u8 sequence_number[6];
|
|
u8 mic[8];
|
|
} __packed;
|
|
|
|
/* Management MIC information element (IEEE 802.11w) for GMAC and CMAC-256 */
|
|
struct ieee80211_mmie_16 {
|
|
u8 element_id;
|
|
u8 length;
|
|
__le16 key_id;
|
|
u8 sequence_number[6];
|
|
u8 mic[16];
|
|
} __packed;
|
|
|
|
struct ieee80211_vendor_ie {
|
|
u8 element_id;
|
|
u8 len;
|
|
u8 oui[3];
|
|
u8 oui_type;
|
|
} __packed;
|
|
|
|
struct ieee80211_wmm_ac_param {
|
|
u8 aci_aifsn; /* AIFSN, ACM, ACI */
|
|
u8 cw; /* ECWmin, ECWmax (CW = 2^ECW - 1) */
|
|
__le16 txop_limit;
|
|
} __packed;
|
|
|
|
struct ieee80211_wmm_param_ie {
|
|
u8 element_id; /* Element ID: 221 (0xdd); */
|
|
u8 len; /* Length: 24 */
|
|
/* required fields for WMM version 1 */
|
|
u8 oui[3]; /* 00:50:f2 */
|
|
u8 oui_type; /* 2 */
|
|
u8 oui_subtype; /* 1 */
|
|
u8 version; /* 1 for WMM version 1.0 */
|
|
u8 qos_info; /* AP/STA specific QoS info */
|
|
u8 reserved; /* 0 */
|
|
/* AC_BE, AC_BK, AC_VI, AC_VO */
|
|
struct ieee80211_wmm_ac_param ac[4];
|
|
} __packed;
|
|
|
|
/* Control frames */
|
|
struct ieee80211_rts {
|
|
__le16 frame_control;
|
|
__le16 duration;
|
|
u8 ra[ETH_ALEN];
|
|
u8 ta[ETH_ALEN];
|
|
} __packed __aligned(2);
|
|
|
|
struct ieee80211_cts {
|
|
__le16 frame_control;
|
|
__le16 duration;
|
|
u8 ra[ETH_ALEN];
|
|
} __packed __aligned(2);
|
|
|
|
struct ieee80211_pspoll {
|
|
__le16 frame_control;
|
|
__le16 aid;
|
|
u8 bssid[ETH_ALEN];
|
|
u8 ta[ETH_ALEN];
|
|
} __packed __aligned(2);
|
|
|
|
/* TDLS */
|
|
|
|
/* Channel switch timing */
|
|
struct ieee80211_ch_switch_timing {
|
|
__le16 switch_time;
|
|
__le16 switch_timeout;
|
|
} __packed;
|
|
|
|
/* Link-id information element */
|
|
struct ieee80211_tdls_lnkie {
|
|
u8 ie_type; /* Link Identifier IE */
|
|
u8 ie_len;
|
|
u8 bssid[ETH_ALEN];
|
|
u8 init_sta[ETH_ALEN];
|
|
u8 resp_sta[ETH_ALEN];
|
|
} __packed;
|
|
|
|
struct ieee80211_tdls_data {
|
|
u8 da[ETH_ALEN];
|
|
u8 sa[ETH_ALEN];
|
|
__be16 ether_type;
|
|
u8 payload_type;
|
|
u8 category;
|
|
u8 action_code;
|
|
union {
|
|
struct {
|
|
u8 dialog_token;
|
|
__le16 capability;
|
|
u8 variable[0];
|
|
} __packed setup_req;
|
|
struct {
|
|
__le16 status_code;
|
|
u8 dialog_token;
|
|
__le16 capability;
|
|
u8 variable[0];
|
|
} __packed setup_resp;
|
|
struct {
|
|
__le16 status_code;
|
|
u8 dialog_token;
|
|
u8 variable[0];
|
|
} __packed setup_cfm;
|
|
struct {
|
|
__le16 reason_code;
|
|
u8 variable[0];
|
|
} __packed teardown;
|
|
struct {
|
|
u8 dialog_token;
|
|
u8 variable[0];
|
|
} __packed discover_req;
|
|
struct {
|
|
u8 target_channel;
|
|
u8 oper_class;
|
|
u8 variable[0];
|
|
} __packed chan_switch_req;
|
|
struct {
|
|
__le16 status_code;
|
|
u8 variable[0];
|
|
} __packed chan_switch_resp;
|
|
} u;
|
|
} __packed;
|
|
|
|
/*
|
|
* Peer-to-Peer IE attribute related definitions.
|
|
*/
|
|
/**
|
|
* enum ieee80211_p2p_attr_id - identifies type of peer-to-peer attribute.
|
|
*/
|
|
enum ieee80211_p2p_attr_id {
|
|
IEEE80211_P2P_ATTR_STATUS = 0,
|
|
IEEE80211_P2P_ATTR_MINOR_REASON,
|
|
IEEE80211_P2P_ATTR_CAPABILITY,
|
|
IEEE80211_P2P_ATTR_DEVICE_ID,
|
|
IEEE80211_P2P_ATTR_GO_INTENT,
|
|
IEEE80211_P2P_ATTR_GO_CONFIG_TIMEOUT,
|
|
IEEE80211_P2P_ATTR_LISTEN_CHANNEL,
|
|
IEEE80211_P2P_ATTR_GROUP_BSSID,
|
|
IEEE80211_P2P_ATTR_EXT_LISTEN_TIMING,
|
|
IEEE80211_P2P_ATTR_INTENDED_IFACE_ADDR,
|
|
IEEE80211_P2P_ATTR_MANAGABILITY,
|
|
IEEE80211_P2P_ATTR_CHANNEL_LIST,
|
|
IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
|
|
IEEE80211_P2P_ATTR_DEVICE_INFO,
|
|
IEEE80211_P2P_ATTR_GROUP_INFO,
|
|
IEEE80211_P2P_ATTR_GROUP_ID,
|
|
IEEE80211_P2P_ATTR_INTERFACE,
|
|
IEEE80211_P2P_ATTR_OPER_CHANNEL,
|
|
IEEE80211_P2P_ATTR_INVITE_FLAGS,
|
|
/* 19 - 220: Reserved */
|
|
IEEE80211_P2P_ATTR_VENDOR_SPECIFIC = 221,
|
|
|
|
IEEE80211_P2P_ATTR_MAX
|
|
};
|
|
|
|
/* Notice of Absence attribute - described in P2P spec 4.1.14 */
|
|
/* Typical max value used here */
|
|
#define IEEE80211_P2P_NOA_DESC_MAX 4
|
|
|
|
struct ieee80211_p2p_noa_desc {
|
|
u8 count;
|
|
__le32 duration;
|
|
__le32 interval;
|
|
__le32 start_time;
|
|
} __packed;
|
|
|
|
struct ieee80211_p2p_noa_attr {
|
|
u8 index;
|
|
u8 oppps_ctwindow;
|
|
struct ieee80211_p2p_noa_desc desc[IEEE80211_P2P_NOA_DESC_MAX];
|
|
} __packed;
|
|
|
|
#define IEEE80211_P2P_OPPPS_ENABLE_BIT BIT(7)
|
|
#define IEEE80211_P2P_OPPPS_CTWINDOW_MASK 0x7F
|
|
|
|
/**
|
|
* struct ieee80211_bar - HT Block Ack Request
|
|
*
|
|
* This structure refers to "HT BlockAckReq" as
|
|
* described in 802.11n draft section 7.2.1.7.1
|
|
*/
|
|
struct ieee80211_bar {
|
|
__le16 frame_control;
|
|
__le16 duration;
|
|
__u8 ra[ETH_ALEN];
|
|
__u8 ta[ETH_ALEN];
|
|
__le16 control;
|
|
__le16 start_seq_num;
|
|
} __packed;
|
|
|
|
/* 802.11 BAR control masks */
|
|
#define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL 0x0000
|
|
#define IEEE80211_BAR_CTRL_MULTI_TID 0x0002
|
|
#define IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA 0x0004
|
|
#define IEEE80211_BAR_CTRL_TID_INFO_MASK 0xf000
|
|
#define IEEE80211_BAR_CTRL_TID_INFO_SHIFT 12
|
|
|
|
#define IEEE80211_HT_MCS_MASK_LEN 10
|
|
|
|
/**
|
|
* struct ieee80211_mcs_info - MCS information
|
|
* @rx_mask: RX mask
|
|
* @rx_highest: highest supported RX rate. If set represents
|
|
* the highest supported RX data rate in units of 1 Mbps.
|
|
* If this field is 0 this value should not be used to
|
|
* consider the highest RX data rate supported.
|
|
* @tx_params: TX parameters
|
|
*/
|
|
struct ieee80211_mcs_info {
|
|
u8 rx_mask[IEEE80211_HT_MCS_MASK_LEN];
|
|
__le16 rx_highest;
|
|
u8 tx_params;
|
|
u8 reserved[3];
|
|
} __packed;
|
|
|
|
/* 802.11n HT capability MSC set */
|
|
#define IEEE80211_HT_MCS_RX_HIGHEST_MASK 0x3ff
|
|
#define IEEE80211_HT_MCS_TX_DEFINED 0x01
|
|
#define IEEE80211_HT_MCS_TX_RX_DIFF 0x02
|
|
/* value 0 == 1 stream etc */
|
|
#define IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK 0x0C
|
|
#define IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT 2
|
|
#define IEEE80211_HT_MCS_TX_MAX_STREAMS 4
|
|
#define IEEE80211_HT_MCS_TX_UNEQUAL_MODULATION 0x10
|
|
|
|
/*
|
|
* 802.11n D5.0 20.3.5 / 20.6 says:
|
|
* - indices 0 to 7 and 32 are single spatial stream
|
|
* - 8 to 31 are multiple spatial streams using equal modulation
|
|
* [8..15 for two streams, 16..23 for three and 24..31 for four]
|
|
* - remainder are multiple spatial streams using unequal modulation
|
|
*/
|
|
#define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START 33
|
|
#define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START_BYTE \
|
|
(IEEE80211_HT_MCS_UNEQUAL_MODULATION_START / 8)
|
|
|
|
/**
|
|
* struct ieee80211_ht_cap - HT capabilities
|
|
*
|
|
* This structure is the "HT capabilities element" as
|
|
* described in 802.11n D5.0 7.3.2.57
|
|
*/
|
|
struct ieee80211_ht_cap {
|
|
__le16 cap_info;
|
|
u8 ampdu_params_info;
|
|
|
|
/* 16 bytes MCS information */
|
|
struct ieee80211_mcs_info mcs;
|
|
|
|
__le16 extended_ht_cap_info;
|
|
__le32 tx_BF_cap_info;
|
|
u8 antenna_selection_info;
|
|
} __packed;
|
|
|
|
/* 802.11n HT capabilities masks (for cap_info) */
|
|
#define IEEE80211_HT_CAP_LDPC_CODING 0x0001
|
|
#define IEEE80211_HT_CAP_SUP_WIDTH_20_40 0x0002
|
|
#define IEEE80211_HT_CAP_SM_PS 0x000C
|
|
#define IEEE80211_HT_CAP_SM_PS_SHIFT 2
|
|
#define IEEE80211_HT_CAP_GRN_FLD 0x0010
|
|
#define IEEE80211_HT_CAP_SGI_20 0x0020
|
|
#define IEEE80211_HT_CAP_SGI_40 0x0040
|
|
#define IEEE80211_HT_CAP_TX_STBC 0x0080
|
|
#define IEEE80211_HT_CAP_RX_STBC 0x0300
|
|
#define IEEE80211_HT_CAP_RX_STBC_SHIFT 8
|
|
#define IEEE80211_HT_CAP_DELAY_BA 0x0400
|
|
#define IEEE80211_HT_CAP_MAX_AMSDU 0x0800
|
|
#define IEEE80211_HT_CAP_DSSSCCK40 0x1000
|
|
#define IEEE80211_HT_CAP_RESERVED 0x2000
|
|
#define IEEE80211_HT_CAP_40MHZ_INTOLERANT 0x4000
|
|
#define IEEE80211_HT_CAP_LSIG_TXOP_PROT 0x8000
|
|
|
|
/* 802.11n HT extended capabilities masks (for extended_ht_cap_info) */
|
|
#define IEEE80211_HT_EXT_CAP_PCO 0x0001
|
|
#define IEEE80211_HT_EXT_CAP_PCO_TIME 0x0006
|
|
#define IEEE80211_HT_EXT_CAP_PCO_TIME_SHIFT 1
|
|
#define IEEE80211_HT_EXT_CAP_MCS_FB 0x0300
|
|
#define IEEE80211_HT_EXT_CAP_MCS_FB_SHIFT 8
|
|
#define IEEE80211_HT_EXT_CAP_HTC_SUP 0x0400
|
|
#define IEEE80211_HT_EXT_CAP_RD_RESPONDER 0x0800
|
|
|
|
/* 802.11n HT capability AMPDU settings (for ampdu_params_info) */
|
|
#define IEEE80211_HT_AMPDU_PARM_FACTOR 0x03
|
|
#define IEEE80211_HT_AMPDU_PARM_DENSITY 0x1C
|
|
#define IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT 2
|
|
|
|
/*
|
|
* Maximum length of AMPDU that the STA can receive in high-throughput (HT).
|
|
* Length = 2 ^ (13 + max_ampdu_length_exp) - 1 (octets)
|
|
*/
|
|
enum ieee80211_max_ampdu_length_exp {
|
|
IEEE80211_HT_MAX_AMPDU_8K = 0,
|
|
IEEE80211_HT_MAX_AMPDU_16K = 1,
|
|
IEEE80211_HT_MAX_AMPDU_32K = 2,
|
|
IEEE80211_HT_MAX_AMPDU_64K = 3
|
|
};
|
|
|
|
/*
|
|
* Maximum length of AMPDU that the STA can receive in VHT.
