aml_tz6_351400020 (13155446,com.google.android.go.tzdata6,com.google.android.tzdata6)
# -----BEGIN PGP SIGNATURE-----
#
# iF0EABECAB0WIQRDQNE1cO+UXoOBCWTorT+BmrEOeAUCZ9i73wAKCRDorT+BmrEO
# eE0jAJ9LUlDeVJV2JVbzsyWRdWRRhpFGkwCfbEbrFRYUgH7HHshxtjQlrRTLJ/U=
# =bAod
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue Mar 18 02:18:39 2025 EET
# gpg: using DSA key 4340D13570EF945E83810964E8AD3F819AB10E78
# gpg: Good signature from "The Android Open Source Project <initial-contribution@android.com>" [ultimate]
# By Piotr Klasa (4) and others
# Via Android Build Coastguard Worker (9) and others
* tag 'aml_tz6_351400020': (21 commits)
Enable usb state update via udc sysfs
usb: fix usb state path in host mode
usb: migrate UsbDataSessionMonitor to libpixelusb
Use 2025-03-01 deqp level for GLES
Use 2025-03-01 deqp levels for Vulkan
Revert "Use 2025-03-01 deqp levels for GLES and Vulkan"
Use 2025-03-01 deqp levels for GLES and Vulkan
move common init perf settings to gs_common
Revert "move common init perf settings to gs_common"
move common init perf settings to gs_common
Enable open source multi akm for specific Broadcom project
pixelstats: gs101: remove firmware update path
init-display-sh: Allow writing to kmsg
Remove ResetUclamp profiles
Update IDisplay to V13-V14
display-dump: make display dump project-specific
Refactor: Use googleDeviceConfig namespace in gs101 BoardConfig
dump_power: add battery caretaker dump into bugreport
Set initial value for foreground_window group
Move all vendor_sched parameters and permissions to init.pixel.perf.rc
...
Change-Id: I296bc05a0b9bc48ee3ca478f305e7ab76f5941ee
Android 15.0.0 Release 20 (BP1A.250305.019)
# -----BEGIN PGP SIGNATURE-----
#
# iF0EABECAB0WIQRDQNE1cO+UXoOBCWTorT+BmrEOeAUCZ8eo6wAKCRDorT+BmrEO
# eAiMAJwKoTVsPgds031Rdi11ZDZR0sHrUwCfQiM0q3/561pqrsmmLP9YPULFyzc=
# =YB0/
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed Mar 5 03:29:15 2025 EET
# gpg: using DSA key 4340D13570EF945E83810964E8AD3F819AB10E78
# gpg: Good signature from "The Android Open Source Project <initial-contribution@android.com>" [ultimate]
# By Herbert Xue (3) and others
# Via Android Build Coastguard Worker (30) and others
* tag 'android-15.0.0_r20': (30 commits)
dump_power: add battery caretaker dump into bugreport
update health HAL dependency
Add sched qos support
Change TARGET_RECOVERY_UI_LIB to use fully qualified names in gs101
Change TARGET_RECOVERY_UI_LIB to use fully qualified names in gs101
Clean up unnecessary data_connection_5g_plus overlay
init: gs101: move sched rate limit to late init
Set soong config variables for libExynosC2H263Dec and libExynosC2H263Enc
Disable Wifi BugReport for subsystem restart
init: make pmu_poll_enable node readable
Set soong config variable "board_use_dec_sw_csc" for libExynosVideoCodec
Switch to using gs101 instead of valhall for GPU UMD
Update ldaf sensor device filename
dump_power: gs101: correct dump path
Move video_codec soong config variables into board config
dumpstate: gs101: fix dump path
Revert "Add IGoodixFingerprintDaemon aidl interface"
Add IGoodixFingerprintDaemon aidl interface
Set BOARD_LIBACRYL_G2D_HDR_PLUGIN for soong
Add a soong config variable for CitadelProvision
...
Change-Id: Id9e92997364278af84bc79ca08631451f93c2123
compared to ag/31352563 I did not transfer the settings for "write /sys/devices/system/cpu/cpuidle/current_governor teo", which caused the problem
Test: Verified if all values of transferred settings are as they should be after rebooting the device, and and checked that there are no new selinux errors for hal_power_default, verified all metrics that caused power regression in the previous commit on abtd
Bug: 335874870
Flag: EXEMPT not supported by this component yet
Change-Id: I7ad8dbd7fd2783017c5bae8181008db32b95e9b7
Test: Verified if all values of transferred settings are as they should be after rebooting the device, and and checked that there are no new selinux errors for hal_power_default
Bug: 335874870
Flag: EXEMPT not supported by this component yet
Change-Id: I7054fb3ab6f8fce9cf06c7691e8e1aea2453ca88
modprobe would log errors to /dev/kmsg, need to explicit allow this.
