Changes in 5.4.251
gfs2: Don't deref jdesc in evict
x86/smp: Use dedicated cache-line for mwait_play_dead()
video: imsttfb: check for ioremap() failures
fbdev: imsttfb: Fix use after free bug in imsttfb_probe
HID: wacom: Use ktime_t rather than int when dealing with timestamps
drm/i915: Initialise outparam for error return from wait_for_register
scripts/tags.sh: Resolve gtags empty index generation
drm/amdgpu: Validate VM ioctl flags.
bgmac: fix *initial* chip reset to support BCM5358
x86/resctrl: Use is_closid_match() in more places
x86/resctrl: Only show tasks' pid in current pid namespace
md/raid10: check slab-out-of-bounds in md_bitmap_get_counter
md/raid10: fix overflow of md/safe_mode_delay
md/raid10: fix wrong setting of max_corr_read_errors
md/raid10: fix null-ptr-deref of mreplace in raid10_sync_request
md/raid10: fix io loss while replacement replace rdev
irqchip/jcore-aic: Kill use of irq_create_strict_mappings()
irqchip/jcore-aic: Fix missing allocation of IRQ descriptors
tracing/timer: Add missing hrtimer modes to decode_hrtimer_mode().
clocksource/drivers/cadence-ttc: Use ttc driver as platform driver
clocksource/drivers/cadence-ttc: Fix memory leak in ttc_timer_probe
PM: domains: fix integer overflow issues in genpd_parse_state()
powercap: RAPL: Fix CONFIG_IOSF_MBI dependency
ARM: 9303/1: kprobes: avoid missing-declaration warnings
evm: Complete description of evm_inode_setattr()
pstore/ram: Add check for kstrdup
ima: Fix build warnings
wifi: ath9k: fix AR9003 mac hardware hang check register offset calculation
wifi: ath9k: avoid referencing uninit memory in ath9k_wmi_ctrl_rx
samples/bpf: Fix buffer overflow in tcp_basertt
spi: spi-geni-qcom: Correct CS_TOGGLE bit in SPI_TRANS_CFG
wifi: mwifiex: Fix the size of a memory allocation in mwifiex_ret_802_11_scan()
nfc: constify several pointers to u8, char and sk_buff
nfc: llcp: fix possible use of uninitialized variable in nfc_llcp_send_connect()
regulator: core: Fix more error checking for debugfs_create_dir()
regulator: core: Streamline debugfs operations
wifi: orinoco: Fix an error handling path in spectrum_cs_probe()
wifi: orinoco: Fix an error handling path in orinoco_cs_probe()
wifi: atmel: Fix an error handling path in atmel_probe()
wl3501_cs: Fix a bunch of formatting issues related to function docs
wl3501_cs: Remove unnecessary NULL check
wl3501_cs: Fix misspelling and provide missing documentation
net: create netdev->dev_addr assignment helpers
wl3501_cs: use eth_hw_addr_set()
wifi: wl3501_cs: Fix an error handling path in wl3501_probe()
wifi: ray_cs: Utilize strnlen() in parse_addr()
wifi: ray_cs: Drop useless status variable in parse_addr()
wifi: ray_cs: Fix an error handling path in ray_probe()
wifi: ath9k: don't allow to overwrite ENDPOINT0 attributes
wifi: rsi: Do not set MMC_PM_KEEP_POWER in shutdown
watchdog/perf: define dummy watchdog_update_hrtimer_threshold() on correct config
watchdog/perf: more properly prevent false positives with turbo modes
kexec: fix a memory leak in crash_shrink_memory()
memstick r592: make memstick_debug_get_tpc_name() static
wifi: ath9k: Fix possible stall on ath9k_txq_list_has_key()
rtnetlink: extend RTEXT_FILTER_SKIP_STATS to IFLA_VF_INFO
wifi: iwlwifi: pull from TXQs with softirqs disabled
wifi: cfg80211: rewrite merging of inherited elements
wifi: ath9k: convert msecs to jiffies where needed
netlink: fix potential deadlock in netlink_set_err()
netlink: do not hard code device address lenth in fdb dumps
selftests: rtnetlink: remove netdevsim device after ipsec offload test
gtp: Fix use-after-free in __gtp_encap_destroy().
nfc: llcp: simplify llcp_sock_connect() error paths
net: nfc: Fix use-after-free caused by nfc_llcp_find_local
lib/ts_bm: reset initial match offset for every block of text
netfilter: conntrack: dccp: copy entire header to stack buffer, not just basic one
netfilter: nf_conntrack_sip: fix the ct_sip_parse_numerical_param() return value.
ipvlan: Fix return value of ipvlan_queue_xmit()
netlink: Add __sock_i_ino() for __netlink_diag_dump().
radeon: avoid double free in ci_dpm_init()
Input: drv260x - sleep between polling GO bit
ARM: dts: BCM5301X: Drop "clock-names" from the SPI node
Input: adxl34x - do not hardcode interrupt trigger type
drm: sun4i_tcon: use devm_clk_get_enabled in `sun4i_tcon_init_clocks`
RDMA/bnxt_re: Fix to remove an unnecessary log
ARM: dts: gta04: Move model property out of pinctrl node
arm64: dts: qcom: msm8916: correct camss unit address
drm/panel: simple: fix active size for Ampire AM-480272H3TMQW-T01H
ARM: ep93xx: fix missing-prototype warnings
memory: brcmstb_dpfe: fix testing array offset after use
ASoC: es8316: Increment max value for ALC Capture Target Volume control
ASoC: es8316: Do not set rate constraints for unsupported MCLKs
soc/fsl/qe: fix usb.c build errors
IB/hfi1: Fix sdma.h tx->num_descs off-by-one errors
arm64: dts: renesas: ulcb-kf: Remove flow control for SCIF1
fbdev: omapfb: lcd_mipid: Fix an error handling path in mipid_spi_probe()
drm/amdkfd: Fix potential deallocation of previously deallocated memory.
