Evolution-X-Tensor/device_google_caimito
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
device_google_caimito/device-komodo.mk
Charlotte Lu e64e6da939 Add JP Initial MIC elabel 
Fix: 317019325

Test: Visual

Change-Id: Idbb66adbe7773d85e87660a45822af9f01bc595c
2024-01-29 10:01:06 +00:00

342 lines
12 KiB
Makefile
Raw Blame History

#
# Copyright (C) 2021 The Android Open-Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
TARGET_KERNEL_DIR ?= device/google/caimito-kernel
TARGET_BOARD_KERNEL_HEADERS := device/google/caimito-kernel/kernel-headers
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
USE_UWBFIELDTESTQM := true
endif
ifeq ($(filter factory_komodo, $(TARGET_PRODUCT)),)
include device/google/caimito/komodo/uwb/uwb_calibration.mk
endif
$(call inherit-product-if-exists, vendor/google_devices/caimito/prebuilts/device-vendor-komodo.mk)
$(call inherit-product-if-exists, vendor/google_devices/zumapro/prebuilts/device-vendor.mk)
$(call inherit-product-if-exists, vendor/google_devices/zumapro/proprietary/device-vendor.mk)
$(call inherit-product-if-exists, vendor/google_devices/caimito/proprietary/komodo/device-vendor-komodo.mk)
$(call inherit-product-if-exists, vendor/qorvo/uwb/qm35-hal/Device.mk)
# display
DEVICE_PACKAGE_OVERLAYS += device/google/caimito/komodo/overlay
ifeq ($(RELEASE_PIXEL_AIDL_AUDIO_HAL),true)
USE_AUDIO_HAL_AIDL := true
endif
include device/google/caimito/audio/komodo/audio-tables.mk
include device/google/zumapro/device-shipping-common.mk
include hardware/google/pixel/vibrator/cs40l26/device.mk
include device/google/gs-common/bcmbt/bluetooth.mk
include device/google/gs-common/touch/gti/gti.mk
include device/google/gs-common/touch/syna/syna20.mk
include device/google/caimito/fingerprint/ultrasonic_udfps.mk
-include vendor/samsung_slsi/gps/s5400/location/gnssd/device-gnss.mk
# go/lyric-soong-variables
$(call soong_config_set,lyric,camera_hardware,komodo)
$(call soong_config_set,lyric,tuning_product,komodo)
$(call soong_config_set,google3a_config,target_device,komodo)
# Display RRS default Config
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += persist.vendor.display.primary.boot_config=1008x2244@120:120
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.vendor.primarydisplay.preferred_mode=1008x2244@120:120
ifeq ($(filter factory_komodo, $(TARGET_PRODUCT)),)
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.vendor.primarydisplay.vrr.enabled=true
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.vendor.primarydisplay.vrr.expected_present.headsup_ns=30000000
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.vendor.primarydisplay.vrr.expected_present.timeout_ns=500000000
endif
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.ignore_hdr_camera_layers=true
# Display OP HZ Config
PRODUCT_VENDOR_PROPERTIES += \
vendor.primarydisplay.op.hs_hz=120 \
vendor.primarydisplay.op.ns_hz=60 \
vendor.primarydisplay.op.ns_min_dbv=440 \
vendor.primarydisplay.op.hs_switch_min_dbv=1088 \
vendor.primarydisplay.op.hist_delta_th=15
# Init files
PRODUCT_COPY_FILES += \
device/google/caimito/conf/init.komodo.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.komodo.rc
# Recovery files
PRODUCT_COPY_FILES += \
device/google/caimito/conf/init.recovery.device.rc:$(TARGET_COPY_OUT_RECOVERY)/root/init.recovery.komodo.rc
# NFC
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \
frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \
frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \
frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \
frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml \
device/google/caimito/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \
device/google/caimito/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf
PRODUCT_PACKAGES += \
