Evolution-X-Tensor/device_google_caimito
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Migrate caimito devices into caimito folder from sha 31a6eb4c2ffbc

Browse source 
Bug: 291867277
Change-Id: Ia7d34e6ab34bdd03406391f98c58b04eb77671cd
This commit is contained in:
Robin Peng 2023-08-16 09:51:01 +00:00
parent f63ebdb758
commit b5194d9b24
307 changed files with 1405340 additions and 0 deletions
Download patch file Download diff file Expand all files Collapse all files

315
audio/ripcurrent24/cs35l41/crus_sp_cal_mixer_paths.xml Normal file
View file

@ -0,0 +1,315 @@
<?xml version="1.0" encoding="ISO-8859-1"?>
<!-- Copyright (c) 2018-2020, The Linux Foundation. All rights reserved. -->
<!-- -->
<!-- Redistribution and use in source and binary forms, with or without -->
<!-- modification, are permitted provided that the following conditions are -->
<!-- met: -->
<!-- * Redistributions of source code must retain the above copyright -->
<!-- notice, this list of conditions and the following disclaimer. -->
<!-- * Redistributions in binary form must reproduce the above -->
<!-- copyright notice, this list of conditions and the following -->
<!-- disclaimer in the documentation and/or other materials provided -->
<!-- with the distribution. -->
<!-- * Neither the name of The Linux Foundation nor the names of its -->
<!-- contributors may be used to endorse or promote products derived -->
<!-- from this software without specific prior written permission. -->
<!-- -->
<!-- THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED -->
<!-- WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -->
<!-- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT -->
<!-- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS -->
<!-- BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -->
<!-- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -->
<!-- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR -->
<!-- BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, -->
<!-- OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN -->
<!-- IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -->
<mixer>
<!-- Initial Values -->
<!-- Preload Stage -->
<ctl name="Main AMP Enable Switch" value="0" />
<ctl name="DSP1 Preload Switch" value="0" />
<ctl name="R Main AMP Enable Switch" value="0" />
<ctl name="R DSP1 Preload Switch" value="0" />
<!-- Clock-trigger Stage -->
<ctl name="SINK_IDS" id="0" value="-1"/>
<ctl name="SINK_IDS" id="1" value="-1"/>
<ctl name="PCM Playback Volume" value="10"/>
<ctl name="TDM_0_RX Mixer EP6" value="0"/>
<!-- Preparation Stage -->
<path name="crus-switch-fw-prepare">
<ctl name="DRE DRE Switch" value="1" />
<ctl name="VBSTMON Output Switch" value="1" />
<ctl name="DSP Booted" value="0" />
<ctl name="DSP1 Preload Switch" value="0" />
<ctl name="R DRE DRE Switch" value="1" />
<ctl name="R VBSTMON Output Switch" value="1" />
<ctl name="R DSP Booted" value="0" />
<ctl name="R DSP1 Preload Switch" value="0" />
</path>
<!-- Preload Stage -->
<path name="crus-fw-preload">
<ctl name="DSP1 Preload Switch" value="1" />
<ctl name="R DSP1 Preload Switch" value="1" />
</path>
<path name="crus-fw-preload-amp1">
<ctl name="DSP1 Preload Switch" value="1" />
</path>
<path name="crus-fw-preload-amp2">
<ctl name="R DSP1 Preload Switch" value="1" />
</path>
<!-- Firmware-switching Stage -->
<path name="crus-switch-fw-Calibration">
<ctl name="AMP PCM Gain" value="17" />
<ctl name="Digital PCM Volume" value="817" />
<ctl name="PCM Source" value="DSP" />
<ctl name="DSP1 Firmware" value="Calibration" />
<ctl name="R AMP PCM Gain" value="17" />
<ctl name="R Digital PCM Volume" value="817" />
<ctl name="R PCM Source" value="DSP" />
<ctl name="R DSP1 Firmware" value="Calibration" />
</path>
<path name="crus-switch-fw-Diagnostic">
<ctl name="AMP PCM Gain" value="17" />
<ctl name="Digital PCM Volume" value="817" />
<ctl name="PCM Source" value="DSP" />
<ctl name="DSP1 Firmware" value="Diagnostic" />
<ctl name="R AMP PCM Gain" value="17" />
<ctl name="R Digital PCM Volume" value="817" />
<ctl name="R PCM Source" value="DSP" />
<ctl name="R DSP1 Firmware" value="Diagnostic" />
</path>
<path name="crus-switch-fw-Protection">
<ctl name="PCM Source" value="DSP" />
<ctl name="DSP1 Firmware" value="Protection" />
<ctl name="R PCM Source" value="DSP" />
<ctl name="R DSP1 Firmware" value="Protection" />
</path>
<!-- DSP-initialization Stage -->
<path name="crus-dsp-pre-calibration-amp1">
<ctl name="Main AMP Enable Switch" value="1" />
</path>
<path name="crus-dsp-pre-calibration-amp2">
<ctl name="R Main AMP Enable Switch" value="1" />
</path>
<path name="crus-dsp-pre-calibration">
<path name="crus-dsp-pre-calibration-amp1" />
<path name="crus-dsp-pre-calibration-amp2" />
</path>
<path name="crus-dsp-pre-diagnostic-amp1">
<ctl name="Main AMP Enable Switch" value="1" />
</path>
<path name="crus-dsp-pre-diagnostic-amp2">
<ctl name="R Main AMP Enable Switch" value="1" />
</path>
<path name="crus-dsp-pre-diagnostic">
<path name="crus-dsp-pre-diagnostic-amp1" />
<path name="crus-dsp-pre-diagnostic-amp2" />
</path>
<path name="crus-dsp-pre-protection">
<ctl name="Main AMP Enable Switch" value="1" />
<ctl name="R Main AMP Enable Switch" value="1" />
</path>
<!-- Clock-trigger Stage -->
<path name="platform-controls">
<ctl name="PCM Playback Volume" value="1000"/>
<ctl name="SINK_IDS" id="0" value="0"/>
<ctl name="SINK_IDS" id="1" value="-1"/>
