dock-defend is enabled in kernel code.
Bug: 262322247
Test: dock-defend is enabled by default
Change-Id: Ibbd83fc2442e2a6d68d7f506ccd29d452947931c
Signed-off-by: Jack Wu <wjack@google.com>
the file node was removed so also remove these
dummy setting
Bug: 260806701
Change-Id: I23044f7f32cf4b2b2cc93205ec5751525f05ee7f
Signed-off-by: Chungkai Mei <chungkai@google.com>
To enhance system performance and save power, chagne idle governor to TEO.
Test: boot to home
Bug: 175800838
Signed-off-by: Chungkai Mei <chungkai@google.com>
Change-Id: I591c1ff8d0c9ed8d5a3b4861c9c5b715ed1c3eae
The folder will be used for place the necessary libraries that used by
catpipe functions.
Bug: 249274299
Test: build pass, check the folder with user build
Change-Id: I275af8e716de8dc433f0b43afb20866a9eff8642
Move charger pixel-thermal-symlink from common to project folder
to prevent the GKI version dependencies from blocking init.
Bug: 240897207
Test: thermal_symlinks worked properly in charging mode
Change-Id: I0d3b03c9add57b14f255eb66a1a7a46fa6c4b257
The correct path should be under /data,
or it is not writable.
wpa_supplicant now support p2p overlay configuration, a unified
wpa_supplicant init entry can be used.
Bug: 238601241
Test: create a group and check this group is persisted
after reboot
Merged-In: I3c5523626de22c26cb562c03e9fbd7aabf6d98e7
Change-Id: I3c5523626de22c26cb562c03e9fbd7aabf6d98e7
Test: Tested with tablet with dock. Userspace is able to read
and clear sysfs node successfully
Bug: 218802317
Signed-off-by: Prasanna Prapancham <prapancham@google.com>
Change-Id: I1e97920ff0e810ce2888102f3971b21aabc55909
User will enable/disable this feature from UI setting
Bug: 239889098
Test: dock-defend is disabled by default
Signed-off-by: Jack Wu <wjack@google.com>
Change-Id: I25376ce6174e4e09ed4a7ce8f1258dc099da4cd8
1) for projects with device specific modules, this property should only
be set while device modules been loaded.
2) also remove "wait_for_prop vendor.device.modules.ready 1" to prevent
infinite wait
3) migrate vendor.all.modules.ready/vendor.all.devices.ready to
init.insmod.<DEVICE>.cfg and set these proprieties while .cfg not
exist
Bug: 238853979
Signed-off-by: Robin Peng <robinpeng@google.com>
Change-Id: I17aa42ef0a459c33871891e5036edf7eea57e39a
SOFT_OCP_TPU/GPU/CPU are no longer used. Clock divider ratio should
also be set accordingly.
Bug: 234275748
Test: Boot and verify
Signed-off-by: George Lee <geolee@google.com>
Change-Id: Icb45b4f30605efaae72bef3ccd1c3d82df8b71a7
To aligned with P22 to move charger thermalHAL setup into common code
Bug: 200615564
Test: build pass and boot to home
Change-Id: Idfe47fe64e4c158f27cd587ca8d768e13292c361
Need to meet energy certification test requirement which needs to
be able to charge FULL.
Bug: 235437635
Test: can charge to full on dock in charger mode
Signed-off-by: Jack Wu <wjack@google.com>
Change-Id: I9f92cffdefbeef8e3671812dbc2891d4fef71230
This reverts commit 980650080a.
Reason for revert: Since the vendor.thermal.symlinks is init early than google-module init
such as gpu cooling, the gpu cooling is not ready while creating thermal.symlinks.
Thermal-hal GPU thermal throttling will fail because there is no thermal-gpufreq-0 in thermal.symlinks.
Bug: 200615564
Test: thermal symlinks can be created in dev folder
Change-Id: Ia3b0999c7a8038f7be5e2390926ff74473c0c339
Let vendor_init adjusted the cpusets by device config from the
server. Allow us to study the performance and power impacts
by various experiment settings.
Bug: 223685902
Test: adb remount ; adb push init.gs101.rc /vendor/etc/hw/ ; adb reboot
Test: change persist.device_config.vendor_system_native.<group>_cpuset and check /dev/cpuset/<group>/cpus is also modified
Change-Id: I73369f2cef7b999cb380278503a4dbfcc4cff3cd
to reduce boot time, boost ddr freq when booting
and reset it after booting.
Bug: 230586904
Test: pass
Signed-off-by: chungkai <chungkai@google.com>
Change-Id: I25b30d22a4803aeb6e27b914e07f6eb8458e0a50
This fixes the permissions for the [067]-001f and [178]-002f raw i2c
numberings for the P21-mainline driver which doesn't use the i2c vendor
hook to rename these numberings. This is required for the thermal hal to
work.
Bug: 231155356
Signed-off-by: Will McVicker <willmcvicker@google.com>
Change-Id: I2341c78b2ab146713a171eeb436f34c1c8839c6e
set 160 back to 161 since RT task will select
little cores
Test: build pass
Bug: 230247757
Signed-off-by: chungkai <chungkai@google.com>
Change-Id: I2a1e761370a686e0e3c11202de93d5fd91e47b56
update new boost uclamp value since we update
cpu capacity
Test: PTS UIBench has no obvious difference
Bug: 224649226
Signed-off-by: chungkai <chungkai@google.com>
Change-Id: Ie2fd9950a98f9786b03ef4e364fd9d584dcc438d