drm/radeon: fix possible division-by-zero errors
clk: tegra: tegra124-emc: Fix potential memory leak
ALSA: ac97: Fix possible NULL dereference in snd_ac97_mixer
clk: cdce925: check return value of kasprintf()
clk: keystone: sci-clk: check return value of kasprintf()
ASoC: imx-audmix: check return value of devm_kasprintf()
scsi: qedf: Fix NULL dereference in error handling
PCI/ASPM: Disable ASPM on MFD function removal to avoid use-after-free
scsi: 3w-xxxx: Add error handling for initialization failure in tw_probe()
PCI: pciehp: Cancel bringup sequence if card is not present
PCI: ftpci100: Release the clock resources
PCI: Add pci_clear_master() stub for non-CONFIG_PCI
pinctrl: cherryview: Return correct value if pin in push-pull mode
perf dwarf-aux: Fix off-by-one in die_get_varname()
pinctrl: at91-pio4: check return value of devm_kasprintf()
powerpc/mm/dax: Fix the condition when checking if altmap vmemap can cross-boundary
hwrng: virtio - add an internal buffer
hwrng: virtio - don't wait on cleanup
hwrng: virtio - don't waste entropy
hwrng: virtio - always add a pending request
hwrng: virtio - Fix race on data_avail and actual data
crypto: nx - fix build warnings when DEBUG_FS is not enabled
modpost: fix section mismatch message for R_ARM_ABS32
modpost: fix section mismatch message for R_ARM_{PC24,CALL,JUMP24}
crypto: marvell/cesa - Fix type mismatch warning
modpost: fix off by one in is_executable_section()
ARC: define ASM_NL and __ALIGN(_STR) outside #ifdef __ASSEMBLY__ guard
NFSv4.1: freeze the session table upon receiving NFS4ERR_BADSESSION
hwrng: st - Fix W=1 unused variable warning
hwrng: st - keep clock enabled while hwrng is registered
USB: serial: option: add LARA-R6 01B PIDs
usb: dwc3: gadget: Propagate core init errors to UDC during pullup
block: fix signed int overflow in Amiga partition support
block: change all __u32 annotations to __be32 in affs_hardblocks.h
w1: fix loop in w1_fini()
sh: j2: Use ioremap() to translate device tree address into kernel memory
media: usb: Check az6007_read() return value
media: videodev2.h: Fix struct v4l2_input tuner index comment
media: usb: siano: Fix warning due to null work_func_t function pointer
usb: dwc3: qcom: Fix potential memory leak
extcon: Fix kernel doc of property fields to avoid warnings
extcon: Fix kernel doc of property capability fields to avoid warnings
usb: phy: phy-tahvo: fix memory leak in tahvo_usb_probe()
usb: hide unused usbfs_notify_suspend/resume functions
mfd: rt5033: Drop rt5033-battery sub-device
KVM: s390: fix KVM_S390_GET_CMMA_BITS for GFNs in memslot holes
usb: dwc3: qcom: Release the correct resources in dwc3_qcom_remove()
mfd: intel-lpss: Add missing check for platform_get_resource
serial: 8250_omap: Use force_suspend and resume for system suspend
mfd: stmfx: Fix error path in stmfx_chip_init
KVM: s390: vsie: fix the length of APCB bitmap
mfd: stmpe: Only disable the regulators if they are enabled
pwm: imx-tpm: force 'real_period' to be zero in suspend
pwm: sysfs: Do not apply state to already disabled PWMs
rtc: st-lpc: Release some resources in st_rtc_probe() in case of error
sctp: fix potential deadlock on &net->sctp.addr_wq_lock
Add MODULE_FIRMWARE() for FIRMWARE_TG357766.
spi: bcm-qspi: return error if neither hif_mspi nor mspi is available
mailbox: ti-msgmgr: Fill non-message tx data fields with 0x0
f2fs: fix error path handling in truncate_dnode()
powerpc: allow PPC_EARLY_DEBUG_CPM only when SERIAL_CPM=y
net: bridge: keep ports without IFF_UNICAST_FLT in BR_PROMISC mode
tcp: annotate data races in __tcp_oow_rate_limited()
xsk: Improve documentation for AF_XDP
xsk: Honor SO_BINDTODEVICE on bind
net/sched: act_pedit: Add size check for TCA_PEDIT_PARMS_EX
net: dsa: tag_sja1105: fix MAC DA patching from meta frames
sh: dma: Fix DMA channel offset calculation
i2c: xiic: Defer xiic_wakeup() and __xiic_start_xfer() in xiic_process()
i2c: xiic: Don't try to handle more interrupt events after error
ALSA: jack: Fix mutex call in snd_jack_report()
NFSD: add encoding of op_recall flag for write delegation
mmc: core: disable TRIM on Kingston EMMC04G-M627
mmc: core: disable TRIM on Micron MTFC4GACAJCN-1M
mmc: sdhci: fix DMA configure compatibility issue when 64bit DMA mode is used.
bcache: Remove unnecessary NULL point check in node allocations
integrity: Fix possible multiple allocation in integrity_inode_get()
jffs2: reduce stack usage in jffs2_build_xattr_subsystem()
fs: avoid empty option when generating legacy mount string
ext4: Remove ext4 locking of moved directory
Revert "f2fs: fix potential corruption when moving a directory"
fs: Establish locking order for unrelated directories
fs: Lock moved directories
btrfs: fix race when deleting quota root from the dirty cow roots list
ARM: orion5x: fix d2net gpio initialization
fs: no need to check source
fanotify: disallow mount/sb marks on kernel internal pseudo fs
block: add overflow checks for Amiga partition support
netfilter: nf_tables: fix nat hook table deletion
netfilter: nftables: add helper function to set the base sequence number
netfilter: add helper function to set up the nfnetlink header and use it
netfilter: nf_tables: use net_generic infra for transaction data
netfilter: nf_tables: add rescheduling points during loop detection walks
netfilter: nf_tables: incorrect error path handling with NFT_MSG_NEWRULE
netfilter: nf_tables: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain
netfilter: nf_tables: reject unbound anonymous set before commit phase
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
netfilter: nf_tables: fix scheduling-while-atomic splat
netfilter: conntrack: Avoid nf_ct_helper_hash uses after free
netfilter: nf_tables: prevent OOB access in nft_byteorder_eval
tty: serial: fsl_lpuart: add earlycon for imx8ulp platform
block/partition: fix signedness issue for Amiga partitions
net: lan743x: Don't sleep in atomic context
workqueue: clean up WORK_* constant types, clarify masking
drm/panel: Initialise panel dev and funcs through drm_panel_init()
drm/panel: Add and fill drm_panel type field
drm/panel: simple: Add connector_type for innolux_at043tn24
igc: Remove delay during TX ring configuration
igc: set TP bit in 'supported' and 'advertising' fields of ethtool_link_ksettings
scsi: qla2xxx: Fix error code in qla2x00_start_sp()
net: mvneta: fix txq_map in case of txq_number==1
net/sched: cls_fw: Fix improper refcount update leads to use-after-free
ionic: improve irq numa locality
ionic: clean irq affinity on queue deinit
ionic: move irq request to qcq alloc
ionic: ionic_intr_free parameter change
ionic: remove WARN_ON to prevent panic_on_warn
icmp6: Fix null-ptr-deref of ip6_null_entry->rt6i_idev in icmp6_dev().
