* refs/heads/tmp-d6bbe8b
Linux 4.4.127
Revert "ip6_vti: adjust vti mtu according to mtu of lower device"
net: cavium: liquidio: fix up "Avoid dma_unmap_single on uninitialized ndata"
spi: davinci: fix up dma_mapping_error() incorrect patch
Revert "mtip32xx: use runtime tag to initialize command header"
Revert "cpufreq: Fix governor module removal race"
Revert "ARM: dts: omap3-n900: Fix the audio CODEC's reset pin"
Revert "ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin"
Revert "PCI/MSI: Stop disabling MSI/MSI-X in pci_device_shutdown()"
nospec: Kill array_index_nospec_mask_check()
nospec: Move array_index_nospec() parameter checking into separate macro
net: hns: Fix ethtool private flags
md/raid10: reset the 'first' at the end of loop
ARM: dts: am57xx-beagle-x15-common: Add overide powerhold property
ARM: dts: dra7: Add power hold and power controller properties to palmas
Documentation: pinctrl: palmas: Add ti,palmas-powerhold-override property definition
vt: change SGR 21 to follow the standards
Input: i8042 - enable MUX on Sony VAIO VGN-CS series to fix touchpad
Input: i8042 - add Lenovo ThinkPad L460 to i8042 reset list
staging: comedi: ni_mio_common: ack ai fifo error interrupts.
fs/proc: Stop trying to report thread stacks
crypto: x86/cast5-avx - fix ECB encryption when long sg follows short one
crypto: ahash - Fix early termination in hash walk
parport_pc: Add support for WCH CH382L PCI-E single parallel port card.
media: usbtv: prevent double free in error case
mei: remove dev_err message on an unsupported ioctl
USB: serial: cp210x: add ELDAT Easywave RX09 id
USB: serial: ftdi_sio: add support for Harman FirmwareHubEmulator
USB: serial: ftdi_sio: add RT Systems VX-8 cable
usb: dwc2: Improve gadget state disconnection handling
scsi: virtio_scsi: always read VPD pages for multiqueue too
llist: clang: introduce member_address_is_nonnull()
Bluetooth: Fix missing encryption refresh on Security Request
netfilter: x_tables: add and use xt_check_proc_name
netfilter: bridge: ebt_among: add more missing match size checks
xfrm: Refuse to insert 32 bit userspace socket policies on 64 bit systems
net: xfrm: use preempt-safe this_cpu_read() in ipcomp_alloc_tfms()
RDMA/ucma: Introduce safer rdma_addr_size() variants
RDMA/ucma: Don't allow join attempts for unsupported AF family
RDMA/ucma: Check that device exists prior to accessing it
RDMA/ucma: Check that device is connected prior to access it
RDMA/ucma: Ensure that CM_ID exists prior to access it
RDMA/ucma: Fix use-after-free access in ucma_close
RDMA/ucma: Check AF family prior resolving address
xfrm_user: uncoditionally validate esn replay attribute struct
arm64: avoid overflow in VA_START and PAGE_OFFSET
selinux: Remove redundant check for unknown labeling behavior
netfilter: ctnetlink: Make some parameters integer to avoid enum mismatch
tty: provide tty_name() even without CONFIG_TTY
audit: add tty field to LOGIN event
frv: declare jiffies to be located in the .data section
jiffies.h: declare jiffies and jiffies_64 with ____cacheline_aligned_in_smp
fs: compat: Remove warning from COMPATIBLE_IOCTL
selinux: Remove unnecessary check of array base in selinux_set_mapping()
cpumask: Add helper cpumask_available()
genirq: Use cpumask_available() for check of cpumask variable
netfilter: nf_nat_h323: fix logical-not-parentheses warning
Input: mousedev - fix implicit conversion warning
dm ioctl: remove double parentheses
PCI: Make PCI_ROM_ADDRESS_MASK a 32-bit constant
writeback: fix the wrong congested state variable definition
ACPI, PCI, irq: remove redundant check for null string pointer
kprobes/x86: Fix to set RWX bits correctly before releasing trampoline
usb: gadget: f_hid: fix: Prevent accessing released memory
usb: gadget: align buffer size when allocating for OUT endpoint
usb: gadget: fix usb_ep_align_maybe endianness and new usb_ep_align
usb: gadget: change len to size_t on alloc_ep_req()
usb: gadget: define free_ep_req as universal function
partitions/msdos: Unable to mount UFS 44bsd partitions
perf/hwbp: Simplify the perf-hwbp code, fix documentation
ALSA: pcm: potential uninitialized return values
ALSA: pcm: Use dma_bytes as size parameter in dma_mmap_coherent()
mtd: jedec_probe: Fix crash in jedec_read_mfr()
Replace #define with enum for better compilation errors.
Add missing include to drivers/tty/goldfish.c
Fix whitespace in drivers/tty/goldfish.c
ANDROID: fuse: Add null terminator to path in canonical path to avoid issue
ANDROID: sdcardfs: Fix sdcardfs to stop creating cases-sensitive duplicate entries.
ANDROID: add missing include to pdev_bus
ANDROID: pdev_bus: replace writel with gf_write_ptr
ANDROID: Cleanup type casting in goldfish.h
ANDROID: Include missing headers in goldfish.h
ANDROID: cpufreq: times: skip printing invalid frequencies
ANDROID: xt_qtaguid: Remove unnecessary null checks to device's name
ANDROID: xt_qtaguid: Remove unnecessary null checks to ifa_label
ANDROID: cpufreq: times: allocate enough space for a uid_entry
Linux 4.4.126
net: systemport: Rewrite __bcm_sysport_tx_reclaim()
net: fec: Fix unbalanced PM runtime calls
ieee802154: 6lowpan: fix possible NULL deref in lowpan_device_event()
s390/qeth: on channel error, reject further cmd requests
s390/qeth: lock read device while queueing next buffer
s390/qeth: when thread completes, wake up all waiters
s390/qeth: free netdevice when removing a card
team: Fix double free in error path
skbuff: Fix not waking applications when errors are enqueued
net: Only honor ifindex in IP_PKTINFO if non-0
netlink: avoid a double skb free in genlmsg_mcast()
net/iucv: Free memory obtained by kzalloc
net: ethernet: ti: cpsw: add check for in-band mode setting with RGMII PHY interface
net: ethernet: arc: Fix a potential memory leak if an optional regulator is deferred
l2tp: do not accept arbitrary sockets
ipv6: fix access to non-linear packet in ndisc_fill_redirect_hdr_option()
dccp: check sk for closed state in dccp_sendmsg()
net: Fix hlist corruptions in inet_evict_bucket()
Revert "genirq: Use irqd_get_trigger_type to compare the trigger type for shared IRQs"
scsi: sg: don't return bogus Sg_requests
Revert "genirq: Use irqd_get_trigger_type to compare the trigger type for shared IRQs"
UPSTREAM: drm: virtio-gpu: set atomic flag
UPSTREAM: drm: virtio-gpu: transfer dumb buffers to host on plane update
UPSTREAM: drm: virtio-gpu: ensure plane is flushed to host on atomic update
UPSTREAM: drm: virtio-gpu: get the fb from the plane state for atomic updates
Linux 4.4.125
bpf, x64: increase number of passes
bpf: skip unnecessary capability check
kbuild: disable clang's default use of -fmerge-all-constants
staging: lustre: ptlrpc: kfree used instead of kvfree
perf/x86/intel: Don't accidentally clear high bits in bdw_limit_period()
x86/entry/64: Don't use IST entry for #BP stack
x86/boot/64: Verify alignment of the LOAD segment
x86/build/64: Force the linker to use 2MB page size
kvm/x86: fix icebp instruction handling
tty: vt: fix up tabstops properly
can: cc770: Fix use after free in cc770_tx_interrupt()
can: cc770: Fix queue stall & dropped RTR reply
can: cc770: Fix stalls on rt-linux, remove redundant IRQ ack
staging: ncpfs: memory corruption in ncp_read_kernel()
mtd: nand: fsl_ifc: Fix nand waitfunc return value
tracing: probeevent: Fix to support minus offset from symbol
rtlwifi: rtl8723be: Fix loss of signal
brcmfmac: fix P2P_DEVICE ethernet address generation
acpi, numa: fix pxm to online numa node associations
drm: udl: Properly check framebuffer mmap offsets
drm/radeon: Don't turn off DP sink when disconnected
drm/vmwgfx: Fix a destoy-while-held mutex problem.
