improve camera start performace
Bug: 168654554
Test: 1. check clock freq related file when camera start
2. P21 camera checklist
Change-Id: I3447a6028846cc873e9c7195826c470bceaf03c8
Bug: 189895314
Bug: 171160755
Bug: 171670122
Bug: 180858476
Test: make sure all affected devices' armnn module has the right label
Change-Id: Ie618a5477b4e447774b20a58c9f091ae9fe529d6
This reverts commit b6c4f766b748af81d502cf031c75b2c6c4c7cf09.
Reason for revert: switch to use ro.boot.hardware.sku for judgement
Bug: 188396079
Change-Id: I012b2d32d9b7245fd1d1be5a00c5e922a1f52d19
Bug: 187912470
Test: make -j128
Test: deep buffer and compress offload via speaker, USB headset, BT
earphone
Test: phone call via handset
Test: hotword detection
Change-Id: I0385873c7087660d03ccc582f31825a901ae1b8e
Give local_hbm_mode node sutiable permission to allow
hwcomposer to set local_hbm_mode to display driver.
Bug: 184768835
test: check file node permission
Change-Id: I2e5dcd87ba27a1ccf8de14a12472ba806833ed12
ag/13790852 provides a solution to disable fw roaming if the connection
is triggered with a specific bssid.
We set config_wifiUseHalApiToDisableFwRoaming to true to enable this
feature.
Bug: 178398607
Test: Build Pass
Test: Make sure HAL api wifi_enable_firmware_roaming can disable roaming
Change-Id: Ia4b6cf80aefbce76c994532175693f38a0698a5a
Bug: 172793258
Test: built and booted on oriole, tethering still works
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Change-Id: Iff304938e57e28b3a62784fbd0b226a20e0f53cc
This reverts commit d72626741ce5faa6404f52e61408d3ce93690fa3.
Reason for revert: disable ltm to improve camera stability
Test: build pass
Bug: 189934073
Change-Id: I2a23823b8d0c5a6686e6a675f575cf8a0bbd49de
Fixed an issue to count valid L5 measurements in the L5 bias estimation process
Fixed wrong context detection issue when the first fix is made
Set group readable permission to esw-crash-dump
Added SIT_SET_GPS_STATUS IPC to inform of gps running state to modem
Fixed crash issue at ProvideLppeCapabilities() while KDDI testing
Fixed issue that gpsd send release connection request upon receiving NI message
Fixed gpsd busy loop after OnTcpConnect happend when it fails to SSL_connect() with SSL_ERROR_SYSCALL
Fixed Reset checking timer for default value of CpResetInvalidateSec to properly work
Bug: 189063756
Bug: 185203617
Bug: 189711389
Bug: 185545476
Bug: 189715043
Bug: 189730213
Bug: 188870406
Bug: 185884684
Sanity test: 190014066
Test: build pass
Change-Id: I99b7173c9f28ed5f6a05a272709f6caa4748aed1
Dumpstate will only collect always-on modem logs,
should only stop modem logging when it is always-on
Bug: 189441741
Change-Id: Icc4e1940aab774d56e51e966248985dda539890c
We have TA uclamp.min for top app, keep min boost for SF.
Bug: 190145608
Test: UiBench
Signed-off-by: Wei Wang <wvw@google.com>
Change-Id: I5f307cc7fa53c28a0ac64be83fe2234c2e04ff12
Add two more mode for power hint fine tuning.
streaming extreme targets 240fps mode and streaming low targets photo
mode.
Test:
this change is no op, so we will do the test on corresponding lyric
change (ag/14804030).
Bug: 189886881
Signed-off-by: Peter Liu <pingchienliu@google.com>
Change-Id: Icd31501347108ccb5b0ec278a92bee89f543c192
Path was missing "/" thus thermal zone soc stays enabled regardless of
charging.
Bug: 188006020
Test: Local test to check soc's mode
Signed-off-by: George Lee <geolee@google.com>
Change-Id: I62ba233ddc05f2c8c0d3bcf4f97809f9c379a757
Bug: 188365095
Test: Local Test
/dev/thermal/tz-by-name/soc # ls -la
-rw-r--r-- 1 system system 4096 2021-05-26 17:25 mode
-rw-r--r-- 1 system system 4096 2021-05-26 17:25 trip_point_0_hyst
-rw-r--r-- 1 system system 4096 2021-05-26 17:25 trip_point_0_temp
/dev/thermal/tz-by-name/soc # cat policy
user_space
Signed-off-by: George Lee <geolee@google.com>
Change-Id: I9f9cffb29ad025872d77dc2e41d893a2fb2d375a
Bug: 180711938
Test: HAL loaded and accessed attributes normally
Signed-off-by: Albert Wang <albertccwang@google.com>
Change-Id: Ic0399cfe7022cc1971fc99870d955b9308512ca8
Some GCA features perform better when running in high capacity cpus.
