* origin/q:
Revert "arm64/alternatives: use subsections for replacement sequences"
ARM: dts: msm: Modify gfx_iommus iommus-cells size for qcs405
ARM: dts: msm: Add dts file for kdump kernel on sa8155
ARM: dts: msm: multi-card for SA6155/SA8155/SA8195
defconfig: Add defconfig for kdump capture kernel on gen3_auto
usb: gadget: f_mdm_data: Do not queue OUT requests if MDM is disconnected
msm: pil: bootkpi: Add conditional boot marker for modem
defconfig: Initial common perf defconfig for sa8155 and sa8195
defconfig: sa8155: Enable CONFIG_KEXEC
ANDROID: Incremental fs: Remove dependency on PKCS7_MESSAGE_PARSER
ANDROID: Incremental fs: Cache successful hash calculations
ANDROID: Incremental fs: Fix four error-path bugs
Revert "ANDROID: Incremental fs: Avoid continually recalculating hashes"
ANDROID: Incremental fs: wake up log pollers less often
ANDROID: Incremental fs: Fix scheduling while atomic error
ANDROID: Incremental fs: Avoid continually recalculating hashes
ANDROID: Incremental fs: Fix issues with very large files
ANDROID: Incremental fs: Add setattr call
ANDROID: Incremental fs: Use simple compression in log buffer
ANDROID: Incremental fs: Fix create_file performance
ANDROID: Incremental fs: Fix compound page usercopy crash
ANDROID: Incremental fs: make remount log buffer change atomic
ANDROID: Incremental fs: Optimize get_filled_block
ANDROID: Incremental fs: Fix mislabeled __user ptrs
ANDROID: Incremental fs: Use 64-bit int for file_size when writing hash blocks
Revert "ANDROID: Incremental fs: Fix initialization, use of bitfields"
ANDROID: Incremental fs: Fix remount
ANDROID: Incremental fs: Protect get_fill_block, and add a field
ANDROID: Incremental fs: Fix crash polling 0 size read_log
ANDROID: Incremental fs: get_filled_blocks: better index_out
ANDROID: Incremental fs: Fix four resource bugs
ANDROID: Incremental fs: Add INCFS_IOC_GET_FILLED_BLOCKS
ANDROID: Incremental fs: Fix two typos
ANDROID: Incremental fs: Add INCFS_IOC_PERMIT_FILL
ANDROID: Incremental fs: Remove signature checks from kernel
ANDROID: Incremental fs: Pad hash blocks
ANDROID: Incremental fs: Make fill block an ioctl
ANDROID: Incremental fs: Remove all access_ok checks
ANDROID: Incremental fs: Support xattrs
ANDROID: Incremental fs: Fix initialization, use of bitfields
ANDROID: Incremental fs: Fix crash on failed lookup
ANDROID: Incremental fs: Make files writeable
ANDROID: Incremental fs: Remove C++-style comments
power: smb1398-charger: disable sync between master and slave
power: smb1398-charger: Update the OVP threshold to 14V
power: smb1398: Update default cp-min-icl to 1A for HVDCP3
power: battery: Add support to enable PPS to work in CV mode
ARM: dts: qcom: Add HS-I2S device tree support on SA8195-GVM
spi: spi-geni-qcom: Avoid return before mutex unlock
drivers: soc: sdx_ext_ipc: Fix dev_err
drivers: soc: sdx_ext_ipc: Fix probe failure
serial: msm_geni_serial: Fix DMA TX FSM reset sequence
Bluetooth: Add the support for wcn3980 in SDM429w
ARM: dts: msm: Add bluetooth node for 2wcn support for SDM429w
ARM: dts: msm: Disable can-controller node for SA8195 ADP AIR board
defconfig: Add WCNSS related config parameter
rpmsg: qcom_glink_bgcom: Correct the remote intent ack sequence
msm: ipa3: Update the channel mode before start channel
ARM: dts: add audio device tree for sdm429
soc: qcom: hab: add the buffer size sanity check for exporting a buffer
ARM: dts: msm: revert qcs410 include from dt file
regulator: qcom_pm8008: Fix regulator_get_voltage API
Revert "bootkpi: Add KPI Marker for System Resume"
ARM: dts: msm: Increase CMA region to 40 MB on sm6150
ARM: dts: msm: Reduce AQC ring size with PCIe switch on sdxprairie
ARM: dts: msm: Remove unused AQC devicetree node in sdxprairie