x86/mm: implement free pmd/pte page interfaces
mm/vmalloc: add interfaces to free unmapped page table
libata: Modify quirks for MX100 to limit NCQ_TRIM quirk to MU01 version
libata: Make Crucial BX100 500GB LPM quirk apply to all firmware versions
libata: Apply NOLPM quirk to Crucial M500 480 and 960GB SSDs
libata: Enable queued TRIM for Samsung SSD 860
libata: disable LPM for Crucial BX100 SSD 500GB drive
libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs
libata: remove WARN() for DMA or PIO command without data
libata: fix length validation of ATAPI-relayed SCSI commands
Bluetooth: btusb: Fix quirk for Atheros 1525/QCA6174
clk: bcm2835: Protect sections updating shared registers
ahci: Add PCI-id for the Highpoint Rocketraid 644L card
PCI: Add function 1 DMA alias quirk for Highpoint RocketRAID 644L
mmc: dw_mmc: fix falling from idmac to PIO mode when dw_mci_reset occurs
ALSA: hda/realtek - Always immediately update mute LED with pin VREF
ALSA: aloop: Fix access to not-yet-ready substream via cable
ALSA: aloop: Sync stale timer before release
ALSA: usb-audio: Fix parsing descriptor of UAC2 processing unit
iio: st_pressure: st_accel: pass correct platform data to init
MIPS: ralink: Remove ralink_halt()
ANDROID: cpufreq: times: fix proc_time_in_state_show
dtc: turn off dtc unit address warnings by default
Linux 4.4.124
RDMA/ucma: Fix access to non-initialized CM_ID object
dmaengine: ti-dma-crossbar: Fix event mapping for TPCC_EVT_MUX_60_63
clk: si5351: Rename internal plls to avoid name collisions
nfsd4: permit layoutget of executable-only files
RDMA/ocrdma: Fix permissions for OCRDMA_RESET_STATS
ip6_vti: adjust vti mtu according to mtu of lower device
iommu/vt-d: clean up pr_irq if request_threaded_irq fails
pinctrl: Really force states during suspend/resume
coresight: Fix disabling of CoreSight TPIU
pty: cancel pty slave port buf's work in tty_release
drm/omap: DMM: Check for DMM readiness after successful transaction commit
vgacon: Set VGA struct resource types
IB/umem: Fix use of npages/nmap fields
RDMA/cma: Use correct size when writing netlink stats
IB/ipoib: Avoid memory leak if the SA returns a different DGID
mmc: avoid removing non-removable hosts during suspend
platform/chrome: Use proper protocol transfer function
cros_ec: fix nul-termination for firmware build info
media: [RESEND] media: dvb-frontends: Add delay to Si2168 restart
media: bt8xx: Fix err 'bt878_probe()'
rtlwifi: rtl_pci: Fix the bug when inactiveps is enabled.
RDMA/iwpm: Fix uninitialized error code in iwpm_send_mapinfo()
drm/msm: fix leak in failed get_pages
media: c8sectpfe: fix potential NULL pointer dereference in c8sectpfe_timer_interrupt
Bluetooth: hci_qca: Avoid setup failure on missing rampatch
perf tests kmod-path: Don't fail if compressed modules aren't supported
rtc: ds1374: wdt: Fix stop/start ioctl always returning -EINVAL
rtc: ds1374: wdt: Fix issue with timeout scaling from secs to wdt ticks
cifs: small underflow in cnvrtDosUnixTm()
net: hns: fix ethtool_get_strings overflow in hns driver
sm501fb: don't return zero on failure path in sm501fb_start()
video: fbdev: udlfb: Fix buffer on stack
tcm_fileio: Prevent information leak for short reads
ia64: fix module loading for gcc-5.4
md/raid10: skip spare disk as 'first' disk
Input: twl4030-pwrbutton - use correct device for irq request
power: supply: pda_power: move from timer to delayed_work
bnx2x: Align RX buffers
drm/nouveau/kms: Increase max retries in scanout position queries.
ACPI / PMIC: xpower: Fix power_table addresses
ipmi/watchdog: fix wdog hang on panic waiting for ipmi response
ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP
mmc: sdhci-of-esdhc: limit SD clock for ls1012a/ls1046a
staging: wilc1000: fix unchecked return value
staging: unisys: visorhba: fix s-Par to boot with option CONFIG_VMAP_STACK set to y
mtip32xx: use runtime tag to initialize command header
mfd: palmas: Reset the POWERHOLD mux during power off
mac80211: don't parse encrypted management frames in ieee80211_frame_acked
Btrfs: send, fix file hole not being preserved due to inline extent
rndis_wlan: add return value validation
mt7601u: check return value of alloc_skb
iio: st_pressure: st_accel: Initialise sensor platform data properly
NFS: don't try to cross a mountpount when there isn't one there.
infiniband/uverbs: Fix integer overflows
scsi: mac_esp: Replace bogus memory barrier with spinlock
qlcnic: fix unchecked return value
wan: pc300too: abort path on failure
mmc: host: omap_hsmmc: checking for NULL instead of IS_ERR()
openvswitch: Delete conntrack entry clashing with an expectation.
netfilter: xt_CT: fix refcnt leak on error path
Fix driver usage of 128B WQEs when WQ_CREATE is V1.
ASoC: Intel: Skylake: Uninitialized variable in probe_codec()
IB/mlx4: Change vma from shared to private
IB/mlx4: Take write semaphore when changing the vma struct
HSI: ssi_protocol: double free in ssip_pn_xmit()
IB/ipoib: Update broadcast object if PKey value was changed in index 0
IB/ipoib: Fix deadlock between ipoib_stop and mcast join flow
ALSA: hda - Fix headset microphone detection for ASUS N551 and N751
e1000e: fix timing for 82579 Gigabit Ethernet controller
tcp: remove poll() flakes with FastOpen
NFS: Fix missing pg_cleanup after nfs_pageio_cond_complete()
md/raid10: wait up frozen array in handle_write_completed
iommu/omap: Register driver before setting IOMMU ops
ARM: 8668/1: ftrace: Fix dynamic ftrace with DEBUG_RODATA and !FRAME_POINTER
KVM: PPC: Book3S PR: Exit KVM on failed mapping
scsi: virtio_scsi: Always try to read VPD pages
clk: ns2: Correct SDIO bits
ath: Fix updating radar flags for coutry code India
spi: dw: Disable clock after unregistering the host
media/dvb-core: Race condition when writing to CAM
net: ipv6: send unsolicited NA on admin up
i2c: i2c-scmi: add a MS HID
genirq: Use irqd_get_trigger_type to compare the trigger type for shared IRQs
cpufreq/sh: Replace racy task affinity logic
ACPI/processor: Replace racy task affinity logic
ACPI/processor: Fix error handling in __acpi_processor_start()
time: Change posix clocks ops interfaces to use timespec64
Input: ar1021_i2c - fix too long name in driver's device table
rtc: cmos: Do not assume irq 8 for rtc when there are no legacy irqs
x86: i8259: export legacy_pic symbol
regulator: anatop: set default voltage selector for pcie
platform/x86: asus-nb-wmi: Add wapf4 quirk for the X302UA
staging: android: ashmem: Fix possible deadlock in ashmem_ioctl
CIFS: Enable encryption during session setup phase
SMB3: Validate negotiate request must always be signed
tpm_tis: fix potential buffer overruns caused by bit glitches on the bus
tpm: fix potential buffer overruns caused by bit glitches on the bus
BACKPORT, FROMLIST: crypto: arm64/speck - add NEON-accelerated implementation of Speck-XTS
Linux 4.4.123
bpf: fix incorrect sign extension in check_alu_op()
usb: gadget: bdc: 64-bit pointer capability check
USB: gadget: udc: Add missing platform_device_put() on error in bdc_pci_probe()
btrfs: Fix use-after-free when cleaning up fs_devs with a single stale device
btrfs: alloc_chunk: fix DUP stripe size handling
ARM: dts: LogicPD Torpedo: Fix I2C1 pinmux
scsi: sg: only check for dxfer_len greater than 256M
scsi: sg: fix static checker warning in sg_is_valid_dxfer
scsi: sg: fix SG_DXFER_FROM_DEV transfers
irqchip/gic-v3-its: Ensure nr_ites >= nr_lpis
fs/aio: Use RCU accessors for kioctx_table->table[]
fs/aio: Add explicit RCU grace period when freeing kioctx
lock_parent() needs to recheck if dentry got __dentry_kill'ed under it
fs: Teach path_connected to handle nfs filesystems with multiple roots.
drm/amdgpu/dce: Don't turn off DP sink when disconnected
ALSA: seq: Clear client entry before deleting else at closing
ALSA: seq: Fix possible UAF in snd_seq_check_queue()
ALSA: hda - Revert power_save option default value
ALSA: pcm: Fix UAF in snd_pcm_oss_get_formats()
x86/mm: Fix vmalloc_fault to use pXd_large
x86/vm86/32: Fix POPF emulation
selftests/x86/entry_from_vm86: Add test cases for POPF
selftests/x86: Add tests for the STR and SLDT instructions
selftests/x86: Add tests for User-Mode Instruction Prevention
selftests/x86/entry_from_vm86: Exit with 1 if we fail
ima: relax requiring a file signature for new files with zero length
rcutorture/configinit: Fix build directory error message
ipvlan: add L2 check for packets arriving via virtual devices
ASoC: nuc900: Fix a loop timeout test
mac80211: remove BUG() when interface type is invalid
mac80211_hwsim: enforce PS_MANUAL_POLL to be set after PS_ENABLED
agp/intel: Flush all chipset writes after updating the GGTT
drm/amdkfd: Fix memory leaks in kfd topology
veth: set peer GSO values
media: cpia2: Fix a couple off by one bugs
scsi: dh: add new rdac devices
scsi: devinfo: apply to HP XP the same flags as Hitachi VSP
scsi: core: scsi_get_device_flags_keyed(): Always return device flags
spi: sun6i: disable/unprepare clocks on remove
tools/usbip: fixes build with musl libc toolchain
ath10k: fix invalid STS_CAP_OFFSET_MASK
clk: qcom: msm8916: fix mnd_width for codec_digcodec
cpufreq: Fix governor module removal race
ath10k: update tdls teardown state to target
ARM: dts: omap3-n900: Fix the audio CODEC's reset pin
ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin
mtd: nand: fix interpretation of NAND_CMD_NONE in nand_command[_lp]()
net: xfrm: allow clearing socket xfrm policies.