It is set in CAMERA_STREAMING_STANDARD, so photo mode and video mode
of 30 fps will use this setting.
Bug: 188777413
Test: ta_prefer_high_cap set correctly
Change-Id: I2fd444635a352d1c6236fd82eb82e67ca1799c97
In the feature, IA would be sent early. But it met the timing issue to
customize for TMO.
The carrier id is updated too late to set the TMO parameter correctly.
Disable the feature to unblock field test first.
Bug: 188973074
Test: Flash ROM and make sure the early camping feature is off
Change-Id: Ifd8021d4944db3437c6ff51ac417b427ce04c2a1
Integrate chpp-20210325-f908420
Added SuplNiEnable (default true) to control SUPL NI
Added google LTO license key
Fixed SUPL PDU encoding error caused by structure alignment mistmatch between gpsd and gnss
Removed A-Glonass capability from ProvideCapapbilties while running LPP CP
Protection for nullptr access while receiving CAMPING_ON_LTE status from RIL
Reduced cellInfo waiting timeout from 1.3 to 1.1 sec
Add “basebandCn0” in onchip PVT
Do not stop warmstandby timers with PE2PE_WAIT_FOR_USER_TIMEOUT after receiving assist
Fix a bug to check whether there were any valid measurements which causs GPSD crash.
Added support for SatellitePVT
Keep the received acquisition assistances even after the E911 came in during the Breadcrumb req running
Add a validity check before stopping the CW combo mode test
Bug: 179616840
Bug: 187914357
Bug: 187760198
Bug: 187673164
Bug: 187011439
Bug: 187008705
Bug: 186731449
Bug: 186499722
Bug: 186490245
Bug: 186378531
Bug: 184906297
Bug: 181831996
Bug: 178148552
Sanity Test: 189009358
Test: build pass
Change-Id: Ief497c17b7d8a2e1aa232cd892d58adff689a911
"android.hardware.renderscript@1.0-impl.so" is already removed.
Remove the declaration of corresponding passthrough HAL from the
vendor manifest as well.
Test: run vts -m vts_treble_vintf_vendor_test
Bug: 184714406
Change-Id: Id7d23003c769a5872bb316090f8b94b27bc83298
We use uclamp as importance metrics for placement, before adding a
dedicated sysfs node, let us use TA default as "1"
Bug: 170487162
Test: boot
Signed-off-by: Wei Wang <wvw@google.com>
Change-Id: I57b458fcab1c35b484b1859cea631cca7d495ac8
This reverts commit 72ef08cafa.
Reason for revert: using alternate method for original behavior change
Bug: 187261232
Test: build pass
Change-Id: I5643a4109f6e4a64d167ed9ee1ce0bc3492cea42
64-bit dex2oat uses slightly more memory in exchange for significantly improved compile time.
Test: boots, works
bug: 188906345
Change-Id: Ie91a2401504596cabacbb04b5d6b7039865c193d
On userdebug & eng builds, change the owner/group of SJTAG sysfs files
that need to be written to 'system'. This became necessary after these
files were migrated out of DebugFS, as write access to the world is no
longer supported.
Bug: 188817349
Test: Ensure that the writable files in the following directories have
'system' as their owner & group:
/sys/devices/platform/sjtag_ap/interface/
/sys/devices/platform/sjtag_gsa/interface/
Signed-off-by: Peter Csaszar <pcsaszar@google.com>
Change-Id: I4420fccd92522a48f44b80bd0a19f4a20eb32442
NormalPerformance is for system, and ServicePerformance is for
system-background.
Bug: 182509410
Test: build pass
Change-Id: Ifeec11de42fa880cd00b34d504bf6d8ff90dd15c
Add rebalance_interrupts to run at boot and rebalance interrupts.
Run once after modules have loaded and a second time after boot
has completed to ensure all interrupts have been assigned to
individual cores.
Bug: 148403062
Change-Id: I9685807e3028bef509c4064a5c09cbc48b91f7f0
