Evolution-X-Tensor/device_google_caimito
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Merge "gps: Updae gnss FW 4.15.1_4 + config for P24" into 24D1-dev

Browse source
This commit is contained in:
Treehugger Robot 2024-04-15 15:35:55 +00:00 • committed by Android (Google) Code Review
commit c13a499eb4
10 changed files with 56 additions and 87 deletions
Download patch file Download diff file Expand all files Collapse all files

14
location/caiman/user/gps.cfg
View file

@ -23,8 +23,8 @@ ChipCfg_VDR_low_end_Time = 20
Chip_Configuration_AidingConfiguration=0x00020046
Chip_Configuration_RefClkControl=0x24
Chip_Configuration_DCXO_CrystalType=0x11
# L1 only, TODO: should remove below line to enable L5 back once b/329003269 fixed.
LocTech_Constraints = 0x603F
Chip_Configuration_GNSSConstConstraintDef = 0x60BF
LocTech_Constraints = 0x60BF
Chip_Configuration_RfMiscCtrl = 0x80008001
bdsUsedInUSPolicy=2
sbasUsedInUSPolicy=2
@ -47,20 +47,15 @@ GlueLayer_isReqDBHFromFwRefLoc=1
GlueLayer_isReqUBPFromPressureSensor=1
GlueLayer_IsMemsEnable=1
GlueLayer_MeasCorrCap=7
Chip_Configuration_mems_data_Configuration=0x37
Chip_Configuration_mems_data_Configuration=0x17
Chip_Configuration_FeatureCfg_ANDRD_MEAS_CORR_ENABLE=1
CP_LocTech_PrimaryConst=0
CP_LocTech_Constraints=1
CP_LocTech_Constraints=0x81
CP_LocTech_Requirements=0
UP_LocTech_PrimaryConst=0
UP_LocTech_Constraints=1
UP_LocTech_Requirements=0
SpotLogger_Allowed=0
soft_dog=0
path_delay_glo_12fx_cm=-5076,-5076,-5064,-5022,-4982,-4916,-4879,-4800,-4704,-4647,-4628,-4573,-4522,-4493
path_delay_gps_2fx_cm=12371
path_delay_bds_4fx_cm=123
path_delay_l5_20fx_cm=105888
RfPathLossDb_Ap=3210
RfPathLossDb_Cp=3210
RfPathLossDb_L5_Ap=4450
@ -112,6 +107,7 @@ ENABLE_NLP_IN_AGNSS=1
ENABLE_LPP_HA_GAD_SHAPE=1
GNSS_CARRIER_ID=3
ENABLE_CAPS_OTDOA=0
ENABLE_LPP_UP=1
ENABLE_LPPE_UP=3
SUPL_SSL_METHOD=TLSv1_2

