gs101: Remove userdebug/eng configuration

Change-Id: Ie1e8b6bbebdfac97f8bc382e41c70cc8a32caf07

Android.bp

@@ -34,11 +34,3 @@ license {
         "NOTICE",
     ],
 }
-
-prebuilt_etc {
-    name: "preinstalled-packages-product-gs101-device-debug.xml",
-    src: "preinstalled-packages-product-gs101-device-debug.xml",
-    product_specific: true,
-    sub_dir: "sysconfig",
-    filename_from_src: true,
-}

BoardConfig-common.mk

@@ -208,12 +208,6 @@ BOARD_USES_GENERIC_AUDIO := true
 
 $(call soong_config_set,aoc_audio_func,ext_hidl,true)
 
-ifneq (,$(filter eng, $(TARGET_BUILD_VARIANT)))
-$(call soong_config_set,aoc_audio_func,dump_usecase_data,true)
-$(call soong_config_set,aoc_audio_func,hal_socket_control,true)
-$(call soong_config_set,aoc_audio_func,record_tuning_keys,true)
-endif
-
 ifneq (,$(filter aosp_%,$(TARGET_PRODUCT)))
 $(call soong_config_set,aoc_audio_func,aosp_build,true)
 endif

conf/init.debug.rc

@@ -1,30 +0,0 @@
-# SJTAG
-on init
-    chown system system /sys/devices/platform/sjtag_ap/interface/access_lvl
-    chown system system /sys/devices/platform/sjtag_ap/interface/auth
-    chown system system /sys/devices/platform/sjtag_ap/interface/begin
-    chown system system /sys/devices/platform/sjtag_ap/interface/dbg_domain
-    chown system system /sys/devices/platform/sjtag_ap/interface/dbg_itvl
-    chown system system /sys/devices/platform/sjtag_ap/interface/end
-    chown system system /sys/devices/platform/sjtag_ap/interface/pubkey
-    chown system system /sys/devices/platform/sjtag_gsa/interface/access_lvl
-    chown system system /sys/devices/platform/sjtag_gsa/interface/auth
-    chown system system /sys/devices/platform/sjtag_gsa/interface/begin
-    chown system system /sys/devices/platform/sjtag_gsa/interface/dbg_domain
-    chown system system /sys/devices/platform/sjtag_gsa/interface/dbg_itvl
-    chown system system /sys/devices/platform/sjtag_gsa/interface/end
-    chown system system /sys/devices/platform/sjtag_gsa/interface/pubkey
-
-# Bluetooth
-on post-fs-data
-    chown bluetooth system /dev/logbuffer_btlpm
-    chown bluetooth system /dev/logbuffer_tty16
-
-on property:vendor.debug.ramdump.force_crash=true
-    write /sys/kernel/pixel_debug/trigger "null"
-
-on property:power.battery_input.suspended=true
-   write /sys/kernel/debug/google_charger/input_suspend 1
-
-on property:power.battery_input.suspended=false
-   write /sys/kernel/debug/google_charger/input_suspend 0

device.mk

@@ -35,7 +35,6 @@ include device/google/gs-common/gps/dump/log.mk
 include device/google/gs-common/widevine/widevine.mk
 include device/google/gs-common/sota_app/factoryota.mk
 include device/google/gs-common/misc_writer/misc_writer.mk
-include device/google/gs-common/gyotaku_app/gyotaku.mk
 include device/google/gs-common/bootctrl/bootctrl_aidl.mk
 include device/google/gs-common/betterbug/betterbug.mk
 ifneq ($(filter oriole raven bluejay, $(TARGET_PRODUCT)),)
@@ -91,37 +90,8 @@ PRODUCT_SOONG_NAMESPACES += \
 	vendor/samsung_slsi/telephony/$(BOARD_USES_SHARED_VENDOR_TELEPHONY)
 endif
 