test_firmware: fix setting old custom fw path back on exit
sched: Stop resched_cpu() from sending IPIs to offline CPUs
sched: Stop switched_to_rt() from sending IPIs to offline CPUs
ARM: dts: exynos: Correct Trats2 panel reset line
HID: elo: clear BTN_LEFT mapping
video/hdmi: Allow "empty" HDMI infoframes
drm/edid: set ELD connector type in drm_edid_to_eld()
wil6210: fix memory access violation in wil_memcpy_from/toio_32
pwm: tegra: Increase precision in PWM rate calculation
kprobes/x86: Set kprobes pages read-only
kprobes/x86: Fix kprobe-booster not to boost far call instructions
scsi: sg: close race condition in sg_remove_sfp_usercontext()
scsi: sg: check for valid direction before starting the request
perf session: Don't rely on evlist in pipe mode
perf inject: Copy events when reordering events in pipe mode
drivers/perf: arm_pmu: handle no platform_device
usb: gadget: dummy_hcd: Fix wrong power status bit clear/reset in dummy_hub_control()
usb: dwc2: Make sure we disconnect the gadget state
md/raid6: Fix anomily when recovering a single device in RAID6.
regulator: isl9305: fix array size
MIPS: r2-on-r6-emu: Clear BLTZALL and BGEZALL debugfs counters
MIPS: r2-on-r6-emu: Fix BLEZL and BGTZL identification
MIPS: BPF: Fix multiple problems in JIT skb access helpers.
MIPS: BPF: Quit clobbering callee saved registers in JIT code.
coresight: Fixes coresight DT parse to get correct output port ID.
drm/amdgpu: Fail fb creation from imported dma-bufs. (v2)
drm/radeon: Fail fb creation from imported dma-bufs.
video: ARM CLCD: fix dma allocation size
iommu/iova: Fix underflow bug in __alloc_and_insert_iova_range
apparmor: Make path_max parameter readonly
scsi: ses: don't get power status of SES device slot on probe
fm10k: correctly check if interface is removed
ALSA: firewire-digi00x: handle all MIDI messages on streaming packets
reiserfs: Make cancel_old_flush() reliable
ARM: dts: koelsch: Correct clock frequency of X2 DU clock input
net/faraday: Add missing include of of.h
powerpc: Avoid taking a data miss on every userspace instruction miss
ARM: dts: r8a7791: Correct parent of SSI[0-9] clocks
ARM: dts: r8a7790: Correct parent of SSI[0-9] clocks
NFC: nfcmrvl: double free on error path
NFC: nfcmrvl: Include unaligned.h instead of access_ok.h
vxlan: vxlan dev should inherit lowerdev's gso_max_size
drm/vmwgfx: Fixes to vmwgfx_fb
braille-console: Fix value returned by _braille_console_setup
bonding: refine bond_fold_stats() wrap detection
f2fs: relax node version check for victim data in gc
blk-throttle: make sure expire time isn't too big
mm: Fix false-positive VM_BUG_ON() in page_cache_{get,add}_speculative()
driver: (adm1275) set the m,b and R coefficients correctly for power
dmaengine: imx-sdma: add 1ms delay to ensure SDMA channel is stopped
tcp: sysctl: Fix a race to avoid unexpected 0 window from space
spi: omap2-mcspi: poll OMAP2_MCSPI_CHSTAT_RXS for PIO transfer
ASoC: rcar: ssi: don't set SSICR.CKDV = 000 with SSIWSR.CONT
sched: act_csum: don't mangle TCP and UDP GSO packets
Input: qt1070 - add OF device ID table
sysrq: Reset the watchdog timers while displaying high-resolution timers
timers, sched_clock: Update timeout for clock wrap
media: i2c/soc_camera: fix ov6650 sensor getting wrong clock
scsi: ipr: Fix missed EH wakeup
solo6x10: release vb2 buffers in solo_stop_streaming()
of: fix of_device_get_modalias returned length when truncating buffers
batman-adv: handle race condition for claims between gateways
ARM: dts: Adjust moxart IRQ controller and flags
net/8021q: create device with all possible features in wanted_features
HID: clamp input to logical range if no null state
perf probe: Return errno when not hitting any event
ath10k: disallow DFS simulation if DFS channel is not enabled
drm: Defer disabling the vblank IRQ until the next interrupt (for instant-off)
drivers: net: xgene: Fix hardware checksum setting
perf tools: Make perf_event__synthesize_mmap_events() scale
i40e: fix ethtool to get EEPROM data from X722 interface
i40e: Acquire NVM lock before reads on all devices
perf sort: Fix segfault with basic block 'cycles' sort dimension
selinux: check for address length in selinux_socket_bind()
PCI/MSI: Stop disabling MSI/MSI-X in pci_device_shutdown()
ath10k: fix a warning during channel switch with multiple vaps
drm: qxl: Don't alloc fbdev if emulation is not supported
HID: reject input outside logical range only if null state is set
staging: wilc1000: add check for kmalloc allocation failure.
staging: speakup: Replace BUG_ON() with WARN_ON().
Input: tsc2007 - check for presence and power down tsc2007 during probe
blkcg: fix double free of new_blkg in blkcg_init_queue
ANDROID: cpufreq: times: avoid prematurely freeing uid_entry
ANDROID: Use standard logging functions in goldfish_pipe
ANDROID: Fix whitespace in goldfish
staging: android: ashmem: Fix possible deadlock in ashmem_ioctl
llist: clang: introduce member_address_is_nonnull()
Linux 4.4.122
fixup: sctp: verify size of a new chunk in _sctp_make_chunk()
serial: 8250_pci: Add Brainboxes UC-260 4 port serial device
usb: gadget: f_fs: Fix use-after-free in ffs_fs_kill_sb()
usb: usbmon: Read text within supplied buffer size
USB: usbmon: remove assignment from IS_ERR argument
usb: quirks: add control message delay for 1b1c:1b20
USB: storage: Add JMicron bridge 152d:2567 to unusual_devs.h
staging: android: ashmem: Fix lockdep issue during llseek
staging: comedi: fix comedi_nsamples_left.
