gs101: move charger thermal HAL setup into common code

Bug: 200615564
Test: build pass
Change-Id: I5a32c2b695dc9fd3e29e580c8a82e25f6c3a5f69
This commit is contained in:
David Chao 2022-03-30 13:35:11 +08:00 committed by TreeHugger Robot
parent b3786e5827
commit 980650080a

View file

@ -985,19 +985,10 @@ on property:vendor.thermal.link_ready=1
chown system system /dev/thermal/cdev-by-name/wlc_fcc/cur_state
chown system system /dev/thermal/cdev-by-name/usbc-port/cur_state
# Create thermal symlink in off charging mode
on charger
mkdir /dev/thermal 0750 system system
mkdir /dev/thermal/tz-by-name 0750 system system
mkdir /dev/thermal/cdev-by-name 0750 system system
start vendor.thermal.symlinks
write /proc/vendor_sched/sys_uclamp_min 0
write /proc/vendor_sched/sys_prefer_idle 0
# Launch thermal hal in off charging mode
on charger && property:vendor.thermal.link_ready=1
start vendor.thermal-hal-2-0
on property:vendor.disable.bcl.control=1
write /sys/devices/virtual/pmic/mitigation/instruction/enable_mitigation 0