-ifneq (,$(filter eng, $(TARGET_BUILD_VARIANT)))
-#Set IKE logs to verbose for WFC
-PRODUCT_PROPERTY_OVERRIDES += log.tag.IKE=VERBOSE
-
-#Set Shannon IMS logs to debug
-PRODUCT_PROPERTY_OVERRIDES += log.tag.SHANNON_IMS=DEBUG
-
-#Set Shannon QNS logs to debug
-PRODUCT_PROPERTY_OVERRIDES += log.tag.ShannonQNS=DEBUG
-PRODUCT_PROPERTY_OVERRIDES += log.tag.ShannonQNS-ims=DEBUG
-PRODUCT_PROPERTY_OVERRIDES += log.tag.ShannonQNS-emergency=DEBUG
-PRODUCT_PROPERTY_OVERRIDES += log.tag.ShannonQNS-mms=DEBUG
-PRODUCT_PROPERTY_OVERRIDES += log.tag.ShannonQNS-xcap=DEBUG
-PRODUCT_PROPERTY_OVERRIDES += log.tag.ShannonQNS-HC=DEBUG
-
-# Modem userdebug
-include device/google/gs101/modem/userdebug.mk
-endif
-
 include device/google/gs101/modem/user.mk
 
-ifneq (,$(filter eng, $(TARGET_BUILD_VARIANT)))
-# b/36703476: Set default log size to 1M
-PRODUCT_PROPERTY_OVERRIDES += \
-	ro.logd.size=1M
-# b/114766334: persist all logs by default rotating on 30 files of 1MiB
-PRODUCT_PROPERTY_OVERRIDES += \
-	logd.logpersistd=logcatd \
-	logd.logpersistd.size=30
-endif
-
 # From system.property
 PRODUCT_PROPERTY_OVERRIDES += \
 	ro.telephony.default_network=27 \
@@ -321,11 +291,6 @@ PRODUCT_COPY_FILES += \
 PRODUCT_COPY_FILES += \
 	device/google/gs101/conf/init.gs101.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.gs101.rc
 
-ifneq (,$(filter eng, $(TARGET_BUILD_VARIANT)))
-PRODUCT_COPY_FILES += \
-	device/google/gs101/conf/init.debug.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.debug.rc
-endif
-
 ifneq (,$(filter 5.%, $(TARGET_LINUX_KERNEL_VERSION)))
 PRODUCT_COPY_FILES += \
 	device/google/gs101/storage/5.10/init.gs101.storage.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.gs101.storage.rc
@@ -372,14 +337,6 @@ PRODUCT_PACKAGES += \
 	messaging
 
 # CHRE
-## tools
-ifneq (,$(filter eng, $(TARGET_BUILD_VARIANT)))
-PRODUCT_PACKAGES += \
-	chre_power_test_client \
-	chre_test_client \
-	chre_aidl_hal_client
-endif
-
 ## HAL
 include device/google/gs-common/chre/hal.mk
 PRODUCT_COPY_FILES += \
@@ -398,13 +355,8 @@ PRODUCT_PACKAGES += \
 	checkpoint_gc
 
 # Vendor verbose logging default property
-ifneq (,$(filter eng, $(TARGET_BUILD_VARIANT)))
-PRODUCT_PROPERTY_OVERRIDES += \
-	persist.vendor.verbose_logging_enabled=true
-else
 PRODUCT_PROPERTY_OVERRIDES += \
 	persist.vendor.verbose_logging_enabled=false
-endif
 
 # CP Logging properties
 PRODUCT_PROPERTY_OVERRIDES += \
@@ -416,13 +368,8 @@ PRODUCT_PROPERTY_OVERRIDES += \
 	persist.vendor.sys.modem.logging.enable=true
 
 # Enable silent CP crash handling
-ifneq (,$(filter eng, $(TARGET_BUILD_VARIANT)))
-PRODUCT_PROPERTY_OVERRIDES += \
-	persist.vendor.ril.crash_handling_mode=1
-else
 PRODUCT_PROPERTY_OVERRIDES += \
 	persist.vendor.ril.crash_handling_mode=2
-endif
 