udp6: fix udp6_ehashfn() typo
ntb: idt: Fix error handling in idt_pci_driver_init()
NTB: amd: Fix error handling in amd_ntb_pci_driver_init()
ntb: intel: Fix error handling in intel_ntb_pci_driver_init()
NTB: ntb_transport: fix possible memory leak while device_register() fails
NTB: ntb_tool: Add check for devm_kcalloc
ipv6/addrconf: fix a potential refcount underflow for idev
platform/x86: wmi: Replace UUID redefinitions by their originals
platform/x86: wmi: Fix indentation in some cases
platform/x86: wmi: remove unnecessary argument
platform/x86: wmi: use guid_t and guid_equal()
platform/x86: wmi: move variables
platform/x86: wmi: Break possible infinite loop when parsing GUID
erofs: avoid infinite loop in z_erofs_do_read_page() when reading beyond EOF
wifi: airo: avoid uninitialized warning in airo_get_rate()
cls_flower: Add extack support for src and dst port range options
net/sched: flower: Ensure both minimum and maximum ports are specified
net/sched: make psched_mtu() RTNL-less safe
pinctrl: amd: Fix mistake in handling clearing pins at startup
pinctrl: amd: Detect internal GPIO0 debounce handling
pinctrl: amd: Only use special debounce behavior for GPIO 0
tpm: tpm_vtpm_proxy: fix a race condition in /dev/vtpmx creation
mtd: rawnand: meson: fix unaligned DMA buffers handling
net: bcmgenet: Ensure MDIO unregistration has clocks enabled
powerpc: Fail build if using recordmcount with binutils v2.37
misc: fastrpc: Create fastrpc scalar with correct buffer count
SUNRPC: Fix UAF in svc_tcp_listen_data_ready()
erofs: fix compact 4B support for 16k block size
ext4: fix wrong unit use in ext4_mb_clear_bb
ext4: only update i_reserved_data_blocks on successful block allocation
jfs: jfs_dmap: Validate db_l2nbperpage while mounting
PCI/PM: Avoid putting EloPOS E2/S2/H2 PCIe Ports in D3cold
PCI: Add function 1 DMA alias quirk for Marvell 88SE9235
PCI: qcom: Disable write access to read only registers for IP v2.3.3
PCI: rockchip: Assert PCI Configuration Enable bit after probe
PCI: rockchip: Write PCI Device ID to correct register
PCI: rockchip: Add poll and timeout to wait for PHY PLLs to be locked
PCI: rockchip: Fix legacy IRQ generation for RK3399 PCIe endpoint core
PCI: rockchip: Use u32 variable to access 32-bit registers
PCI: rockchip: Set address alignment for endpoint mode
misc: pci_endpoint_test: Free IRQs before removing the device
misc: pci_endpoint_test: Re-init completion for every test
md/raid0: add discard support for the 'original' layout
fs: dlm: return positive pid value for F_GETLK
drm/atomic: Allow vblank-enabled + self-refresh "disable"
drm/rockchip: vop: Leave vblank enabled in self-refresh
serial: atmel: don't enable IRQs prematurely
firmware: stratix10-svc: Fix a potential resource leak in svc_create_memory_pool()
hwrng: imx-rngc - fix the timeout for init and self check
ceph: don't let check_caps skip sending responses for revoke msgs
meson saradc: fix clock divider mask length
Revert "8250: add support for ASIX devices with a FIFO bug"
tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() in case of error
tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() when iterating clk
tracing/histograms: Add histograms to hist_vars if they have referenced variables
ring-buffer: Fix deadloop issue on reading trace_pipe
xtensa: ISS: fix call to split_if_spec
tracing: Fix null pointer dereference in tracing_err_log_open()
tracing/probes: Fix not to count error code to total length
scsi: qla2xxx: Wait for io return on terminate rport
scsi: qla2xxx: Fix potential NULL pointer dereference
scsi: qla2xxx: Check valid rport returned by fc_bsg_to_rport()
scsi: qla2xxx: Correct the index of array
scsi: qla2xxx: Pointer may be dereferenced
scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue
drm/atomic: Fix potential use-after-free in nonblocking commits
perf probe: Add test for regression introduced by switch to die_get_decl_file()
btrfs: fix warning when putting transaction with qgroups enabled after abort
fuse: revalidate: don't invalidate if interrupted
selftests: tc: set timeout to 15 minutes
can: bcm: Fix UAF in bcm_proc_show()
drm/client: Fix memory leak in drm_client_target_cloned
drm/client: Fix memory leak in drm_client_modeset_probe
ext4: correct inline offset when handling xattrs in inode body
debugobjects: Recheck debug_objects_enabled before reporting
nbd: Add the maximum limit of allocated index in nbd_dev_add
md: fix data corruption for raid456 when reshape restart while grow up
md/raid10: prevent soft lockup while flush writes
posix-timers: Ensure timer ID search-loop limit is valid
arm64: mm: fix VA-range sanity check
sched/fair: Don't balance task to its current running CPU
bpf: Address KCSAN report on bpf_lru_list
devlink: report devlink_port_type_warn source device
wifi: wext-core: Fix -Wstringop-overflow warning in ioctl_standard_iw_point()
wifi: iwlwifi: mvm: avoid baid size integer overflow
igb: Fix igb_down hung on surprise removal
spi: bcm63xx: fix max prepend length
fbdev: imxfb: warn about invalid left/right margin
pinctrl: amd: Use amd_pinconf_set() for all config options
net: ethernet: ti: cpsw_ale: Fix cpsw_ale_get_field()/cpsw_ale_set_field()
iavf: Fix use-after-free in free_netdev
net:ipv6: check return value of pskb_trim()
Revert "tcp: avoid the lookup process failing to get sk in ehash table"
fbdev: au1200fb: Fix missing IRQ check in au1200fb_drv_probe
llc: Don't drop packet from non-root netns.
netfilter: nf_tables: fix spurious set element insertion failure
netfilter: nf_tables: can't schedule in nft_chain_validate
tcp: annotate data-races around tp->tcp_tx_delay
net: Replace the limit of TCP_LINGER2 with TCP_FIN_TIMEOUT_MAX
tcp: annotate data-races around tp->linger2
tcp: annotate data-races around rskq_defer_accept
tcp: annotate data-races around tp->notsent_lowat
tcp: annotate data-races around fastopenq.max_qlen
tracing/histograms: Return an error if we fail to add histogram to hist_vars list
Linux 5.4.251
Change-Id: I0b8e1ac44b19c6c2c4f5f055395b3cbf6aecbbee
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit afa4bb778e48d79e4a642ed41e3b4e0de7489a6c upstream.
Dave Airlie reports that gcc-13.1.1 has started complaining about some
of the workqueue code in 32-bit arm builds:
kernel/workqueue.c: In function ‘get_work_pwq’:
kernel/workqueue.c:713:24: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
713 | return (void *)(data & WORK_STRUCT_WQ_DATA_MASK);
| ^
[ ... a couple of other cases ... ]
and while it's not immediately clear exactly why gcc started complaining
about it now, I suspect it's some C23-induced enum type handlign fixup in
gcc-13 is the cause.
Whatever the reason for starting to complain, the code and data types
are indeed disgusting enough that the complaint is warranted.
The wq code ends up creating various "helper constants" (like that
WORK_STRUCT_WQ_DATA_MASK) using an enum type, which is all kinds of
confused. The mask needs to be 'unsigned long', not some unspecified
enum type.
To make matters worse, the actual "mask and cast to a pointer" is
repeated a couple of times, and the cast isn't even always done to the
right pointer, but - as the error case above - to a 'void *' with then
the compiler finishing the job.
That's now how we roll in the kernel.
So create the masks using the proper types rather than some ambiguous
enumeration, and use a nice helper that actually does the type
conversion in one well-defined place.
