27d5a1a5c4
- Add partial reset config control (default disable) - Add GlueLayer_IsUseCustomGnssLib support (default remove) - Add L5 Path Delay Parameters Bug: 329176689 Bug: 323089817 Bug: 296352970 Test: VTS/CTS, basic sanity, SST and Field test Change-Id: Ib0b7a333eb7c88af2ae4532a7f6b474bf41d85a5
279 lines
7.6 KiB
INI
279 lines
7.6 KiB
INI
############################################
|
|
GlueLayer_ToolConfigSelection=3
|
|
user_ports_tcp_name=Autotest
|
|
user_ports_tcp_port=7555
|
|
debug_console=1
|
|
debug_dir=/data/vendor/gps/logs
|
|
############################################
|
|
GlueLayer_IsGedKeyExist=1
|
|
GlueLayer_EnableGnssCfgInterface=1
|
|
|
|
uni_log_max_file_count=5
|
|
uni_log_max_size_mb=20
|
|
uni_log_total_max_size_mb=100
|
|
|
|
debug_enable=4
|
|
mem_dump_to_node=1
|
|
|
|
gnss_device_type=K042
|
|
|
|
gnss_device_patch_address=0
|
|
gnss_device_patch_file=/vendor/firmware/kepler.bin
|
|
|
|
# enable ism stream for GAAM
|
|
ism_stream_enable=1
|
|
caplay_port_tcp_port=@GNSS_ISM_CAPTURE_PLAYBACK
|
|
|
|
# CHIP_CONFIG_IO_OPT_HOSTIO_VIA_SECONDARY + CHIP_CONFIG_IO_OPT_CPMB_MASK
|
|
#Chip_Configuration_Io_Options=0x9
|
|
# enable DEBUG sync msg
|
|
#Chip_Configuration_Io_Options=0xD
|
|
|
|
# force CP crash on GAL bad ISM (1 is first instance, 2 is when we assert)
|
|
#Chip_Configuration_cpdbgsync=1
|
|
|
|
# Chip_Configuration_TrackerDebugMode = 0x10
|
|
|
|
# enables CHPP for SPI port
|
|
# uncomment the *chpp* lines below (and comment gnss_device-data_port_kepslim_present above) to use SPI+CHPP
|
|
# when using CHPP, make sure to enable the CHPP defines in build_settings.mak
|
|
chpp_betp_client=1
|
|
chpp_log_level=2
|
|
gnss_device_data_port_chpp_spi_device=/dev/gnss_ipc
|
|
gnss_device_data_port_chpp_present=1
|
|
|
|
### Update for VTS ###
|
|
GlueLayer_YearOfHW=2023
|
|
scheduling_enabled=1
|
|
|
|
# VDR End condition (meter, meter, sec, sec)
|
|
ChipCfg_VDR_high_end_Distance = 200
|
|
ChipCfg_VDR_low_end_Distance = 200
|
|
ChipCfg_VDR_high_end_Time = 20
|
|
ChipCfg_VDR_low_end_Time = 20
|
|
|
|
### temporarily disable precise time aiding ###
|
|
Chip_Configuration_AidingConfiguration=0x00020046
|
|
|
|
# set shared reference clock for freq aiding (0x20)
|
|
# enable dcxo (0x04)
|
|
Chip_Configuration_RefClkControl=0x24
|
|
#Chip_Configuration_RefClkControl=0x20
|
|
#Chip_Configuration_RefClkUncertainty=20000
|
|
|
|
### Override for DCXO Cnom/TuneValue
|
|
#Chip_Configuration_DCXOtuneValue=5143
|
|
|
|
### DCXO Optional Parameters. #####
|
|
# Can specify Crystal type, and/or over-ride T0-inflection point ####
|
|
#
|
|
# Optionally specify DXCO Crystal type, and operation mode
|
|
# 8 bits. Lower 4 bits Crystal ID# (0-15)
|
|
# Upper 4 bits Poly Configuration: (0/1)
|
|
# Poly Configuration: 0: Use CP's poly, 1: Force use of default manufactures polynomial
|
|
### Crystal Types:
|
|
## 0 - Unknown/Default
|
|
## 1 - Kyocera CT1612RB
|
|
## 2 - NDK NX1612SD CS12311
|
|
## 3 - NDK NX1612SD CS13950
|
|
## 4 - NDK NX1612SD CS15298
|
|