 # Add support dual SIM mode
 PRODUCT_PROPERTY_OVERRIDES += \
@@ -476,12 +423,6 @@ PRODUCT_PACKAGES += \
 PRODUCT_COPY_FILES += \
 	frameworks/native/data/etc/android.software.midi.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.software.midi.xml
 
-# default usb debug functions
-ifneq (,$(filter eng, $(TARGET_BUILD_VARIANT)))
-PRODUCT_PROPERTY_OVERRIDES += \
-	persist.vendor.usb.usbradio.config=dm
-endif
-
 # Power HAL
 PRODUCT_COPY_FILES += \
 	device/google/gs101/task_profiles.json:$(TARGET_COPY_OUT_VENDOR)/etc/task_profiles.json
@@ -570,12 +511,6 @@ PRODUCT_PACKAGES += \
 PRODUCT_PACKAGES += \
         ConnectivityOverlay
 
-PRODUCT_PACKAGES_ENG += \
-	f2fs_io \
-	check_f2fs \
-	f2fs.fibmap \
-	dump.f2fs
-
 # Storage dump
 include device/google/gs-common/storage/storage.mk
 
@@ -664,10 +599,6 @@ PRODUCT_PACKAGES += \
 	libdisplaycolor \
 	hwcomposer.$(TARGET_BOARD_PLATFORM)
 
-ifneq (,$(filter eng, $(TARGET_BUILD_VARIANT)))
-PRODUCT_PACKAGES += displaycolor_service
-endif
-
 PRODUCT_PROPERTY_OVERRIDES += \
 	debug.sf.disable_backpressure=0 \
 	debug.sf.enable_gl_backpressure=1
@@ -741,11 +672,6 @@ PRODUCT_PACKAGES += wpa_supplicant.conf
 
 WIFI_PRIV_CMD_UPDATE_MBO_CELL_STATUS := enabled
 
-ifneq (,$(filter eng, $(TARGET_BUILD_VARIANT)))
-PRODUCT_PACKAGES += wpa_cli
-PRODUCT_PACKAGES += hostapd_cli
-endif
-
 ####################################
 ## VIDEO
 ####################################
@@ -814,15 +740,9 @@ ifeq (,$(filter tangor citron,$(subst _, ,$(TARGET_PRODUCT))))
 include device/google/gs-common/gps/brcm/device.mk
 PRODUCT_COPY_FILES += \
 	device/google/gs101/location/gps.cer:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.cer
-ifneq (,$(filter eng, $(TARGET_BUILD_VARIANT)))
+PRODUCT_COPY_FILES += \
-        PRODUCT_COPY_FILES += \
+    device/google/gs101/location/lhd_user.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
-                device/google/gs101/location/lhd.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
+    device/google/gs101/location/scd_user.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf
-                device/google/gs101/location/scd.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf
-else
-        PRODUCT_COPY_FILES += \
-                device/google/gs101/location/lhd_user.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
-                device/google/gs101/location/scd_user.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf
-endif
 endif
 # Trusty (KM, GK, Storage)
 $(call inherit-product, system/core/trusty/trusty-storage.mk)
@@ -831,11 +751,6 @@ $(call inherit-product, system/core/trusty/trusty-base.mk)
 # Trusty dump
 include device/google/gs-common/trusty/trusty.mk
 
-# Trusty unit test tool
-PRODUCT_PACKAGES_ENG += \
-    trusty-ut-ctrl \
-    tipc-test
-
 include device/google/gs101/trusty_metricsd/trusty_metricsd.mk
 
 PRODUCT_PACKAGES += \
@@ -847,15 +762,9 @@ PRODUCT_PROPERTY_OVERRIDES += \
 	ro.frp.pst=/dev/block/by-name/frp
 
 # System props to enable Bluetooth Quality Report (BQR) feature
-ifneq (,$(filter eng, $(TARGET_BUILD_VARIANT)))
-PRODUCT_PRODUCT_PROPERTIES += \
-	persist.bluetooth.bqr.event_mask=262174 \
-	persist.bluetooth.bqr.min_interval_ms=500
-else
 PRODUCT_PRODUCT_PROPERTIES += \
 	persist.bluetooth.bqr.event_mask=30 \
 	persist.bluetooth.bqr.min_interval_ms=500
-endif
 