Incidentally, this magically makes clang generate better code. That,
admittedly, is really just a sign of clang having been seriously
confused before, and cleaning up the typing unconfuses the compiler too.
Reported-by: Dave Airlie <airlied@gmail.com>
Link: https://lore.kernel.org/lkml/CAPM=9twNnV4zMCvrPkw3H-ajZOH-01JVh_kDrxdPYQErz8ZTdA@mail.gmail.com/
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Try to mitigate potential future driver core api changes by adding a
padding to struct work_struct and struct delayed_work
Based on a change made to the RHEL/CENTOS 8 kernel.
Leaf changes summary: 129 artifacts changed
Changed leaf types summary: 129 leaf types changed
Removed/Changed/Added functions summary: 0 Removed, 0 Changed, 0 Added function
Removed/Changed/Added variables summary: 0 Removed, 0 Changed, 0 Added variable
type 'struct work_struct' changed:
type size changed from 256 to 384 (in bits)
2 data member insertions:
'u64 work_struct::android_kabi_reserved1', at offset 256 (in bits) at workqueue.h:110:1
'u64 work_struct::android_kabi_reserved2', at offset 320 (in bits) at workqueue.h:111:1
type 'struct delayed_work' changed:
type size changed from 704 to 960 (in bits)
2 data member insertions:
'u64 delayed_work::android_kabi_reserved1', at offset 832 (in bits) at workqueue.h:126:1
'u64 delayed_work::android_kabi_reserved2', at offset 896 (in bits) at workqueue.h:127:1
Bug: 151154716
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I5492a13e2430c1a5775aec52518144b7aa4f3268
None of those functions have any users outside of workqueue.c. Confine
them.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull driver core updates from Greg KH:
"Here is the big driver core patchset for 5.1-rc1
More patches than "normal" here this merge window, due to some work in
the driver core by Alexander Duyck to rework the async probe
functionality to work better for a number of devices, and independant
work from Rafael for the device link functionality to make it work
"correctly".
Also in here is:
- lots of BUS_ATTR() removals, the macro is about to go away
- firmware test fixups
- ihex fixups and simplification
- component additions (also includes i915 patches)
- lots of minor coding style fixups and cleanups.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (65 commits)
driver core: platform: remove misleading err_alloc label
platform: set of_node in platform_device_register_full()
firmware: hardcode the debug message for -ENOENT
driver core: Add missing description of new struct device_link field
driver core: Fix PM-runtime for links added during consumer probe
drivers/component: kerneldoc polish
async: Add cmdline option to specify drivers to be async probed
driver core: Fix possible supplier PM-usage counter imbalance
PM-runtime: Fix __pm_runtime_set_status() race with runtime resume
driver: platform: Support parsing GpioInt 0 in platform_get_irq()
selftests: firmware: fix verify_reqs() return value
Revert "selftests: firmware: remove use of non-standard diff -Z option"
Revert "selftests: firmware: add CONFIG_FW_LOADER_USER_HELPER_FALLBACK to config"
device: Fix comment for driver_data in struct device
kernfs: Allocating memory for kernfs_iattrs with kmem_cache.
sysfs: remove unused include of kernfs-internal.h
driver core: Postpone DMA tear-down until after devres release
driver core: Document limitation related to DL_FLAG_RPM_ACTIVE
PM-runtime: Take suppliers into account in __pm_runtime_set_status()
device.h: Add __cold to dev_<level> logging functions
...
The following commit:
87915adc3f ("workqueue: re-add lockdep dependencies for flushing")
improved deadlock checking in the workqueue implementation. Unfortunately
that patch also introduced a few false positive lockdep complaints.
This patch suppresses these false positives by allocating the workqueue mutex
lockdep key dynamically.
An example of a false positive lockdep complaint suppressed by this patch
can be found below. The root cause of the lockdep complaint shown below
is that the direct I/O code can call alloc_workqueue() from inside a work
item created by another alloc_workqueue() call and that both workqueues
share the same lockdep key. This patch avoids that that lockdep complaint
is triggered by allocating the work queue lockdep keys dynamically.
In other words, this patch guarantees that a unique lockdep key is
associated with each work queue mutex.
======================================================
WARNING: possible circular locking dependency detected
4.19.0-dbg+ #1 Not tainted
fio/4129 is trying to acquire lock:
00000000a01cfe1a ((wq_completion)"dio/%s"sb->s_id){+.+.}, at: flush_workqueue+0xd0/0x970
but task is already holding lock:
00000000a0acecf9 (&sb->s_type->i_mutex_key#14){+.+.}, at: ext4_file_write_iter+0x154/0x710
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&sb->s_type->i_mutex_key#14){+.+.}:
down_write+0x3d/0x80
__generic_file_fsync+0x77/0xf0
ext4_sync_file+0x3c9/0x780
vfs_fsync_range+0x66/0x100
dio_complete+0x2f5/0x360
dio_aio_complete_work+0x1c/0x20
process_one_work+0x481/0x9f0
worker_thread+0x63/0x5a0
kthread+0x1cf/0x1f0
ret_from_fork+0x24/0x30
-> #1 ((work_completion)(&dio->complete_work)){+.+.}:
process_one_work+0x447/0x9f0
worker_thread+0x63/0x5a0
kthread+0x1cf/0x1f0
ret_from_fork+0x24/0x30
-> #0 ((wq_completion)"dio/%s"sb->s_id){+.+.}:
lock_acquire+0xc5/0x200
flush_workqueue+0xf3/0x970
drain_workqueue+0xec/0x220
destroy_workqueue+0x23/0x350
sb_init_dio_done_wq+0x6a/0x80
do_blockdev_direct_IO+0x1f33/0x4be0
__blockdev_direct_IO+0x79/0x86
ext4_direct_IO+0x5df/0xbb0
generic_file_direct_write+0x119/0x220
__generic_file_write_iter+0x131/0x2d0
ext4_file_write_iter+0x3fa/0x710
aio_write+0x235/0x330
io_submit_one+0x510/0xeb0
__x64_sys_io_submit+0x122/0x340
do_syscall_64+0x71/0x220
entry_SYSCALL_64_after_hwframe+0x49/0xbe
other info that might help us debug this:
Chain exists of:
(wq_completion)"dio/%s"sb->s_id --> (work_completion)(&dio->complete_work) --> &sb->s_type->i_mutex_key#14
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&sb->s_type->i_mutex_key#14);
lock((work_completion)(&dio->complete_work));
lock(&sb->s_type->i_mutex_key#14);
lock((wq_completion)"dio/%s"sb->s_id);
*** DEADLOCK ***
1 lock held by fio/4129:
#0: 00000000a0acecf9 (&sb->s_type->i_mutex_key#14){+.+.}, at: ext4_file_write_iter+0x154/0x710
stack backtrace:
CPU: 3 PID: 4129 Comm: fio Not tainted 4.19.0-dbg+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
Call Trace:
dump_stack+0x86/0xc5
print_circular_bug.isra.32+0x20a/0x218
__lock_acquire+0x1c68/0x1cf0
lock_acquire+0xc5/0x200
flush_workqueue+0xf3/0x970
drain_workqueue+0xec/0x220
destroy_workqueue+0x23/0x350
sb_init_dio_done_wq+0x6a/0x80
do_blockdev_direct_IO+0x1f33/0x4be0
__blockdev_direct_IO+0x79/0x86
ext4_direct_IO+0x5df/0xbb0
generic_file_direct_write+0x119/0x220
__generic_file_write_iter+0x131/0x2d0
ext4_file_write_iter+0x3fa/0x710
aio_write+0x235/0x330
io_submit_one+0x510/0xeb0
__x64_sys_io_submit+0x122/0x340
do_syscall_64+0x71/0x220
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://lkml.kernel.org/r/20190214230058.196511-20-bvanassche@acm.org
[ Reworked the changelog a bit. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Provide a new function, queue_work_node, which is meant to schedule work on
a "random" CPU of the requested NUMA node. The main motivation for this is
to help assist asynchronous init to better improve boot times for devices
that are local to a specific node.
