Since we have 8G/12GB ram, increase swap size from 2G to 3G
since 3G swap shows best result.
note: we had used 2G swap for even 4G ram devices.
Bug: 187488125
Signed-off-by: Minchan Kim <minchan@google.com>
Change-Id: Iea8ab1126c378cd02a89c2ef982262431c894487
Bug: 194386750
Test: no Permission denied while accessing the file node
Signed-off-by: Jack Wu <wjack@google.com>
Change-Id: Ia399e59a2f7098147522161d5c7458545febfb77
Update usb_pwr_therm2 emul_temp control to allow
vendor.disable.usb.overheat.mitigation.control to disable/enable
usbc-port throttling to prevent device offline during thermal
mitigation test in lab.
Bug: 194252201
Test: setprop vendor.disable.usb.overheat.mitigation.control 0/1 to
check usb_pwr_therm2 temperature reading
Change-Id: Ia522706ce32bee68596b977a3e526f0b951a95ca
high-group is running on CPU 6-7.
mid-group is running on CPU 4-5.
mid-high-gropu is running on CPU 4-7.
Move camera tasks to CPU 4-7 for 1 seconds when AP launch.
Bug: 194271751
Test: GCA
Change-Id: I8e13e9ad0057b8f42f8ed3958bf0c6d58a5a02bc
Set uclamp_min and prefer_idle to sys_group to improve 2nd init
stage boot time performance.
* original
boot_progress_start_avg: 4832.3
* with tuning
boot_progress_start_avg: 4028.75
Bug: 193192017
Test: boot test
Change-Id: I8ebd52fddceadbee22e9a8c75969d52047b2acfc
To support USB port overheat protection, we need to launch thermalHAL in
off charging mode.
Bug: 183573049
Test: verified usb port overheat protection in off charging mode with
emul temp
Change-Id: I0b36646d9779c2c1a25f38aafea5ca178bf91be1
We have seen cases SF main thread running longer occasionally which may
run in danger of missing frames. This CL lifts cpufreq for SF when touch
boost is active to compensate the sudden jump of its cpu demand.
Bug: 192099706
Test: Build
Signed-off-by: Wei Wang <wvw@google.com>
Change-Id: I49b2d589249f60a38eab907afbadfbcfdd233d1c
Allow to thermalhal to update trip points for neutral_therm which is the
triggering sensor of virtual skin sensor for o6 proto.
Bug: 193373779
Test: neutral_therm can be updated to the correct threshold
Change-Id: I16dcd44ce9e69f456df322664756dc74357bf50b
init.usb.configfs.rc has the same trigger condition of midi function.
Rename the config name to "charger" to avoid triggerring twice of the
midi function.
Bug: 188744218
Test: USB enumerated in charger mode
Signed-off-by: Kyle Tso <kyletso@google.com>
Change-Id: Ica112fb4be66356901f6d5f21b79b9e648d49f35
This among other things greatly increases tethering performance.
Bug: 185092876
Test: TreeHugger, built and booted on an oriole, enabled tethering
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Change-Id: Ic9f0b4bef05250bb38c91dc1e046366098d98dc0
This is to expose a common path to runtime.
Test: Manual. Verified edgetpu_logging works with modified path
Bug: 191193044
Signed-off-by: Erick Reyes <erickreyes@google.com>
Change-Id: I11865108931443d96389640c89b6cc29aee3a634
It needs a USB function in charger mode to set the charging current to
500mA/900mA.
Bug: 188744218
Test: charging at 900mA in charger mode
Signed-off-by: Kyle Tso <kyletso@google.com>
Change-Id: I95c98ecec30dd4394228f7290412c303771a3158
No longer needed now init listens for property changes on a
separate thread.
Bug: 186580823
Bug: 191646246
Test: Boot test
Change-Id: I7e5e12c4422aa516cd9d8c63b1e5be37b6aa80bf
Bug: 176195960
Test: no Permission denied while accessing the file node
Signed-off-by: Jack Wu <wjack@google.com>
Change-Id: Ia70c110de8bc1b6166c57e9c3df3d4f43f23a428
The cancelling behavior in MTP has two behaviors.
1. cancel requests one by one
2. batch cancel all requests
This patch will set the property to true to enable
batch cancel all requests.
Bug: 181729410
Test: build pass
Change-Id: I8d92cc676ff7be8fd22a574b32653bafc028b801
SurfaceFlinger IPC improved with mid and big cores, relaxing cpuset will
help improve its efficiency. For render engine, we set uclamp.min to
skip scheduling on little cores.
FWIW, we let the RT scheduler figure out what is good for perf/power.
Bug: 170507315
Bug: 191054286
Test: Build and boot
Signed-off-by: Wei Wang <wvw@google.com>
Change-Id: I880cf549e33a3a2f629e8260366c4ce8c34c3ae6
Specify ownership to system and r/w permissions to user/group.
Allows dumpstate to access /dev/trusty-log0.
Bug: 188285071
Test: lshal debug android.hardware.dumpstate@1.1::IDumpstateDevice/default trusty
Change-Id: I935cb9dd11d1e0968ab0e2c9d7349de336502e7c
The cancelling behavior in MTP has two behaviors.
1. cancel requests one by one
2. batch cancel all requests
This patch will set the property to true to enable
batch cancel all requests.
Bug: 181729410
Test: build pass
Change-Id: Iad744e27e6f843ae22fc499efbb803be51e1b820
This reverts commit b6c4f766b748af81d502cf031c75b2c6c4c7cf09.
Reason for revert: switch to use ro.boot.hardware.sku for judgement
Bug: 188396079
Change-Id: I012b2d32d9b7245fd1d1be5a00c5e922a1f52d19
Give local_hbm_mode node sutiable permission to allow
hwcomposer to set local_hbm_mode to display driver.
Bug: 184768835
test: check file node permission
Change-Id: I2e5dcd87ba27a1ccf8de14a12472ba806833ed12
Bug: 172793258
Test: built and booted on oriole, tethering still works
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Change-Id: Iff304938e57e28b3a62784fbd0b226a20e0f53cc