 # Enable Bluetooth AutoOn feature
 PRODUCT_PRODUCT_PROPERTIES += \
@@ -891,12 +800,6 @@ PRODUCT_PACKAGES += \
 PRODUCT_PACKAGES += \
 	Iwlan
 
-#Iwlan test app for eng builds
-ifneq (,$(filter eng, $(TARGET_BUILD_VARIANT)))
-PRODUCT_PACKAGES += \
-	IwlanTestApp
-endif
-
 PRODUCT_PACKAGES += \
 	whitelist \
 	libstagefright_hdcp \
@@ -917,9 +820,6 @@ PRODUCT_PACKAGES += ShannonIms
 
 $(call inherit-product-if-exists, vendor/samsung_slsi/telephony/$(BOARD_USES_SHARED_VENDOR_TELEPHONY)/shannon-iwlan/device-vendor.mk)
 
-PRODUCT_PACKAGES_ENG += \
-	preinstalled-packages-product-gs101-device-debug.xml
-
 PRODUCT_PACKAGES += ShannonRcs
 endif
 
@@ -985,13 +885,6 @@ PRODUCT_COPY_FILES += \
 PRODUCT_COPY_FILES += \
 	device/google/gs101/radio/gnss_blanking.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/gnss_blanking.csv
 
-# Vibrator Diag
-PRODUCT_PACKAGES_ENG += \
-	diag-vibrator \
-	diag-vibrator-cs40l25a \
-	diag-vibrator-drv2624 \
-	$(NULL)
-
 PRODUCT_PACKAGES += \
 	android.hardware.health-service.gs101 \
 	android.hardware.health-service.gs101_recovery \
@@ -1025,22 +918,6 @@ PRODUCT_PROPERTY_OVERRIDES += \
 PRODUCT_PACKAGES += vndservicemanager
 PRODUCT_PACKAGES += vndservice
 
-# TinyTools, debug tool and cs35l41 speaker calibration tool for Audio
-ifneq (,$(filter eng, $(TARGET_BUILD_VARIANT)))
-PRODUCT_PACKAGES += \
-	tinyplay \
-	tinycap \
-	tinymix \
-	tinypcminfo \
-	tinyhostless \
-	cplay \
-	aoc_hal \
-	aoc_tuning_inft \
-	crus_sp_cal \
-	mahal_test \
-	ma_aoc_tuning_test
-endif
-
 PRODUCT_PACKAGES += \
 	google.hardware.media.c2@1.0-service \
 	libgc2_store \
@@ -1126,9 +1003,6 @@ endif
 # Wifi ext
 include hardware/google/pixel/wifi_ext/device.mk
 
-# Battery Stats Viewer
-PRODUCT_PACKAGES_ENG += BatteryStatsViewer
-
 # Install product specific framework compatibility matrix
 # (TODO: b/169535506) This includes the FCM for system_ext and product partition.
 # It must be split into the FCM of each partition.

fingerprint/extension/Android.bp

@@ -1,15 +0,0 @@
-package {
-    // See: http://go/android-license-faq
-    // A large-scale-change added 'default_applicable_licenses' to import
-    // all of the 'license_kinds' from "device_google_gs101_license"
-    // to get the below license kinds:
-    //   SPDX-license-identifier-Apache-2.0
-    default_applicable_licenses: ["device_google_gs101_license"],
-}
-
-sh_binary {
-    name: "fingerprint.extension.sh",
-    init_rc: ["init.fingerprint.extension.rc"],
-    src: "fingerprint.extension.sh",
-    system_ext_specific: true,
-}

