<CL>
CM4
--Handset/Handsfree(Duncan)
Handset
1: WB RFR nom vol for pass 3GPP/orange mask
Handsfree
1: May23 EC tuning to fix echo with protective case on phone stand
2: May24_noNStuned EC tuning to fix echo when nearend in noise env
3: WB/SWB RFR/RLR volume curve
TK4 (Ricky)
-Handsefree
1. Modify SLR for Orange testing
2. Batch copy from generic to co-use case
KM4 (Owen)
- Handsfree (Owen)
1. Tx: Lower down WB/SWB DRC gain 1.5dB to fix Orange SLR failures
WB: 25dB => 23.5dB / SWB: 26dB => 24.5dB
2. Batch copy 1. from generic to co-use case
3. Rx: Lower down SPK_Vol 1dB(Vol-2)/2dB(Vol-1)/3dB(Vol-0) for Reserve2 (VoIP) use case to fix Rx min vol too louder issue
Bug: 345569041
Test: verified by Acoustic team
Change-Id: Iea55a81b039f037d6472eb365a6749af82a107fb
Signed-off-by: Jason Hsu <jasonchhsu@google.com>
- KM4_freshmango_v4_Rev15C_LLv3_smooth2.mps
Bug: 343310595
Test: manual test from hardware
Change-Id: Ifd3068db61e4bf5c5983a335940469f46d24f4a5
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Bug: 315915958
Test: build pass and GPS function works
Change-Id: Ibe6f2ce01b95dea8fca53dda4833a81262ebc63a
Merged-In: Ibe6f2ce01b95dea8fca53dda4833a81262ebc63a
Add NavOptions=0x2443 to enable PDR
Add Chip_Configuration_mems_data_Configuration=0x27 to support Step
counter and Magnetometer
Test: VTS/CTS, sanity test/Sress test/SST
Change-Id: I48dcd5f4f46e152e80571e09a290ff17d52ffaf9
Enable dynamic routing feature for India, Israel, Taiwan, Singapore,
Switzerland, Slovakia, Poland, Slovenia, and Bosnia and Herzegovina.
Add emergency numbers requiring normal routing for India, Israel, France, Taiwan, Singapore, Switzerland, Guadeloupe, Slovakia, Poland, Reunion, Slovenia, and Bosnia and Herzegovina.
Bug: 336759603
Test: build and manual test
Change-Id: Ic9a3faccd43c12c30be42f800b2ab9781b46970b
Revert submission 27263809-disable-nfw-lock
Reason for revert: enable NFW after LOCSW-21052 is reverted in b/326439267 and fix test case failure in b/343511469
Reverted changes: /q/submissionid:27263809-disable-nfw-lock
Change-Id: Iffa05830a522e8a4e73a534c89dc8b3dec5dec87
- Remove stats monitoring for sub-sensors since they don't denote a
particular hotspot.
- Remove stats monitoring for wingboard configs.
- For vskin-legacy, vskin-model, vskin-speaker improve the resolution of
buckets by splitting range [49, 55] into [49, 51, 53, 55]
Bug: 341872098
Test: Push config and verify lshal
Change-Id: Iabff63922c283a595fa7ec2dfa8af539629d4064
Reveal real model and make name in the exif.
Test: CTS StillCaptureTest#testFocalLengths
Bug: 319743372
Change-Id: I95bb84e1ef2b6a8983a0ae09de476f0ed9db2115
Merged-In: I95bb84e1ef2b6a8983a0ae09de476f0ed9db2115
Bug: 341968564
Test: power and perf test on Komodo.Test result show in b/341968564#comment27
- Use newly tuned STREAMING_STANDARD setting.
Change-Id: If64ad8148c4740fe5716381d21543bc9d26ab623
- generated legacy formulas with DVT and CUJ data
- removed 'battery' thermistor from sensor combination list
- removed 'LINEAR' formulas
Bug: 342227291
Test: verified thermal hal service starts properly with it
Change-Id: Iff59072d432ff98afe852295745cebd81ec73d15
Signed-off-by: Jikai Ma <Jikai@google.com>
With previous samples being used in vt estimation, the sampling period
between vt estimation calls impact vt accuracy. Currently vt model is
using default cache interval of 2 seconds. This change sets the cache
interval to 7 seconds explicitly to match with passive delay
Bug: 341967304
Test: Check vt estimation invoke calls with frequency thermalservice dump
Change-Id: Ic6a38939b2bec88a66c87517e6efa548566ea877
Signed-off-by: Sayanna Chandula <sayanna@google.com>
Added some smoothing fixes for media <-> phone call preset switch.
Bug: 340378261
Test: manual and PTS tests
Change-Id: Ibd3c881c88a53249a3d17172ebc41e1bd703b322
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Added some smoothing fixes for media <-> phone call preset switch.
No change to tuning parameters in any media, notification mode.
Phone call avg MCPS still at 40; Peak MCPS for Phone call: TBD
Bug: 340378261
Test: manual and PTS tests
Change-Id: I537d0be29f2c4583ef63cd042317053a58ca1d4e
Signed-off-by: Jasmine Cha <chajasmine@google.com>
Due to defalut passive delay of 2 seconds being used for the VT sensor,
previous samples are ignored at 7 seconds intervals. This change sets
explicit passive_delay for VT sensor to make sure we are not ignoring
previous samples and apply step_ratio
Bug: 342257359
Test: Check VIRTUAL-SKIN-MODEL-UPDATED values at run time
Change-Id: I18a9e4913b8153b8d2c3a313451338a9f1b6ca0c
Signed-off-by: Sayanna Chandula <sayanna@google.com>