For now we just default to the first CPU that is in the intersection of the
cpumask of the node and the online cpumask. The only exception is if the
CPU is local to the node we will just use the current CPU. This should work
for our purposes as we are currently only using this for unbound work so
the CPU will be translated to a node anyway instead of being directly used.
As we are only using the first CPU to represent the NUMA node for now I am
limiting the scope of the function so that it can only be used with unbound
workqueues.
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There can be a lot of workqueue workers and they all show up with the
cryptic kworker/* names making it difficult to understand which is
doing what and how they came to be.
# ps -ef | grep kworker
root 4 2 0 Feb25 ? 00:00:00 [kworker/0:0H]
root 6 2 0 Feb25 ? 00:00:00 [kworker/u112:0]
root 19 2 0 Feb25 ? 00:00:00 [kworker/1:0H]
root 25 2 0 Feb25 ? 00:00:00 [kworker/2:0H]
root 31 2 0 Feb25 ? 00:00:00 [kworker/3:0H]
...
This patch makes workqueue workers report the latest workqueue it was
executing for through /proc/PID/{comm,stat,status}. The extra
information is appended to the kthread name with intervening '+' if
currently executing, otherwise '-'.
# cat /proc/25/comm
kworker/2:0-events_power_efficient
# cat /proc/25/stat
25 (kworker/2:0-events_power_efficient) I 2 0 0 0 -1 69238880 0 0...
# grep Name /proc/25/status
Name: kworker/2:0-events_power_efficient
Unfortunately, ps(1) truncates comm to 15 characters,
# ps 25
PID TTY STAT TIME COMMAND
25 ? I 0:00 [kworker/2:0-eve]
making it a lot less useful; however, this should be an easy fix from
ps(1) side.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Craig Small <csmall@enc.com.au>
Pull workqueue updates from Tejun Heo:
"rcu_work addition and a couple trivial changes"
* 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: remove the comment about the old manager_arb mutex
workqueue: fix the comments of nr_idle
fs/aio: Use rcu_work instead of explicit rcu and work item
cgroup: Use rcu_work instead of explicit rcu and work item
RCU, workqueue: Implement rcu_work
There are cases where RCU callback needs to be bounced to a sleepable
context. This is currently done by the RCU callback queueing a work
item, which can be cumbersome to write and confusing to read.
This patch introduces rcu_work, a workqueue work variant which gets
executed after a RCU grace period, and converts the open coded
bouncing in fs/aio and kernel/cgroup.
v3: Dropped queue_rcu_work_on(). Documented rcu grace period behavior
after queue_rcu_work().
v2: Use rcu_barrier() instead of synchronize_rcu() to wait for
completion of previously queued rcu callback as per Paul.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Found this by accident.
There are no usages of bare cancel_work() in current kernel source.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
With all callbacks converted, and the timer callback prototype
switched over, the TIMER_FUNC_TYPE cast is no longer needed,
so remove it. Conversion was done with the following scripts:
perl -pi -e 's|\(TIMER_FUNC_TYPE\)||g' \
$(git grep TIMER_FUNC_TYPE | cut -d: -f1 | sort -u)
perl -pi -e 's|\(TIMER_DATA_TYPE\)||g' \
$(git grep TIMER_DATA_TYPE | cut -d: -f1 | sort -u)
The now unused macros are also dropped from include/linux/timer.h.
Signed-off-by: Kees Cook <keescook@chromium.org>
Pull timer updates from Thomas Gleixner:
"Yet another big pile of changes:
- More year 2038 work from Arnd slowly reaching the point where we
need to think about the syscalls themself.
- A new timer function which allows to conditionally (re)arm a timer
only when it's either not running or the new expiry time is sooner
than the armed expiry time. This allows to use a single timer for
multiple timeout requirements w/o caring about the first expiry
time at the call site.
- A new NMI safe accessor to clock real time for the printk timestamp
work. Can be used by tracing, perf as well if required.
- A large number of timer setup conversions from Kees which got
collected here because either maintainers requested so or they
simply got ignored. As Kees pointed out already there are a few
trivial merge conflicts and some redundant commits which was
unavoidable due to the size of this conversion effort.
- Avoid a redundant iteration in the timer wheel softirq processing.
- Provide a mechanism to treat RTC implementations depending on their
hardware properties, i.e. don't inflict the write at the 0.5
seconds boundary which originates from the PC CMOS RTC to all RTCs.
No functional change as drivers need to be updated separately.
- The usual small updates to core code clocksource drivers. Nothing
really exciting"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
timers: Add a function to start/reduce a timer
pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()
timer: Prepare to change all DEFINE_TIMER() callbacks
netfilter: ipvs: Convert timers to use timer_setup()
scsi: qla2xxx: Convert timers to use timer_setup()
block/aoe: discover_timer: Convert timers to use timer_setup()
ide: Convert timers to use timer_setup()
drbd: Convert timers to use timer_setup()
mailbox: Convert timers to use timer_setup()
crypto: Convert timers to use timer_setup()
drivers/pcmcia: omap1: Fix error in automated timer conversion
ARM: footbridge: Fix typo in timer conversion
drivers/sgi-xp: Convert timers to use timer_setup()
drivers/pcmcia: Convert timers to use timer_setup()
drivers/memstick: Convert timers to use timer_setup()
drivers/macintosh: Convert timers to use timer_setup()
hwrng/xgene-rng: Convert timers to use timer_setup()
auxdisplay: Convert timers to use timer_setup()
sparc/led: Convert timers to use timer_setup()
mips: ip22/32: Convert timers to use timer_setup()
...
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 0a94efb5ac ("workqueue: implicit ordered attribute should be
overridable") introduced a __WQ_ORDERED_EXPLICIT flag but gave it the
same value as __WQ_LEGACY. I don't believe these were intended to
mean the same thing, so renumber __WQ_ORDERED_EXPLICIT.
Fixes: 0a94efb5ac ("workqueue: implicit ordered attribute should be ...")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: stable@vger.kernel.org # v4.13
Signed-off-by: Tejun Heo <tj@kernel.org>
5c0338c687 ("workqueue: restore WQ_UNBOUND/max_active==1 to be
ordered") automatically enabled ordered attribute for unbound
workqueues w/ max_active == 1. Because ordered workqueues reject
max_active and some attribute changes, this implicit ordered mode
broke cases where the user creates an unbound workqueue w/ max_active
== 1 and later explicitly changes the related attributes.