msm: sps: Correct descriptor fifo address to dump contents
defconfig: msm: Enable required limits driver for sdm429-bg
ARM: dts: sa2145p: add support for NAND SOM
dts: sdx: add support for tdm for sa515m card
ARM: dts: msm: update modem Tj thermal zone trips for SA515
net: stmmac: Fixed autoneg disable issue
ARM: dts: msm: Enable ro.boot.avb_version for sdm429
cfg80211: Add support for HE
msm: ipa: send the endp_desc QMI for low_lat only on non-auto mode
msm: ais: ife SOF and buffer done tracking
arm :dts : Modified the rgmii size
ARM: dts: msm: enable AVB 2.0 in linux guest
defconfig: support for hid-nintendo driver
ARM: dts: msm: sdhci: disable hotplug in broken change detect
arm-smmu: add bitmap for secure context banks
iommu/arm-smmu: override writel_relaxed in smmu global address space
char: virtio_fastrpc: use DMA_ATTR_SKIP_CPU_SYNC for uncached buffer
mhi: core: Prevent extra votes for multiple timesync requests
msm:npu: prevent fmax_pwrlvl to be used uninitialized
ARM: dts: msm: Add new property npu-dsp-sid-mapped for npu
msm: npu: Allow user code to query if NPUDSP SID is mapped
net: stmmac: Add check for HWTSTAMP_FILTER_ALL filter
Revert "msm: pcie: add parallelization support for pcie msm probe"
ARM: dts: msm: Fix wrong include file in sa8195 adp-air overlay
msm: vidc: fix dec out buf count update logic for batching mode
ARM: dts: sa2145p: enable side band wake up support
serial:msm_geni_serial: CANCEL bit changes for 4.14 based target
ARM: dts: msm: Add common device tree for SA8195 ADP
defconfig: arm64: msm: Enable CONFIG_IOMMU_IO_PGTABLE_FAST in QCS405
ARM: dts: msm: Enable PCIe0 for S8155 Single LV GVM
FROMLIST: HID: nintendo: add nintendo switch controller driver
f2fs: remove blk_plugging in block_operations
usb: gadget: f_gsi: Increase num of buffers to 50 for ECM
msm: v4l2loopback: Implement V4L2 cropping functionality
defconfig: sa2150p: enable graphics driver
ARM: dts: sa2150p: Enable device nodes for graphics support
usb: gadget: f_ipc: Add support of sideband notifier call chain
ARM: dts: msm: disable qti-can on SA8155 ADP AIR board
spi: spi-geni-qcom: Restrict SPI responder to transfer mode 1
msm: mhi_dev: Wait for host to set BHI_INTVEC value
defconfig: sdm429w: Add new defconfig to enable new PA
msm: mhi_dev: Skip mhi channel state info change
defconfig: sa2150p: enable helper APIs for sideband notifications
wcnss: Register wlan driver ops for SMD notification
spi: spi_qsd: Add Shared EE property check for spi
documentation: bindings: spi_qsd: Add shared ee dtsi flag
msm-geni-serial: Correct the interrupt polling logic in uart
rpmsg: glink: Changing interrupt trigger option
arm64: config: Enable Glink for GVM
ARM: dts: msm: Add skip-disable-before-sw-enable flag to gx_gdsc
clk: qcom: gdsc-regulator: Update support to skip GDSC disable
ARM: dts: msm: change display-label to display-type for DSI0
ARM: dts: qcom: add video device tree support for sdm429w
ARM64: dts: msm: Add wakeup support for sdx-ext-ipc devices
drivers: soc: sdx_ext_ipc: Add wakeup support from system suspend
ARM: dts: msm: change HAB VMID to 3 for single LV GVM
msm: ipahal: Add uCP exception case for status pkt
genetlink: remove genl_bind
net: stmmac: Set DOMAIN_ATTR_GEOMETRY for smmu fastmap
usb: gadget: f_midi: Avoid invalid pointer access
ipa3: Support wdi3 over gsi on msmnile APQ target
msm: kgsl: Put a keep alive vote before updating CP_RB_WPTR
rpmsg: qcom_glink_bgcom: Correct the copyright licence
msm: ep_pcie: Add KPI marker and log for PCIe link init
msm: mhi_dev: Add KPI marker and log for mhi init
arm64/kdump: Build fix for CONFIG_KEXEC
serial: msm_geni_serial: Initialize the variables before access