## 5 - KDS 7CG07680A10
|
|
## 6- TXC 0W76870003
|
|
## E.g. Use Kyocera, and ignore CP's polynomial: DCXO_CrystalType=0x11
|
|
## E.g. Use KDS, and Use CP's polynomial: DCXO_CrystalType=0x05
|
|
## LOOK! S5400 ERD's uses NDK(2), Phones use Kyocera(1). Default set to phone (1)
|
|
Chip_Configuration_DCXO_CrystalType=0x11
|
|
|
|
## Optionally specify DXCO Inflection point temperature, ####
|
|
# This will override any default value or value in Crystal type ####
|
|
# Value is degrees C x 100 E.g. 2855 = 28.55 deg C
|
|
# Range should be 2000 to 3100
|
|
#Chip_Configuration_DCXO_InflectionPoint=2855
|
|
|
|
Chip_Configuration_RfMiscCtrl = 0x80008001
|
|
|
|
### 2C48 L1 only MCW ###
|
|
#Chip_Configuration_GNSSConstConstraintDef=0x602F
|
|
#Chip_Configuration_RfMiscCtrl=0x80008001
|
|
|
|
# L1 HYSPDY - CP
|
|
#Chip_Configuration_GNSSConstConstraintDef=0x602F
|
|
#LocTech_Constraints = 0x602F
|
|
#Chip_Configuration_RfMiscCtrl=0x8001
|
|
#Chip_Configuration_IspTestConfig=0x22242822
|
|
|
|
# Disable BDS in the U.S.
|
|
# 0-enabled (default), 1-disabled, 2-auto(disabled in US)
|
|
#gloUsedInUSPolicy=2
|
|
bdsUsedInUSPolicy=2
|
|
sbasUsedInUSPolicy=2
|
|
qzssUsedInUSPolicy=2
|
|
navicUsedInUSPolicy=2
|
|
|
|
# DVS: 0 = Disabled, 1 = Enabled (default)
|
|
# DFS: 0 = Disabled, 1 = Enabled (default)
|
|
Chip_Configuration_FeatureCfg_DVS = 1
|
|
Chip_Configuration_FeatureCfg_DFS = 1
|
|
|
|
# This is a bitfield that will disable incoming interrupts for mailboxes
|
|
# AP = 0x1
|
|
# APM = 0x2
|
|
# CP = 0x4
|
|
# CHUB = 0x8
|
|
mailboxDisabled=0x0
|
|
|
|
### Specify RFIC ID for K42 ###
|
|
# 55400000 = S5540 EVT0
|
|
gnss_rfic_chip_id=55400000
|
|
|
|
# Uncomment to Disable SUPL
|
|
#Aiding_AidingType=0
|
|
# Uncomment to Disable SUPL (Ignore Android Framework Requests to Enable SUPL)
|
|
#GlueLayer_EnableFwConfiguration=0
|
|
|
|
#Uncomment to disable SGEE
|
|
#Sif_OperationMode=0
|
|
|
|
# Enables RTC time aiding from Host
|
|
# 1 - enable, 0 - disable (default)
|
|
UseRtcForAiding=1
|
|
|
|
# increase rtc uncertainty from Host to hedge against bad fixes
|
|
additional_rtc_uncertainty_ms=10
|
|
|
|
# set to 1 for FW SGEE download - Requires Android FW to be properly configured
|
|
Sif_UseFwXtraInterface=1
|
|
|
|
# ChipCfg_GetGpsWeekFloor variable allows testing of old GPS weeks.
|
|
# Used here to adjust the GPS week for carrier testing.
|
|
# Simulations in the past may be based on any week number.
|
|
# Guidelines:
|
|
# If simulation week absolute week number is:
|
|
# 1-1023: ChipCfg_SetGpsWeekFloor=1
|
|
# 1024-2047: ChipCfg_SetGpsWeekFloor=1024
|
|
# 2048-3071: ChipCfg_SetGpsWeekFloor=2048
|
|
# Example: ChipCfg_GetGpsWeekFloor=1024
|
|
# The above sets the correct operation when the true week is between 1024 and 2048
|
|
# ChipCfg_GetGpsWeekFloor=0
|
|
|
|
Agnss_IsGloAidingEnable=0
|
|
SETCaps_IsOtdoa=1
|
|
SETCaps_IsLpp=1
|
|
PosReq_Supl2Params_SuplNiUdpPort=7275
|
|
GlueLayer_LPPCpBitmask=0x17
|
|
GlueLayer_IsCpLteNeighborCellEnable=1
|
|
GlueLayer_isReqDBHFromFwRefLoc=1
|
|
