We've started pushing init.insmod.*.cfg into the kernel prebuilts, and
installing it to /vendor_dlkm/etc, but it may not be available on all
prebuilt variants (e.g., kernel 5.10).
Here, we:
1. conditionally install our common init.*cfg to /vendor_dlkm (only if
$(TARGET_KERNEL_DIR) doesn't have a copy)
2. point init at /vendor_dlkm/etc
When we've cycled completely off of kernel 5.10, we can drop #1.
Bug: 369686096
Test: build, boot
Flag: EXEMPT refactor
Change-Id: If8f879366645cbe9bf330d136dd7190763b2d6bc
Bug: 284431215
Test: 1. No hall sensor in getevent.
2. Inner/outer screen can be switched in offmode charging,
recovery, fastboot mode.
Change-Id: Id9f93b4687898cf23601516cf69d0338df14e2aa
Signed-off-by: Rick Chen <rickctchen@google.com>
rt_uclamp_min and sf_uclamp_min have been made redundant in Pixel by
ADPF for sf, so we are just going to remove them outright rather than
worrying about overriding them later
Bug: 285248880
Test: manual
Change-Id: I7a0d90271fd015f92fde5b0ca7f838db98a45331
Allow these devices to send CPU hints to PowerHAL from SF to reduce
drops and save power.
Bug: b/241152899
Bug: b/195990840
Test: manual
Change-Id: If485f2bb12c5e44e58f294807b5085016b148192
(Port from commit 8a419466b86ab07a25fc18d7d6a2a9ee154f6839)
The correct path should be under /data,
or it is not writable.
wpa_supplicant now support p2p overlay configuration, a unified
wpa_supplicant init entry can be used.
Bug: 238601241
Test: create a group and check this group is persisted
after reboot
Change-Id: If34d3173bba6d3fe2296d3dd63b05d99221faf42
Temporary disble the twoshay service for bring up stage.
Bug: 232043149
Test: touch is workable after stop twoshay.
Signed-off-by: davidycchen <davidycchen@google.com>
Change-Id: I5a216458b6d8692c530fca31ff44dd53697593c5
--w------- 1 system system 4096 2022-04-27 08:15 clk_enable
--w------- 1 system system 4096 2022-04-27 08:15 hw_reset
-rw------- 1 system system 4096 2022-04-27 08:15 irq
--w------- 1 system system 4096 2022-04-27 08:15 wakeup_enable
Bug: 229685137
Test: make -j112 & check node property changed
Change-Id: Ide6d18dbdaf7faf347615bcdafc18b29778df0da
Include necessary definition, service for wlan function.
Bug: 228913716
Test: WiFi can be enabled with "adb shell cmd wifi set-wifi-enabled enabled"
Test: WiFi can scan with "adb shell cmd wifi start-scan"
Test: WiFi can get scan result with "adb shell cmd wifi list-scan-results"
Test: WiFi can connect to an AP with "adb shell cmd wifi connect-network GoogleGuest open"
Test: WiFi can ping with "adb shell ping www.google.com"
Change-Id: I8798cc1662191f72d672d6b40f92d1ce62b84c74
Bug: 226505523
Test: Set ro.bootmode=factory and see hall sensor is disabled.
Signed-off-by: Rick Chen <rickctchen@google.com>
Change-Id: Ic698c1ed9fde777f5686c1597eee2ec7b8952474
Disable SKIN thermal throttling to avoid any side effect until we
receive the device which has the normal HW thermal solution.
Because the Tj thermal throttling is still workable, so there should be
no overheating risk.
Bug: 221077673
Test: no thermalHAL crash found
Change-Id: I88c23527b5add9e6b07a2ea4ab824ea4f699261c
based on pipit 93e38fbd070b55875d9c23e214dff6d26ac0cdf9
based on cheetah cdc1dc5379faf6bb60cf4f8b4b967ae87992b2ed
Bug: 206057564
Change-Id: I68ca7715cf7fd96066d8d517bc4daf236512f501
based on pipit 68a0b4b411e8d23dfd966d24a5c35ea4ffb9d5f1
and cheetah 9acaa7507c23ffc7ca5f82a9579dd3a7c56af809
Bug: 206057564
Change-Id: Id59ed48d2a39c9a5a811c41157732914f3568d51
