gps: update gps version 4.13.1.37 am: bc0094b214 am: 1e075f12e2

Original change: https://googleplex-android-review.googlesource.com/c/device/google/akita/+/25467677

Change-Id: Ib7cfcd6be840b9408402922da02d8eb82d1eea94
Signed-off-by: Automerger Merge Worker <android-build-automerger-merge-worker@system.gserviceaccount.com>

location/gnssd/gnss_release.mk

@@ -7,7 +7,8 @@ PRODUCT_PACKAGES += \
     android.hardware.location.gps.prebuilt.xml
 
 PRODUCT_COPY_FILES += \
-    device/google/akita/location/gnssd/release/ca.pem:vendor/etc/gnss/ca.pem
+    device/google/akita/location/gnssd/release/ca.pem:vendor/etc/gnss/ca.pem \
+    device/google/akita/location/gnssd/release/kepler.bin:vendor/firmware/kepler.bin
 
 PRODUCT_SOONG_NAMESPACES += \
     device/google/akita/location/gnssd

location/gnssd/release/gps.cfg

@@ -17,10 +17,15 @@ uni_log_max_size_mb=20
 uni_log_total_max_size_mb=100
 
 gnss_device_type=K041
+gnss_device_patch_address=0
+gnss_device_patch_file=/vendor/firmware/kepler.bin
 
 # send debug req on MCW oddity
 #Chip_Configuration_Io_Options=0x85
 
+# Enable dynamic HSI
+Chip_Configuration_Dynamic_HSI=0
+
 # borrow this field to force CP crash on GAL bad ISM
 #Chip_Configuration_WT1=1
 