$(RELEASE_PACKAGE_NFC_STACK) \
Tag \
android.hardware.nfc-service.st \
NfcOverlayKomodo
# SecureElement
PRODUCT_PACKAGES += \
android.hardware.secure_element-service.thales
PRODUCT_COPY_FILES += \
frameworks/native/data/etc/android.hardware.se.omapi.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.ese.xml \
frameworks/native/data/etc/android.hardware.se.omapi.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.uicc.xml \
device/google/caimito/nfc/libse-gto-hal.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal.conf
# Bluetooth HAL
PRODUCT_COPY_FILES += \
device/google/caimito/bluetooth/bt_vendor_overlay_komodo.conf:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth/bt_vendor_overlay.conf
PRODUCT_PROPERTY_OVERRIDES += \
ro.bluetooth.a2dp_offload.supported=true \
persist.bluetooth.a2dp_offload.disabled=false \
persist.bluetooth.a2dp_offload.cap=sbc-aac-aptx-aptxhd-ldac-opus
# Bluetooth Tx power caps
PRODUCT_COPY_FILES += \
$(LOCAL_PATH)/bluetooth/bluetooth_power_limits.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits.csv
# DCK properties based on target
PRODUCT_PROPERTY_OVERRIDES += \
ro.gms.dck.eligible_wcc=3 \
ro.gms.dck.se_capability=1
# POF
PRODUCT_PRODUCT_PROPERTIES += \
ro.bluetooth.finder.supported=true
# Spatial Audio
PRODUCT_PACKAGES += \
libspatialaudio
# declare use of spatial audio
PRODUCT_PROPERTY_OVERRIDES += \
ro.audio.spatializer_enabled=true
# Sound Dose
PRODUCT_PACKAGES += \
android.hardware.audio.sounddose-vendor-impl \
audio_sounddose_aoc \
# Audio CCA property
PRODUCT_PROPERTY_OVERRIDES += \
persist.vendor.audio.cca.enabled=false
# Bluetooth hci_inject test tool
PRODUCT_PACKAGES_DEBUG += \
hci_inject
# Bluetooth OPUS codec
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.opus.enabled=true
# Bluetooth SAR test tool
PRODUCT_PACKAGES_DEBUG += \
sar_test
# Bluetooth EWP test tool
PRODUCT_PACKAGES_DEBUG += \
ewp_tool
# Bluetooth AAC VBR
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.a2dp_aac.vbr_supported=true
# Bluetooth Super Wide Band
PRODUCT_PRODUCT_PROPERTIES += \
bluetooth.hfp.swb.supported=true
# Override BQR mask to enable LE Audio Choppy report, remove BTRT logging
ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.bqr.event_mask=295006 \
persist.bluetooth.bqr.vnd_quality_mask=29 \
persist.bluetooth.bqr.vnd_trace_mask=0 \
persist.bluetooth.vendor.btsnoop=true
else
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.bqr.event_mask=295006 \
persist.bluetooth.bqr.vnd_quality_mask=16 \
persist.bluetooth.bqr.vnd_trace_mask=0 \
persist.bluetooth.vendor.btsnoop=false
endif
# default BDADDR for EVB only
PRODUCT_PROPERTY_OVERRIDES += \
ro.vendor.bluetooth.evb_bdaddr="22:22:22:33:44:55"
# Spatial Audio
PRODUCT_PACKAGES += \
libspatialaudio \
librondo
# Keymaster HAL
#LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= android.hardware.keymaster@4.1-service
# Gatekeeper HAL
#LOCAL_GATEKEEPER_PRODUCT_PACKAGE ?= android.hardware.gatekeeper@1.0-service.software
# Gatekeeper
# PRODUCT_PACKAGES += \
# android.hardware.gatekeeper@1.0-service.software
# Keymint replaces Keymaster
# PRODUCT_PACKAGES += \
# android.hardware.security.keymint-service
# Keymaster
#PRODUCT_PACKAGES += \
# android.hardware.keymaster@4.0-impl \
# android.hardware.keymaster@4.0-service
#PRODUCT_PACKAGES += android.hardware.keymaster@4.0-service.remote
#PRODUCT_PACKAGES += android.hardware.keymaster@4.1-service.remote
#LOCAL_KEYMASTER_PRODUCT_PACKAGE := android.hardware.keymaster@4.1-service
#LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= android.hardware.keymaster@4.1-service
# PRODUCT_PROPERTY_OVERRIDES += \
# ro.hardware.keystore_desede=true \
# ro.hardware.keystore=software \
# ro.hardware.gatekeeper=software
# PowerStats HAL
PRODUCT_SOONG_NAMESPACES += \