<ctl name="TDM_0_RX Mixer EP6" value="1"/>
</path>
<!-- Post loaded firmware -->
<path name="crus-dsp-post-loading-fw">
<ctl name="Main AMP Enable Switch" value="0" />
<ctl name="R Main AMP Enable Switch" value="0" />
</path>
<!-- Value & Information Fetch Stage -->
<path name="platform-values">
<ctl name="TDM_0_RX Format" />
<ctl name="TDM_0_RX Chan" />
<ctl name="TDM_0_RX Sample Rate" />
<ctl name="PCM Playback Volume" />
<ctl name="TDM_0_RX Mixer EP6" />
</path>
<path name="cs35l41-values">
<ctl name="DRE DRE Switch" />
<ctl name="R DRE DRE Switch" />
<ctl name="VBSTMON Output Switch" />
<ctl name="R VBSTMON Output Switch" />
<ctl name="AMP PCM Gain" />
<ctl name="R AMP PCM Gain" />
<ctl name="Digital PCM Volume" />
<ctl name="R Digital PCM Volume" />
<ctl name="PCM Source" />
<ctl name="R PCM Source" />
<ctl name="DSP Booted" />
<ctl name="R DSP Booted" />
<ctl name="Main AMP Enable Switch" />
<ctl name="R Main AMP Enable Switch" />
<ctl name="DSP1 Preload Switch" />
<ctl name="R DSP1 Preload Switch" />
<ctl name="DSP1 Firmware" />
<ctl name="R DSP1 Firmware" />
</path>
<!-- Note that the order of controls does matter because
it should be matched to the structure defined in
sp_cal_common.h -->
<!--
struct calibration_data {
unsigned int cal_r;
unsigned int cal_status;
unsigned int cal_checksum;
unsigned int cal_ambient;
unsigned int amp_pcm_gain;
unsigned int digital_pcm_gain;
};
-->
<path name="cs35l41-dsp-amp1-calibration-values">
<ctl name="DSP1 Calibration cd CAL_R" />
<ctl name="DSP1 Calibration cd CAL_STATUS" />
<ctl name="DSP1 Calibration cd CAL_CHECKSUM" />
<ctl name="DSP1 Calibration cd CAL_AMBIENT" />
<ctl name="AMP PCM Gain" />
<ctl name="Digital PCM Volume" />
<!-- Only for debug print -->
<ctl name="DSP1 Calibration cd CAL_SET_STATUS" />
</path>
<path name="cs35l41-dsp-amp2-calibration-values">
<ctl name="R DSP1 Calibration cd CAL_R" />
<ctl name="R DSP1 Calibration cd CAL_STATUS" />
<ctl name="R DSP1 Calibration cd CAL_CHECKSUM" />
<ctl name="R DSP1 Calibration cd CAL_AMBIENT" />
<ctl name="R AMP PCM Gain" />
<ctl name="R Digital PCM Volume" />
<!-- Only for debug print -->
<ctl name="R DSP1 Calibration cd CAL_SET_STATUS" />
</path>
<!--
struct diagnostic_data {
struct calibration_data calibration_data;
unsigned int z_low_diff;
unsigned int diag_f0;
unsigned int diag_f0_status;
};
-->
<path name="cs35l41-dsp-amp1-diagnostic-values">
<!-- struct calibration_data START -->
<ctl name="DSP1 Diagnostic cd CAL_R" />
<ctl name="DSP1 Diagnostic cd CAL_STATUS" />
<ctl name="DSP1 Diagnostic cd CAL_CHECKSUM" />
<ctl name="DSP1 Diagnostic cd CAL_AMBIENT" />
<ctl name="AMP PCM Gain" />
<ctl name="Digital PCM Volume" />
<!-- struct calibration_data END -->
<ctl name="DSP1 Diagnostic cd DIAG_Z_LOW_DIFF" />
<ctl name="DSP1 Diagnostic cd DIAG_F0" />
<ctl name="DSP1 Diagnostic cd DIAG_F0_STATUS" />
<!-- Only for debug print -->
<ctl name="DSP1 Diagnostic cd CAL_SET_STATUS" />
</path>
<path name="cs35l41-dsp-amp2-diagnostic-values">
<!-- struct calibration_data START -->
<ctl name="R DSP1 Diagnostic cd CAL_R" />
<ctl name="R DSP1 Diagnostic cd CAL_STATUS" />
<ctl name="R DSP1 Diagnostic cd CAL_CHECKSUM" />
<ctl name="R DSP1 Diagnostic cd CAL_AMBIENT" />
<ctl name="R AMP PCM Gain" />
<ctl name="R Digital PCM Volume" />
<!-- struct calibration_data END -->
<ctl name="R DSP1 Diagnostic cd DIAG_Z_LOW_DIFF" />
<ctl name="R DSP1 Diagnostic cd DIAG_F0" />
<ctl name="R DSP1 Diagnostic cd DIAG_F0_STATUS" />
<!-- Only for debug print -->
<ctl name="R DSP1 Diagnostic cd CAL_SET_STATUS" />
</path>
<path name="cs35l41-dsp-amp1-protection-values">
<!-- struct calibration_data START -->
<ctl name="DSP1 Protection cd CAL_R" />
<ctl name="DSP1 Protection cd CAL_STATUS" />
<ctl name="DSP1 Protection cd CAL_CHECKSUM" />
<ctl name="DSP1 Protection cd CAL_AMBIENT" />
<!-- These controls are unrelated so we can simply
skip them
<ctl name="AMP PCM Gain" />
<ctl name="Digital PCM Volume" />
-->
<!-- struct calibration_data END -->
</path>
<path name="cs35l41-dsp-amp2-protection-values">
<!-- struct calibration_data START -->
<ctl name="R DSP1 Protection cd CAL_R" />
<ctl name="R DSP1 Protection cd CAL_STATUS" />
<ctl name="R DSP1 Protection cd CAL_CHECKSUM" />
<ctl name="R DSP1 Protection cd CAL_AMBIENT" />
<!-- These controls are unrelated so we can simply
skip them
<ctl name="R AMP PCM Gain" />
<ctl name="R Digital PCM Volume" />
-->
<!-- struct calibration_data END -->
</path>
<path name="cs35l41-dsp-amp1-calibration-completion">
<ctl name="DSP1 Calibration cd CAL_STATUS" />
</path>
<path name="cs35l41-dsp-amp2-calibration-completion">
<ctl name="R DSP1 Calibration cd CAL_STATUS" />
</path>
<path name="cs35l41-dsp-amp1-protection-completion">
<ctl name="DSP1 Protection cd CAL_SET_STATUS" />
</path>
<path name="cs35l41-dsp-amp2-protection-completion">
<ctl name="R DSP1 Protection cd CAL_SET_STATUS" />
</path>
<path name="cs35l41-dsp-amp1-diagnostic-completion">
<ctl name="DSP1 Diagnostic cd CAL_STATUS" />
<ctl name="DSP1 Diagnostic cd DIAG_F0_STATUS" />
</path>
<path name="cs35l41-dsp-amp2-diagnostic-completion">
<ctl name="R DSP1 Diagnostic cd CAL_STATUS" />
<ctl name="R DSP1 Diagnostic cd DIAG_F0_STATUS" />
</path>
<path name="cs35l41-dsp-amp1-enable-status">
<ctl name="Main AMP Enable Switch" />
</path>
<path name="cs35l41-dsp-amp2-enable-status">
<ctl name="R Main AMP Enable Switch" />
</path>
</mixer>