uas: fix comparison for error code
tty/serial: atmel: add new version check for usart
serial: sh-sci: prevent lockup on full TTY buffers
x86: Treat R_X86_64_PLT32 as R_X86_64_PC32
x86/module: Detect and skip invalid relocations
Revert "ARM: dts: LogicPD Torpedo: Fix I2C1 pinmux"
NFS: Fix an incorrect type in struct nfs_direct_req
scsi: qla2xxx: Replace fcport alloc with qla2x00_alloc_fcport
ubi: Fix race condition between ubi volume creation and udev
ext4: inplace xattr block update fails to deduplicate blocks
netfilter: x_tables: pack percpu counter allocations
netfilter: x_tables: pass xt_counters struct to counter allocator
netfilter: x_tables: pass xt_counters struct instead of packet counter
netfilter: use skb_to_full_sk in ip_route_me_harder
netfilter: ipv6: fix use-after-free Write in nf_nat_ipv6_manip_pkt
netfilter: bridge: ebt_among: add missing match size checks
netfilter: ebtables: CONFIG_COMPAT: don't trust userland offsets
netfilter: IDLETIMER: be syzkaller friendly
netfilter: nat: cope with negative port range
netfilter: x_tables: fix missing timer initialization in xt_LED
netfilter: add back stackpointer size checks
tc358743: fix register i2c_rd/wr function fix
Input: tca8418_keypad - remove double read of key event register
ARM: omap2: hide omap3_save_secure_ram on non-OMAP3 builds
netfilter: nfnetlink_queue: fix timestamp attribute
watchdog: hpwdt: fix unused variable warning
watchdog: hpwdt: Check source of NMI
watchdog: hpwdt: SMBIOS check
nospec: Include <asm/barrier.h> dependency
ALSA: hda: add dock and led support for HP ProBook 640 G2
ALSA: hda: add dock and led support for HP EliteBook 820 G3
ALSA: seq: More protection for concurrent write and ioctl races
ALSA: seq: Don't allow resizing pool in use
ALSA: hda/realtek - Fix dock line-out volume on Dell Precision 7520
x86/MCE: Serialize sysfs changes
bcache: don't attach backing with duplicate UUID
kbuild: Handle builtin dtb file names containing hyphens
loop: Fix lost writes caused by missing flag
Input: matrix_keypad - fix race when disabling interrupts
MIPS: OCTEON: irq: Check for null return on kzalloc allocation
MIPS: ath25: Check for kzalloc allocation failure
MIPS: BMIPS: Do not mask IPIs during suspend
drm/amdgpu: fix KV harvesting
drm/radeon: fix KV harvesting
drm/amdgpu: Notify sbios device ready before send request
drm/amdgpu: Fix deadlock on runtime suspend
drm/radeon: Fix deadlock on runtime suspend
drm/nouveau: Fix deadlock on runtime suspend
drm: Allow determining if current task is output poll worker
workqueue: Allow retrieval of current task's work struct
scsi: qla2xxx: Fix NULL pointer crash due to active timer for ABTS
RDMA/mlx5: Fix integer overflow while resizing CQ
RDMA/ucma: Check that user doesn't overflow QP state
RDMA/ucma: Limit possible option size
ANDROID: ranchu: 32 bit framebuffer support
ANDROID: Address checkpatch warnings in goldfishfb
ANDROID: Address checkpatch.pl warnings in goldfish_pipe
ANDROID: sdcardfs: fix lock issue on 32 bit/SMP architectures
ANDROID: goldfish: Fix typo in goldfish_cmd_locked() call
ANDROID: Address checkpatch.pl warnings in goldfish_pipe_v2
FROMLIST: f2fs: don't put dentry page in pagecache into highmem
Linux 4.4.121
btrfs: preserve i_mode if __btrfs_set_acl() fails
bpf, x64: implement retpoline for tail call
dm io: fix duplicate bio completion due to missing ref count
mpls, nospec: Sanitize array index in mpls_label_ok()
net: mpls: Pull common label check into helper
sctp: verify size of a new chunk in _sctp_make_chunk()
s390/qeth: fix IPA command submission race
s390/qeth: fix SETIP command handling
sctp: fix dst refcnt leak in sctp_v6_get_dst()
sctp: fix dst refcnt leak in sctp_v4_get_dst
udplite: fix partial checksum initialization
ppp: prevent unregistered channels from connecting to PPP units
netlink: ensure to loop over all netns in genlmsg_multicast_allns()
net: ipv4: don't allow setting net.ipv4.route.min_pmtu below 68
net: fix race on decreasing number of TX queues
ipv6 sit: work around bogus gcc-8 -Wrestrict warning
hdlc_ppp: carrier detect ok, don't turn off negotiation
fib_semantics: Don't match route with mismatching tclassid
bridge: check brport attr show in brport_show
Revert "led: core: Fix brightness setting when setting delay_off=0"
x86/spectre: Fix an error message
leds: do not overflow sysfs buffer in led_trigger_show
x86/apic/vector: Handle legacy irq data correctly
ARM: dts: LogicPD Torpedo: Fix I2C1 pinmux
btrfs: Don't clear SGID when inheriting ACLs
x86/syscall: Sanitize syscall table de-references under speculation fix
KVM: mmu: Fix overlap between public and private memslots
ARM: mvebu: Fix broken PL310_ERRATA_753970 selects
nospec: Allow index argument to have const-qualified type
media: m88ds3103: don't call a non-initalized function
cpufreq: s3c24xx: Fix broken s3c_cpufreq_init()
ALSA: hda: Add a power_save blacklist
ALSA: usb-audio: Add a quirck for B&W PX headphones
tpm_i2c_nuvoton: fix potential buffer overruns caused by bit glitches on the bus
tpm_i2c_infineon: fix potential buffer overruns caused by bit glitches on the bus
tpm: st33zp24: fix potential buffer overruns caused by bit glitches on the bus
ANDROID: Delete the goldfish_nand driver.
ANDROID: Add input support for Android Wear.
ANDROID: proc: fix config & includes for /proc/uid
FROMLIST: ARM: amba: Don't read past the end of sysfs "driver_override" buffer
UPSTREAM: ANDROID: binder: remove WARN() for redundant txn error
ANDROID: cpufreq: times: Add missing includes
ANDROID: cpufreq: Add time_in_state to /proc/uid directories
ANDROID: proc: Add /proc/uid directory
ANDROID: cpufreq: times: track per-uid time in state
ANDROID: cpufreq: track per-task time in state
Conflicts:
drivers/gpu/drm/msm/msm_gem.c
drivers/net/wireless/ath/regd.c
kernel/sched/core.c
Change-Id: I9bb7b5a062415da6925a5a56a34e6eb066a53320
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
* refs/heads/tmp-29d0b65
Linux 4.4.88
xfs: XFS_IS_REALTIME_INODE() should be false if no rt device present
NFS: Fix 2 use after free issues in the I/O code
ARM: 8692/1: mm: abort uaccess retries upon fatal signal
Bluetooth: Properly check L2CAP config option output buffer length
ALSA: msnd: Optimize / harden DSP and MIDI loops
locktorture: Fix potential memory leak with rw lock test
btrfs: resume qgroup rescan on rw remount
drm/bridge: adv7511: Re-write the i2c address before EDID probing
drm/bridge: adv7511: Switch to using drm_kms_helper_hotplug_event()
drm/bridge: adv7511: Use work_struct to defer hotplug handing to out of irq context
drm/bridge: adv7511: Fix mutex deadlock when interrupts are disabled
drm: adv7511: really enable interrupts for EDID detection
scsi: sg: recheck MMAP_IO request length with lock held
scsi: sg: protect against races between mmap() and SG_SET_RESERVED_SIZE
cs5536: add support for IDE controller variant
workqueue: Fix flag collision
drm/nouveau/pci/msi: disable MSI on big-endian platforms by default
mwifiex: correct channel stat buffer overflows
dlm: avoid double-free on error path in dlm_device_{register,unregister}
Bluetooth: Add support of 13d3:3494 RTL8723BE device
rtlwifi: rtl_pci_probe: Fix fail path of _rtl_pci_find_adapter
Input: trackpoint - assume 3 buttons when buttons detection fails
ath10k: fix memory leak in rx ring buffer allocation
intel_th: pci: Add Cannon Lake PCH-LP support
intel_th: pci: Add Cannon Lake PCH-H support
driver core: bus: Fix a potential double free
staging/rts5208: fix incorrect shift to extract upper nybble
USB: core: Avoid race of async_completed() w/ usbdev_release()
usb:xhci:Fix regression when ATI chipsets detected
usb: Add device quirk for Logitech HD Pro Webcam C920-C
USB: serial: option: add support for D-Link DWM-157 C1
usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard
ANDROID: sdcardfs: Add missing break
ANDROID: Sdcardfs: Move gid derivation under flag
ANDROID: mnt: Fix freeing of mount data
drivers: cpufreq: checks to avoid kernel crash in cpufreq_interactive
ANDROID: Use sk_uid to replace uid get from socket file
ANDROID: nf: xt_qtaguid: fix handling for cases where tunnels are used.
Revert "ANDROID: Use sk_uid to replace uid get from socket file"
ANDROID: fiq_debugger: Fix minor bug in code
Conflicts:
drivers/cpufreq/cpufreq_interactive.c
drivers/net/wireless/ath/ath10k/core.c
drivers/staging/android/fiq_debugger/fiq_debugger.c
net/netfilter/xt_qtaguid.c
Change-Id: I49c67ff84d4bee0799691cc1ee0a023e2dd13e66
Signed-off-by: Blagovest Kolenichev <bkolenichev@codeaurora.org>
commit fbf1c41fc0f4d3574ac2377245efd666c1fa3075 upstream.
Commit 0a94efb5acbb ("workqueue: implicit ordered attribute should be
overridable") introduced a __WQ_ORDERED_EXPLICIT flag but gave it the
same value as __WQ_LEGACY. I don't believe these were intended to
mean the same thing, so renumber __WQ_ORDERED_EXPLICIT.
Fixes: 0a94efb5acbb ("workqueue: implicit ordered attribute should be ...")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* refs/heads/tmp-4b8fc9f
UPSTREAM: locking: avoid passing around 'thread_info' in mutex debugging code
ANDROID: arm64: fix undeclared 'init_thread_info' error
UPSTREAM: kdb: use task_cpu() instead of task_thread_info()->cpu
Linux 4.4.82
net: account for current skb length when deciding about UFO
ipv4: Should use consistent conditional judgement for ip fragment in __ip_append_data and ip_finish_output
mm/mempool: avoid KASAN marking mempool poison checks as use-after-free
KVM: arm/arm64: Handle hva aging while destroying the vm
sparc64: Prevent perf from running during super critical sections
udp: consistently apply ufo or fragmentation
revert "ipv4: Should use consistent conditional judgement for ip fragment in __ip_append_data and ip_finish_output"
revert "net: account for current skb length when deciding about UFO"
packet: fix tp_reserve race in packet_set_ring
net: avoid skb_warn_bad_offload false positives on UFO
tcp: fastopen: tcp_connect() must refresh the route
net: sched: set xt_tgchk_param par.nft_compat as 0 in ipt_init_target
bpf, s390: fix jit branch offset related to ldimm64
net: fix keepalive code vs TCP_FASTOPEN_CONNECT
tcp: avoid setting cwnd to invalid ssthresh after cwnd reduction states
ANDROID: keychord: Fix for a memory leak in keychord.
