This also change the sequence of run_rawcap_read_all
and run_self_rawcap_read_all to last. Because these
two commands need to run selftest first to read data,
this will make ambient update to make other raw data with
differen baseline.
Bug: 195111369
Test: check touch data in bugreport.
Signed-off-by: Super Liu <supercjliu@google.com>
Change-Id: I4693b099fbc98d80fbe166525773e3ab803c98d8
Enable support for height/width swap so that vertical videos
with supported resolution can be played with HW AV1 decoder.
bug: 195409679
Test: AV1 video playback in vertical as well as horizontal orientation.
Signed-off-by: Vinay Kalia <vinaykalia@google.com>
Change-Id: I939f6a0dc432f6b1c92a1e818647afb66c20d856
Enabling batoilo thermal zone.
Reduced soft_ocp_warn per bug 184739333.
Bug: 194240210
Test: Local test: flash and boot
Signed-off-by: George Lee <geolee@google.com>
Change-Id: I4cad70946af1cd8ffd2131df9f505dac49b8c8f8
Add 3 Apps to the home screen hotseat
AndroidTestTool
LabelBarcode
BatteryChargeTool
Bug: 194880256
Change-Id: I52c77ac7bbcd5e7bded9ea8687bda14f7aa7e4f9
Start bootanimation explicitly by name. Let animation start before
surfaceflinger to avoid the condition ctl.start bootanim queued after mount_all command.
Bug: 193726798
Bug: 191910503
Test: boot test
Change-Id: Id0d276ac8bca39c6ac1dae2b2d542107a9522b91
This reverts commit ce6f6da1587615240b7cd2582209c6838cb3bec8.
Reason for revert: Due to b/194243206, TTY shall keep supporting for WCDMA/GSM devcie. Thus revert this CL for pixel 2021 and after.
Bug:194243206
Test: b/194243206#comment22
Change-Id: I650eb50a12bebcd55d04a4ab18bf1d78480a0af5
Use the default chosen by the block layer (64). The purpose of this patch is
to reduce storage latency. Without this patch:
# grep -aH . /sys/block/sd*/queue/nr_requests
/sys/block/sda/queue/nr_requests:256
/sys/block/sdb/queue/nr_requests:64
/sys/block/sdc/queue/nr_requests:64
/sys/block/sdd/queue/nr_requests:64
With this patch applied:
# grep -aH . /sys/block/sd*/queue/nr_requests
/sys/block/sda/queue/nr_requests:64
/sys/block/sdb/queue/nr_requests:64
/sys/block/sdc/queue/nr_requests:64
/sys/block/sdd/queue/nr_requests:64
Bug: 194450129
Test: Built Android images and installed these on an Android phone.
Change-Id: I236874f3791d62a2d5faf0d37a149025639f5c4a
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Dump state2power table in cooling_device
Bug: 189488358
Test: local test and state2power table can be dumped.
Change-Id: Ifb9a8e41158c5452b2f6e856d30ac97011460298
Signed-off-by: David Chao <davidchao@google.com>
Enable the FP HAL to read from the mfg_data partition chowning to system
Bug: 193549276
Test: sideload cal with valid signature. auth. enroll.
Change-Id: I0897e545dc368782587ae031716012a806d05485
Leaving maxpower at default i.e. 2mA prevents the phone from
charging from SDP ports. Setting this to 900mA. Kernel would
then set the current limit to 500/900mA based on the configured
speed.
Bug: 194722479
Test: Boot to recovery; Through uart cat maxpower;
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Change-Id: I763c70eb5d19f74e6e846155af69c25ca3e91f85
Since we have 8G/12GB ram, increase swap size from 2G to 3G
since 3G swap shows best result.
note: we had used 2G swap for even 4G ram devices.
Bug: 187488125
Signed-off-by: Minchan Kim <minchan@google.com>
Change-Id: Iea8ab1126c378cd02a89c2ef982262431c894487
Bug: 194386750
Test: no Permission denied while accessing the file node
Signed-off-by: Jack Wu <wjack@google.com>
Change-Id: Ia399e59a2f7098147522161d5c7458545febfb77
So devices not supporting CDMA don't include the feature by mistake.
Bug: 194307361
Test: inspect build artifacts - telephony.cdma.xml is included
Change-Id: I0fe3a3624d2cda2b57347402d62e8a16513174e5
Merged-In: I0fe3a3624d2cda2b57347402d62e8a16513174e5
(cherry picked from commit d808d99ce089ca4c7ff4e2abe8ee76b4eeb38a64)
Update usb_pwr_therm2 emul_temp control to allow
vendor.disable.usb.overheat.mitigation.control to disable/enable
usbc-port throttling to prevent device offline during thermal
mitigation test in lab.
Bug: 194252201
Test: setprop vendor.disable.usb.overheat.mitigation.control 0/1 to
check usb_pwr_therm2 temperature reading
Change-Id: Ia522706ce32bee68596b977a3e526f0b951a95ca
high-group is running on CPU 6-7.
mid-group is running on CPU 4-5.
mid-high-gropu is running on CPU 4-7.
Move camera tasks to CPU 4-7 for 1 seconds when AP launch.
Bug: 194271751
Test: GCA
Change-Id: I8e13e9ad0057b8f42f8ed3958bf0c6d58a5a02bc
Set uclamp_min and prefer_idle to sys_group to improve 2nd init
stage boot time performance.
* original
boot_progress_start_avg: 4832.3
* with tuning
boot_progress_start_avg: 4028.75
Bug: 193192017
Test: boot test
Change-Id: I8ebd52fddceadbee22e9a8c75969d52047b2acfc
