<change list>
TK4:
-HA/HH/HE/BT
1. index 397 short term change to 0x8001 for adaptive NS off
CM4:
-HA/HH/HE/BT
1. index 397 short term change to 0x8001 for adaptive NS off
HH(Duncan)
WB/SWB RX max vol EQ for distortion pass
HA(Duncan)
Update NS tuning for SWB noisy environment sound quality issue
KM4:
-HA/HH/HE/BT
1. index 397 short term change to 0x8001 for adaptive NS off
Bug: 328329355
Test: Verified by Acoustic team
Change-Id: I4533916ea0c28540543e5334d51f4145241176e7
Signed-off-by: Jason Hsu <jasonchhsu@google.com>
<change list>
TK4
- Handset (Ricky)
1. HAWB Modify TdDRC expander as short term for BWE noise issue on (max to max-2)
- Handsfree (Ricky)
1. HHSWB fine tune (max-1 to min) for EVT1.1
2. HHWB fine tune for EVT1.1
TX/RX: PreEQ, TdDRC, EQ
- Headset (Gene)
1. HE WB: Mitigate the NB call RX noise after speech due to noise from NW and boosted by BWE.
2. HE WB: Enable 120Hz HFP for both TX and RX
3. HE WB Rx FNS level from 0x0006 to 0x000F for CCA BWE
- BT (Gene)
1. BTWB and BTWB_NREC WB Rx FNS level from 0x0006 to 0x000F for CCA BWE
CM4
- Headset (Gene)
1. HE WB: Mitigate the NB call RX noise after speech due to noise from NW and boosted by BWE.
2. HE WB: Enable 120Hz HFP for both TX and RX
3. HE WB Rx FNS level from 0x0006 to 0x000F for CCA BWE
- BT (Gene)
1. BTWB and BTWB_NREC WB Rx FNS level from 0x0006 to 0x000F for CCA BWE
KM4
- Headset (Gene)
1. HE WB: Mitigate the NB call RX noise after speech due to noise from NW and boosted by BWE.
2. HE WB: Enable 120Hz HFP for both TX and RX
3. HE WB Rx FNS level from 0x0006 to 0x000F for CCA BWE
Bug: 327555914
Test: Verified by Acoustic team
Change-Id: I2939312348ac6d9a13ac4be86460d49839b545ca
Signed-off-by: Carter Hsu <carterhsu@google.com>
(cherry picked from commit 2678747eae)
note:
Depending the realized in framework side, the microhone
information only report the corresponding devices info
surfaced via SDK. That means reporting bottom / back mic
are necessary.
Test: atest VtsHalAudioCoreTargetTest
Bug: 300735639
Change-Id: Ib514d1f87f607d1bfab0818dbff16bd3623b313e
Change list ver 4.0 for EVT 1.1 :
1. Spatial audio calibration for EVT 1.1
2. MIC path IIR
3. PGC update parameters based on rms-baed calculation
4. update template.xml with SNS(off) on MIC
Bug: 324162417
Bug: 324162415
Bug: 324160489
Change-Id: Ic3ce060a0a478183ac8440f8da0a7b88170f1065
Signed-off-by: vincenttew <vincenttew@google.com>
<changelist- FM table>
"TK4
- Handset (Ricky)
1. HA all BWs Disable AMS
2. HA WB Rx FNS level from 0x0006 to 0x000F for CCA BWE
- Handsfree (Ricky)
1. HH all BWs Disable AMS
2. HH WB Rx FNS level from 0x0006 to 0x000F for CCA BWE
3. HH all BWs Adaptive NS thd (index397) set to 0x0190
4. HH all BWs Disable LPF
- Headset (Gene)
1. HE WB Rx FNS level from 0x0006 to 0x000F for CCA BWE
KM4
- Handset (Ricky)
1. HA all BWs Disable AMS
2. HA WB Rx FNS level from 0x0006 to 0x000F for CCA BWE
- Handsfree (Ricky)
1. HH all BWs Disable AMS
2. HH WB Rx FNS level from 0x0006 to 0x000F for CCA BWE
3. HH all BWs Adaptive NS thd (index397) set to 0x0190
4. HH all BWs Disable LPF
- Headset (Gene)
1. HE WB Rx FNS level from 0x0006 to 0x000F for CCA BWE
CM4
- Handset (Duncan)
1. HA all BWs Disable AMS
2. HA WB Rx FNS level from 0x0006 to 0x000F for CCA BWE
- Handsfree (Duncan)
1. HH all BWs Disable AMS
2. HH WB Rx FNS level from 0x0006 to 0x000F for CCA BWE
- Headset (Gene)
1. HE WB Rx FNS level from 0x0006 to 0x000F for CCA BWE"
<change list - audio platform>
Enable stereo for BT VoIP
Bug: 323464302
Test: Verified by Acoustic team
Change-Id: I486d589eca68108a82dc071bb68a57fc39222eef
Signed-off-by: Carter Hsu <carterhsu@google.com>
- remove VOICE_RECOGNITION source for spatial capture
- move Mic Spatial Module Enable to audio hal control
Bug: 322926141
Test: manual test - camcorder/voice record with bluenote
Change-Id: I5057762e172ca35367a1929c67f3d364feece00c
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Update recording.gatf for SNS params since remove linear gain value
Update template.xml for CHRE part
[Details]
1. update SNS tuning parameters for EVT 1.0 device because of gain removal in front.