18
location/caiman/userdebug/gps.cfg
View file

@ -86,15 +86,15 @@ Chip_Configuration_RefClkControl=0x24
## LOOK! S5400 ERD's uses NDK(2), Phones use Kyocera(1). Default set to phone (1)
Chip_Configuration_DCXO_CrystalType=0x11
# L1 only, TODO: should remove below line to enable L5 back once b/329003269 fixed.
LocTech_Constraints = 0x603F
## Optionally specify DXCO Inflection point temperature, ####
# This will override any default value or value in Crystal type ####
# Value is degrees C x 100 E.g. 2855 = 28.55 deg C
# Range should be 2000 to 3100
#Chip_Configuration_DCXO_InflectionPoint=2855
# L1 + L5 MCW
Chip_Configuration_GNSSConstConstraintDef = 0x60BF
LocTech_Constraints = 0x60BF
Chip_Configuration_RfMiscCtrl = 0x80008001
### 2C48 L1 only MCW ###
@ -171,23 +171,16 @@ GlueLayer_isReqDBHFromFwRefLoc=1
GlueLayer_isReqUBPFromPressureSensor=1
GlueLayer_IsMemsEnable=1
GlueLayer_MeasCorrCap=7
Chip_Configuration_mems_data_Configuration=0x37
Chip_Configuration_mems_data_Configuration=0x17
Chip_Configuration_FeatureCfg_ANDRD_MEAS_CORR_ENABLE=1
CP_LocTech_PrimaryConst=0
CP_LocTech_Constraints=1
CP_LocTech_Constraints=0x81
CP_LocTech_Requirements=0
UP_LocTech_PrimaryConst=0
UP_LocTech_Constraints=1
UP_LocTech_Requirements=0
SpotLogger_Allowed=0
soft_dog=0
path_delay_glo_12fx_cm=-5076,-5076,-5064,-5022,-4982,-4916,-4879,-4800,-4704,-4647,-4628,-4573,-4522,-4493
path_delay_gps_2fx_cm=12371
path_delay_bds_4fx_cm=123
path_delay_l5_20fx_cm=105888
RfPathLossDb_Ap=3210
RfPathLossDb_Cp=3210
RfPathLossDb_L5_Ap=4450
@ -251,6 +244,7 @@ ENABLE_NLP_IN_AGNSS=1
ENABLE_LPP_HA_GAD_SHAPE=1
# VZW
GNSS_CARRIER_ID=3
ENABLE_CAPS_OTDOA=0
ENABLE_LPP_UP=1
ENABLE_LPPE_UP=3
SUPL_SSL_METHOD=TLSv1_2

14
location/komodo/user/gps.cfg
View file

@ -23,8 +23,8 @@ ChipCfg_VDR_low_end_Time = 20
Chip_Configuration_AidingConfiguration=0x00020046
Chip_Configuration_RefClkControl=0x24
Chip_Configuration_DCXO_CrystalType=0x11
# L1 only, TODO: should remove below line to enable L5 back once b/329003269 fixed.
LocTech_Constraints = 0x603F
Chip_Configuration_GNSSConstConstraintDef = 0x60BF
LocTech_Constraints = 0x60BF
Chip_Configuration_RfMiscCtrl = 0x80008001
bdsUsedInUSPolicy=2
sbasUsedInUSPolicy=2
@ -47,20 +47,15 @@ GlueLayer_isReqDBHFromFwRefLoc=1
GlueLayer_isReqUBPFromPressureSensor=1
GlueLayer_IsMemsEnable=1
GlueLayer_MeasCorrCap=7
Chip_Configuration_mems_data_Configuration=0x37
Chip_Configuration_mems_data_Configuration=0x17
Chip_Configuration_FeatureCfg_ANDRD_MEAS_CORR_ENABLE=1
CP_LocTech_PrimaryConst=0
CP_LocTech_Constraints=1
CP_LocTech_Constraints=0x81
CP_LocTech_Requirements=0
UP_LocTech_PrimaryConst=0
UP_LocTech_Constraints=1
UP_LocTech_Requirements=0
SpotLogger_Allowed=0
soft_dog=0
path_delay_glo_12fx_cm=-5185,-5158,-5112,-5111,-5031,-4972,-4900,-4823,-4765,-4714,-4625,-4613,-4553,-4553
path_delay_gps_2fx_cm=12378
path_delay_bds_4fx_cm=168
path_delay_l5_20fx_cm=105902
RfPathLossDb_Ap=3520
RfPathLossDb_Cp=3520
RfPathLossDb_L5_Ap=3700
@ -112,6 +107,7 @@ ENABLE_NLP_IN_AGNSS=1
ENABLE_LPP_HA_GAD_SHAPE=1
GNSS_CARRIER_ID=3
ENABLE_CAPS_OTDOA=0
ENABLE_LPP_UP=1
ENABLE_LPPE_UP=3
SUPL_SSL_METHOD=TLSv1_2