mailbox: Add new mailbox for gvm
hwspinlock: Add support to parse spin lock id
clk: qcom: mdss: update dsi 12nm clock driver
mm/swapfile.c: move inode_lock out of claim_swapfile
ARM: dts: qcom: update display dts nodes for sdm429w WTP
soc: qcom: dcc_v2: Add NULL check before using dcc driver data
mm/memblock.c: fix bug in early_dyn_memhotplug
ARM: dts: sa2150p: enable BLSP0 UART and free up GPIO 83
ARM: dts: sa2150p: add support for NAND based SOM
ARM: dts: sa2145p: add support for NAND based SOM
defconfig: sa515m: enable helper APIs for sideband notifications
soc: qcom: sideband: add helper APIs for sideband notifications
clk: qcom: smd_rpm: Change rpm clk_id for SDM429
defconfig: sdm429: Add MPROC GLINK defconfig for SDM429W
defconfig: Initial common defconfig for sa8155 and sa8195
ARM: dts: sa2145p: add msm-id for sa2145p chip
ARM: dts: sa2150p: remove incorrect msm-id inclusion
ARM: dts: msm: Update mpss_adsp carved memory for sa515m platform
ARM: msm: dts: enable touch node for wearable
ARM: dts: qcom: vm: Add device nodes for second AFE rx and proxy tx devices
ARM: dts: msm: Disable BAM mode for spi dtsi node
ARM: dts: msm: Add glink bgcom dtsi node for sdm429
rpmsg: Add glink-bgcom driver for rpmsg framework
tmc-etr: Add ETR status check in usb_notifier
defconfig: sdm429: add display configs
spi: spi-geni-qcom: Don't initialize GSI channels for FIFO/SE_DMA mode
ARM: dts: Add NFC device node for SDM429W
clk: qcom: smd_rpm: Add bb_clk_pin for SDM429
ARM: msm: dts: Enable restarting usb host mode in HS for SDM660
USB: pd: Restart host mode in high speed if no usb3 & dp concurrency
qcom/watchdog_v2: Disable watchdog before booting crash kernel
ARM: dts: Enable HMP for SA8195, SA8155 and SA6155 VM
msm: sps: Assign proper BAM destination values
ARM: dts: msm: Add SPM control for sdm429w
clk: qcom: cpu-sdm: Add spm control support
defconfig: sdm: Add support for CPU clocks
ARM: dts: msm: Add CPU clock support for sdm429w
clk: qcom: cpu-sdm: Add cpu clock driver for SDM
ARM: dts: msm: add gpr and gecko drivers to DT
ARM: dts: msm: add display related dt nodes on QCS410 device
msm: ais: acquire init_frame_drop from userspace
defconfig: Enable qcom_sps_dma driver for sdm429w
i2c-msm-v2: Make init call as module_init for i2c driver
usb: host: xhci-plat: Fix IMOD configuration from sysfs
ARM: dts: msm: Add GPU support for sdm429w
ARM: dts: msm: Add to distinguish NO or NC connection in USB Type-C
msm: ipa: Fix updating the doobell for WDI3
bindings: qpnp-smb5: add property to show fake charging status
ARM: dts: msm: Add wcnss node for sdm429
defconfig: sa2150p: Enable SDX_EXT_IPC
msm: kgsl: Add A504 GPU support for SDM429
defconfig: sa2150p-nand: Enable SDX_EXT_IPC
ARM: dts: msm: Remove the extra double quotes in the model name
clk: qcom: gdsc-regulator: Add support to skip GDSC disable
clk: qcom: Add enable_safe_config for gfx3d_clk_src
ARM: dts: msm: Add bg spi and bg daemon nodes
coresight-tmc-etr: Add QDSS IPA bam connection support
ARM: dts: msm: Add blackghost pil node
ARM: dts: msm: Define adsp loader node
defconfig: sdm429: Add pil configs to sdm429
ARM: dts: msm: add device tree for EAP connection through ethernet
power: qpnp-smb5: add property to show fake charging status
power: smb5-lib: Show unknown battery status for debug battery
arm: dts: msm: Add dt entry to enable geometry mapping in stmmac
ARM: dts: msm: Add multiport USB controller and PHYs on sdmshrike
usb: dwc3: Write necessary registers for dual port enablement
usb: dwc3-msm: Add support for 2nd set of wakeup IRQs
usb: dwc3: Add support for 4 PHYs for dual port controller
qseecom: register qseecom client with msm bus driver
msm: ais: remove cci reset for specified master during cci initialization