This patch distinguishes explicit and implicit ordered setting and
overrides from attribute changes if implict.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 5c0338c687 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
Pull workqueue updates from Tejun Heo:
"Mostly patches to initialize workqueue subsystem earlier and get rid
of keventd_up().
The patches were headed for the last merge cycle but got delayed due
to a bug found late minute, which is fixed now.
Also, to help debugging, destroy_workqueue() is more chatty now on a
sanity check failure."
* 'for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: move wq_numa_init() to workqueue_init()
workqueue: remove keventd_up()
debugobj, workqueue: remove keventd_up() usage
slab, workqueue: remove keventd_up() usage
power, workqueue: remove keventd_up() usage
tty, workqueue: remove keventd_up() usage
mce, workqueue: remove keventd_up() usage
workqueue: make workqueue available early during boot
workqueue: dump workqueue state on sanity check failures in destroy_workqueue()
Workqueue is currently initialized in an early init call; however,
there are cases where early boot code has to be split and reordered to
come after workqueue initialization or the same code path which makes
use of workqueues is used both before workqueue initailization and
after. The latter cases have to gate workqueue usages with
keventd_up() tests, which is nasty and easy to get wrong.
Workqueue usages have become widespread and it'd be a lot more
convenient if it can be used very early from boot. This patch splits
workqueue initialization into two steps. workqueue_init_early() which
sets up the basic data structures so that workqueues can be created
and work items queued, and workqueue_init() which actually brings up
workqueues online and starts executing queued work items. The former
step can be done very early during boot once memory allocation,
cpumasks and idr are initialized. The latter right after kthreads
become available.
This allows work item queueing and canceling from very early boot
which is what most of these use cases want.
* As systemd_wq being initialized doesn't indicate that workqueue is
fully online anymore, update keventd_up() to test wq_online instead.
The follow-up patches will get rid of all its usages and the
function itself.
* Flushing doesn't make sense before workqueue is fully initialized.
The flush functions trigger WARN and return immediately before fully
online.
* Work items are never in-flight before fully online. Canceling can
always succeed by skipping the flush step.
* Some code paths can no longer assume to be called with irq enabled
as irq is disabled during early boot. Use irqsave/restore
operations instead.
v2: Watchdog init, which requires timer to be running, moved from
workqueue_init_early() to workqueue_init().
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/CA+55aFx0vPuMuxn00rBSM192n-Du5uxy+4AvKa0SBSOVJeuCGg@mail.gmail.com
fca839c00a ("workqueue: warn if memory reclaim tries to flush
!WQ_MEM_RECLAIM workqueue") implemented flush dependency warning which
triggers if a PF_MEMALLOC task or WQ_MEM_RECLAIM workqueue tries to
flush a !WQ_MEM_RECLAIM workquee.
This assumes that workqueues marked with WQ_MEM_RECLAIM sit in memory
reclaim path and making it depend on something which may need more
memory to make forward progress can lead to deadlocks. Unfortunately,
workqueues created with the legacy create*_workqueue() interface
always have WQ_MEM_RECLAIM regardless of whether they are depended
upon memory reclaim or not. These spurious WQ_MEM_RECLAIM markings
cause spurious triggering of the flush dependency checks.
WARNING: CPU: 0 PID: 6 at kernel/workqueue.c:2361 check_flush_dependency+0x138/0x144()
workqueue: WQ_MEM_RECLAIM deferwq:deferred_probe_work_func is flushing !WQ_MEM_RECLAIM events:lru_add_drain_per_cpu
...
Workqueue: deferwq deferred_probe_work_func
[<c0017acc>] (unwind_backtrace) from [<c0013134>] (show_stack+0x10/0x14)
[<c0013134>] (show_stack) from [<c0245f18>] (dump_stack+0x94/0xd4)
[<c0245f18>] (dump_stack) from [<c0026f9c>] (warn_slowpath_common+0x80/0xb0)
[<c0026f9c>] (warn_slowpath_common) from [<c0026ffc>] (warn_slowpath_fmt+0x30/0x40)
[<c0026ffc>] (warn_slowpath_fmt) from [<c00390b8>] (check_flush_dependency+0x138/0x144)
[<c00390b8>] (check_flush_dependency) from [<c0039ca0>] (flush_work+0x50/0x15c)
[<c0039ca0>] (flush_work) from [<c00c51b0>] (lru_add_drain_all+0x130/0x180)
[<c00c51b0>] (lru_add_drain_all) from [<c00f728c>] (migrate_prep+0x8/0x10)
[<c00f728c>] (migrate_prep) from [<c00bfbc4>] (alloc_contig_range+0xd8/0x338)
[<c00bfbc4>] (alloc_contig_range) from [<c00f8f18>] (cma_alloc+0xe0/0x1ac)
[<c00f8f18>] (cma_alloc) from [<c001cac4>] (__alloc_from_contiguous+0x38/0xd8)
[<c001cac4>] (__alloc_from_contiguous) from [<c001ceb4>] (__dma_alloc+0x240/0x278)
[<c001ceb4>] (__dma_alloc) from [<c001cf78>] (arm_dma_alloc+0x54/0x5c)
[<c001cf78>] (arm_dma_alloc) from [<c0355ea4>] (dmam_alloc_coherent+0xc0/0xec)
[<c0355ea4>] (dmam_alloc_coherent) from [<c039cc4c>] (ahci_port_start+0x150/0x1dc)
[<c039cc4c>] (ahci_port_start) from [<c0384734>] (ata_host_start.part.3+0xc8/0x1c8)
[<c0384734>] (ata_host_start.part.3) from [<c03898dc>] (ata_host_activate+0x50/0x148)
[<c03898dc>] (ata_host_activate) from [<c039d558>] (ahci_host_activate+0x44/0x114)
[<c039d558>] (ahci_host_activate) from [<c039f05c>] (ahci_platform_init_host+0x1d8/0x3c8)
[<c039f05c>] (ahci_platform_init_host) from [<c039e6bc>] (tegra_ahci_probe+0x448/0x4e8)
[<c039e6bc>] (tegra_ahci_probe) from [<c0347058>] (platform_drv_probe+0x50/0xac)
[<c0347058>] (platform_drv_probe) from [<c03458cc>] (driver_probe_device+0x214/0x2c0)
[<c03458cc>] (driver_probe_device) from [<c0343cc0>] (bus_for_each_drv+0x60/0x94)
[<c0343cc0>] (bus_for_each_drv) from [<c03455d8>] (__device_attach+0xb0/0x114)
[<c03455d8>] (__device_attach) from [<c0344ab8>] (bus_probe_device+0x84/0x8c)
[<c0344ab8>] (bus_probe_device) from [<c0344f48>] (deferred_probe_work_func+0x68/0x98)
[<c0344f48>] (deferred_probe_work_func) from [<c003b738>] (process_one_work+0x120/0x3f8)
[<c003b738>] (process_one_work) from [<c003ba48>] (worker_thread+0x38/0x55c)
[<c003ba48>] (worker_thread) from [<c0040f14>] (kthread+0xdc/0xf4)
[<c0040f14>] (kthread) from [<c000f778>] (ret_from_fork+0x14/0x3c)
Fix it by marking workqueues created via create*_workqueue() with
__WQ_LEGACY and disabling flush dependency checks on them.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Thierry Reding <thierry.reding@gmail.com>
Link: http://lkml.kernel.org/g/20160126173843.GA11115@ulmo.nvidia.com
Fixes: fca839c00a ("workqueue: warn if memory reclaim tries to flush !WQ_MEM_RECLAIM workqueue")
Workqueue stalls can happen from a variety of usage bugs such as
missing WQ_MEM_RECLAIM flag or concurrency managed work item
indefinitely staying RUNNING. These stalls can be extremely difficult
to hunt down because the usual warning mechanisms can't detect
workqueue stalls and the internal state is pretty opaque.
