"LV.AU.0.1.0.r1-11000-gen3meta.0"
* tag 'LV.AU.0.1.0.r1-11000-gen3meta.0' of https://source.codeaurora.org/quic/la/kernel/msm-4.14:
ARM: dts: msm: multi-card for SA6155/SA8155/SA8195
early init: adjust early devices for 8195
ARM: dts: qcom: Add device nodes for second AFE rx and proxy tx devices
msm: ais: define early init for camera
msm: ais: fix cci read return value issue
ARM: dts: msm: remove default SA6155 DP pinctrl
init: define early init functions for display subsystem
msm: adsprpc: Fix array index underflow problem
init: support early init framework
msm: ais: fix csid fatal error issue
ARM: dts: msm: add support of DP PHY bond mode for SA8195p
ARM: dts: msm: added 2nd DP and eDP for SA8195p
ARM: dts: msm: revert 2nd DP and eDP related DT modification
drm/msm/sde: Add data structure for ROI MISR
Revert "ARM: dts: msm: remove 2nd DP and eDP from sa8195p"
ARM: dts: msm: include correct dtsi for sa8195p-v2-adp-air-overlay.dts
arm64: Allow boot on cpus other than logical cpu 0
init: use unbound instead of highpriority wq in early init
init: support early init on SA8195
diag: Add protection while accessing diag client map
Revert "ARM: dts: msm: Enabling dynamic splash on DSI and DP displays (sa8195)"
drm/msm/shd: Update topology name in shd atomic check
Set req_id in trigger notify and slot increment
ARM: dts: msm: Enabling dynamic splash on DSI and DP displays (sa8195)
drm/msm/sde: Move roi number check to atomic_check stage
drm/msm/shd: Fix can't register irq of roi misr
net: stmmac: use correct header type
dtsi: SA8155: Early ethernet changes
defconfig: SA8155: Enable ebtables vlan filters
ARM: dts: msm: Add roi misr register address for sm6150
ARM: dts: msm: Add roi misr register address for sdmshrike
ARM: dts: msm: Add roi misr register address for sm8150
drm/msm/sde: add roi misr support
drm/msm/sde: skip rsc client creation for external encoders
init: define early init functions for camera subsystem
drm/msm/dsi-staging: add support for output CSI-2 compatible stream
drm/msm/dsi-staging: add missing RGB color re-order
drm/msm/shd: fix null pointer during pm_suspend
msm/shd: Resolve conflictions in HEAD
mm/free_area_init_core: skip memmap_init for holes
drm/msm: add boot marker
init: move more subsystems into early init framework
init: define early init functions for display subsystem
init: define early devices needed by all subsystems
init: support early userspace
init: define early init functions for rootfs mounting
init: define early init functions needed by all subsystems
init: add new early param and define early initcall macros
arm: dts: msm: switch to 8 channel ubwc for sdmshrike GPU
ARM: dts: msm: update macro tile mode for sdmshrike display
msm: kgsl: Add macrotiling channels property
initialize the return value to 0 for irq request
msm: ais: handle timestamp for each RDI of IFE
drm/msm/sde: fix LM split index for single LM case
drm/msm/shd: add quad lm support to shared display
drm/msm-lease: add 32bit ioctl support for msm lease
drm/msm-lease: fix potential racing condition for msm lease
drm/msm/shd: populate base topology for shared virtual display
drm/msm/shd: wait additional vsync when all planes are detached
defconfig: sdmshrike: Enable config for dyn splash
drm/msm/sde: add plane layout check and global coordinate support
drm/msm/sde: add num_mixers in sde_crtc_state
drm/msm/sde: fix plane sorting with layout set
drm/msm/dp: accumulated fixes from dev branch
drm/msm/sde: add topology_name in crtc state
drm/msm/sde: set pipes per stage to 4 to support quad lm
ARM: dts: msm: add support of DP PHY bond mode for SA8195p
drm/msm/dp: add DP PHY bond mode support
clk/qcom/mdss: added PHY bond mode for 7nm DP/USB PHY
ARM: dts: msm: added 2nd DP and eDP for SA8195p
clk/qcom/mdss: added secondary DP/USB PHY PLL support
drm/msm/dp: added 7nm eDP/DP PHY 5.0.0 support
clk/qcom/mdss: added 7nm eDP/DP PHY support
drm/msm/dp: add multiple DP instances support for DP/USB combo PHY
drm/msm/dp: add force bond mode for dp-sst
drm/msm/dp: add bond tiled mode support
drm/msm/dp: add support to multiple dp instances
drm/msm/dp: add force bond mode support
drm/msm/dp: add tiled dp-mst mode support
drm/msm/dp: read sink caps when dp clock is enabled
drm: msm: sde: skip rm resources pair mask checks for 4LM topologies
disp: msm: sde: adjust encoders to support 4LM topologies