|
|
* Length = 2 ^ (13 + max_ampdu_length_exp) - 1 (octets)
|
|
*/
|
|
enum ieee80211_vht_max_ampdu_length_exp {
|
|
IEEE80211_VHT_MAX_AMPDU_8K = 0,
|
|
IEEE80211_VHT_MAX_AMPDU_16K = 1,
|
|
IEEE80211_VHT_MAX_AMPDU_32K = 2,
|
|
IEEE80211_VHT_MAX_AMPDU_64K = 3,
|
|
IEEE80211_VHT_MAX_AMPDU_128K = 4,
|
|
IEEE80211_VHT_MAX_AMPDU_256K = 5,
|
|
IEEE80211_VHT_MAX_AMPDU_512K = 6,
|
|
IEEE80211_VHT_MAX_AMPDU_1024K = 7
|
|
};
|
|
|
|
#define IEEE80211_HT_MAX_AMPDU_FACTOR 13
|
|
|
|
/* Minimum MPDU start spacing */
|
|
enum ieee80211_min_mpdu_spacing {
|
|
IEEE80211_HT_MPDU_DENSITY_NONE = 0, /* No restriction */
|
|
IEEE80211_HT_MPDU_DENSITY_0_25 = 1, /* 1/4 usec */
|
|
IEEE80211_HT_MPDU_DENSITY_0_5 = 2, /* 1/2 usec */
|
|
IEEE80211_HT_MPDU_DENSITY_1 = 3, /* 1 usec */
|
|
IEEE80211_HT_MPDU_DENSITY_2 = 4, /* 2 usec */
|
|
IEEE80211_HT_MPDU_DENSITY_4 = 5, /* 4 usec */
|
|
IEEE80211_HT_MPDU_DENSITY_8 = 6, /* 8 usec */
|
|
IEEE80211_HT_MPDU_DENSITY_16 = 7 /* 16 usec */
|
|
};
|
|
|
|
/**
|
|
* struct ieee80211_ht_operation - HT operation IE
|
|
*
|
|
* This structure is the "HT operation element" as
|
|
* described in 802.11n-2009 7.3.2.57
|
|
*/
|
|
struct ieee80211_ht_operation {
|
|
u8 primary_chan;
|
|
u8 ht_param;
|
|
__le16 operation_mode;
|
|
__le16 stbc_param;
|
|
u8 basic_set[16];
|
|
} __packed;
|
|
|
|
/* for ht_param */
|
|
#define IEEE80211_HT_PARAM_CHA_SEC_OFFSET 0x03
|
|
#define IEEE80211_HT_PARAM_CHA_SEC_NONE 0x00
|
|
#define IEEE80211_HT_PARAM_CHA_SEC_ABOVE 0x01
|
|
#define IEEE80211_HT_PARAM_CHA_SEC_BELOW 0x03
|
|
#define IEEE80211_HT_PARAM_CHAN_WIDTH_ANY 0x04
|
|
#define IEEE80211_HT_PARAM_RIFS_MODE 0x08
|
|
|
|
/* for operation_mode */
|
|
#define IEEE80211_HT_OP_MODE_PROTECTION 0x0003
|
|
#define IEEE80211_HT_OP_MODE_PROTECTION_NONE 0
|
|
#define IEEE80211_HT_OP_MODE_PROTECTION_NONMEMBER 1
|
|
#define IEEE80211_HT_OP_MODE_PROTECTION_20MHZ 2
|
|
#define IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED 3
|
|
#define IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT 0x0004
|
|
#define IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT 0x0010
|
|
#define IEEE80211_HT_OP_MODE_CCFS2_SHIFT 5
|
|
#define IEEE80211_HT_OP_MODE_CCFS2_MASK 0x1fe0
|
|
|
|
/* for stbc_param */
|
|
#define IEEE80211_HT_STBC_PARAM_DUAL_BEACON 0x0040
|
|
#define IEEE80211_HT_STBC_PARAM_DUAL_CTS_PROT 0x0080
|
|
#define IEEE80211_HT_STBC_PARAM_STBC_BEACON 0x0100
|
|
#define IEEE80211_HT_STBC_PARAM_LSIG_TXOP_FULLPROT 0x0200
|
|
#define IEEE80211_HT_STBC_PARAM_PCO_ACTIVE 0x0400
|
|
#define IEEE80211_HT_STBC_PARAM_PCO_PHASE 0x0800
|
|
|
|
|
|
/* block-ack parameters */
|
|
#define IEEE80211_ADDBA_PARAM_AMSDU_MASK 0x0001
|
|
#define IEEE80211_ADDBA_PARAM_POLICY_MASK 0x0002
|
|
#define IEEE80211_ADDBA_PARAM_TID_MASK 0x003C
|
|
#define IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK 0xFFC0
|
|
#define IEEE80211_DELBA_PARAM_TID_MASK 0xF000
|
|
#define IEEE80211_DELBA_PARAM_INITIATOR_MASK 0x0800
|
|
|
|
/*
|
|
* A-PMDU buffer sizes
|
|
* According to IEEE802.11n spec size varies from 8K to 64K (in powers of 2)
|
|
*/
|
|
#define IEEE80211_MIN_AMPDU_BUF 0x8
|
|
#define IEEE80211_MAX_AMPDU_BUF 0x40
|
|
|
|
|
|
/* Spatial Multiplexing Power Save Modes (for capability) */
|
|
#define WLAN_HT_CAP_SM_PS_STATIC 0
|
|
#define WLAN_HT_CAP_SM_PS_DYNAMIC 1
|
|
#define WLAN_HT_CAP_SM_PS_INVALID 2
|
|
#define WLAN_HT_CAP_SM_PS_DISABLED 3
|
|
|
|
/* for SM power control field lower two bits */
|
|
#define WLAN_HT_SMPS_CONTROL_DISABLED 0
|
|
#define WLAN_HT_SMPS_CONTROL_STATIC 1
|
|
#define WLAN_HT_SMPS_CONTROL_DYNAMIC 3
|
|
|
|
/**
|
|
* struct ieee80211_vht_mcs_info - VHT MCS information
|
|
* @rx_mcs_map: RX MCS map 2 bits for each stream, total 8 streams
|
|
* @rx_highest: Indicates highest long GI VHT PPDU data rate
|
|
* STA can receive. Rate expressed in units of 1 Mbps.
|
|
* If this field is 0 this value should not be used to
|
|
* consider the highest RX data rate supported.
|
|
* The top 3 bits of this field are reserved.
|
|
* @tx_mcs_map: TX MCS map 2 bits for each stream, total 8 streams
|
|
* @tx_highest: Indicates highest long GI VHT PPDU data rate
|
|
* STA can transmit. Rate expressed in units of 1 Mbps.
|
|
* If this field is 0 this value should not be used to
|
|
* consider the highest TX data rate supported.
|
|
* The top 3 bits of this field are reserved.
|
|
*/
|
|
struct ieee80211_vht_mcs_info {
|
|
__le16 rx_mcs_map;
|
|
__le16 rx_highest;
|
|
__le16 tx_mcs_map;
|
|
__le16 tx_highest;
|
|
} __packed;
|
|
|
|
/**
|
|
* enum ieee80211_vht_mcs_support - VHT MCS support definitions
|
|
* @IEEE80211_VHT_MCS_SUPPORT_0_7: MCSes 0-7 are supported for the
|
|
* number of streams
|
|
* @IEEE80211_VHT_MCS_SUPPORT_0_8: MCSes 0-8 are supported
|
|
* @IEEE80211_VHT_MCS_SUPPORT_0_9: MCSes 0-9 are supported
|
|
* @IEEE80211_VHT_MCS_NOT_SUPPORTED: This number of streams isn't supported
|
|
*
|
|
* These definitions are used in each 2-bit subfield of the @rx_mcs_map
|
|
* and @tx_mcs_map fields of &struct ieee80211_vht_mcs_info, which are
|
|
* both split into 8 subfields by number of streams. These values indicate
|
|
* which MCSes are supported for the number of streams the value appears
|
|
* for.
|
|
*/
|
|
enum ieee80211_vht_mcs_support {
|
|
IEEE80211_VHT_MCS_SUPPORT_0_7 = 0,
|
|
IEEE80211_VHT_MCS_SUPPORT_0_8 = 1,
|
|
IEEE80211_VHT_MCS_SUPPORT_0_9 = 2,
|
|
IEEE80211_VHT_MCS_NOT_SUPPORTED = 3,
|
|
};
|
|
|
|
/**
|
|
* struct ieee80211_vht_cap - VHT capabilities
|
|
*
|
|
* This structure is the "VHT capabilities element" as
|
|
* described in 802.11ac D3.0 8.4.2.160
|
|
* @vht_cap_info: VHT capability info
|
|
* @supp_mcs: VHT MCS supported rates
|
|
*/
|
|
struct ieee80211_vht_cap {
|
|
__le32 vht_cap_info;
|
|
struct ieee80211_vht_mcs_info supp_mcs;
|
|
} __packed;
|
|
|
|
/**
|
|
* enum ieee80211_vht_chanwidth - VHT channel width
|
|
* @IEEE80211_VHT_CHANWIDTH_USE_HT: use the HT operation IE to
|
|
* determine the channel width (20 or 40 MHz)
|
|
* @IEEE80211_VHT_CHANWIDTH_80MHZ: 80 MHz bandwidth
|
|
* @IEEE80211_VHT_CHANWIDTH_160MHZ: 160 MHz bandwidth
|
|
* @IEEE80211_VHT_CHANWIDTH_80P80MHZ: 80+80 MHz bandwidth
|
|
*/
|
|
enum ieee80211_vht_chanwidth {
|
|
IEEE80211_VHT_CHANWIDTH_USE_HT = 0,
|
|
IEEE80211_VHT_CHANWIDTH_80MHZ = 1,
|
|
IEEE80211_VHT_CHANWIDTH_160MHZ = 2,
|
|
IEEE80211_VHT_CHANWIDTH_80P80MHZ = 3,
|
|
};
|
|
|
|
/**
|
|
* struct ieee80211_vht_operation - VHT operation IE
|
|
*
|
|
* This structure is the "VHT operation element" as
|
|
* described in 802.11ac D3.0 8.4.2.161
|
|
* @chan_width: Operating channel width
|
|
* @center_freq_seg0_idx: center freq segment 0 index
|
|
* @center_freq_seg1_idx: center freq segment 1 index
|
|
* @basic_mcs_set: VHT Basic MCS rate set
|
|
*/
|
|
struct ieee80211_vht_operation {
|
|
u8 chan_width;
|
|
u8 center_freq_seg0_idx;
|
|
u8 center_freq_seg1_idx;
|
|
__le16 basic_mcs_set;
|
|
} __packed;
|
|
|
|
/**
|
|
* struct ieee80211_he_cap_elem - HE capabilities element
|
|
*
|
|
* This structure is the "HE capabilities element" fixed fields as
|
|
* described in P802.11ax_D2.0 section 9.4.2.237.2 and 9.4.2.237.3
|
|
*/
|
|
struct ieee80211_he_cap_elem {
|
|
u8 mac_cap_info[5];
|
|
u8 phy_cap_info[9];
|
|
} __packed;
|
|
|
|
#define IEEE80211_TX_RX_MCS_NSS_DESC_MAX_LEN 5
|
|
|
|
/**
|
|
* enum ieee80211_he_mcs_support - HE MCS support definitions
|
|
* @IEEE80211_HE_MCS_SUPPORT_0_7: MCSes 0-7 are supported for the
|
|
* number of streams
|
|
* @IEEE80211_HE_MCS_SUPPORT_0_9: MCSes 0-9 are supported
|
|
* @IEEE80211_HE_MCS_SUPPORT_0_11: MCSes 0-11 are supported
|
|
* @IEEE80211_HE_MCS_NOT_SUPPORTED: This number of streams isn't supported
|
|
*
|
|
* These definitions are used in each 2-bit subfield of the rx_mcs_*
|
|
* and tx_mcs_* fields of &struct ieee80211_he_mcs_nss_supp, which are
|
|
* both split into 8 subfields by number of streams. These values indicate
|
|
* which MCSes are supported for the number of streams the value appears
|
|
* for.
|
|
*/
|
|
enum ieee80211_he_mcs_support {
|
|
IEEE80211_HE_MCS_SUPPORT_0_7 = 0,
|
|
IEEE80211_HE_MCS_SUPPORT_0_9 = 1,
|
|
IEEE80211_HE_MCS_SUPPORT_0_11 = 2,
|
|
IEEE80211_HE_MCS_NOT_SUPPORTED = 3,
|
|
};
|
|
|
|
/**
|
|
* struct ieee80211_he_mcs_nss_supp - HE Tx/Rx HE MCS NSS Support Field
|
|
*
|
|
* This structure holds the data required for the Tx/Rx HE MCS NSS Support Field
|
|
* described in P802.11ax_D2.0 section 9.4.2.237.4
|
|
*
|
|
* @rx_mcs_80: Rx MCS map 2 bits for each stream, total 8 streams, for channel
|
|
* widths less than 80MHz.
|
|
* @tx_mcs_80: Tx MCS map 2 bits for each stream, total 8 streams, for channel
|
|
* widths less than 80MHz.
|
|
* @rx_mcs_160: Rx MCS map 2 bits for each stream, total 8 streams, for channel
|
|
* width 160MHz.
|
|
* @tx_mcs_160: Tx MCS map 2 bits for each stream, total 8 streams, for channel
|
|
* width 160MHz.
|
|
* @rx_mcs_80p80: Rx MCS map 2 bits for each stream, total 8 streams, for
|
|
* channel width 80p80MHz.
|
|
* @tx_mcs_80p80: Tx MCS map 2 bits for each stream, total 8 streams, for
|
|
* channel width 80p80MHz.