ARM: dts: msm: Align with the gpio name change in driver
drivers: soc: sdx_ext_ipc: Give generic name for gpios
drivers: soc: sdx_ext_ipc: Make gpio DT entries optional
i2c: i2c-qcom-geni: Enhance IPC logging debug infra in I2C
ASoC: tfa98xx: Update profile info properly
ASoC: tfa98xx: Fix type casting error
ASoC: tfa98xx: Add tfa98xx smart PA driver
msm: sps: Use iomem attribute for base address
msm: mhi_dev: Do not flush events to host if channel is stopped
ARM: dts: msm: add tzlog device node for sdm429
fs: namespace: Fix use-after-free in unmount
msm: ais: fix cci read return value issue
ARM : dts : support realtek r8125 ethernet driver
msm: ethernet : smmu: enable qcom smmu
dma-mapping-fast: Fix erroneous MAIR idx calculation
sdm429w: modify copy right year as per guidelines
pinctrl: qcom: Clear status bit on irq_unmask
Revert "Revert "ANDROID: security,perf: Allow further restriction of perf_event_open""
defconfig: enable cpufreq stats config
drivers: soc: qcom: Add bg pil driver to 4.14
clk: qcom: rcg2: Fix possible null pointer dereference
usb: misc: Add support for diag bridging over mdm_data_bridge
ARM: dts: msm: Add pil nodes to sdm429
msm: kernel: add bgcom interface header file
ARM: dts: msm: Add trace source coresight nodes for sdmshrike
ARM: dts: msm: Enable CTIs and TPDMs for sdmshrike
msm: kernel: add bgcom interface header file
ARM: dts: msm: Fix crypto tests
ARM: dts: msm: Add support for various subtype of IDP board for QCM/S6125
ARM: msm: Hardware name correction for SDM429W
ARM: dts: msm: enable smmu for sdm429
ARM: dts: msm: Disable the secure mem region for SDM429
drivers: thermal: Force notify thermal to re-evaluate TSENS sensors
msm: set config for ADSPRPC and add dtsi node
spi: spi-geni-qcom: Check for zero length transfer
spi: spi-geni-qcom: Reset the dma engine on failure
cpufreq: stats: Change return type of cpufreq_stats_update() as void
cpufreq: stats: Handle the case when trans_table goes beyond PAGE_SIZE
drivers: thermal: Re-initialize TSENS controller interrupt configuration
Early Services: init: fs: synchronize Early Services with init
soc: qcom: dcc_v2: Add PM callbacks to support hibernation
atlantic forwarding driver v1.1.7
ARM: dts: msm: Add support for DT overlay QCS410
platform: msm: qcom-geni-se: Enable SSC QUP SE clks before SCM call
dfc: fix null pointer access
dfc: add stall recovery timer
regulator: qpnp-lcdb: Disable step voltage ramp for PM8150L V3
drm:msm:sde fix compile error when RSC is not enabled
msm: mhi_dev: Increase size of ipa_clnt_hndl array
sched: core_ctl: Fix possible uninitialized variable
msm: mhi_dev: Disable IPA DMA during MHI cleanup
ARM: dts: msm: Remove camera pil memory
defconfig: sdm429w: Enable BGCOM drivers
wcnss: validate build version response correctly
msm: ais: fix 6155 crop issue on mini IFE driver
msm: ipa: Support hardware accelerated DIAG over qdss
msm: kgsl: Do not double free pages in kgsl_memdesc
defconfig: sa2150p: remove IEEE 802.11 support
defconfig: sa2150p: remove bluetooth driver not required
wcnss: Export SMD channel close API for wlan driver removal
wcnss: Export wcnss smd tx method
defconfig: sa2150p-nand: Add 3D Graphics driver
msm: camera: Update CSIPHY/CSID v3.5 registers
mhi: netdev: free memory allocated in read/write
ARM: dts: msm: Add audio support
ARM: dts: msm: Add qseecom node for sdm429
early init: adjust early devices for 8195
qseecom: use legacy command for bgapp
sched: Improve the scheduler
dt-bindings: drm: msm: update detach handoff option for shp
dt-bindings: drm: msm: shd: add dynamic mode support
dt-bindings: drm: msm-lease: add empty resource support
arm: dts: msm: Add dt entry to enable geometry mapping in EMAC
