Update the logic to find the i2c bus number to use either the named i2c
devices or the static i2c bus numbers. This allows us to support both
cases -- v5.10 uses i2c-<devname> while v6.1 uses <i2c-bus#>-<reg>.
Bug: 291606723
Test: verify no errors from the usb services with v5.10 and v6.1
Change-Id: I6d41ac041ead68e72a3766e03d491bcd478468d3
Update the i2c bus numbers to use the statically assigned numbers
configured in the kernel device tree. In addition, use ueventd to set
the ACL for the i2c devices.
Bug: 291606723
Test: performance boot testing
Test: verify selinux labelling with ls -Z on the modified device nodes
Change-Id: Ib412510e4b6c086c978ad5487486323685732cae
Update the logic to find the i2c bus number to use either the named i2c
devices or the static i2c bus numbers. This allows us to support both
cases -- v5.10 uses i2c-<devname> while v6.1 uses <i2c-bus#>-<reg>.
Bug: 291606723
Test: verify no errors from the usb services with v5.10 and v6.1
Change-Id: Ia68c424a3b6579457be6cfd0d07788e9da44a86e
Update the i2c bus numbers to use the statically assigned numbers
configured in the kernel device tree. In addition, use ueventd to set
the ACL for the i2c devices.
Bug: 291606723
Test: performance boot testing
Test: verify selinux labelling with ls -Z on the modified device nodes
Change-Id: I579143fa38bc2e9b3bf7dc618b10e63001263e2e
Indicate to the kernel that the usb gadget is pulled up
by writing to `update_sdp_enum_timeout` sysfs node. Write
to this node will inform the kernel that it can lower the SDP
timeout alarm value which is used to detect an SDP port
vs a DCP.
ported from c5c5b127a7ed0db559d286284fe77b656bef6945
Bug: 275687235
Test: Check `update_sdp_enum_timeout` is written into after usb
gadget is pulled up. Verify that the alarm timeout lowers.
Change-Id: Id3ae7e7a20b236cec6604414a7f81860e868bdd0
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
1. Remove unused group "wakelock".
2. Correct the right return value on setCurrentUsbFunctions.
Bug: 266694076
Test: Boot to home and function work
Change-Id: If0925a61e481e4deca560dc8dfc1be80a76c148f
UVC is a new USB function supported in Android. This CL adds UVC as a
valid function and gives it a new pid of 0x4ee[de]. UVC function is
guarded by the property `ro.usb.uvc.enabled`. When this property is set
to false, UVC won't be considered as a valid gadget function.
Bug: 242344221
Test: Manually tested that the UVC function is successfully configured
Change-Id: I5ba45ebb11d265b843dfde21407bc5bab1d070c9
This change migrates IUsbGadget implementation to AIDL.
Bug: 261027750
Test: USB function switch success and AIDL service is running.
Change-Id: I7cc7070d875c26bc42f99aef84d5e5a41606223f
Signed-off-by: Ricky Niu <rickyniu@google.com>
For imporve USB stability, limit the current to 1.3A,
when connect to accessory.
Bug: 206635552
Signed-off-by: Ricky Niu <rickyniu@google.com>
Change-Id: I2c1091aa7111e6242cc949923fbc86f27e54e976
Since affinity permission is changed from root to system, original
permission change by script can't be used. Therefore, this patch
will move the functionality to usb gadget hal.
Bug: 224699556
Test: dwc3 irq could be located in medium/big cores after USB function switch
Change-Id: Id993db9fc303e85a9a6337a0e41b1dfd6fc9a86a
Merged-In: Id993db9fc303e85a9a6337a0e41b1dfd6fc9a86a
(cherry picked from commit f363704a92fd7611cf01c8b3bcaf6e8913255207)
Since permission change in hal rc may be late, gadget
hal would enable USB function failed. The solution will
change the permission before USB gadget hal starts.
Bug: 224699556
Test: build pass and verified pass
Change-Id: I45c1318f647220480fa03ba3b813a81b21393d71
Merged-In: I45c1318f647220480fa03ba3b813a81b21393d71
(cherry picked from commit b30924e3599f2e92aeae498a6ae15d3b9a397930)
This change migrates IUsb implementation to AIDL.
Also, IUsb and IUsbGadget now run in its own processes
to improve stability and isolation.
Bug: 200993386
Bug: 199357330
Change-Id: I02753af4a41916b77ce110f9531504bf8c6a4691