2. remove one line in template.xml for CHRE part
<param id="297" name="chre_gain" type="uint32"/>
Bug: 322446230
Bug: 322446226
Bug: 322445774
Test: verify by darrenyen@
Change-Id: I8554d65538200be288ad74a37d488fe9fbc19bbe
Signed-off-by: yixuanjiang <yixuanjiang@google.com>
note: - The old tuning file has deprecated commands which removed
from firmware already. That would casue gtest failure.
Bug: 322291792
Test: run aoc_sound_trigger_adapter_test and verify the value from
aoc interface.
Change-Id: I5a332f271cdfa5ec5dcf6c6c45b077ba447da18d
- add controls
"HAC AMP EN",
"EP5 TX Mixer INTERNAL_MIC_US_TX"
"BUILDIN US MIC ID CAPTURE LIST"
- add paths
"builtin-mic-id-capture-list"
"microphones (UNPROCESSED)"
"back-microphones (UNPROCESSED)"
"ultrasound-microphones"
- move the mic id list to a path and other microphones devices use the
path.
Bug: 301535551
Test: manually test
Change-Id: I669e69774fc90577ba1a056ec4ca36a25196fcf7
[Details]
1. update SUR tuning parameters for EVT 1.0 device and using AZ2.1 format.
2. manual fill-in Mic COMP EQ in IIR1 module before Mic COMP ON
3. update PGC template and syne with the latest parameters
Bug: 321164880
Bug: 321164128
Bug: 321164775
verify: HW wjacky
Change-Id: I1375b75570d7aa837d000324059339b282f2bf41
Signed-off-by: yixuanjiang <yixuanjiang@google.com>
Bug: 314707600
Test: manual test - making phone call and check log
Change-Id: I4d11bf1ed8db3604843ff79cb5775a292a0da1aa
Signed-off-by: Jasmine Cha <chajasmine@google.com>
<Change list:>
KM4 (Owen)
- Handset mode
1. Tx NB/WB/SWB DRC/EQ and Rx NB_EQDRC/WBSWB_DRC in Voice_Generic for SLR/SFR
2. Tx NS NB/WB/SWB tuning settings 1228v2/v2/v1 in Voice_Generic for 3QUEST
3. Rx NB EQ/DRC and WB/SWB DRC in Voice_Generic for TIA-5050 and RLR
- Handsfree mode
1. Tx SWB EQ & NB/WB/SWB AEC in Voice_Generic for SLR/SFR & ECDT
2. Tx NS NB/WB/SWB tuning settings 1227v2 in Voice_Generic for 3QUEST
3. Rx NB/WB Vol and SWB EQ/DRC/Vol Voice_Generic for Distortion/RFR/RLR
KM4/CM4/TK4 Headset (Gene)
- Align TX PGA gain setting for all mode for AMS
- Align Condor WB RX and Condor Headphone WB RX
KM4/CM4/TK4 Bluetooth (Gene)
- Align TX PGA gain setting for all mode for AMS
Bug: 319579984
Test: Verified by Acoustic team
Change-Id: If104d273fb91e5eedf167a4c22522155b124a77b
Signed-off-by: Carter Hsu <carterhsu@google.com>