ARM: dts: msm: Add 1.8v override for SA515M telematics CDP
staging: android: ion: Add support for Carveout allocations in ion_alloc
soc: qcom: Add bgcom driver for sdm429w
ARM: dts: msm: Remove the pil-force-shutdown flag
msm: ipa3: Fix to map the npn phy address only once
msm: mhi_dev: update NHWER after M0 from host
profiler: Add a communication interface between userspace and tz services
defconfig: msm: Add PCIe driver for sdxprarie
ARM: dts: msm: Add PCIe switch driver for sdxprairie
pci: switch: Add PCIe switch driver
msm: camera: isp: Flush Pending list after stop HW to avoid race
clk: qcom: Add debug clk support for SDM660
msm: ipa3: Send actual DL flt rule to Q6
cnss2: Add synchronized force wake support
ARM: dts: msm: Add debugcc support for SDM660
defconfig: sdm429: Add CONFIG_MSM_TZ_SMMU defconfig for sdm429
power: smb2: Enable read/writing of Type-C Rp value
iommu/arm-smmu: Add MSM_TZ_SMMU support on SDM429W
ARM: msm: dts: Set usb dvdd voltage range to [0.8v 0.8v] for sdm429
clk: qcom: sdm429w: Update the gcc/debugcc for sdm429w
rpmsg: qcom_smd: Add SET signal support
ARM: dts: qcom: Add device nodes for second AFE rx and proxy tx devices
ARM: dts: qcom: Correct adsp_smsm node interrupt number
ARM: dts: msm: correct the filenames in Makefile
usb: gadget: f_ipc: Fix race between ipc_free_inst and ipc_close
msm: ais: define early init for camera
ARM: DTS: msm: Update DP PLL string for SDM660
msm: ais: fix cci read return value issue
ARM: dts: msm: remove default SA6155 DP pinctrl
usb: gadget: f_qdss: Allocate one string ID for all instances
dma-buf: fix race while reading the dma_buf in dmabuffs_dname
usb: gadget: Reset string ids upon unbind
init: define early init functions for display subsystem
msm: adsprpc: Fix array index underflow problem
init: support early init framework
USB: f_mtp: Revert Avoid queuing of receive_file_work for 0 length
msm: ais: fix csid fatal error issue
ARM: dts: msm: Add QDSS IPA bam connection config for sdxprairie
mhi: core: Use high priority workqueue for all MHI work
net: stmmac: dwmac4_prog_mtl_tx_algorithms() missing write operation
net: stmmac: Disable flow ctrl for RX AVB queues and enable TX AVB queues
net: stmmac: copyright year fix
defconfig: msm: Disable CONFIG_BUILD_ARM64_APPENDED_DTB_IMAGE flag
ARM: dts: msm: Add pseudo port entries
ARM: dts: msm: remove qdss offset for trinket
ARM: dts: msm: add support of DP PHY bond mode for SA8195p
ARM: dts: msm: added 2nd DP and eDP for SA8195p
ARM: dts: msm: revert 2nd DP and eDP related DT modification
ARM: dts: msm: Add WLAN pin control support on sdm429w
drm/msm/sde: Add data structure for ROI MISR
Revert "ARM: dts: msm: remove 2nd DP and eDP from sa8195p"
msm: ipa: Move the QMI for mhi pipe info to modem bootup
ARM: dts: msm: Remove GPU min, low and svs levels for 8195
ARM: dts: msm: include correct dtsi for sa8195p-v2-adp-air-overlay.dts
diag: Add debug logs tracing diag mhi read and write paths
ARM: dts: msm: Add MPROC glink related node for gvm
soc: qcom: smem: Support to parse smem host id
msm: npu: refactor wait_for_status_ready to reduce the latency
arm64: Allow boot on cpus other than logical cpu 0
arm64: dts: qcs405: Add src clk strings
ARM: dts: msm: Add pcie1 support for sa8155 virtual machine
clk: qcom: Add pcie1 virtio clocks for sa8155
net: stmmac: copy from user fail handle
init: use unbound instead of highpriority wq in early init
msm: ipa3: increase pkt ctx for cv2x rsrc grp
rpmsg: smd: Use spinlock in tx path
init: support early init on SA8195
diag: Add protection while accessing diag client map
Revert "ARM: dts: msm: Enabling dynamic splash on DSI and DP displays (sa8195)"
drm/msm/shd: Update topology name in shd atomic check