fingerprint/extension/fingerprint.extension.mk

@@ -1,14 +1,4 @@
 # Fingerprint extension feature
 ifneq (,$(filter aosp% factory%, $(TARGET_PRODUCT)))
 # Skip if device is AOSP or factory build
-else
-    ifneq (,$(filter eng, $(TARGET_BUILD_VARIANT)))
-    $(call soong_config_set,fp_hal_feature,report_bug_support,true)
-    BOARD_SEPOLICY_DIRS += hardware/google/pixel-sepolicy/fingerprint-extension/vendor/
-    SYSTEM_EXT_PUBLIC_SEPOLICY_DIRS += hardware/google/pixel-sepolicy/fingerprint-extension/system_ext/public/
-    SYSTEM_EXT_PRIVATE_SEPOLICY_DIRS += hardware/google/pixel-sepolicy/fingerprint-extension/system_ext/private/
-    PRODUCT_PACKAGES += \
-        fps_ext_bug_lib \
-        fingerprint.extension.sh
-    endif
 endif

fingerprint/extension/fingerprint.extension.sh

@@ -1,63 +0,0 @@
-#!/system/bin/sh
-
-# BetterBug required fields
-am='am start -a com.google.android.apps.betterbug.intent.FILE_BUG_DEEPLINK --ez EXTRA_DEEPLINK true '
-issueTitle=' --es EXTRA_ISSUE_TITLE '
-additionalComment=' --es EXTRA_ADDITIONAL_COMMENT '
-componentId=' --el EXTRA_COMPONENT_ID '
-requireBugReport=' --ez EXTRA_REQUIRE_BUGREPORT '
-bugAssign=' --es EXTRA_BUG_ASSIGNEE '
-ccGroup=' --es EXTRA_CC '
-
-# BetterBug title
-kAuthTitle="UDFPS Fingerprint authentication has high failed rate"
-kLockoutTitle="UDFPS Fingerprint has too many lockout counts"
-kLatencyTitle="UDFPS Fingerprint took long to unlock device"
-
-# BetterBug context comment
-kAuthComment="This bug is auto created by fingerprint HAL to track fingerprint authentication"
-kLockoutComment="This bug is auto created by fingerprint HAL to track fingerprint lockout"
-kLatencyComment="This bug is auto created by fingerprint HAL to track fingerprint latency"
-
-# BetterBug assign & CC owner
-kBugAssign='udfps_data_study@google.com'
-kCcGroup='eddielan@google.com'
-kComponentId='817555'
-
-# Command to send intent to BetterBug
-commonCommand="$componentId ${kComponentId//\ /\\ }
-               $requireBugReport true
-               $bugAssign ${kBugAssign//\ /\\ }
-               $ccGroup ${kCcGroup//\ /\\ }"
-authCommand="$am $issueTitle ${kAuthTitle//\ /\\ }
-             $additionalComment ${kAuthComment//\ /\\ }"
-lockoutCommand="$am $issueTitle ${kLockoutTitle//\ /\\ }
-                $additionalComment ${kLockoutComment//\ /\\ }"
-latencyCommand="$am $issueTitle ${kLatencyTitle//\ /\\ }
-                $additionalComment ${kLatencyComment//\ /\\ }"
-
-# Type of bug being triggered
-# 1. Latency
-# 2. Lockout
-# 3. Finerprint authentication(FRR)
-bug_type="$1"
-
-send=1
-if [ "$bug_type" == "latency" ]; then
-  intentCommand="$latencyCommand $commonCommand"
-elif [ "$bug_type" == "lockout" ]; then
-  intentCommand="$lockoutCommand $commonCommand"
-elif [ "$bug_type" == "auth" ]; then
-  intentCommand="$authCommand $commonCommand"
-else
-  send=0
-  echo "Unknown bug_type $bug_type"
-fi
-
-if [ $send -eq 1 ]
-then
-  eval $intentCommand
-fi
-
-# Exit
-exit 0

fingerprint/extension/init.fingerprint.extension.rc

@@ -1,19 +0,0 @@
-# init-fingerprint-extension-sh is to send intent command to app
-# for tracking fingerprint issue.
-service fingerprint-extension-bug-latency /system_ext/bin/fingerprint.extension.sh latency
-    group shell
-    user shell
-    disabled
-    oneshot
-
-service fingerprint-extension-bug-lockout /system_ext/bin/fingerprint.extension.sh lockout
-    group shell
-    user shell
-    disabled
-    oneshot
-
-service fingerprint-extension-bug-auth /system_ext/bin/fingerprint.extension.sh auth
-    group shell
-    user shell
-    disabled
-    oneshot