ANDROID: keychord: Fix races in keychord_write.
Use %zu to print resid (size_t).
ANDROID: keychord: Fix a slab out-of-bounds read.
Linux 4.4.81
workqueue: implicit ordered attribute should be overridable
net: account for current skb length when deciding about UFO
ipv4: Should use consistent conditional judgement for ip fragment in __ip_append_data and ip_finish_output
mm: don't dereference struct page fields of invalid pages
signal: protect SIGNAL_UNKILLABLE from unintentional clearing.
lib/Kconfig.debug: fix frv build failure
mm, slab: make sure that KMALLOC_MAX_SIZE will fit into MAX_ORDER
ARM: 8632/1: ftrace: fix syscall name matching
virtio_blk: fix panic in initialization error path
drm/virtio: fix framebuffer sparse warning
scsi: qla2xxx: Get mutex lock before checking optrom_state
phy state machine: failsafe leave invalid RUNNING state
x86/boot: Add missing declaration of string functions
tg3: Fix race condition in tg3_get_stats64().
net: phy: dp83867: fix irq generation
sh_eth: R8A7740 supports packet shecksumming
wext: handle NULL extra data in iwe_stream_add_point better
sparc64: Measure receiver forward progress to avoid send mondo timeout
xen-netback: correctly schedule rate-limited queues
net: phy: Fix PHY unbind crash
net: phy: Correctly process PHY_HALTED in phy_stop_machine()
net/mlx5: Fix command bad flow on command entry allocation failure
sctp: fix the check for _sctp_walk_params and _sctp_walk_errors
sctp: don't dereference ptr before leaving _sctp_walk_{params, errors}()
dccp: fix a memleak for dccp_feat_init err process
dccp: fix a memleak that dccp_ipv4 doesn't put reqsk properly
dccp: fix a memleak that dccp_ipv6 doesn't put reqsk properly
net: ethernet: nb8800: Handle all 4 RGMII modes identically
ipv6: Don't increase IPSTATS_MIB_FRAGFAILS twice in ip6_fragment()
packet: fix use-after-free in prb_retire_rx_blk_timer_expired()
openvswitch: fix potential out of bound access in parse_ct
mcs7780: Fix initialization when CONFIG_VMAP_STACK is enabled
rtnetlink: allocate more memory for dev_set_mac_address()
ipv4: initialize fib_trie prior to register_netdev_notifier call.
ipv6: avoid overflow of offset in ip6_find_1stfragopt
net: Zero terminate ifr_name in dev_ifname().
ipv4: ipv6: initialize treq->txhash in cookie_v[46]_check()
saa7164: fix double fetch PCIe access condition
drm: rcar-du: fix backport bug
f2fs: sanity check checkpoint segno and blkoff
media: lirc: LIRC_GET_REC_RESOLUTION should return microseconds
mm, mprotect: flush TLB if potentially racing with a parallel reclaim leaving stale TLB entries
iser-target: Avoid isert_conn->cm_id dereference in isert_login_recv_done
iscsi-target: Fix delayed logout processing greater than SECONDS_FOR_LOGOUT_COMP
iscsi-target: Fix initial login PDU asynchronous socket close OOPs
iscsi-target: Fix early sk_data_ready LOGIN_FLAGS_READY race
iscsi-target: Always wait for kthread_should_stop() before kthread exit
target: Avoid mappedlun symlink creation during lun shutdown
media: platform: davinci: return -EINVAL for VPFE_CMD_S_CCDC_RAW_PARAMS ioctl
ARM: dts: armada-38x: Fix irq type for pca955
ext4: fix overflow caused by missing cast in ext4_resize_fs()
ext4: fix SEEK_HOLE/SEEK_DATA for blocksize < pagesize
mm/page_alloc: Remove kernel address exposure in free_reserved_area()
KVM: async_pf: make rcu irq exit if not triggered from idle task
ASoC: do not close shared backend dailink
ALSA: hda - Fix speaker output from VAIO VPCL14M1R
workqueue: restore WQ_UNBOUND/max_active==1 to be ordered
libata: array underflow in ata_find_dev()
ANDROID: binder: don't queue async transactions to thread.
ANDROID: binder: don't enqueue death notifications to thread todo.
ANDROID: binder: call poll_wait() unconditionally.
android: configs: move quota-related configs to recommended
BACKPORT: arm64: split thread_info from task stack
UPSTREAM: arm64: assembler: introduce ldr_this_cpu
UPSTREAM: arm64: make cpu number a percpu variable
UPSTREAM: arm64: smp: prepare for smp_processor_id() rework
BACKPORT: arm64: move sp_el0 and tpidr_el1 into cpu_suspend_ctx
UPSTREAM: arm64: prep stack walkers for THREAD_INFO_IN_TASK
UPSTREAM: arm64: unexport walk_stackframe
UPSTREAM: arm64: traps: simplify die() and __die()
UPSTREAM: arm64: factor out current_stack_pointer
BACKPORT: arm64: asm-offsets: remove unused definitions
UPSTREAM: arm64: thread_info remove stale items
UPSTREAM: thread_info: include <current.h> for THREAD_INFO_IN_TASK
UPSTREAM: thread_info: factor out restart_block
UPSTREAM: kthread: Pin the stack via try_get_task_stack()/put_task_stack() in to_live_kthread() function
UPSTREAM: sched/core: Add try_get_task_stack() and put_task_stack()
UPSTREAM: sched/core: Allow putting thread_info into task_struct
UPSTREAM: printk: when dumping regs, show the stack, not thread_info
UPSTREAM: fix up initial thread stack pointer vs thread_info confusion
UPSTREAM: Clarify naming of thread info/stack allocators
ANDROID: sdcardfs: override credential for ioctl to lower fs
Conflicts:
android/configs/android-base.cfg
arch/arm64/Kconfig
arch/arm64/include/asm/suspend.h
arch/arm64/kernel/head.S
arch/arm64/kernel/smp.c
arch/arm64/kernel/suspend.c
arch/arm64/kernel/traps.c
arch/arm64/mm/proc.S
kernel/fork.c
sound/soc/soc-pcm.c
Change-Id: I273e216c94899a838bbd208391c6cbe20b2bf683
Signed-off-by: Blagovest Kolenichev <bkolenichev@codeaurora.org>
commit 0a94efb5acbb6980d7c9ab604372d93cd507e4d8 upstream.
5c0338c68706 ("workqueue: restore WQ_UNBOUND/max_active==1 to be
ordered") automatically enabled ordered attribute for unbound
workqueues w/ max_active == 1. Because ordered workqueues reject
max_active and some attribute changes, this implicit ordered mode
broke cases where the user creates an unbound workqueue w/ max_active
== 1 and later explicitly changes the related attributes.
This patch distinguishes explicit and implicit ordered setting and
overrides from attribute changes if implict.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 5c0338c68706 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
Cc: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Workqueue stalls can happen from a variety of usage bugs such as
missing WQ_MEM_RECLAIM flag or concurrency managed work item
indefinitely staying RUNNING. These stalls can be extremely difficult
to hunt down because the usual warning mechanisms can't detect
workqueue stalls and the internal state is pretty opaque.
To alleviate the situation, this patch implements workqueue lockup
detector. It periodically monitors all worker_pools periodically and,
if any pool failed to make forward progress longer than the threshold
duration, triggers warning and dumps workqueue state as follows.
BUG: workqueue lockup - pool cpus=0 node=0 flags=0x0 nice=0 stuck for 31s!
Showing busy workqueues and worker pools:
workqueue events: flags=0x0
pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=17/256
pending: monkey_wrench_fn, e1000_watchdog, cache_reap, vmstat_shepherd, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, cgroup_release_agent
workqueue events_power_efficient: flags=0x80
pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=2/256
pending: check_lifetime, neigh_periodic_work
workqueue cgroup_pidlist_destroy: flags=0x0
pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/1
pending: cgroup_pidlist_destroy_work_fn
...
The detection mechanism is controller through kernel parameter
workqueue.watchdog_thresh and can be updated at runtime through the
sysfs module parameter file.
v2: Decoupled from softlockup control knobs.
CRs-Fixed: 1007459
Change-Id: Id7dfbbd2701128a942b1bcac2299e07a66db8657
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Don Zickus <dzickus@redhat.com>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Chris Mason <clm@fb.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Git-commit: 82607adcf9cdf40fb7b5331269780c8f70ec6e35
Git-repo: git://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git
Signed-off-by: Trilok Soni <tsoni@codeaurora.org>
There are some errors in the docbook comments in workqueue.h that cause
warnings when the docs are built; this only recently came to light because
these comments were not used until now. Fix the comments to make the
warnings go away.
