From 3563210826cf9126b87d291ddb2216a1c2b45610 Mon Sep 17 00:00:00 2001 From: James Huang Date: Fri, 12 Apr 2024 11:51:48 +0800 Subject: [PATCH] gps: Updae gnss FW 4.15.1_4 + config for P24 Add CP_LocTech_Constraints to 0x81 to support AGPS L5 Remove L5 path delay to use Lassen's default one Enable GNSS L5 Enable Soft dog to prevent gnss not recovering after modem_reset Disable OTDOA due to VZW network fix isn't yet ready. Bug: 333712582 Bug: 315713904 Bug: 332033831 Bug: 334697965 Test: VTS/CTS test and sanity/SST test b/333846456 Change-Id: Ib622bc5a83f8d0796dfe73b782ebc4985b47c378 --- location/caiman/user/gps.cfg | 14 +++++--------- location/caiman/userdebug/gps.cfg | 18 ++++++------------ location/komodo/user/gps.cfg | 14 +++++--------- location/komodo/userdebug/gps.cfg | 18 ++++++------------ location/ripcurrent24/user/gps.cfg | 11 ++++++----- location/ripcurrent24/userdebug/gps.cfg | 13 ++++++------- location/ripcurrentpro/user/gps.cfg | 10 +++++----- location/ripcurrentpro/userdebug/gps.cfg | 13 ++++++------- location/tokay/user/gps.cfg | 14 +++++--------- location/tokay/userdebug/gps.cfg | 18 ++++++------------ 10 files changed, 56 insertions(+), 87 deletions(-) diff --git a/location/caiman/user/gps.cfg b/location/caiman/user/gps.cfg index bfe420ff..27becc0b 100644 --- a/location/caiman/user/gps.cfg +++ b/location/caiman/user/gps.cfg @@ -23,8 +23,8 @@ ChipCfg_VDR_low_end_Time = 20 Chip_Configuration_AidingConfiguration=0x00020046 Chip_Configuration_RefClkControl=0x24 Chip_Configuration_DCXO_CrystalType=0x11 -# L1 only, TODO: should remove below line to enable L5 back once b/329003269 fixed. -LocTech_Constraints = 0x603F +Chip_Configuration_GNSSConstConstraintDef = 0x60BF +LocTech_Constraints = 0x60BF Chip_Configuration_RfMiscCtrl = 0x80008001 bdsUsedInUSPolicy=2 sbasUsedInUSPolicy=2 @@ -47,20 +47,15 @@ GlueLayer_isReqDBHFromFwRefLoc=1 GlueLayer_isReqUBPFromPressureSensor=1 GlueLayer_IsMemsEnable=1 GlueLayer_MeasCorrCap=7 -Chip_Configuration_mems_data_Configuration=0x37 +Chip_Configuration_mems_data_Configuration=0x17 Chip_Configuration_FeatureCfg_ANDRD_MEAS_CORR_ENABLE=1 CP_LocTech_PrimaryConst=0 -CP_LocTech_Constraints=1 +CP_LocTech_Constraints=0x81 CP_LocTech_Requirements=0 UP_LocTech_PrimaryConst=0 UP_LocTech_Constraints=1 UP_LocTech_Requirements=0 SpotLogger_Allowed=0 -soft_dog=0 -path_delay_glo_12fx_cm=-5076,-5076,-5064,-5022,-4982,-4916,-4879,-4800,-4704,-4647,-4628,-4573,-4522,-4493 -path_delay_gps_2fx_cm=12371 -path_delay_bds_4fx_cm=123 -path_delay_l5_20fx_cm=105888 RfPathLossDb_Ap=3210 