|
|
*/
|
|
struct ieee80211_he_mcs_nss_supp {
|
|
__le16 rx_mcs_80;
|
|
__le16 tx_mcs_80;
|
|
__le16 rx_mcs_160;
|
|
__le16 tx_mcs_160;
|
|
__le16 rx_mcs_80p80;
|
|
__le16 tx_mcs_80p80;
|
|
} __packed;
|
|
|
|
/**
|
|
* struct ieee80211_he_operation - HE capabilities element
|
|
*
|
|
* This structure is the "HE operation element" fields as
|
|
* described in P802.11ax_D2.0 section 9.4.2.238
|
|
*/
|
|
struct ieee80211_he_operation {
|
|
__le32 he_oper_params;
|
|
__le16 he_mcs_nss_set;
|
|
/* Optional 0,1,3 or 4 bytes: depends on @he_oper_params */
|
|
u8 optional[0];
|
|
} __packed;
|
|
|
|
/**
|
|
* struct ieee80211_he_mu_edca_param_ac_rec - MU AC Parameter Record field
|
|
*
|
|
* This structure is the "MU AC Parameter Record" fields as
|
|
* described in P802.11ax_D2.0 section 9.4.2.240
|
|
*/
|
|
struct ieee80211_he_mu_edca_param_ac_rec {
|
|
u8 aifsn;
|
|
u8 ecw_min_max;
|
|
u8 mu_edca_timer;
|
|
} __packed;
|
|
|
|
/**
|
|
* struct ieee80211_mu_edca_param_set - MU EDCA Parameter Set element
|
|
*
|
|
* This structure is the "MU EDCA Parameter Set element" fields as
|
|
* described in P802.11ax_D2.0 section 9.4.2.240
|
|
*/
|
|
struct ieee80211_mu_edca_param_set {
|
|
u8 mu_qos_info;
|
|
struct ieee80211_he_mu_edca_param_ac_rec ac_be;
|
|
struct ieee80211_he_mu_edca_param_ac_rec ac_bk;
|
|
struct ieee80211_he_mu_edca_param_ac_rec ac_vi;
|
|
struct ieee80211_he_mu_edca_param_ac_rec ac_vo;
|
|
} __packed;
|
|
|
|
/* 802.11ac VHT Capabilities */
|
|
#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895 0x00000000
|
|
#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991 0x00000001
|
|
#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 0x00000002
|
|
#define IEEE80211_VHT_CAP_MAX_MPDU_MASK 0x00000003
|
|
#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ 0x00000004
|
|
#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ 0x00000008
|
|
#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK 0x0000000C
|
|
#define IEEE80211_VHT_CAP_RXLDPC 0x00000010
|
|
#define IEEE80211_VHT_CAP_SHORT_GI_80 0x00000020
|
|
#define IEEE80211_VHT_CAP_SHORT_GI_160 0x00000040
|
|
#define IEEE80211_VHT_CAP_TXSTBC 0x00000080
|
|
#define IEEE80211_VHT_CAP_RXSTBC_1 0x00000100
|
|
#define IEEE80211_VHT_CAP_RXSTBC_2 0x00000200
|
|
#define IEEE80211_VHT_CAP_RXSTBC_3 0x00000300
|
|
#define IEEE80211_VHT_CAP_RXSTBC_4 0x00000400
|
|
#define IEEE80211_VHT_CAP_RXSTBC_MASK 0x00000700
|
|
#define IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE 0x00000800
|
|
#define IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE 0x00001000
|
|
#define IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT 13
|
|
#define IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK \
|
|
(7 << IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT)
|
|
#define IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT 16
|
|
#define IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK \
|
|
(7 << IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT)
|
|
#define IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE 0x00080000
|
|
#define IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE 0x00100000
|
|
#define IEEE80211_VHT_CAP_VHT_TXOP_PS 0x00200000
|
|
#define IEEE80211_VHT_CAP_HTC_VHT 0x00400000
|
|
#define IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT 23
|
|
#define IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK \
|
|
(7 << IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT)
|
|
#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_UNSOL_MFB 0x08000000
|
|
#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB 0x0c000000
|
|
#define IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN 0x10000000
|
|
#define IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN 0x20000000
|
|
|
|
/* 802.11ax HE MAC capabilities */
|
|
#define IEEE80211_HE_MAC_CAP0_HTC_HE 0x01
|
|
#define IEEE80211_HE_MAC_CAP0_TWT_REQ 0x02
|
|
#define IEEE80211_HE_MAC_CAP0_TWT_RES 0x04
|
|
#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_NOT_SUPP 0x00
|
|
#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_LEVEL_1 0x08
|
|
#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_LEVEL_2 0x10
|
|
#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_LEVEL_3 0x18
|
|
#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_MASK 0x18
|
|
#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_1 0x00
|
|
#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_2 0x20
|
|
#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_4 0x40
|
|
#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_8 0x60
|
|
#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_16 0x80
|
|
#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_32 0xa0
|
|
#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_64 0xc0
|
|
#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_UNLIMITED 0xe0
|
|
#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_MASK 0xe0
|
|
|
|
#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_UNLIMITED 0x00
|
|
#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_128 0x01
|
|
#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_256 0x02
|
|
#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_512 0x03
|
|
#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_MASK 0x03
|
|
#define IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_0US 0x00
|
|
#define IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_8US 0x04
|
|
#define IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US 0x08
|
|
#define IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_MASK 0x0c
|
|
#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_QOS_1 0x00
|
|
#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_QOS_2 0x10
|
|
#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_QOS_3 0x20
|
|
#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_QOS_4 0x30
|
|
#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_QOS_5 0x40
|
|
#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_QOS_6 0x50
|
|
#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_QOS_7 0x60
|
|
#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_QOS_8 0x70
|
|
#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_QOS_MASK 0x70
|
|
|
|
/* Link adaptation is split between byte HE_MAC_CAP1 and
|
|
* HE_MAC_CAP2. It should be set only if IEEE80211_HE_MAC_CAP0_HTC_HE
|
|
* in which case the following values apply:
|
|
* 0 = No feedback.
|
|
* 1 = reserved.
|
|
* 2 = Unsolicited feedback.
|
|
* 3 = both
|
|
*/
|
|
#define IEEE80211_HE_MAC_CAP1_LINK_ADAPTATION 0x80
|
|
|
|
#define IEEE80211_HE_MAC_CAP2_LINK_ADAPTATION 0x01
|
|
#define IEEE80211_HE_MAC_CAP2_ALL_ACK 0x02
|
|
#define IEEE80211_HE_MAC_CAP2_UL_MU_RESP_SCHED 0x04
|
|
#define IEEE80211_HE_MAC_CAP2_BSR 0x08
|
|
#define IEEE80211_HE_MAC_CAP2_BCAST_TWT 0x10
|
|
#define IEEE80211_HE_MAC_CAP2_32BIT_BA_BITMAP 0x20
|
|
#define IEEE80211_HE_MAC_CAP2_MU_CASCADING 0x40
|
|
#define IEEE80211_HE_MAC_CAP2_ACK_EN 0x80
|
|
|
|
#define IEEE80211_HE_MAC_CAP3_GRP_ADDR_MULTI_STA_BA_DL_MU 0x01
|
|
#define IEEE80211_HE_MAC_CAP3_OMI_CONTROL 0x02
|
|
#define IEEE80211_HE_MAC_CAP3_OFDMA_RA 0x04
|
|
|
|
/* The maximum length of an A-MDPU is defined by the combination of the Maximum
|
|
* A-MDPU Length Exponent field in the HT capabilities, VHT capabilities and the
|
|
* same field in the HE capabilities.
|
|
*/
|
|
#define IEEE80211_HE_MAC_CAP3_MAX_A_AMPDU_LEN_EXP_USE_VHT 0x00
|
|
#define IEEE80211_HE_MAC_CAP3_MAX_A_AMPDU_LEN_EXP_VHT_1 0x08
|
|
#define IEEE80211_HE_MAC_CAP3_MAX_A_AMPDU_LEN_EXP_VHT_2 0x10
|
|
#define IEEE80211_HE_MAC_CAP3_MAX_A_AMPDU_LEN_EXP_RESERVED 0x18
|
|
#define IEEE80211_HE_MAC_CAP3_MAX_A_AMPDU_LEN_EXP_MASK 0x18
|
|
#define IEEE80211_HE_MAC_CAP3_A_AMSDU_FRAG 0x20
|
|
#define IEEE80211_HE_MAC_CAP3_FLEX_TWT_SCHED 0x40
|
|
#define IEEE80211_HE_MAC_CAP3_RX_CTRL_FRAME_TO_MULTIBSS 0x80
|
|
|
|
#define IEEE80211_HE_MAC_CAP4_BSRP_BQRP_A_MPDU_AGG 0x01
|
|
#define IEEE80211_HE_MAC_CAP4_QTP 0x02
|
|
#define IEEE80211_HE_MAC_CAP4_BQR 0x04
|
|
#define IEEE80211_HE_MAC_CAP4_SR_RESP 0x08
|
|
#define IEEE80211_HE_MAC_CAP4_NDP_FB_REP 0x10
|
|
#define IEEE80211_HE_MAC_CAP4_OPS 0x20
|
|
#define IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU 0x40
|
|
|
|
/* 802.11ax HE PHY capabilities */
|
|
#define IEEE80211_HE_PHY_CAP0_DUAL_BAND 0x01
|
|
#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_IN_2G 0x02
|
|
#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G 0x04
|
|
#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G 0x08
|
|
#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G 0x10
|
|
#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_RU_MAPPING_IN_2G 0x20
|
|
#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_RU_MAPPING_IN_5G 0x40
|
|
#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_MASK 0xfe
|
|
|
|
#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_80MHZ_ONLY_SECOND_20MHZ 0x01
|
|
#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_80MHZ_ONLY_SECOND_40MHZ 0x02
|
|
#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_160MHZ_ONLY_SECOND_20MHZ 0x04
|
|
#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_160MHZ_ONLY_SECOND_40MHZ 0x08
|
|
#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK 0x0f
|
|
#define IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A 0x10
|
|
#define IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD 0x20
|
|
#define IEEE80211_HE_PHY_CAP1_HE_LTF_AND_GI_FOR_HE_PPDUS_0_8US 0x40
|
|
/* Midamble RX Max NSTS is split between byte #2 and byte #3 */
|
|
#define IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_MAX_NSTS 0x80
|
|
|
|
#define IEEE80211_HE_PHY_CAP2_MIDAMBLE_RX_MAX_NSTS 0x01
|
|
#define IEEE80211_HE_PHY_CAP2_NDP_4x_LTF_AND_3_2US 0x02
|
|
#define IEEE80211_HE_PHY_CAP2_STBC_TX_UNDER_80MHZ 0x04
|
|
#define IEEE80211_HE_PHY_CAP2_STBC_RX_UNDER_80MHZ 0x08
|
|
#define IEEE80211_HE_PHY_CAP2_DOPPLER_TX 0x10
|
|
#define IEEE80211_HE_PHY_CAP2_DOPPLER_RX 0x20
|
|
|
|
/* Note that the meaning of UL MU below is different between an AP and a non-AP
|
|
* sta, where in the AP case it indicates support for Rx and in the non-AP sta
|
|
* case it indicates support for Tx.
|
|
*/
|
|
#define IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO 0x40
|
|
#define IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO 0x80
|
|
|
|
#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_NO_DCM 0x00
|
|
#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_BPSK 0x01
|
|
#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_QPSK 0x02
|
|
#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_16_QAM 0x03
|
|
#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_MASK 0x03
|
|
#define IEEE80211_HE_PHY_CAP3_DCM_MAX_TX_NSS_1 0x00
|
|
#define IEEE80211_HE_PHY_CAP3_DCM_MAX_TX_NSS_2 0x04
|
|
#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_NO_DCM 0x00
|
|
#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_BPSK 0x08
|
|
#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_QPSK 0x10
|
|
#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_16_QAM 0x18
|
|
#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_MASK 0x18
|
|
#define IEEE80211_HE_PHY_CAP3_DCM_MAX_RX_NSS_1 0x00
|
|
#define IEEE80211_HE_PHY_CAP3_DCM_MAX_RX_NSS_2 0x20
|
|
#define IEEE80211_HE_PHY_CAP3_RX_HE_MU_PPDU_FROM_NON_AP_STA 0x40
|
|
#define IEEE80211_HE_PHY_CAP3_SU_BEAMFORMER 0x80
|
|
|
|
#define IEEE80211_HE_PHY_CAP4_SU_BEAMFORMEE 0x01
|
|
#define IEEE80211_HE_PHY_CAP4_MU_BEAMFORMER 0x02
|
|
|
|
/* Minimal allowed value of Max STS under 80MHz is 3 */
|
|
#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_4 0x0c
|
|
#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_5 0x10
|
|
#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_6 0x14
|
|
#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_7 0x18
|
|
#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_8 0x1c
|
|
#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_MASK 0x1c
|
|
|
|
/* Minimal allowed value of Max STS above 80MHz is 3 */
|
|
#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_4 0x60
|
|
#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_5 0x80
|
|
#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_6 0xa0
|
|
#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_7 0xc0
|
|
#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_8 0xe0
|
|
#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_MASK 0xe0
|
|
|
|
#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_1 0x00
|
|
#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_2 0x01
|
|
#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_3 0x02
|
|
#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_4 0x03
|
|
#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_5 0x04
|
|
#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_6 0x05
|
|
#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_7 0x06
|
|
#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_8 0x07
|
|
#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_MASK 0x07
|
|
|
|
#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_1 0x00
|
|
#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_2 0x08
|
|
#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_3 0x10
|
|
#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_4 0x18
|
|
#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_5 0x20
|
|
#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_6 0x28
|
|
#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_7 0x30
|
|
#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_8 0x38
|
|
#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_MASK 0x38
|
|
|
|
#define IEEE80211_HE_PHY_CAP5_NG16_SU_FEEDBACK 0x40
|
|
#define IEEE80211_HE_PHY_CAP5_NG16_MU_FEEDBACK 0x80
|
|
|
|
#define IEEE80211_HE_PHY_CAP6_CODEBOOK_SIZE_42_SU 0x01
|
|
#define IEEE80211_HE_PHY_CAP6_CODEBOOK_SIZE_75_MU 0x02
|
|
#define IEEE80211_HE_PHY_CAP6_TRIG_SU_BEAMFORMER_FB 0x04
|
|
#define IEEE80211_HE_PHY_CAP6_TRIG_MU_BEAMFORMER_FB 0x08
|
|
#define IEEE80211_HE_PHY_CAP6_TRIG_CQI_FB 0x10
|
|
#define IEEE80211_HE_PHY_CAP6_PARTIAL_BW_EXT_RANGE 0x20
|
|
#define IEEE80211_HE_PHY_CAP6_PARTIAL_BANDWIDTH_DL_MUMIMO 0x40
|
|
#define IEEE80211_HE_PHY_CAP6_PPE_THRESHOLD_PRESENT 0x80
|
|
|
|
#define IEEE80211_HE_PHY_CAP7_SRP_BASED_SR 0x01
|
|
#define IEEE80211_HE_PHY_CAP7_POWER_BOOST_FACTOR_AR 0x02
|
|
#define IEEE80211_HE_PHY_CAP7_HE_SU_MU_PPDU_4XLTF_AND_08_US_GI 0x04
|
|
#define IEEE80211_HE_PHY_CAP7_MAX_NC_1 0x08
|
|
#define IEEE80211_HE_PHY_CAP7_MAX_NC_2 0x10
|
|
#define IEEE80211_HE_PHY_CAP7_MAX_NC_3 0x18
|
|
#define IEEE80211_HE_PHY_CAP7_MAX_NC_4 0x20
|
|
#define IEEE80211_HE_PHY_CAP7_MAX_NC_5 0x28
|
|
#define IEEE80211_HE_PHY_CAP7_MAX_NC_6 0x30
|
|
#define IEEE80211_HE_PHY_CAP7_MAX_NC_7 0x38
|
|
#define IEEE80211_HE_PHY_CAP7_MAX_NC_MASK 0x38
|
|
#define IEEE80211_HE_PHY_CAP7_STBC_TX_ABOVE_80MHZ 0x40
|
|
#define IEEE80211_HE_PHY_CAP7_STBC_RX_ABOVE_80MHZ 0x80
|
|
|
|
#define IEEE80211_HE_PHY_CAP8_HE_ER_SU_PPDU_4XLTF_AND_08_US_GI 0x01
|
|
#define IEEE80211_HE_PHY_CAP8_20MHZ_IN_40MHZ_HE_PPDU_IN_2G 0x02
|
|
#define IEEE80211_HE_PHY_CAP8_20MHZ_IN_160MHZ_HE_PPDU 0x04
|
|
#define IEEE80211_HE_PHY_CAP8_80MHZ_IN_160MHZ_HE_PPDU 0x08
|
|
#define IEEE80211_HE_PHY_CAP8_HE_ER_SU_1XLTF_AND_08_US_GI 0x10
|
|
#define IEEE80211_HE_PHY_CAP8_MIDAMBLE_RX_2X_AND_1XLTF 0x20
|
|
|
|
/* 802.11ax HE TX/RX MCS NSS Support */
|
|
#define IEEE80211_TX_RX_MCS_NSS_SUPP_HIGHEST_MCS_POS (3)
|
|
#define IEEE80211_TX_RX_MCS_NSS_SUPP_TX_BITMAP_POS (6)
|
|
#define IEEE80211_TX_RX_MCS_NSS_SUPP_RX_BITMAP_POS (11)
|
|
#define IEEE80211_TX_RX_MCS_NSS_SUPP_TX_BITMAP_MASK 0x07c0
|
|
#define IEEE80211_TX_RX_MCS_NSS_SUPP_RX_BITMAP_MASK 0xf800
|
|
|
|
/* TX/RX HE MCS Support field Highest MCS subfield encoding */
|
|
enum ieee80211_he_highest_mcs_supported_subfield_enc {
|
|
HIGHEST_MCS_SUPPORTED_MCS7 = 0,
|
|
HIGHEST_MCS_SUPPORTED_MCS8,
|
|
HIGHEST_MCS_SUPPORTED_MCS9,
|
|
HIGHEST_MCS_SUPPORTED_MCS10,
|
|
HIGHEST_MCS_SUPPORTED_MCS11,
|
|
};
|
|
|
|
/* Calculate 802.11ax HE capabilities IE Tx/Rx HE MCS NSS Support Field size */
|
|
static inline u8
|
|
ieee80211_he_mcs_nss_size(const struct ieee80211_he_cap_elem *he_cap)
|
|
{
|
|
u8 count = 4;
|
|
|
|
if (he_cap->phy_cap_info[0] &
|
|
IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G)
|
|
count += 4;
|
|
|
|
if (he_cap->phy_cap_info[0] &
|
|
IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G)
|
|
count += 4;
|
|
|
|
return count;
|
|
}
|
|
|
|
/* 802.11ax HE PPE Thresholds */
|
|
#define IEEE80211_PPE_THRES_NSS_SUPPORT_2NSS (1)
|
|
#define IEEE80211_PPE_THRES_NSS_POS (0)
|
|
#define IEEE80211_PPE_THRES_NSS_MASK (7)
|
|
#define IEEE80211_PPE_THRES_RU_INDEX_BITMASK_2x966_AND_966_RU \
|
|
(BIT(5) | BIT(6))
|
|
#define IEEE80211_PPE_THRES_RU_INDEX_BITMASK_MASK 0x78
|
|
#define IEEE80211_PPE_THRES_RU_INDEX_BITMASK_POS (3)
|
|
#define IEEE80211_PPE_THRES_INFO_PPET_SIZE (3)
|
|
|
|
/*
|
|
* Calculate 802.11ax HE capabilities IE PPE field size
|
|
* Input: Header byte of ppe_thres (first byte), and HE capa IE's PHY cap u8*
|
|
*/
|
|
static inline u8
|
|
ieee80211_he_ppe_size(u8 ppe_thres_hdr, const u8 *phy_cap_info)
|
|
{
|
|
u8 n;
|
|
|
|
if ((phy_cap_info[6] &
|
|
IEEE80211_HE_PHY_CAP6_PPE_THRESHOLD_PRESENT) == 0)
|
|
return 0;
|
|
|
|
n = hweight8(ppe_thres_hdr &
|
|
IEEE80211_PPE_THRES_RU_INDEX_BITMASK_MASK);
|
|
n *= (1 + ((ppe_thres_hdr & IEEE80211_PPE_THRES_NSS_MASK) >>
|
|
IEEE80211_PPE_THRES_NSS_POS));
|
|
|
|
/*
|
|
* Each pair is 6 bits, and we need to add the 7 "header" bits to the
|
|
* total size.