18
location/komodo/userdebug/gps.cfg
View file

@ -86,15 +86,15 @@ Chip_Configuration_RefClkControl=0x24
## LOOK! S5400 ERD's uses NDK(2), Phones use Kyocera(1). Default set to phone (1)
Chip_Configuration_DCXO_CrystalType=0x11
# L1 only, TODO: should remove below line to enable L5 back once b/329003269 fixed.
LocTech_Constraints = 0x603F
## Optionally specify DXCO Inflection point temperature, ####
# This will override any default value or value in Crystal type ####
# Value is degrees C x 100 E.g. 2855 = 28.55 deg C
# Range should be 2000 to 3100
#Chip_Configuration_DCXO_InflectionPoint=2855
# L1 + L5 MCW
Chip_Configuration_GNSSConstConstraintDef = 0x60BF
LocTech_Constraints = 0x60BF
Chip_Configuration_RfMiscCtrl = 0x80008001
### 2C48 L1 only MCW ###
@ -171,23 +171,16 @@ GlueLayer_isReqDBHFromFwRefLoc=1
GlueLayer_isReqUBPFromPressureSensor=1
GlueLayer_IsMemsEnable=1
GlueLayer_MeasCorrCap=7
Chip_Configuration_mems_data_Configuration=0x37
Chip_Configuration_mems_data_Configuration=0x17
Chip_Configuration_FeatureCfg_ANDRD_MEAS_CORR_ENABLE=1
CP_LocTech_PrimaryConst=0
CP_LocTech_Constraints=1
CP_LocTech_Constraints=0x81
CP_LocTech_Requirements=0
UP_LocTech_PrimaryConst=0
UP_LocTech_Constraints=1
UP_LocTech_Requirements=0
SpotLogger_Allowed=0
soft_dog=0
path_delay_glo_12fx_cm=-5185,-5158,-5112,-5111,-5031,-4972,-4900,-4823,-4765,-4714,-4625,-4613,-4553,-4553
path_delay_gps_2fx_cm=12378
path_delay_bds_4fx_cm=168
path_delay_l5_20fx_cm=105902
RfPathLossDb_Ap=3520
RfPathLossDb_Cp=3520
RfPathLossDb_L5_Ap=3700
@ -251,6 +244,7 @@ ENABLE_NLP_IN_AGNSS=1
ENABLE_LPP_HA_GAD_SHAPE=1
# VZW
GNSS_CARRIER_ID=3
ENABLE_CAPS_OTDOA=0
ENABLE_LPP_UP=1
ENABLE_LPPE_UP=3
SUPL_SSL_METHOD=TLSv1_2

11
location/ripcurrent24/user/gps.cfg
View file

@ -23,8 +23,8 @@ ChipCfg_VDR_low_end_Time = 20
Chip_Configuration_AidingConfiguration=0x00020046
Chip_Configuration_RefClkControl=0x24
Chip_Configuration_DCXO_CrystalType=0x11
# L1 only, TODO: should remove below line to enable L5 back once b/329003269 fixed.
LocTech_Constraints = 0x603F
Chip_Configuration_GNSSConstConstraintDef = 0x60BF
LocTech_Constraints = 0x60BF
Chip_Configuration_RfMiscCtrl = 0x80008001
bdsUsedInUSPolicy=2
sbasUsedInUSPolicy=2
@ -47,18 +47,18 @@ GlueLayer_isReqDBHFromFwRefLoc=1
GlueLayer_isReqUBPFromPressureSensor=1
GlueLayer_IsMemsEnable=1
GlueLayer_MeasCorrCap=7
Chip_Configuration_mems_data_Configuration=0x37
Chip_Configuration_mems_data_Configuration=0x17
Chip_Configuration_FeatureCfg_ANDRD_MEAS_CORR_ENABLE=1
CP_LocTech_PrimaryConst=0
CP_LocTech_Constraints=1
CP_LocTech_Constraints=0x81
CP_LocTech_Requirements=0
UP_LocTech_PrimaryConst=0
UP_LocTech_Constraints=1
UP_LocTech_Requirements=0
SpotLogger_Allowed=0
soft_dog=0
IsUseEntireRespTime911=1
isForceHighAccuracyMode=1
cp_partial_reset_disable=1
isUseUncalAccel=1
GNSS_CARRIER_CONFIG_BEGIN
@ -103,6 +103,7 @@ ENABLE_NLP_IN_AGNSS=1
ENABLE_LPP_HA_GAD_SHAPE=1
GNSS_CARRIER_ID=3
ENABLE_CAPS_OTDOA=0
ENABLE_LPP_UP=1
ENABLE_LPPE_UP=3
SUPL_SSL_METHOD=TLSv1_2