disp: msm: sde: add plane L/R property to support 4LM topologies
disp: msm: sde: expand max mixers to 4 to support 4LM topologies
drm/msm/sde: add 4LM topology variants in resource manager
drm/msm/sde: fix topology lookup table when ctl version is used
ARM: dts: msm: update UBWC highest bank bit for sdmshrike display
drm/msm/shd: fix null atomic state during mode_fixup
ARM: dts: msm: add dp-mst simulator for debug mode
drm/msm/dp: use dp_msm_sim for dp-mst simulation
drm/msm/dp: add dp-mst sideband simulator
drm/msm/dp: add dp-mst protocol simulator helper
drm/msm/dp: add dp aux bridge framework support
drm/msm/dp: add mixer count check in dp mode validation
drm/msm/dp: fix widebus-enable setting for dp
drm/msm/dp: update mode validation logic for widebus
drm: Check dp extended receiver capabilities
drm/msm: update topology based on clock requirement
drm: msm: dp: correct the resolution width check in get_mode_info
temp fix 8195 start camera fail
Revert "clk: Parallelization of clk_debug_init"
defconfig: sm8150: Enable led-qcom-clk driver
clk: qcom: gcc: Add support for 80KHz and 100KHz for gp clocks
clk: Parallelization of clk_debug_init
mhi: core: avoid memset of BHIE registers
ARM: dts: msm: Add device tree node for GP2 clock driven led
leds: qcom-clk: Add clock controller based PWM driver
msm: ais: free gpio and irq when kill ais_server
ARM: dts: msm: Add NVMe for sa8195p adp board
defconfig: msm: Enable NVMe for sdmshrike
ARM: dts: msm: add dload dump type for sa8195p
defconfig: msm: enable minidump for sa8195p
clk: qcom: camcc: Update post_div table according to freq plan
drm/msm/sde: fix null pointer in sde connector atomic check
ARM: dts: msm: Add pcie1~3 support for sa8195p
msm: msi: allow accesses to device MSI registers when using QGIC
Dm: init: Enable rootfs mount as dm-verity during boot without ramdisk
drm/msm/sde: fix null pointer in sde connector atomic check
scsi: ufs: Fix IOCTL error checking for input buffer
mhi: Don't do memset_io with RXVEC for qcn7605
serial: msm_geni_serial: Disable Flow only for HSUART usecase
disp: msm: dsi: add check before buffer copy
PM / devfreq: gpubw_mon: Add null check for governor private data
ARM64: dts: msm: delete the appsbl-qseecom-support property
Revert "init: support early userspace"
msm: ais: re-use camnoc info for 8195
msm: ais: sync to latest mobile camera
msm: ais: allow sensor power down from init state
msm: ais: fix pause/resume issue
defconfig: Enable debug clock controller for sdmshrike
ARM: dts: msm: Add the clock_debugcc node on sdmshrike
clk: qcom: Add debug clock controller for sdmshrike
ARM: dts: msm: Support GPU clock upto 670Mhz for SC8180
init: support early userspace
scsi: ufs: sysfs: health descriptor
drm/msm/sde: change backlight setup to support shared dsi display
drm/msm/shd: add dsi_display base in shd_display
Revert "msm: ais: fastforward to PC398"
ais: refine gerrit 2840559 to fix its side effects
mhi: Don't do memset_io with RXVEC for qcn7605
msm: ais: change maximum context numbers to 32
msm: ais: specify CPU for IFE interrupt
Increase stabilize for multiple camera
msm: ais: Remove the active_req_cnt < 2 limitation
drm/msm-lease: fix for markings
cnss2: set iova_start and iova_stop to physical RAM range
scsi: ufs: sysfs: health descriptor
Fix sa8195p boot panic.
dts: sa8195: fix display can't work in DP_MST mode
drm/msm-lease: create DRM MSM LEASE driver
drm: squash changes for drm lease from upstream
mhi: Don't do memset_io with RXVEC for qcn7605
Dm: init: Enable rootfs mount as dm-verity during boot without ramdisk.
Revert "msm: adsprpc: API to get DSP capability"
msm: camera : Lock Implementation for avoid race condition
msm: kgsl: Fix race condition while making page as dirty
net: sockev: avoid races between sockev and socket_close
Revert "msm: ais: Validate packet params against cpu buffer length"
Clean unused files: cam_cdm_hw_core.c/cam_cdm_virtual_core.c/cam_fd_hw_mgr.c/cam_icp_context.c.
fix blacklist issue
msm: ais: Validate packet params against cpu buffer length
ARM: dts: fix snd card probe error for sa8155 lv
msm: ais: resync ais to PC365 camera kernel
msm: camera: core : Validate the dev name during the node ioctl handler
drm: increase drm open count to 1024
Signed-off-by: UtsavBalar1231 <utsavbalar1231@gmail.com>
d9b983b161