|
|
*/
|
|
n = (n * IEEE80211_PPE_THRES_INFO_PPET_SIZE * 2) + 7;
|
|
n = DIV_ROUND_UP(n, 8);
|
|
|
|
return n;
|
|
}
|
|
|
|
/* HE Operation defines */
|
|
#define IEEE80211_HE_OPERATION_BSS_COLOR_MASK 0x0000003f
|
|
#define IEEE80211_HE_OPERATION_DFLT_PE_DURATION_MASK 0x000001c0
|
|
#define IEEE80211_HE_OPERATION_DFLT_PE_DURATION_OFFSET 6
|
|
#define IEEE80211_HE_OPERATION_TWT_REQUIRED 0x00000200
|
|
#define IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK 0x000ffc00
|
|
#define IEEE80211_HE_OPERATION_RTS_THRESHOLD_OFFSET 10
|
|
#define IEEE80211_HE_OPERATION_PARTIAL_BSS_COLOR 0x000100000
|
|
#define IEEE80211_HE_OPERATION_VHT_OPER_INFO 0x000200000
|
|
#define IEEE80211_HE_OPERATION_MULTI_BSSID_AP 0x10000000
|
|
#define IEEE80211_HE_OPERATION_TX_BSSID_INDICATOR 0x20000000
|
|
#define IEEE80211_HE_OPERATION_BSS_COLOR_DISABLED 0x40000000
|
|
|
|
/*
|
|
* ieee80211_he_oper_size - calculate 802.11ax HE Operations IE size
|
|
* @he_oper_ie: byte data of the He Operations IE, stating from the the byte
|
|
* after the ext ID byte. It is assumed that he_oper_ie has at least
|
|
* sizeof(struct ieee80211_he_operation) bytes, checked already in
|
|
* ieee802_11_parse_elems_crc()
|
|
* @return the actual size of the IE data (not including header), or 0 on error
|
|
*/
|
|
static inline u8
|
|
ieee80211_he_oper_size(const u8 *he_oper_ie)
|
|
{
|
|
struct ieee80211_he_operation *he_oper = (void *)he_oper_ie;
|
|
u8 oper_len = sizeof(struct ieee80211_he_operation);
|
|
u32 he_oper_params;
|
|
|
|
/* Make sure the input is not NULL */
|
|
if (!he_oper_ie)
|
|
return 0;
|
|
|
|
/* Calc required length */
|
|
he_oper_params = le32_to_cpu(he_oper->he_oper_params);
|
|
if (he_oper_params & IEEE80211_HE_OPERATION_VHT_OPER_INFO)
|
|
oper_len += 3;
|
|
if (he_oper_params & IEEE80211_HE_OPERATION_MULTI_BSSID_AP)
|
|
oper_len++;
|
|
|
|
/* Add the first byte (extension ID) to the total length */
|
|
oper_len++;
|
|
|
|
return oper_len;
|
|
}
|
|
|
|
/* Authentication algorithms */
|
|
#define WLAN_AUTH_OPEN 0
|
|
#define WLAN_AUTH_SHARED_KEY 1
|
|
#define WLAN_AUTH_FT 2
|
|
#define WLAN_AUTH_SAE 3
|
|
#define WLAN_AUTH_FILS_SK 4
|
|
#define WLAN_AUTH_FILS_SK_PFS 5
|
|
#define WLAN_AUTH_FILS_PK 6
|
|
#define WLAN_AUTH_LEAP 128
|
|
|
|
#define WLAN_AUTH_CHALLENGE_LEN 128
|
|
|
|
#define WLAN_CAPABILITY_ESS (1<<0)
|
|
#define WLAN_CAPABILITY_IBSS (1<<1)
|
|
|
|
/*
|
|
* A mesh STA sets the ESS and IBSS capability bits to zero.
|
|
* however, this holds true for p2p probe responses (in the p2p_find
|
|
* phase) as well.
|
|
*/
|
|
#define WLAN_CAPABILITY_IS_STA_BSS(cap) \
|
|
(!((cap) & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)))
|
|
|
|
#define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
|
|
#define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3)
|
|
#define WLAN_CAPABILITY_PRIVACY (1<<4)
|
|
#define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5)
|
|
#define WLAN_CAPABILITY_PBCC (1<<6)
|
|
#define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7)
|
|
|
|
/* 802.11h */
|
|
#define WLAN_CAPABILITY_SPECTRUM_MGMT (1<<8)
|
|
#define WLAN_CAPABILITY_QOS (1<<9)
|
|
#define WLAN_CAPABILITY_SHORT_SLOT_TIME (1<<10)
|
|
#define WLAN_CAPABILITY_APSD (1<<11)
|
|
#define WLAN_CAPABILITY_RADIO_MEASURE (1<<12)
|
|
#define WLAN_CAPABILITY_DSSS_OFDM (1<<13)
|
|
#define WLAN_CAPABILITY_DEL_BACK (1<<14)
|
|
#define WLAN_CAPABILITY_IMM_BACK (1<<15)
|
|
|
|
/* DMG (60gHz) 802.11ad */
|
|
/* type - bits 0..1 */
|
|
#define WLAN_CAPABILITY_DMG_TYPE_MASK (3<<0)
|
|
#define WLAN_CAPABILITY_DMG_TYPE_IBSS (1<<0) /* Tx by: STA */
|
|
#define WLAN_CAPABILITY_DMG_TYPE_PBSS (2<<0) /* Tx by: PCP */
|
|
#define WLAN_CAPABILITY_DMG_TYPE_AP (3<<0) /* Tx by: AP */
|
|
|
|
#define WLAN_CAPABILITY_DMG_CBAP_ONLY (1<<2)
|
|
#define WLAN_CAPABILITY_DMG_CBAP_SOURCE (1<<3)
|
|
#define WLAN_CAPABILITY_DMG_PRIVACY (1<<4)
|
|
#define WLAN_CAPABILITY_DMG_ECPAC (1<<5)
|
|
|
|
#define WLAN_CAPABILITY_DMG_SPECTRUM_MGMT (1<<8)
|
|
#define WLAN_CAPABILITY_DMG_RADIO_MEASURE (1<<12)
|
|
|
|
/* measurement */
|
|
#define IEEE80211_SPCT_MSR_RPRT_MODE_LATE (1<<0)
|
|
#define IEEE80211_SPCT_MSR_RPRT_MODE_INCAPABLE (1<<1)
|
|
#define IEEE80211_SPCT_MSR_RPRT_MODE_REFUSED (1<<2)
|
|
|
|
#define IEEE80211_SPCT_MSR_RPRT_TYPE_BASIC 0
|
|
#define IEEE80211_SPCT_MSR_RPRT_TYPE_CCA 1
|
|
#define IEEE80211_SPCT_MSR_RPRT_TYPE_RPI 2
|
|
|
|
/* 802.11g ERP information element */
|
|
#define WLAN_ERP_NON_ERP_PRESENT (1<<0)
|
|
#define WLAN_ERP_USE_PROTECTION (1<<1)
|
|
#define WLAN_ERP_BARKER_PREAMBLE (1<<2)
|
|
|
|
/* WLAN_ERP_BARKER_PREAMBLE values */
|
|
enum {
|
|
WLAN_ERP_PREAMBLE_SHORT = 0,
|
|
WLAN_ERP_PREAMBLE_LONG = 1,
|
|
};
|
|
|
|
/* Band ID, 802.11ad #8.4.1.45 */
|
|
enum {
|
|
IEEE80211_BANDID_TV_WS = 0, /* TV white spaces */
|
|
IEEE80211_BANDID_SUB1 = 1, /* Sub-1 GHz (excluding TV white spaces) */
|
|
IEEE80211_BANDID_2G = 2, /* 2.4 GHz */
|
|
IEEE80211_BANDID_3G = 3, /* 3.6 GHz */
|
|
IEEE80211_BANDID_5G = 4, /* 4.9 and 5 GHz */
|
|
IEEE80211_BANDID_60G = 5, /* 60 GHz */
|
|
};
|
|
|
|
/* Status codes */
|
|
enum ieee80211_statuscode {
|
|
WLAN_STATUS_SUCCESS = 0,
|
|
WLAN_STATUS_UNSPECIFIED_FAILURE = 1,
|
|
WLAN_STATUS_CAPS_UNSUPPORTED = 10,
|
|
WLAN_STATUS_REASSOC_NO_ASSOC = 11,
|
|
WLAN_STATUS_ASSOC_DENIED_UNSPEC = 12,
|
|
WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG = 13,
|
|
WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION = 14,
|
|
WLAN_STATUS_CHALLENGE_FAIL = 15,
|
|
WLAN_STATUS_AUTH_TIMEOUT = 16,
|
|
WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA = 17,
|
|
WLAN_STATUS_ASSOC_DENIED_RATES = 18,
|
|
/* 802.11b */
|
|
WLAN_STATUS_ASSOC_DENIED_NOSHORTPREAMBLE = 19,
|
|
WLAN_STATUS_ASSOC_DENIED_NOPBCC = 20,
|
|
WLAN_STATUS_ASSOC_DENIED_NOAGILITY = 21,
|
|
/* 802.11h */
|
|
WLAN_STATUS_ASSOC_DENIED_NOSPECTRUM = 22,
|
|
WLAN_STATUS_ASSOC_REJECTED_BAD_POWER = 23,
|
|
WLAN_STATUS_ASSOC_REJECTED_BAD_SUPP_CHAN = 24,
|
|
/* 802.11g */
|
|
WLAN_STATUS_ASSOC_DENIED_NOSHORTTIME = 25,
|
|
WLAN_STATUS_ASSOC_DENIED_NODSSSOFDM = 26,
|
|
/* 802.11w */
|
|
WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY = 30,
|
|
WLAN_STATUS_ROBUST_MGMT_FRAME_POLICY_VIOLATION = 31,
|
|
/* 802.11i */
|
|
WLAN_STATUS_INVALID_IE = 40,
|
|
WLAN_STATUS_INVALID_GROUP_CIPHER = 41,
|
|
WLAN_STATUS_INVALID_PAIRWISE_CIPHER = 42,
|
|
WLAN_STATUS_INVALID_AKMP = 43,
|
|
WLAN_STATUS_UNSUPP_RSN_VERSION = 44,
|
|
WLAN_STATUS_INVALID_RSN_IE_CAP = 45,
|
|
WLAN_STATUS_CIPHER_SUITE_REJECTED = 46,
|
|
/* 802.11e */
|
|
WLAN_STATUS_UNSPECIFIED_QOS = 32,
|
|
WLAN_STATUS_ASSOC_DENIED_NOBANDWIDTH = 33,
|
|
WLAN_STATUS_ASSOC_DENIED_LOWACK = 34,
|
|
WLAN_STATUS_ASSOC_DENIED_UNSUPP_QOS = 35,
|
|
WLAN_STATUS_REQUEST_DECLINED = 37,
|
|
WLAN_STATUS_INVALID_QOS_PARAM = 38,
|
|
WLAN_STATUS_CHANGE_TSPEC = 39,
|
|
WLAN_STATUS_WAIT_TS_DELAY = 47,
|
|
WLAN_STATUS_NO_DIRECT_LINK = 48,
|
|
WLAN_STATUS_STA_NOT_PRESENT = 49,
|
|
WLAN_STATUS_STA_NOT_QSTA = 50,
|
|
/* 802.11s */
|
|
WLAN_STATUS_ANTI_CLOG_REQUIRED = 76,
|
|
WLAN_STATUS_FCG_NOT_SUPP = 78,
|
|
WLAN_STATUS_STA_NO_TBTT = 78,
|
|
/* 802.11ad */
|
|
WLAN_STATUS_REJECTED_WITH_SUGGESTED_CHANGES = 39,
|
|
WLAN_STATUS_REJECTED_FOR_DELAY_PERIOD = 47,
|
|
WLAN_STATUS_REJECT_WITH_SCHEDULE = 83,
|
|
WLAN_STATUS_PENDING_ADMITTING_FST_SESSION = 86,
|
|
WLAN_STATUS_PERFORMING_FST_NOW = 87,
|
|
WLAN_STATUS_PENDING_GAP_IN_BA_WINDOW = 88,
|
|
WLAN_STATUS_REJECT_U_PID_SETTING = 89,
|
|
WLAN_STATUS_REJECT_DSE_BAND = 96,
|
|
WLAN_STATUS_DENIED_WITH_SUGGESTED_BAND_AND_CHANNEL = 99,
|
|
WLAN_STATUS_DENIED_DUE_TO_SPECTRUM_MANAGEMENT = 103,
|
|
/* 802.11ai */
|
|
WLAN_STATUS_FILS_AUTHENTICATION_FAILURE = 108,
|
|
WLAN_STATUS_UNKNOWN_AUTHENTICATION_SERVER = 109,
|
|
};
|
|
|
|
|
|
/* Reason codes */
|
|
enum ieee80211_reasoncode {
|
|
WLAN_REASON_UNSPECIFIED = 1,
|
|
WLAN_REASON_PREV_AUTH_NOT_VALID = 2,
|
|
WLAN_REASON_DEAUTH_LEAVING = 3,
|
|
WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY = 4,
|
|
WLAN_REASON_DISASSOC_AP_BUSY = 5,
|
|
WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA = 6,
|
|
WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA = 7,
|
|
WLAN_REASON_DISASSOC_STA_HAS_LEFT = 8,
|
|
WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH = 9,
|
|
/* 802.11h */
|
|
WLAN_REASON_DISASSOC_BAD_POWER = 10,
|
|
WLAN_REASON_DISASSOC_BAD_SUPP_CHAN = 11,
|
|
/* 802.11i */
|
|
WLAN_REASON_INVALID_IE = 13,
|
|
WLAN_REASON_MIC_FAILURE = 14,
|
|
WLAN_REASON_4WAY_HANDSHAKE_TIMEOUT = 15,
|
|
WLAN_REASON_GROUP_KEY_HANDSHAKE_TIMEOUT = 16,
|
|
WLAN_REASON_IE_DIFFERENT = 17,
|
|