RfPathLossDb_Cp=3210 RfPathLossDb_L5_Ap=4450 @@ -112,6 +107,7 @@ ENABLE_NLP_IN_AGNSS=1 ENABLE_LPP_HA_GAD_SHAPE=1 GNSS_CARRIER_ID=3 +ENABLE_CAPS_OTDOA=0 ENABLE_LPP_UP=1 ENABLE_LPPE_UP=3 SUPL_SSL_METHOD=TLSv1_2 diff --git a/location/caiman/userdebug/gps.cfg b/location/caiman/userdebug/gps.cfg index 4c052202..7c67135a 100644 --- a/location/caiman/userdebug/gps.cfg +++ b/location/caiman/userdebug/gps.cfg @@ -86,15 +86,15 @@ Chip_Configuration_RefClkControl=0x24 ## LOOK! S5400 ERD's uses NDK(2), Phones use Kyocera(1). Default set to phone (1) Chip_Configuration_DCXO_CrystalType=0x11 -# L1 only, TODO: should remove below line to enable L5 back once b/329003269 fixed. -LocTech_Constraints = 0x603F - ## Optionally specify DXCO Inflection point temperature, #### # This will override any default value or value in Crystal type #### # Value is degrees C x 100 E.g. 2855 = 28.55 deg C # Range should be 2000 to 3100 #Chip_Configuration_DCXO_InflectionPoint=2855 +# L1 + L5 MCW +Chip_Configuration_GNSSConstConstraintDef = 0x60BF +LocTech_Constraints = 0x60BF Chip_Configuration_RfMiscCtrl = 0x80008001 ### 2C48 L1 only MCW ### @@ -171,23 +171,16 @@ GlueLayer_isReqDBHFromFwRefLoc=1 GlueLayer_isReqUBPFromPressureSensor=1 GlueLayer_IsMemsEnable=1 GlueLayer_MeasCorrCap=7 -Chip_Configuration_mems_data_Configuration=0x37 +Chip_Configuration_mems_data_Configuration=0x17 Chip_Configuration_FeatureCfg_ANDRD_MEAS_CORR_ENABLE=1 CP_LocTech_PrimaryConst=0 -CP_LocTech_Constraints=1 +CP_LocTech_Constraints=0x81 CP_LocTech_Requirements=0 UP_LocTech_PrimaryConst=0 UP_LocTech_Constraints=1 UP_LocTech_Requirements=0 SpotLogger_Allowed=0 -soft_dog=0 - -path_delay_glo_12fx_cm=-5076,-5076,-5064,-5022,-4982,-4916,-4879,-4800,-4704,-4647,-4628,-4573,-4522,-4493 -path_delay_gps_2fx_cm=12371 -path_delay_bds_4fx_cm=123 -path_delay_l5_20fx_cm=105888 - RfPathLossDb_Ap=3210 RfPathLossDb_Cp=3210 RfPathLossDb_L5_Ap=4450 @@ -251,6 +244,7 @@ ENABLE_NLP_IN_AGNSS=1 ENABLE_LPP_HA_GAD_SHAPE=1 # VZW GNSS_CARRIER_ID=3 +ENABLE_CAPS_OTDOA=0 ENABLE_LPP_UP=1 ENABLE_LPPE_UP=3 SUPL_SSL_METHOD=TLSv1_2 diff --git a/location/komodo/user/gps.cfg b/location/komodo/user/gps.cfg index 47453d47..e1792b9d 100644 --- a/location/komodo/user/gps.cfg +++ b/location/komodo/user/gps.cfg @@ -23,8 +23,8 @@ ChipCfg_VDR_low_end_Time = 20 Chip_Configuration_AidingConfiguration=0x00020046 Chip_Configuration_RefClkControl=0x24 Chip_Configuration_DCXO_CrystalType=0x11 -# L1 only, TODO: should remove below line to enable L5 back once b/329003269 fixed. -LocTech_Constraints = 0x603F +Chip_Configuration_GNSSConstConstraintDef = 0x60BF +LocTech_Constraints = 0x60BF Chip_Configuration_RfMiscCtrl = 0x80008001 bdsUsedInUSPolicy=2 sbasUsedInUSPolicy=2 @@ -47,20 +47,15 @@ GlueLayer_isReqDBHFromFwRefLoc=1 GlueLayer_isReqUBPFromPressureSensor=1 GlueLayer_IsMemsEnable=1 GlueLayer_MeasCorrCap=7 -Chip_Configuration_mems_data_Configuration=0x37 +Chip_Configuration_mems_data_Configuration=0x17 Chip_Configuration_FeatureCfg_ANDRD_MEAS_CORR_ENABLE=1 CP_LocTech_PrimaryConst=0 -CP_LocTech_Constraints=1 +CP_LocTech_Constraints=0x81 CP_LocTech_Requirements=0 UP_LocTech_PrimaryConst=0 UP_LocTech_Constraints=1 UP_LocTech_Requirements=0 SpotLogger_Allowed=0 -soft_dog=0 -path_delay_glo_12fx_cm=-5185,-5158,-5112,-5111,-5031,-4972,-4900,-4823,-4765,-4714,-4625,-4613,-4553,-4553 -path_delay_gps_2fx_cm=12378 -path_delay_bds_4fx_cm=168 -path_delay_l5_20fx_cm=105902 RfPathLossDb_Ap=3520 RfPathLossDb_Cp=3520 RfPathLossDb_L5_Ap=3700 @@ -112,6 +107,7 @@ ENABLE_NLP_IN_AGNSS=1 ENABLE_LPP_HA_GAD_SHAPE=1 GNSS_CARRIER_ID=3 +ENABLE_CAPS_OTDOA=0 ENABLE_LPP_UP=1 ENABLE_LPPE_UP=3 SUPL_SSL_METHOD=TLSv1_2 diff --git a/location/komodo/userdebug/gps.cfg b/location/komodo/userdebug/gps.cfg index e407c8bf..e484f7c4 100644 --- a/location/komodo/userdebug/gps.cfg +++ b/location/komodo/userdebug/gps.cfg @@ -86,15 +86,15 @@ Chip_Configuration_RefClkControl=0x24 ## LOOK! S5400 ERD's uses NDK(2), Phones use Kyocera(1). Default set to phone (1) Chip_Configuration_DCXO_CrystalType=0x11 -# L1 only, TODO: should remove below line to enable L5 back once b/329003269 fixed. -LocTech_Constraints = 0x603F - ## Optionally specify DXCO Inflection point temperature, #### # This will override any default value or value in Crystal type #### # Value is degrees C x 100 E.g. 2855 = 28.55 deg C # Range should be 2000 to 3100 #Chip_Configuration_DCXO_InflectionPoint=2855 +# L1 + L5 MCW +Chip_Configuration_GNSSConstConstraintDef = 0x60BF +LocTech_Constraints = 0x60BF Chip_Configuration_RfMiscCtrl = 0x80008001 ### 2C48 L1 only MCW ### @@ -171,23 +171,16 @@ GlueLayer_isReqDBHFromFwRefLoc=1 GlueLayer_isReqUBPFromPressureSensor=1 GlueLayer_IsMemsEnable=1 GlueLayer_MeasCorrCap=7 -Chip_Configuration_mems_data_Configuration=0x37 +Chip_Configuration_mems_data_Configuration=0x17 Chip_Configuration_FeatureCfg_ANDRD_MEAS_CORR_ENABLE=1 CP_LocTech_PrimaryConst=0 -CP_LocTech_Constraints=1 +CP_LocTech_Constraints=0x81 CP_LocTech_Requirements=0 UP_LocTech_PrimaryConst=0 UP_LocTech_Constraints=1 UP_LocTech_Requirements=0 SpotLogger_Allowed=0 -soft_dog=0 - -path_delay_glo_12fx_cm=-5185,-5158,-5112,-5111,-5031,-4972,-4900,-4823,-4765,-4714,-4625,-4613,-4553,-4553 -path_delay_gps_2fx_cm=12378 -path_delay_bds_4fx_cm=168 -path_delay_l5_20fx_cm=105902 - RfPathLossDb_Ap=3520 RfPathLossDb_Cp=3520 RfPathLossDb_L5_Ap=3700 @@ -251,6 +244,7 @@ ENABLE_NLP_IN_AGNSS=1 ENABLE_LPP_HA_GAD_SHAPE=1 # VZW GNSS_CARRIER_ID=3 +ENABLE_CAPS_OTDOA=0 ENABLE_LPP_UP=1 ENABLE_LPPE_UP=3 SUPL_SSL_METHOD=TLSv1_2 diff --git a/location/ripcurrent24/user/gps.cfg b/location/ripcurrent24/user/gps.cfg index 4ba5a9fd..4f22c7c4 100644 --- a/location/ripcurrent24/user/gps.cfg +++ b/location/ripcurrent24/user/gps.cfg @@ -23,8 +23,8 @@ ChipCfg_VDR_low_end_Time = 20 Chip_Configuration_AidingConfiguration=0x00020046 Chip_Configuration_RefClkControl=0x24 Chip_Configuration_DCXO_CrystalType=0x11 -# L1 only, TODO: should remove below line to enable L5 back once b/329003269 fixed. -LocTech_Constraints = 0x603F +Chip_Configuration_GNSSConstConstraintDef = 0x60BF +LocTech_Constraints = 0x60BF Chip_Configuration_RfMiscCtrl = 0x80008001 bdsUsedInUSPolicy=2 sbasUsedInUSPolicy=2 @@ -47,18 +47,18 @@ GlueLayer_isReqDBHFromFwRefLoc=1 GlueLayer_isReqUBPFromPressureSensor=1 GlueLayer_IsMemsEnable=1 GlueLayer_MeasCorrCap=7 -Chip_Configuration_mems_data_Configuration=0x37 +Chip_Configuration_mems_data_Configuration=0x17 Chip_Configuration_FeatureCfg_ANDRD_MEAS_CORR_ENABLE=1 CP_LocTech_PrimaryConst=0 -CP_LocTech_Constraints=1 +CP_LocTech_Constraints=0x81 CP_LocTech_Requirements=0 UP_LocTech_PrimaryConst=0 UP_LocTech_Constraints=1 UP_LocTech_Requirements=0 SpotLogger_Allowed=0 -soft_dog=0 IsUseEntireRespTime911=1 isForceHighAccuracyMode=1 +cp_partial_reset_disable=1 isUseUncalAccel=1 GNSS_CARRIER_CONFIG_BEGIN @@ -103,6 +103,7 @@ ENABLE_NLP_IN_AGNSS=1 ENABLE_LPP_HA_GAD_SHAPE=1 GNSS_CARRIER_ID=3 +ENABLE_CAPS_OTDOA=0 ENABLE_LPP_UP=1 ENABLE_LPPE_UP=3 SUPL_SSL_METHOD=TLSv1_2 diff --git a/location/ripcurrent24/userdebug/gps.cfg b/location/ripcurrent24/userdebug/gps.cfg index bdd06866..3b476738 100644 --- a/location/ripcurrent24/userdebug/gps.cfg +++ b/location/ripcurrent24/userdebug/gps.cfg @@ -86,15 +86,15 @@ Chip_Configuration_RefClkControl=0x24 ## LOOK! S5400 ERD's uses NDK(2), Phones use Kyocera(1). Default set to phone (1) Chip_Configuration_DCXO_CrystalType=0x11 -# L1 only, TODO: should remove below line to enable L5 back once b/329003269 fixed. -LocTech_Constraints = 0x603F - ## Optionally specify DXCO Inflection point temperature, #### # This will override any default value or value in Crystal type #### # Value is degrees