To alleviate the situation, this patch implements workqueue lockup
detector. It periodically monitors all worker_pools periodically and,
if any pool failed to make forward progress longer than the threshold
duration, triggers warning and dumps workqueue state as follows.
BUG: workqueue lockup - pool cpus=0 node=0 flags=0x0 nice=0 stuck for 31s!
Showing busy workqueues and worker pools:
workqueue events: flags=0x0
pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=17/256
pending: monkey_wrench_fn, e1000_watchdog, cache_reap, vmstat_shepherd, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, cgroup_release_agent
workqueue events_power_efficient: flags=0x80
pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=2/256
pending: check_lifetime, neigh_periodic_work
workqueue cgroup_pidlist_destroy: flags=0x0
pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/1
pending: cgroup_pidlist_destroy_work_fn
...
The detection mechanism is controller through kernel parameter
workqueue.watchdog_thresh and can be updated at runtime through the
sysfs module parameter file.
v2: Decoupled from softlockup control knobs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Don Zickus <dzickus@redhat.com>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Chris Mason <clm@fb.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
There are some errors in the docbook comments in workqueue.h that cause
warnings when the docs are built; this only recently came to light because
these comments were not used until now. Fix the comments to make the
warnings go away.
The "args..." "fix" is a hack. kerneldoc doesn't deal properly with named
variadic arguments in macros, so all I've really achieved here is to make
it shut up. Fixing kerneldoc will have to wait for more time.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Tejun Heo <tj@kernel.org>
flush_scheduled_work() is just a simple call to flush_work().
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Allow to modify the low-level unbound workqueues cpumask through
sysfs. This is performed by traversing the entire workqueue list
and calling apply_wqattrs_prepare() on the unbound workqueues
with the new low level mask. Only after all the preparation are done,
we commit them all together.
Ordered workqueues are ignored from the low level unbound workqueue
cpumask, it will be handled in near future.
All the (default & per-node) pwqs are mandatorily controlled by
the low level cpumask. If the user configured cpumask doesn't overlap
with the low level cpumask, the low level cpumask will be used for the
wq instead.
The comment of wq_calc_node_cpumask() is updated and explicitly
requires that its first argument should be the attrs of the default
pwq.
The default wq_unbound_cpumask is cpu_possible_mask. The workqueue
subsystem doesn't know its best default value, let the system manager
or the other subsystem set it when needed.
Changed from V8:
merge the calculating code for the attrs of the default pwq together.
minor change the code&comments for saving the user configured attrs.
remove unnecessary list_del().
minor update the comment of wq_calc_node_cpumask().
update the comment of workqueue_set_unbound_cpumask();
Cc: Christoph Lameter <cl@linux.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Mike Galbraith <bitbucket@online.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Workqueues are used extensively throughout the kernel but sometimes
it's difficult to debug stalls involving work items because visibility
into its inner workings is fairly limited. Although sysrq-t task dump
annotates each active worker task with the information on the work
item being executed, it is challenging to find out which work items
are pending or delayed on which queues and how pools are being
managed.
This patch implements show_workqueue_state() which dumps all busy
workqueues and pools and is called from the sysrq-t handler. At the
end of sysrq-t dump, something like the following is printed.
Showing busy workqueues and worker pools:
...
workqueue filler_wq: flags=0x0
pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=2/256
in-flight: 491:filler_workfn, 507:filler_workfn
pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=2/256
in-flight: 501:filler_workfn
pending: filler_workfn
...
workqueue test_wq: flags=0x8
pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=1/1
in-flight: 510(RESCUER):test_workfn BAR(69) BAR(500)
delayed: test_workfn1 BAR(492), test_workfn2
...
pool 0: cpus=0 node=0 flags=0x0 nice=0 workers=2 manager: 137
pool 2: cpus=1 node=0 flags=0x0 nice=0 workers=3 manager: 469
pool 3: cpus=1 node=0 flags=0x0 nice=-20 workers=2 idle: 16
pool 8: cpus=0-3 flags=0x4 nice=0 workers=2 manager: 62
The above shows that test_wq is executing test_workfn() on pid 510
which is the rescuer and also that there are two tasks 69 and 500
waiting for the work item to finish in flush_work(). As test_wq has
max_active of 1, there are two work items for test_workfn1() and
test_workfn2() which are delayed till the current work item is
finished. In addition, pid 492 is flushing test_workfn1().
The work item for test_workfn() is being executed on pwq of pool 2
which is the normal priority per-cpu pool for CPU 1. The pool has
three workers, two of which are executing filler_workfn() for
filler_wq and the last one is assuming the manager role trying to
create more workers.
This extra workqueue state dump will hopefully help chasing down hangs
involving workqueues.
v3: cpulist_pr_cont() replaced with "%*pbl" printf formatting.
v2: As suggested by Andrew, minor formatting change in pr_cont_work(),
printk()'s replaced with pr_info()'s, and cpumask printing now
uses cpulist_pr_cont().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
CC: Ingo Molnar <mingo@redhat.com>
cancel[_delayed]_work_sync() are implemented using
__cancel_work_timer() which grabs the PENDING bit using
try_to_grab_pending() and then flushes the work item with PENDING set
to prevent the on-going execution of the work item from requeueing
itself.
try_to_grab_pending() can always grab PENDING bit without blocking
except when someone else is doing the above flushing during
cancelation. In that case, try_to_grab_pending() returns -ENOENT. In
this case, __cancel_work_timer() currently invokes flush_work(). The
assumption is that the completion of the work item is what the other
canceling task would be waiting for too and thus waiting for the same
condition and retrying should allow forward progress without excessive
busy looping
Unfortunately, this doesn't work if preemption is disabled or the
latter task has real time priority. Let's say task A just got woken
up from flush_work() by the completion of the target work item. If,
before task A starts executing, task B gets scheduled and invokes
__cancel_work_timer() on the same work item, its try_to_grab_pending()
will return -ENOENT as the work item is still being canceled by task A
and flush_work() will also immediately return false as the work item
is no longer executing. This puts task B in a busy loop possibly
preventing task A from executing and clearing the canceling state on
the work item leading to a hang.
task A task B worker
executing work
__cancel_work_timer()
try_to_grab_pending()
set work CANCELING
flush_work()
block for work completion
completion, wakes up A
__cancel_work_timer()
while (forever) {
try_to_grab_pending()
-ENOENT as work is being canceled
flush_work()
false as work is no longer executing
}
This patch removes the possible hang by updating __cancel_work_timer()
to explicitly wait for clearing of CANCELING rather than invoking
flush_work() after try_to_grab_pending() fails with -ENOENT.