device/google/caimito/powerstats/komodo
# WiFi Overlay
PRODUCT_PACKAGES += \
WifiOverlay2024
# Settings Overlay
PRODUCT_PACKAGES += \
SettingsKomodoOverlay
# Trusty liboemcrypto.so
PRODUCT_SOONG_NAMESPACES += vendor/google_devices/caimito/prebuilts
# UWB
PRODUCT_SOONG_NAMESPACES += \
device/google/caimito/komodo/uwb
# Location
# SDK build system
$(call soong_config_set, include_libsitril-gps-wifi, board_without_radio, $(BOARD_WITHOUT_RADIO))
include device/google/gs-common/gps/brcm/device.mk
PRODUCT_SOONG_NAMESPACES += device/google/caimito/location/komodo
SOONG_CONFIG_NAMESPACES += gpssdk
SOONG_CONFIG_gpssdk += gpsconf
SOONG_CONFIG_gpssdk_gpsconf ?= $(TARGET_BUILD_VARIANT)
PRODUCT_PACKAGES += \
gps.cer \
gps.xml \
scd.conf \
lhd.conf
# Display LBE
PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.lbe.supported=1
#Thermal VT estimator
PRODUCT_PACKAGES += \
libthermal_tflite_wrapper
# Set zram size
PRODUCT_VENDOR_PROPERTIES += \
vendor.zram.size=50p \
persist.device_config.configuration.disable_rescue_party=true
PRODUCT_VENDOR_PROPERTIES += \
persist.vendor.udfps.als_feed_forward_supported=true \
persist.vendor.udfps.lhbm_controlled_in_hal_supported=true
# Camera Vendor property
PRODUCT_VENDOR_PROPERTIES += \
persist.vendor.camera.front_720P_always_binning=true
# Vibrator HAL
ACTUATOR_MODEL := luxshare_ict_081545
ADAPTIVE_HAPTICS_FEATURE := adaptive_haptics_v1
PRODUCT_VENDOR_PROPERTIES += \
ro.vendor.vibrator.hal.chirp.enabled=1 \
ro.vendor.vibrator.hal.device.mass=0.222 \
ro.vendor.vibrator.hal.loc.coeff=2.8 \
persist.vendor.vibrator.hal.context.enable=false \
persist.vendor.vibrator.hal.context.scale=60 \
persist.vendor.vibrator.hal.context.fade=true \
persist.vendor.vibrator.hal.context.cooldowntime=1600 \
persist.vendor.vibrator.hal.context.settlingtime=5000 \
ro.vendor.vibrator.hal.pm.activetimeout=5
# PKVM Memory Reclaim
PRODUCT_VENDOR_PROPERTIES += \
hypervisor.memory_reclaim.supported=1
# Bluetooth LE Audio
# Unicast
PRODUCT_PRODUCT_PROPERTIES += \
bluetooth.profile.bap.unicast.client.enabled=true \
bluetooth.profile.csip.set_coordinator.enabled=true \
bluetooth.profile.hap.client.enabled=true \
bluetooth.profile.mcp.server.enabled=true \
bluetooth.profile.ccp.server.enabled=true \
bluetooth.profile.vcp.controller.enabled=true
ifeq ($(RELEASE_PIXEL_BROADCAST_ENABLED), true)
PRODUCT_PRODUCT_PROPERTIES += \
bluetooth.profile.bap.broadcast.assist.enabled=true \
bluetooth.profile.bap.broadcast.source.enabled=true
endif
# LE Audio switcher in developer options
PRODUCT_PRODUCT_PROPERTIES += \
ro.bluetooth.leaudio_switcher.supported=true \
# Enable hardware offloading
PRODUCT_PRODUCT_PROPERTIES += \
ro.bluetooth.leaudio_offload.supported=true \
persist.bluetooth.leaudio_offload.disabled=false
# Bluetooth LE Audio CIS handover to SCO
# Set the property only for the controller couldn't support CIS/SCO simultaneously. More detailed in b/242908683.
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.leaudio.notify.idle.during.call=true
# LE Audio Offload Capabilities setting
PRODUCT_COPY_FILES += \
device/google/caimito/bluetooth/le_audio_codec_capabilities.xml:$(TARGET_COPY_OUT_VENDOR)/etc/le_audio_codec_capabilities.xml
# Disable LE Audio dual mic SWB call support
# This may depend on the BT controller capability or the launch strategy
# For example, P22 BT chip is not able to support 32k dual mic
# P23a disabled the 32k dual mic as it is not in the phase 2 launch plan
PRODUCT_PRODUCT_PROPERTIES += \
bluetooth.leaudio.dual_bidirection_swb.supported=true
# LE Audio Unicast Allowlist
PRODUCT_PRODUCT_PROPERTIES += \
persist.bluetooth.leaudio.allow_list=SM-R510
# Exynos RIL and telephony
# Support RIL Domain-selection
SUPPORT_RIL_DOMAIN_SELECTION := true
Reference in a new issue View git blame Copy permalink