C x 100 E.g. 2855 = 28.55 deg C # Range should be 2000 to 3100 #Chip_Configuration_DCXO_InflectionPoint=2855 +# L1 + L5 MCW +Chip_Configuration_GNSSConstConstraintDef = 0x60BF +LocTech_Constraints = 0x60BF Chip_Configuration_RfMiscCtrl = 0x80008001 ### 2C48 L1 only MCW ### @@ -171,18 +171,16 @@ GlueLayer_isReqDBHFromFwRefLoc=1 GlueLayer_isReqUBPFromPressureSensor=1 GlueLayer_IsMemsEnable=1 GlueLayer_MeasCorrCap=7 -Chip_Configuration_mems_data_Configuration=0x37 +Chip_Configuration_mems_data_Configuration=0x17 Chip_Configuration_FeatureCfg_ANDRD_MEAS_CORR_ENABLE=1 CP_LocTech_PrimaryConst=0 -CP_LocTech_Constraints=1 +CP_LocTech_Constraints=0x81 CP_LocTech_Requirements=0 UP_LocTech_PrimaryConst=0 UP_LocTech_Constraints=1 UP_LocTech_Requirements=0 SpotLogger_Allowed=0 -soft_dog=0 - NmeaBitmask=0x010003fff # force engine to use entire response time for emergency session; default 0 @@ -242,6 +240,7 @@ ENABLE_NLP_IN_AGNSS=1 ENABLE_LPP_HA_GAD_SHAPE=1 # VZW GNSS_CARRIER_ID=3 +ENABLE_CAPS_OTDOA=0 ENABLE_LPP_UP=1 ENABLE_LPPE_UP=3 SUPL_SSL_METHOD=TLSv1_2 diff --git a/location/ripcurrentpro/user/gps.cfg b/location/ripcurrentpro/user/gps.cfg index dd25c041..4f22c7c4 100644 --- a/location/ripcurrentpro/user/gps.cfg +++ b/location/ripcurrentpro/user/gps.cfg @@ -23,8 +23,8 @@ ChipCfg_VDR_low_end_Time = 20 Chip_Configuration_AidingConfiguration=0x00020046 Chip_Configuration_RefClkControl=0x24 Chip_Configuration_DCXO_CrystalType=0x11 -# L1 only, TODO: should remove below line to enable L5 back once b/329003269 fixed. -LocTech_Constraints = 0x603F +Chip_Configuration_GNSSConstConstraintDef = 0x60BF +LocTech_Constraints = 0x60BF Chip_Configuration_RfMiscCtrl = 0x80008001 bdsUsedInUSPolicy=2 sbasUsedInUSPolicy=2 @@ -47,16 +47,15 @@ GlueLayer_isReqDBHFromFwRefLoc=1 GlueLayer_isReqUBPFromPressureSensor=1 GlueLayer_IsMemsEnable=1 GlueLayer_MeasCorrCap=7 -Chip_Configuration_mems_data_Configuration=0x37 +Chip_Configuration_mems_data_Configuration=0x17 Chip_Configuration_FeatureCfg_ANDRD_MEAS_CORR_ENABLE=1 CP_LocTech_PrimaryConst=0 -CP_LocTech_Constraints=1 +CP_LocTech_Constraints=0x81 CP_LocTech_Requirements=0 UP_LocTech_PrimaryConst=0 UP_LocTech_Constraints=1 UP_LocTech_Requirements=0 SpotLogger_Allowed=0 -soft_dog=0 IsUseEntireRespTime911=1 isForceHighAccuracyMode=1 cp_partial_reset_disable=1 @@ -104,6 +103,7 @@ ENABLE_NLP_IN_AGNSS=1 ENABLE_LPP_HA_GAD_SHAPE=1 GNSS_CARRIER_ID=3 +ENABLE_CAPS_OTDOA=0 ENABLE_LPP_UP=1 ENABLE_LPPE_UP=3 SUPL_SSL_METHOD=TLSv1_2 diff --git a/location/ripcurrentpro/userdebug/gps.cfg