BIN
audio/ripcurrent24/cs35l41/fw/R-cs35l41-dsp1-spk-cali.bin Normal file
View file

Binary file not shown.

BIN
audio/ripcurrent24/cs35l41/fw/R-cs35l41-dsp1-spk-diag.bin Normal file
View file

Binary file not shown.

BIN
audio/ripcurrent24/cs35l41/fw/R-cs35l41-dsp1-spk-prot.bin Normal file
View file

Binary file not shown.

BIN
audio/ripcurrent24/cs35l41/fw/cs35l41-dsp1-spk-cali.bin Normal file
View file

Binary file not shown.

BIN
audio/ripcurrent24/cs35l41/fw/cs35l41-dsp1-spk-cali.wmfw Normal file
View file

Binary file not shown.

BIN
audio/ripcurrent24/cs35l41/fw/cs35l41-dsp1-spk-diag.bin Normal file
View file

Binary file not shown.

BIN
audio/ripcurrent24/cs35l41/fw/cs35l41-dsp1-spk-diag.wmfw Normal file
View file

Binary file not shown.

BIN
audio/ripcurrent24/cs35l41/fw/cs35l41-dsp1-spk-prot.bin Normal file
View file

Binary file not shown.

BIN
audio/ripcurrent24/cs35l41/fw/cs35l41-dsp1-spk-prot.wmfw Normal file
View file

Binary file not shown.