The "args..." "fix" is a hack. kerneldoc doesn't deal properly with named
variadic arguments in macros, so all I've really achieved here is to make
it shut up. Fixing kerneldoc will have to wait for more time.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Tejun Heo <tj@kernel.org>
flush_scheduled_work() is just a simple call to flush_work().
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Allow to modify the low-level unbound workqueues cpumask through
sysfs. This is performed by traversing the entire workqueue list
and calling apply_wqattrs_prepare() on the unbound workqueues
with the new low level mask. Only after all the preparation are done,
we commit them all together.
Ordered workqueues are ignored from the low level unbound workqueue
cpumask, it will be handled in near future.
All the (default & per-node) pwqs are mandatorily controlled by
the low level cpumask. If the user configured cpumask doesn't overlap
with the low level cpumask, the low level cpumask will be used for the
wq instead.
The comment of wq_calc_node_cpumask() is updated and explicitly
requires that its first argument should be the attrs of the default
pwq.
The default wq_unbound_cpumask is cpu_possible_mask. The workqueue
subsystem doesn't know its best default value, let the system manager
or the other subsystem set it when needed.
Changed from V8:
merge the calculating code for the attrs of the default pwq together.
minor change the code&comments for saving the user configured attrs.
remove unnecessary list_del().
minor update the comment of wq_calc_node_cpumask().
update the comment of workqueue_set_unbound_cpumask();
Cc: Christoph Lameter <cl@linux.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Mike Galbraith <bitbucket@online.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Workqueues are used extensively throughout the kernel but sometimes
it's difficult to debug stalls involving work items because visibility
into its inner workings is fairly limited. Although sysrq-t task dump
annotates each active worker task with the information on the work
item being executed, it is challenging to find out which work items
are pending or delayed on which queues and how pools are being
managed.
This patch implements show_workqueue_state() which dumps all busy
workqueues and pools and is called from the sysrq-t handler. At the
end of sysrq-t dump, something like the following is printed.
Showing busy workqueues and worker pools:
...
workqueue filler_wq: flags=0x0
pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=2/256
in-flight: 491:filler_workfn, 507:filler_workfn
pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=2/256
in-flight: 501:filler_workfn
pending: filler_workfn
...
workqueue test_wq: flags=0x8
pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=1/1
in-flight: 510(RESCUER):test_workfn BAR(69) BAR(500)
delayed: test_workfn1 BAR(492), test_workfn2
...
pool 0: cpus=0 node=0 flags=0x0 nice=0 workers=2 manager: 137
pool 2: cpus=1 node=0 flags=0x0 nice=0 workers=3 manager: 469
pool 3: cpus=1 node=0 flags=0x0 nice=-20 workers=2 idle: 16
pool 8: cpus=0-3 flags=0x4 nice=0 workers=2 manager: 62
The above shows that test_wq is executing test_workfn() on pid 510
which is the rescuer and also that there are two tasks 69 and 500
waiting for the work item to finish in flush_work(). As test_wq has
max_active of 1, there are two work items for test_workfn1() and
test_workfn2() which are delayed till the current work item is
finished. In addition, pid 492 is flushing test_workfn1().
The work item for test_workfn() is being executed on pwq of pool 2
which is the normal priority per-cpu pool for CPU 1. The pool has
three workers, two of which are executing filler_workfn() for
filler_wq and the last one is assuming the manager role trying to
create more workers.
This extra workqueue state dump will hopefully help chasing down hangs
involving workqueues.
v3: cpulist_pr_cont() replaced with "%*pbl" printf formatting.
v2: As suggested by Andrew, minor formatting change in pr_cont_work(),
printk()'s replaced with pr_info()'s, and cpumask printing now
uses cpulist_pr_cont().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
CC: Ingo Molnar <mingo@redhat.com>
cancel[_delayed]_work_sync() are implemented using
__cancel_work_timer() which grabs the PENDING bit using
try_to_grab_pending() and then flushes the work item with PENDING set
to prevent the on-going execution of the work item from requeueing
itself.
try_to_grab_pending() can always grab PENDING bit without blocking
except when someone else is doing the above flushing during
cancelation. In that case, try_to_grab_pending() returns -ENOENT. In
this case, __cancel_work_timer() currently invokes flush_work(). The
assumption is that the completion of the work item is what the other
canceling task would be waiting for too and thus waiting for the same
condition and retrying should allow forward progress without excessive
busy looping
Unfortunately, this doesn't work if preemption is disabled or the
latter task has real time priority. Let's say task A just got woken
up from flush_work() by the completion of the target work item. If,
before task A starts executing, task B gets scheduled and invokes
__cancel_work_timer() on the same work item, its try_to_grab_pending()
will return -ENOENT as the work item is still being canceled by task A
and flush_work() will also immediately return false as the work item
is no longer executing. This puts task B in a busy loop possibly
preventing task A from executing and clearing the canceling state on
the work item leading to a hang.
task A task B worker
executing work
__cancel_work_timer()
try_to_grab_pending()
set work CANCELING
flush_work()
block for work completion
completion, wakes up A
__cancel_work_timer()
while (forever) {
try_to_grab_pending()
-ENOENT as work is being canceled
flush_work()
false as work is no longer executing
}
This patch removes the possible hang by updating __cancel_work_timer()
to explicitly wait for clearing of CANCELING rather than invoking
flush_work() after try_to_grab_pending() fails with -ENOENT.
Link: http://lkml.kernel.org/g/20150206171156.GA8942@axis.com
v3: bit_waitqueue() can't be used for work items defined in vmalloc
area. Switched to custom wake function which matches the target
work item and exclusive wait and wakeup.
v2: v1 used wake_up() on bit_waitqueue() which leads to NULL deref if
the target bit waitqueue has wait_bit_queue's on it. Use
DEFINE_WAIT_BIT() and __wake_up_bit() instead. Reported by Tomeu
Vizoso.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Rabin Vincent <rabin.vincent@axis.com>
Cc: Tomeu Vizoso <tomeu.vizoso@gmail.com>
Cc: stable@vger.kernel.org
Tested-by: Jesper Nilsson <jesper.nilsson@axis.com>
Tested-by: Rabin Vincent <rabin.vincent@axis.com>
checkpatch.pl complained about two single statement macros in
do while (0) loops. The loops and the trailing semicolons are
now removed, which makes checkpatch happy and the two macros
consistent with the rest of the file.
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
create_singlethread_workqueue() is a compat interface for single
threaded workqueue which maps to ordered workqueue w/ rescuer in the
current implementation. create_singlethread_workqueue() currently
implemented by invoking alloc_workqueue() w/ appropriate parameters.
8719dceae2 ("workqueue: reject adjusting max_active or applying
attrs to ordered workqueues") introduced __WQ_ORDERED to protect
ordered workqueues against dynamic attribute changes which can break
ordering guarantees but forgot to apply it to
create_singlethread_workqueue(). This in itself is okay as nobody
currently uses dynamic attribute change on workqueues created with
create_singlethread_workqueue().
However, 4c16bd327c ("workqueue: implement NUMA affinity for unbound
workqueues") broke singlethreaded guarantee for ordered workqueues
through allocating a separate pool_workqueue on each NUMA node by
default. A later change 8a2b753844 ("workqueue: fix ordered
workqueues in NUMA setups") fixed it by allocating only one global
pool_workqueue if __WQ_ORDERED is set.
Combined, the __WQ_ORDERED omission in create_singlethread_workqueue()
became critical breaking its single threadedness and ordering
guarantee.
Let's make create_singlethread_workqueue() wrap
alloc_ordered_workqueue() instead so that it inherits __WQ_ORDERED and
can implicitly track future ordered_workqueue changes.
v2: I missed that __WQ_ORDERED now protects against pwq splitting
across NUMA nodes and incorrectly described the patch as a
nice-to-have fix to protect against future dynamic attribute
usages. Oleg pointed out that this is actually a critical
breakage due to 8a2b753844 ("workqueue: fix ordered workqueues
in NUMA setups").
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Mike Anderson <mike.anderson@us.ibm.com>
Cc: Oleg Nesterov <onestero@redhat.com>
Cc: Gustavo Luiz Duarte <gduarte@redhat.com>
Cc: Tomas Henzl <thenzl@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 4c16bd327c ("workqueue: implement NUMA affinity for unbound workqueues")
In 8930caba3d ("workqueue: disable irq while manipulating PENDING"),
setting last CPU and clearing PENDING got merged into a single
operation (set_work_cpu_and_clear_pending()), which resulted that the
internal routine work_clear_pending() is not used any more.
tj: Minor description tweak.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
WORK_CPU_END is totally unused since 4e8b22bd1a ("workqueue: fix
pool ID allocation leakage and remove BUILD_BUG_ON() in
init_workqueues"). It should be removed.