WLAN_REASON_INVALID_GROUP_CIPHER = 18,
|
|
WLAN_REASON_INVALID_PAIRWISE_CIPHER = 19,
|
|
WLAN_REASON_INVALID_AKMP = 20,
|
|
WLAN_REASON_UNSUPP_RSN_VERSION = 21,
|
|
WLAN_REASON_INVALID_RSN_IE_CAP = 22,
|
|
WLAN_REASON_IEEE8021X_FAILED = 23,
|
|
WLAN_REASON_CIPHER_SUITE_REJECTED = 24,
|
|
/* TDLS (802.11z) */
|
|
WLAN_REASON_TDLS_TEARDOWN_UNREACHABLE = 25,
|
|
WLAN_REASON_TDLS_TEARDOWN_UNSPECIFIED = 26,
|
|
/* 802.11e */
|
|
WLAN_REASON_DISASSOC_UNSPECIFIED_QOS = 32,
|
|
WLAN_REASON_DISASSOC_QAP_NO_BANDWIDTH = 33,
|
|
WLAN_REASON_DISASSOC_LOW_ACK = 34,
|
|
WLAN_REASON_DISASSOC_QAP_EXCEED_TXOP = 35,
|
|
WLAN_REASON_QSTA_LEAVE_QBSS = 36,
|
|
WLAN_REASON_QSTA_NOT_USE = 37,
|
|
WLAN_REASON_QSTA_REQUIRE_SETUP = 38,
|
|
WLAN_REASON_QSTA_TIMEOUT = 39,
|
|
WLAN_REASON_QSTA_CIPHER_NOT_SUPP = 45,
|
|
/* 802.11s */
|
|
WLAN_REASON_MESH_PEER_CANCELED = 52,
|
|
WLAN_REASON_MESH_MAX_PEERS = 53,
|
|
WLAN_REASON_MESH_CONFIG = 54,
|
|
WLAN_REASON_MESH_CLOSE = 55,
|
|
WLAN_REASON_MESH_MAX_RETRIES = 56,
|
|
WLAN_REASON_MESH_CONFIRM_TIMEOUT = 57,
|
|
WLAN_REASON_MESH_INVALID_GTK = 58,
|
|
WLAN_REASON_MESH_INCONSISTENT_PARAM = 59,
|
|
WLAN_REASON_MESH_INVALID_SECURITY = 60,
|
|
WLAN_REASON_MESH_PATH_ERROR = 61,
|
|
WLAN_REASON_MESH_PATH_NOFORWARD = 62,
|
|
WLAN_REASON_MESH_PATH_DEST_UNREACHABLE = 63,
|
|
WLAN_REASON_MAC_EXISTS_IN_MBSS = 64,
|
|
WLAN_REASON_MESH_CHAN_REGULATORY = 65,
|
|
WLAN_REASON_MESH_CHAN = 66,
|
|
};
|
|
|
|
|
|
/* Information Element IDs */
|
|
enum ieee80211_eid {
|
|
WLAN_EID_SSID = 0,
|
|
WLAN_EID_SUPP_RATES = 1,
|
|
WLAN_EID_FH_PARAMS = 2, /* reserved now */
|
|
WLAN_EID_DS_PARAMS = 3,
|
|
WLAN_EID_CF_PARAMS = 4,
|
|
WLAN_EID_TIM = 5,
|
|
WLAN_EID_IBSS_PARAMS = 6,
|
|
WLAN_EID_COUNTRY = 7,
|
|
/* 8, 9 reserved */
|
|
WLAN_EID_REQUEST = 10,
|
|
WLAN_EID_QBSS_LOAD = 11,
|
|
WLAN_EID_EDCA_PARAM_SET = 12,
|
|
WLAN_EID_TSPEC = 13,
|
|
WLAN_EID_TCLAS = 14,
|
|
WLAN_EID_SCHEDULE = 15,
|
|
WLAN_EID_CHALLENGE = 16,
|
|
/* 17-31 reserved for challenge text extension */
|
|
WLAN_EID_PWR_CONSTRAINT = 32,
|
|
WLAN_EID_PWR_CAPABILITY = 33,
|
|
WLAN_EID_TPC_REQUEST = 34,
|
|
WLAN_EID_TPC_REPORT = 35,
|
|
WLAN_EID_SUPPORTED_CHANNELS = 36,
|
|
WLAN_EID_CHANNEL_SWITCH = 37,
|
|
WLAN_EID_MEASURE_REQUEST = 38,
|
|
WLAN_EID_MEASURE_REPORT = 39,
|
|
WLAN_EID_QUIET = 40,
|
|
WLAN_EID_IBSS_DFS = 41,
|
|
WLAN_EID_ERP_INFO = 42,
|
|
WLAN_EID_TS_DELAY = 43,
|
|
WLAN_EID_TCLAS_PROCESSING = 44,
|
|
WLAN_EID_HT_CAPABILITY = 45,
|
|
WLAN_EID_QOS_CAPA = 46,
|
|
/* 47 reserved for Broadcom */
|
|
WLAN_EID_RSN = 48,
|
|
WLAN_EID_802_15_COEX = 49,
|
|
WLAN_EID_EXT_SUPP_RATES = 50,
|
|
WLAN_EID_AP_CHAN_REPORT = 51,
|
|
WLAN_EID_NEIGHBOR_REPORT = 52,
|
|
WLAN_EID_RCPI = 53,
|
|
WLAN_EID_MOBILITY_DOMAIN = 54,
|
|
WLAN_EID_FAST_BSS_TRANSITION = 55,
|
|
WLAN_EID_TIMEOUT_INTERVAL = 56,
|
|
WLAN_EID_RIC_DATA = 57,
|
|
WLAN_EID_DSE_REGISTERED_LOCATION = 58,
|
|
WLAN_EID_SUPPORTED_REGULATORY_CLASSES = 59,
|
|
WLAN_EID_EXT_CHANSWITCH_ANN = 60,
|
|
WLAN_EID_HT_OPERATION = 61,
|
|
WLAN_EID_SECONDARY_CHANNEL_OFFSET = 62,
|
|
WLAN_EID_BSS_AVG_ACCESS_DELAY = 63,
|
|
WLAN_EID_ANTENNA_INFO = 64,
|
|
WLAN_EID_RSNI = 65,
|
|
WLAN_EID_MEASUREMENT_PILOT_TX_INFO = 66,
|
|
WLAN_EID_BSS_AVAILABLE_CAPACITY = 67,
|
|
WLAN_EID_BSS_AC_ACCESS_DELAY = 68,
|
|
WLAN_EID_TIME_ADVERTISEMENT = 69,
|
|
WLAN_EID_RRM_ENABLED_CAPABILITIES = 70,
|
|
WLAN_EID_MULTIPLE_BSSID = 71,
|
|
WLAN_EID_BSS_COEX_2040 = 72,
|
|
WLAN_EID_BSS_INTOLERANT_CHL_REPORT = 73,
|
|
WLAN_EID_OVERLAP_BSS_SCAN_PARAM = 74,
|
|
WLAN_EID_RIC_DESCRIPTOR = 75,
|
|
WLAN_EID_MMIE = 76,
|
|
WLAN_EID_ASSOC_COMEBACK_TIME = 77,
|
|
WLAN_EID_EVENT_REQUEST = 78,
|
|
WLAN_EID_EVENT_REPORT = 79,
|
|
WLAN_EID_DIAGNOSTIC_REQUEST = 80,
|
|
WLAN_EID_DIAGNOSTIC_REPORT = 81,
|
|
WLAN_EID_LOCATION_PARAMS = 82,
|
|
WLAN_EID_NON_TX_BSSID_CAP = 83,
|
|
WLAN_EID_SSID_LIST = 84,
|
|
WLAN_EID_MULTI_BSSID_IDX = 85,
|
|
WLAN_EID_FMS_DESCRIPTOR = 86,
|
|
WLAN_EID_FMS_REQUEST = 87,
|
|
WLAN_EID_FMS_RESPONSE = 88,
|
|
WLAN_EID_QOS_TRAFFIC_CAPA = 89,
|
|
WLAN_EID_BSS_MAX_IDLE_PERIOD = 90,
|
|
WLAN_EID_TSF_REQUEST = 91,
|
|
WLAN_EID_TSF_RESPOSNE = 92,
|
|
WLAN_EID_WNM_SLEEP_MODE = 93,
|
|
WLAN_EID_TIM_BCAST_REQ = 94,
|
|
WLAN_EID_TIM_BCAST_RESP = 95,
|
|
WLAN_EID_COLL_IF_REPORT = 96,
|
|
WLAN_EID_CHANNEL_USAGE = 97,
|
|
WLAN_EID_TIME_ZONE = 98,
|
|
WLAN_EID_DMS_REQUEST = 99,
|
|
WLAN_EID_DMS_RESPONSE = 100,
|
|
WLAN_EID_LINK_ID = 101,
|
|
WLAN_EID_WAKEUP_SCHEDUL = 102,
|
|
/* 103 reserved */
|
|
WLAN_EID_CHAN_SWITCH_TIMING = 104,
|
|
WLAN_EID_PTI_CONTROL = 105,
|
|
WLAN_EID_PU_BUFFER_STATUS = 106,
|
|
WLAN_EID_INTERWORKING = 107,
|
|
WLAN_EID_ADVERTISEMENT_PROTOCOL = 108,
|
|
WLAN_EID_EXPEDITED_BW_REQ = 109,
|
|
WLAN_EID_QOS_MAP_SET = 110,
|
|
WLAN_EID_ROAMING_CONSORTIUM = 111,
|
|
WLAN_EID_EMERGENCY_ALERT = 112,
|
|
WLAN_EID_MESH_CONFIG = 113,
|
|
WLAN_EID_MESH_ID = 114,
|
|
WLAN_EID_LINK_METRIC_REPORT = 115,
|
|
WLAN_EID_CONGESTION_NOTIFICATION = 116,
|
|
WLAN_EID_PEER_MGMT = 117,
|
|
WLAN_EID_CHAN_SWITCH_PARAM = 118,
|
|
WLAN_EID_MESH_AWAKE_WINDOW = 119,
|
|
WLAN_EID_BEACON_TIMING = 120,
|
|
WLAN_EID_MCCAOP_SETUP_REQ = 121,
|
|
WLAN_EID_MCCAOP_SETUP_RESP = 122,
|
|
WLAN_EID_MCCAOP_ADVERT = 123,
|
|
WLAN_EID_MCCAOP_TEARDOWN = 124,
|
|
WLAN_EID_GANN = 125,
|
|
WLAN_EID_RANN = 126,
|
|
WLAN_EID_EXT_CAPABILITY = 127,
|
|
/* 128, 129 reserved for Agere */
|
|
WLAN_EID_PREQ = 130,
|
|
WLAN_EID_PREP = 131,
|
|
WLAN_EID_PERR = 132,
|
|
/* 133-136 reserved for Cisco */
|
|
WLAN_EID_PXU = 137,
|
|
WLAN_EID_PXUC = 138,
|
|
WLAN_EID_AUTH_MESH_PEER_EXCH = 139,
|
|
WLAN_EID_MIC = 140,
|
|
WLAN_EID_DESTINATION_URI = 141,
|
|
WLAN_EID_UAPSD_COEX = 142,
|
|
WLAN_EID_WAKEUP_SCHEDULE = 143,
|
|
WLAN_EID_EXT_SCHEDULE = 144,
|
|
WLAN_EID_STA_AVAILABILITY = 145,
|
|
WLAN_EID_DMG_TSPEC = 146,
|
|
WLAN_EID_DMG_AT = 147,
|
|
WLAN_EID_DMG_CAP = 148,
|
|
/* 149 reserved for Cisco */
|
|
WLAN_EID_CISCO_VENDOR_SPECIFIC = 150,
|
|
WLAN_EID_DMG_OPERATION = 151,
|
|
WLAN_EID_DMG_BSS_PARAM_CHANGE = 152,
|
|
WLAN_EID_DMG_BEAM_REFINEMENT = 153,
|
|
WLAN_EID_CHANNEL_MEASURE_FEEDBACK = 154,
|
|
/* 155-156 reserved for Cisco */
|
|
WLAN_EID_AWAKE_WINDOW = 157,
|
|
WLAN_EID_MULTI_BAND = 158,
|
|
WLAN_EID_ADDBA_EXT = 159,
|
|
WLAN_EID_NEXT_PCP_LIST = 160,
|
|
WLAN_EID_PCP_HANDOVER = 161,
|
|
WLAN_EID_DMG_LINK_MARGIN = 162,
|
|
WLAN_EID_SWITCHING_STREAM = 163,
|
|
WLAN_EID_SESSION_TRANSITION = 164,
|
|
WLAN_EID_DYN_TONE_PAIRING_REPORT = 165,
|
|
WLAN_EID_CLUSTER_REPORT = 166,
|
|
WLAN_EID_RELAY_CAP = 167,
|
|
WLAN_EID_RELAY_XFER_PARAM_SET = 168,
|
|
WLAN_EID_BEAM_LINK_MAINT = 169,
|
|
WLAN_EID_MULTIPLE_MAC_ADDR = 170,
|
|
WLAN_EID_U_PID = 171,
|
|
WLAN_EID_DMG_LINK_ADAPT_ACK = 172,
|
|
/* 173 reserved for Symbol */
|
|
WLAN_EID_MCCAOP_ADV_OVERVIEW = 174,
|
|
WLAN_EID_QUIET_PERIOD_REQ = 175,
|
|
/* 176 reserved for Symbol */
|
|
WLAN_EID_QUIET_PERIOD_RESP = 177,
|
|
/* 178-179 reserved for Symbol */
|
|
/* 180 reserved for ISO/IEC 20011 */
|
|
WLAN_EID_EPAC_POLICY = 182,
|
|
WLAN_EID_CLISTER_TIME_OFF = 183,
|
|
WLAN_EID_INTER_AC_PRIO = 184,
|
|
WLAN_EID_SCS_DESCRIPTOR = 185,
|
|
WLAN_EID_QLOAD_REPORT = 186,
|
|
WLAN_EID_HCCA_TXOP_UPDATE_COUNT = 187,
|
|
WLAN_EID_HL_STREAM_ID = 188,
|
|
WLAN_EID_GCR_GROUP_ADDR = 189,
|
|
WLAN_EID_ANTENNA_SECTOR_ID_PATTERN = 190,
|
|
WLAN_EID_VHT_CAPABILITY = 191,
|
|
WLAN_EID_VHT_OPERATION = 192,
|
|
WLAN_EID_EXTENDED_BSS_LOAD = 193,
|
|
WLAN_EID_WIDE_BW_CHANNEL_SWITCH = 194,
|
|
WLAN_EID_VHT_TX_POWER_ENVELOPE = 195,
|
|
WLAN_EID_CHANNEL_SWITCH_WRAPPER = 196,
|
|
WLAN_EID_AID = 197,
|
|
WLAN_EID_QUIET_CHANNEL = 198,
|
|
WLAN_EID_OPMODE_NOTIF = 199,
|
|
|
|
WLAN_EID_VENDOR_SPECIFIC = 221,
|
|
WLAN_EID_QOS_PARAMETER = 222,
|
|
WLAN_EID_CAG_NUMBER = 237,
|
|
WLAN_EID_AP_CSN = 239,
|
|
WLAN_EID_FILS_INDICATION = 240,
|
|
WLAN_EID_DILS = 241,
|
|
WLAN_EID_FRAGMENT = 242,
|
|
WLAN_EID_EXTENSION = 255
|
|
};
|
|
|
|
/* Element ID Extensions for Element ID 255 */
|
|
enum ieee80211_eid_ext {
|
|
WLAN_EID_EXT_ASSOC_DELAY_INFO = 1,
|
|
WLAN_EID_EXT_FILS_REQ_PARAMS = 2,
|
|
WLAN_EID_EXT_FILS_KEY_CONFIRM = 3,
|
|
WLAN_EID_EXT_FILS_SESSION = 4,
|
|
WLAN_EID_EXT_FILS_HLP_CONTAINER = 5,
|
|
WLAN_EID_EXT_FILS_IP_ADDR_ASSIGN = 6,
|
|
WLAN_EID_EXT_KEY_DELIVERY = 7,
|
|
WLAN_EID_EXT_FILS_WRAPPED_DATA = 8,
|
|
WLAN_EID_EXT_FILS_PUBLIC_KEY = 12,
|
|
WLAN_EID_EXT_FILS_NONCE = 13,
|
|
WLAN_EID_EXT_FUTURE_CHAN_GUIDANCE = 14,
|
|
WLAN_EID_EXT_HE_CAPABILITY = 35,
|
|
WLAN_EID_EXT_HE_OPERATION = 36,
|
|
WLAN_EID_EXT_UORA = 37,
|
|
WLAN_EID_EXT_HE_MU_EDCA = 38,
|
|
};
|
|
|
|
/* Action category code */
|
|
enum ieee80211_category {