location/gnssd/release/gps_user.cfg

@@ -1,137 +1,40 @@
-############################################
 GlueLayer_ToolConfigSelection=3
 debug_console=0
 debug_enable=0
 mem_dump_to_node=0
-############################################
 GlueLayer_IsGedKeyExist=1
 GlueLayer_EnableGnssCfgInterface=1
-
-
-uni_log_max_file_count=5
-uni_log_max_size_mb=20
-uni_log_total_max_size_mb=100
-
 gnss_device_type=K041
-
+gnss_device_patch_address=0
-# send debug req on MCW oddity
+gnss_device_patch_file=/vendor/firmware/kepler.bin
-#Chip_Configuration_Io_Options=0x85
+Chip_Configuration_Dynamic_HSI=0
-
-# borrow this field to force CP crash on GAL bad ISM
-#Chip_Configuration_WT1=1
-
-# Chip_Configuration_TrackerDebugMode = 0x10
 GlueLayer_IsPlatformRefTimeEnable=1
-
-# enables CHPP for SPI port
-# uncomment the *chpp* lines below (and comment gnss_device-data_port_kepslim_present above) to use SPI+CHPP
-# when using CHPP, make sure to enable the CHPP defines in build_settings.mak
 chpp_betp_client=1
 chpp_log_level=2
 gnss_device_data_port_chpp_spi_device=/dev/gnss_ipc
 gnss_device_data_port_chpp_present=1
-
-### Update for VTS ###
 GlueLayer_YearOfHW=2023
 scheduling_enabled=1
-
-### temporarily disable precise time aiding ###
 Chip_Configuration_AidingConfiguration=0x00020046
-
-# set shared reference clock for freq aiding (0x20)
-# enable dcxo (0x04)
 Chip_Configuration_RefClkControl=0x24
-
-### Override for DCXO Cnom/TuneValue
-#Chip_Configuration_DCXOtuneValue=3200
-
-### DCXO Optional Parameters. #####
-#   Can specify Crystal type, and/or over-ride T0-inflection point ####
-#
-# Optionally specify DXCO Crystal type, and operation mode
-# 8 bits.  Lower 4 bits Crystal ID# (0-15)
-#          Upper 4 bits Poly Configuration: (0/1)
-# Poly Configuration: 0: Use CP's poly, 1: Force use of default manufactures polynomial
-### Crystal Types:
-## 0 - Unknown/Default
-## 1 - Kyocera CT1612RB
-## 2 - NDK NX1612SD CS12311
-## 3 - NDK NX1612SD CS13950
-## 4 - NDK NX1612SD CS15298
-## 5 - KDS 7CG07680A10
-## 6-  TXC 0W76870003
-## E.g. Use Kyocera, and ignore CP's polynomial: DCXO_CrystalType=0x11
-## E.g. Use KDS, and Use CP's polynomial: DCXO_CrystalType=0x05
 Chip_Configuration_DCXO_CrystalType=0x11
-
-## Optionally specify DXCO Inflection point temperature,        ####
-#    This will override any default value or value in Crystal type ####
-#    Value is degrees C x 100 E.g. 2855 = 28.55 deg C
-#    Range should be 2000 to 3100
-#Chip_Configuration_DCXO_InflectionPoint=2855
-
-# disable spam dog to avoid loss of position request
-spam_dog_ms=0
-# disable HW watchdog
 Chip_Configuration_WatchdogPeriod = 0
-
-# GPS= 0x0001 GLO= 0x0002 GALILEO=0x0004 BEIDOU=0x0008 SBAS=0x0010 QZSS=0x0020
-# MEMS Static Detect=0x4000 MEMS Heading=0x2000
-### 2C48 L1 only MCW ###
 Chip_Configuration_GNSSConstConstraintDef=0x602F
 Chip_Configuration_RfMiscCtrl=0x80008001
-
-# Disable BDS in the U.S.
 bdsUsedInUSPolicy=2
 sbasUsedInUSPolicy=2
 qzssUsedInUSPolicy=2
 navicUsedInUSPolicy=2
-
-# DVS: 0 = Disabled (default), 1 = Enabled
-# DFS: 0 = Disabled (default), 1 = Enabled
 Chip_Configuration_FeatureCfg_DVS = 1
 Chip_Configuration_FeatureCfg_DFS = 1
-
-# This is a bitfield that will disable incoming interrupts for mailboxes
-# AP   = 0x1
-# APM  = 0x2
-# CP   = 0x4
-# CHUB = 0x8
-# The CHUB on the neus continually triggers a bit so this is to prevent
-# it from continually waking the gnss.
 mailboxDisabled=0x8
-
-### Specify RFIC ID for K40 ###
-# 55200001 = S5520 EVT1
 gnss_rfic_chip_id=55200001
-
-# Uncomment to Disable SUPL
-#Aiding_AidingType=0
-# Uncomment to Disable SUPL (Ignore Android Framework Requests to Enable SUPL)
-#GlueLayer_EnableFwConfiguration=0
-
-#Uncomment to disable SGEE
-#Sif_OperationMode=0
-
-# Enables RTC time aiding from Host
-# 1 - enable, 0 - disable (default)
 UseRtcForAiding=1
-
-# Min number of prior fixes needed for RTC time aiding
 rtc_min_num_of_fixes=10
-
-# increase rtc uncertainty from Host to hedge against bad fixes
 additional_rtc_uncertainty_ms=10
-
-# set to 1 for FW SGEE download - Requires Android FW to be properly configured
 Sif_UseFwXtraInterface=1
-
-# Low power configurations
-# ACT C/No loss limit: 0dB to 15dB (0 = ACT is disabled by default) 3dB = 50% Duty Cycle, 6dB = 25% Duty Cycle, 9dB = 12.5% Duty Cycle
 Chip_Configuration_FeatureCfg_ACT = 5
-
 ChipCfg_DspMemdumpEnable=1
-
 Agnss_IsGloAidingEnable=0
 Agnss_SuplUseCpNi=1
 SETCaps_IsOtdoa=1
@@ -152,14 +55,12 @@ UP_LocTech_PrimaryConst=0
 UP_LocTech_Constraints=1
 UP_LocTech_Requirements=0
 SpotLogger_Allowed=0
-
 RfPathLossDb_Ap=3500
 RfPathLossDb_Cp=3500
 NmeaBitmask=0x010003fff
 IsUseEntireRespTime911=1
-
 GNSS_CARRIER_CONFIG_BEGIN
-# DEFAULT
+
 GNSS_CARRIER_ID=0
 ENABLE_2G_CP_CAPS_MSA=1
 ENABLE_2G_CP_CAPS_MSB=1
@@ -189,35 +90,35 @@ ENABLE_NLP_IN_LPPE=1
 ENABLE_NLP_IN_AGNSS=0
 ENABLE_LPP_HA_GAD_SHAPE=0
 USE_EMER_PDN_FOR_EMER_SUPL=1
-# ATT
+
 GNSS_CARRIER_ID=1
-# TMO
+
 GNSS_CARRIER_ID=2
 ENABLE_3G_CP_CAPS_MSA=0
 ENABLE_4G_CP_CAPS_MSA=0
 ENABLE_NLP_IN_LPPE=0
 ENABLE_NLP_IN_AGNSS=1
 ENABLE_LPP_HA_GAD_SHAPE=1
-# VZW
+
 GNSS_CARRIER_ID=3
 ENABLE_LPP_UP=1
 ENABLE_LPPE_UP=3
 SUPL_UT2_SEC=10
 SUPL_UT3_SEC=30
 SUPL_SSL_METHOD=TLSv1_2
-# AIRTEL
+
 GNSS_CARRIER_ID=4
-# RAKUTEN
+
 GNSS_CARRIER_ID=5
 ENABLE_LPP_UP=1
 ENABLE_LPPE_UP=3
-# KDDI
+
 GNSS_CARRIER_ID=6
 ENABLE_LPP_CP=0
 ENABLE_LPP_UP=1
 ENABLE_LPPE_CP=0
 ENABLE_LPPE_UP=3
-# SBM
+
 GNSS_CARRIER_ID=7
 ENABLE_LPP_CP=0
 ENABLE_LPPE_CP=0
@@ -225,14 +126,13 @@ ENABLE_5G_CP_CAPS_MSA=0
 ENABLE_5G_CP_CAPS_MSB=0
 SUPL_SSL_METHOD=TLSv1
 USE_EMER_PDN_FOR_EMER_SUPL=0
-# DOCOMO
+
 GNSS_CARRIER_ID=8
-# LAB
+
 GNSS_CARRIER_ID=9
 ENABLE_LPP_UP=1
 ENABLE_LPPE_UP=3
 GNSS_CARRIER_CONFIG_END
 
-# TODO - should remove after NFW implementation done
 GlueLayer_IsUseNfwLocAccess=0
 GlueLayer_IsUseNfwVCLocAccess=0