b/location/ripcurrentpro/userdebug/gps.cfg index bdd06866..3b476738 100644 --- a/location/ripcurrentpro/userdebug/gps.cfg +++ b/location/ripcurrentpro/userdebug/gps.cfg @@ -86,15 +86,15 @@ Chip_Configuration_RefClkControl=0x24 ## LOOK! S5400 ERD's uses NDK(2), Phones use Kyocera(1). Default set to phone (1) Chip_Configuration_DCXO_CrystalType=0x11 -# L1 only, TODO: should remove below line to enable L5 back once b/329003269 fixed. -LocTech_Constraints = 0x603F - ## Optionally specify DXCO Inflection point temperature, #### # This will override any default value or value in Crystal type #### # Value is degrees C x 100 E.g. 2855 = 28.55 deg C # Range should be 2000 to 3100 #Chip_Configuration_DCXO_InflectionPoint=2855 +# L1 + L5 MCW +Chip_Configuration_GNSSConstConstraintDef = 0x60BF +LocTech_Constraints = 0x60BF Chip_Configuration_RfMiscCtrl = 0x80008001 ### 2C48 L1 only MCW ### @@ -171,18 +171,16 @@ GlueLayer_isReqDBHFromFwRefLoc=1 GlueLayer_isReqUBPFromPressureSensor=1 GlueLayer_IsMemsEnable=1 GlueLayer_MeasCorrCap=7 -Chip_Configuration_mems_data_Configuration=0x37 +Chip_Configuration_mems_data_Configuration=0x17 Chip_Configuration_FeatureCfg_ANDRD_MEAS_CORR_ENABLE=1 CP_LocTech_PrimaryConst=0 -CP_LocTech_Constraints=1 +CP_LocTech_Constraints=0x81 CP_LocTech_Requirements=0 UP_LocTech_PrimaryConst=0 UP_LocTech_Constraints=1 UP_LocTech_Requirements=0 SpotLogger_Allowed=0 -soft_dog=0 - NmeaBitmask=0x010003fff # force engine to use entire response time for emergency session; default 0 @@ -242,6 +240,7 @@ ENABLE_NLP_IN_AGNSS=1 ENABLE_LPP_HA_GAD_SHAPE=1 # VZW GNSS_CARRIER_ID=3 +ENABLE_CAPS_OTDOA=0 ENABLE_LPP_UP=1 ENABLE_LPPE_UP=3 SUPL_SSL_METHOD=TLSv1_2 diff --git a/location/tokay/user/gps.cfg b/location/tokay/user/gps.cfg index c738a867..439480ea 100644 --- a/location/tokay/user/gps.cfg +++ b/location/tokay/user/gps.cfg @@ -23,8 +23,8 @@ ChipCfg_VDR_low_end_Time = 20 Chip_Configuration_AidingConfiguration=0x00020046 Chip_Configuration_RefClkControl=0x24 Chip_Configuration_DCXO_CrystalType=0x11 -# L1 only, TODO: should remove below line to enable L5 back once b/329003269 fixed. -LocTech_Constraints = 0x603F +Chip_Configuration_GNSSConstConstraintDef = 0x60BF +LocTech_Constraints = 0x60BF Chip_Configuration_RfMiscCtrl = 0x80008001 bdsUsedInUSPolicy=2 sbasUsedInUSPolicy=2 @@ -47,20 +47,15 @@ GlueLayer_isReqDBHFromFwRefLoc=1 GlueLayer_isReqUBPFromPressureSensor=1 GlueLayer_IsMemsEnable=1 GlueLayer_MeasCorrCap=7 -Chip_Configuration_mems_data_Configuration=0x37 +Chip_Configuration_mems_data_Configuration=0x17 