Link: http://lkml.kernel.org/g/20150206171156.GA8942@axis.com
v3: bit_waitqueue() can't be used for work items defined in vmalloc
area. Switched to custom wake function which matches the target
work item and exclusive wait and wakeup.
v2: v1 used wake_up() on bit_waitqueue() which leads to NULL deref if
the target bit waitqueue has wait_bit_queue's on it. Use
DEFINE_WAIT_BIT() and __wake_up_bit() instead. Reported by Tomeu
Vizoso.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Rabin Vincent <rabin.vincent@axis.com>
Cc: Tomeu Vizoso <tomeu.vizoso@gmail.com>
Cc: stable@vger.kernel.org
Tested-by: Jesper Nilsson <jesper.nilsson@axis.com>
Tested-by: Rabin Vincent <rabin.vincent@axis.com>
checkpatch.pl complained about two single statement macros in
do while (0) loops. The loops and the trailing semicolons are
now removed, which makes checkpatch happy and the two macros
consistent with the rest of the file.
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
create_singlethread_workqueue() is a compat interface for single
threaded workqueue which maps to ordered workqueue w/ rescuer in the
current implementation. create_singlethread_workqueue() currently
implemented by invoking alloc_workqueue() w/ appropriate parameters.
8719dceae2 ("workqueue: reject adjusting max_active or applying
attrs to ordered workqueues") introduced __WQ_ORDERED to protect
ordered workqueues against dynamic attribute changes which can break
ordering guarantees but forgot to apply it to
create_singlethread_workqueue(). This in itself is okay as nobody
currently uses dynamic attribute change on workqueues created with
create_singlethread_workqueue().
However, 4c16bd327c ("workqueue: implement NUMA affinity for unbound
workqueues") broke singlethreaded guarantee for ordered workqueues
through allocating a separate pool_workqueue on each NUMA node by
default. A later change 8a2b753844 ("workqueue: fix ordered
workqueues in NUMA setups") fixed it by allocating only one global
pool_workqueue if __WQ_ORDERED is set.
Combined, the __WQ_ORDERED omission in create_singlethread_workqueue()
became critical breaking its single threadedness and ordering
guarantee.
Let's make create_singlethread_workqueue() wrap
alloc_ordered_workqueue() instead so that it inherits __WQ_ORDERED and
can implicitly track future ordered_workqueue changes.
v2: I missed that __WQ_ORDERED now protects against pwq splitting
across NUMA nodes and incorrectly described the patch as a
nice-to-have fix to protect against future dynamic attribute
usages. Oleg pointed out that this is actually a critical
breakage due to 8a2b753844 ("workqueue: fix ordered workqueues
in NUMA setups").
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Mike Anderson <mike.anderson@us.ibm.com>
Cc: Oleg Nesterov <onestero@redhat.com>
Cc: Gustavo Luiz Duarte <gduarte@redhat.com>
Cc: Tomas Henzl <thenzl@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 4c16bd327c ("workqueue: implement NUMA affinity for unbound workqueues")
In 8930caba3d ("workqueue: disable irq while manipulating PENDING"),
setting last CPU and clearing PENDING got merged into a single
operation (set_work_cpu_and_clear_pending()), which resulted that the
internal routine work_clear_pending() is not used any more.
tj: Minor description tweak.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
WORK_CPU_END is totally unused since 4e8b22bd1a ("workqueue: fix
pool ID allocation leakage and remove BUILD_BUG_ON() in
init_workqueues"). It should be removed.
After it is removed, the comment "special cpu IDs" is not precise due to
there is only one special CPU ID (WORK_CPU_UNBOUND) left, so we also
change this comment to the description for WORK_CPU_UNBOUND.
tj: Minor description and comment tweaks.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
system_highpri_wq is exported to modules via EXPORT_SYMBOL_GPL(),
but it was forgotten to be declared in workqueue.h. So we add the declaration
and a short description for it.
tj: Minor comment tweak.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
system_nrt[_freezable]_wq were deprecated by 3b07e9c ("workqueue:
deprecate system_nrt[_freezable]_wq") and have been deprecated
for a long time. In addition, these are not used anymore. So,
let's remove these functions.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
flush[_delayed]_work_sync() were deprecated by 4382973 ("workqueue:
deprecate flush[_delayed]_work_sync()") and have been deprecated
for a long time. In addition, these are not used anymore. So,
let's remove these functions.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull timer changes from Thomas Gleixner:
"This assorted collection provides:
- A new timer based timer broadcast feature for systems which do not
provide a global accessible timer device. That allows those
systems to put CPUs into deep idle states where the per cpu timer
device stops.
- A few NOHZ_FULL related improvements to the timer wheel
- The usual updates to timer devices found in ARM SoCs
- Small improvements and updates all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
tick: Remove code duplication in tick_handle_periodic()
tick: Fix spelling mistake in tick_handle_periodic()
x86: hpet: Use proper destructor for delayed work
workqueue: Provide destroy_delayed_work_on_stack()
clocksource: CMT, MTU2, TMU and STI should depend on GENERIC_CLOCKEVENTS
timer: Remove code redundancy while calling get_nohz_timer_target()
hrtimer: Rearrange comments in the order struct members are declared
timer: Use variable head instead of &work_list in __run_timers()
clocksource: exynos_mct: silence a static checker warning
arm: zynq: Add support for cpufreq
arm: zynq: Don't use arm_global_timer with cpufreq
clocksource/cadence_ttc: Overhaul clocksource frequency adjustment
clocksource/cadence_ttc: Call clockevents_update_freq() with IRQs enabled
clocksource: Add Kconfig entries for CMT, MTU2, TMU and STI
sh: Remove Kconfig entries for TMU, CMT and MTU2
ARM: shmobile: Remove CMT, TMU and STI Kconfig entries
clocksource: armada-370-xp: Use atomic access for shared registers
clocksource: orion: Use atomic access for shared registers
clocksource: timer-keystone: Delete unnecessary variable
clocksource: timer-keystone: introduce clocksource driver for Keystone
...
Tejun Heo has made WQ_NON_REENTRANT useless in the dbf2576e37
("workqueue: make all workqueues non-reentrant"). So remove its
usages and definition.
This patch doesn't introduce any behavior changes.
tj: minor description updates.
Signed-off-by: ZhangZhen <zhenzhang.zhang@huawei.com>
Sigend-off-by: Tejun Heo <tj@kernel.org>
Acked-by: James Chapman <jchapman@katalix.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
