Enabling batoilo thermal zone.
Reduced soft_ocp_warn per bug 184739333.
Bug: 194240210
Test: Local test: flash and boot
Signed-off-by: George Lee <geolee@google.com>
Change-Id: I4cad70946af1cd8ffd2131df9f505dac49b8c8f8
Start bootanimation explicitly by name. Let animation start before
surfaceflinger to avoid the condition ctl.start bootanim queued after mount_all command.
Bug: 193726798
Bug: 191910503
Test: boot test
Change-Id: Id0d276ac8bca39c6ac1dae2b2d542107a9522b91
Use the default chosen by the block layer (64). The purpose of this patch is
to reduce storage latency. Without this patch:
# grep -aH . /sys/block/sd*/queue/nr_requests
/sys/block/sda/queue/nr_requests:256
/sys/block/sdb/queue/nr_requests:64
/sys/block/sdc/queue/nr_requests:64
/sys/block/sdd/queue/nr_requests:64
With this patch applied:
# grep -aH . /sys/block/sd*/queue/nr_requests
/sys/block/sda/queue/nr_requests:64
/sys/block/sdb/queue/nr_requests:64
/sys/block/sdc/queue/nr_requests:64
/sys/block/sdd/queue/nr_requests:64
Bug: 194450129
Test: Built Android images and installed these on an Android phone.
Change-Id: I236874f3791d62a2d5faf0d37a149025639f5c4a
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Bug: 194386750
Test: no Permission denied while accessing the file node
Signed-off-by: Jack Wu <wjack@google.com>
Change-Id: Ia399e59a2f7098147522161d5c7458545febfb77
Update usb_pwr_therm2 emul_temp control to allow
vendor.disable.usb.overheat.mitigation.control to disable/enable
usbc-port throttling to prevent device offline during thermal
mitigation test in lab.
Bug: 194252201
Test: setprop vendor.disable.usb.overheat.mitigation.control 0/1 to
check usb_pwr_therm2 temperature reading
Change-Id: Ia522706ce32bee68596b977a3e526f0b951a95ca
high-group is running on CPU 6-7.
mid-group is running on CPU 4-5.
mid-high-gropu is running on CPU 4-7.
Move camera tasks to CPU 4-7 for 1 seconds when AP launch.
Bug: 194271751
Test: GCA
Change-Id: I8e13e9ad0057b8f42f8ed3958bf0c6d58a5a02bc
Set uclamp_min and prefer_idle to sys_group to improve 2nd init
stage boot time performance.
* original
boot_progress_start_avg: 4832.3
* with tuning
boot_progress_start_avg: 4028.75
Bug: 193192017
Test: boot test
Change-Id: I8ebd52fddceadbee22e9a8c75969d52047b2acfc
To support USB port overheat protection, we need to launch thermalHAL in
off charging mode.
Bug: 183573049
Test: verified usb port overheat protection in off charging mode with
emul temp
Change-Id: I0b36646d9779c2c1a25f38aafea5ca178bf91be1
We have seen cases SF main thread running longer occasionally which may
run in danger of missing frames. This CL lifts cpufreq for SF when touch
boost is active to compensate the sudden jump of its cpu demand.
Bug: 192099706
Test: Build
Signed-off-by: Wei Wang <wvw@google.com>
Change-Id: I49b2d589249f60a38eab907afbadfbcfdd233d1c
Allow to thermalhal to update trip points for neutral_therm which is the
triggering sensor of virtual skin sensor for o6 proto.
Bug: 193373779
Test: neutral_therm can be updated to the correct threshold
Change-Id: I16dcd44ce9e69f456df322664756dc74357bf50b
This is to expose a common path to runtime.
Test: Manual. Verified edgetpu_logging works with modified path
Bug: 191193044
Signed-off-by: Erick Reyes <erickreyes@google.com>
Change-Id: I11865108931443d96389640c89b6cc29aee3a634
No longer needed now init listens for property changes on a
separate thread.
Bug: 186580823
Bug: 191646246
Test: Boot test
Change-Id: I7e5e12c4422aa516cd9d8c63b1e5be37b6aa80bf
Bug: 176195960
Test: no Permission denied while accessing the file node
Signed-off-by: Jack Wu <wjack@google.com>
Change-Id: Ia70c110de8bc1b6166c57e9c3df3d4f43f23a428
SurfaceFlinger IPC improved with mid and big cores, relaxing cpuset will
help improve its efficiency. For render engine, we set uclamp.min to
skip scheduling on little cores.
FWIW, we let the RT scheduler figure out what is good for perf/power.
Bug: 170507315
Bug: 191054286
Test: Build and boot
Signed-off-by: Wei Wang <wvw@google.com>
Change-Id: I880cf549e33a3a2f629e8260366c4ce8c34c3ae6
This reverts commit b6c4f766b748af81d502cf031c75b2c6c4c7cf09.
Reason for revert: switch to use ro.boot.hardware.sku for judgement
Bug: 188396079
Change-Id: I012b2d32d9b7245fd1d1be5a00c5e922a1f52d19
Give local_hbm_mode node sutiable permission to allow
hwcomposer to set local_hbm_mode to display driver.
Bug: 184768835
test: check file node permission
Change-Id: I2e5dcd87ba27a1ccf8de14a12472ba806833ed12
Bug: 188365095
Test: Local Test
/dev/thermal/tz-by-name/soc # ls -la
-rw-r--r-- 1 system system 4096 2021-05-26 17:25 mode
-rw-r--r-- 1 system system 4096 2021-05-26 17:25 trip_point_0_hyst
-rw-r--r-- 1 system system 4096 2021-05-26 17:25 trip_point_0_temp
/dev/thermal/tz-by-name/soc # cat policy
user_space
Signed-off-by: George Lee <geolee@google.com>
Change-Id: I9f9cffb29ad025872d77dc2e41d893a2fb2d375a
Prefer high cap will choose the mid / high cores when possible with
consideration of energy efficiency.
Running task on high cores with low clock is more efficient than running
at little core with high clock.
This hint also addresses CTS issues with keeping latency_sensitive = 1.
(equivalent to prefer idle)
This hint adds:
1) Enable prefer_high_cap of camera vendor group
2) Set high_capacity_start_cpu to 4
4) Set MemFreq floor
5) Change camera-daemon/cpu.uclamp.latency_sensitive owner to root
Bug: 186564130
Test:
android.hardware.camera2.cts.RobustnessTest#testAeAndAfCausality (5/5)
android.hardware.cts.CameraTest#testPreviewCallback (5/5)
android.hardware.camera2.cts.CameraDeviceTest#testCameraDeviceRepeatingBurst (5/5)
android.hardware.cts.CameraTest#testFocusDistances (3/6). (3/6) without CL.
*****************************************************************
raven Camera CTS Test Results
*****************************************************************
Tests Passed: 217, Failed: 0, Not found: 0, Status unknown: 0
Change-Id: Ia2abb0eb9c57fa05c4db7bf1d02053e303301781
This reverts commit 3a0efffdbc722cb8a9684ce3c0080d2476c0abb8.
Reason for revert: This CL causes performance/frame drop issues which leads to more CTS flakiness.
Bug: 188462637
Bug: 185233206
Test: Camera CTS
Change-Id: I1796ba29da0e2c19874531bda8c21bc10e248055
Bug: 188110823
Test: Ensure that Dwell-Defend can trigger with 'setprop
vendor.battery.defender.threshold 61'
Change-Id: I4782e2c387b147fc48cf4134d27af8675964dc44