init.hardware.wlc.rc.userdebug

@@ -1,24 +0,0 @@
-#
-# Copyright (C) 2018 The Android Open-Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-on property:sys.boot_completed=1 && property:persist.vendor.limit.wlc.current=1
-    write /sys/class/power_supply/dc/current_max 75000
-
-on property:sys.boot_completed=1 && property:persist.vendor.limit.wlc.current=0
-    write /sys/class/power_supply/dc/current_max 1100000
-
-on property:vendor.disable.wlc=1
-    write /sys/class/power_supply/wireless/online 0

location/lhd.conf

@@ -1,34 +0,0 @@
-LheName=bbd
-
-LheRsmResetTimeoutMS=10000
-GpioNStdbyPath=/sys/devices/platform/10940000.spi/spi_master/spi5/spi5.0/nstandby
-
-LhePatch=/vendor/firmware/SensorHub.patch
-Lhe477xDebugFlags=RPC:FACILITY=65535-dKP+CUST+LHE:STDOUT_PUTS:STDOUT_LOG
-LheConsole=/data/vendor/gps/LheConsole
-
-LogEnabled=true
-Log=JAVA
-LogDirectory=/sdcard/gps/broadcom/storage
-
-LheBbdPacket=/dev/ttyBCM
-
-LheBbdControl=/dev/bbd_control
-
-# LheBbdSensor=/dev/bbd_sensor
-
-LheFailSafe=/data/vendor/gps/logs/esw-crash-dump.txt
-LogLevel=*:I
-
-NvStorageDir=/data/vendor/gps/
-
-# Enable BBD debugging at these stages:
-# LheDriverDebugFlags=PATCH_BBD:LHE_BBD:FSC_BBD
-
-LheAutoBaudDelayMS=10
-TrafficLogEnabled=false
-SecondaryConfigPath=/data/vendor/gps/overlay/lhd_overlay.conf
-
-SkipSensorWakeLock=true
-LoggerWakeLockEnable=false
-PpsEnable=true

location/scd.conf

@@ -1,6 +0,0 @@
-LogEnabled=true
-Log=JAVA
-LogDirectory=/sdcard/gps/broadcom/storage
-NvStorageDir=/data/vendor/gps/
-TcpConnectionTimeout=20
-SecondaryConfigPath=/data/vendor/gps/overlay/scd_overlay.conf

modem/userdebug.mk

@@ -1,4 +0,0 @@
-ifneq ($(BOARD_WITHOUT_RADIO),true)
-  PRODUCT_PACKAGES += vcd
-endif
-BOARD_VENDOR_SEPOLICY_DIRS += device/google/gs101/sepolicy/modem/userdebug/

preinstalled-packages-product-gs101-device-debug.xml

@@ -1,27 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!-- Copyright 2023 The Android Open Source Project
-
-     Licensed under the Apache License, Version 2.0 (the "License");
-     you may not use this file except in compliance with the License.
-     You may obtain a copy of the License at
-
-          http://www.apache.org/licenses/LICENSE-2.0
-
-     Unless required by applicable law or agreed to in writing, software
-     distributed under the License is distributed on an "AS IS" BASIS,
-     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-     See the License for the specific language governing permissions and
-     limitations under the License.
--->
-<!-- System packages to preinstall on gs101 debug devices, per user type.
-     Documentation at frameworks/base/data/etc/preinstalled-packages-platform.xml
--->
-<config>
-    <!-- Battery Stats Viewer (BatteryStatsViewer) -->
-    <install-in-user-type package="com.android.frameworks.core.batterystatsviewer">
-        <install-in user-type="FULL" />
-        <install-in user-type="PROFILE" />
-        <do-not-install-in user-type="android.os.usertype.profile.CLONE" />
-        <do-not-install-in user-type="android.os.usertype.profile.PRIVATE" />
-    </install-in-user-type>
-</config>