Bug: 388717752
Test: DeviceBootTest#SELinuxUncheckedDenialBootTest
Change-Id: Iecb9d45e5ef08edc04c87d8f1375803c1df11621
For multi-window foreground app group.
Bug: 200769420
Change-Id: I2b65feb4732e33b27155dcfaf0b64a38b1b01026
Test: build pass
Flag: NONE vendor init file does not support flag
Bug: 335874870
Test: Checked that permissions and values for all affected files are correct (ls -l, cat)
Flag: EXEMPT not supported by this component yet
Change-Id: I00fa4d3c3f1d7bb3e7c19f94c87dc8c541ebdc85
Android 15.0.0 Release 6 (AP4A.241205.013)
# -----BEGIN PGP SIGNATURE-----
#
# iF0EABECAB0WIQRDQNE1cO+UXoOBCWTorT+BmrEOeAUCZ1IssQAKCRDorT+BmrEO
# eGa9AJ9S393zD4Z4CQI9oOclVnRfCsHaLgCfbXxKi0MvtDq9g45UD8Ky0b+lJWU=
# =4D5T
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri Dec 6 00:44:01 2024 EET
# gpg: using DSA key 4340D13570EF945E83810964E8AD3F819AB10E78
# gpg: Good signature from "The Android Open Source Project <initial-contribution@android.com>" [marginal]
# gpg: initial-contribution@android.com: Verified 2484 signatures in the past
# 3 years. Encrypted 4 messages in the past 2 years.
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 4340 D135 70EF 945E 8381 0964 E8AD 3F81 9AB1 0E78
# By Krzysztof Kosiński (3) and others
# Via Android Build Coastguard Worker (31) and others
* tag 'android-15.0.0_r6': (30 commits)
Delete TARGET_CPU_VARIANT_RUNTIME.
Add input event profile to mitigate input latency of input threads
gs101: avoid vector<const T>
Delete PRODUCT_FULL_TREBLE_OVERRIDE.
Switch from the BFQ to the mq-deadline I/O scheduler
bcl: remove charging debugfs data logging
extended_log: update directory permissions for gs101
Delete mapper4 manifest
Define use_hwc2 variable
usb: correct sys.usb.controller sysprop
bcl: revision for kernel6.1
Revert "Enable KUnit testing on raviole userdebug & eng build target."
BoardConfig-common.mk: Enable Lazy RCU
Remove BCL from thermal
Add FSTAB_OWNERS and update OWNERS to include Android.bp
Use modules.load for vendor ramdisk modules
Upgrade IDisplay to V13
Add soong config variable for PowerAnomalySitril
[Pixel RR] Apply reviewed default permissions
gs101: video: change to use c2 "default" AIDL service
...
Conflicts:
BoardConfig-common.mk
dumpstate/dump_gs101.sh
Change-Id: I765d41354f48b0ebd60411935d591da961e9167c
Add task profiles and set permissions.
Bug: 355612114
Flag: NONE init rc file does not support flag
Test: build pass
Change-Id: I44ab2097bbf919c1487d40ee68e74100c11b8891
Since pixel performance has a shared configuration,
we need to move override values into late init.
Bug: 381100494
Test: Boot
Flag: EXEMPT bug fix
Change-Id: I28ce81103249f30046d6e22b57be77441bc910b0
LDAF sensor device filename changed after kernel upgrade
from v5.10 to v6.1 in some of our in-market devices.
We need to update the device filename to access the LDAF
with this new kernel version.
Bug: 378045567
Test: Open camera, and observe available LDAF sensor in logs
Flag: EXEMPT bugfix
Change-Id: I4bed0358263910d1312238a8e109afb75517d8c2
Bug: 347122505
Test: check the priority and latency of input thread in Perffeto
Flag: NONE early device setting updates
Change-Id: I0c0a39e3fc03d8df4e9e87cf61fb8e1dafcfc996
The mq-deadline I/O scheduler is more stable than BFQ. Additionally, the
boot time is shorter with the mq-deadline I/O scheduler. It only changes the scheduler on new kernel.
Bug: 186902601
Test: forrest build
Change-Id: I9433d73e7ed4bfd5e72a0f8318e959373e76202e
Signed-off-by: Ocean Chen <oceanchen@google.com>
system/core/init/init.cpp SetUsbController picks the first udc device if
there're multiple udc devices present on the system to populate
sys.usb.controller system property.