13
location/ripcurrent24/userdebug/gps.cfg
View file

@ -86,15 +86,15 @@ Chip_Configuration_RefClkControl=0x24
## LOOK! S5400 ERD's uses NDK(2), Phones use Kyocera(1). Default set to phone (1)
Chip_Configuration_DCXO_CrystalType=0x11
# L1 only, TODO: should remove below line to enable L5 back once b/329003269 fixed.
LocTech_Constraints = 0x603F
## Optionally specify DXCO Inflection point temperature, ####
# This will override any default value or value in Crystal type ####
# Value is degrees C x 100 E.g. 2855 = 28.55 deg C
# Range should be 2000 to 3100
#Chip_Configuration_DCXO_InflectionPoint=2855
# L1 + L5 MCW
Chip_Configuration_GNSSConstConstraintDef = 0x60BF
LocTech_Constraints = 0x60BF
Chip_Configuration_RfMiscCtrl = 0x80008001
### 2C48 L1 only MCW ###
@ -171,18 +171,16 @@ GlueLayer_isReqDBHFromFwRefLoc=1
GlueLayer_isReqUBPFromPressureSensor=1
GlueLayer_IsMemsEnable=1
GlueLayer_MeasCorrCap=7
Chip_Configuration_mems_data_Configuration=0x37
Chip_Configuration_mems_data_Configuration=0x17
Chip_Configuration_FeatureCfg_ANDRD_MEAS_CORR_ENABLE=1
CP_LocTech_PrimaryConst=0
CP_LocTech_Constraints=1
CP_LocTech_Constraints=0x81
CP_LocTech_Requirements=0
UP_LocTech_PrimaryConst=0
UP_LocTech_Constraints=1
UP_LocTech_Requirements=0
SpotLogger_Allowed=0
soft_dog=0
NmeaBitmask=0x010003fff
# force engine to use entire response time for emergency session; default 0
@ -242,6 +240,7 @@ ENABLE_NLP_IN_AGNSS=1
ENABLE_LPP_HA_GAD_SHAPE=1
# VZW
GNSS_CARRIER_ID=3
ENABLE_CAPS_OTDOA=0
ENABLE_LPP_UP=1
ENABLE_LPPE_UP=3
SUPL_SSL_METHOD=TLSv1_2

10
location/ripcurrentpro/user/gps.cfg
View file

@ -23,8 +23,8 @@ ChipCfg_VDR_low_end_Time = 20
Chip_Configuration_AidingConfiguration=0x00020046
Chip_Configuration_RefClkControl=0x24
Chip_Configuration_DCXO_CrystalType=0x11
# L1 only, TODO: should remove below line to enable L5 back once b/329003269 fixed.
LocTech_Constraints = 0x603F
Chip_Configuration_GNSSConstConstraintDef = 0x60BF
LocTech_Constraints = 0x60BF
Chip_Configuration_RfMiscCtrl = 0x80008001
bdsUsedInUSPolicy=2
sbasUsedInUSPolicy=2
@ -47,16 +47,15 @@ GlueLayer_isReqDBHFromFwRefLoc=1
GlueLayer_isReqUBPFromPressureSensor=1
GlueLayer_IsMemsEnable=1
GlueLayer_MeasCorrCap=7
Chip_Configuration_mems_data_Configuration=0x37
Chip_Configuration_mems_data_Configuration=0x17
Chip_Configuration_FeatureCfg_ANDRD_MEAS_CORR_ENABLE=1
CP_LocTech_PrimaryConst=0
CP_LocTech_Constraints=1
CP_LocTech_Constraints=0x81
CP_LocTech_Requirements=0
UP_LocTech_PrimaryConst=0
UP_LocTech_Constraints=1
UP_LocTech_Requirements=0
SpotLogger_Allowed=0
soft_dog=0
IsUseEntireRespTime911=1
isForceHighAccuracyMode=1
cp_partial_reset_disable=1
@ -104,6 +103,7 @@ ENABLE_NLP_IN_AGNSS=1
ENABLE_LPP_HA_GAD_SHAPE=1
GNSS_CARRIER_ID=3
ENABLE_CAPS_OTDOA=0
ENABLE_LPP_UP=1
ENABLE_LPPE_UP=3
SUPL_SSL_METHOD=TLSv1_2