Set req_id in trigger notify and slot increment
ARM: dts: msm: Enabling dynamic splash on DSI and DP displays (sa8195)
drm/msm/sde: Move roi number check to atomic_check stage
drm/msm/shd: Fix can't register irq of roi misr
net: stmmac: use correct header type
dtsi: SA8155: Early ethernet changes
defconfig: SA8155: Enable ebtables vlan filters
ARM: dts: msm: Add roi misr register address for sm6150
ARM: dts: msm: Add roi misr register address for sdmshrike
ARM: dts: msm: Add roi misr register address for sm8150
drm/msm/sde: add roi misr support
drm/msm/sde: skip rsc client creation for external encoders
init: define early init functions for camera subsystem
drm/msm/dsi-staging: add support for output CSI-2 compatible stream
drm/msm/dsi-staging: add missing RGB color re-order
drm/msm/shd: fix null pointer during pm_suspend
msm/shd: Resolve conflictions in HEAD
mm/free_area_init_core: skip memmap_init for holes
drm/msm: add boot marker
init: move more subsystems into early init framework
init: define early init functions for display subsystem
init: define early devices needed by all subsystems
init: support early userspace
init: define early init functions for rootfs mounting
init: define early init functions needed by all subsystems
init: add new early param and define early initcall macros
arm: dts: msm: switch to 8 channel ubwc for sdmshrike GPU
ARM: dts: msm: update macro tile mode for sdmshrike display
msm: kgsl: Add macrotiling channels property
initialize the return value to 0 for irq request
msm: ais: handle timestamp for each RDI of IFE
drm/msm/sde: fix LM split index for single LM case
drm/msm/shd: add quad lm support to shared display
drm/msm-lease: add 32bit ioctl support for msm lease
drm/msm-lease: fix potential racing condition for msm lease
drm/msm/shd: populate base topology for shared virtual display
drm/msm/shd: wait additional vsync when all planes are detached
defconfig: sdmshrike: Enable config for dyn splash
drm/msm/sde: add plane layout check and global coordinate support
drm/msm/sde: add num_mixers in sde_crtc_state
drm/msm/sde: fix plane sorting with layout set
drm/msm/dp: accumulated fixes from dev branch
drm/msm/sde: add topology_name in crtc state
drm/msm/sde: set pipes per stage to 4 to support quad lm
ARM: dts: msm: add support of DP PHY bond mode for SA8195p
drm/msm/dp: add DP PHY bond mode support
clk/qcom/mdss: added PHY bond mode for 7nm DP/USB PHY
ARM: dts: msm: added 2nd DP and eDP for SA8195p
clk/qcom/mdss: added secondary DP/USB PHY PLL support
drm/msm/dp: added 7nm eDP/DP PHY 5.0.0 support
clk/qcom/mdss: added 7nm eDP/DP PHY support
drm/msm/dp: add multiple DP instances support for DP/USB combo PHY
drm/msm/dp: add force bond mode for dp-sst
drm/msm/dp: add bond tiled mode support
drm/msm/dp: add support to multiple dp instances
drm/msm/dp: add force bond mode support
drm/msm/dp: add tiled dp-mst mode support
drm/msm/dp: read sink caps when dp clock is enabled
drm: msm: sde: skip rm resources pair mask checks for 4LM topologies
disp: msm: sde: adjust encoders to support 4LM topologies
disp: msm: sde: add plane L/R property to support 4LM topologies
disp: msm: sde: expand max mixers to 4 to support 4LM topologies
drm/msm/sde: add 4LM topology variants in resource manager
drm/msm/sde: fix topology lookup table when ctl version is used
ARM: dts: msm: update UBWC highest bank bit for sdmshrike display
drm/msm/shd: fix null atomic state during mode_fixup
ARM: dts: msm: add dp-mst simulator for debug mode
drm/msm/dp: use dp_msm_sim for dp-mst simulation
drm/msm/dp: add dp-mst sideband simulator
drm/msm/dp: add dp-mst protocol simulator helper
drm/msm/dp: add dp aux bridge framework support