CONFIG_USB_DUMMY_HCD enabled in kernel-5.10 GKI would introduce a
dummy udc device named "dummy_udc.0". Depends on timing, the dummy
device might be picked up by the init process and incorrectly populate
sys.usb.controller.
This issue only applies to devices on kernel-5.10 GKI, the WAR is to
overwrite the sysprop if it's incorrectly populated by the dummy udc.
Bug: 333778731
Test: tested on Cheetah
Flag: EXEMPT bugfix
Change-Id: Idefd1a5d8154a51792c6cb52ee6d11cbb7f6df78
Remove irrelevant copy and paste content. None of the gs101
devices ever included these services and these sockets are
not doing anything.
Bug: 234559097
Test: presubmit
Flag: EXEMPT dead code removal
Change-Id: I6fdab1e2232f83c0286d5f33773aaa17f9da3f7a
move the rfkill permission setting from post-fs-data to early_boot
stage because the kernel/net/rfkill/rfkill.ko may not be loaded on
post-fs-data stage and cause the permission setting failed.
Bug: 277148159
Test: m
Change-Id: I65f0593caddbe659528877f583917cdaead1756b
With uclamp changes against margins, we need to bump this value by 1.25
to retain previous boost.
Bug: 314123492
Signed-off-by: Qais Yousef <qyousef@google.com>
Change-Id: I0b001772116bdbc2285e942b5795451dee925eda
Revert GPU clk divider ratios.
Bug: 324534203
Test: Confirm no DATA_INVALID_FAULT while running GFXBench under stress
Change-Id: I9379988d68665924de72441bc0ea24f5fc12be4d
Signed-off-by: George Lee <geolee@google.com>
Update i2c device paths with static bus numbers.
Also remove some redundant paths.
Bug: 323447554
Test: Boot to home
Change-Id: I90a723018f6628c825e97ff75a80350843684959
Setting the owner of /dev/logbuffer_cpif as system to allow the
dump_modem script to read the logs as part of bugreport
Test: Tested bugreport on device
Bug: 305600375
Change-Id: I20c1a843edadbc4ed2da51af3e242957b5849d6b
Signed-off-by: Mahesh Kallelil <kallelil@google.com>
After USB enumeration, some SD card readers do not send signals to the
device when the SD card is inserted or removed.
To support SD card hotplugging, this patch enables in-kernel
media-presence polling, which will check the SD card status every 2
seconds after a SD card reader is attached.
Bug: 186479576
Test: SD card insertion/removal and data copy (see b/301566595)
Change-Id: I29c352696cd9d31168a8eac8c58d23adb484f5d0
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Set `avb_keys=no_such_key` for the vendor_dlkm dynamic kernel partition
to allow booting unlocked devices with a custom kernel. This allows a
few things:
1) Dogfooders can flash a custom kernel without wiping their device.
This can help developers track down hard-to-reproduce bugs without
rolling out a patch to the whole dogfooder population.
2) Developers can uprev their device's kernel without wiping their
device or packaging the kernel with an Android platform build.
Note: we are using "no_such_key" to ensure an AVB keys file doesn't
accidentally get created.
Test: Flash CI build. Then flash custom kernel on top.
Bug: 274825778
Change-Id: Iee542cf5ab4973ee9cb2c1fe66d00b642fdf525b
Vendor sched procfs path hierarchy gets updated in kernel.
Update the paths in init rc file and task profiles to match the change.
Bug: 289151587
Test: UIbench ab test
Change-Id: I6f8aa26587578860483d6ededf88e9c04a926644
Update the i2c bus numbers to use the statically assigned numbers
configured in the kernel device tree. In addition, use ueventd to set
the ACL for the i2c devices.
Bug: 291606723
Test: performance boot testing
Test: verify selinux labelling with ls -Z on the modified device nodes
Change-Id: Ib412510e4b6c086c978ad5487486323685732cae
Change the owner and group of the DRM module debug file to system to
grant permission for hwcomposer.
Bug: 301599195
Test: check HWC can access it
Change-Id: I76cb73cf9149347d486354abf8c9fc7d165e1bea
Update the i2c bus numbers to use the statically assigned numbers
configured in the kernel device tree. In addition, use ueventd to set
the ACL for the i2c devices.
Bug: 291606723
Test: performance boot testing
Test: verify selinux labelling with ls -Z on the modified device nodes
Change-Id: I579143fa38bc2e9b3bf7dc618b10e63001263e2e