13
location/ripcurrentpro/userdebug/gps.cfg
View file

@ -86,15 +86,15 @@ Chip_Configuration_RefClkControl=0x24
## LOOK! S5400 ERD's uses NDK(2), Phones use Kyocera(1). Default set to phone (1)
Chip_Configuration_DCXO_CrystalType=0x11
# L1 only, TODO: should remove below line to enable L5 back once b/329003269 fixed.
LocTech_Constraints = 0x603F
## Optionally specify DXCO Inflection point temperature, ####
# This will override any default value or value in Crystal type ####
# Value is degrees C x 100 E.g. 2855 = 28.55 deg C
# Range should be 2000 to 3100
#Chip_Configuration_DCXO_InflectionPoint=2855
# L1 + L5 MCW
Chip_Configuration_GNSSConstConstraintDef = 0x60BF
LocTech_Constraints = 0x60BF
Chip_Configuration_RfMiscCtrl = 0x80008001
### 2C48 L1 only MCW ###
@ -171,18 +171,16 @@ GlueLayer_isReqDBHFromFwRefLoc=1
GlueLayer_isReqUBPFromPressureSensor=1
GlueLayer_IsMemsEnable=1
GlueLayer_MeasCorrCap=7
Chip_Configuration_mems_data_Configuration=0x37
Chip_Configuration_mems_data_Configuration=0x17
Chip_Configuration_FeatureCfg_ANDRD_MEAS_CORR_ENABLE=1
CP_LocTech_PrimaryConst=0
CP_LocTech_Constraints=1
CP_LocTech_Constraints=0x81
CP_LocTech_Requirements=0
UP_LocTech_PrimaryConst=0
UP_LocTech_Constraints=1
UP_LocTech_Requirements=0
SpotLogger_Allowed=0
soft_dog=0
NmeaBitmask=0x010003fff
# force engine to use entire response time for emergency session; default 0
@ -242,6 +240,7 @@ ENABLE_NLP_IN_AGNSS=1
ENABLE_LPP_HA_GAD_SHAPE=1
# VZW
GNSS_CARRIER_ID=3
ENABLE_CAPS_OTDOA=0
ENABLE_LPP_UP=1
ENABLE_LPPE_UP=3
SUPL_SSL_METHOD=TLSv1_2