GlueLayer_isReqUBPFromPressureSensor=1
|
|
GlueLayer_IsMemsEnable=1
|
|
GlueLayer_MeasCorrCap=7
|
|
Chip_Configuration_mems_data_Configuration=0x37
|
|
Chip_Configuration_FeatureCfg_ANDRD_MEAS_CORR_ENABLE=1
|
|
CP_LocTech_PrimaryConst=0
|
|
CP_LocTech_Constraints=1
|
|
CP_LocTech_Requirements=0
|
|
UP_LocTech_PrimaryConst=0
|
|
UP_LocTech_Constraints=1
|
|
UP_LocTech_Requirements=0
|
|
SpotLogger_Allowed=0
|
|
|
|
soft_dog=0
|
|
|
|
path_delay_glo_12fx_cm=-5185,-5158,-5112,-5111,-5031,-4972,-4900,-4823,-4765,-4714,-4625,-4613,-4553,-4553
|
|
path_delay_gps_2fx_cm=12378
|
|
path_delay_bds_4fx_cm=168
|
|
path_delay_l5_20fx_cm=105902
|
|
|
|
RfPathLossDb_Ap=3520
|
|
RfPathLossDb_Cp=3520
|
|
RfPathLossDb_L5_Ap=3700
|
|
RfPathLossDb_L5_Cp=3700
|
|
NmeaBitmask=0x010003fff
|
|
|
|
# force engine to use entire response time for emergency session; default 0
|
|
IsUseEntireRespTime911=1
|
|
# force engine to engage high accuracy if entire response time used; default 0
|
|
isForceHighAccuracyMode=1
|
|
|
|
# This is to indicate if AP supports CP partial reset feature
|
|
# default = CP partial reset feature enabled
|
|
# 0 = CP partial reset feature enabled
|
|
# 1 = CP partial reset feature disabled
|
|
cp_partial_reset_disable=1
|
|
|
|
# 0: Use calibrated Accel data 1: Use uncalibrated Accel data
|
|
isUseUncalAccel=1
|
|
|
|
GNSS_CARRIER_CONFIG_BEGIN
|
|
# DEFAULT
|
|
GNSS_CARRIER_ID=0
|
|
ENABLE_CAPS_OTDOA=1
|
|
ENABLE_2G_CP_CAPS_MSA=1
|
|
ENABLE_2G_CP_CAPS_MSB=1
|
|
ENABLE_3G_CP_CAPS_MSA=1
|
|
ENABLE_3G_CP_CAPS_MSB=1
|
|
ENABLE_4G_CP_CAPS_MSA=1
|
|
ENABLE_4G_CP_CAPS_MSB=1
|
|
ENABLE_5G_CP_CAPS_MSA=1
|
|
ENABLE_5G_CP_CAPS_MSB=1
|
|
ENABLE_2G_UP_CAPS_MSA=1
|
|
ENABLE_2G_UP_CAPS_MSB=1
|
|
ENABLE_3G_UP_CAPS_MSA=1
|
|
ENABLE_3G_UP_CAPS_MSB=1
|
|
ENABLE_4G_UP_CAPS_MSA=1
|
|
ENABLE_4G_UP_CAPS_MSB=1
|
|
ENABLE_5G_UP_CAPS_MSA=0
|
|
ENABLE_5G_UP_CAPS_MSB=0
|
|
SUPL_SSL_METHOD=TLSv1_1
|
|
SUPL_HMAC_HASH=SHA256
|
|
SUPL_UT2_SEC=20
|
|
SUPL_UT3_SEC=20
|
|
ENABLE_LPP_CP=1
|
|
ENABLE_LPP_UP=0
|
|
ENABLE_LPPE_CP=3
|
|
ENABLE_LPPE_UP=0
|
|
ENABLE_NLP_IN_LPPE=1
|
|
ENABLE_NLP_IN_AGNSS=0
|
|
ENABLE_LPP_HA_GAD_SHAPE=0
|
|
USE_EMER_PDN_FOR_EMER_SUPL=1
|
|
# ATT
|
|
GNSS_CARRIER_ID=1
|
|
# TMO
|
|
GNSS_CARRIER_ID=2
|
|
ENABLE_3G_CP_CAPS_MSA=0
|
|
ENABLE_4G_CP_CAPS_MSA=0
|
|
ENABLE_NLP_IN_LPPE=0
|
|
ENABLE_NLP_IN_AGNSS=1
|
|
ENABLE_LPP_HA_GAD_SHAPE=1
|
|
# VZW
|
|
GNSS_CARRIER_ID=3
|
|
ENABLE_LPP_UP=1
|
|
ENABLE_LPPE_UP=3
|
|
SUPL_SSL_METHOD=TLSv1_2
|
|
SUPL_UT2_SEC=10
|
|
SUPL_UT3_SEC=30
|
|
# AIRTEL
|
|
GNSS_CARRIER_ID=4
|
|
# RAKUTEN
|
|
GNSS_CARRIER_ID=5
|
|
ENABLE_LPP_UP=1
|
|
ENABLE_LPPE_UP=3
|
|
# KDDI
|
|
GNSS_CARRIER_ID=6
|
|
ENABLE_LPP_CP=0
|
|
ENABLE_LPP_UP=1
|
|
ENABLE_LPPE_CP=0
|
|
ENABLE_LPPE_UP=3
|
|
# SBM
|
|
GNSS_CARRIER_ID=7
|
|
ENABLE_LPP_CP=0
|
|
ENABLE_LPPE_CP=0
|
|
ENABLE_5G_CP_CAPS_MSA=0
|
|
ENABLE_5G_CP_CAPS_MSB=0
|
|
USE_EMER_PDN_FOR_EMER_SUPL=0
|
|
# DOCOMO
|
|
GNSS_CARRIER_ID=8
|
|
# LAB
|
|
GNSS_CARRIER_ID=9
|
|
ENABLE_LPP_UP=1
|
|
ENABLE_LPPE_UP=3
|
|
GNSS_CARRIER_CONFIG_END
|