|
|
WLAN_CATEGORY_SPECTRUM_MGMT = 0,
|
|
WLAN_CATEGORY_QOS = 1,
|
|
WLAN_CATEGORY_DLS = 2,
|
|
WLAN_CATEGORY_BACK = 3,
|
|
WLAN_CATEGORY_PUBLIC = 4,
|
|
WLAN_CATEGORY_RADIO_MEASUREMENT = 5,
|
|
WLAN_CATEGORY_HT = 7,
|
|
WLAN_CATEGORY_SA_QUERY = 8,
|
|
WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION = 9,
|
|
WLAN_CATEGORY_WNM = 10,
|
|
WLAN_CATEGORY_WNM_UNPROTECTED = 11,
|
|
WLAN_CATEGORY_TDLS = 12,
|
|
WLAN_CATEGORY_MESH_ACTION = 13,
|
|
WLAN_CATEGORY_MULTIHOP_ACTION = 14,
|
|
WLAN_CATEGORY_SELF_PROTECTED = 15,
|
|
WLAN_CATEGORY_DMG = 16,
|
|
WLAN_CATEGORY_WMM = 17,
|
|
WLAN_CATEGORY_FST = 18,
|
|
WLAN_CATEGORY_UNPROT_DMG = 20,
|
|
WLAN_CATEGORY_VHT = 21,
|
|
WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126,
|
|
WLAN_CATEGORY_VENDOR_SPECIFIC = 127,
|
|
};
|
|
|
|
/* SPECTRUM_MGMT action code */
|
|
enum ieee80211_spectrum_mgmt_actioncode {
|
|
WLAN_ACTION_SPCT_MSR_REQ = 0,
|
|
WLAN_ACTION_SPCT_MSR_RPRT = 1,
|
|
WLAN_ACTION_SPCT_TPC_REQ = 2,
|
|
WLAN_ACTION_SPCT_TPC_RPRT = 3,
|
|
WLAN_ACTION_SPCT_CHL_SWITCH = 4,
|
|
};
|
|
|
|
/* HT action codes */
|
|
enum ieee80211_ht_actioncode {
|
|
WLAN_HT_ACTION_NOTIFY_CHANWIDTH = 0,
|
|
WLAN_HT_ACTION_SMPS = 1,
|
|
WLAN_HT_ACTION_PSMP = 2,
|
|
WLAN_HT_ACTION_PCO_PHASE = 3,
|
|
WLAN_HT_ACTION_CSI = 4,
|
|
WLAN_HT_ACTION_NONCOMPRESSED_BF = 5,
|
|
WLAN_HT_ACTION_COMPRESSED_BF = 6,
|
|
WLAN_HT_ACTION_ASEL_IDX_FEEDBACK = 7,
|
|
};
|
|
|
|
/* VHT action codes */
|
|
enum ieee80211_vht_actioncode {
|
|
WLAN_VHT_ACTION_COMPRESSED_BF = 0,
|
|
WLAN_VHT_ACTION_GROUPID_MGMT = 1,
|
|
WLAN_VHT_ACTION_OPMODE_NOTIF = 2,
|
|
};
|
|
|
|
/* Self Protected Action codes */
|
|
enum ieee80211_self_protected_actioncode {
|
|
WLAN_SP_RESERVED = 0,
|
|
WLAN_SP_MESH_PEERING_OPEN = 1,
|
|
WLAN_SP_MESH_PEERING_CONFIRM = 2,
|
|
WLAN_SP_MESH_PEERING_CLOSE = 3,
|
|
WLAN_SP_MGK_INFORM = 4,
|
|
WLAN_SP_MGK_ACK = 5,
|
|
};
|
|
|
|
/* Mesh action codes */
|
|
enum ieee80211_mesh_actioncode {
|
|
WLAN_MESH_ACTION_LINK_METRIC_REPORT,
|
|
WLAN_MESH_ACTION_HWMP_PATH_SELECTION,
|
|
WLAN_MESH_ACTION_GATE_ANNOUNCEMENT,
|
|
WLAN_MESH_ACTION_CONGESTION_CONTROL_NOTIFICATION,
|
|
WLAN_MESH_ACTION_MCCA_SETUP_REQUEST,
|
|
WLAN_MESH_ACTION_MCCA_SETUP_REPLY,
|
|
WLAN_MESH_ACTION_MCCA_ADVERTISEMENT_REQUEST,
|
|
WLAN_MESH_ACTION_MCCA_ADVERTISEMENT,
|
|
WLAN_MESH_ACTION_MCCA_TEARDOWN,
|
|
WLAN_MESH_ACTION_TBTT_ADJUSTMENT_REQUEST,
|
|
WLAN_MESH_ACTION_TBTT_ADJUSTMENT_RESPONSE,
|
|
};
|
|
|
|
/* Security key length */
|
|
enum ieee80211_key_len {
|
|
WLAN_KEY_LEN_WEP40 = 5,
|
|
WLAN_KEY_LEN_WEP104 = 13,
|
|
WLAN_KEY_LEN_CCMP = 16,
|
|
WLAN_KEY_LEN_CCMP_256 = 32,
|
|
WLAN_KEY_LEN_TKIP = 32,
|
|
WLAN_KEY_LEN_AES_CMAC = 16,
|
|
WLAN_KEY_LEN_SMS4 = 32,
|
|
WLAN_KEY_LEN_GCMP = 16,
|
|
WLAN_KEY_LEN_GCMP_256 = 32,
|
|
WLAN_KEY_LEN_BIP_CMAC_256 = 32,
|
|
WLAN_KEY_LEN_BIP_GMAC_128 = 16,
|
|
WLAN_KEY_LEN_BIP_GMAC_256 = 32,
|
|
};
|
|
|
|
#define IEEE80211_WEP_IV_LEN 4
|
|
#define IEEE80211_WEP_ICV_LEN 4
|
|
#define IEEE80211_CCMP_HDR_LEN 8
|
|
#define IEEE80211_CCMP_MIC_LEN 8
|
|
#define IEEE80211_CCMP_PN_LEN 6
|
|
#define IEEE80211_CCMP_256_HDR_LEN 8
|
|
#define IEEE80211_CCMP_256_MIC_LEN 16
|
|
#define IEEE80211_CCMP_256_PN_LEN 6
|
|
#define IEEE80211_TKIP_IV_LEN 8
|
|
#define IEEE80211_TKIP_ICV_LEN 4
|
|
#define IEEE80211_CMAC_PN_LEN 6
|
|
#define IEEE80211_GMAC_PN_LEN 6
|
|
#define IEEE80211_GCMP_HDR_LEN 8
|
|
#define IEEE80211_GCMP_MIC_LEN 16
|
|
#define IEEE80211_GCMP_PN_LEN 6
|
|
|
|
#define FILS_NONCE_LEN 16
|
|
#define FILS_MAX_KEK_LEN 64
|
|
|
|
#define FILS_ERP_MAX_USERNAME_LEN 16
|
|
#define FILS_ERP_MAX_REALM_LEN 253
|
|
#define FILS_ERP_MAX_RRK_LEN 64
|
|
|
|
#define PMK_MAX_LEN 48
|
|
|
|
/* Public action codes (IEEE Std 802.11-2016, 9.6.8.1, Table 9-307) */
|
|
enum ieee80211_pub_actioncode {
|
|
WLAN_PUB_ACTION_20_40_BSS_COEX = 0,
|
|
WLAN_PUB_ACTION_DSE_ENABLEMENT = 1,
|
|
WLAN_PUB_ACTION_DSE_DEENABLEMENT = 2,
|
|
WLAN_PUB_ACTION_DSE_REG_LOC_ANN = 3,
|
|
WLAN_PUB_ACTION_EXT_CHANSW_ANN = 4,
|
|
WLAN_PUB_ACTION_DSE_MSMT_REQ = 5,
|
|
WLAN_PUB_ACTION_DSE_MSMT_RESP = 6,
|
|
WLAN_PUB_ACTION_MSMT_PILOT = 7,
|
|
WLAN_PUB_ACTION_DSE_PC = 8,
|
|
WLAN_PUB_ACTION_VENDOR_SPECIFIC = 9,
|
|
WLAN_PUB_ACTION_GAS_INITIAL_REQ = 10,
|
|
WLAN_PUB_ACTION_GAS_INITIAL_RESP = 11,
|
|
WLAN_PUB_ACTION_GAS_COMEBACK_REQ = 12,
|
|
WLAN_PUB_ACTION_GAS_COMEBACK_RESP = 13,
|
|
WLAN_PUB_ACTION_TDLS_DISCOVER_RES = 14,
|
|
WLAN_PUB_ACTION_LOC_TRACK_NOTI = 15,
|
|
WLAN_PUB_ACTION_QAB_REQUEST_FRAME = 16,
|
|
WLAN_PUB_ACTION_QAB_RESPONSE_FRAME = 17,
|
|
WLAN_PUB_ACTION_QMF_POLICY = 18,
|
|
WLAN_PUB_ACTION_QMF_POLICY_CHANGE = 19,
|
|
WLAN_PUB_ACTION_QLOAD_REQUEST = 20,
|
|
WLAN_PUB_ACTION_QLOAD_REPORT = 21,
|
|
WLAN_PUB_ACTION_HCCA_TXOP_ADVERT = 22,
|
|
WLAN_PUB_ACTION_HCCA_TXOP_RESPONSE = 23,
|
|
WLAN_PUB_ACTION_PUBLIC_KEY = 24,
|
|
WLAN_PUB_ACTION_CHANNEL_AVAIL_QUERY = 25,
|
|
WLAN_PUB_ACTION_CHANNEL_SCHEDULE_MGMT = 26,
|
|
WLAN_PUB_ACTION_CONTACT_VERI_SIGNAL = 27,
|
|
WLAN_PUB_ACTION_GDD_ENABLEMENT_REQ = 28,
|
|
WLAN_PUB_ACTION_GDD_ENABLEMENT_RESP = 29,
|
|
WLAN_PUB_ACTION_NETWORK_CHANNEL_CONTROL = 30,
|
|
WLAN_PUB_ACTION_WHITE_SPACE_MAP_ANN = 31,
|
|
WLAN_PUB_ACTION_FTM_REQUEST = 32,
|
|
WLAN_PUB_ACTION_FTM = 33,
|
|
WLAN_PUB_ACTION_FILS_DISCOVERY = 34,
|
|
};
|
|
|
|
/* TDLS action codes */
|
|
enum ieee80211_tdls_actioncode {
|
|
WLAN_TDLS_SETUP_REQUEST = 0,
|
|
WLAN_TDLS_SETUP_RESPONSE = 1,
|
|
WLAN_TDLS_SETUP_CONFIRM = 2,
|
|
WLAN_TDLS_TEARDOWN = 3,
|
|
WLAN_TDLS_PEER_TRAFFIC_INDICATION = 4,
|
|
WLAN_TDLS_CHANNEL_SWITCH_REQUEST = 5,
|
|
WLAN_TDLS_CHANNEL_SWITCH_RESPONSE = 6,
|
|
WLAN_TDLS_PEER_PSM_REQUEST = 7,
|
|
WLAN_TDLS_PEER_PSM_RESPONSE = 8,
|
|
WLAN_TDLS_PEER_TRAFFIC_RESPONSE = 9,
|
|
WLAN_TDLS_DISCOVERY_REQUEST = 10,
|
|
};
|
|
|
|
/* Extended Channel Switching capability to be set in the 1st byte of
|
|
* the @WLAN_EID_EXT_CAPABILITY information element
|
|
*/
|
|
#define WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING BIT(2)
|
|
|
|
/* TDLS capabilities in the the 4th byte of @WLAN_EID_EXT_CAPABILITY */
|
|
#define WLAN_EXT_CAPA4_TDLS_BUFFER_STA BIT(4)
|
|
#define WLAN_EXT_CAPA4_TDLS_PEER_PSM BIT(5)
|
|
#define WLAN_EXT_CAPA4_TDLS_CHAN_SWITCH BIT(6)
|
|
|
|
/* Interworking capabilities are set in 7th bit of 4th byte of the
|
|
* @WLAN_EID_EXT_CAPABILITY information element
|
|
*/
|
|
#define WLAN_EXT_CAPA4_INTERWORKING_ENABLED BIT(7)
|
|
|
|
/*
|
|
* TDLS capabililites to be enabled in the 5th byte of the
|
|
* @WLAN_EID_EXT_CAPABILITY information element
|
|
*/
|
|
#define WLAN_EXT_CAPA5_TDLS_ENABLED BIT(5)
|
|
#define WLAN_EXT_CAPA5_TDLS_PROHIBITED BIT(6)
|
|
#define WLAN_EXT_CAPA5_TDLS_CH_SW_PROHIBITED BIT(7)
|
|
|
|
#define WLAN_EXT_CAPA8_TDLS_WIDE_BW_ENABLED BIT(5)
|
|
#define WLAN_EXT_CAPA8_OPMODE_NOTIF BIT(6)
|
|
|
|
/* Defines the maximal number of MSDUs in an A-MSDU. */
|
|
#define WLAN_EXT_CAPA8_MAX_MSDU_IN_AMSDU_LSB BIT(7)
|
|
#define WLAN_EXT_CAPA9_MAX_MSDU_IN_AMSDU_MSB BIT(0)
|
|
|
|
/*
|
|
* Fine Timing Measurement Initiator - bit 71 of @WLAN_EID_EXT_CAPABILITY
|
|
* information element
|
|
*/
|
|
#define WLAN_EXT_CAPA9_FTM_INITIATOR BIT(7)
|
|
|
|
/* TDLS specific payload type in the LLC/SNAP header */
|
|
#define WLAN_TDLS_SNAP_RFTYPE 0x2
|
|
|
|
/* BSS Coex IE information field bits */
|
|
#define WLAN_BSS_COEX_INFORMATION_REQUEST BIT(0)
|
|
|
|
/**
|
|
* enum ieee80211_mesh_sync_method - mesh synchronization method identifier
|
|
*
|
|
* @IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET: the default synchronization method
|
|
* @IEEE80211_SYNC_METHOD_VENDOR: a vendor specific synchronization method
|
|
* that will be specified in a vendor specific information element
|
|
*/
|
|
enum ieee80211_mesh_sync_method {
|
|
IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET = 1,
|
|
IEEE80211_SYNC_METHOD_VENDOR = 255,
|
|
};
|
|
|
|
/**
|
|
* enum ieee80211_mesh_path_protocol - mesh path selection protocol identifier
|
|
*
|
|
* @IEEE80211_PATH_PROTOCOL_HWMP: the default path selection protocol
|
|
* @IEEE80211_PATH_PROTOCOL_VENDOR: a vendor specific protocol that will
|
|
* be specified in a vendor specific information element
|
|
*/
|
|
enum ieee80211_mesh_path_protocol {
|
|
IEEE80211_PATH_PROTOCOL_HWMP = 1,
|
|
IEEE80211_PATH_PROTOCOL_VENDOR = 255,
|
|
};
|
|
|
|
/**
|
|
* enum ieee80211_mesh_path_metric - mesh path selection metric identifier
|
|
*
|
|
* @IEEE80211_PATH_METRIC_AIRTIME: the default path selection metric
|
|
* @IEEE80211_PATH_METRIC_VENDOR: a vendor specific metric that will be
|
|