After it is removed, the comment "special cpu IDs" is not precise due to
there is only one special CPU ID (WORK_CPU_UNBOUND) left, so we also
change this comment to the description for WORK_CPU_UNBOUND.
tj: Minor description and comment tweaks.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
system_highpri_wq is exported to modules via EXPORT_SYMBOL_GPL(),
but it was forgotten to be declared in workqueue.h. So we add the declaration
and a short description for it.
tj: Minor comment tweak.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
system_nrt[_freezable]_wq were deprecated by 3b07e9c ("workqueue:
deprecate system_nrt[_freezable]_wq") and have been deprecated
for a long time. In addition, these are not used anymore. So,
let's remove these functions.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
flush[_delayed]_work_sync() were deprecated by 4382973 ("workqueue:
deprecate flush[_delayed]_work_sync()") and have been deprecated
for a long time. In addition, these are not used anymore. So,
let's remove these functions.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull timer changes from Thomas Gleixner:
"This assorted collection provides:
- A new timer based timer broadcast feature for systems which do not
provide a global accessible timer device. That allows those
systems to put CPUs into deep idle states where the per cpu timer
device stops.
- A few NOHZ_FULL related improvements to the timer wheel
- The usual updates to timer devices found in ARM SoCs
- Small improvements and updates all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
tick: Remove code duplication in tick_handle_periodic()
tick: Fix spelling mistake in tick_handle_periodic()
x86: hpet: Use proper destructor for delayed work
workqueue: Provide destroy_delayed_work_on_stack()
clocksource: CMT, MTU2, TMU and STI should depend on GENERIC_CLOCKEVENTS
timer: Remove code redundancy while calling get_nohz_timer_target()
hrtimer: Rearrange comments in the order struct members are declared
timer: Use variable head instead of &work_list in __run_timers()
clocksource: exynos_mct: silence a static checker warning
arm: zynq: Add support for cpufreq
arm: zynq: Don't use arm_global_timer with cpufreq
clocksource/cadence_ttc: Overhaul clocksource frequency adjustment
clocksource/cadence_ttc: Call clockevents_update_freq() with IRQs enabled
clocksource: Add Kconfig entries for CMT, MTU2, TMU and STI
sh: Remove Kconfig entries for TMU, CMT and MTU2
ARM: shmobile: Remove CMT, TMU and STI Kconfig entries
clocksource: armada-370-xp: Use atomic access for shared registers
clocksource: orion: Use atomic access for shared registers
clocksource: timer-keystone: Delete unnecessary variable
clocksource: timer-keystone: introduce clocksource driver for Keystone
...
Tejun Heo has made WQ_NON_REENTRANT useless in the dbf2576e37
("workqueue: make all workqueues non-reentrant"). So remove its
usages and definition.
This patch doesn't introduce any behavior changes.
tj: minor description updates.
Signed-off-by: ZhangZhen <zhenzhang.zhang@huawei.com>
Sigend-off-by: Tejun Heo <tj@kernel.org>
Acked-by: James Chapman <jchapman@katalix.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Peter Hurley noticed that since a2c1c57be8 ("workqueue: consider
work function when searching for busy work items"), a work item which
gets assigned a different work function would break out of the
non-reentrancy guarantee as workqueue would consider it a different
work item.
This is fragile and extremely subtle. PREPARE_[DELAYED_]WORK() have
never been used widely and its semantics has always been somewhat
iffy. If the work item is known not to be on queue when
PREPARE_WORK() is called, there's no difference from using
INIT_WORK(). If the work item may be queued at the time of
PREPARE_WORK(), we can't really tell whether the old or new function
will be executed the next time.
We really don't want this level of subtlety in workqueue interface for
such marginal use cases. The previous patches converted all existing
users away from PREPARE_[DELAYED_]WORK(). Let's remove them.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Link: http://lkml.kernel.org/g/1392493119-9277-1-git-send-email-peter@hurleysoftware.com
To receive 70044d71d3 ("firewire: don't use PREPARE_DELAYED_WORK").
There will be further related updates in for-3.15 branch.
Signed-off-by: Tejun Heo <tj@kernel.org>
__cancel_delayed_work() was deprecated by 136b5721d7 ("workqueue:
deprecate __cancel_delayed_work()") as cancel_delayed_work() was
updated so that it could be used from all contexts. Enough time has
passed since the deprecation. Let's remove it.
tj: description update
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Tommi noticed a 'funny' lock class name: "%s#5" from a lock acquired in
process_one_work().
Maybe #fmt plus #args could be used as the lock_name to give some more
information for some fmt string like the above.
__builtin_constant_p() check is removed (as there seems no good way to
check all the variables in args list). However, by removing the check,
it only adds two additional "s for those constants.
Some lockdep name examples printed out after the change:
lockdep name wq->name
"events_long" events_long
"%s"("khelper") khelper
"xfs-data/%s"mp->m_fsname xfs-data/dm-3
Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
dbf2576e37 ("workqueue: make all workqueues non-reentrant") made
WQ_NON_REENTRANT no-op but the following patches didn't remove the
flag or update the documentation. Let's mark the flag deprecated and
update the documentation accordingly.
Signed-off-by: Tejun Heo <tj@kernel.org>
For the workqueue creation interfaces that do not expect format strings,
make sure they cannot accidently be parsed that way. Additionally, clean
up calls made with a single parameter that would be handled as a format
string. Many callers are passing potentially dynamic string content, so
use "%s" in those cases to avoid any potential accidents.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds system wide workqueues aligned towards power saving. This is
done by allocating them with WQ_UNBOUND flag if 'wq_power_efficient' is set to
'true'.
tj: updated comments a bit.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Workqueues can be performance or power-oriented. Currently, most workqueues are
bound to the CPU they were created on. This gives good performance (due to cache
effects) at the cost of potentially waking up otherwise idle cores (Idle from
scheduler's perspective. Which may or may not be physically idle) just to
process some work. To save power, we can allow the work to be rescheduled on a
core that is already awake.
Workqueues created with the WQ_UNBOUND flag will allow some power savings.
However, we don't change the default behaviour of the system. To enable
power-saving behaviour, a new config option CONFIG_WQ_POWER_EFFICIENT needs to
be turned on. This option can also be overridden by the
workqueue.power_efficient boot parameter.
tj: Updated config description and comments. Renamed
CONFIG_WQ_POWER_EFFICIENT to CONFIG_WQ_POWER_EFFICIENT_DEFAULT.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
One of the problems that arise when converting dedicated custom
threadpool to workqueue is that the shared worker pool used by workqueue
anonimizes each worker making it more difficult to identify what the
worker was doing on which target from the output of sysrq-t or debug
dump from oops, BUG() and friends.
This patch implements set_worker_desc() which can be called from any
workqueue work function to set its description. When the worker task is
dumped for whatever reason - sysrq-t, WARN, BUG, oops, lockdep assertion
and so on - the description will be printed out together with the
workqueue name and the worker function pointer.
The printing side is implemented by print_worker_info() which is called
from functions in task dump paths - sched_show_task() and
dump_stack_print_info(). print_worker_info() can be safely called on
any task in any state as long as the task struct itself is accessible.
It uses probe_*() functions to access worker fields. It may print
garbage if something went very wrong, but it wouldn't cause (another)
oops.
The description is currently limited to 24bytes including the
terminating \0. worker->desc_valid and workder->desc[] are added and
the 64 bytes marker which was already incorrect before adding the new
fields is moved to the correct position.
Here's an example dump with writeback updated to set the bdi name as
worker desc.
Hardware name: Bochs
Modules linked in:
Pid: 7, comm: kworker/u9:0 Not tainted 3.9.0-rc1-work+ #1
Workqueue: writeback bdi_writeback_workfn (flush-8:0)
ffffffff820a3ab0 ffff88000f6e9cb8 ffffffff81c61845 ffff88000f6e9cf8
ffffffff8108f50f 0000000000000000 0000000000000000 ffff88000cde16b0
ffff88000cde1aa8 ffff88001ee19240 ffff88000f6e9fd8 ffff88000f6e9d08
Call Trace:
[<ffffffff81c61845>] dump_stack+0x19/0x1b
[<ffffffff8108f50f>] warn_slowpath_common+0x7f/0xc0
[<ffffffff8108f56a>] warn_slowpath_null+0x1a/0x20
[<ffffffff81200150>] bdi_writeback_workfn+0x2a0/0x3b0
...
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Acked-by: Jan Kara <jack@suse.cz>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Unbound workqueues are now NUMA aware. Let's add some control knobs
and update sysfs interface accordingly.
* Add kernel param workqueue.numa_disable which disables NUMA affinity
globally.
* Replace sysfs file "pool_id" with "pool_ids" which contain
node:pool_id pairs. This change is userland-visible but "pool_id"
hasn't seen a release yet, so this is okay.
* Add a new sysf files "numa" which can toggle NUMA affinity on
individual workqueues. This is implemented as attrs->no_numa whichn
is special in that it isn't part of a pool's attributes. It only
affects how apply_workqueue_attrs() picks which pools to use.
After "pool_ids" change, first_pwq() doesn't have any user left.
Removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
There's no reason to make these trivial wrappers full (exported)
functions. Inline the followings.
queue_work()
queue_delayed_work()
mod_delayed_work()
schedule_work_on()
schedule_work()
schedule_delayed_work_on()
schedule_delayed_work()
keventd_up()
Signed-off-by: Tejun Heo <tj@kernel.org>
Implement a function which queries whether it currently is running off
a workqueue rescuer. This will be used to convert writeback to
workqueue.
Signed-off-by: Tejun Heo <tj@kernel.org>
There are cases where workqueue users want to expose control knobs to
userland. e.g. Unbound workqueues with custom attributes are
scheduled to be used for writeback workers and depending on
configuration it can be useful to allow admins to tinker with the
priority or allowed CPUs.
This patch implements workqueue_sysfs_register(), which makes the
workqueue visible under /sys/bus/workqueue/devices/WQ_NAME. There
currently are two attributes common to both per-cpu and unbound pools
and extra attributes for unbound pools including nice level and
cpumask.
If alloc_workqueue*() is called with WQ_SYSFS,
workqueue_sysfs_register() is called automatically as part of
workqueue creation. This is the preferred method unless the workqueue
user wants to apply workqueue_attrs before making the workqueue
visible to userland.
v2: Disallow exposing ordered workqueues as ordered workqueues can't
be tuned in any way.
Signed-off-by: Tejun Heo <tj@kernel.org>
Adjusting max_active of or applying new workqueue_attrs to an ordered
workqueue breaks its ordering guarantee. The former is obvious. The
latter is because applying attrs creates a new pwq (pool_workqueue)
and there is no ordering constraint between the old and new pwqs.
Make apply_workqueue_attrs() and workqueue_set_max_active() trigger
WARN_ON() if those operations are requested on an ordered workqueue
and fail / ignore respectively.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
We're gonna add another internal WQ flag. Let's make the distinction
clear. Prefix WQ_DRAINING with __ and move it to bit 16.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Implement apply_workqueue_attrs() which applies workqueue_attrs to the
specified unbound workqueue by creating a new pwq (pool_workqueue)
linked to worker_pool with the specified attributes.
A new pwq is linked at the head of wq->pwqs instead of tail and
__queue_work() verifies that the first unbound pwq has positive refcnt
before choosing it for the actual queueing. This is to cover the case
where creation of a new pwq races with queueing. As base ref on a pwq
won't be dropped without making another pwq the first one,
__queue_work() is guaranteed to make progress and not add work item to
a dead pwq.
init_and_link_pwq() is updated to return the last first pwq the new
pwq replaced, which is put by apply_workqueue_attrs().
Note that apply_workqueue_attrs() is almost identical to unbound pwq
part of alloc_and_link_pwqs(). The only difference is that there is
no previous first pwq. apply_workqueue_attrs() is implemented to
handle such cases and replaces unbound pwq handling in
alloc_and_link_pwqs().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
WQ_RESCUER is superflous. WQ_MEM_RECLAIM indicates that the user
wants a rescuer and testing wq->rescuer for NULL can answer whether a
given workqueue has a rescuer or not. Drop WQ_RESCUER and test
wq->rescuer directly.
This will help simplifying __alloc_workqueue_key() failure path by
allowing it to use destroy_workqueue() on a partially constructed
workqueue, which in turn will help implementing dynamic management of
pool_workqueues.
While at it, clear wq->rescuer after freeing it in
destroy_workqueue(). This is a precaution as scheduled changes will
make destruction more complex.
This patch doesn't introduce any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Introduce struct workqueue_attrs which carries worker attributes -
currently the nice level and allowed cpumask along with helper
routines alloc_workqueue_attrs() and free_workqueue_attrs().
Each worker_pool now carries ->attrs describing the attributes of its
workers. All functions dealing with cpumask and nice level of workers
are updated to follow worker_pool->attrs instead of determining them
from other characteristics of the worker_pool, and init_workqueues()
is updated to set worker_pool->attrs appropriately for all standard
pools.
Note that create_worker() is updated to always perform set_user_nice()
and use set_cpus_allowed_ptr() combined with manual assertion of
PF_THREAD_BOUND instead of kthread_bind(). This simplifies handling
random attributes without affecting the outcome.
This patch doesn't introduce any behavior changes.
v2: Missing cpumask_var_t definition caused build failure on some
archs. linux/cpumask.h included.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Workqueue is mixing unsigned int and int for @cpu variables. There's
no point in using unsigned int for cpus - many of cpu related APIs
take int anyway. Consistently use int for @cpu variables so that we
can use negative values to mark special ones.
This patch doesn't introduce any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
When a work item is off-queue, its work->data contains WORK_STRUCT_*
and WORK_OFFQ_* flags. As WORK_OFFQ_* flags are used only while a
work item is off-queue, it can occupy bits of work->data which aren't
used while off-queue. WORK_OFFQ_* currently only use bits used by
on-queue CWQ pointer. As color bits aren't used while off-queue,
there's no reason to not use them.
Lower WORK_OFFQ_FLAG_BASE from WORK_STRUCT_FLAG_BITS to
WORK_STRUCT_COLOR_SHIFT thus giving 4 more bits to off-queue flag
space which is also used to record worker_pool ID while off-queue.
This doesn't introduce any visible behavior difference.
tj: Rewrote the description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
workqueue has moved away from global_cwqs to worker_pools and with the
scheduled custom worker pools, wforkqueues will be associated with
pools which don't have anything to do with CPUs. The workqueue code
went through significant amount of changes recently and mass renaming
isn't likely to hurt much additionally. Let's replace 'cpu' with
'pool' so that it reflects the current design.
* s/struct cpu_workqueue_struct/struct pool_workqueue/
* s/cpu_wq/pool_wq/
* s/cwq/pwq/
This patch is purely cosmetic.
Signed-off-by: Tejun Heo <tj@kernel.org>
To avoid executing the same work item from multiple CPUs concurrently,
a work_struct records the last pool it was on in its ->data so that,
on the next queueing, the pool can be queried to determine whether the
work item is still executing or not.
A delayed_work goes through timer before actually being queued on the
target workqueue and the timer needs to know the target workqueue and
CPU. This is currently achieved by modifying delayed_work->work.data
such that it points to the cwq which points to the target workqueue
and the last CPU the work item was on. __queue_delayed_work()
extracts the last CPU from delayed_work->work.data and then combines
it with the target workqueue to create new work.data.
The only thing this rather ugly hack achieves is encoding the target
workqueue into delayed_work->work.data without using a separate field,
which could be a trade off one can make; unfortunately, this entangles
work->data management between regular workqueue and delayed_work code
by setting cwq pointer before the work item is actually queued and
becomes a hindrance for further improvements of work->data handling.
This can be easily made sane by adding a target workqueue field to
delayed_work. While delayed_work is used widely in the kernel and
this does make it a bit larger (<5%), I think this is the right
trade-off especially given the prospect of much saner handling of
work->data which currently involves quite tricky memory barrier
dancing, and don't expect to see any measureable effect.
Add delayed_work->wq and drop the delayed_work->work.data overloading.
tj: Rewrote the description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Now that workqueue has moved away from gcwqs, workqueue no longer has
the need to have a CPU identifier indicating "no cpu associated" - we
now use WORK_OFFQ_POOL_NONE instead - and most uses of WORK_CPU_NONE
are gone.
The only left usage is as the end marker for for_each_*wq*()
iterators, where the name WORK_CPU_NONE is confusing w/o actual
WORK_CPU_NONE usages. Similarly, WORK_CPU_LAST which equals
WORK_CPU_NONE no longer makes sense.
Replace both WORK_CPU_NONE and LAST with WORK_CPU_END. This patch
doesn't introduce any functional difference.
tj: s/WORK_CPU_LAST/WORK_CPU_END/ and rewrote the description.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, when a work item is off-queue, work->data records the CPU
it was last on, which is used to locate the last executing instance
for non-reentrance, flushing, etc.
We're in the process of removing global_cwq and making worker_pool the
top level abstraction. This patch makes work->data point to the pool
it was last associated with instead of CPU.
After the previous WORK_OFFQ_POOL_CPU and worker_poo->id additions,
the conversion is fairly straight-forward. WORK_OFFQ constants and
functions are modified to record and read back pool ID instead.
worker_pool_by_id() is added to allow looking up pool from ID.
get_work_pool() replaces get_work_gcwq(), which is reimplemented using
get_work_pool(). get_work_pool_id() replaces work_cpu().
This patch shouldn't introduce any observable behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Currently, when a work item is off queue, high bits of its data
encodes the last CPU it was on. This is scheduled to be changed to
pool ID, which will make it impossible to use WORK_CPU_NONE to
indicate no association.
This patch limits the number of bits which are used for off-queue cpu
number to 31 (so that the max fits in an int) and uses the highest
possible value - WORK_OFFQ_CPU_NONE - to indicate no association.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
This function no longer has any external users. Unexport it. It will
be removed later on.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