14
location/tokay/user/gps.cfg
View file

@ -23,8 +23,8 @@ ChipCfg_VDR_low_end_Time = 20
Chip_Configuration_AidingConfiguration=0x00020046
Chip_Configuration_RefClkControl=0x24
Chip_Configuration_DCXO_CrystalType=0x11
# L1 only, TODO: should remove below line to enable L5 back once b/329003269 fixed.
LocTech_Constraints = 0x603F
Chip_Configuration_GNSSConstConstraintDef = 0x60BF
LocTech_Constraints = 0x60BF
Chip_Configuration_RfMiscCtrl = 0x80008001
bdsUsedInUSPolicy=2
sbasUsedInUSPolicy=2
@ -47,20 +47,15 @@ GlueLayer_isReqDBHFromFwRefLoc=1
GlueLayer_isReqUBPFromPressureSensor=1
GlueLayer_IsMemsEnable=1
GlueLayer_MeasCorrCap=7
Chip_Configuration_mems_data_Configuration=0x37
Chip_Configuration_mems_data_Configuration=0x17
Chip_Configuration_FeatureCfg_ANDRD_MEAS_CORR_ENABLE=1
CP_LocTech_PrimaryConst=0
CP_LocTech_Constraints=1
CP_LocTech_Constraints=0x81
CP_LocTech_Requirements=0
UP_LocTech_PrimaryConst=0
UP_LocTech_Constraints=1
UP_LocTech_Requirements=0
SpotLogger_Allowed=0
soft_dog=0
path_delay_glo_12fx_cm=-5166,-5149,-5097,-5104,-5021,-4992,-4936,-4854,-4776,-4719,-4656,-4619,-4581,-4544
path_delay_gps_2fx_cm=12368
path_delay_bds_4fx_cm=164
path_delay_l5_20fx_cm=105888
RfPathLossDb_Ap=3550
RfPathLossDb_Cp=3550
RfPathLossDb_L5_Ap=3870
@ -112,6 +107,7 @@ ENABLE_NLP_IN_AGNSS=1
ENABLE_LPP_HA_GAD_SHAPE=1
GNSS_CARRIER_ID=3
ENABLE_CAPS_OTDOA=0
ENABLE_LPP_UP=1
ENABLE_LPPE_UP=3
SUPL_SSL_METHOD=TLSv1_2

18
location/tokay/userdebug/gps.cfg
View file

@ -86,15 +86,15 @@ Chip_Configuration_RefClkControl=0x24
## LOOK! S5400 ERD's uses NDK(2), Phones use Kyocera(1). Default set to phone (1)
Chip_Configuration_DCXO_CrystalType=0x11
# L1 only, TODO: should remove below line to enable L5 back once b/329003269 fixed.
LocTech_Constraints = 0x603F
## Optionally specify DXCO Inflection point temperature, ####
# This will override any default value or value in Crystal type ####
# Value is degrees C x 100 E.g. 2855 = 28.55 deg C
# Range should be 2000 to 3100
#Chip_Configuration_DCXO_InflectionPoint=2855
# L1 + L5 MCW
Chip_Configuration_GNSSConstConstraintDef = 0x60BF
LocTech_Constraints = 0x60BF
Chip_Configuration_RfMiscCtrl = 0x80008001
### 2C48 L1 only MCW ###
@ -171,23 +171,16 @@ GlueLayer_isReqDBHFromFwRefLoc=1
GlueLayer_isReqUBPFromPressureSensor=1
GlueLayer_IsMemsEnable=1
GlueLayer_MeasCorrCap=7
Chip_Configuration_mems_data_Configuration=0x37
Chip_Configuration_mems_data_Configuration=0x17
Chip_Configuration_FeatureCfg_ANDRD_MEAS_CORR_ENABLE=1
CP_LocTech_PrimaryConst=0
CP_LocTech_Constraints=1
CP_LocTech_Constraints=0x81
CP_LocTech_Requirements=0
UP_LocTech_PrimaryConst=0
UP_LocTech_Constraints=1
UP_LocTech_Requirements=0
SpotLogger_Allowed=0
soft_dog=0
path_delay_glo_12fx_cm=-5166,-5149,-5097,-5104,-5021,-4992,-4936,-4854,-4776,-4719,-4656,-4619,-4581,-4544
path_delay_gps_2fx_cm=12368
path_delay_bds_4fx_cm=164
path_delay_l5_20fx_cm=105888
RfPathLossDb_Ap=3550
RfPathLossDb_Cp=3550
RfPathLossDb_L5_Ap=3870
@ -251,6 +244,7 @@ ENABLE_NLP_IN_AGNSS=1
ENABLE_LPP_HA_GAD_SHAPE=1
# VZW
GNSS_CARRIER_ID=3
ENABLE_CAPS_OTDOA=0
ENABLE_LPP_UP=1
ENABLE_LPPE_UP=3
SUPL_SSL_METHOD=TLSv1_2