* specified in a vendor specific information element
|
|
*/
|
|
enum ieee80211_mesh_path_metric {
|
|
IEEE80211_PATH_METRIC_AIRTIME = 1,
|
|
IEEE80211_PATH_METRIC_VENDOR = 255,
|
|
};
|
|
|
|
/**
|
|
* enum ieee80211_root_mode_identifier - root mesh STA mode identifier
|
|
*
|
|
* These attribute are used by dot11MeshHWMPRootMode to set root mesh STA mode
|
|
*
|
|
* @IEEE80211_ROOTMODE_NO_ROOT: the mesh STA is not a root mesh STA (default)
|
|
* @IEEE80211_ROOTMODE_ROOT: the mesh STA is a root mesh STA if greater than
|
|
* this value
|
|
* @IEEE80211_PROACTIVE_PREQ_NO_PREP: the mesh STA is a root mesh STA supports
|
|
* the proactive PREQ with proactive PREP subfield set to 0
|
|
* @IEEE80211_PROACTIVE_PREQ_WITH_PREP: the mesh STA is a root mesh STA
|
|
* supports the proactive PREQ with proactive PREP subfield set to 1
|
|
* @IEEE80211_PROACTIVE_RANN: the mesh STA is a root mesh STA supports
|
|
* the proactive RANN
|
|
*/
|
|
enum ieee80211_root_mode_identifier {
|
|
IEEE80211_ROOTMODE_NO_ROOT = 0,
|
|
IEEE80211_ROOTMODE_ROOT = 1,
|
|
IEEE80211_PROACTIVE_PREQ_NO_PREP = 2,
|
|
IEEE80211_PROACTIVE_PREQ_WITH_PREP = 3,
|
|
IEEE80211_PROACTIVE_RANN = 4,
|
|
};
|
|
|
|
/*
|
|
* IEEE 802.11-2007 7.3.2.9 Country information element
|
|
*
|
|
* Minimum length is 8 octets, ie len must be evenly
|
|
* divisible by 2
|
|
*/
|
|
|
|
/* Although the spec says 8 I'm seeing 6 in practice */
|
|
#define IEEE80211_COUNTRY_IE_MIN_LEN 6
|
|
|
|
/* The Country String field of the element shall be 3 octets in length */
|
|
#define IEEE80211_COUNTRY_STRING_LEN 3
|
|
|
|
/*
|
|
* For regulatory extension stuff see IEEE 802.11-2007
|
|
* Annex I (page 1141) and Annex J (page 1147). Also
|
|
* review 7.3.2.9.
|
|
*
|
|
* When dot11RegulatoryClassesRequired is true and the
|
|
* first_channel/reg_extension_id is >= 201 then the IE
|
|
* compromises of the 'ext' struct represented below:
|
|
*
|
|
* - Regulatory extension ID - when generating IE this just needs
|
|
* to be monotonically increasing for each triplet passed in
|
|
* the IE
|
|
* - Regulatory class - index into set of rules
|
|
* - Coverage class - index into air propagation time (Table 7-27),
|
|
* in microseconds, you can compute the air propagation time from
|
|
* the index by multiplying by 3, so index 10 yields a propagation
|
|
* of 10 us. Valid values are 0-31, values 32-255 are not defined
|
|
* yet. A value of 0 inicates air propagation of <= 1 us.
|
|
*
|
|
* See also Table I.2 for Emission limit sets and table
|
|
* I.3 for Behavior limit sets. Table J.1 indicates how to map
|
|
* a reg_class to an emission limit set and behavior limit set.
|
|
*/
|
|
#define IEEE80211_COUNTRY_EXTENSION_ID 201
|
|
|
|
/*
|
|
* Channels numbers in the IE must be monotonically increasing
|
|
* if dot11RegulatoryClassesRequired is not true.
|
|
*
|
|
* If dot11RegulatoryClassesRequired is true consecutive
|
|
* subband triplets following a regulatory triplet shall
|
|
* have monotonically increasing first_channel number fields.
|
|
*
|
|
* Channel numbers shall not overlap.
|
|
*
|
|
* Note that max_power is signed.
|
|
*/
|
|
struct ieee80211_country_ie_triplet {
|
|
union {
|
|
struct {
|
|
u8 first_channel;
|
|
u8 num_channels;
|
|
s8 max_power;
|
|
} __packed chans;
|
|
struct {
|
|
u8 reg_extension_id;
|
|
u8 reg_class;
|
|
u8 coverage_class;
|
|
} __packed ext;
|
|
};
|
|
} __packed;
|
|
|
|
enum ieee80211_timeout_interval_type {
|
|
WLAN_TIMEOUT_REASSOC_DEADLINE = 1 /* 802.11r */,
|
|
WLAN_TIMEOUT_KEY_LIFETIME = 2 /* 802.11r */,
|
|
WLAN_TIMEOUT_ASSOC_COMEBACK = 3 /* 802.11w */,
|
|
};
|
|
|
|
/**
|
|
* struct ieee80211_timeout_interval_ie - Timeout Interval element
|
|
* @type: type, see &enum ieee80211_timeout_interval_type
|
|
* @value: timeout interval value
|
|
*/
|
|
struct ieee80211_timeout_interval_ie {
|
|
u8 type;
|
|
__le32 value;
|
|
} __packed;
|
|
|
|
/**
|
|
* enum ieee80211_idle_options - BSS idle options
|
|
* @WLAN_IDLE_OPTIONS_PROTECTED_KEEP_ALIVE: the station should send an RSN
|
|
* protected frame to the AP to reset the idle timer at the AP for
|
|
* the station.
|
|
*/
|
|
enum ieee80211_idle_options {
|
|
WLAN_IDLE_OPTIONS_PROTECTED_KEEP_ALIVE = BIT(0),
|
|
};
|
|
|
|
/**
|
|
* struct ieee80211_bss_max_idle_period_ie
|
|
*
|
|
* This structure refers to "BSS Max idle period element"
|
|
*
|
|
* @max_idle_period: indicates the time period during which a station can
|
|
* refrain from transmitting frames to its associated AP without being
|
|
* disassociated. In units of 1000 TUs.
|
|
* @idle_options: indicates the options associated with the BSS idle capability
|
|
* as specified in &enum ieee80211_idle_options.
|
|
*/
|
|
struct ieee80211_bss_max_idle_period_ie {
|
|
__le16 max_idle_period;
|
|
u8 idle_options;
|
|
} __packed;
|
|
|
|
/* BACK action code */
|
|
enum ieee80211_back_actioncode {
|
|
WLAN_ACTION_ADDBA_REQ = 0,
|
|
WLAN_ACTION_ADDBA_RESP = 1,
|
|
WLAN_ACTION_DELBA = 2,
|
|
};
|
|
|
|
/* BACK (block-ack) parties */
|
|
enum ieee80211_back_parties {
|
|
WLAN_BACK_RECIPIENT = 0,
|
|
WLAN_BACK_INITIATOR = 1,
|
|
};
|
|
|
|
/* SA Query action */
|
|
enum ieee80211_sa_query_action {
|
|
WLAN_ACTION_SA_QUERY_REQUEST = 0,
|
|
WLAN_ACTION_SA_QUERY_RESPONSE = 1,
|
|
};
|
|
|
|
|
|
#define SUITE(oui, id) (((oui) << 8) | (id))
|
|
|
|
/* cipher suite selectors */
|
|
#define WLAN_CIPHER_SUITE_USE_GROUP SUITE(0x000FAC, 0)
|
|
#define WLAN_CIPHER_SUITE_WEP40 SUITE(0x000FAC, 1)
|
|
#define WLAN_CIPHER_SUITE_TKIP SUITE(0x000FAC, 2)
|
|
/* reserved: SUITE(0x000FAC, 3) */
|
|
#define WLAN_CIPHER_SUITE_CCMP SUITE(0x000FAC, 4)
|
|
#define WLAN_CIPHER_SUITE_WEP104 SUITE(0x000FAC, 5)
|
|
#define WLAN_CIPHER_SUITE_AES_CMAC SUITE(0x000FAC, 6)
|
|
#define WLAN_CIPHER_SUITE_GCMP SUITE(0x000FAC, 8)
|
|
#define WLAN_CIPHER_SUITE_GCMP_256 SUITE(0x000FAC, 9)
|
|
#define WLAN_CIPHER_SUITE_CCMP_256 SUITE(0x000FAC, 10)
|
|
#define WLAN_CIPHER_SUITE_BIP_GMAC_128 SUITE(0x000FAC, 11)
|
|
#define WLAN_CIPHER_SUITE_BIP_GMAC_256 SUITE(0x000FAC, 12)
|
|
#define WLAN_CIPHER_SUITE_BIP_CMAC_256 SUITE(0x000FAC, 13)
|
|
|
|
#define WLAN_CIPHER_SUITE_SMS4 SUITE(0x001472, 1)
|
|
|
|
/* AKM suite selectors */
|
|
#define WLAN_AKM_SUITE_8021X SUITE(0x000FAC, 1)
|
|
#define WLAN_AKM_SUITE_PSK SUITE(0x000FAC, 2)
|
|
#define WLAN_AKM_SUITE_FT_8021X SUITE(0x000FAC, 3)
|
|
#define WLAN_AKM_SUITE_FT_PSK SUITE(0x000FAC, 4)
|
|
#define WLAN_AKM_SUITE_8021X_SHA256 SUITE(0x000FAC, 5)
|
|
#define WLAN_AKM_SUITE_PSK_SHA256 SUITE(0x000FAC, 6)
|
|
#define WLAN_AKM_SUITE_TDLS SUITE(0x000FAC, 7)
|
|
#define WLAN_AKM_SUITE_SAE SUITE(0x000FAC, 8)
|
|
#define WLAN_AKM_SUITE_FT_OVER_SAE SUITE(0x000FAC, 9)
|
|
#define WLAN_AKM_SUITE_8021X_SUITE_B SUITE(0x000FAC, 11)
|
|
#define WLAN_AKM_SUITE_8021X_SUITE_B_192 SUITE(0x000FAC, 12)
|
|
#define WLAN_AKM_SUITE_FILS_SHA256 SUITE(0x000FAC, 14)
|
|
#define WLAN_AKM_SUITE_FILS_SHA384 SUITE(0x000FAC, 15)
|
|
#define WLAN_AKM_SUITE_FT_FILS_SHA256 SUITE(0x000FAC, 16)
|
|
#define WLAN_AKM_SUITE_FT_FILS_SHA384 SUITE(0x000FAC, 17)
|
|
|
|
#define WLAN_MAX_KEY_LEN 32
|
|
|
|
#define WLAN_PMK_NAME_LEN 16
|
|
#define WLAN_PMKID_LEN 16
|
|
#define WLAN_PMK_LEN_EAP_LEAP 16
|
|
#define WLAN_PMK_LEN 32
|
|
#define WLAN_PMK_LEN_SUITE_B_192 48
|
|
|
|
#define WLAN_OUI_WFA 0x506f9a
|
|
#define WLAN_OUI_TYPE_WFA_P2P 9
|
|
#define WLAN_OUI_MICROSOFT 0x0050f2
|
|
#define WLAN_OUI_TYPE_MICROSOFT_WPA 1
|
|
#define WLAN_OUI_TYPE_MICROSOFT_WMM 2
|
|
#define WLAN_OUI_TYPE_MICROSOFT_WPS 4
|
|
|
|
/*
|
|
* WMM/802.11e Tspec Element
|
|
*/
|
|
#define IEEE80211_WMM_IE_TSPEC_TID_MASK 0x0F
|
|
#define IEEE80211_WMM_IE_TSPEC_TID_SHIFT 1
|
|
|
|
enum ieee80211_tspec_status_code {
|
|
IEEE80211_TSPEC_STATUS_ADMISS_ACCEPTED = 0,
|
|
IEEE80211_TSPEC_STATUS_ADDTS_INVAL_PARAMS = 0x1,
|
|
};
|
|
|
|
struct ieee80211_tspec_ie {
|
|
u8 element_id;
|
|
u8 len;
|
|
u8 oui[3];
|
|
u8 oui_type;
|
|
u8 oui_subtype;
|
|
u8 version;
|
|
__le16 tsinfo;
|
|
u8 tsinfo_resvd;
|
|
__le16 nominal_msdu;
|
|
__le16 max_msdu;
|
|
__le32 min_service_int;
|
|
__le32 max_service_int;
|
|
__le32 inactivity_int;
|
|
__le32 suspension_int;
|
|
__le32 service_start_time;
|
|
__le32 min_data_rate;
|
|
__le32 mean_data_rate;
|
|
__le32 peak_data_rate;
|
|
__le32 max_burst_size;
|
|
__le32 delay_bound;
|
|
__le32 min_phy_rate;
|
|
__le16 sba;
|
|
__le16 medium_time;
|
|
} __packed;
|
|
|
|
/**
|
|
* ieee80211_get_qos_ctl - get pointer to qos control bytes
|
|
* @hdr: the frame
|
|
*
|
|
* The qos ctrl bytes come after the frame_control, duration, seq_num
|
|
* and 3 or 4 addresses of length ETH_ALEN.