Chip_Configuration_FeatureCfg_ANDRD_MEAS_CORR_ENABLE=1 CP_LocTech_PrimaryConst=0 -CP_LocTech_Constraints=1 +CP_LocTech_Constraints=0x81 CP_LocTech_Requirements=0 UP_LocTech_PrimaryConst=0 UP_LocTech_Constraints=1 UP_LocTech_Requirements=0 SpotLogger_Allowed=0 -soft_dog=0 -path_delay_glo_12fx_cm=-5166,-5149,-5097,-5104,-5021,-4992,-4936,-4854,-4776,-4719,-4656,-4619,-4581,-4544 -path_delay_gps_2fx_cm=12368 -path_delay_bds_4fx_cm=164 -path_delay_l5_20fx_cm=105888 RfPathLossDb_Ap=3550 RfPathLossDb_Cp=3550 RfPathLossDb_L5_Ap=3870 @@ -112,6 +107,7 @@ ENABLE_NLP_IN_AGNSS=1 ENABLE_LPP_HA_GAD_SHAPE=1 GNSS_CARRIER_ID=3 +ENABLE_CAPS_OTDOA=0 ENABLE_LPP_UP=1 ENABLE_LPPE_UP=3 SUPL_SSL_METHOD=TLSv1_2 diff --git a/location/tokay/userdebug/gps.cfg b/location/tokay/userdebug/gps.cfg index 1ccf4135..81c1ff16 100644 --- a/location/tokay/userdebug/gps.cfg +++ b/location/tokay/userdebug/gps.cfg @@ -86,15 +86,15 @@ Chip_Configuration_RefClkControl=0x24 ## LOOK! S5400 ERD's uses NDK(2), Phones use Kyocera(1). Default set to phone (1) Chip_Configuration_DCXO_CrystalType=0x11 -# L1 only, TODO: should remove below line to enable L5 back once b/329003269 fixed. -LocTech_Constraints = 0x603F - ## Optionally specify DXCO Inflection point temperature, #### # This will override any default value or value in Crystal type #### # Value is degrees C x 100 E.g. 2855 = 28.55 deg C # Range should be 2000 to 3100 #Chip_Configuration_DCXO_InflectionPoint=2855 +# L1 + L5 MCW +Chip_Configuration_GNSSConstConstraintDef = 0x60BF +LocTech_Constraints = 0x60BF Chip_Configuration_RfMiscCtrl = 0x80008001 ### 2C48 L1 only MCW ### @@ -171,23 +171,16 @@ GlueLayer_isReqDBHFromFwRefLoc=1 GlueLayer_isReqUBPFromPressureSensor=1 GlueLayer_IsMemsEnable=1 GlueLayer_MeasCorrCap=7 -Chip_Configuration_mems_data_Configuration=0x37 +Chip_Configuration_mems_data_Configuration=0x17 Chip_Configuration_FeatureCfg_ANDRD_MEAS_CORR_ENABLE=1 CP_LocTech_PrimaryConst=0 -CP_LocTech_Constraints=1 +CP_LocTech_Constraints=0x81 CP_LocTech_Requirements=0 UP_LocTech_PrimaryConst=0 UP_LocTech_Constraints=1 UP_LocTech_Requirements=0 SpotLogger_Allowed=0 -soft_dog=0 - -path_delay_glo_12fx_cm=-5166,-5149,-5097,-5104,-5021,-4992,-4936,-4854,-4776,-4719,-4656,-4619,-4581,-4544 -path_delay_gps_2fx_cm=12368 -path_delay_bds_4fx_cm=164 -path_delay_l5_20fx_cm=105888 - RfPathLossDb_Ap=3550 RfPathLossDb_Cp=3550 RfPathLossDb_L5_Ap=3870 @@ -251,6 +244,7 @@ ENABLE_NLP_IN_AGNSS=1 ENABLE_LPP_HA_GAD_SHAPE=1 # VZW GNSS_CARRIER_ID=3 +ENABLE_CAPS_OTDOA=0 ENABLE_LPP_UP=1 ENABLE_LPPE_UP=3 SUPL_SSL_METHOD=TLSv1_2