drm/msm/dp: add mixer count check in dp mode validation
drm/msm/dp: fix widebus-enable setting for dp
drm/msm/dp: update mode validation logic for widebus
drm: Check dp extended receiver capabilities
drm/msm: update topology based on clock requirement
drm: msm: dp: correct the resolution width check in get_mode_info
temp fix 8195 start camera fail
Revert "clk: Parallelization of clk_debug_init"
defconfig: sm8150: Enable led-qcom-clk driver
clk: qcom: gcc: Add support for 80KHz and 100KHz for gp clocks
clk: Parallelization of clk_debug_init
mhi: core: avoid memset of BHIE registers
ARM: dts: msm: Add device tree node for GP2 clock driven led
leds: qcom-clk: Add clock controller based PWM driver
msm: ais: free gpio and irq when kill ais_server
ARM: dts: msm: Add NVMe for sa8195p adp board
defconfig: msm: Enable NVMe for sdmshrike
ARM: dts: msm: add dload dump type for sa8195p
defconfig: msm: enable minidump for sa8195p
clk: qcom: camcc: Update post_div table according to freq plan
drm/msm/sde: fix null pointer in sde connector atomic check
ARM: dts: msm: Add pcie1~3 support for sa8195p
msm: msi: allow accesses to device MSI registers when using QGIC
Dm: init: Enable rootfs mount as dm-verity during boot without ramdisk
drm/msm/sde: fix null pointer in sde connector atomic check
scsi: ufs: Fix IOCTL error checking for input buffer
mhi: Don't do memset_io with RXVEC for qcn7605
serial: msm_geni_serial: Disable Flow only for HSUART usecase
disp: msm: dsi: add check before buffer copy
PM / devfreq: gpubw_mon: Add null check for governor private data
ARM64: dts: msm: delete the appsbl-qseecom-support property
Revert "init: support early userspace"
msm: ais: re-use camnoc info for 8195
msm: ais: sync to latest mobile camera
msm: ais: allow sensor power down from init state
msm: ais: fix pause/resume issue
defconfig: Enable debug clock controller for sdmshrike
ARM: dts: msm: Add the clock_debugcc node on sdmshrike
clk: qcom: Add debug clock controller for sdmshrike
ARM: dts: msm: Support GPU clock upto 670Mhz for SC8180
init: support early userspace
scsi: ufs: sysfs: health descriptor
drm/msm/sde: change backlight setup to support shared dsi display
drm/msm/shd: add dsi_display base in shd_display
Revert "msm: ais: fastforward to PC398"
ais: refine gerrit 2840559 to fix its side effects
mhi: Don't do memset_io with RXVEC for qcn7605
msm: ais: change maximum context numbers to 32
msm: ais: specify CPU for IFE interrupt
Increase stabilize for multiple camera
msm: ais: Remove the active_req_cnt < 2 limitation
drm/msm-lease: fix for markings
cnss2: set iova_start and iova_stop to physical RAM range
scsi: ufs: sysfs: health descriptor
Fix sa8195p boot panic.
dts: sa8195: fix display can't work in DP_MST mode
drm/msm-lease: create DRM MSM LEASE driver
drm: squash changes for drm lease from upstream
mhi: Don't do memset_io with RXVEC for qcn7605
Dm: init: Enable rootfs mount as dm-verity during boot without ramdisk.
Revert "msm: adsprpc: API to get DSP capability"
msm: camera : Lock Implementation for avoid race condition
msm: kgsl: Fix race condition while making page as dirty
net: sockev: avoid races between sockev and socket_close
Revert "msm: ais: Validate packet params against cpu buffer length"
Clean unused files: cam_cdm_hw_core.c/cam_cdm_virtual_core.c/cam_fd_hw_mgr.c/cam_icp_context.c.
fix blacklist issue
msm: ais: Validate packet params against cpu buffer length
ARM: dts: fix snd card probe error for sa8155 lv
msm: ais: resync ais to PC365 camera kernel
msm: camera: core : Validate the dev name during the node ioctl handler
drm: increase drm open count to 1024
Signed-off-by: UtsavBalar1231 <utsavbalar1231@gmail.com>
d051fc8d18