|
|
* 3 addr: 2 + 2 + 2 + 3*6 = 24
|
|
* 4 addr: 2 + 2 + 2 + 4*6 = 30
|
|
*/
|
|
static inline u8 *ieee80211_get_qos_ctl(struct ieee80211_hdr *hdr)
|
|
{
|
|
if (ieee80211_has_a4(hdr->frame_control))
|
|
return (u8 *)hdr + 30;
|
|
else
|
|
return (u8 *)hdr + 24;
|
|
}
|
|
|
|
/**
|
|
* ieee80211_get_SA - get pointer to SA
|
|
* @hdr: the frame
|
|
*
|
|
* Given an 802.11 frame, this function returns the offset
|
|
* to the source address (SA). It does not verify that the
|
|
* header is long enough to contain the address, and the
|
|
* header must be long enough to contain the frame control
|
|
* field.
|
|
*/
|
|
static inline u8 *ieee80211_get_SA(struct ieee80211_hdr *hdr)
|
|
{
|
|
if (ieee80211_has_a4(hdr->frame_control))
|
|
return hdr->addr4;
|
|
if (ieee80211_has_fromds(hdr->frame_control))
|
|
return hdr->addr3;
|
|
return hdr->addr2;
|
|
}
|
|
|
|
/**
|
|
* ieee80211_get_DA - get pointer to DA
|
|
* @hdr: the frame
|
|
*
|
|
* Given an 802.11 frame, this function returns the offset
|
|
* to the destination address (DA). It does not verify that
|
|
* the header is long enough to contain the address, and the
|
|
* header must be long enough to contain the frame control
|
|
* field.
|
|
*/
|
|
static inline u8 *ieee80211_get_DA(struct ieee80211_hdr *hdr)
|
|
{
|
|
if (ieee80211_has_tods(hdr->frame_control))
|
|
return hdr->addr3;
|
|
else
|
|
return hdr->addr1;
|
|
}
|
|
|
|
/**
|
|
* _ieee80211_is_robust_mgmt_frame - check if frame is a robust management frame
|
|
* @hdr: the frame (buffer must include at least the first octet of payload)
|
|
*/
|
|
static inline bool _ieee80211_is_robust_mgmt_frame(struct ieee80211_hdr *hdr)
|
|
{
|
|
if (ieee80211_is_disassoc(hdr->frame_control) ||
|
|
ieee80211_is_deauth(hdr->frame_control))
|
|
return true;
|
|
|
|
if (ieee80211_is_action(hdr->frame_control)) {
|
|
u8 *category;
|
|
|
|
/*
|
|
* Action frames, excluding Public Action frames, are Robust
|
|
* Management Frames. However, if we are looking at a Protected
|
|
* frame, skip the check since the data may be encrypted and
|
|
* the frame has already been found to be a Robust Management
|
|
* Frame (by the other end).
|
|
*/
|
|
if (ieee80211_has_protected(hdr->frame_control))
|
|
return true;
|
|
category = ((u8 *) hdr) + 24;
|
|
return *category != WLAN_CATEGORY_PUBLIC &&
|
|
*category != WLAN_CATEGORY_HT &&
|
|
*category != WLAN_CATEGORY_WNM_UNPROTECTED &&
|
|
*category != WLAN_CATEGORY_SELF_PROTECTED &&
|
|
*category != WLAN_CATEGORY_UNPROT_DMG &&
|
|
*category != WLAN_CATEGORY_VHT &&
|
|
*category != WLAN_CATEGORY_VENDOR_SPECIFIC;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_robust_mgmt_frame - check if skb contains a robust mgmt frame
|
|
* @skb: the skb containing the frame, length will be checked
|
|
*/
|
|
static inline bool ieee80211_is_robust_mgmt_frame(struct sk_buff *skb)
|
|
{
|
|
if (skb->len < IEEE80211_MIN_ACTION_SIZE)
|
|
return false;
|
|
return _ieee80211_is_robust_mgmt_frame((void *)skb->data);
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_public_action - check if frame is a public action frame
|
|
* @hdr: the frame
|
|
* @len: length of the frame
|
|
*/
|
|
static inline bool ieee80211_is_public_action(struct ieee80211_hdr *hdr,
|
|
size_t len)
|
|
{
|
|
struct ieee80211_mgmt *mgmt = (void *)hdr;
|
|
|
|
if (len < IEEE80211_MIN_ACTION_SIZE)
|
|
return false;
|
|
if (!ieee80211_is_action(hdr->frame_control))
|
|
return false;
|
|
return mgmt->u.action.category == WLAN_CATEGORY_PUBLIC;
|
|
}
|
|
|
|
/**
|
|
* _ieee80211_is_group_privacy_action - check if frame is a group addressed
|
|
* privacy action frame
|
|
* @hdr: the frame
|
|
*/
|
|
static inline bool _ieee80211_is_group_privacy_action(struct ieee80211_hdr *hdr)
|
|
{
|
|
struct ieee80211_mgmt *mgmt = (void *)hdr;
|
|
|
|
if (!ieee80211_is_action(hdr->frame_control) ||
|
|
!is_multicast_ether_addr(hdr->addr1))
|
|
return false;
|
|
|
|
return mgmt->u.action.category == WLAN_CATEGORY_MESH_ACTION ||
|
|
mgmt->u.action.category == WLAN_CATEGORY_MULTIHOP_ACTION;
|
|
}
|
|
|
|
/**
|
|
* ieee80211_is_group_privacy_action - check if frame is a group addressed
|
|
* privacy action frame
|
|
* @skb: the skb containing the frame, length will be checked
|
|
*/
|
|
static inline bool ieee80211_is_group_privacy_action(struct sk_buff *skb)
|
|
{
|
|
if (skb->len < IEEE80211_MIN_ACTION_SIZE)
|
|
return false;
|
|
return _ieee80211_is_group_privacy_action((void *)skb->data);
|
|
}
|
|
|
|
/**
|
|
* ieee80211_tu_to_usec - convert time units (TU) to microseconds
|
|
* @tu: the TUs
|
|
*/
|
|
static inline unsigned long ieee80211_tu_to_usec(unsigned long tu)
|
|
{
|
|
return 1024 * tu;
|
|
}
|
|
|
|
/**
|
|
* ieee80211_check_tim - check if AID bit is set in TIM
|
|
* @tim: the TIM IE
|
|
* @tim_len: length of the TIM IE
|
|
* @aid: the AID to look for
|
|
*/
|
|
static inline bool ieee80211_check_tim(const struct ieee80211_tim_ie *tim,
|
|
u8 tim_len, u16 aid)
|
|
{
|
|
u8 mask;
|
|
u8 index, indexn1, indexn2;
|
|
|
|
if (unlikely(!tim || tim_len < sizeof(*tim)))
|
|
return false;
|
|
|
|
aid &= 0x3fff;
|
|
index = aid / 8;
|
|
mask = 1 << (aid & 7);
|
|
|
|
indexn1 = tim->bitmap_ctrl & 0xfe;
|
|
indexn2 = tim_len + indexn1 - 4;
|
|
|
|
if (index < indexn1 || index > indexn2)
|
|
return false;
|
|
|
|
index -= indexn1;
|
|
|
|
return !!(tim->virtual_map[index] & mask);
|
|
}
|
|
|
|
/**
|
|
* ieee80211_get_tdls_action - get tdls packet action (or -1, if not tdls packet)
|
|
* @skb: the skb containing the frame, length will not be checked
|
|
* @hdr_size: the size of the ieee80211_hdr that starts at skb->data
|
|
*
|
|
* This function assumes the frame is a data frame, and that the network header
|
|
* is in the correct place.
|
|
*/
|
|
static inline int ieee80211_get_tdls_action(struct sk_buff *skb, u32 hdr_size)
|
|
{
|
|
if (!skb_is_nonlinear(skb) &&
|
|
skb->len > (skb_network_offset(skb) + 2)) {
|
|
/* Point to where the indication of TDLS should start */
|
|
const u8 *tdls_data = skb_network_header(skb) - 2;
|
|
|
|
if (get_unaligned_be16(tdls_data) == ETH_P_TDLS &&
|
|
tdls_data[2] == WLAN_TDLS_SNAP_RFTYPE &&
|
|
tdls_data[3] == WLAN_CATEGORY_TDLS)
|
|
return tdls_data[4];
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
/* convert time units */
|
|
#define TU_TO_JIFFIES(x) (usecs_to_jiffies((x) * 1024))
|
|
#define TU_TO_EXP_TIME(x) (jiffies + TU_TO_JIFFIES(x))
|
|
|
|
/**
|
|
* ieee80211_action_contains_tpc - checks if the frame contains TPC element
|
|
* @skb: the skb containing the frame, length will be checked
|
|
*
|
|
* This function checks if it's either TPC report action frame or Link
|
|
* Measurement report action frame as defined in IEEE Std. 802.11-2012 8.5.2.5
|
|
* and 8.5.7.5 accordingly.
|
|
*/
|
|
static inline bool ieee80211_action_contains_tpc(struct sk_buff *skb)
|
|
{
|
|
struct ieee80211_mgmt *mgmt = (void *)skb->data;
|
|
|
|
if (!ieee80211_is_action(mgmt->frame_control))
|
|
return false;
|
|
|
|
if (skb->len < IEEE80211_MIN_ACTION_SIZE +
|
|
sizeof(mgmt->u.action.u.tpc_report))
|
|
return false;
|
|
|
|
/*
|
|
* TPC report - check that:
|
|
* category = 0 (Spectrum Management) or 5 (Radio Measurement)
|
|
* spectrum management action = 3 (TPC/Link Measurement report)
|
|
* TPC report EID = 35
|
|
* TPC report element length = 2
|
|
*
|
|
* The spectrum management's tpc_report struct is used here both for
|
|
* parsing tpc_report and radio measurement's link measurement report
|
|
* frame, since the relevant part is identical in both frames.
|
|
*/
|
|
if (mgmt->u.action.category != WLAN_CATEGORY_SPECTRUM_MGMT &&
|
|
mgmt->u.action.category != WLAN_CATEGORY_RADIO_MEASUREMENT)
|
|
return false;
|
|
|
|
/* both spectrum mgmt and link measurement have same action code */
|
|
if (mgmt->u.action.u.tpc_report.action_code !=
|
|
WLAN_ACTION_SPCT_TPC_RPRT)
|
|
return false;
|
|
|
|
if (mgmt->u.action.u.tpc_report.tpc_elem_id != WLAN_EID_TPC_REPORT ||
|
|
mgmt->u.action.u.tpc_report.tpc_elem_length !=
|
|
sizeof(struct ieee80211_tpc_report_ie))
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
struct element {
|
|
u8 id;
|
|
u8 datalen;
|
|
u8 data[];
|
|
} __packed;
|
|
|
|
/* element iteration helpers */
|
|
#define for_each_element(_elem, _data, _datalen) \
|
|
for (_elem = (const struct element *)(_data); \
|
|
(const u8 *)(_data) + (_datalen) - (const u8 *)_elem >= \
|
|
(int)sizeof(*_elem) && \
|
|
(const u8 *)(_data) + (_datalen) - (const u8 *)_elem >= \
|
|
(int)sizeof(*_elem) + _elem->datalen; \
|
|
_elem = (const struct element *)(_elem->data + _elem->datalen))
|
|
|
|
#define for_each_element_id(element, _id, data, datalen) \
|
|
for_each_element(element, data, datalen) \
|
|
if (element->id == (_id))
|
|
|
|
#define for_each_element_extid(element, extid, data, datalen) \
|
|
for_each_element(element, data, datalen) \
|
|
if (element->id == WLAN_EID_EXTENSION && \
|
|
element->datalen > 0 && \
|
|
element->data[0] == (extid))
|
|
|
|
#define for_each_subelement(sub, element) \
|
|
for_each_element(sub, (element)->data, (element)->datalen)
|
|
|
|
#define for_each_subelement_id(sub, id, element) \
|
|
for_each_element_id(sub, id, (element)->data, (element)->datalen)
|
|
|
|
#define for_each_subelement_extid(sub, extid, element) \
|
|
for_each_element_extid(sub, extid, (element)->data, (element)->datalen)
|
|
|
|
/**
|
|
* for_each_element_completed - determine if element parsing consumed all data
|
|
* @element: element pointer after for_each_element() or friends
|
|
* @data: same data pointer as passed to for_each_element() or friends
|
|
* @datalen: same data length as passed to for_each_element() or friends
|
|
*
|
|
* This function returns %true if all the data was parsed or considered
|
|
* while walking the elements. Only use this if your for_each_element()
|
|
* loop cannot be broken out of, otherwise it always returns %false.
|
|
*
|
|
* If some data was malformed, this returns %false since the last parsed
|
|
* element will not fill the whole remaining data.
|
|
*/
|
|
static inline bool for_each_element_completed(const struct element *element,
|
|
const void *data, size_t datalen)
|
|
{
|
|
return (const u8 *)element == (const u8 *)data + datalen;
|
|
}
|
|
|
|
#endif /* LINUX_IEEE80211_H */
|